File - IO
Contents
1. Hsinchu City 30055 Taiwan http www io power com e mail 10 power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 WLAN Setup and VOIP Setup See page 6 for details WLAN Setup gt Security Type Select Setting gt WLAN Setup gt WLAN IP Setup gt Change gt Security Type this product support security type of Open WEP WPA2 WPA PSK WPS etc you can choose the different type for different WLAN The operation is the same to the WEP Open type you can set it following the indication VOIP Setup gt VOIP methods gt Keep Alive You can choose to keep Alive or not to change the interactive frequency between the WiFi Phone and the server When you keep alive the phone the interactive frequency becomes larger when you don t keep alive the frequency becomes smaller WiFi Phone doesn t keep alive by default normally this will not affect your use of the phone PING Test Select Menu gt Settings gt PING test PING test is for testing network delay and for users to view the current network status Under this function interface you can manually input any IP address for testing or can choose the complete gateway DNS SIP server SIP proxy and STUN server for testing Time Date Select Menu gt Setting gt Time date you can set the time and date of your phone here You can also select a mode of the time date format Upgrade Server Address Select Menu gt Setting gt Upgrade Server Address enter the upgrade server address in window2. SWITCH ON SAFELY Do not switch the phone on when wireless phone use is prohibited or when it may cause interference or danger ROAD SAFETY COMES FIRST Obey all local laws Always keep your hands free to operate the vehicle while driving Your first consideration while driving should be road safety INTERFERENCE All wireless phones may be susceptible to interference which could affect performance SWITCH OFF IN RESTRICTED REGIONS Follow any restrictions Switch the phone off in restricted regions USE SENSIBLY Use only in the normal position as explained in the product documentation Do not touch the antenna unnecessarily GUALIFIED SERVICE Only gualified personnel may install or repair this product ENHANCEMENTS AND BATTERIES Do not replace components Use only approved enhancements and batteries Do not connect incompatible products Replacing batteries must be done in a safe place with the same type batteries Do not disassemble recharge or replace the battery in hazardous locations Charging must be conducted in a safe place with the charger provided by manufacturer Do not use or recharge the battery in heat fire or direct sunlight locations THE PERFORMANCE OF THREE PROOF Your phone has a waterproof explosion proof dust proof and anti drop performance but uses it with care BACK UP COPIES Remember to make back up copies or keep a written record of all important information stored in your phone CONNECTING TO OTHER DEVICES When conne
3. received and dialed calls the approximate duration of all calls The phone logs missed and received calls if it is switched on within the network service area and the network supports these functions Speed Dial Select Menu gt Call gt Speed Dial you can dial the number key once for a call number Form No IOP OAPA 001 001 15 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan nttp www io power com e mail io power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 Message Create Select Menu gt Message gt Create then edit a new message here and sent it out Inbox Select Menu gt Message gt lnbox you can look over the messages you have received here This box can only store 20 messages at most when it s full please delete some old once in time Outbox Select Menu gt Message gt Outbox you can look over the messages you have sent here This box can only store 20 messages at most when it s full please delete some old once in time Drafts Select Menu gt Message gt Drafts you can look over the messages you have store here This box can only store 20 messages at most when it s full please delete some old once in time Group list Select Menu gt SMS gt Group list you can add and edit the group list or view and change the contacts in this list You also can send group SMS to the group list users Group list gt 1 View list gt
4. G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail 10 power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 Industrial WiFi SIP Phone Model IOP WPD 2409 B2 User Manual Ver 1 1 Form No IOP OAPA 001 001 1 22 Retention date 6 Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail 10 power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 Table of Content FOR YOUR SAFETY NF Y HE 4 AKI RE 5 PACKAGE CONTENTS Ga GR ee eevee 5 PHONE SPECIFICATION M 5 HANDSET DESCRIPTION emt 6 KEY PAD DEFINE AND TEXT ENTRY anos essdorer n ert Pra te pev Hetero p e Pix bU vro erghe vo oua YE daet XE PUE tin amends 7 WRITE TEXT et 7 CGHARGE BATTERY RE 8 POWER ON OFF d 8 KEYPAD LOCK MENCEMEDNMDCC 8 QE Dice 9 LUE P PRUe i uguD coe 9 A SEARCH AVAILABLE WLAN E Dn OD nnn nno 9 B CONNECTWDLAN EF Y HYR Y RF NR NF Y HF HF Y FR Y 10 C SIP SERVER REGISTER
5. Ring or listening volume is set to maximum When flashlight is used frequently Sometimes the matching between the phones and AP can influence the standby time 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan G6 IO Power Technology Co Ltd http www io power com e mail 10 power 10 power com tw Tel 886 3 5429395 Fax 886 3 5357297 Handset Description V Ai FT Vf 2asc f3per le G co an z v J J nnr M 5 ae r E Zxoxs LR Tez j G JCo ILO NE a Key Function Left soft Key Select done Right soft key Back clear exit Answer key Answer dial End key Reject end back power on power off Up Up increase Down Down decrease Left Before decrease Right Next increase OK Same to the left soft key Number key 1 Number 1 and symbols in common use 2 1 Number key 2 Number 2 and characters ABC Number key 3 Number 3 and characters DEF Number key 4 Number 4 and characters GHI Number key 5 Number 5 and characters JKL Number key 6 Number 6 and characters MNO Form No IOP OAPA 001 001 6 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail io power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 Number key 7 Number 7 and
6. selected AP was shown at the searched AP list We take the type of WEP OPEN for example here you can set other types by following the indication Form No IOP OAPA 001 001 9 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail 10 power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 B Connect WLAN 1 Set the SSID name WIFIAP first the default name is the one you have just selected the name is consistent to AP currently press left soft key or OK key to enter change menu Enter SSID WIFIAP 2 Select Security Type gt WEP OPEN WEP Key index WEP Key 1 press left soft key or OK key and enter the WEP OPEN menu again If the security type is Open go to Step 3 directly Select Key Pass Passphrase Hex Key press left soft key or OK key enter the Enter key Hex mode key of the SSID is the one of the AP you have just selected then press the left soft key or OK key enter change menu again Enter passphrase Enter hex key WIFIAP or WIFIAP 3 Select IP setting gt use DHCP If the WLAN you selected support DHCP server press left soft key or OK key to enter change menu again You can also select static IP follow the indications and enter the IP address net mask gateway DNS address in turn And back to change menu after setting 4 The functions of configuration item Options menu are as follows U
7. through icon color online users are orange icon offline users are gray icon when there are two or more members in one group the group is online When the cursor stays on a certain contact or a group press the left function key to select Options menu enter the following menu list Logout List Update PTT Contact PTT Group PTT Setup Logout operation will quit PTT server and the PTT icon disappears List Update operation will update the current group contact list PTT Contact will enter the following menu when the cursor stays on a certain contact in a contact list the following menu will be available Edit Contact View more info Add Contact Delete Contact PTT group will enter the following menu when the cursor stays on a certain group in the PTT Form No IOP OAPA 001 001 17 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail io power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 contact the following menu will be available Edit Group View more info Add Group Delete Group View Member Add Member Delete Member Call After PTT server registration is completed at the standby interface or PTT contact interface press and holds the side PTT key to initiate PTT call after the ring stops you can send the voice message through microphone when call is over release the PTT key t
8. when you start to upgrade the system will connect to it automatically Firmware Upgrade Select Menu gt Setting gt Firmware Upgrade the system will check for the new files and upgrade automatically Erase All Select Menu gt Setting gt Erase All this function will erase all of the user settings to reset all settings to their default values Password Setup Select Menu gt Setting gt Password Setup users can change the password here according to the operation tips Form No IOP OAPA 001 001 20 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan nttp www io power com e mail io power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 Status Summary WiFi Phone provides user shortcut to look over the settings there will be a detail list after you setup your phone VOIP Status WLAN Status AP Channel Signal Strength Storage Status Battery Display Phone Number MAC Address Firmware Version Server Information Note You can only look over the information here if you want to change your settings go back to the setting menu Form No IOP OAPA 001 001 21 22 Retention date 6Years G6 IO Power Technology Co Ltd http www io power com 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan e mail 10 power i0 power com tw Tel 886 3 5429395 Fax 886 3 5357297 Basic Trouble Shooting QUESTION RECOMMENDED
9. 2 Add list gt 3 Send message gt 4 rename list gt 5 Delete list 1 Can store up to seven group lists and each group list can store 20 users 2 Can add group list user from the phone book directly Note Before you send messages be sure the SIP server you have used support this function Please contact the operator for detailed information PTT Login Enter the PTT function from main menu press the left function key to select Options enter the following menu list Login List update PTT contact Form No IOP OAPA 001 001 16 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan nttp www io power com e mail io power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 PTT group PTT setup Select PTT setup enter the following menu list User setup Server setup Speaker setup Auto login Enter user ID and password in the User setup menu enter the server address and port number default port is 5058 in the Server Setup complete the setup and exit PTT setup menu and return to the Options menu select login to register the screen will be prompted Registering Once the phone is registered successfully the PTT icon will appear on the screen then you can make the PTT call Use Return to the PTT contact interface Contacts are listed alphabetically according to contact name distinguish the offline users and online users
10. 2 transfer the current call to the user number 8003 At this time 8001 and 8003 establish a new call and then 8002 withdraw the current call Call Transfer call state gt left soft key gt Call Options gt 3 Transfer gt 3 Dial Call Or call from the phone book New Call New Call is that the users on a call can make a third party call the initial call will be automatically held when the new call begins the original call is in silent model When the new call hangs up after the caller release hold the original call can be restored New Call call state gt left soft key gt Call Options gt 4 New Call or call from the phone book Restore the original call gt right soft key directly release hold or click the left soft key gt 1 Unhold For example 8001 and 8002 in the call 8002 launch a new call to a third party user 8003 At this time 8002 and 8003 establish a new call the call between 8001 and 8002 is on hold either 8002 or 8003 can hang up the new call after 8002 release hold 8001 still can talk with 8002 Note Hold Mute Transfer New Call function do not distinguish the calling party and the called all parties can achieve above functions Shortcut key for speaker During the call you can turn on and turn off the speaker by the navigation OK key directly SOS Alarm 1 This function must cooperate with the server Users can alarm to the server and then the server will locate the user and take emergency measur
11. 57297 Flashlight The flashlight key is on the right side of the WIFI phone Press the key flashlight is turned on Release the key flashlight is turned off WLAN and VOIP Setting This product support IEEE802 11b g and SIP protocol the default setting is without SIP information you should get the SIP name password and domain from operator first For example the information of the WLAN you are going to use is SSID WIFIAP Security type WEP open Password Text WIFI or Hex key 1016A386E The information of the SIP server you are going to use is SIP server domain 31 108 26 51 User name SIP phone number 123456 SIP phone number 123456 Phone number could be the same to user name or not that due to the setting of SIP server Password 1234 The detailed settings are as follows A Search Available WLAN 1 At standby mode press the left soft key or OK key to enter the main menu The default initial password 000000 2 Select Settings gt WLAN setup select one from the default 1 8 AP in WLAN setup these eight factory default configurations are empty the default display is Default list No 3 After entering the Options menu first select WLAN Search After searching there will be a list to show you the available AP with security type and signal strength Select the one with highest strength if this AP is permitted to use press left soft key or OK key to setting Note The security type of the
12. ACTION Why can t switch on N Check if the battery is inserted correctly Check if the battery is running out of power Connect the handset to PC or voltage Why is there no signal N Check if there is any available AP Check if AP is setting correctly Check if AP settings SSID WEP key of WLAN are correctly Why is nothing displayed on the LCD screen Check if battery is running out of power Why can t I make a call Make sure you have registered the SIP server correctly Make sure you have setup the WLAN correctly Make sure the number you dialed is available Why isn t my firmware upgrading k l CM N N If the version of your handset is the latest it won t update again Check if the upgrading address is correct Why can t roam Your handset can roam only between the APs with same SSID name and password if not you have to set it up again Form No IOP OAPA 001 001 22 22 Retention date 6Years
13. HR iis 11 DIBLJANSWER CALL 12 c PP pls RE SEKS 13 se RR REN HR 14 MENU FUNCTION EU I 15 Form No IOP OAPA 001 001 2 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail 10 power i0 power com tw Tel 886 3 5429395 Fax 886 3 5357297 eld CY FRY HN HY RR NN A HYNN HN HE NN RHEN AN FRI WRN HN HNN A NN E E 15 MESSAGE A E AIE esseveeessocse GRO ceedesos ASE E E E E FOU DF ddd ONN Y ANF NU SGAN UN OY U USA SO 16 Lad UN ANY EHO 16 e n TE Ee A Hn 19 SETTING AEE HY RIN E A NN EAE S A HRN FN A EEES A HR 19 STATUS SUMMARY GW OO O k Oh HE A 21 BASIC TROUBLE SHOOTING iin iris TI Y YR NYFED ORSWWA YN LE EFE ESSE DAFAD ME PINTA PAY IE RYE PESE DOR PU AFF FN En 22 Form No IOP OAPA 001 001 3 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan mue few IO power com e mail io power io power com tw Tel 886 3 5429395 Fax 4886 3 5357297 For your safety Read these simple guidelines Not following them may be dangerous or illegal Read the complete user guide for further information
14. characters PORS Number key 8 Number 8 and characters TUV Number key 9 Number 9 and characters WXYZ Number key 0 Number 0 and for blank Symbol Symbol symbols Symbol Symbol shift input PTT key PTT call SOS key top One key alarm key Flashlight Key Flashlight On Off Key Pad Define and Text Entry Text Mode Text Mode Normal ABC Numeric 0 9 Normal ABC Numeric 0 9 1 Tes pqrsPQRS 7 JdefDEF JlwxyzWXYZ 9 0 _ amp Write Text The number keys are not labeled all the letters that they can input Letters that can be input refer to the language you select This phone support English and Simple Chinese input English Press the number keys 1 to 9 continuously until the right character appear Press the key that character is labeled once for the first character twice for the second so on and so forth Form No IOP OAPA 001 001 7 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan nttp www io power com e mail io power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 e If the letter you want is at the same key with the before letter you can press the left or right key then enter the new letter Press the key of number 1 you can input some inter punitions you frequently use Select clear to delete the character befo
15. cting to any other device read its user guide for detailed safety instructions Do not connect incompatible products Form No IOP OAPA 001 001 4 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan nttp www io power com e mail io power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 Start Please read the manual before installing and using this product Package Contents WiFi phone Charger USB cable x1 x1 x1 User Manual CD x1 Phone Specification Dimension 121 8 57 8 28 7 mm Weight 168g including battery Battery Rechargeable Lithium Manganese battery PL123450 3 7V 1500mAh removable Adapter Input AC 100 240V output DC 5V 1A Protocol SIP v2 RFC3261 STUN RTP LCD Color LCD 1 8 128 160 NOTE The standby time depends on the network conditions phone usage and surrounding area The phone consumes more battery power under the following conditions 1 In areas with weak signals with high or low temperatures or when used outside the service coverage area o N O Oo A O DN Form No IOP OAPA 001 001 5 22 Retention date 6Years When the phone frequently searches for network signal due to location changes When users talk on the phone for long periods of time 3hrs When users send and receive messages frequently The Alarm Backlight or Vibration function is active
16. es 2 Once press SOS key on the top of the phone in any interface the phone starts to alarm during this period users can continue to operate other functions the SOS alarm status can be displayed in standby interface 3 Please press the SOS key again to cancel alarm SOS number configuration Settings gt Phone Settings gt 8 SOS settings Form No IOP OAPA 001 001 13 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http Www io power com e mail io power21o power com tw Tel 886 3 5429395 Fax 886 3 5357297 SOS server settings SOS number settings Note Before using SOS function please make sure the server your phone is registered in can support the SOS function Please contact the server operator for detailed information P2P On standby interface press combination keys 0000 into P2P dial interface Enter P2P numbers finished with clicking OK Enter P2P IP address finished with clicking OK Comes to the start P2P dial prompt click OK then a P2P call begins Note 1 For P2P calls all WiFi phones need to register on an AP or an AP under the same subnet and automatically or manually obtain the IP address 2 To make P2P calls the VOIP numbers and SIP server address of the caller and the called cannot be empty but can random fill in the information 3 During P2P calls you cannot answer the VOIP calls 4 When
17. lick dial key to recall the recent phone number 2 Press the Answer key to call the number you can press the up down key or left right key to set the volume of the speaker and microphone 3 Press Answer key to answer a call to reject a call press the End key Call Hold Call Hold is that users on a call can temporarily interrupt the original call after call hold the phone is in silent mode To restore the original call the user just needs to release the call hold function Hold Call status gt left soft key gt Call Options gt 1 Hold Unhold right soft key can release hold directly or click the left soft key gt 1 Unhold Call Mute Call Mute is that the user which selects Call Mute can only receive but not call Mute Call status gt left soft key gt Call Options gt 2 Mute Unmute right soft key can release mute directly or click the left soft key gt 2 Unmute Call Transfer Call Transfer is that the users on a call can transfer the current call to the online users on third party server platform the transfer user withdraws the current call and the remaining one Form No IOP OAPA 001 001 12 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail 10 power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 establishes a new call with the third party For example 8001 and 8002 in the call state 800
18. o end the call up and down key can adjust the volume of the PTT call On the standby interface press the PTT key the phone will initiate PTT call to default group On the PTT contact interface when the cursor stays on the pre built group or personal contacts press the PTT key to initiate the PTT call to this object After PTT call for pre built group is over any member of this pre built group can initiate PTT callback in the effective time Notes 1 Sharing group is the fixed group set by the server the end user cannot change it The sharing group is top listed in the group list by default 2 Pre built group need to be defined in the members of sharing group by WiFi phone terminal 3 The Options menu of sharing group only has the following menus View group member View more info Add group 4 During the answering period it cannot receive PTT calls PTT functionality requires server support please contact the server operator for detailed information Form No IOP OAPA 001 001 18 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail 10 power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 Utilities Stop watch Select Menu gt Utilities gt Stop Watch press left soft key to active the stop watch and start to time Calculator Select Menu gt Utilities gt Calculator Press keys 0 to 9 to insert digits and
19. re the cursor Select to switch the input method Charge Battery 1 This WiFi Phone has a built in non removable lithium cobalt battery or a built in non removable lithium manganese battery Please check if there is spare capacity in the battery the first time you use the phone If you cannot boot the phone or the phone display low power consumption after booting please recharge it before using 2 Connecting the charge base to the power supply open the charging column protection cover at the bottom of the phone then insert the charge column to the charge base to start charging 3 After that the battery indication will start to roll while charging when the phone finish charge the indication will stop rolling please pull out the adapter to use Power On Off Power On Press the End key for 2 seconds the phone start to respond and power on You need to setup the phone first if you have finished setting the phone will search for the set WLAN automatically Power Off Press the End key for 2 seconds the phone will start to respond and power off Keypad Lock Active at standby mode press key first and then key Unlock press the key first and then key Form No IOP OAPA 001 001 8 22 Retention date 6Years G6 10 Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail 10 power io power com tw Tel 886 3 5429395 Fax 886 3 53
20. se use the configuration item Change set the configuration item Rename rename the configuration item Search search an AP for the configuration item WPS connect the configuration item in WPS Reconnect reconnect the AP under the configuration item Form No IOP OAPA 001 001 10 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail 10 power io power com tw Tel 886 3 5429395 Fax 886 3 5357297 C SIP Server Register 1 WiFi phone number setting You should get SIP phone number SIP user name password and SIP server domain from operator first Select VOIP Settings select one from the default 1 8 AP in WLAN setup then enter the Options menu select Change menu to set configuration item Select VOIP identify gt Phone number input SIP phone number 123456 then press left soft key or OK key to enter the VOIP identify menu again Enter phone no 123456 Select VOIP setting gt change gt VOIP identify gt SIP domain press left soft key or OK key input SIP server address press left soft key or OK key and enter the VOIP change menu again 2 SIP domain setting Enter domain 31 108 26 51 Select VOIP authentication gt SIP user name password then press left soft key or OK key and enter the VOIP change menu 3 SIP server authentication Enter user name Enter password 123456 And 1234 4 SIP Ser
21. to insert a decimal point Press to select algorithm and left soft key to get result Note This calculator has limited accuracy and is designed for simple calculations Calendar Select Menu gt Utilities gt Calendar press up down right left key to look over Setting In this feature you can change the phone s various settings In order to prevent other people changing the user s settings please input your password to enter the settings menu The initial password is 000000 you can change this password in the Password Settings menu Phone Setup Volume Setting Select Menu gt Setting gt Phone Setup gt Volume Setting you can set the volume of receiver speaker ring keypad Prompt Mode Select Menu gt Setting gt Phone Setup gt Prompt Mode you can select special ring or set the phone to vibrate mode or ring vibrate mode when you receive a call Screen Keys Select Menu gt Setting gt Phone Setup gt Screen Keys you can set contrast backlight key repeat key click volume here Speakerphone Select Menu gt Setting gt Phone Setup gt Speakerphone you can set it on or off Language Select Menu gt Setting gt Phone Setup gt Language to select the menu language you want including English and Chinese Edit Greeting Select Menu gt Setting gt Phone Setup gt Edit Greeting you can edit greeting for your phone Form No IOP OAPA 001 001 19 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist
22. ver Setting Select VOIP server gt SIP server address SIP proxy address press left soft key or OK key and enter the VOIP change menu Enter SIP server address 51 108 26 31 5 After VOIP Information is setup return to VOIP Setup menu press the left soft key or OK key to enter the configuration item select Use then the configuration item will be taken effect 6 The functions of configuration item Options menu are as follows Use use the configuration item Change set the configuration item Rename rename the configuration item Form No IOP OAPA 001 001 11 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail 10 power 10 power com tw Tel 886 3 5429395 Fax 886 3 5357297 Note 1 STUN protocol is set in SIP server currently you need not to set in your handset again If the SIP you registered does not support STUN you can search for it on internet and set in your handset 2 The port number of VOIP protocol is default you need not to set in your handset again except your operator provides you another one To set it enter the symbol after the SIP sever address and then input the port number Enter SIP server address 31 108 26 51 5060 3 This edition does not support voice mail now Dial Answer Call 1 Enter the integrity number or you can search the number from the phonebook or simply c
23. you choose Static IP please set the gateway address Form No IOP OAPA 001 001 14 22 Retention date 6Years G6 IO Power Technology Co Ltd 1F No 100 Jinzhu Rd North Dist Hsinchu City 30055 Taiwan http www io power com e mail io power 0io power com tw Tel 886 3 5429395 Fax 886 3 5357297 Menu Function You can press left soft Key to enter the main menu at standby mode and then choose the function you want Press right key back you will back to the higher level menu Press the End key you will back to the standby mode Not all menu functions or option items are described here Call Phonebook Select Menu gt Call gt Phonebook You can save names and phone numbers in the phone memory The internal contact list can store up to 200 names You can also use the following options in the Phonebook menu Phone numbers classify the number and store Special ring selects the special ring for the entry Edit name edit name for the entry Delete entry delete entry from phonebook Find name and number from phonebook 1 Scroll down in the standby mode select Menu gt Call gt Phonebook gt Find Add name 2 Enter the first letters of the name Scroll to the name that you want You can press to switch the input method Dial Select Menu gt Call gt Dial you can enter the number you want and call it then Recent Calls Select Menu gt Call gt Recent calls The phone logs 10 phone numbers each of missed
Download Pdf Manuals
Related Search