Stenoboard User Manual
Contents
1. Fn1 Fn2 HR P LED intensity up Fn1 Fn2 HR F LED intensity down2. Stenoboard User Manual Installation You can use Stenoboard without installing any software besides Plover or equivalent as by default it emulates a NKRO USB keyboard However if you think that in the future you will need to use Gemini PR or TX Bolt protocol on that computer eg if you need to use professional captioning software or if you plan to do Stenoboard firmware upgrades from that computer it is advised to first install the arduino IDE To install the IDE download it from http arduino cc en main software install and then plug the keyboard in and wait for all the different drivers to be installed If you get an error during the driver installation usually that is not an issue To test installation you can try Gemini PR or TX Bolt protocols with Plover or equivalent see below Change communication protocol If either of those protocols works you can be confident that IDE installation was successful Function Keys Stenoboard has two functions keys at the left of the left consonants keyboard Starting from the top they are Fn1 and Fn2 Change communication protocol To change communication protocol you can use the following commands Fn1 PH PB NKRO Keyboard emulation mode default Fn1 PH G Gemini PR protocol mode Fn1 PH B TX Bolt protocol mode Change LED intensity turn off LED To change LEDs intensity or to turn LEDs off you can use the following commands
Download Pdf Manuals
Related Search