Qnn Safe Australia Pty Ltd Product User Manual
Contents
1. Code then press press 7 press 5 Control by one of the Master Code or Supervisor Code with one normal user User Number 3 7 e To delete the Dual control mode Press then Master Code then press fo ea a am press press Go back to the Single control mode Page 4 of 5 ONN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www gnnsafe com au Email info qnnsafe com au Phone 02 87982669 Time delay function Time delay can be set from 60 seconds to 99 minutes Press will start the time delay period During the time delay period yellow light flash every 5 seconds and all keys are locked SET light flash at last 10 seconds and the period ended with two beeps There are 2 minutes operation period before entering into the next Time delay To activate Press then Master Code then press then press then press to confirm 01 99 minutes To de activate Press then Master Code then press then press 0 then press to confirm Cautions When the green light change to yellow it means that the batteries need to be replaced Please replace new batteries as soon as possible Page 5 of 52. Supervise Code again then press to confirm Orange light on with one beep means the Master Code has been change successful Page 3 of 5 ONN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www gnnsafe com au Email info qnnsafe com au Phone 02 87982669 Keep the door open check and remember the code Orange light off with two beeps means changing is fault And the old Supervise Code is still in place Changing User Code by user Please keep the door at opening position during the whole processing until fully ensure that the code 1s changed correctly For security reasons please change to your own code after the first opening Your code can be set up to 10 digits Open the safe door Press then enter User Code then press Orange light on with one beep then enter New User Code then press m Enter New User Code again then press to confirm Orange light on with one beep means the Master Code has been change successful Keep the door open check and remember the code Orange light off with two beeps means changing is fault And the old Code is still in place Other features Dual control mode safe needs to be opened under two digital codes There are two dual control mode Press then Master Code then press press press V Control by any 2 normal user User Number 3 7 Press then Master
3. User setting Under the control of the Master Code the maximum user of this safe can be set up to 6 The supervisor is able to setup and delete up to other 5 users User Number 2 for Supervisor User Number 3 7 for other 5 user To set New Supervisor Code by Master x To set up Press then Master Code then press enter New Supervisor Code then press enter New Supervisor Code again then press to confirm anen am am m To delete Press then Master Code then press 5 Y E E To set New User Code by Master Supervisor To set up Press then Master Code Supervisor Code then press then enter the be User Number Could be from 3 to 7 then press EJ enter New User Code then press enter New User Code again then press to confirm To delete Press then Master Code Supervisor Code then press then enter the oe ox a J User Number the press Changing Supervisor Code by supervisor Please keep the door at open position during the whole processing until fully ensure that the code is changed correctly For security reasons please change to your own code after the first opening Your code can be set up to 10 digits Open the safe door Press then enter Supervisor Code then press Orange light on with one beep m m Press press and then enter New Supervise Code then press Enter New
4. Please note The pause between the two code entering is 60 seconds Green light on with one beep indicated that the digital lock is unlock factory setting master code 123456 Turn master key clockwise and turn the handle clockwise safe now is unlocked All light off with 2 beeps means a wrong code try 3 continual wrong code tries will lead a freezing period of 5 minutes Closing instructions Close the door Turn the handle counterclockwise Turn master key counterclockwise and remove the key Changing Master Code Please keep the door at opening position during the whole processing until fully ensure that the code is changed correctly For security reasons please change to your own code after the first opening Your code can be set up to 10 digits Open the safe door Press then enter Master Code then press Orange light on with one beep ses ff Press press and then enter New Master Code then press Enter New Master Code again then press G to confirm Orange light on with one beep means the Master Code has been change successful Keep the door open check and remember the code Orange light off with two beeps means changing is fault And the old Master Code is still in place Page 2 of 5 ONN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www gnnsafe com au Email info qnnsafe com au Phone 02 87982669
5. QNN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www qnnsafe com au Email info qnnsafe com au Phone 02 87982669 QNN Safe USER S MANUAL FOR B BW SERIES SAFE Serial Number This package contents User manual 2 Master keys 4 Bolt Down Screws M12mm x 80mm 2 for BW model 4 AA Batteries 3 handle bars Please contact your retailer or Qnn Safe Australia P L if any shortage is occurred For the first time use it needs to supply 4 AA batteries power to the safe Counter clockwise the Keypad then to insert the supplied 4 AA batteries into the Battery Box Prepare the master key into the position After enter the right code turn master key clockwise and turn the handle clockwise Safe is now unlocked This safe is operated by the Master Key and the digital code The factory setting for the Master Code is 12345 6 Page l of 5 ONN SAFE AUSTRALIA PTY LTD ABN 47 168 078 233 Unit 9 376 Newbridge Road Moorebank NSW 2170 Web site www gnnsafe com au Email info qnnsafe com au Phone 02 87982669 Opening instructions Prepare the master key into the position CE Single Control Mode Press and then the code and then press Factory setting at Single Control Mode Master Code 123456 Dual Control Mode Press and then the first code and then press and then pa the second code and then press
Download Pdf Manuals
Related Search