User Manual
Contents
1. have the Camera secure in its Mount and the power cable tucked carefully out of the way you can plug in the adapter into your 12 24v socket Make sure the adapter is pushed all the way into the socket CONNECTING THE CAMERA TO THE MONITOR i The Yada Digital Tiny Traveler is a plug and play system No software or syncing is needed in order for the system to operate Once plugged in and both the Camera and the Monitor are powered on the Monitor will automatically show the image ofthe Camera FINAL ADJUSTING AND OPERATION OF THE DIGITAL TINY TRAVELER i Now that the system is connected sit in the driver s seat and turn on your vehicle while remaining in park ii Turn on the monitor by pressing the POWER button on the top on the Monitor The image from the Camera will appear in the Monitor iii You can adjust the angle or the placement of the Camera so that the image of the baby seat is in complete view on the Monitor iv To Adjust Brightness 1 Press MENU Go to Brightness by pressing Press Enter Button to enter Press or to adjust the brightness level Press Enter Button to confirm and exit a oP oN v The Camera has infrared Night Vision When the light becomes dark in the car or it is nighttime you will still be able to glance at your baby and see them clearly The image color will look different due to the night vision The 6 red LEDs surrounding the camera lens2. unobstructed and should be mounted so that its field of view includes the entire area around the baby seat Note that the image in the Monitor will be a reversed image of the baby The Yada Digital Tiny Traveler is made for use inside your vehicle It is not meant for outdoor use Do not get any of the Digital Tiny Traveler components wet or exposed to moisture At any time do not attempt to open the monitor or camera or use different cables other than provided with the original packaging During installation do not have the baby in the car The baby seat should be correctly mounted in the car as required by law There is no need to have the baby in the car while the Digital Tiny Traveler is installed and should be kept away as a precaution Before mounting the Camera check your local laws and regulations regarding where the device is legally allowed to be mounted The Monitor should be mounted securely as instructed At no time should it be loose or not fixed to the dash or windshield The Camera should be mounted securely as instructed At no time should it be loose or not fixed in place with the mounts provided DO NOT attach the Camera to the baby seat DO NOT lay the camera loosely in the baby seat This system is powered by plugging the adapter into the 12 24v adapter in your vehicle Do not attempt to use any other power source or cables to operate this system The Yada Digital Tiny Traveler is not a toy At no time should
3. window or rear most side glass that is not a door window For safety we recommend not mounting to the window of the door Because there is a power cable this can become dangerous when opening the rear or side door Ensure that the Suction Cup is secured tightly to the window and adjust the Camera to the angle needed Mag e To mount the Camera using the Single Pole Headrest Mount unscrew the tightening pin and move towards the main mount to separate the two clamps that go around the headrest pole Place the mount and clamp around the headrest pole that best suits the camera placement that is needed Secure the mount to the pole by pushing the pin back across the clamp and screw tightly The Camera can then be mounted on the bracket and adjusted to the desired angle This Mount can fit a headrest pole that is 10mm to 30mm in diameter If needed please use the additional foam grip provided iii Powering the Camera e The Camera comes with a 12 24v power adapter which can be plugged into any available socket in your vehicle The cable is 5 meter 16 feet long Starting with the power cord at the base of the Camera run and tuck the cable to the available socket you wish to plug in to Ensure that the cable is not in contact with the baby seat or within reaching distance of the baby It is recommended to tuck the cable behind the seat lining rug or panels in order to keep it fron tangling or getting caught on any object e Once you
4. Call B device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation Ifthis equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interference that may cause undesired operation FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment IMPORTANT NOTE FCC Radiation Exposure Statement T
5. children be allowed to play with it It should only be operated by adults who have read the safety and operating instructions listed in this manual This product contains small parts Adult installation is required Exercise care when unpacking and assembling the product 3 PACKAGE CONTENTS 1 UJ Digital Tiny Traveler Night Vision Camera 16 Feet 5 Meters 12v Power Cable Digital Wireless Tiny Traveler 4 3 Color Monitor Monitor Windshield Mount Mounts for Camera 4a Suction Cup 4b Headrest Mount with Straps Ac Single Pole Headrest Mount with Foam Grip 12 24V Power Adapter for Monitor User Manual 4 PRODUCTSPECIFICATIONS Digital Tiny Traveler Monitor 4 3 TFT color monitor 12V Digital Tiny Traveler Camera e CMOS Sensor e Night vision e VGA image quality 45 degree view angle e 16 feet 5 meter power cable e 12V 5 INSTALLATION GUIDE i Take the Digital Tiny Traveler Monitor from the packaging and attach the suction cup as shown gt MONITOR PLACEMENT ii Being able to safely glance at your baby should be comfortable and not require you to turn your head from facing forward For optimal ease of use we suggest mounting the Monitor low and near the center of your windshield below the center rear view mirror above your center control panel and fixed securely to the windshield Be sure that the monitor does not obstruct your view out the windshield for o
6. his equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment End users must follow the specific operating instructions for satisfying RF exposure compliance This transmitter must not be co located or operating in conjunction with any other antenna or transmitter To comply with FCC RF exposure requirements the device and the antenna for this device must be installed to ensure a minimum separation of 20cm or more from a person s body Other operating configurations should be avoided IC Statement Operation is subject to the following two conditions 1 This device may not cause interference and 2 This device must accept any interference including interference that may cause undesired operation of the device This device has been designed to operate with an antenna having a maximum gain of 0 dBi Antenna having a higher gain is strictly prohibited per regulations of Industry Canada The required antenna impedance is 50 ohms IMPORTANT NOTE IC Radiation Exposure Statements This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment End users must follow the specific operating instructions for satisfying RF exposure compliance
7. life Neither shall Winplus North America and or its affiliates have any liability for any decision action or inaction taken by any person in reliance on the Digital Tiny Traveler or for any delays inaccuracies and or errors in connection with the Digital Tiny Traveler and its functioning Winplus North America and or its affiliates shall have no responsibility or liability for damage and or injury resulting from accidents occurring with vehicles having the Digital Tiny Traveler installed and Winplus North America and or its affiliates the manufacturer distributor and seller shall not be liable for any injury loss or damage incidental or consequential arising out of the use or intended use of the product 7 GENERAL INFORMATION Customer Service Contact For questions or issues regarding the product please visit www letsyada com or contact Winplus in your area region to speak to our customer service representative Winplus North America Tel 866 294 9244 Email us at customercare winplususa com You can also contact us online by visiting www winplus com for more information about the product IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT DURING OPERATION DO NOT RETURN THE PRODUCT TO THE STORE CONTACT WINPLUS DIRECTLY FOR INSTRUCTIONS ON HOW TO RETURN EXCHANGE THE PRODUCT FCC ICC Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a
8. ny E Digital Tiny Traveler Wireless Baby Monitor for Your Car BT53901F 1 USER MANUAL ML 53901F_V1 IF YOU ARE EXPERIENCING ANY ISSUES WITH THE PRODUCT DURING OPERATION DO NOT RETURN THE PRODUCT TO THE STORE CONTACT WINPLUS DIRECTLY FOR INSTRUCTIONS ON HOW TO RETURN EXCHANGE THE PRODUCT PLEASE KEEP YOUR ORIGINAL RECEIPT AS PROOF OF PURCHASE MUST BE PROVIDED FULL WARRANTY INFORMATION IS INCLUDED IN THIS USER MANUAL Winplus North America Tel 866 294 9244 Email us at customercare winplususa com TABLE OF CONTENTS EOL iO aia 2 2 Important Safety IMT Orma ON ss ida 2 o A O II 4 A Product PEC Ca ON alain 5 o A era REA E 5 6 Mantenan Or ena reat esse teense raa o aRar o Un A 10 ene Fal Informatio cuina init 12 1 INTRODUCTION Thank you for purchasing the Yada Digital Tiny Traveler A Wireless Baby Monitor for your car Yada is dedicated to safe driving practices and strives to limit distractions for drivers The Yada Digital Tiny Traveler is intended to aid in helping drivers traveling with a baby remain focused on driving safely and still have the security of being able to glance at the baby in the back seat A driver s main focus should always be on the road and surroundings with operating the vehicle safely The Digital Tiny Traveler allows the driver to monitor the baby s activities without having to turn around and take their eyes off the road Please read all of the installation instructions caref
9. rdinary driving iii When mounting you will need to sit in the driver s seat just as you would while driving and angle the monitor until it is comfortable to glance at without turning your head away from watching the road v Plug the other end of the Power Adapter into an available 12 24v socket in your vehicle Please note that the cable should not wrap around the monitor but should stay to the right of the Monitor and run down the interior on the passenger side of your car At no time should the Digital Tiny Traveler Power Cable be loose or dangling on the driver s side of the vehicle CAMERA PLACEMENT AND OPERATION Note that the image in the Monitor will be a reversed image of the baby i Before selecting which Camera mount to use it is best to determine where in the car the Camera will best be placed in order to capture the image of the baby seat Make sure the camera is not located near the airbag ii If your baby seat is rear or front facing you have several options e Use the Headrest Mount with Straps to attach to the headrest of the front or back seat by pulling the vertical and horizontal straps and securing with the strap lock Camera should be mounted tightly to the headrest so that the Camera is stable The Camera can then be adjusted to angle accordingly to capture the entire baby seat The camera adjustment will take some force to change the angle pr m e Use the Suction Cup Mount to attach to the rear
10. s All repairs must be performed by Winplus North America All warranty claims must be accompanied by a copy of the sales receipt or bill of sale e The equipment must not have been altered or damaged through negligence accident improper operation or failure to follow the product instructions for installation use or care e The replacement of parts is excluded from the warranty when replacement is necessary due to normal wear and tear e Repair or replacement parts supplied by Winplus North America under this warranty are protected only for the unexpired portion of the original warranty e This is a repair or replace warranty only and does not cover the costs incurred for the installation removal or reinstallation of the product or damage to any other devices or vehicle OWNER S RESPONSIBILITIES Winplus North America will make every effort to provide warranty service within a reasonable period of time SHOULD YOU HAVE ANY QUESTIONS ABOUT SERVICE RECEIVED OR IF YOU WOULD LIKE ASSISTANCE IN OBTAINING SERVICE PLEASE CALL TOLL FREE 1 866 294 9244 DURING REGULAR BUSINESS HOURS MONDAY THROUGH FRIDAY 9 00 AM TO 5 00PM PST NOTE Toll Free is for North America Customers ONLY For customer service and technical support please call us at 1 866 294 9244 or email us at customercare winplususa com If at that time it is determined that a replacement unit is needed the support representative will issue a Return Authorization and instr
11. uct on how to get a new unit Winplus North America makes no other warranty of any kind aside from the limited express warranty stated herein DISCLAIMER OF WARRANTIES INCLUDING WARRANTY OF MERCHANTABILITY AND WARRANTY OF FITNESS FOR PARTICULAR PURPOSE EXCEPT AS SPECIFICALLY SET FORTH HEREIN NO WARRANTY OR REPRESENTATION EXPRESS OR IMPLIES IS MADE AS TO THE TINY TRAVELER EXCEPT AS EXPRESSLY SET FORTH HEREIN WINPLUS NORTH AMERICA AND OR ITS AFFILIATES EXPRESSLY DISCLAIMS WITHOUT LIMITATION ANY STATUTORY WARRANTIES AND ALL IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE Winplus North America and or its affiliates do not guarantee or promise that the user of Digital Tiny Traveler will not be in an accident or otherwise not collide with an object and or person Our Digital Tiny Traveler is not intended in any way to be a substitute for careful and cautious driving or for the consistent adherence to all applicable traffic laws and motor vehicle safety regulations Winplus North America and or its affiliates are not responsible for a user s intended or actual use of the Digital Tiny Traveler In no event shall Winplus North America and or its affiliates have any liability for any losses whether direct or indirect in contract tort or otherwise incurred in connection with the Digital Tiny Traveler including but not limited to damaged property personal injury and or loss of
12. ully before installing the product Improper installation or use will void manufacturer s warranty 2 IMPORTANT SAFETY INFORMATION WARNING Consult local laws and regulations for any restriction on installation or use and obey all legal requirements for safe vehicle operation including those related to distracted driving WARNING A failure to read and follow these warnings and instructions may result in a serious accident including damaged property or a serious injury including loss of life Please keep this user manual for further reference WARNING The Yada Digital Tiny Traveler is a system that is intended as an aid to monitor your baby while you are driving by allowing for quick glances at your baby while facing forward and without turning around and taking your eyes off the road It is not a substitute for responsible and proper adult supervision of children and should not be used as such Make sure that at no time does the Digital Tiny Traveler Camera or Cables come in any contact or within reach of the baby Check your local laws and regulations about having a video display with constant content while driving Please take note that the Monitor will show the image taken by the Camera continuously as long as they are connected the car is running and the Monitor is powered on This product will only provide images of items that are within the field of view of the camera Thus it is imperative that the camera should be kept clean and
13. will illuminate but no light will be shining on the baby 6 MAINTENANCE amp WARRANTY a Maintenance e Atnotime is the Monitor or Camera to become wet or immersed in water To clean use a soft cloth to wipe the lens and enclosure e Donot use alcohol benzene or thinner to clean the Monitor or Camera This will cause discoloration To clean the camera wipe with a clean cloth dampened with mild cleaner diluted with water and then wipe with a dry cloth i Do not stick any foreign object into the ports on the monitor The ports are intended for the cables provided only b Warranty WINPLUS NORTH AMERICA LIMITED WARRANTY Winplus North America warrants to the original purchaser that its products are free from defects in material and workmanship for 1 year from the date of original purchase Where permitted by law Winplus North America s liability shall be limited to that set forth in this limited express warranty This limited express warranty shall be the exclusive remedy of the purchaser and Winplus North America makes no other warranty of any kind aside from the limited express warranty stated above NOTE Warranty only applies for North American customers of purchases made in North America CONDITIONS OF WARRANTY If during the 1 year warranty period your new product is found to be defective Winplus North America will repair such defect or replace the product without charge for parts or labor subject to the following condition
Download Pdf Manuals
Related Search