MHTL-WS User Manual
Contents
1. INSTALLATION INSTRUCTION MHTL LWP 1 Main Data CREE System Power Factor Fixture Model LED Type Input Voltage Wattage Ballast Model 120V MHTL WS 48E XTE ee AG 48W EUC 052S140ST gt 0 95 50 60Hz 2 Installation and Maintenance Instructions 2 1 This product is to be installed and serviced by a certified electrician 2 2 The Luminaire should be installed in an area with good ventilation clear of any corrosive or combustible gases and explosive objects 2 3 A supply voltage tolerance of 10 is allowable An improper installation outside of this range or with the incorrect input voltage will influence the normal operation of this luminaire and result in damage to the lamp and electronic ballast 2 4 The luminaire must be properly grounded to prevent accidental electrical shocks and to prevent interference from the electrical ballast affecting the normal operation of the luminaire 3 Installation 1 Remove the Lens 2 Install the housing on the wall or ceiling using anchors and screws 3 Shut off main power and connect power source to ballast that is inside the fixture 4 Reinstall the lens and energize the fixture If mounting bracket 1s provided install mounting bracket on the wall or ceiling first then hook the fixture on the bracket Surface Mount without Mounting Bracket Surface Mount with Mounting Bracket Phone 718 524 4370 Fax 718 524 4390 www MHTLIGHTINGcom
Download Pdf Manuals
Related Search