Dataforth IsoLynx Driver Help
Contents
1. 16 Device lt device name gt responded with error lt Error Code gt Tag lt address gt during Con 16 EAIA N T NE OR Shh DRS RAD Ne Frs Device address lt address gt is Read 15 Device address lt address gt contains a syntax 15 Device Setup a a A 5 Device Status Messages 1006 te nu eae di en 12 15 Driver Error sant oe adi dh Soe 12 16 ide cu aan 7 E Error 12 Ethernet Connections 6 www kepware com Dataforth IsoLynx Driver Help 15 16 ISOLYNX Data Acquisition 7 M Missing address NAT nn ead os ae su 14 N Network Interface 4 NICE sr Me ttes PR 4 O ne en2. B Channeli m Devicel 3 Analog_Panel_0 7 GA Inputs CA Outputs Analog_Panel_1 Digital_Panel_o GA Configuration CA Inputs CA Outputs Digital_Panel_1 Tag Name Address Data Type Scan Rate Scalin Panel0_AOD_ChannelO 00 40D 00 Long 100 None Panel0_AOD_Channelt 00 00 01 Long 100 None ZlPanelo_AOD_Channel10 00 40D0 04 Long 100 None PanelO_40OD_Channel2 00 00 02 Long 100 None PanelO_40OD_Channel4 00 40D 04 Long 100 None PanelO_40OD_Channel6 00 40D 06 Long 100 None fipanel0_asw_Channel11 00 45 06 Long 100 None PanelO_A4SW_Channel3 00 45 03 Long 100 None PanelO_ASW_ChannelS 00 45 05 Long 100 None PanelO_ASW_Channel OO ASW 07 Long 100 None PanelO_ASW_Channel8 OO ASW 08 Long 100 None 0_ 5 _ 9 00 A5w 09 Long 100 None 4 4 gt bl Devices Advanced 2 Inputs www kepware com Dataforth IsoLynx Driver Help Runtime File Edit View Tools Runtime Help 65209 0 Dex p Channeli Devicel 21 08 Analog_Panel_0 A Configuration 8 Outputs 9 08 Analog_Panel_1 5 3 Digital_Panel_0 A Configuration Outputs H Digital_Panel_1 Devices Outputs Runtime File Edit View Tools Runtime Help Tag Name Panel0_AIA_Channelt PanelO_AI4_Channel11 _ Panel0_AIA_Channel3 _ Pan
3. lt address gt during Connect Automatic Tag Database Generation Messages Unable to Connect to Device or IO Inquire error See Also Dataforth Data Acquisition Library Error Code Descriptions Dataforth Data Acquisition Library Error Code Descriptions The following table lists the Error Codes returned by the Dataforth Data Acquisition Library 1001 Failed toinitiaize client O O 2005 2030 Communications send operation with echo faea www kepware com Dataforth IsoLynx Driver Help Invalid 1 0 processor type 3008 Failed to add I O device to list 3018 Failed to parse 1 0 channel configuration 3023 Invalid 1 0 channel Read Write samples 3024 Invalid 1 0 channel Read Write channel list count 6000 String not found in file 6003 Error writing value to file 11000 Failed to initialize serial COM port 11004 Serial COM port already in use 11005 Invalid serial COM IRQ 3025 Non blocking I O operation in progress 11006 Invalid serial COM flow control 11007 Invalid serial COM parity 12000 Failed to initialize socket COM port 12001 Failed to open socket COM port 12002 Invalid socket COM port 12003 Failed to connect to socket COM server 21000 Invalid IsoLynx script 21001 Invalid IsoLynx address 21002 Invalid Isolynx panel www kepware com Dataforth IsoLynx Driver Help Invalid IsoLynx 1 F type 21041 Invalid IsoLynx analog output initial data 21120 command not acknowle
4. is out of range for the specified device or 15 Data Type lt type gt is not valid for device address 5 15 Device address lt address gt is Read Only 15 Device Status 5 5 15 Device lt Device name gt is not responding 15 Unable to write to lt address gt on device lt device 16 Driver Error Messages fos see eater eae ES SUR 16 Device lt device name gt responded with error Error Code Tag 16 Device lt device name gt responded with error Error Code Tag address during Connect 16 Automatic Tag Database Generation 17 Unable to Connect to Device or Inquire error during tag Database Creation 17 M re de Sn Nr 18 www kepware com 3 Dataforth IsoLynx Driver Help Dataforth IsoLynx Driver Help Help version 1 015 CONTENTS Overview What is the Dataforth IsoLynx Driver Channel Set
5. ann al re Le 7 recto cae 3 5 Serial Connections 22 22 retin tentacle maid doesent cine 5 U Unable to Connect to Device or Inquire error during tag Database Creation 17 Unable to write to lt address gt on device lt device 16 www kepware com
6. Dataforth IsoLynx Driver Help 2013 Kepware Technologies Dataforth IsoLynx Driver Help 2 Table of Contents Tapie Of Contents A 2 Dataforth IsoLynx Driver 3 OVERVIEW 3 Channel Setups bacadddou set eddddeauahea s 4 Device 5 Cable 5 Driver Setup gt 2 255 a Bs feist oe 7 Automatic Tag Database 8 Data Types 10 Address Descriptions 11 Error Descriptions 12 Dataforth Data Acquisition Library Error Code 12 Address Validation _______ _ 14 Missing address Nh lar al 14 Device address lt address gt contains a syntax 15 Address lt address gt
7. alue Even though the data type is Long all analog values are limited to a range of 32 767 to 32 768 www kepware com Dataforth IsoLynx Driver Help Address Descriptions The following table lists the address syntax for all of the supported addresses Address Description Syntax DataType Access Analog Input Current PP AIC CC Read Only PP panel range 00 03 CC channel range 00 0F Analog Anput Average PP AIA CC Read Only PP panel range 00 03 CC channel range 00 0F Digital Input PP DI CC Boolean Read Only PP panel range 08 0 CC channel range 00 0F Analog Output PP AO CC Read Write PP panel range 00 03 CC channel range 00 0F Analog Sample Weight PP ASW CC Read Write PP panel range 00 03 CC channel range 00 0F Digital Output PP DO CC Boolean Read Write PP panel range 08 0F CC channel range 00 0F Analog Output Default PP AOD CC Read Write PP panel range 00 03 CC channel range 00 0F Digital Output Default PP DOD CC Boolean Read Write PP panel range 08 0 CC channel range 00 0F Even though the data type is Long all analog values are limited to range of 32 767 to 32 768 Tag type ASW Analog Sample Weight is a special case in that the value is limited to powers of 2 up to a max imum value of 16384 If an attempt is made to write a value that is not a power of 2 then the next power of 2 will be derived from that value and then written into the device For e
8. dged Error Code 14 21122 command not acknowledged Error Code 16 21123 IsoLynx 1 command not acknowledged Error Code 17 21204 Invalid keep alive timeout value 21200 IsoLynx network options do not match script Address Validation The following error warning messages may be generated Click on the link for a description of the message Address Validation Missing address Device address lt address gt contains a syntax error Address lt address gt is out of range for the specified device or register Data Type lt type gt is not valid for device address lt address gt Device address lt address gt is Read Only Missing address Error Type Warning Possible Cause A tag address that has been specified dynamically has no length Solution www kepware com Dataforth IsoLynx Driver Help Re enter the address in the client application Device address lt address gt contains a syntax error Error Type Warning Possible Cause tag address that has been specified dynamically contains one or more invalid characters Solution Re enter the address in the client application Address lt address gt is out of range for the specified device or register Error Type Warning Possible Cause A tag address that has been specified dynamically references a location that is beyond the range of supported locations for the device Solution Verify that the address is correct if
9. e IP address or ID given to the named device matches that of the actual device 3 Increase the Request Timeout setting so that the entire response can be handled 4 Verify that the Communications Channel Properties match those used when the device was configured with Dataforth configuration utility For more information refer to the section on Communication Interface Reset Jumper in the hardware user s manual 5 Cycle power to device Unable to write to lt address gt on device lt device name gt Error Type Serious Possible Cause 1 The connection between the device and the Host PCis broken 2 The IP address or ID assigned to the device is incorrect 3 The interface type com port or baud rate on device are configured incorrectly Solution 1 Verify the cabling between the PC and the device 2 Verify the IP address or ID given to the named device matches that of the actual device 3 Verify that the Communications Channel Properties match those used when the device was configured with Dataforth configuration utility For more information refer to the section on Communication Interface Reset Jumper in the hardware user s manual Driver Error Messages The following error warning messages may be generated Click on the link for a description of the message Driver Error Messages Device lt device name gt responded with error lt Error Code gt Tag lt address gt Device lt device name gt responded wi
10. el0_AIA_Channel5 Panel0_AI4_Channel Panel0_AI4_Channel9 _ Panel0_AIC_Channelt 0 11 0 3 0 5 0_ _ 7 0_ _ 9 SMSoF 0 Channeli 2 0 Device 21 03 Analog_Panel_0 Configuration 2 8 Digital_Panel_0 A Configuration Inputs Outputs Digital_Panel_1 Devices Tag Name EZ Panelo _A0_Channel0 EZ Panelo _A0_Channel10 amp ZPanelo_AO_Channel2 EZ Panelo _A0_Channel4 amp ZPanelo_AO_Channel amp ZPanelo_AO_Channels www kepware com Address 00 01 00 414 06 00 414 03 00 414 05 00 07 00 414 09 O0 41C 01 00 41C 06 O0 41C 03 O0 41C 05 O0 AIC 07 00 09 Address 00 40 00 00 40 04 00 40 02 00 40 04 00 40 06 00 40 08 Data Type Long Long Long Long Long Long Long Long Long Long Long Long Data Type Long Long Long Long Long Long Scan Rate 100 100 100 100 100 100 100 100 100 100 100 100 Scan Rate 100 100 100 100 100 100 Scalin None None None None None None None None None None None None Scalin None None None None None None Dataforth IsoLynx Driver Help Data Types Description Data Type Boolean Library returns a signed 32 bit value which is either a 0 or 1 Library returns a signed 32 bit v
11. formation refer to 3 5 Sample Applications and Configuration Sample in the software man ual Cable Diagrams Serial Connections For more information refer to ISOLYNX hardware user s manual Appendix D AN302 ISOLYNX I O expansion net work configurations www kepware com Dataforth IsoLynx Driver Help Ethernet Connections For more information on RS 232 RS 485 2 wire RS 485 4 wire and Ethernet connections refer to Section 7 0 of ISOLYNX hardware user s manual Patch Cable Straight Through TD 1 OR WHT 1 TD OR 5 10 BaseT RD 6 GRN GRN 6 RD BRN WHT BRN WHT BRN 12345678 8 pin RJ45 www kepware com Dataforth IsoLynx Driver Help Driver Setup This driver uses the ISOLYNX Data Acquisition Library which is comprised of the following six dynamic link libraries e LYNXW32 DLL e _ISOLYNX DLL e _SUPER DLL e SUPERCOM DLL e SCRS232 DLL SCTCPIP DLL When the driver is installed the server will install these components into the Windows system directory www kepware com Dataforth IsoLynx Driver Help Automatic Tag Database Generation The Dataforth IsoLynx Driver supports an automatic tag database generation feature that enables drivers to auto matically create tags to access data It queries the device for its configuration and then uses that information to build a tag database OPC Server Configuration Automatic tag database generation can be customized t
12. it is not re enter it in the client application Data Type lt type gt is not valid for device address lt address gt Error Type Warning Possible Cause A tag address that has been specified dynamically has been assigned an invalid data type Solution Modify the requested data type in the client application Device address lt address gt is Read Only Error Type Warning Possible Cause A tag address that has been specified dynamically has a requested access mode that is not compatible with what the device supports for that address Solution Change the access mode in the client application Device Status Messages The following error warning messages may be generated Click on the link for a description of the message Device Status Messages Device lt device name gt is not responding Unable to write to lt address gt on device lt device name gt Device lt Device name gt is not responding Error Type Serious Possible Cause 1 The connection between the device and the Host PC is broken 2 The IP address or ID assigned to the device is incorrect www kepware com Dataforth IsoLynx Driver Help 16 3 The response from the device took longer to receive than the amount of time specified in the Request Timeout device setting 4 The interface type com port or baud rate on device are configured incorrectly Solution 1 Verify the cabling between the PC and the device 2 Verify th
13. nd the device 2 Verify the IP address or ID given to the named device matches that of the actual device 3 Verify that the Communications Channel Properties match those used when the device was configured with Dataforth configuration utility For more information refer to the section on Communication Interface Reset Jumper in the hardware user s manual Note The error code detailed in the message was returned by the Dataforth Data Acquisition Library while trying to con nect to the device For more information refer to Dataforth Data Acquisition Library Error Code Descrip tions Automatic Tag Database Generation Messages The following error warning messages may be generated Click on the link for a description of the message Automatic Tag Database Generation Messages Unable to Connect to Device or IO Inquire error Unable to Connect to Device or IO Inquire error during tag Database Creation Error Type Serious Possible Cause 1 The connection between the device and the Host PCis broken 2 The IP address or ID assigned to the device is incorrect 3 The interface type com port or baud rate on device are configured incorrectly 4 The I O configuration set with Dataforth configuration utility is incorrect Solution 1 Verify the cabling between the PC and the device 2 Verify the IP address or ID given to the named device matches that of the actual device 3 Verify that the Communications Channel Properties match
14. o fit the application s needs The primary control options can be set during the Database Creation step of the Device Wizard or later by clicking Device Properties Data base Creation For more information on these settings refer to the server help documentation Operation Depending on the configuration tag generation may start automatically when the server project starts or be ini tiated manually at some other time The server s Event Log will show when the tag generation process started any errors that occurred while the device s configuration was queried and when the process completed Group and Tag Naming Conventions A group is created for each analog and digital panel the system Three subgroups are created under each pan el s group for Configuration Inputs and Outputs tags e The Configuration group contains tags that will be used for device configuration Tag types include AOD ASW and DOD The Inputs group contains tags for reading inputs Tag types include AIA AIC and DI e The Outputs group contains tags for reading and writing to outputs Tag types include AO and DO Each tag name includes the panel tag type and channel number The following images illustrate a system with two analog panels and two digital panels Note Digital panels names are numbered starting at even though they are physically addressed at 8 and up Configuration rrr File Edit View Tools Runtime Help DS AD 21609 9
15. oth the Interface and the I O For more information refer to section 3 5 Sample Applications in the software user s manual It is possible to configure an I O channel incorrectly or to configure a channel with no I O module phys ically present The best way to verify that the I O configuration is correct is to perform an auto create of the tag database and then match the tags generated to the actual hardware I O The Ethernet interface board supports up to four simultaneous connections at a time This means that there can only be up to four devices with same IP address running in the server at one time These devices can be assigned to one or more channels When configuring a device s IP address and associated items using Dataforth s configuration utility pay attention to the Keep Alive item This item defines how long in seconds the Ethernet interface board will keep its con nection alive when no activity is seen When using multiple connections to the same device it is strongly rec ommended that this item be set to a value of 1 If not the server may not be able to re establish a connection to the device when a break occurs in the connection Note 1 This driver provides multi threaded processing for optimum performance Note 2 Each physical device to be polled must be represented by a device object in the server Important The communication parameters selected must match those set up with the Dataforth configuration utility For more in
16. s that support the ISOLYNX protocol Supported Protocols ISOLY NX protocol over serial lines and Ethernet Networking This driver supports communications over serial lines and Ethernet For more information on ISOLYNX com munications and connections refer to Section 7 0 of ISOLYNX hardware user s manual Maximum Number of Supported Channels and Devices The maximum number of supported channels is 100 The maximum number of devices supported per channel is 16 IP Address This parameter specifies the IP address of the device to poll Note TCP IP must be properly installed in order to use this driver with Ethernet devices For more information on setting up TCP IP refer to Windows documentation Port Number This parameter specifies the Ethernet port that will be used when connecting to a remote terminal server The default setting is 9000 Device Configuration Each device on a network must be configured with a unique Address ID For information on setting each device s network address refer to Network Address Selection in the ISOLYNX hardware user s manual Each additional panel within the system must also have its individual address configured For more information refer to ISOLYNX hardware user s manual section on Analog I O expansion panel Address selection and Digital 1 0 expansion panel Network Address Selection The final step in the device setup process is to use the Dataforth supplied configuration utility to configure b
17. th error lt Error Code gt Tag lt address gt during Connect Device lt device name gt responded with error Error Code Tag address Error Type Serious Possible Cause 1 The connection between the device and the Host PCis broken 2 The IP address or ID assigned to the device is incorrect 3 The interface type com port or baud rate on device are configured incorrectly Solution 1 Verify the cabling between the PC and the device 2 Verify the IP address or ID given to the named device matches that of the actual device 3 Verify that the Communications Channel Properties match those used when the device was configured with Dataforth configuration utility For more information refer to the section on Communication Interface Reset Jumper in the hardware user s manual Note The error code detailed in the message was returned by the Dataforth Data Acquisition Library For more infor mation refer to Dataforth Data Acquisition Library Error Code Descriptions Device lt device name gt responded with error Error Code Tag address dur ing Connect Error Type Serious Possible Cause www kepware com Dataforth IsoLynx Driver Help 1 The connection between the device the Host is broken 2 The IP address or ID assigned to the device is incorrect 3 The interface type com port or baud rate on device are configured incorrectly Solution 1 Verify the cabling between the PC a
18. those used when the device was configured with Dataforth configuration utility For more information refer to the section on Communication Interface Reset Jumper in the hardware user s manual 4 Run the Dataforth configuration utility and verify that the I O configuration matches the physical hardware www kepware com Dataforth IsoLynx Driver Help Index A Address lt address gt is out of range for the specified device or register 15 5 tt sr Ve ct MR ans Sn nue nn SRA ee 11 Address Validation 12 14 Automatic Tag Database 8 Automatic Tag Database Generation 17 C Gable Diagrams chest he yea ae a ne NS Gc een 5 Channel Setup aaa 4 D Data Type lt type gt is not valid for device address lt gt 15 Data Types Description 10 Dataforth Data Acquisition Library Error Code Descriptions 12 Device lt device name gt is not 15 Device lt device name gt responded with error lt Error Code gt Tag lt gt
19. tion on general Channel Properties refer to the main OPC server s help documentation Communications New Channel Communications Descriptions of the parameters are as follows e Interface Type This parameter specifies the interface type Options include RS 232 RS 485 2 RS 485 4 and Ethernet The default setting is RS 232 COM Port This parameter specifies the COM port for serial communications The valid range is 1 to 255 The default setting is COM1 e Baud Rate This parameter specifies the baud rate that will be used to configure the selected COM port Options include 1200 2400 4800 9600 19200 38400 57600 and 115200 The default setting is 9600 e Interface Option This parameter specifies the options available to the interface When the interface type is RS 485 2 the options Echo Off and Echo On will be available When the interface type is RS 232 RS 485 4 or Ethernet no options will be available The setting will be disabled and display None Note The selected communication parameters must match those set in the Dataforth Configuration Utility For more information refer to section 3 5 Sample Applications and Configuration Sample in the software user s manual www kepware com 5 Dataforth IsoLynx Driver Help Device Setup For more information on general Device Properties refer to the main OPC server s help documentation Supported Devices All ISOLYNX SLX100 data acquisition system
20. up How do I configure the communication parameters Device Setup How do I configure a device for use with this driver Driver Setup How do I configure this driver Automatic Tag Database Generation How can easily configure tags for this driver Data Types Description What data types does this driver support Address Descriptions How do I address a data location on an IsoLynx device Error Descriptions What error messages does this driver produce Overview The Dataforth IsoLynx Driver provides an easy and reliable way to connect Dataforth IsoLynx devices to OPC Client applications including HMI SCADA Historian MES ERP and countless custom applications It is intended for use with all ISOLYNX SLX100 data acquisition systems This driver was created in partnership with DATAFORTH and DATAFORTH endorses the use of this driver as the ISOLYNX SLX100 official OPC interface for their products In addition this driver uses DATAFORTH supplied com munication software modules that encapsulates the low level communication details of the isoLynx Command Pro tocol www kepware com Dataforth IsoLynx Driver Help Channel Setup A channel represents a serial line connected to one of the computer s COM ports or an Ethernet network con nected to the computer s default Network Interface Card NIC The Channel Properties specify the type of con nection as well as other properties shared by devices on that network For more informa
21. xample if a value of 5 is written to an ASW tag then 5 will be rounded up to 8 and then written to the device Therefore when reading back the value written it will be 8 instead of 5 For more information refer to section 3 3 4 9 IOATTR_ISOLYNX_AIOPTION_STRUCT in the software user s manual Note 1 Both panel and channel numbers are hexadecimal Note 2 Analog panel 0 ONLY has a channel range of 0 to B Note 3 The first digital panel s number would be 8 even though the physical address of the board would be likely set to 0 For more information refer to section 6 0 IsoLynx Digital I O Backpanel Description in the hard ware user s manual www kepware com Dataforth IsoLynx Driver Help Error Descriptions The following error warning messages may be generated Click on the link for a description of the message Address Validation Missing address Device address lt address gt contains a syntax error Address lt address gt is out of range for the specified device or register Data Type lt type gt is not valid for device address lt address gt Device address lt address gt is Read Only Device Status Messages Device lt device name gt is not responding Unable to write to lt address gt on device lt device name gt Driver Error Messages Device lt device name gt responded with error lt Error Code gt Tag lt address gt Device lt device name gt responded with error lt Error Code gt Tag
Download Pdf Manuals
Related Search