250-8072 4.3” Rearview Mirror/Monitor User Manual -
Contents
1. Rostra Precision 250 8072 4 3 Rearview Mirror Monitor User Manual Controls Inc K A Safety and Installation Instructions J Product Features v Built in support for two video inputs Video 1 Video 2 mirror normal image can be set individually gt Secure the monitor in such a way that it cannot become loose under any circumstances i e sudden braking rough roads v automotive accident and cause injury to the vehicle s through the MENU occupants gt The rearview image will appear automatically on the screen gt Do not attach the monitor in an area that may be used by an when the vehicle s reverse gear is activated airbag as this could cause injury if the airbag is triggered gt Includes adjustable parking gridlines gt Do not open the monitor gt The mirror monitor can be used with both 12 volt and 24 volt Do not submerge the monitor in water The monitor is not systems waterproof gt Includes straps for attaching monitor to pre existing vehicle gt When mounted the monitor should not impair your vision rearview mirror v gt Do not operate the monitor if the housing has been damaged High Low Short circuit protection To prevent damage to the unit or failure of the fuse ensure correct power polarity gt Do not press the LCD display Do not drop the monitor Monitor Controls Settings 1 CAM Select Power This button combines two functions Press CAM Select Power to shift bet2. sure reliable operation of the monitor by protecting against overheating These holes must not be blocked or covered SERVICING Do not attempt to service this system by yourself as opening or removing covers may expose you to dangerous voltage or other hazards Rostra Precision Controls Inc 2519 Dana Dr Laurinburg NC 28352 1 800 782 3379 www rostra com
3. ween Video 1 and Video 2 Press and hold CAM Select Power for 2 seconds to power off the monitor Press lightly again to power back on v 2 MENU Contrast Control Adjust the contrast control for the desired overall best picture Brightness Control Adjust the brightness for the best overall picture or display brightness Color Control Adjust the color for the best picture color display Normal Mirror Image Setting You can set Normal Mirror image for CAM1 and CAM2 CAM Select Power separately Park OENE l ae Red to ignition 12V Parking assist lines are only available when the vehicle is in reverse The lines can be adjusted horizontally by Black to vehicle ground pressing or to the appropriate position per your actual O _ parking condition and this setting is stored in memory g u Green to reverse light IT Cleaning and Maintenance If your vehicle has been parked in direct sunlight resulting in a considerable rise in temperature inside the vehicle allow the unit to cool before operating As well if your vehicle has been parked in extreme cold conditions allow the unit to warm up before operation CLEANING Unplug or power off the unit before cleaning Do not use liquid cleaners or aerosol cleaners Use only a damp cloth for cleaning Never use strong solvents such as thinner or benzine as they might damage the finish of the unit VENTILATION Holes in back of the unit are provided for ventilation and en
Download Pdf Manuals
Related Search