user manual - Solo Intelligent security systems
Contents
1. Don t operate device beyond following values Temperature Between 40 C and 65 C Humidity gt 95 in 40 C POWER SUPPLY Use the device only with voltage mentioned in this guide If you are not sure about supply voltage you will connect please contact with your vendor SUPPLY CABLE PROTECTION Protect the supply cable against crushing and breaking SERVICE Do not attempt to service this unit yourself as there is no user serviceable part inside To prevent electric shock do not remove covers In case of breakdown contact with your vendor or manufacturer Refer all servicing to qualified personnel CONDITIONS NEED SERVICE Contact with your vendor on the following conditions a Ifthe device is dropped or the device s cover is damaged b If you realize that device doesn t operate properly c Ifthe device doesn t operate as mentioned in operating guide d Ifthe device isn t operated in operating conditions SPARE PART If maintenance includes changing ensure that technician uses original parts against electrical shock fire etc SECURITY CONTROL To control if your device operates in healthy and convenient conditions demand service from your vendor BD 1 05 035 2 8 TEKNIM CONFIGURATIONS Siren tone TONE option 4 different siren tone can be choosed TONE INTRUDER 1 INTRUDER 2 Cutoff time TIMER This option provides selecting how much time the sounder works during alarm Defau2. Sliding light Test Bution O O o Rechargeable NI MH Battery OoOo oo e Sabotage switch Second sabotage switch against cover screw protection ABS cover oo o e S Polycarbonate cover ae E Metal cover against impact 2 piezo y y oS BD 1 05 035 3 8 TEKNIM FIRST MOUNTING VAS 730 770 has a special system to prevent technician and other people from disturbing on first mounting Before connecting supply voltage to siren battery BATT bridge is taken to ON position Normally siren alarms if supply voltage isn t connected But this doesn t work at this moment and then when the supply voltage is connected device becomes normal MOUNTING INSTRUCTIONS Mount the device to places that won t be exposed to direct sun light and rain Also give importance to mount the device on a place where it is seen but can t be reached easily Point the mounting holes and cable in hole by using siren back plaque or the template on its cartoon box and then drill holes by using 8mm tip By using longer drill tip than the thickness of the wall drill the wall as the cable pass through the wall Mount the siren by using the given screws and suitable screwdriver Don t forget to pass cables through the hole on the body JUMPER SETTINGS J11 Battery BATT jumper After mounting the device take this jumper to ON position Default value is OFF to activate siren battery J2 POWER MODE jumper SAB position Supply voltage is provid
3. TEKNIM TECHNICAL SPECIFICATIONS Siren loudness 1m O Current consumption 12 V o y O Oo Siren O Siren o Stand by 10 mA Weight Packaged VAS 770 MANUFACTURER BILGI ELEKTRONIK TELEKOMUNIKASYON SIST SAN ve TIC A S ADDRESS ATATURK MAH NAMIK KEMAL CD NO 11 ATASEHIR GUMRUK CIKISI 34758 KADIKOY ISTANBUL TURKEY TEL 90 216 455 88 46 47 48 49 FAX 90 216 455 99 06 www teknim com info teknim com This product is produced by Bilgi Elektronik A S which has 158211 numbered certificate of ISO 9001 2000 Quality Management Systems certified by BVQI BD 1 05 035 8 8 TEKNIM VAS 730 amp VAS 770 OUTDOOR SIREN MOUNTING amp OPERATING MANUAL Issue Date 23 06 2005 CE BD 1 05 035 TEKNIM SAFETY PRECAUTIONS Please read this guide carefully before operating device and keep this guide for later reference Follow all operating and safety instructions in this manual Do not use this device indoor or else it may cause personal injury due to high sound pressure level While mounting use ear protection The device produces high voltage while operating After turning off the power wait for a minute before servicing Disconnect the electricity before cleaning Don t use liquid or aerosol cleaners use a damp cloth for cleaning Keep away devices from dust and moisture Locate device to the straight place or else it may damage device and its environment OPERATING CONDITIONS
4. ed by panel normally If supply voltage is cut off this voltage is provided by battery SCB position Supply voltage is provided by battery in all conditions At this time current consumption will be lower but siren loudness too This jumper s default position is SAB J5 PIEZO jumper If the jumper is in 1 position one piezo becomes active If the bridge is in 2 position two piezo become active If siren operates with two piezo current consumption increases by 250 mA J6 TAMPER jumper Tamper output could be done with 2 wire connection NORM or 1 wire connection NEG In NEG position OUT can be used as Tamper output IN is in GND Default value is NORM 2 wire connection J8 PULL jumper Look at the triggering options BD 1 05 035 4 8 TEKNIM CABLE CONNECTIONS Example 1 6 wire connection with sabotage alarm TRIGGERING 12V SUPPLY VOLTAGE 12V STROBE SUPPLY OV STROBE SUPPLY NOTE J6 TAMPER JUMPER SHOULD BE IN NEG POSITION 12V 5 12 gt 20 _ COM COM aux 2 pem G7 ZB M VAP404 ALARM PANEL Configurations 1 TAMPER jumper is in NEG position 2 PULL jumper is in UP position 3 POWER MODE jumper is in SAB position lf2 sirens are connected one of them should be in SCB position BD 1 05 035 5 8
5. irens VAS 730 770 offers different colour options programmable siren tone options sliding lights SAB SCB power option and also provides wide area for firm logo with its body designed with 3D CAD CAM OPERATING To operate device connect supply voltage and put the battery BATT jumper to ON position At this time 4 LED begins flashing to inform you that siren is ready and then device goes into the stand by mode In stand by mode LEDs slide to show that siren is ready Also in stand by mode battery charges In stand by mode if supply voltage is cut off the device perceives this as a sabotage and goes into alarm immediately This situation continues until the end of cutoff time If supply voltage is connected again siren becomes silent immediately If siren is triggered in standby mode and pre warning system is OFF siren goes into alarm If pre warning system is ON siren generates small beep sounds to indicate that siren will go into action in a few seconds At this time if the switch is in SAB mode siren current is provided by alarm panel If the switch is in SCB mode siren current is provided by siren battery Siren continues to be in alarm mode until the end of triggering or until the end of the cutoff time By pressing the test button siren can be controlled if it works or not VAS 730 VAS 770 Ee a Delay time with warning tone Configurable Cutoff Timer 3 15 minute SAB SCB operating mode a
6. lt value is Continuous Default Value Siren speed SPD Siren speed can be increased by two times by using this switch Default mode is HIGH Sp SPD S REN SPEED OFF High aodai doe a in a Oo Triggering option POL This option is configured together with POL switch and J8 PULL jumper Configure triggering as the following Swi ALARM ON J8 PULL DN If OV is disconnected If 12V is connected ARARERRF If OV is connected ON Default value Pre warning PWE When using this option siren creates warning sound during 6 8 sec before siren is triggered If triggering continue siren goes into alarm Default value is OFF an PWE PRE WARNING a ENABLE i DISABLE BD 1 05 035 7 8 u z L hipa Ead 4 is O Tiaa HORM NES _ TEF EE FEF TLF 16 NOTE J6 TAMPER JUMPER SHOULD BE IN NEG POSITION Example 3 6 wire connection with sabotage alarm of 2 sirens 12 SUPPLY OV SABOTAGE RETURN TRIGGERING PANEL NOTE J6 TAMPER JUMPER SHOULD BE IN NORM POSITION 12 STROBE SUPPLY DU 1 UU UII TEKNIM 6 8 Features O 4 different siren tone High Low speed sounder a E E TEKNIM VAS 730 amp VAS 770 OUTDOOR SIREN MOUNTING and OPERATING INSTRUCTIONS Thank you for choosing VAS 730 770 outdoor s
Download Pdf Manuals
Related Search