89046 multilingual
Contents
1. User manual D x LO Cc K we move the world 4 x serial PCI Card Product No 89046 CE FC sc User manual No 89046 a a www delock de NL ATS Description The DeLock PCI card expands your PC by four external serial Ports You can connect devices like scanner modem mouse etc to the card Specification e 2 x DB9 serial port e 2 x Pin header with rear bracket with two DB9 e Compatible with 16C550 UART e FIFO 16 byte e Data transfer rate up to 1 Mbps e Plug amp Play e Automatically selects IRQ and I O e Supports PCI IQR sharing e 32 Bit PCI standard 2 1 e for Windows 98SE ME 2000 NT4 0 XP Linux DOS System requirements e PC with one free PCI Slot and one rear slot e Windows 98SE ME 2000 NT4 0 XP Linux DOS Package content e PCI card rear bracket e Driver CD e User manual Make sure that product package contains all items before operation If any item is missing or damaged then please contact your dealer immediately ASNA F Hardware Installation Note Follow the general instructions for installation of the card If necessary read the manual of your computer or ask a specialist for help 1 Turn off your PC and unplug the power cord 2 Open the housing 3 Remove the slot holder from the available PCI slot and the rear slot for the 2 serial ports 4 Before you can insert the Card into the PCI slot please connect the 2 ports of the serial rear2. for use Click Finish Support Delock If you have further questions please contact our customer support support delock de www delock de or phone 0700 DELOCKGE 0700 335 625 43 You can contact our service hotline during the following times Mon Fry 9 00 17 30 pm charge 0 12 min A connection fee applies according to fee schedule of Deutsche Telekom AG or your local telephone provider All callers outside of Germany dial please 00493081789324 You can find current product information on our homepage www delock de Final clause Information and data contained in this manual are subject to change without notice in advance Errors and misprints excepted Copyright No part of this user s manual may be reproduced or transmitted for any purpose regardless in which way or by which means electronically or mechanically without explicit written approval of Delock Edition 01 2006
3. bracket to the PCI card Follow this instructions Insert the card straight and carefully into the free PCI slot until it is well seated Use a screw to attach the card to the housing Fix the rear bracket with a screw also on the housing Reattach the housing and connect the power cord to the AC adapter oN 6 UI Driver Installation Windows XP Service Pack 2 Controller installation 1 After installing the hardware and starting your computer the hardware assistant will appear Choose the option No not this time and click Continue 2 Put the driver CD in the CD ROM drive choose Install software automatically and click Continue 3 Choose the driver nm9845s and click Continue 4 When driver is located click Continue installation 5 Click Finish uw SJ LZ AIN Install serial interface 1 The hardware assistant appears with a newly found serial interface Choose No not this time and click Continue 2 Choose Install software automatically and click Continue 3 Click Continue installation 4 Click Finish 5 When the other serial ports are found repeat steps 1 4 four times Your PCI card is installed and ready for use Windows XP Service Pack 1 Controller installation 1 After installing the hardware and starting your computer the hardware assistant will appear 2 Put the driver CD in the CD ROM drive
4. choose the driver nm9845s and click Continue 3 When driver is located click Continue installation 4 Click Finish Install serial interface 1 The hardware assistant appears with a newly found serial interface 2 Choose Install software automatically and click Continue 3 Click Continue installation 4 Click Finish 5 When the other serial ports are found repeat steps 2 4 four times Your PCI card is installed and ready for use Windows 2000 1 After installing the hardware and starting your computer the hardware assistant appears Put the driver CD in the CD ROM drive and click on next Choose Automatically search for driver and click Continue Select the CD drive option and click on next After the driver nm9845s is located click on Continue Click Finish Your PCI card is installed and ready for use No ul WN SNL ous Windows 98 98SE ME 1 After installing the hardware and starting your computer the hardware assistant appears 2 Put the driver CD in the CD ROM drive and click Continue 3 4 Choose the option CD ROM drive and choose the path CD ROM drive Choose the option Search for best driver and click Continue NetMos nm9845s Win98 click OK then Continue 5 Click Continue The driver is being installed 6 7 Your PCI card is installed and ready
Download Pdf Manuals
Related Search