TOPCAT - Lightspeed Technologies, Inc.
Contents
1. 5 Warranty Safety amp Specifications 3 3 Optional 2 Daily Operation Accossor s 4 Troubleshooting 1 Overview 18 5 AUDIO INTEGRATION The Media Connector is designed to integrate multiple audio sources quickly and easily Video In TOPCAT G IR Transmission Y Audio Out VGA Out Teacher s REDMIKE VC Video Out Audio Out Audio In Audio In Audio In Audio Out 6 TIPS TO OBTAIN OPTIMUM AUDIO PERFORMANCE Speak in a natural voice A normal conversational speech level will provide an adequate signal It is not necessary to increase the intensity of your voice the audio system provides adequate amplification approximately 5 10 dB above ambient room noises e Avoid wearing jewelry that may rub or bump against the microphone Turn the REDMIKE VC off during private conversations with a student parent or other classroom visitor You can also cover the LED lens on top of the REDMIKE VC to block the signal Recharge microphone s each night When recharged nightly the microphone will last through a typical school day 5 Warranty Safety 4 Troubleshooting 2 Daily Operation 1 Overview amp Specifications 3 Optional Accessories 19 4 Troubleshooting 3 Optional Accessories 2 Daily Operation 1 Overview 20 SECTION 3 OPTIONAL ACC2. lightspeed L ropcaT PCAT Classroom Audio System a ML User Manusi IMPORTANT SAFETY INSTRUCTIONS M E o Read these instructions 12 Keep these instructions Heed all warnings Follow all instructions Do not use the apparatus near water Clean only with dry cloth Do not block any ventilation openings Install in accordance with the manufacturer s instructions 14 Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a 15 third grounding prong The wide blade or the third prong is provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet 17 Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and 18 the point where they exit from the apparatus Only use attachments accessories specified by the manufacturer 13 16 Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart ap
3. AUDIO AUDIO AUDIO AUDIO AUDIO 1 2 3 4 N VOLUME 0000 c 1 POWER CABLE INPUT Plug the power supply 5V 1 0A into this jack 2 FOUR AUDIO INPUTS Connect standard audio devices to any of the 3 5mm stereo inputs A provided cable allows connectivity to RCA stereo outputs common on DVD players and televisions 3 VOLUME CONTROL Controls the output volume of the media connector MEDIA CONNECTOR CONTROLS AND CONNECTIONS cowvr D O00 1 SYSTEM POWER SWITCH System power is turned on or off with this pushbutton When power is on the blue power LED lights REGISTRATION PUSHBUTTON Pushing the registration button in conjunction with the registration button on the TOPCAT module will cause the two modules to synchronize as an operating system Refer to the Registration Procedure in this manual ALD AUDIO OUTPUT 3 5mm stereo jack sends audio signal to external equipment such as a recorder or an assistive listening device like Lightspeed s 370 Personal FM System lightspeed ALD AUDIO VOLUME CONTROL Adjusts the audio signal level output through the ALD audio output connector RF LINK LED This LED is lit anytime the RF link is established between Media Connector and the TOPCAT This LED will glow green while the system modules remain linked REGISTRATION LED The amber LED blinks when a link is being established The
4. This product is manufactured using lead free processes and is free of other materials harmful to the environment It conforms to the most stringent new European guidelines for consumer products RoHS This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including C interference that may cause undesired operation Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This equipment has been tested and found to comply with the limits of a Class B Digital Device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instruction may cause harmful interference to radio communication However there is no guarantee that interference will not occur in a particular installation However there is no guarantee that interference will not occur in a particular installation If this equipment does cause interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of
5. is on e Confirm signal is being received at the ISR on the TOPCAT The IR signal light will be red green for channel B indicating a signal is being received Confirm that REDMIKE VC is turned on There will be a blue LED on the microphone to indicate itis powered on PROBLEM drop out SOLUTION follow these steps to eliminate drop out Ensure that TOPCAT is not installed too close to ceiling light fixtures e fusing PageFirst feature decrease sensitivity to approximately 8 00 If you review these instructions and still have questions write down the serial number and model number of your system and call Lightspeed Technical Services at 800 732 8999 5 a m 5 p m PST Customers outside of the U S should contact their local reseller 4 Troubleshooting ration 2 Daily Ope 1 Overview 25 5 Warranty Safety amp Specifications 26 3 Optional Accessories 2 Daily Operation 4 Troubleshooting 1 Overview TOPCAT AND MEDIA CONNECTOR REGISTRATION The TOPCAT and Media Connector must be registered or synchronized with each other before they will operate together These components come pre registered from the factory On occasion one of these modules may be replaced so the registration process will be needed Use the following table to determine if your TOPCAT and Media Connector are registered OFF All LEDs Off Turn MC Power on Blue LED is LIT ON
6. 4 Tro o Daily Operation Accessoris Troubleshooting 1 Overview SYSTEM COMPONENTS Equipment which may be part of your TOPCAT Standard Components U S and Canada TG TOPCAT all in one ceiling mount system 24V 2 5 NA 24V 2 5A power supply for TOPCAT RMV REDMIKE VC microphone with battery NH2A27 AA NiMH rechargeable sensing battery for REDMIKE AC RMLC2 REDMIKE lavaliere cord RMCC REDMIKE cradle charger 5V 1 0 NA 5V 1 0A power supply MC Media Connector with power supply MSC3535 3 5mm to 3 5mm stereo audio cable CA AD RCA2 35 Dual RCA jack 3 5mm stereo plug adapter Standard Components Outside U S and Canada TC 1881 TOPCAT all in one ceiling mount system 24v 2 5 24V 2 5A power supply for TOPCAT specify country RMV REDMIKE VC microphone with battery NH2A27 AA NiMH rechargeable sensing battery for REDMIKE AC RMLC2 REDMIKE lavaliere cord RMCC INT REDMIKE cradle charger universal plug attachments 5V 1 0 INT 5V 1 0A power supply universal plug attachments MC 1881 Media Connector with power supply MSC3535 3 5mm to 3 5mm stereo audio cable CA AD RCA2 35 Dual RCA jack 3 5mm stereo plug adapter Optional Accessories RMS REDMIKE Share handheld microphone w battery pack NH2APK AA Rechargeable battery REDMIKE Share TK250M Noise canceling headset microphone TCC7 Charging cable for REDMIKE Share RCA6 6 dual R
7. Blinking Green Not Linked Needs to be Unregistered registered Linked to TOPCAT NOTE If the link LED on the Media Connector is continuous green the following procedure does not need to be done To register TOPCAT with its Media Connector 1 Locate the registration buttons on the TOPCAT and Media Connector TOPCAT Registration Buttons Media Connector 2 Start the procedure by pushing NOTE If after pushing the the registration button on the TOPCAT An amber LED will light You will have 20 seconds to push the corresponding registration button on the Media Connector Push the registration button on the Media Connector The amber LED will begin to blink When registration is complete the link LED will glow green and the amber LED will go off Registration button on TOPCAT the corresponding button on the Media Connector is not pushed within 20 sec the amber LED will go from a slow blinking to a fast blinking This means the registration process has timed out Wait until the amber LED stops blinking to start the registration again SETUP AND OPERATION OF THE REDMIKE VC AND TOPCAT Once the REDMIKE is charged follow these steps to set it up for use NOTE This procedure is easier with two people 5 Warranty Safety amp Specifications Turn the TOPCAT power on The blue LED on the Media Connector will g
8. de fr quence radio et s il n est pas install et utilis conform ment aux instructions peut causer des interf rences nuisibles aux communications radio Toutefois rien ne garantit l absence d interf rences dans une installation particuli re Toutefois rien ne garantit l absence d interf rences dans une installation particuli re Si cet quipement provoque des interf rences avec la r ception radio ou t l vision ce qui peut tre d termin en teignant et en rallumant l quipement il est recommand l utilisateur d essayer de corriger les interf rences par l un des moyens suivants Enr orientant ou en r installant l antenne de r ception En augmentant la distance entre l quipement et le r cepteur Enbranchant l quipement un circuit autre que celui o le r cepteur est branch Encontactant le revendeur ou un technicien exp riment en radio t l vision Attention afin d assurer la conformit aux exigences de la FCC en mati re d exposition aux RF placez le Media Connector et le TOPCAT une distance de 20 cm minimum des personnes les plus proches DECLARATION OF CONFORMITY ACCORDING TO EC LVD DIRECTIVE 2006 42 EC Manufacturer Lightspeed Technologies Inc Address 11509 SW Herman Rd Tualatin Oregon 97062 We Herewith declare that the following system complies with the appropriate basic safety and health requirements of the Directive based on its design and type as brought into circulat
9. registration LED goes out and the link LED is solid green when the link is established POWER LED This LED glows blue when the system is powered on 2 Daily Operation 1 Overview 11 12 ly Operation 2 Dail 1 Overview POWER MUTE BUTTON POWER LOW BATTERY INDICATOR A blue light indicates the REDMIKE VC is on and fully charged A red light indicates a charge is needed BATTERY COMPARTMENT To open slide the door downward The battery should only be replaced by a Lightspeed AA rechargeable sensing battery part NH2A27 YELLOW PROTECTIVE TAB Slide the battery compartment door and remove this disposable protective tab before use AUDIO MICROPHONE INPUT Use this input to plug in a laptop MP3 player or other audio REDMIKE VC Volume Control CONTROLS AND CONNECTIONS 8 source to wirelessly transmit audio to be played through the system Alternatively an external microphone can be connected CHANNEL SELECT SWITCH CH A B Use this to choose channel A or B If you are using a single microphone we recommend using channel A VOLUME CONTROLS UP DOWN CHARGER CONTACTS These contacts interface with the charging tabs when the REDMIKE VC is placed in the RMCC cradle charger CRADLE CHARGER CONTROLS AND CONNECTIONS o z 2 Daily Operation 1 Overview 1 CHARGE INDICATORS The light 2 DC POWER P
10. the following measures Reorientor relocate the receiving antenna e Increase the separation between the equipment and the receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Caution To maintain the compliance with the FCC s RF exposure guideline place Media Connector amp TOPCAT at least 20 cm from nearby persons 5 Warranty Safety amp Specifications E Ho o 4 o Q O gt a N 1 Overview 29 o 2 w n 2g E S 3 i amp Specifications 30 E o E o iew 1 Ove PR CAUTIONS DE S CURIT ET CERTIFICATIONS ATTENTION RISOUE D LECTROCUTION NE PAS OUVRIR CONFORM MENT AUX NORMES D INSTALLATION APPLICABLES CE PRODUIT DOIT TRE INSTALL PAR UNE PERSONNE FAMILIARI S E AVEC LA CONCEPTION ET LE FONCTIONNEMENT DU PRODUIT ET CONSCIENTE DES RISQUES ENCOURUS UTILISEZ UNIQUEMENT LA BATTERIE LIGHTSPEED FOURNIE CERTIFICATIONS Ce produit est certifi conforme aux normes et aux exigences UL en mati re de s curit lectrique par Underwriters US Laboratories Inc LISTED Ce produit est conforme aux principales exigences des directives de l Union Europ enne suivantes 89 336 CEE 92 31 CEE 93 68 DEE et 2004 108 CE relatives la compatibilit lectromagn tique Lightspeed Technol
11. CA audio cable RCA24 24 dual RCA audio cable MMC2535 Audio patch cable 2 5 mm mono to 3 5 mm mono DCPEX __ 50 plenum rated DC Power cable kit specify country TOPCAT SIDE PANEL CONTROLS AND CONNECTIONS 1 CH A VOLUME Controls the volume level for microphone set to channel A It is preset at the factory to its 11 o clock position Turn clockwise to increase volume SIDE VIEW or counter clockwise to decrease volume 2 CH B VOLUME Controls the volume level for microphone set to channel B It is preset at the factory to its 11 o clock position Turn clockwise to increase volume or counter clockwise to decrease volume 3 AUX POWER INPUT CONNECTOR OPTIONAL For use during installations where AC power is not available in the ceiling Accepts 24VDC 2 5A connector from an external power supply 4 PAGEFIRST INPUT AND ADJUST Connect the input from optional PageFirst sensor when interfacing with the building s paging system Use the ADJ control to adjust the sensitivity if needed 5 REGISTRATION BUTTON This button is used to synchronize the TOPCAT with the Media Connector 5 Warranty Safety amp Specifications ional Options 4 Troubleshooting Accessories 2 Daily Operation 1 Overview 5 Warranty Safety amp Specifications 2 y 3 Optional Accessories 2 Daily Operation 1 Overview 10 MEDIA CONNECTOR CONTROLS AND CONNECTIONS
12. ESSORIES REDMIKE SHARE CONTROLS AND CONNECTIONS O 1 POWER SWITCH slide switch up for on and down for off 2 POWER CHARGE INDICATOR audio signal to be played through the system 4 CHANNEL SELECT SWITCH this light glows blue when turned on and turns off to indicate low battery level When charging the light glows red 3 AUDIO INPUT plug a laptop MP3 player or other audio device into this jack to wirelessly transmit the CH A B Located in the battery compartment this switch is set to channel B at the factory 5 CHARGER INPUT Plug the charging cable from the REDMIKE cradle charger into this jack REDMIKE SHARE CHARGING Before use the REDMIKE Share should be charged It will take 8 10 hours for the REDMIKE Share to obtain a full charge A fully charged REDMIKE Share will last for over 7 hours of use If the microphone is used daily it should be kept plugged into the charging cradle REDMIKE Share can be left connected to a cradle charger for up two weeks without causing degradation to battery life 1 Ensure that the REDMIKE Share is 4 The LED on the microphone will turned off glow red to indicate charging 2 Make sure the cradle charger 5 Leave the REDMIKE Share is plugged into a wall outlet plugged in overnight 8 10 hours Connect one end of the charging to obtain a full charge bebo MIS celda 6 When charging is complete the ql CHARGER on the bottom of
13. ICATIONS FIVE YEAR LIMITED WARRANTY 5 Warranty Safety amp Specifications 4 Troubleshooting Lightspeed Classroom Audio Systems are guaranteed against malfunction due to defects in materials and workmanship for a period of FIVE 5 YEARS beginning at the date of the purchase invoice If such malfunction occurs the product will be repaired or replaced at Lightspeed s option without charge during the warranty period Lightspeed s Warranty Exchange Program applies to all infrared systems within the five 5 year warranty period If an infrared product or component has an issue that requires service a refurbished replacement will immediately be sent to the customer to minimize downtime Customers will receive the exchange product s or component s within 2 3 days A prepaid return label will be included with exchanged products so original malfunctioned equipment can be returned to Lightspeed Any exchanged equipment will remain covered under the original five 5 year warranty 1 Warranty on infrared microphones is FIVE 5 YEARS 2 Warranty on Lightspeed NiMH rechargeable batteries is one 1 year 2 Daily Operation 3 Prepaid shipping label provided by Lightspeed for warranty repairs within the U S Customers outside the U S should contact their local reseller for warranty repair instructions 4 Warranty does not extend to finish appearance items or malfunctions due to abuse or operation other than specified cond
14. Improperly installing and or connecting power to the system may result in EQUIPMENT DAMAGE serious INJURY and or DEATH DO NOT INSTALL ALONE The ceiling enclosure weighs approximately 20 lbs 9 kg and requires at least two people to install DO NOT install alone USE SUITABLE LADDERS use proper ladders or support platforms when installing the TOPCAT enclosure DO NOT stand on chairs tables or other unsuitable surfaces SUPPORT THE CEILING ENCLOSURE PROPERLY DO NOT allow the full weight of the ceiling enclosure to rest on the tile grid of the ceiling The ceiling enclosure is designed to be suspended at TWO POINTS by suspension wires secured to rafters or other suitable building structure and to rest LIGHTLY on the tile grid TABLE OF CONTENTS SECTION 1 Overview SECTION 2 Daily Operation SECTION 3 Daily Operation SECTION 4 Troubleshooting SECTION 5 Warranty Safety amp Specifications 10 12 13 14 15 16 17 18 19 20 21 22 22 23 24 25 26 27 28 29 30 31 32 Important Safety Instructions System Components and Unpacking Optional Components Controls amp Connections TOPCAT Side Panel Media Connector REDMIKE VC Cradle Charger 1 Turn the System On 2 Operating the REDMIKE VC 3 Charging the REDMIKE VC 4 Using the Media Connector 5 Audio Integration 6 Tips to Obtain Optimum Audio Performance REDMIKE Share Controls amp Connectios Charging Initial Set up
15. ORT Connect the glows red while the REDMIKE is DC power cord here charging When fully charged the 3 OPTIONAL CHARGING PORT light will glow green A blinking Plug the charging cord for red light indicates that no battery the optional REDMIKE Share is sensed REDMIKE Yellow Protective Tab may not have been completely removed see page 12 item 4 A blinking green LED means a non Lightspeed battery has been installed possibly an alkaline battery microphone here 13 3 Optional 5 We ty Safet P is 4 Troubleshooting arany hi id Accessories E amp Specifications 2 Daily Operation Overview 1 14 SECTION 2 DAILY OPERATION c P DA di TOPCAT m A m i SE EUM Projector kk REDMIKE VC i D Media EN Connector i Laptop DVD Playe 1 TURN THE SYSTEM ON Press the POWER button on the Media Connector The blue LED will glow NOTE since the TOPCAT is mounted in the ceiling the Media Connector is used to remotely power the system on and off lt Sliqhtspeed 2 OPERATING THE REDMIKE VC 1 Ensure the REDMIKE VC is fully charged The charger LED will glow green 2 Remove the REDMIKE VC from the cradle charger and turn it on 3 Slip the REDMIKE VC with lanyard around the neck and position the top of the microphone just below the collarbone NOTE Positioning of the REDMIKE VC is critical for proper volume adjus
16. PageFirst Interface Amplifying External Audio Equipment Output to Assistive Listening Device ALD Common Problems and Solutions TOPCAT and Media Connector Registration Set up and Operation of the REDMIKE VC and TOPCAT Five Year Limited Warranty Safety Warnings amp Certifications Pr cautions de S curit et Certifications Declarations of Conformity System Specifications 3 Optional 5 We ty Safet P bi s 4 Troubleshooting arany hi id Accessories E amp Specifications 2 Daily Operation 1 Overview SECTION 1 OVERVIEW SYSTEM COMPONENTS AND UNPACKING The standard configuration of the TOPCAT will contain TOPCAT Media Connector and Power Supply Cradle Charger and Power Supply REDMIKE VC Volume Control Microphone SYSTEM COMPONENTS AND UNPACKING CONT D Audio Cable Kit Hardware for optional wall mounting of Media Connector and ISR OPTIONAL COMPONENTS Optional equipment which may be part of your TOPCAT system REDMIKE Share nr d Handheld Mic amp Charger Cable DC Extension Cable 5 Warranty Safety amp Specifications 4 Troubleshooting 3 Optional Accessories 2 Daily Operation 1 Overview 5 Warranty Safety amp Specifications 3 Optional 2 Dail
17. R INTEGRATED SENSOR RECEIVER ISR Power From TOPCAT Reception Coverage Rooms up to 1200 sq ft 110 m ceiling 12ft 3 66 or less Mounting Integrated on TOPCAT ceiling clip wall bracket Receiving Diodes 32 5 Warranty Safety amp Specifications i i 3 Optional 2 Daily Operation Accsssofisn 4 Troubleshooting 1 Overview 33 lightspeed AC MNTC B LIGHTSPEED TECHNOLOGIES 11509 SW HERMAN ROAD TUALATIN OR 97062 TOLL FREE 800 732 8999 PHONE 503 684 5538 FAX 503 684 3197 LIGHTSPEED TEK COM MN0375US01 7
18. TOPCAT 3 As a page is broadcast the sensor clip detects the audio signal through induction and immediately mutes the TOPCAT 4 When the page is over the audio from the TOPCAT returns to normal volume level For full installation details refer to the TOPCAT Installation Guide USING THE REDMIKE VC TO AMPLIFY EXTERNAL AUDIO EQUIPMENT The REDMIKE VC includes a 3 5mm audio input jack to connect to an audio source like a laptop or MP3 player The REDMIKE VC will transmit the audio signal to be played through the system If your system includes two REDMIKE VCs we recommend using channel B student mike to amplify the external audio equipment so the teacher s volume on the channel A teacher mike does not have to be adjusted To determine which REDMIKE VC is set to channel B you can look at the label or switch on the back of the microphone 1 Adjust the volume of your laptop or MP3 device to about 25 of maximum 2 Plug your external audio equipment for example laptop into the input on the REDMIKE VC labeled INPUT using a 3 5mm patch cable AUDIO A INPUT 2 Adjust the volume of the REDMIKE VC or audio source to achieve desired loudness NOTE turning up the volume too high on the audio source can cause excessive distortion in the audio 5 Warranty Safety amp Specifications 3 Optional Accessories 2 E 5 Q O gt c a N 1 Overview 4 Troublesh
19. ery check Confirm the Power LED is blue Confirm batteries are charged each night Confirm proper batteries are used The REDMIKE VC requires the Lightspeed NH2A27 rechargeable sensing battery for proper charging The REDMIKE Share uses the NH2APK rechargeable battery pack Make sure the microphones are turned off while charging so a full charge is attained Full charge will last eight hours Inspect the battery contacts Clean and adjust if necessary PROBLEM hearing static SOLUTION follow these steps to eliminate static Ensure sensor is in optimum location refer to sensor placement in Installation Guide A single sensor will cover a 1600 sq ft 150 sq meters enclosed classroom with a ceiling height of 12 ft 3 5 m or less Ensure that no other REDMIKE VC REDMIKE Share is operating on the same channel Check the channel switch setting on the back of the REDMIKE VC or in the battery compartment of the REDMIKE Share PROBLEM low volume or feedback SOLUTION follow these steps to eliminate low volume or feedback Ensure microphone is positioned appropriately just below the collar bone e Check volume level on the REDMIKE VC If the volume is too high feedback will occur Adjust accordingly PROBLEM no sound from speaker SOLUTION Follow these steps to produce sound from speakers Turn the Media Connector on Confirm that the POWER light located on the top panel switch
20. hybrid speaker system with exciter technology sound panel and low frequency cone driver Panel Size 16 25 x 8 25 Frequency Response 60 Hz 18 kHz 10dB Impedance 4 Ohms Power Handling 20W RMS Power Input AC 100 240V 50 60Hz 1 5A DC 24V 2 5A Enclosure 24 x 24 x 4 plenum rated enclosure UL 2043 595mm x 595mm x 101 6mm Weight 22 lbs 10 kg RECEIVER TRANSMITTER SPECIFICATIONS Media Connector Module Frequency Response 80 Hz to 10 kHz 3 dB Signal to noise Ratio gt 70 dB Audio Distortion 196 Audio Inputs Four 4 3 5mm stereo jack Audio Outputs One 1 3 5mm stereo jack with volume control DC Power Input 5V 1 0 Amp 0 65mm coaxial barrel DC power jack Mounting Wall or table top Dimensions L x W x H 5 75 x 8 75 x 10 146mm x 222 3 x 254mm TRANSMITTER SPECIFICATIONS REDMIKE VC Audio Distortion lt 1 Built in Microphone Unidirectional Electret Battery Power 1 year warranty 1 AA NiMH rechargeable sensing battery Audio Input 3 5 mm x1 Dimensions W x D x H 0 9 x 1 0 x 3 5 22 86mm x 25 4mm x 88 9mm Weight 2 1 oz 59 53 g REDMIKE Share Audio Distortion lt 1 Built in Microphone Unidirectional electret Battery Power 1 year warranty 2 AA NiMH rechargeable battery pack Dimensions W x D x H 1 25 x 1 25 x 8 25 31 75mm x 31 75mm x 209 55mm Weight 7 36 oz 208 65 g SYSTEM SPECIFICATIONS conT D INFRARED SENSO
21. increase or decrease the sound level NORMALIZING AUDIO SOURCE VOLUME LEVELS Use the Media Connector as the master audio volume control for the classroom When two or more audio sources are connected you will need to normalize volume settings by setting all connected audio sources to the same sound level while leaving the Media Connector volume control set to its center setting The Media Connector is an audio mixer using a master volume control to adjust the volume of all audio sources at once Use the following procedure to set audio source volumes 1 Connect the multimedia audio sources to the Media Connector using the 3 5mm cables provided 2 Set the master volume control on the Media Connector to its center position 3 Turn on an audio source that does not have an accessible audio level control DVD VCR player 4 Adjust the Media Connector master volume control so the audio level playing through the speaker is appropriate for the classroom 5 Turn off the first audio source 6 Turn on the second audio source Use its volume control to balance the audio output to the same audio level played through the speaker as the first source 7 Repeat steps 5 and 6 for the remaining audio sources 8 Now the Media Connector s master volume can be used to increase or decrease the volume level for all audio sources as desired eshooting g 2 5 I o a O gt ei N 1 Overview 17
22. ion by us In case of alteration of the system not agreed upon by us this declaration will lose its validity Product TOPCAT SERIES Model Number s TopCAT TC1881 Media Connector MC1881 Conforms to the following EU Directives and the standards stated Low Voltage Directive 73 23 EEC and amendments UL IEC 60065 CB Certificate EMC Directives 89 336 EEC 92 31 EEC 93 68 EEC 2004 108 EC EN 55022 2006 A1 ETSI EN 301406V2 1 1 2009 07 ETSI EN 301 489 6 V1 3 1 2008 08 EN55024 1998 A1 2001 A2 2003 EN61000 3 amp 4 Generic Immunity Standard AS NZS CISPR 22 2009 Class A Radiated and Conducted Emissions from Audio Equipment Including EN 301 489 1 2008 EN 61000 3 3 2008 EN 61000 4 2 2001 1998 A1 A2 EN 61000 4 3 2002 1998 A1 A2 EN 61000 4 4 2008 EN 61000 4 5 2008 EN 61000 4 6 2008 EN 61000 4 8 2008 EN 61000 4 11 2008 The Technical Construction File is available to proper authorities and the product is CE marked LST Representatives je ed ESOS n Chabot Compliance Engineer Dave Squire VP of Engineering Date 5 Warranty Safety amp Specifications 4 Troubleshoo 2 Daily Operation 1 Overview 3 Optional Accessories 31 32 5 Warranty Safety amp Specifications 3 Optional Accessories 4 Troubleshooting 2 Daily Operation 1 Overview SYSTEM SPECIFICATIONS OVERALL SPECIFICATIONS TOPCAT Specifications Description Two way
23. itions nor does it extend to incidental or consequential damages Repair by other than Lightspeed or its authorized service agencies will void this guarantee Information on authorized service agencies is available from Lightspeed Technologies Inc 1 Overview Our Service Department 800 732 8999 5 a m 5 p m PST will handle all your repair replacement needs Customers outside the U S should contact their local reseller for service repair replacement needs 28 SAFETY WARNINGS AND CERTIFICATIONS CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED USE A LIGHTSPEED SUPPLIED BATTERY ONLY CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CERTIFICATIO C US This product is listed to UL standards and requirements for electrical safety by Underwriters Laboratories Inc LISTEN This product conforms with the essential requirements of the following European Union Directives 89 336 EEC 92 31 EEC 93 68 EED and 2004 108 EC Electromagnetic Compatibility Directives Lightspeed Technologies launched a formal product recycle program in Europe that complies with the European Union Directive 2002 96 EC on Waste Electrical and Electronic Equipment WEEE Directive Please visit our website at www Lightspeed tek com for contact information
24. low Remove the REDMIKE VC from the cradle charger and turn it on Slip the REDMIKE VC with lanyard around the neck and position the top of the microphone just below the collarbone NOTE Positioning of the REDMIKE VC is critical for proper volume adjustment Set the REDMIKE VC volume to its midpoint Push the up arrow button 9 times followed by pushing the down arrow button 4 times The REDMIKE VC is at its midpoint Use a flat blade screwdriver to slowly adjust the volume of the corresponding channel A or B on the TOPCAT so that the user can barely hear their own voice while speaking into the microphone Each REDMIKE VC has its channel pre set to either A or B as indicated on the back of the Mic REMEMBER This equipment supplements the user s voice so they are able to speak in a conversational tone Having the volume set too high will result in feedback and listener fatigue Once initial volume level is set walk around the room and listen for audio dropout and overall audio quality The teacher can now use the controls on the REDMIKE VC to adjust the volume level from anywhere in the room The microphone volume control has 4 steps up and 4 steps down from the mid point 9 levels total If a second REDMIKE VC was purchased repeat steps 2 5 3 Optional 2 Daily Operation de ee 4 Troubleshooting 1 Overview 27 SECTION 5 WARRANTY SAFETY amp SPECIF
25. ogies a lanc un programme de recyclage de produits en Europe conform ment la directive de l Union Europ enne 2002 96 CE relative aux d chets d quipements lectriques et lectroniques directive DEEE Veuillez visiter notre page Web www Lightspeed tek com pour plus de renseignements ii Ce produit est fabriqu en utilisant des processus sans plomb ni aucune autre mati re nuisible l environnement Il est conforme aux nouvelles r gles europ ennes les plus strictes en mati re de biens de consommation RoHS Ce dispositif est conforme l article 15 de la r glementation FCC Le fonctionnement est soumis aux deux conditions suivantes 1 ce dispositif ne peut pas causer d interf rence nuisible et 2 ce dispositif doit accepter toute interf rence recue notamment les interf rences pouvant occasionner un fonctionnement non souhait Tout changement ou modification n ayant pas fait l objet d une autorisation expresse manant de la partie responsable de la conformit pourraient entrainer la perte du droit d usage de l quipement par l utilisateur Cet quipement a t test et certifi conforme aux restrictions pour les appareils num riques de Classe B conform ment l article 15 de la r glementation FCC Ces restrictions visent assurer une protection raisonnable contre les interf rences nuisibles dans les installations r sidentielles Cet quipement produit utilise et peut mettre de l nergie
26. ooting 23 24 5 Warranty Safety 3 Optional Accessories 4 Troubleshooting 2 Daily Operation 1 Overview amp Specifications OUTPUT TO ASSISTIVE LISTENING DEVICE ALD 1 Turn the ALD Assistive Listening 4 Device volume control on the Media Connector front panel all way the down 2 Determine the size and type of audio input jack on the device as many manufacturers products differ in connector size and shape 5 The Lightspeed 370 Personal FM System requires a 3 5mm to 3 5mm patch cable part MMC3535 3 Connect a patch cable from the ALD s microphone jack or AUX input to the 3 5mm audio jack labeled ALD OUT on the front of the Media Connector With the TOPCAT and ALD turned on speak into the REDMIKE VC and slowly adjust the ALD volume control on the Media Connector until the appropriate audio level is attained in the ALD s receiver headphones It may be necessary to adjust the volume on the Personal FM receiver to achieve appropriate volume level lightspeed ALD Receiver ALD Transmitter SECTION 4 TROUBLESHOOTING COMMON PROBLEMS AND SOLUTIONS Note Most problems are directly related to low battery power Please run through the Battery Check items first For remaining troubleshooting use known good fully charged batteries ALL PROBLEMS most problems are related to low battery power SOLUTION batt
27. paratus combination to avoid injury from tip over Unplug this apparatus during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped When the mains plug or appliance coupler is used as the disconnect device it shall remain readily accessible Please keep the unit in a good ventilation environment Warning To reduce the risk of fire or electric shock do not expose this apparatus to rain or moisture Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids such as vases shall be placed on the apparatus N IMPORTANT SAFETY INSTRUCTIONS conto To avoid potential equipment damage and or serious injury READ AND FOLLOW all safety precautions when installing the TOPCAT WARNINGS are included throughout the procedural steps in this guide and are repeated below for emphasis USE A LICENSED ELECTRICIAN FOR POWER CONNECTIONS The TOPCAT system uses standard 100 240VAC power Obtain the services of a licensed electrician when supplying and connecting power to the ceiling enclosure BE SURE electrical installation complies with local building codes
28. the LED will blink red 22 REDMIKE Share f L E 3 Plug the other end into the charging jack on the back of the cradle charger d O gt ci Overview 1 21 5 Warranty Safety amp Specifications 4 Troubleshooting 3 Optional Accessories 2 Daily Operation 1 Overview REDMIKE SHARE INITIAL SET UP 1 Ensure the TOPCAT is on The blue LED on the Media Connector will glow 2 Turn on the REDMIKE Share by sliding the switch to the up position 3 Grip the barrel in the center section Avoid covering the infrared emitters just below the microphone grille This could interrupt signal transmission 4 Use a flat blade screwdriver to slowly adjust the channel B volume on the TOPCAT so that the user can barely hear their own voice while speaking into the microphone REMEMBER This equipment is designed to supplement and distribute the user s voice so they are able to speak in a conversational tone Having the volume set too high will result in feedback and listener fatigue PAGEFIRST INTERFACE This optional feature interfaces with an independent classroom paging system When the page is broadcast all audio from the system is muted ensuring important and even emergency school wide messages are never missed How it works 1 PageFirst sensor clip is hung around the lead wires attached to the classroom paging speaker 2 The clip is connected to the
29. tment 4 Speak using a conversational level and TOPCAT will evenly distribute your voice throughout the room 5 The TOPCAT has been set up to provide optimum volume level during installation REMEMBER This equipment supplements the user s voice so they are able to speak in a conversational tone Having the volume set too high will result in feedback and listener fatigue 6 To fine tune the volume use the up down buttons on the back of the REDMIKE VC NOTE the REDMIKE VC has 4 volume levels up and 4 levels down from the mid point 9 levels total 7 If a second REDMIKE VC was purchased repeat these steps This microphone will be marked with a CH B sticker on the back indicating it is preset to channel B 8 To use the REDMIKE VC as a handheld pass around microphone a unclip the lanyard b hold the lower portion of the microphone c ensure the IR emitter is facing outward d position the top of the microphone at about collarbone height 4 Troubleshooting 2 Daily Operation 1 Overview 3 Optional Accessories 2 0 sa s wo 15 3 Optional 5 Warranty Safety Accessories 4 Troubleshooting amp Specifications 2 Daily Operation 1 Overview 16 3 CHARGING THE REDMIKE VC Before use the REDMIKE VC should be charged It will take 8 9 hours for the REDMIKE VC to obtain a full charge A fully charged REDMIKE VC will last for o
30. ver 7 hours of use If microphones are used daily they should be kept in the cradle microphones can be left in a cradle charger constantly for up to 2 weeks without causing degradation to battery life A red light on the charging cradle indicates the REDMIKE VC is charging A green light indicates that charging is complete and a full charge has been reached A blinking light indicates a charging or sensing error See Troubleshooting section for more information REDMIKE VC incorporates alkaline protection into the microphone design Always use a Lightspeed rechargeable sensing battery Replacement AA NiMH batteries may only be purchased through Lightspeed Technologies part NH2A27 1 Plug power cord into the cradle charger and then plug the AC end into an electrical outlet 2 Place the REDMIKE VC into the cradle The LED on the cradle will glow red indicating charging has started When the REDMIKE VC is fully charged the LED on the cradle charger will change to green 4 USING THE MEDIA CONNECTOR For setup instructions refer to the installation guide The Media Connector can be used as the primary volume control for the audio sources you ve connected 1 Connect the audio source s to the Media Connector using the 3 5mm cables provided 2 Set the audio source volume to provide sound through the TOPCAT P apo upo apo ugo ER 3 Use the Media Connector volume e control to
Download Pdf Manuals
Related Search