Ultrasonic Bath
Contents
1. Instruction a g g gt Manual Ads Solutions Ultrasonic Bath Principle Ultrasonic waves are the term used to describe waves having a frequency above the audible range of humans Whenever high intensity ultrasound is applied to a liquid the result is millions of tiny bubbles or cavilities in a liquid Cavitation is produced by the alternating high and low pressure waves generated by high frequency ultrasonic sound During the low pressure phase these bubbles grow from microscopic size and during the high pressure phase these bubbles are compressed and implode known as cavitation General Instructions Please check for any physical damage of Ultrasonic bath internally or externally when you unpack for the first time If you find any damage please inform the supplier and do not put the equipment in operation Change the cleaning solution periodically Whenever the cleaning solution is changed allow it for degassing before starting restarting cleaning Surface activity on liquid varies according to liquid level in the tank and also depends on the surface tension of the liquid Cleaning efficiency remains the same irrespective of visible surface activity seen at different levels of liquid Do not operate the ultrasonic bath without liquid level in the tank It may damage the transducer or heater permanently Do not overload the tank with objects to be cleaned It may be faster to clean several small load batches than on2. Phase supply with proper earthing Switch on the Mains Set the cleaning time by UP key Load the basket containing objects to be cleaned and place in the tank Ensure that all the objects are fully immersed Your ultrasonic bath is ready for operation Press the ON button of the Ultrasonic bath NOU RWNE Timer Settings amp Operation With Power ON Set the Timer by UP amp DOWN Key for the amount of time you wish the item to be cleaned Press the ON Key Green LED amp the Ultrasonic Cleaner will ON Timer will show down counting Ultrasonic Cleaner will stop after completion of the time cycle amp Timer display will show O00 amp the Red LED will be ON 3 To repeat the same cleaning cycle press the ON key once again This cleaning cycle time will remain in memory until you turn OFF the power to the cleaner To reset the time during the cycle or after cycle press the OFF key the Red LED will be ON then set the time by UP amp DOWN key amp press the ON Key Head Office Aneer Engineers Pvt L d 21B Duff Street Kolkata 700 006 West Bengal India DIN EN ISO 9001 2008 Organisation CM 91 33 23525024 E 91 33 23504946 aneer aneer net cad aneer net Visit us at www aneer net Instruction a das yi That Manual AS solutions Ultrasonic Bath Degassing Fresh solutions contain many dissolved gases usually air which reduce effective ultrasonic action Although solutions will naturally d
3. e big load at a time Also you may achieve better amp effective cleaning Put the Ultrasonic bath in SWITCHED OFF mode when it is not in use Caution Disconnect Unplug Mains before emptying filling the liquid Do not operate Ultrasonic Bath without Proper Earthing Maintain minimum liquid level of 3 4th of the tank Do not drop liquid inside the generator or inside the tank housing Allow atleast 10 minutes for degassing of liquid before starting cleaning operation Do not drop heavy objects in the tank directly Do not load object directly on the base of tank Do not dip your finger hand any body parts in the cleaning liquid while the ultrasonic bath is ON Do not use flammable liquids use only water based cleaning solutions Do not use Carbon Tetrachloride CCI as it decomposes with Ultrasonic Bath amp produces POISONOUS GAS Do not use acids Do not operate Ultrasonic bath continuously for more than 90 minutes For Longer operation an idle time of 10 minutes is recommended after every continuous cycle Temperature of liquid should not exceed 65 degree Celsius Keep empty space after the ventilation area window provided for the ultrasonic bath Do not enclose it in a box Heat generated during operation must be vented off otherwise it may damage parts permanently Do not immerse the Ultrasonic Bath in water Keep the control panel and area around the bath Clean and Dry Disconnect the Mains supply before openin
4. egas over time using degas mode speeds up the degassing process Solutions that have been kept in Bath in unused condition for 24 hours or more may reabsorb some gases Auto Degassing After power ON if necessary press DOWN Key for auto degassing Default degas time is 10 minutes After completing the degas time you are ready to use Standard Warranty Terms The Ultrasonic Baths have been manufactured under strict quality control norms and tested amp passed accordingly to industry standard The equipment is warranted for a period of one year from the date of invoice The electronic parts however will not be included in the standard warranty Aneer Engineers Pvt Ltd s sole responsibility is towards repair of the equipment free of charge within the warranty period if the equipment found defective in workmanship or material of construction The warranty condition does not apply in case of damage to the equipment or any other parts due to improper installation abuse or mishandling during operation Aneer Engineers Pvt Ltd however can not be held liable for consequential loss damage to property or person or any other inconvenience caused The customer shall not try to open or repair the equipment In case the equipment supplied by Aneer Engineers Pvt Ltd develops any defect or malfunctions the customer should inform and send the equipment at the supplier s workshop for its free repair This warranty is subjective to the Installation and
5. g any panel for maintenance Head Office Aneer Engineers Pvt Ltd a t Duff Street Kolkata 700 006 West Bengal India DIN EN ISO 9001 2008 Organisation 91 33 23525024 9 33 23504946 aneer aneer net cad aneer net Visit us at www aneer net Instruction Manual Ultrasonic Bath Specification Elctric Supply i 230 V 15 50 Hz 3 Hz Ultrasonic Frequency 33 KHz 3 KHz Ultrasonic Power Depends on Model See Chart Below Tank Capacity Depends on Model See Chart Below Tank Material 304 Stainless Steel Tank Size Depends on Model See Chart Below Transducer PZT Sandwich Type bonded on base of Stainless Steel Tank Ultrasonic Generator MOSFET base Technolofy Construction Ultrasonic Generator amp Stainless Steel Tank are housed in one tank Timer Two Digit Electronic Timer Heater Optional provided to rise the temperature of liquid upto 60 Degrees Centigrade Basket Provided Size depends on Model See Chart Below Standard Ranges of Ultrasonic Bath Tank Inner Size mm Basket Inner Size mm i Capacity Litres LxWxH LxWxH 228 X 140 X 100 200 X 100 X 20 300 X 150 X 100 250 X 100 X 60 300 X 150 X 150 270 X 100 X 100 300 X 228 X 150 270 X 190 X 100 Operating Instructions Fill the tank with liquid upto 3 4 th of the tank Add Cleaning agents to the required percentage Allow 10 Minutes to de gass the liquid before starting the cleaning operation Connect the 230 V AC Single
6. operation of the Ultrasonic Cleaner set being carried out as per instructions contained in the User Manual Warranty will be void if the equipment is found opened or serviced by unauthorised agencies persons not directly authorised by Aneer Engineers Pvt Ltd through a written agreement Ultrasonic Baths does not have any on site warranty The customer will have to send the equipment to our works and arrange to collect it back from our works at their own cost Head office Aneer Engineers Pvt L d 21B Duff Street Kolkata 700 006 West Bengal India DIN EN ISO 9001 2008 Organisation C4 91 33 23525024 E 91 33 23504946 aneer aneer net cad aneer net Visit us at www aneer net
Download Pdf Manuals
Related Search