Soltron V-50 Space Cab
Contents
1. The unit has to be disconnected from power supply before cleaning acrylics or lamps or engaging in the maintenance of the product Clean the lamps with specific products for cleaning glass surfaces Clean the acrylic without using detergent products containing alcohol the surface could become dull and therefore stop a part of the UV Various suitable products are readily available on the market for this purpose Clean the equipment especially the parts in contact with non aggressive disinfectant products Various suitable products are readily available on the market for this purpose Periodically make sure that the air intakes are not blocked with dust or other materials tissues etc Periodically replace the lamps and the starters normally between 400 and 600 hours of use For replacing lamps and starters e Disconnect the unit from power supply e Unscrew and remove the 2 screws on the upper side of one acrylic panel and remove the metal cover e Unscrew without removing the 2 screws on the lower side of the acrylic panel Lift up the acrylic from screws and store safe place to avoid damage e Remove the lamps by turning them 90 and pulling out from lamp holders e Install new lamps by repeating the same operations in reverse e Clean lamps and acrylics before closing the panel e Power the tanning system on after completing the process All operation that access electrical parts have to be completed by a quali2. SUNMAKER Soltron Space Cab User manual Soltron Space Cab User manual Nome File USER MANUAL SOL_US021105 Revisione 02 11 2005 Soltron Space Cab User manual INTRODUC TION israel aaa aa 2 IMPORTAN Tocina dd ada 2 WARRANTY citohen a aia as 2 EQUIPMENT DATA a 3 COMPULSORY PRECAUTIONS Sii ea 5 sio iran 5 tai ies 6 SAFET POLE 7 OREA NING OM O AO 7 INSTALLATION conca 8 PAGKAGING A E ana 8 O 9 HOW INSTALL THE UNIT 00 c cece cece cece eee e ee eeeeeeeeeeee reese eee aaaaaaaaaeeeeeeeeeeeeeeeeeeeeaaaaaas 10 FUNC TONING MODE 2 A A 17 OPERATING INSTRUCTIONS ai A A A eee 17 PROGRAMMING ni A ee 18 REMOTE GONTROL CONNECTION ocur a 21 ROUTINE AND EXTRAORDINARY 22 MAINTENANCE REGISTER catan adi is 23 Soltron Space Cab User manual INTRODUCTION In thanking and congratulating on your choice with this manual we are illustrating in the simplest possible way the general instructions for use and maintenance of the vertical solarium Soltron Space Cab IMPORTANT IMPORTANT before installing the equipment carefully read the present manual and follow the technical operating instructions and advice contained in it The material contained in this document is given exclusively for informative purposes and is subject to
3. N r Removing the access key from any page you ll come back to page 1 Pressing ENT next page appears 4 5 S S O N 00 lt gt T SC press ESC for going back to page 1 Selecting buttons lt or gt you can shift to several functions of the menu and after the last page you ll find the first one again 5 10 11 MINUTES 00231 lt gt RES ESC press ESC for going back to page 1 LAMP HOURS 0000 3 lt gt RES ESC press ESC for going back to page 1 UNIT HOURS 00003 lt gt ESC press ESC for going back to page 1 COOLING lt gt ENT ESC press ESC for going back to page 1 REMOTE CONTROL lt gt ENT ESC press ESC for going back to page 1 VERSION ENGO 1 lt gt ESC press ESC for going back to page 1 AUDIO SYSTEM lt gt ENT ESC press ESC for going back to page 1 Soltron Space Cab User manual From page 5 5 MINUTES 00231 2 gt RES ESC press ESC for going back to page 1 This value is a minute counter you can reset this value when you need
4. modification without notice Despite the maximum attention paid in preparing the document JK Products Inc is not responsible for any damage deriving from errors or omissions or from the use of this information Keep this manual and all the attached documentation in an accessible place known to all the operators WARRANTY The equipment is warranted for a period of 12 months The warranty is limited to the repair or replacement of the faulty part and is not valid for malfunctions due to incorrect use and or tampering and repairs carried out by unauthorized persons The warranty does not cover elements due to normal use like starters and lamps The warranty does not cover costs of labour and possible shipment costs However there is a 90 day labour warranty The warranty is cancelled if the instructions contained in the present manual are not followed The warranty becomes effective from the date given in the delivery document Soltron Space Cab User manual 2 EQUIPMENT DATA Model 1 PE single phase 220V ac 58 A 48 X 40 X 94 1200 x 1000 x 2350 millimeters 52 X 51 X 94 1290 x 1265 x 2350 millimeters Installation site in dry rooms with sufficient air supply more than 1 177 CFM 2000m h Relative air humidity lt 70 Ambient tem
5. Keeping pressed RES button for at least 3 seconds minutes value will be reset to 00000 From page 6 6 LAMP HOURS 00003 lt RES ESC press ESC for going back to page 1 This value is a hour counter you can reset this value when you need for example when replacing lamps Keeping pressed RES button for at least 3 seconds lamp hours value will be reset to 00000 From page 7 7 UNIT HOURS 00003 lt gt ESC press ESC for going back to page 1 This value is a hour counter but this is not erasable this represent the total life of the unit Keeping pressed RES button for at least 3 seconds lamp hours value will be reset to 00000 From page 8 8 COOLING lt gt ENT ESC press ESC for going back to page 1 Press ENTER for the next page 8a COOLING Value 180 is blinking lt gt MEMO ESC press ESC for going back to page 8 Pressing lt or gt buttons you can modify the cooling value with steps of 30 seconds from a minimum of 180 to a maximum of 300 seconds Pressing MEMO button you can see for some seconds the following page PARAMETER PROGRAMMED If the sentence PARAMETER NOT PROGRAMMED appears please repeat the operation Soltron Space Cab U
6. as the following page 1 5 O t r O n 5 T A R This page will come back after 3 minutes without pressing any button pressing of the 4 buttons the following page will appear 12 TIME R E 0 0 0 5 T A R T E S C press ESC for going back to page 1 Pressing START button a free potential switch will be closed start command and this switch will remain closed for 5 seconds and then will open again If a start arrives from the external connector the session begins 12a TIME R E 0 0 1 3 S T O Increasing time is displayed At the end of the treatment or pressing STOP button page 2b will be displayed cooling REMOTE CONTROL CONNECTION On the external side you have a 6 pole connector on the top back of the unit to allow the interfacing to the external control In the drawing below you can see how to connect the unit to a generic external control 230 N Internal Start Input 230Vac L1 For start from N1 external control Soltron Space Cab 0 O 21 External start Soltron Space Cab User manual ROUTINE AND EXTRAORDINARY MAINTENANCE To keep the solarium efficient carry out the following simple operations
7. chapter is to describe how the system works giving a detailed description of several pages on the display and of several steps during a treatment it s also possible to setup some features of the unit The electronic control device mainly carries out the function of a timer it enables a tanning treatment of programmed duration to be carried automatically switching on and off of the lamps and the cooling fans of the tanning system Implemented in the electronic device are also meters in which the equipment activity times are memorized and that can be used for controlling takings OPERATING INSTRUCTIONS Before approaching the unit for a tanning session please read carefully chapter 3 on compulsory precautions The first page you can see shows as the following 1 Soltron START This page will come back automatically if you do not press any button for 3 minutes of course not during the tanning session pressing one of the 4 buttons you can enter the following page 2 SESSION 10 00 START ESC press ESC for going back to page 1 The treatment duration shown on the display is the last one you have entered in the service menu Pressing START button the page below will be shown and you can listen the following vocal message Welcome we hope you enjoy your pleasant moment of relaxation while you tan Please make sure you removed all make
8. crylic surface Before cleaning remove rings watches and bracelet CAUTION Do not use excessive amounts of water any abrasive cleaners or any spray cleaners that carry label warnings regarding reactions to contact with skin Do not use products containing alcohol Soltron Space Cab User manual 4 INSTALLATION PACKAGING The pacakging for Soltron Space Cab is so composed 1 pallette 88 X 44 X 37 high 2200 x 1100 x 930 high mm 1 pallette 48 X 40 X 14 high 1200 x 1000 x 360 high mm The external boxes are in Vulcan cardboard this means a high robustness and a high resistance to hits The parts inside are placed on special polyester seats that allow to insert in one box 6 panels with tubes without risk of damaging the polyester seats make the panels separated one to each other and make that the weight of the upper panels do not impact on the panels below but on the seats Soltron Space Cab User manual CABIN The ventilation of the room must be adequate The room will have a possible duct for exhausting hot air produced by the tanning equipment out For optimum performance of the tanning system it is advisable to comply with the measurements distances given below 50 cm 20 20 50 cm 40 100cm Soltron Space Cab User manual HOW TO INSTALL THE UNIT Take out from the package the metal brackets The brackets are numbered too as shown on the right B Each panel
9. dvisable after hair removal or particular treatments Exposure is strongly unadvised to pregnant persons Before carrying out the tanning treatment remove any cosmetic products and make up do not use products containing alcohol do not spray perfumes and deodorants Remove any jewelry and contact lenses During exposure always wear protective glasses If the eyes are inadequately protected they can develop superficial inflammation reddening after excessive exposure and in certain cases there could be damage to the retina repeated exposure could cause cataracts Do not expose yourself to the sun on the same day on which a tanning system has been used Only one person can be exposed to the product at a time Always use the special protection glasses one pair is provided with each system The following picture shows the correct position of the body inside the cabin YES NO Soltron Space Cab User manual SAFETY RULES Before turning the appliance on the salon operator must perfectly know the position and function of all the controls and the characteristics of the equipment Moreover the operator must have carefully read and fully understand the content of this manual The salon operator is responsible for informing users on possible risks during tanning The operator has to follow indications on labels attached to the unit these labels must not be removed Installation and extraordinary maintenance of the unit has to be done b
10. fied technician Before accessing inside the unit disconnect power supply For replacement of lamps eyewear or parts contact JK Products and Services 1 Walter Kratz Drive Jonesboro AR 72401 877 786 5267 22 Soltron Space Cab User manual MAINTENANCE REGISTER Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement Starter replacement Other Next intervention in Notes Stamp and signature of authorized technician Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement Starter replacement Altro Next intervention in Notes Stamp signature of authorized technician Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement L Starter replacement Other Next intervention in Notes Stamp and signature of authorized technician 23 Soltron Space Cab User manual Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement L Starter replacement Other Next intervention in Notes Stamp and signature of authorized technician Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement Starter replacement Altro Next intervention in Notes Stamp and signature of authorized technician Intervention No Date of intervention Total hour
11. he skin and skin cancer WEAR PROTECTIVE EYEWEAR FAILURE TO MAY RESULT IN SEVERE BURNS OR LONG TERM INJURY TO THE EYES Medication or cosmetics may increase your sensitivity to ultra violet radiation Consult a physician before using sunlamps if you are using medications or have a history of skin problems or believe you are especially sensitive to sunlight If you do not tan in the sun you are unlikely to tan from the use of this product This unit utilizes UV lamps Replace only with Cosmolux VHR 9K90 When using this booth stand upright on center of the floor Minimum use distance is 6 inches or 15 25 centimetres from acrylic Operation of this device below the recommended minimum distance for use may result in overexposure EXPOSURE SCHEDULE Recommended Exposure schedule Skin type Weekly 2 4 A Ill average 2 V dark brown Maximum exposure time is 10 minutes Here is a brief description of skin types Skin type Il fair This is the individual that usually burns easily and severely tans minimally or lightly and peels Skin type Ill average Often referred to as Average complexion burns moderately and tans about average Skin type IV brown This individual burns minimally tans easily and above average with each exposure Skin type V dark brown This individual s system rarely burns tans easily and substantially Tanning can begin on regular basis An appearance of tanning normally appears af
12. of the unit is assigned a number from 1 to 6 see on the right so you can see which is the right position of the panel Fix the brackets on the bottom side of panel 2 brackets number 1 and 2 and panel 5 brackets number4 and 5 and insert the feet For fixing brackets use nuts from bag 1B 1 il o as 10 Soltron Space Cab User manual Insert the 2 long metal brackets on panel 2 then fix them with screws in bag 1A see below Do not attach all at this time Connect panel5 to panel 2 inserting panel5 into long brackets as shown below without completely tightening the screws At the end of this operation the two panels can stand up by themselves On the bottom side of panel 4 attach bracket number 3 with the foot as shown on the right 11 Soltron Space Cab User manual Attach panel 4 to panel 5 Insert 2 screws into the bottom of the panel M6 nuts should be attached to the screws and not securely fastened at this time Panel 3 has no brackets on the bottom it has to be inserted between panel 2 and 4 Carefully place the screws on the bottom of the panels through the access holes in the mounting plate Secure the panel in its place using the M6 nuts from the bottom Soltron Space Cab User manual Position the roof over the four panels Power cables for each panel should pass through the holes provided in the roof Insert M6 nuts on rear side wi
13. perature lt 30 C 86 F The unit must not be operated in case of faulty of control panel ATTENTION or some broken parts Electrical connection Mains voltage 220 V three phase 60 Hz 220 V single phase 60 Hz Needed cable cross section 4x8 AWG 3 4 AWG Soltron Space Cab User manual Accessories Lamps number of Cosmedico VHR 9K90 48 UV protective eyewear 2255 dark red 1 number of Acrylics are special glass panels for this kind of use with a high UV transmittance Despite of superior production technology sometimes minor spots air bubbles or micro fine hairline cracks can occur with use These occurrences are material dependent and unavoidable in processing however have not significant effect on the final effect and can not be recognized as defects For replacement of lamps eyewear or parts contact JK Products and Services 1 Walter Kratz Drive Jonesboro AR 72401 877 786 5267 This unit is intended as exclusive use in the US and Canada and can not be exported or operated in other countries The manufacturer shall bear no responsibility in case of non observance Here is a copy of the label on the unit Soltron Space Cab User manual 3 COMPULSORY PRECAUTIONS DANGER Ultraviolet radiation Follow instruction to avoid overexposure As with natural sunlight overexposure can cause eye and skin injury and allergic reactions Repeated exposure may cause premature aging of t
14. replacement L Other Next intervention in Notes Stamp and signature of authorized technician 26 Soltron Space Cab User manual 6 NOTES 27 Soltron Space Cab User manual 28
15. s of operation Type of intervention Lamp replacement L Starter replacement Other Next intervention in Notes Stamp and signature of authorized technician 24 Soltron Space Cab User manual Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement Starter replacement L Other Next intervention in Notes Stamp and signature of authorized technician Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement Starter replacement Altro Next intervention in Notes Stamp signature of authorized technician Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement Starter replacement Other Next intervention in Notes Stamp signature of authorized technician 25 Soltron Space Cab User manual Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement L Starter replacement ES Other Next intervention in Notes Stamp and signature of authorized technician Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement Starter replacement Altro Next intervention in Notes Stamp signature of authorized technician Intervention No Date of intervention Total hours of operation Type of intervention Lamp replacement L Starter
16. ser manual From page 11 11 AUDIO SYSTEM lt gt ENT ESC press ESC for going back to page 1 Pressing ENT button the following page will appear lla AUDIO ENAB is blinking lt gt MEMO ESC press ESC for going back to page 11 Selecting lt or gt you can choose between ENAB and DISAB that means that vocal messages are active or not 11b AUDIO DISAB is blinking lt gt MEMO ESC press ESC for going back to page 11 Pressing MEMO button the chosen option is saved From page 9 9 REMOTE CONTROL lt gt ENT ESC press ESC for going back to page 1 Pressing ENT button the following page will appear REMOTE ENAB is blinking lt gt MEMO ESC press ESC for going back to page 9 Selecting lt or gt you can choose between ENAB and DISAB that means you the unit is controlled by an external timer remote control enabled or by the internal one disable 9b REMOTE DISAB is blinking lt gt MEMO ESC press ESC for going back to page 9 Pressing MEMO button the chosen option is saved 20 Soltron Space Cab User manual the remote control function is enabled the display will appear
17. ter a few exposures and maximizes after 4 weeks of exposure following the recommended schedule for your skin type Use protective eyewear SCHMERLER 2255 Dark Red or equivalent as defined under 21CFR 1040 20 2 b 6 Read instruction booklet before using lamps Soltron Space Cab User manual WARNINGS Occasionally persons using the tanning system will experience a slight reddening of the skin usually in small patches after the second or third session This redness is often accompanied by an itching sensation This may be nothing more than a heat rash caused by heat from the lamps within the system should go away within approximately 24 hours and should not reappear This rash can be lessened or prevented by applying moisturizer lotion to the affected area after the tanning session Is completed Increasing tanning also requires an extension of the exposure time or after a certain degree of tanning has been achieved a further intensification is not possible However the tanning time may not be extended as desired within the scope of the permissible exposure schedule Therefore only a certain degree of final tanning dependent on the skin type can be achieved without endangering your health Special attention must be paid in cases of marked individual sensitivity to ultraviolet radiation and if medicines or cosmetics are used in this case it is recommended to previously consult a doctor Exposure to UV rays 15 ina
18. thout tightening them all the way Insert plastic cylinders on the top side of panel 1 and 6 doors Soltron Space Cab User manual Insert the door first insert the bottom side see picture on the right then raise the front of the roof and insert the top of the door remember the cable trough the hole see picture below Repeat the same operation with the second door Now you can tighten the nuts on the roof Insert cables from the panel through the roof Hii z Connect white plastic connectors with the same number 14 Soltron Space Cab User manual Take the external handle and fix it on the left door using screws on bag 4 and aluminium cylinders on bag 5 take care on fixing step by step one all screw otherwise you can damage the handle Fix the 2 internal handles with screws on bag 6 to the doors Fix the 2 internal support handles with screws on bag 7 to the internal side of the roof Remove plastic covers from internal side of panels acrylics and metal covers Put the metal cover on the top 15 Soltron Space Cab User manual Remove the box cover from the side of the roof and connect power supply to box connectors Repeat the same operation with the 6 pole connector to external timer if needed Switch on the unit check that all lamps fans and the main ventilator are on 16 Soltron Space Cab User manual 5 FUNCTIONING MODE The purpose of this
19. up and contact lenses and you re wearing protective goggles To control the ventilation use the dial on the lower right of the 2a TIME REM 10 00 Vocal message running START STOP If you press the START button a second time during voice speaking the session begins immediately otherwise it begins automatically at the end of the message the following page appears 2b TIME REM 09 48 Decreasing time is shown sTOP At half time of the session you ll listen the following vocal message You re now halfway through your sunbed session When 10 seconds to the end are missing you can hear the following vocal message Your session is now ending Thank you and goodbye 17 Soltron Space Cab User manual Pressing STOP button the session terminates and if there s a cooling time set up the following page will be shown 2c O 5 5 O N C O O L NG At the end the program will come back to page 1 All operations shown before can be executed without any access key PROGRAMMING Using the access key you can enter inside the service menu insert the key and press any button the following page will be displayed 3 5 R V U E
20. y qualified technicians It is absolutely prohibited to obstruct the ventilation ducts of the equipment This device is intended to be used with the following lamps Cosmolux VHR 9K90 Provided eyewear are SCHMERLER 2255 Dark Red or equivalent as defined under 21CFR 1040 20 2 b 6 For replacement of lamps eyewear or parts contact JK Products and Services 1 Walter Kratz Drive Jonesboro AR 72401 877 786 5267 Lamps eyewear and other components have to be replaced by original manufacturer parts Any tampering or unauthorized replacement of one or more parts or units of the equipment the use of accessories or consumable materials other than the originals in any case are not recommended by the manufacturer Use of non compliant components could represent an accident risk and relieves can represent an accident risk and relieves the manufacturer of any liability This unit is intended as exclusive use in the US and Canada and can not be exported or operated in other countries The manufacturer shall bear no responsibility in case of non observance CLEANING For maximum efficiency of your tanning unit periodic cleaning of lamps reflectors and the inside of acrylics is required Refer to relamping instructions for acrylic removal The breaker for the tanning system must be switched off before removing acrylics lamps engaging in the maintenance of the product For cleaning acrylics do not use dry cloth it can scratch the a
Download Pdf Manuals
Related Search