User Manual
Contents
1. Laser Show System Model CVLC LT222 User Manual Thanks for your purchasing please read this manual carefully before operating the system It gives you general information for your safety and better operation Inspection Check for the contents in the package refers to the following list 1 2 ND wn A U N e IP65 water proof and dust proof laser 1 Adaptor 1 3 User manual 1 Installation Firstly be sure that the using voltage is match with the voltage marked on the base of the laser lighting Installation should be made by professional technician Fix the laser and adjust the angle of the laser lighting to your need Be sure that there is no flammable or explosive subject nearby The least distance is 0 5 meters The laser lighting should be fixed by inserting into soil or attached to trees etc It is essential to be earthed well for the sake of safety Technical parameters Laser diode DPSS Red 650nm Green 532nm Blue 470nm Power supply AC 220V 50Hz Laser power Red 100mw Green 40mw Blue 100mw Effect Static firefly twinkling Dimensions 28 x 22 x14cm Net weight 1 00KG Gross weight 1 30KG lt gt Warning Ingress protection IP65 Do NOT soak in water It works for rainy days ONLY Power off before installation or maintenance The danger class of this laser lighting is CLASS III B It s dangerous for observing laser The2. safe minimum distance is 13cm the safe maximum time is 10 seconds Keep at least 0 5 meters distance between the lighting and flammable material The voltage range from 200V to 240V Suggest using regulator to prolong the lifetime of the laser lighting Maintenance Please clean the lens regularly Do not clean it using the wet cloth or other chemical The clean times is depend on the using frequency and surrounding condition it is recommended that should be cleaned every 20 days Please clean the lighting surface and engine outlet regularly Notices X Ingress protection IP65 Do NOT soak in water X Non professional do not dismantle or repair the laser lighting If there is any problem please inquire with the professional or contact with the local dealer gt lt Prevent the laser lighting from strong vibration or punch gt lt Before power on be sure the adaptor is connected well with the socket X Do not turn on and turn off frequently avoid to turn on the power for a long time X Please power off the lighting for 15 minutes after running two hours ensure that the laser system is in well cooling state X Do not looking at the laser source using telescope X Do not touch the adaptor with wet hands and forcefully pull the power line X The distance between lighting and casting medium should be more than 1 meter gt lt When to be transported use the original package dpe ae ne eee
Download Pdf Manuals
Related Search