PORTABLE HARDNESS TESTERS
Contents
1. Rmin 1 Min Workpiece weight 2 5kg on stable support 0 05 2kg with compact coupling except C and G impact device Workpiece min thickness 5mm except with impact device coupled G 10mm C 1mm Workpiece min case 0 8mm except C impact device 0 2mm hardened depth and G impact device 1 2mm Power Rechargeable NiMh battery pack Charger 12V 600mA 1 8VA SUPPORT RINGS Charging time 2 5 4 hours Operating temperature to 40 C Overall dimensions 235mm x 90mm x 47mm Weight 15gr incl impact device and printer e w Wi QU ORDER DETAILS HARDNESS TEST BLOCK TH 110 D Portable hardness tester with built on printer and external D probe T T PORTABLE HARDNESS TESTER ROCKY TH 160 Tn amp ROCKY TH 160 PORTABLE HARDNESS TESTER WITH BUILT IN PRINTER FEATURES Modern high end variant of the ROCKY TH 110 with additional features Easy operating due to intuitive menu system Fast super silent built in printer Large memory for 1000 tests Auto recognition of connected Impact Device Auto recognition and gravity compensation of Impact Device test direction Statistical data and upper lower limit setting Prints all test results and histogram RS 232 interface to hyperterminal Time and date setting Back light LCD Direct display of hardness scales Rockwell HRB HRC Vickers HV Brinell HB Shore HS Leeb HL Conversion to tensile str2. INNOVATEST offers a wide range of portable hardness testing instruments Most of the common testing methods are represented in this catalogue Portable instruments often offer an excellent alternative if the workpiece is too heavy or too large to be tested on a bench hardness tester Reliability Its often understand by the public that portable hardness testing instruments are less reliable or less accurate than bench type hardness testers This however is a misunderstanding Portable hardness testers considering to be manufactured according to the applicable standards are as accurate as bench hardness fester The importance of portable instruments is that they should be applied in a correct manner respecting the testing conditions as advised for the praticular testing method Misuse is often laying on the basis of wrong values obtained by portable testing instruments Another recent problem is that there are many cheap poor quality portable testing instruments available on the market Such instruments offer promising specifications which in many cases cannot be reached or can be reached but only for a short period of the life time of such instrument It is strongly recommended to buy portable testing instruments that are covered by a decent service system offering regular checks and which have a proven track record of reliability and quality Portable testing methods Most common testing methods are the Leeb hardness rebou
3. The large clearly marked dials on this type of instruments covers a full range of hardness values in Vickers Brinell Rockwell A B C and Kp mm according to the British American and German specifications The instrument The system is entirely mechanical employing the use of special preloaded springs which provide a load of about 15kg to the diamond Maximum penetration of the diamond into the specimen is O 125mm 005 Operation and use The simplicity of the tester enables it to be used in almost any direction preferably vertically without affecting accuracy It can be used site The grips are depressed to the fullest extent by using the palms of the hands and the hardness value can be read off the appropriate scale Diamond indentor The instrument does not require any regular servicing Should the diamond indentor become damaged a new indentor can simply be fitted using the small tool supplied with the instrument Precision bench stand Bench stand with vee base for round parts available as an option QININI ATEST BH WE U W TECHNICAL SPECIFICATIONS STANDARD DELIVERY Code No Scale Range e Instrument POROOO 1 No 1 Vickers Pyramid 100 1000 e UKAS Reference hardness block Brinell 100 500 Case Rockwell C 20 70 e Adjuster key POROOO2 No 2 Rockwell A 40 85 NNOVATESTS certificate Rockwell B 50 100 Manual Rockwell C 20 70 POROO03 No 3 Vickers Pyramid 100 1000 Brinell 100
4. 152 Needle front section Diameter 4 2mm of DL device TH 154 Length 50mm Workpiece max hardness value 940HV TH 150 1000HV 152 or 95 154 Workpiece radius Rmin 50mm with support ring Rmin 1Omm Workpiece minimum weight 2kg 5kg on solid support 150 154 0 05kg 2kg with coupling paste 0 5 1 5 on solid support TH 152 0 02 0 5kg with coupling paste Workpiece min 5mm TH 150 154 or 1mm 152 thickness coupled Workpiece min case 0 8mm TH 150 154 hardened depth or 0 2mm 152 Indentation depth See Impact devices data Continuous working time 300 h without backlight Power Battery Lithium 3V CRZ2AA Operating temperature O C to 40 C Overall dimensions Body diameter oval 60mm 39mm 149mm x 60mm x 39mm 150 152 213mm x 60mm x 39mm 154 Weight 150gr TH 150 152 170gr 154 ORDER DETAILS TH 150 Dynamic metal tester with integrated impact device D TH 152 Dynamic metal tester with integrated impact device C TH 154 Dynamic metal tester with integrated impact device DL STANDARD DELIVERY Instrument with integrated impact device type D 150 C TH 152 or DL TH 154 Hardness test block with HLD value TH 150 HIC value TH 152 or HLDL value TH 154 Cleaning brush Coupling paste Battery Lithium CR2AA Communication cable Small support ring INNOVATEST certificate Manual
5. 400 Rockwell B 50 99 OPTIONAL ACCESSORIES Rockwell C 20 70 POROOO4 No 4 kg mm 35 140 e Adjuster bush Brinell 100 400 Spare plastic box Rockwell B 50 99 Spare diamond indentor Rockwell C 20 70 e Precision bench stand 5 No 5 Vickers Pyramid 40 300 Brinell 40 300 POROOO06 No 6 Brinell 40 300 Vickers Pyramid 40 300 POROO07 No 7 Brinell 100 600 008 No 8 Vickers Pyramid 20 106 50001 Precision bench stand ORDER DETAILS INSTRUMATIC Fully mechanical instrument with various scales available 50001 Precision bench stand optional PORTABLE HARDNESS TESTER RANGEMASTER RANGEMASTER DIGITAL PUSH TYPE PORTABLE HARDNESS TESTER FEATURES Digital version of the world famous INSTRUMATIC push type hardness tester The Rangemaster plus has an advanced electronic read out system to make reading correct hardness values an easy task Dynamic test indicator Large digital readout Hardness values in all major international scales with simple conversion facilities from one to the other RS 232 output for connection to PC or serial printer Memory storage capacity for in excess of 400 readings Statistical summary Integral icon facility provides operator with easy visual identification of mode in which unit is operating Operates in temperatures from 5 C to 35 C Upper and lower control limits Last reading recall TECHNICAL SPECIFICATIONS Model Hardness Scale Rockwell Tensile Stren
6. Carrying case OPTIONAL ACCESSORIES UKAS Reference hardness testblocks Support rings for convex concave and spherical surfaces only 150 152 see page 93 Printer 230 SUPPORT RINGS E e Swine e ww HARDNESS TEST BLOCK TA 230 PRINTER PORTABLE HARDNESS TESTER IMPACT TH 170 SERIES K 1 awama I D O 170 172 174 IMPACT DEVICE D IMPACT DEVICE C IMPACT DEVICE DL FEATURES The world famous series part of the unbeatable series of TIME dynamic Leeb hardness testers offer very affordable but accurate hardness testing solution for on site testing in workshops and in field operation The units assure accurate and reliable measurement All results and statistics can be directly printed to the optional compact fast thermal printer Any metallic products with a minimum solid mass starting from O 5kg can be tested according to the Leeb principle The display shows hardness values in all common scales such as HRC HRB HV HB HS and HLD The instrument is equipped with replaceable batteries providing 16 hours continuous operation Dynamic rapid hardness test procedure TH 170 Impact device D integrated TH 172 Impact device C applying low impact energy for surface hardened components and thin walled components TH 174 Impact device DL for testing in confined spaces Wide measuring range Direct display of hardness R
7. HV HS Hardness scale Memory 2500 groups data in main unit 500 groups transferred data from slave units Limit setting 170 960 HLD Charging time 6h main unit 2 5h slave unit Power 12V AA main unit 6V A400mA slave unit Continuous working time 12h main unit 50h slave unit Relative humidity 90 Environment temperature O C to 40 C Dimensions 260mm x 170mm x 57mm main unit 145mm x 35mm x 30mm slave unit Weight 1070gr main unit 120gr slave unit ORDER DETAILS TH 180 D Dynamic wireless hardness testing station with external D probe STANDARD DELIVERY Main unit D remote unit D impact device Type Z14 5 30 for testing cylindrical outside surface R14 5 R30 Type HZ12 5 17 for testing cylindri cal inside surface R12 5 R17 Type K14 5 30 for testing spherical outside surface SR14 5 SR30 Type UN for testing cylindrical outside surface radius adjustable R10 oo Cleaning brush Hardness test block HLD Coupling paste Charger for main unit Charger for D unit INNOVATESTS certificate Manual Carrying case OPTIONAL ACCESSORIES Support rings for convex concave and spherical surfaces see page 93 Impact device C DC D 15 DL Reference hardness blocks DL and or C remote unit IMPACT DEVICES WW ZH j Re p PORTABLE HARDNESS TESTER INSTRUMATIC INSTRUMATIC ANALOGUE PUSH TYPE PORTABLE HARDNESS TESTER FEATURES
8. Penetration depth 0 03mm average Probe operating life 200000 measurement Measuring force 14 7 N Power supply AC mains V Hz100 240 50 60 Batteries 1 2V Apcs Consumed power 3 0VA Battery life Without backlight 16 hours With backlight 8 hours Battery charging time 8 hours Transportation amp 35 C 60 C storage temperature Operating environment Relative humidity 3076 8076 Overall dimensions Gauge 180mm x 80mm x 42 4mm Probe 160mm x 25mm x e7mm ORDER DETAILS MET UTA Ultrasonic portable hardness tester ULTRASONIC PORTABLE HARDNESS TESTER ULTRAMATIC 2 HV400 ULTRAMATIC 2 3 INNIOVATEST t 591 gt HV3 M 9 Standard Stahl 6397 1515 1304 1591 ULTRAMATIC 2 ULTRASONIC HARDNESS TESTER FEATURES The ULTRAMATIC 2 is the next generation portable and laboratory use ultrasonic hardness tester The instrument covers several new advanced features that can be selected from a menu operated full color display Ultrasonic Contact Impedance test principle fast accurate easy to use in confined spaces Full color display with easy to operate user interface Suitable for hardness tests on metals and ceramics Direct reading in Vickers HV and direct conversion to HRC HRB HB amp UTS High reproducibility tolerance within 1 Extensive range of application at locations difficult to access Large memory statistics and multiple data outputs Windows software for data transm
9. hardness values in all common hardness scales The instrument is equipped with re chargeable batteries providing over 16 hours continuous operation Test results appear directly on the large display According to ASTM and DIN standards Display scales HRC HRB HV HB HS and conversion to tensile strength Highly accurate readings 6HLD Correction for impact direction 360 degrees Chargeable battery pack to ensure many hours of undisturbed testing and printing Direct keys for easy set up of testing parameters Mini printer installed on the main unit Ridged ABS anti shock casing with sealed keypad PORTABLE HARDNESS TESTING STANDARD DELIVERY Instrument with impact device type D Printer on top Hardness test block with HLD value Charger Cleaning brush Coupling paste Support ring small INNOVATEST certificate Manual Carrying case OPTIONAL ACCESSORIES e Special impact devices see overview on page 102 103 e UKAS Reference hardness blocks TECHNICAL SPECIFICATIONS e Support rings for convex concave and spherical surfaces Hardness parameter HL HRB HRC HV HB HS see page 93 Tensile strength U T S cb from 374 to 2652 range steel only Accuracy Within 6HLD Printer Printer showing all test results and settings Statistics Average value Impact device D standard Optional impact devices DC D415 DL G C Max hardness value 9AOHV 1 OOOHV Workpiece radius Rmin 50mm with support ring
10. 088 Steel amp cast steel Cold work tool steel Stainless steel Gray cast iron Nodular cast iron Cast alumumium Brass Bronze Copper Wrought steel 360 650 200690 000000001 400660 13138 200570 23 8346 268164 200550 13 5953 40173 300700 7 60200 45315 143650 STANDARD DELIVERY Instrument with integrated impact device type D Hardness test block with HLD value Coupling paste Support ring small Charger Cleaning brush INNOVATESTS certificate Manual Carrying case OPTIONAL ACCESSORIES UKAS Reference hardness blocks Type Z10 15 for testing cylindrical outside surface R10 R15 Type Z14 5 30 for testing cylindrical outside surface R14 5 R30 Type Z25 50 for testing cylindrical outside surface R25 R50 Type HZ1 1 13 for testing cylindrical inside surface R11 R13 Type HZ12 5 17 for testing cylindri cal inside surface R12 5 R17 Type HZ16 5 30 for testing cylindri cal inside surface R16 5 R30 Type K10 15 for testing spherical outside surface SR10 SR15 Type K14 5 30 for testing spherical outside surface SR14 5 SR30 Type HK1 1 13 for testing spherical inside surface SR11 SR13 Type HK12 5 17 for testing spherical inside surface SR12 5 SR17 Type HK16 5 30 for testing spherical inside surface SR16 5 SR30 Type UN for testing cylindrical outside surface radius adjustable R10 oo H HV HS PORTABLE HARDN
11. 172 210mm x 24mm x 55mm TH 174 Weight 180gr TH 170 172 or 200gr 174 ORDER DETAILS TH 170 Dynamic hardness tester with integrated impact device D TH 172 Dynamic hardness tester with integrated impact device C TH 174 Dynamic hardness tester with integrated impact device DL STANDARD DELIVERY Instrument with integrated impact device type D C or DL Hardness test block with HLD HLC or HLDLvalue AAA Batteries 2pcs Cleaning brush Coupling paste Support ring small USB communication cable USB driver cd INNOVATEST certificate Manual Carrying case OPTIONAL ACCESSORIES UKAS Reference hardness blocks Support rings for convex concave and spherical surfaces only TH 170 172 see page 93 SUPPORT RINGS lt 6 Q e wg HARDNESS TEST BLOCK 5 J gt a 4 APA up g ROCKY TH 110 ROCKY TH 110 PORTABLE HARDNESS TESTER WITH BUILT IN PRINTER FEATURES The year 1989 the first TIME Leeb portable hardness tester ROCKY HLN11A was presented to the market Yet the new generation of this high quality popular hardness tester is still the best selling Leeb tester world wide Often copied but never equalled the TH 110 is the 3rd generation of the ROCKY dynamic Leeb hardness testers standardized according to ASTM 956 Most metallic products with a minimum solid mass starting from O 5kg can be tested according to the Leeb principle The display shows
12. B Workpiece thickness Max 8mm Workpiece inner diameter Min 6mm PORTABLE BRINELL HARDNESS TESTER SET HB1500 Q O W WW K ee HB1500 RIGID PORTABLE BRINELL HARDNESS TESTER SET FEATURES Solid fine finished C frame Easy to operate also under difficult and harsh conditions Tolerance of test force 0 576 Test force is controlled by a shear pin Two types of application C clamp and hammer impact Suitable for assemblies inconvenient to be taken to the lab and not allowed to be cut Accuracy is much higher than any other type hammer impact tester Used to test the hardness of forgings castings steels nonferrous metal and its alloy products and to test the hardness of annealed normalizing and tempered mechanical parts GENERAL INFORMATION STANDARD DELIVERY The HB1500 Portable hardness tester is designed for the Brinell hardness Instrument test method The test force is controlled by calibrated shear pins Steel ball indentor After reading the diameter of the indentation with the analogue Flat anvil microscope the Brinell hardness number can be obtained from the lookup V anvil table Simple and easy to use The HB1500 has two types of application C clamp or hammer impact It is possible to test small to very large specimens The unit in particular is suitable for assemblies that are inconvenient to be taken to the lab or which cannot be cut in smaller parts The test can be completed in
13. ESS TESTER IMPACT TH 150 SERIES TH 150 TH 152 IMPACT DEVICE D IMPACT DEVICE C IMPACT DEVICE DL FEATURES The TH 150 series part of the unbeatable range of TIME Leeb type dynamic hardness testers offer a trendy design and affordable but accurate hardness testing solution for on site testing in workshops and in field operation The unit assures accurate and reliable hardness measurement standardized according to ASTM A956 Most metallic products with a minimum solid mass of 2kg can be tested according to the Leeb principle The display shows hardness values in all common scales such as HRC HRB HV HB HS and HLD The instrument is equipped with replaceable batteries that provide as much as 300 hours of continuous operation Leeb principle portable rebound hardness tester Hardness values in Rockwell HRB HRC Vickers HV Brinell HB Shore HS Leeb HLD Test results appear directly on the display Impact Device D integrated no cables Tests at any angle even upside down Bright LCD display Battery capacity on display Rechargeable Li on battery Simple handling and low test expenditure TECHNICAL SPECIFICATIONS Hardness parameter HRC HRB HV HB HS HL Impact Device integrated D TH 150 C TH 152 DL TH 154 Accuracy Within 6HLD 150 Within 12 TH 152 Within 12HLDL TH 154 Memory 256 average readings Output RS 232 Min Surface roughness 1 6um Ra TH 150 154 of workpiece or 0 4 Ra TH
14. NiMH battery 4 8V 2700 mAh Batterie life Approx 7 hours Battery charging time Approx 3 hours Operating temperature 0 C to 50 C Dimensions Device 78mm x 198mm x 160mm HxWxD Probe 219 5 x 175mm length Weight 1 400gr including probe 190gr Printer output ORDER DETAILS 400 Hardness tester HVAOO for portable accurate testing on metals and ceramics STANDARD DELIVERY Instrument Cable Power supply 100 240V 50 60Hz Carrying case Manual INNOVATEST certificate OPTIONAL PROBES 20N 49 98N force OPTIONAL ACCESSORIES High precision stand for probe Probe shoes for flat surfaces Probe shoes for convex surfaces 10mm 50mm Probe shoes for convex surfaces 50mm 250mm Probe SL type slim nose Windows software program for data transmission to PC incl USB cable Plastic handle for probe Carrying bag for main unit amp accessories Mobile printer
15. O 5kg 5kg Coupled on plate 0 05kg 0 05kg 0 02kg O 5kg Min thickness of sample Coupled 5mm 5mm Imm 10mm e Min thickness of hardened layers 0 8mm 0 8mm 0 2mm 1 2mm INDENTATION OF TEST TIP Impact devices D DC DL D 15 C G With 300 HV Diameter 0 54 O 5Amm O 38mm 1 03mm Depth 24 24 12 53pm With 600 HV Diameter 0 54 O 5Amm O 32mm O 90mm Depth 17pm 17pm 8pm 41 With 800 Diameter O 35mm 0 35 0 35mm e Depth Zum HARDNESS TESTING SYSTEMS DYNAMIC TH 180 DYNAMIC TH 180 WIRELESS PORTABLE HARDNESS TESTING STATION The TH 180 is a versatile portable hardness testing instrument combining dynamic Leeb rebound testing technology with wireless data processing Part of the family of the world famous TIME TH series portable testing instruments the TH 180 is the top of the range and allows the user to move freely around the workpiece without being limited or hindered by cables In the TH 180 today s wireless technology has been combined with over 20 years of know how in the portable hardness testing field According to DIN Standard 50156 and ASTM A 956 Hand held device with a rugged shock resistant housing Large and clear display with adjustable contrast and backlight Converts directly to HV HB HRC HRB HRA HS Highly accurate 4 HL 0 5 at 800 HI with automatic correction for impact direction Wide measurement range Simple operating menu stru
16. RTABLE BRINELL HARDNESS TESTER HB120 HB120 PORTABLE BRINELL HARDNESS TESTER FEATURES e Permanence Impression can be checked and rechecked anytime e Accuracy Calibrated to 0 5 of 1 of load Can be used for higher loads up to 3000kg Breaks through surface heat treatment to get to the core of the material e Versatility be used in virtually any position right side up upside down or sideways e Durability Some portable Brinell testers have been working over 60 years Standard test head Calibrated accurate to 1 2 of 1 load Releases at 3000kg automatically Capable of incremental loads Standard test head with long ram Same features as standard test head plus a long ram that puts impression head at end of 2 extension for easy access into recessed areas or over raised edges Low pressure test head Applied load and indicator dial are coordinated for softer metals Can be calibrated to release at loads of 62 1 2kg 125kg 250kg 500kg or 1000kg Low pressure test head with long ram Same features as low pressure test head plus a long ram that puts impression head at end of 2 extension for easy access into recessed areas or over raised edges Adapter to hold test head upright without base For testing large flats it enables test heads to be used under large drill presses boring mills arbor presses and beams that are capable of withstanding 3000kg load 2 5mm and 5mm ball adapter Used on softer materials or where a sm
17. aller impression is desired Chain adapter Used for large cylinders it fits onto a standard test head and wraps around specimens that are too big for regular tester High strength chrome molybdenum steel arms hold the chain to the test head and allow it to stay rigid while the chain takes the full thrust of the load Supplied with 4 chain Base 14 base with 14 test height opening and 4 throat is standard Optional 6 throat with either 14 or 20 test height opening available 20 base also available with 4 throat and 20 test height opening Stage micrometer Used to check calibration of Brinell Microscope by placing the microscope on the stage micrometer and aligning the grid on the stage micrometer with the grid on the microscope If the grids doesn t match perfectly the microscope is out of calibration and should be re calibrated Meets ASTM 50 and is traceable to NIST standards Brinell microscope Constructed from stainless steel the rugged and optically reliable Brinell microscope is the most versatile on the market today Featuring a 20x pre focused lens the microscope has a narrow nosepiece which easily fits into tight recesses resulting in less grinding on castings billets and dies For added stability when performing flat work a slip on base adapter is included A side opening in the microscope allows plenty of natural light for viewing and a cordless movable pen light can be used in dim conditions Calibrated on equipment t
18. any direction The test head itself can be used as a hammer impact tester where the shear pin will limit the applied force Therefore its accuracy is much higher than any other type hammer impact tester Brinell hardness testing with a testing force of 1580kg indentor diameter of 7 26mm then F D2 30 The test applied by the hydraulic HB1500 is equivalent to the standard Brinell hardness test with 3000kgf and a 10mm ball indentor The tester can be widely used to test the hardness of forgings castings steel samples nonferrous and alloyed metals TECHNICAL SPECIFICATIONS Test force 1580kg 0 576 Tolerance of test force Accuracy In accordance with ISO 6506 7 2 steel spherical surface indentor range 100 400 4 carbide spherical surface indentor Indentor Brinell standard hardness test block Holding handle Pin removal tool Pack of shear pins 250 pieces Impact cylinder Reading microscope 20x Rubber protective caps Carrying case OPTIONAL ACCESSORIES Carbide ball indentor Brinell reference hardness blocks Shear pins a pack of 250pcs Hemispherical spot anvil used for testing tubing or curled specimens Small flat anvil used for testing small specimens 40x reading microscope 3 lb hammer Optional range 400 65 Opening size 150mm x 100mm HxD Net weight C clamp 4 2kg Hammer impact 0 8kg ORDER DETAILS Portable Brinell Hardness tester set HB1500 PO
19. cture and extensive on screen help files Internal storage up to 2500 batches of data Wireless Impact device D stores over 500 groups of data Wired Impact device D included in standard delivery Down upload data from to PC via USB Ethernet or RS 232 The main unit works with different kind of wireless slave units such as impact device Dw Cw and DLw The data of the slave unit is transferred to the main unit via bi directional wireless communication FEATURES Main unit Large full color touch screen operation 320 x 240 matrix backlit display Memory for up to 2500 data groups Upper or lower limits hardness settings both visual and acoustic warning in case of exceeded test values Fast amp silent thermal printer prints all test data of the main unit and slave unit Six wired impact devices are available for special applications no need for calibration when impact device is replaced Automatic identification of impact device and test direction Stand alone working mode and wireless system working mode Slave unit Automatic transfer of impact device ID and test direction Matrix LCD display Wireless technology for communication with main unit Can be used as stand alone instrument See details of TH 1100 Stores readings and displays average test value Rechargeable Li on battery TECHNICAL SPECIFICATIONS Measuring range 170 960 HLD Highly accurate 4 HL 0 5 at 800 Testing direction 360 HL HRB HRA HB HRC
20. e is not required as 350kg magnetic base will hold the unit firmly in position The testing accuracy complies to 1506508 or ASTM E18 and is comparable to a Rockwell bench hardness tester Testing can be done regardless of the shape of the component as long as there is a flat surface for positioning of the magnetic base Able to test large size workpieces which are assembled unable to cut or inconvenient to move such as the large size moulds steel plate steel tube steel structure boiler pressure vessel metallic pipe lines or the slide ways of machine tools TECHNICAL SPECIFICATIONS Initial test force 10kg Rockwell test force 60kg 100kg or 150kg Indentor Force applying method By screw Maximum magnetic force gt 350kg Test range Rockwell hardness HRC HRB HRA etc 15 scales Resolution Rockwell hardness O 5HR Accuracy In accordance with 1506508 Minimum specimen size 60mm x 180 mm Net weight 4 9kg Package gross weight 7 Akg ORDER DETAILS 120 diamond cone 1 588mm carbide ball INMR O1 Rockwell hardness tester STANDARD DELIVERY Instrument with magnetic base Rockwell diamond indentor Rockwell ball indentor Adjuster key Packed in solid alu case INNOVATEST certificate Manual OPTIONAL ACCESSORIES Rockwell indentors Rockwell balls WEBSTER PORTABLE HARDNESS TESTERS WH100 WEBSTER WH100 MECHANICAL SHEET amp STRIP METAL HARDNESS TESTER FEATURES The INNOVATEST WH Se
21. ength ob U T S For all metallic materials Impact device provides testing at any angle even upside down Integral thermal printer High accuracy 6HLD and conforms to ASTM A 956 Six impact devices are available for special applications see following pages TECHNICAL SPECIFICATIONS STANDARD DELIVERY Hardness parameter HL HRC HRB HV HB HS e Instrument with impact device type D Tensile strength U T S cb from 374 to 2652 e Printer on top range steel only Hardness test block with HLD value Accuracy Within 6HLD e Charger Functions Auto recognition of connected impact device e Cleaning brush and probe test direction auto conversion to e Coupling paste other hardness scales e Support ring small Memory 1000 test maximum e RS 232 communication cable Data output RS 232 to Hyperterminal MS NNOVATESTS certificate Printer Thermal printer showing all test results Manual settings and histogram Carrying case Statistics Average value min max upper lower limits Impact device D standard Optional impact devices _DC D 15 DL G C see next page Max hardness value 9AOHV 1 OOOHV OPTIONAL ACCESSORIES Workpiece radius Rmin 50mm with support ring Rmin 1Omm e Special impact devices Min Workpiece weight 2 5kg on stable support see overview on page 102 103 0 05 2kg with compact coupling e UKAS Reference hardness blocks except C and G impact device Support rings for convex concave Wo
22. gth Shore Scleroscope Testing Range Shore Scleroscope 24 97 Resolution 1 Vickers Pyramid Brinell Tensile Strength Shore Scleroscope 0 1 Rockwell B Rockwell C Power 9V battery or adaptor Output RS 232 serial output Rangemaster Vickers Pyramid No Brinell Rockwell B Vickers Pyramid No 35 1000 Brinell 100 500 Rockwell B 30 100 Rockwell C 20 70 Tensile Strength 255 1999 N mm TECHNICAL SPECIFICATIONS Model Scale Power Output ORDER DETAILS RANOOOT1 ROCOO01 0002 50001 C ROCOOO 2 HRC 20 70 ROCOOO HRB 30 100 0002 9V battery or adaptor RS 232 serial output Rangemaster Rockmaster C Rockmaster B Precision bench stand optional STANDARD DELIVERY Instrument UKAS Reference hardness blocks Carrying case Adjuster key INNOVATEST certificate Manual OPTIONAL ACCESSORIES Precision bench stand Communication cable Software REFERENCE HARDNESS BLOCK PORTABLE HARDNESS TESTER BARCOL 01 BARCOL INBC 01 IMPRESSOR FEATURES Portable indentation hardness tester Used to test the hardness of all kinds of aluminum from very soft aluminum to very hard aluminum alloys Single hand operation no real operating experience required can test any flat surface Wide testing range equivalent to Brinell hardness 25 1 5OHBW Extended application Model INBC O1 is applied to test the hardness of aluminum alu
23. ission TECHNICAL SPECIFICATIONS Measuring principle According to the UCI method Ultrasonic Contact Impedance Principle Standards Conforms to DIN 50159 ASTM A 1038 05 and VDI VDE directive 2616 Indentor Vickers diamond angle 136 Test load 10 20 30N 49 98N different probes Vickers HV Rockwell HRC Rockwell HRB 10 3000 direct 20 68 conversion 41 99 5 conversion Measuring range Brinell HB 76 447 conversion UTS N mm 255 2180 conversion Reproducibility Vickers HV 1 Rockwell HRC 30 5 Rockwell HRB 1 2 Brinell HB 1 Preferably metals for which HV400 can be calibrated Examinations of ceramic s and glass are possible if comparative measurements are accomplished for calibration Applicable testing materials Display Large full color graphical display 3 5 Color LCD 320 x 240 Pixel Calibration Storage of min 100 calibrations for different materials Display languages English or German selectable Memory 500 000 readings storage in batches with date hour and Go No Go judgement Statistics Mean value minimum maximum standard deviation absolute and relative Delete single readings Interface Serial RS 232C USB Host device USB Slave for PC connection 1 pc USB Master for printers 2 pcs or USB flash drives 1OOBase TX Ethernet RS 232 Prints hardness values hour and date Prints statistics of stored data Power supply 100 240 50 60Hz Batteries
24. minum alloys copper copper alloys fiber reinforced plastics and rigid plastics etc High sensitivity Featured with 100 segments scale much more sensitive than Webster hardness testers applied in aluminum alloys industry No need to move or support the workpiece Used to test super large and thick workpieces and assembly parts Complies to ASTM 648 2000 Easy conversion The test results can be converted to HB HR HV and HW through a conversion table supplied with the instrument CHNICAL SPECIFICATIONS Indentor 26 panhead cone Head face diameter O0 176mm Testing range O 100HBa equivalent to 25 150HBW Resolution 0 5 Indication error Hardness range 42 52HBa 2HBa Hardness range 84 88HBa x 1HBa Repeatability error Hardness range 42 52HBa 2HBa Hardness range 84 88HBa x 1HBa Weight O 5kg ORDER DETAILS 01 Barcol impressor Instrument Spare indentors 2 pcs High value Standard hardness plate Low value Standard hardness plate Calibration wrench Supporting foot Carrying case OPTIONAL ACCESSORIES e Spare indentors Hardness test plates INNOVATEST MAGNETIC ROCKWELL 01 MAGNETIC ROCKWELL 01 PORTABLE ROCKWELL HARDNESS TESTER FEATURES Magnetic base hardness tester designed according to the principle of Rockwell hardness testing The test head can be fixed to the surface of iron and steel components by magnetic force Support to the test piec
25. nd technology or the UCI ultrasonic hardness test While the rebound technology conforms to the ASTM and DIN standards UCI offers the advantage of being more suitable for light weighted and thin components Barcol and Webster are based on impressing the material with a sharp indentor portable Rockwell or portable Brinell are more or less spin offs from the applicable standard methods of such scales Being certain ALL PORTABLE TESTING INSTRUMENTS ARE COVERED BY A 3 YEARS FREE CALIBRATION SERVICE Simple procedure return your instrument to INNOVATEST Europe BV and receive it back in 5 working days with a new 12 months UKAS traceable calibration certificate No doubts BE CERTAIN about your measurements TH 170 WEBSTER PORTABLE HARDNESS TESTERS Page 96 Page 96 Page 96 TH 172 Page 94 Page 94 Page 94 TH 150 TH 152 Page 98 Page 100 TH 110 Page 92 Page 104 m GO OOOO TH 180 PORTABLE HARDNESS TESTERS Page 120 MET U1A HV400 Page 106 Page 108 Page 110 INSTRUMATIC RANGEMASTER BARCOL Page 114 Page 112 WEBSTER Page 116 Page 118 HB1500 HB120 PORTABLE HARDNESS TESTER IMPACT TH 1100 IMPACT TH 1100 PORTABLE LEEB HARDNESS TESTER FEATURES The IMPACT TH 1100 is a small integrated digital hardness tester which operates according to the dynamic rebound method standardized according to ASTM A956 The compac
26. ockwell HRB HRC Vickers HV Brinell HB Shore HS Leeb HL For most metallic materials Automatic gravity compensation for testing at any angle Simple handling and low test expenditure High accuracy 0 5 Clear LCD display showing all functions and parameters Conforms to ASTM A 956 and DIN 50156 TECHNICAL SPECIFICATIONS Hardness parameter HRC HRB HV HB HS HL Accuracy Within 6HLD 1 70 Within x12 HLC TH 172 Within x 12HLDL TH 174 Statistics Average max 270 in 9 groups Output USB Min Surface roughness 1 um Ra TH 170 174 of workpiece 4 Ra 172 Impact device integrated TH 170 C TH 172 DL TH 174 Needle front section of Diameter 2 4 2mm DL device 174 Length 50mm Max hardness value 940HV TH 170 1000HV TH 172 950HV 174 Workpiece radius Rmin 50mm with support ring Rmin 1Omm Workpiece minimum weight 2kg 5kg on solid support 170 174 0 05kg 2kg with coupling paste 0 5 1 5kg on solid support TH 172 0 02 0 5kg with coupling paste Workpiece min 5mm 170 174 thickness coupled Imm TH 172 Workpiece min 0 8 TH 170 174 case hardened depth 0 2mm 719 172 Indentation depth See page Impact devices data Continuous working time 150 h without backlight Power Batteries AAA 2 pcs Operating temperature O C to 40 C Overall dimensions 155mm x 24mm x 55mm TH 170
27. raceable to NIST standards the Brinell microscope meets ASTM 5 10 specifications It is ready to use and comes equipped with a handy storage case ORDER DETAILS HB120 Portable hydraulic system featuring Brinell indentations up to 3000kgf PORTABLE ULTRASONIC HARDNESS TESTER MET U1A MET U1A 1 INNOVA MET U1A ULTRASONIC HARDNESS TESTER 15N TESTFORCE FEATURES The INNOVATEST MET U1A differs completely from traditional hardness testers Instead of measuring the size of the indentation of the test sample using a microscope it uses a diamond indentor mounted on a vibrating rod that presses on the test surface at a fixed load and then measures its hardness by applying ultrasonic vibrations and analyzing its damping effect The technique is very reproducible which makes the a perfect tool for on site measurements such as maintenance of large scale structures vehicles ships steel towers bridges air planes It is ideal for inspection of thin materials or difficult to get area such as crank shaft gears and grooved areas Hardness measurements of metals and alloys on standardized hardness scales Rockwell HRC Brinell HB Vickers HV and Shore HSD Three additional scales H1 H2 H3 for calibration of selfdefined hardness scales materials Rm scale for determination of tensile strength Typically suitable for components that are inaccessible for dynamic hardne
28. re Extremely short impact device Spring loaded with a special loading stick Otherwise as for type D Application Use in very confined spaces e g in holes cylinders or for internal measurements on assembled machines IMPACT DEVICE D 15 Special feature Particularly slim front section and with measuring coil moved back Application Hardness measurements in grooves and on recessed surfaces mo IMPACT DEVICE DL Special feature Needle front section 24 2 length 50mm Application Measurements in extremely confined spaces D 15 DL G BH WE V IMPACT DEVICES FOR SPECIAL APPLICATIONS TH 110 160 SERIES TECHNICAL SPECIFICATIONS Impact devices D DC DL D 15 C G Impact energy 11 Nmm 11 Nmm 3 Nmm 90 Nmm Mass of impact body 5 5gr 7 8 3 0gr 20gr DL 7 2 Test tip Hardness 1600HV 1600HV 1600HV 1600HV e Diameter 3mm 3mm 3mm 5mm e Material Tungsten carbide Tungsten carbide Tungsten carbide Tungsten carbide Impact body e Diameter 20mm 20mm 20mm 30mm e Length 147 86mm 162mm 141mm 254mm Weight 75 50gr 80gr 759 250gr Max hardness of sample 940HV 940HV 1000HV 650HB Preparation of surface Roughness class ISO NZ NZ N5 9 Max roughness depth Rt 10pm 10pm 2 5ym Average roughness Ra 2ym 2ym 0 4 Zum Min weight of sample e Of compact shape 5kg 5kg 1 5kg 15kg On solid support 2kg 2kg
29. ries hand operated Webster Hardness Testers are portable instruments which can perform on site hardness testing on aluminum alloys brass copper and soft steel A quick and easy test the hardness value can be read out directly on the indicator with a simple clamp The measuring procedure complies to the American Standard ASTM B647 Suitable for testing aluminum alloy profiles tubings and sheet materials Especially suitable for a fast non destructive quality inspection on the production site The WH Series hand operated Webster Hardness Testers feature a fast and comprehensive testing method for testing thin soft materials There are several models available for different applications and with different measuring capacity The Webster hardness values can be converted into the commonly used Vickers Rockwell and Brinell hardness values Each tester is packed in a strong industrial box including all standard delivery such as a set of tools a hardness standard and a spare indentor One hand operation and portability Variety of anvils permits testing a great variance of shapes Simple operation permits readings independent of the operator s skill Test is made by simply applying pressure to the handles until bottom is felt Easy to read dial indicator with 20 graduations permits use of the tester as Go and No Go gauge Standard hardness gauge tests materials up to 13mm in thickness TECHNICAL SPECIFICATIONS STANDARD DELIVERY Measuring
30. rkpiece min thickness 5mm except with impact device and spherical surfaces coupled 10mm C 1mm see page 93 Workpiece min case 0 8mm except C impact device 0 2mm hardened depth and G impact device 1 2mm Indentation depth See following page Impact devices data Power Rechargeable Li battery 6V 1 pc Charger charging time 500mA 1 8 2 5 4 hours Operating temperature O C to 40 C Overall dimensions 230mm x 90mm x 47mm Weight 4209 including impact device and printer SUPPORT RINGS ww e ORDER DETAILS HARDNESS TEST BLOCK TH 160 D Portable hardness tester with builton printer external D probe statistics and RS 232 output IMPACT DEVICES FOR SPECIAL APPLICATIONS TH 110 160 SERIES IMPACT DEVICE G Special feature Enlarged test tip increased impact energy approximately 9 times that of type D Low demands on measuring surface finish For measurements in the Brinell range only max 650 Application IMPACT IMPACT Solid components e g heavy castings and forgings BODY D BODY G IMPACT DEVICE D Special feature Universal standard unit e Application For the majority of hardness testing assignments IMPACT DEVICE C Special feature Reduced impact energy approximately 1 4 of type D Application Surface hardened components coatings thin walled or impact sensitive components small measuring indentation IMPACT DEVICE DC Special featu
31. scope 0 2 e Instrument Accuracy 0 5HW Standard hardness plate Net weight O 5kg e Spare indentor Package gross weight 1 55kg Calibration wrench Package dimensions 330mm x 255mm x 150mm e Small screwdriver Carrying case NNOVATESTS certificate e Installation amp user manual OPTIONAL ACCESSORIES e Standard hardness plates MODEL SELECTION amp ORDER DETAILS WH100 Material Aluminum alloy Hardness range 25 1 TOHRE 58 13 1HV Workpiece thickness Max 6mm Workpiece inner diameter Min 10mm WH110 Material Aluminum alloy Hardness range 25 1 10HRE 58 13 1HV Workpiece thickness Max 13mm Workpiece inner diameter Min 10mm WH120 Material Aluminum alloy Hardness range 25 1 TOHRE 58 13 1HV Workpiece thickness Max 8mm Workpiece inner diameter Min 6mm WH130 Material Brass in hard half hard state super hard aluminum alloy Hardness range 63 1 O5HRF Workpiece thickness Max 6mm Workpiece inner diameter Min 10mm WH140 Material Brass in hard half hard state super hard aluminum alloy Hardness range 63 1O5HRF Workpiece thickness Max 8mm Workpiece inner diameter Min 6mm WH150 Material Soft brass pure copper Hardness range 18 Workpiece thickness Max mm Workpiece inner diameter Min 10mm WH160 Material Soft brass pure copper Hardness range 18 Workpiece thickness Max 8mm Workpiece inner diameter Min 6mm WH170 Material Cold rolled steel sheet stainless steel Hardness range 48 1 0OHR
32. ss testers small articles structures with thin walls pipes reservoirs steel sheets etc Leaves no visible indent on the tested article surface crankshafts necks mirrored surface knives TECHNICAL SPECIFICATIONS STANDARD DELIVERY Measuring principle According to the UCI method Instrument ultrasonic contact impedance principle e UI ultrasonic probe Measuring range Rockwell C scale HRC 20 70 Power unit Brinell scale HB 5 650 Batteries AA 4pcs NiMh Vickers scale HV 75 1000 Carrying case Shore scale HSD 23 102 INNOVATEST certificate Tensile strength MPa 378 1736 e User and installation manual Reproducibility Rockwell C scale HRC 1 5 Brinell scale HB 10 Vickers scale HV 12 Shore scale HSD 2 OPTIONAL ACCESSORIES Tensile strength MPa 576 Measurement results Computation of average value from the data e Reference hardness blocks processing stored in the memory Support V anvil Selective data deleting for example in case Probe stand of doubt in the conducted measurements Display lighting Available Display features Hardness scale measured value number of measurement operation mode archival number battery charge indication Auto off after 150 sec Memory 100 readings also stored when test is switched off Surface roughness Ra 2 5 Convex concave gt 5mm Minimum specimen weight gt 0 01kg Material thickness Probe without position accessories gt 2mm Probe with position accessories 1mm
33. t design allows easy on site hardness testing on solid components that are difficult to transport or to be used on positions difficult to access by other hardness testers Quick and reproducible measurements can be made independent of impact direction Leeb principle portable rebound hardness tester Hardness values in Rockwell HRB HRC Vickers HV Brinell HB Shore HS Leeb HLD Test results appear directly on the display Impact Device D integrated no cables Tests at any angle even upside down Bright LCD display Battery capacity on display Rechargeable Li on battery Simple handling and low test expenditure TECHNICAL SPECIFICATIONS Standard impact device D integrated Hardness scales HRC HRB HV HB HS amp HLD Measuring range materials See table Accuracy 6HLD Output No Min surface roughness of workpiece 1 Max workpiece hardness 960HLD Min radius of workpiece 5 convex concave with support ring Rmin 10mm Min workpiece weight 2 5kg on stable support 0 05 2kg with compact coupling Min workpiece thickness coupled 5mm Min thickness of hardened layers 0 8mm Charging time 3 hours Continuous working time gt 8 hours Power Rechargeable Li battery Operating temperature 0 C to 40 C Overall dimensions 145mm x 35mm x 30mm Weight 110gr ORDER DETAILS TH 1100 Portable dynamic hardness tester MEASURING RANGE Material HLD HRB HRC B 32 5 99 5 300840 224718
Download Pdf Manuals
Related Search