Home

Answer - DTP

1. Click File Import switch to the following location C Program Files Corel Graphics 10 Custom Patterns Import the fill in question for now use the bubble1 pat Then click Tools Create Pattern Select Full Color Click O k With the Crosshair cursor click and drag directly around the grey rectangle of the pattern Only selecting the rectangle and a small pie section out of each elipse Let go click o k then it will prompt for a save Overwrite the existing file that was imported Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205852 htm 22 02 2002 16 21 51 http kb corel com kbdocs UNKNOWN DRAW 10 DRAW 10_205853 htm Top Navigational Bar Where is the Special Fill Docker DocumentID 205853 Revision Date 5 7 2001 10 03 11 AM The information in this document applies to CorelDRAW 10 Problem Unable to locate the Special fill docker window Unable to app
2. 1 The volume label on the drive that is shared out MUST begin with the word Clipart i e ClipartNet Clipart1 Clipart2 etc 2 On the local system map a drive letter to the network share i e X 3 Copy the contents of the clipart CD to the mapped network share 4 On the local system run REGEDIT 5 Browse to the HKEY_LOCAL_MACHINE Software COREL Media 6 Highlight the Media folder 7 Click on Edit New Key 8 Type a name for the key i e ClipartNet 9 With the new key i e ClipartNet highlighted click on Edit New String Value 10 Type Path for the name of the String Value 11 Double click on the String Value and enter the mapped drive letter for the local system see step 2 12 Click on Edit New String Value 13 Type VolumeLabel for the name of this String Value 14 Double click on the String Value and enter the volume label from Step 1 i e ClipartNet 15 Click Edit New DWORD Value 16 Type Type for the DWORD Value 17 Double click on the DWORD Value and enter a value of 3 18 Close REGEDIT NOTE This will need to be done for each workstation If all operating systems are the same export the newly created reg key and execute it on each workstation Just make sure that when the drives are mapped to the clipart share that each computer assigns the map to the same drive letter Otherwise the drive letter will require changing as per instruction 2 11 Once this is done a new ico
3. Brush Textures Brush textures can be used within CorelDRAW and Corel R A V E To add additional brush textures drag and drop these files to the Draw CustomMediaStrokes folder where CorelDRAW is installed Frames Frames can be used within CorelDRAW Corel PHOTO PAINT and Corel R A V E To add additional frames drag and drop these files to the Custom Frames folder where CorelDRAW is installed Image Lists Image Lists can be used within Corel PHOTO PAINT To add additional image lists drag and drop these files to the Photopnt IlmgLists folder where Corel PHOTO PAINT is installed Spray lists Spray lists can be used in CorelDRAW and Corel R A V E To add additional spray lists drag and drop these files to the Draw CustomMediaStrokes folder where CorelDRAW is installed Patterns Select patterns to use within CorelDRAW Corel PHOTO PAINT and Corel R A V E To additional patterns drag and drop these files to the Custom Patterns folder where CorelDRAW is installed Sounds CorelDRAW and Corel R A V E support sounds through the operating system You can assign feedback sounds to specific events and you can enable feedback sounds To assign feedback sounds with CorelDRAW and Corel R A V E 1 Click Start on the Windows taskbar 2 Click Settings Control Panel 3 Double click Sounds 4 Choose CorelDRAW or Corel R A V E from the Events list http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206267 htm 2 von 3 22 02 2002 16 23
4. Corel Texture Version 3 0 CorelDRAW http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206249 htm 1 von 2 22 02 2002 16 22 19 Uninstalling CorelDRAW 10 from Windows 95 Texture Batcher Version 3 0 5 Close HKEY_CURRENT_USER double click on HKEY_LOCAL_MACHINE to open it and double click on Software Double click on the Corel Section 6 Open the files listed below and delete any references to CorelDRAW 10 There may be a section entitled 10 Delete that section only Corel R A V E CorelDRAW MasterComponentList CorelSEARCH Media Component Apps Removing Taskbar Entries 1 Click Start Settings Taskbar 2 Click Start Menu Programs and click Remove 3 Click the version of CorelDRAW being removed and click Remove Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206249 htm 2 von 2 22 02 2002 16 22 19 Installation Instructions and FAQs Top Navigati
5. GIF format from the Save As Type list box and click Export http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206259 htm 1 von 3 22 02 2002 16 22 49 Creating Transparent Bitmaps 4 In the Bitmap Export dialog box select the desired bitmap settings Internet graphics in the GIF format are usually Paletted 8 bit with a resolution of 72 dpi Click the OK button 5 In the GIF Export dialog box enable the Image Color box Select the Eye Dropper tool and click on the desired color in the Original preview window Click OK Note The Masked Area option is not available when exporting to the GIF file format from CorelDRAW 10 Removing Bitmap Backgrounds Using the CPT filter Note This method works best with images that contain backgrounds of a single color 1 Open the image in Corel PHOTO PAINT10 2 Click on the Mask Tool with the left mouse button and hold From the Mask flyout select the Magic Wand Mask Tool 3 Using the Magic Wand Mask Tool click on the color background on the open image 4 Click on the Mask menu Select Invert 5 Click on the Edit menu Select Copy 6 Click on the Edit menu select Paste New From Clipboard or click on File New From Clipboard 7 Save the file as a Corel PHOTO PAINT Image CPT 8 Import the file into CorelDRAW 10 Removing Bitmap Backgrounds Using Clipping Paths Masks EPS Method Note This method does not support CMYK 32 bit color bitmaps 1 Open the image in Corel PHOTO PAIN
6. Make the user a member of the Power User group for information on how to change group membership contact Microsoft 2 Give the user group full access to the graphics10 folder X Program files corel graphics10 Replace 10 with 9 if running CorelDRAW 9 Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206825 htm 22 02 2002 16 28 29 http kb corel com kbdocs UNKNOWN DRAW 10 DRAW 10_206826 htm Top Navigational Bar Cannot Create Effect Component message when accessing bitmap effects in CorelIDRAW PHOTO PAINT 10 DocumentID 206826 Revision Date 1 14 2002 1 40 55 PM The information in this document applies to CorelDRAW 10 Problem Cannot Create Effect Component when accessing bitmap effects after having installed CorelDRAW 10 Service Pack 1 This may occur as a result of having TSR s loaded into memory which had conflicted with the installation process
7. Options Documents CorelDRAW will apply these settings to the current document as well as the default settings for new CorelDRAW documents The new default document uses the following settings from the current document General options Page options Guideline options Grid and Ruler options Styles Save options Publish to the Web options The changes will be saved as defaults for all future CorelDRAW 10 work sessions In CorelDRAW 10 many customizations can be made with the menus toolbars toolboxes and status bars You have the ability to drag and drop menu items from the menu to a property bar or to another menu by holding down the ALT key There is an easy way to reverse customizations should you decide to return to the default settings Press F8 on your keyboard and launch CorelDRAW 10 simultaneously A message dialogue box will come up saying Are you sure you want to overwrite the current workspace with the factory default Select Yes Note When you set you application back to the default settings you will lose all customizations To set individual menus toolbars toolboxes and status bars back to default settings 1 Select Tools 2 Choose Customization http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206264 htm 1 von 2 22 02 2002 16 23 03 Changing Default Settings 3 Click on the Command Bars 4 Highlight the Command Bar to be set back to default 5 Click Reset 6 A dialogue box wil
8. recommended that your system administrator make the following changes The importance of adhering to recommended recovery precautions as listed cannot be overstated The Corel Corporation assumes no expressed or implied liability for any computer or software damages resulting from the use or misuse of this information 1 Click Start Run 2 Type Regedit and hit the Enter key 3 Go to HKEY_LOCAL_MACHINE Software Corel CorelDRAW 10 0 4 Verify there is an entry called ConfigDir 5a If this entry exists rightclick it and choose Modify Verify the path is the installation path ie c Programs Files Corel Graphics 10 Config 5b If this entry does not exist right click on the right hand side and choose New String Value 7 Rename it ConfigDir and hit Enter 8 Right click the new string and choose modify 9 Enter the correct installation path in the Value Data field ie C Program Files Corel Graphics10 Config 9 Click OK to close the Edit String window and click Registry Exit 10 Relaunch CorelDRAW Details http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206556 htm 1 von 2 22 02 2002 16 27 39 Configdir not found in the registry Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our kn
9. 16 22 56 File Backup Options Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_ 206261 htm 2 von 2 22 02 2002 16 22 56 Changing Default Settings Top Navigational Bar Changing Default Settings DocumentID 206264 Revision Date 6 21 2001 3 55 44 PM The information in this document applies to CorelDRAW 10 Problem Answer Establishing Default Style settings for Artistic text Paragraph text Bullets and Graphics 1 Launch CorelDRAW 10 2 Click Tools Graphic amp Text Styles 3 Click the desired default object type from the list i e Default Graphic and right click 4 Click Properties 5 From the various options styles set the default attributes for the object text or bullet 6 Click on the Document menu ensure that there is a checkmark on the Styles option and click OK To set defaults for technique preferences make the desired changes and click Tools
10. 25 18 TEXT WILL NOT CHANGE IN CHILD CLONE WHEN PARENT IS CHANGED IN DRAW 10 Top Navigational Bar TEXT WILL NOT CHANGE IN CHILD CLONE WHEN PARENT IS CHANGED IN DRAW 10 DocumentID 206412 Revision Date 6 20 2001 4 28 23 PM The information in this document applies to CorelDRAW 10 Problem In CorelDRAW 10 the child clones do not change when the parent clone text is modified If the text is edited in real time within the workspace it will break the link between the two objects Follow this procedure to resolve this issue Answer Follow this procedure to resolve this issue 1 Create artistic text in the workspace 2 Click on EDIT CLONE to clone the text 3 To change the text in all the clones select the parent object with the pick tool Click on TEXT from the Menu bar and select EDIT TEXT Make modifications to the text and click OK The text will now change in the child clones Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL
11. 49 Accessing Clipart and Symbols 5 Click an Event 6 Choose a sound from the Name list box Note The wav files chosen to be used in the applications must be copied into the Windows Media Folder Tiles Tiles can be used within CorelDRAW Corel PHOTO PAINT and Corel R A V E To add additional tiles drag and drop these files to the Custom Tiles folder where CorelDRAW is installed Webart Raster and vector webart images can be used within CorelDRAW Corel PHOTO PAINT and Corel R A V E Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206267 htm 3 von 3 22 02 2002 16 23 49 Assigning PANTONE MATCHING SYSTEM Colors to Raster Images Top Navigational Bar Assigning PANTONE MATCHING SYSTEM Colors to Raster Images DocumentID 206268 Revision Date 6 21 2001 4 12 13 PM The information in this document applies to CorelDRAW 10 Problem Raster images or bitmaps
12. Answer What is Attune Attune is a revolutionary service that provides you with targeted Intelligram messages to help you avoid common computer problems Attune may also let you know when you need a specific product service or upgrade to optimize the use of your computer What are the benefits Attune can notify you of computer problems before they occur You will only be notified when there is an issue that is specifically relevant to your computer Attune continually keeps its information up to date Tips patches and bug fixes are provided proactively Your privacy is absolutely protected How does Attune work Attune runs quietly in the background and automatically updates its Intelligrams when you are connected to the Internet If you are about to encounter a situation on your computer that is known to cause problems Attune presents you with the solution to the situation through an Intelligram Intelligrams are Intelligent Telegrams with the addition of a logic rule that determines if the Intelligram is relevant for you and exactly when you should be notified about it An Intelligram might contain workaround steps to a problem directions for downloading a software patch or a simple executable file for you to run Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specific
13. Click File Print PostScript and change Compatibility to Level 1 If the file still does not print try reducing the Maximum Points Per Curve to 300 and enabling Auto Increase Flatness Q Fonts are not printing correctly on my printer What should do A For non PostScript output click File Print Preview Settings Driver Compatibility and enable All Text As Graphics For PostScript output click File Print PostScript and disable Download Type 1 Fonts Alternately if Artistic Text is being used it may be converted to curves before printing Select the text object with the Pick tool and click Arrange Convert to Curves Note Text that has been converted to curves can no longer be edited as text Q Why is the orientation of the output incorrect when printing to an image setter or other roll fed devices A Obtain the latest PostScript driver for this device The latest Adobe PostScript driver corrects orientation issues on Level 2 PostScript devices Q When use CorelDRAW s Drop Shadow effect and place the object on top of a bitmap or colored background it prints with a halo effect around the drop shadow How do stop that from happening A Most color printer drivers have a setting in the properties that controls how the output will print These settings are usually named Automatic Photographic Vivid Color or Presentation The default is often set to Automatic Change this setting to one of the other available settings such as Vi
14. DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206412 htm 22 02 2002 16 25 23 BARCODE DISPLAYS ON ALL PLATES WHEN PRINTING IN CMYK USING CorelDRAW 10 Top Navigational Bar BARCODE DISPLAYS ON ALL PLATES WHEN PRINTING IN CMYK USING CorelDRAW 10 DocumentID 206413 Revision Date 6 11 2001 3 27 25 PM The information in this document applies to CorelDRAW 10 Problem When printing color separations for a document that contains a barcode the barcode will appear on all the plates Answer 1 Search the harddrive for a file named color ini This file should be located in the Corel Graphics Config folder 2 Double click on the file to open it in notepad 3 Find the line GrayConverts TOCMYK_K 0 and change the 0 to 1 4 Select File Save and close the file 5 Open CorelDRAW 10 and create a barcode Go to File Print and configure separations The barcode will now be visible only on the black plate Details The barcode wizard creates an object that is imported as grayscale Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR
15. English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206432 htm 22 02 2002 16 25 56 Service pack 1 will not install if a beta version was previously installed Top Navigational Bar Service pack 1 will not install if a beta version was previously installed DocumentID 206437 Revision Date 6 20 2001 4 35 50 PM The information in this document applies to CorelDRAW 10 Applies to users with Draw 10 425 beta sp1 applied When applying service pack 1 errors appear pertaining to certain files not being the right version and the installation aborts Uninstall CorelDRAW 10 Reboot Search for the following three files and rename them sccomp100 dll sccres100 dll Scint100 dll Reinstall CorelDRAW 10 Reboot Install SP1 Reboot Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to
16. FPX MAC IMG TGA PNG PCD CAL XCF PP4 PP5 RIF EXE ICO CUR XPM DCS PNM PBM PGM PPM Vector File Types CDR 3DMF CPX CMX WMF VSD TTF PS PRN EPS EPS EMF CGM WPG Al PDF PFB DXF DWG CDX SHW FMV GEM PLT HGL PIC FH MET DRW DSF FMV NAP PCT PPT Animation File Types AVI MOV MOV VR GIF Text File Types TXT RTF SAM WQ WB WPM WP MIF WK XLS DOC WS WSD WSW XY Internet File Types HTML Note SWF SVG and WAV file types are not listed as separate components they are installed with the program files Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_ 206251 htm 2 von 2 22 02 2002 16 22 30 Attune FAQs Top Navigational Bar Attune FAQs DocumentID 206252 Revision Date 6 26 2001 5 43 06 PM The information in this document applies to CorelDRAW 10 Problem
17. ME Startup Diskette If http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206250 htm 2 von 4 22 02 2002 16 22 26 Installation Instructions and FAQs you require information for creating one consult the Windows 98 or Windows ME user manual 1 Run MSCOMFIG Click Start Run Where it says Open type in msconfig In the msconfig dialog box enable selective startup and deselect Load Startup Group items Click the Advanced button In the Advanced settings place a checkmark beside Enable VGA 640 x 480 x 16 Click OK twice When prompted to Restart the computer click Yes 2 Close down all programs and Terminate amp Stay Resident TSRs programs After your system has rebooted press CTRL ALT DEL This brings up the Close Program dialog box Select each program in the list one at a time and click End Task You will need to press CTRL ALT DEL to bring the Close Program dialog box up after each program is closed Note Do not end task on Explorer or Systray After all TSRs have been closed press CTRL ALT DEL to verify that the only item in the list is Explorer or Systray Click Cancel to close the Close Program dialog box You are now ready to install Follow the directions at the beginning of this document to install CorelDRAW 10 After the installation is complete reverse the above steps to return the computer to its original configuration TSRs will automatically reload when the system is restar
18. Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206382 htm 22 02 2002 16 24 29 Customized workspace and not same when I reopen it Top Navigational Bar Customized workspace and not same when reopen it DocumentID 206383 Revision Date 7 10 2001 4 28 56 PM The information in this document applies to CorelDRAW 10 Problem Added toolbars and buttons and when DRAW is reopened things have shifted Answer Known issue in release 10 410 Corrected in service pack 1 Available for download from http www corel com support ftpsite pub coreldraw draw1 Osuite Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMI
19. Terms of Use Legal Disclaimer Graphics by gt Year 2000 Information F3 COREL Last modified on 10 20 99 http venus corel com cgi bin texis kbsearch arch db kb amp category DRAW1 0 amp results 20 amp jump 60 2 von 2 22 02 2002 16 21 25 76 0 bytes 76 0 bytes 76 0 bytes 76 0 bytes Unable to adjust Line Spacing values in the format text dialogue Top Navigational Bar Unable to adjust Line Spacing values in the format text dialogue DocumentID 205823 Revision Date 11 29 2000 1 42 06 PM The information in this document applies to CorelDRAW 10 Problem When trying to adjust the line spacing of text under Text Format Text manually typing in a new value or clicking on the Up or down arrows have no effect The new value always resets back to the original value Answer Click on the lock beside the apply button so it becomes inactive Then input or adjust the line spacing value then click apply to have the changes take effect Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS I
20. all the components and choosing Arrange Group Now select the grouped object 3 Select the Outline Pen Dialog by pressing F12 or by selecting it by holding down on the Outline Tool flyout in the Toolbox Set the desired width and line style Select Other from Color button The Select Color window will appear Choose Registration Color from the Model drop down list Click OK till and OK The registration mark will now appear on all plates Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206462 htm 22 02 2002 16 26 38 Error Messages Launching Draw 10 Top Navigational Bar Error Messages Launching Draw 10 DocumentID 206463 Revision Date 7 9 2001 4 30 17 PM The information in this document applies to CorelDRAW 10 Problem When launching CorelDRAW 10 the following error messages appear 1 The Kodak Color Management System could not be initialized Color Management functions will
21. and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206259 htm 3 von 3 22 02 2002 16 22 49 File Backup Options Top Navigational Bar File Backup Options DocumentID 206261 Revision Date 6 21 2001 2 04 52 PM The information in this document applies to CorelDRAW 10 There are two methods for creating backup files in CorelDRAW 10 Both options Make Backup on Save and Auto backup may be accessed by clicking Tools Options Work Space Save These options can be invoked individually or concurrently Make Backup On Save A backup file is created when a document is saved more than once during a work session All backup files are given a file name beginning with BACKUP_OF_ and the file name For example the backup of SAMPLE CDR will be named BACKUP_OF_SAMPLE CDR This backup file remains on the hard drive until manually deleted To enable the Backup on Save feature 1 Click Tools Options Work Space Save 2 Enable the Make Backup on Save check box Note You can have the backup files saved in the same folder as the original file This cannot be changed The original file can be restored by opening the backup file
22. are generally CMYK or RGB As a result PMS PANTONE MATCHING SYSTEM colors are unavailable when printing separations There are two ways to assign PMS colors to a raster image using CorelDRAW 10 Answer Converting an Image To Duotone To convert a bitmap image to a duotone in CorelDRAW 10 import the bitmap CPT BMP TIF JPG or GIF Select the bitmap with the pick tool Click on the Bitmap menu and select Mode Duotone To change the color to a Pantone color double click the Pantone color to obtain the Select Color dialogue menu Once the color is selected click OK Click again to exit the Duotone dialogue box The image can also be converted to a Monotone Duotone Tritone or Quadtone using the duotone dialogue box Any combined PMS colors create the appearance of another color space Using 1 bit Monochrome Images To convert an image into a 1 bit monochrome bitmap first import the bitmap into CorelDRAW Click on the Bitmap menu Convert to Black and White 1 bit Select the desired Conversion Method and click OK Now that the image is a 1 bit bitmap select the bitmap with the pick tool Using the outline tool select the desired PMS color Assigning the outline color changes the black pixels in the image and assigning a fill color changes the white or transparent pixels in the image To verify that the bitmap is separating on a Pantone plate click File Print Preview Click the Options button the Separations tab en
23. as defaults for new document and place a checkmark in the styles box OK ONOORWOND Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206493 htm 22 02 2002 16 27 06 Line not found in Registry when launching Corel Texture and or Corel Texture Batcher Top Navigational Bar Line not found in Registry when launching Corel Texture and or Corel Texture Batcher DocumentID 206501 Revision Date 6 26 2001 1 34 06 PM The information in this document applies to CorelDRAW 10 Problem When trying to launch the sub applications Corel Texture and or Corel Texture Batcher an error appears stating Line not Found in Registry or Goodies not Found when logged in as a member of the User group in WinNT 2000 Answer Follow these steps in order to launch the applications successfully 1 Login as administrator 2 Run Regedit 3 Browse to HKEY_CURRENT_USER Software Corel 4 Export the
24. creating cloned text Any attribute changes made to the control text will be updated on the clone s However modifying the content of the control text does not update it s clone s Answer After modifying the content of the control text select it with the pick tool and click on a black color on the palette or the same color as the original control text The cloned text will now show the changes originally made to the content Changing any other attribute of the control text will work as well point size font color Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205854 htm 22 02 2002 16 22 02 Using the Preset fill Icons for percentages of Black causes CARM Top Navigational Bar Using the Preset fill lcons for percentages of Black causes CARM DocumentID 205893 Revision Date 5 7 2001 10 01 09 AM The information in this document applies to CorelDRAW 10 Pr
25. following keys to the root of C Corel Texture Texture Batcher 5 Log off Administrator and login as a user 6 Execute the two exported reg keys One thing to note every user who s a member of the User group will need to double click the reg files in order to run the application Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_ 206501 htm 22 02 2002 16 27 12 Error When Attempting to Launch Corel Texture Top Navigational Bar Error When Attempting to Launch Corel Texture DocumentID 206508 Revision Date 7 3 2001 10 07 30 AM The information in this document applies to CorelDRAW 10 Problem When attempting to launch Corel Texture user receives error Entries Missing in System Registry or Goodies not found Answer 1 Login as administrator 2 From the Start menu choose Run 3 Type in Regedit 4 Browse to HKEY CURRENT_USER Software Corel 4 E
26. if this number cannot be located Q After installing CorelDRAW10 my system fonts or fonts in other programs are messed up did a full installation with everything selected How can fix this A If you installed all of the fonts that are included with CorelDRAW10 or the total font count on the system is over 500 refer to Fax On Demand document 2102 Q How can correct errors reading the CD ROM when installing CorelDRAW 10 A Ensure that you are using 32 bit Windows drivers for your CD ROM Inspect the underside of the CD ROM for fingerprints dust or scratches If you find any dust or fingerprints clean the CD ROM with a CD ROM cleaning kit or wipe the CD ROM with a soft lint free cloth from the center hub to the outer edge of the CD ROM Do not wipe in a circular motion Q How do perform a Network installation A A Network Installation requires additional licenses for the workstations that you will be installing the package to Contact your local Corel Approved Reseller to purchase additional licenses http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206250 htm 3 von 4 22 02 2002 16 22 26 Installation Instructions and FAQs Q Do have to install CorelDRAW 10 over my previous version of CorelDRAW A No do not install CorelDRAW 10 over any previous version of CorelDRAW Ensure that you install it to an entirely different folder to ensure a successful installation Q When installed CorelDRAW 10 CD ROM 1 was the onl
27. kbsearch db kb amp category DRAW1 0 amp results 20 amp jump 0 1 von 3 22 02 2002 16 20 40 Welcome to Corel Support Support Services Online Services Knowledgebase Installation Instructions and FAQs The steps in this document should be followed if any difficulties are encountered during or immediately after the installation of CorelDRAW 10 Note It is important http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206250 htm Default Installation Files Typical installation option All other items are available by running the Custom installation option and the Add Component installation Answer CorelDRAW Program http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206251 htm Attune FAQs Attune is a revolutionary service that provides you with targeted Intelligram messages to help you avoid common computer problems Attune may also let you know when http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206252 htm Installing True Type Fonts True Type fonts in any application running in Windows 98 2000 environments True Type fonts are installed to and accessed from the WINDOWS FONTS folder in Windows http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206253 htm Using Multilingual Fonts Extra fonts are provided on the CD Both True Type and Type 1 are provided on CD 1 in the Fonts folder and on CD 2 in the Extra Fonts folder Answer Installing Multilingual http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206254 h
28. may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206464 htm 22 02 2002 16 26 48 Creating Transparencies in Animated GIFS with PhotoPAINT10 Top Navigational Bar Creating Transparencies in Animated GIFS with PhotoPAINT10 DocumentID 206467 Revision Date 6 20 2001 4 15 24 PM The information in this document applies to CorelDRAW 10 Problem Animated Gif files created in PhotoPAINT or RAVE can have transparent backgrounds To do this follow the procedure listed below Answer 1 Create or Open the animated GIF in Corel PhotoPAINT 10 2 Select File Export The Export an Image to Disk dialog will appear Select GIF CompuServe Bitmap from the Files of Type Click Save The GIF89 Animation options will appear 3 To create a transparency select the Frame Settings tab Select a frame on the left hand side and select Image Color on the right Click on Select Color Choose the color that should be transparent using the Eyedropper tool and click OK Click on Apply All THIS MUST BE DONE FOR ALL FRAMES TO HAVE THE TRANSPARENCY WORK CORRECTLY THE TRANSPAREN
29. subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206509 htm 2 von 2 22 02 2002 16 27 24 No Writing Tools Installed error message when choose Spell Checker Top Navigational Bar No Writing Tools Installed error message when choose Spell Checker DocumentID 206523 Revision Date 7 12 2001 11 46 49 AM The information in this document applies to CorelDRAW 10 Problem After clicking on Text Writing Tools and anything below it an error appears stating No Writing Tools have been Installed Answer Click on Start Programs CorelDRAW10 Setup and Notes Corel Uninstaller Choose writing tools below CorelDRAW10 Click Next and continue through the uninstaller After the uninstallation is complete reboot the computer After rebooting verify that the x Program Files Corel Shared directory is gone If it is not gone this may mean that another Corel program has installed writing tools and they may need to be uninstalled If it is gone then put your CD 1 in and start the installation Choose Add Components Click Next past the screen showing Main Applications On the next screen choose English and change the default language to English Continue through the installation After the installation launch DRAW and see if the writing t
30. the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206437 htm 22 02 2002 16 26 05 Service pack One will not apply if trial version of Draw 10 was ever installed Top Navigational Bar Service pack One will not apply if trial version of Draw 10 was ever installed DocumentID 206438 Revision Date 6 11 2001 4 11 48 PM The information in this document applies to CorelDRAW 10 Problem Trial version of DRAW10 has been installed and successfully uninstalled DRAW10 retail package has been installed and Service pack one will not install Answer Delete the following two files Windows VBox Licenses CorelDRAW10_10 4DDB lic and Windows VBox Installers Corel_ CorelDRAW10_10 1_ en us Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTE
31. 0 Problem Performance of CorelDRAW 10 deteriorates as a result of working with text Symptoms include the following Application menus do not respond immediately Various text editing problems Frequent system crashes when editing text Answer Corel has fixed this issue in Service Pack 2 for CorelDRAW 10 To download this fix please visit the following URL http www corel com support ftpsite pub coreldraw draw1 Osuite index htm Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206827 htm 22 02 2002 16 28 45 Deploying CorelDRAW 10 over a network Top Navigational Bar Deploying CorelDRAW 10 over a network DocumentID 206829 Revision Date 1 15 2002 12 10 06 PM The information in this document applies to CorelDRAW 10 Problem CorelDRAW 10 can be deployed over a network Answer For information on how to deploy CorelDRAW 10 over a network please con
32. 0 2001 5 20 15 PM The information in this document applies to CorelDRAW 10 Problem The following list displays all the components available for installation with CorelDRAW 10 Graphics Suite An asterisk indicates that the component is part of the Typical installation option All other items are available by running the Custom installation option and the Add Component installation Answer CorelDRAW Program Files Help Files Tutors and Examples Outlines amp Fills Scripts Presets Tiles and Frames File Associations Corel PHOTO PAINT Program Files Help Files Tutors and Examples Scripts and Script Effects Tiles and Frames File Associations Corel R A V E Program Files Help Files Tutors Graphics Utilities Corel CAPTURETM Corel TEXTURETM Corel TEXTURETM Batcher CorelTRACETM Aveo AttuneTM Thumbnail Display Plug In Filters Productivity Tools http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_ 206251 htm 1 von 2 22 02 2002 16 22 30 Default Installation Files Bitstream Font NavigatorTM 4 0 Corel BAR CODE Wizard Service Bureau Wizard Duplexing Wizard Labels Microsoft Visual Basic for Applications 6 2 amp Microsoft Internet Explorer 5 0 Digital Signatures using Microsoft Internet Explorer 5 0 Microsoft Visual Basic Application 6 2 Import Export File Types Bitmap File Types CPT TIF O S BMP WI BMP GIF PCX JPG SCT PSD
33. 1 Osuite index htm Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_ 206401 htm 22 02 2002 16 24 55 When typing text each time hitting the space bar the pick tool is activated Top Navigational Bar When typing text each time hitting the space bar the pick tool is activated DocumentID 206402 Revision Date 6 20 2001 4 21 11 PM The information in this document applies to CorelDRAW 10 Problem Each time the space bar is hit the application toggles the space bar with the pick tool Answer Select View and remove the check from Enable Rollover Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publi
34. 10 DO NOT LAUNCH 5 Reboot into Safe Mode 6 Install SP1 7 Reboot into normal windows Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206473 htm 22 02 2002 16 26 57 When installing DRAW 10 error appears stating Setup did not complete Top Navigational Bar When installing DRAW10 error appears stating Setup did not complete DocumentID 206480 Revision Date 7 30 2001 10 46 55 AM The information in this document applies to CorelDRAW 10 Problem When installing Draw 10 this internal error comes up The only option is OK then the message Setup did not complete you must try again Answer Uninstall the Trial version of Draw 10 from the system using the Add Remove Programs in the Control Panel Go into the Windows Explorer and ensure that all the files from the Trial version of Draw 10 are gone Reboot Install the full version of Draw 10 Details If t
35. 2002 16 25 04 Draw10 Produces CARM When Opening Files Top Navigational Bar Draw10 Produces CARM When Opening Files DocumentID 206410 Revision Date 7 10 2001 4 33 21 PM The information in this document applies to CorelDRAW 10 Problem When opening files of type CDR the Corel Application Recovery Manager CARM appears stating that the application has become unstable Answer Download and install the latest driver for your Printer If you have a PostScript printer download the PostScript driver as well as the PCL and make the PostScript Driver the default printer To change default printers open the Printers folder in My Computer and right click on the printer that you wish to set as default From the sub menu select Set As Default Details This problem often occurs when using an HP 4000 or 5000 series printer with a PCL driver installed Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbd
36. 4 52 56 PM The information in this document applies to CorelDRAW 10 Problem After the installation of Service Pack One the creation of a new document or the selecting of an object in an existing file gives an unexpected condition 5002 Answer Reset the workspace back to the factory defaults Close the application Hold the F8 key and relaunch the application Hold the F8 key until a message appears saying Are you sure you want to overwrite the current workspace with the factory defaults Click Yes to this message and release the F8 key If the same error appears check the number of installed fonts and number of temp files To check fonts click Start Settings Control Panel Double click Fonts In the bottom left hand corner it will state how many fonts are installed Windows 95 98 and ME have approximately a 500 font limit If the number of installed fonts is greater then 500 there may be some corruption Check for individual font corruption by clicking on the View menu and Details Click on the word SIZE at the top of the third column This will sort the fonts by size If any font has a size of OKb then it is corrupt and should be removed To check for temp files Click Start Find Files or Folders or Start Search for Files or Folders Type in tmp and change the lookin to My Computer or Local Disks Click Find Now Delete all the files it finds Details Unexpected Conditions can be caused by corruption in the works
37. 5 Click on the Advanced button 6 Highlight Open under the Actions section and click Edit 7 In the Editing for Action dialogue box you will need to add the following information Action Open Application used to perform Action x programfiles corel graphics10 programs coreldrw exe 1 where x is the letter of the drive the program is installed on Put a check mark in Use DDE DDE message O 1 Application coreldrw_MOS DDE Application Not Running Leave this field empty Topic System 9 Click OK then OK then Close Double clicking on a file in Explorer will now open multiple files in one instance of CorelDRAW Corel R A V E 1 Double click the My Computer icon on the desktop 2 Click on View gt Folder Options Windows 98 Tools gt Folder Options Win ME 2000 or View gt http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206270 htm 1 von 3 22 02 2002 16 24 19 Digital data exchange DDE Options Win NT 3 Click the File Types tab 4 Under the Registered File Types dialogue box select CLK Corel R A V E 1 0 5 Click on the Advanced button 6 Highlight Open under the Actions section and click Edit 7 In the Editing for Action dialogue box you will need to add the following information Action Open Application used to perform Action x ProgramFiles Corel Graphics10 Programs Rave exe 1 where x is the letter of the drive the program is installed on Put a check mark in Use DDE
38. After opening a backup file it is recommended that the file be saved under a new file name Auto Backup This option backs up a file at scheduled intervals preset by the CorelDRAW user The automatic timer is activated the instant document contents change and a file is generated with the file name AUTOBACKUP_OF_ Auto back up files are removed from the hard drive when CorelDRAW is closed or when the document is saved The auto backup file remains on the hard drive if the application is closed down abnormally If this occurs try the following steps 1 Close all applications and restart the computer 2 Using Windows Explorer locate the folder where the auto backup file is located By default this will be the same folder where the original file was saved 3 Click the file and click File Rename 4 Type a new file name for this file 5 Launch CorelDRAW and open the file To enable the Auto Backup feature perform the following steps 1 Click Tools Options Work Space Save 2 Enable the Auto Backup check box 3 Enter an interval time in the number list box from 1 to 120 minutes 4 By default the folder in which the original file is saved is used for the auto backup file This can be changed by enabling the Always Backup check box and selecting another folder Note It is possible to disable both backup features but it is not recommended http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206261 htm 1 von 2 22 02 2002
39. Anti Virus software program utilities etc Answer To correct this issue do the following 1 Uninstall CorelDRAW 10 Graphic Suite 2 Reboot your computer 3 Reinstall the application 4 Reboot into Safe Mode 5 Install Service Pack 1 in Safe Mode 6 Reboot into Windows Details Alternatively you can turn off all background processes prior to installing Service Pack 1 rather than booting into Safe Mode Safe Mode simply insures that all unnecessary processes which may interfere with the installation routine are no longer running Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206826 htm 22 02 2002 16 28 40 Performance issues as a result of editing text in CorelDRAW 10 Top Navigational Bar Performance issues as a result of editing text in CorelDRAW 10 DocumentID 206827 Revision Date 1 14 2002 1 39 35 PM The information in this document applies to CorelDRAW 1
40. CODE WIZARD http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206432 htm lt lt previous 1234 next gt gt http venus corel com cgi bin texis kbsearch arch db kb amp category DRAW1 0 amp results 20 amp jump 20 2 von 3 22 02 2002 16 20 59 Welcome to Corel Support Support Services Online Services Knowledgebase gt gt SCORE PRODUCTS gt SUPPORT SHOP gt contactus News EVENTS SEARCH Welcome to Corel Support Support Services Online Services SUPPORT SERVICES Options Professional Premium Online Services Telephone Faxon Demand Tips amp Tricks Features in Action Online Services Corel s Knowledgebase Search This category only O The entire knowledge base lt lt previous 1234 next gt gt Service pack 1 will not install if a beta version was previously installed ive Applies to users with Draw 10 425 beta sp1 applied When applying service pack 1 errors appear 0 bytes pertaining to certain files not being the right version and the installation http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206437 htm Service pack One will not apply if trial version of Draw 10 was ever installed 76 Trial version of DRAW10 has been installed and successfully uninstalled DRAW10 retail package 0 bytes has been installed and Service pack one will not install Answer Delete http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206438 htm Treating Objects as filled wh
41. DDE message O 1 Application rave_ MOS DDE Application Not Running Leave this field empty Topic System 9 Click OK then OK then Close Double clicking on a file in Explorer will now open multiple files in one instance of Corel R A V E Corel PHOTO PAINT 1 Double click the My Computer icon on the desktop 2 Click on View gt Folder Options Windows 98 Tools gt Folder Options Win ME 2000 or View gt Options Win NT 3 Click the File Types tab 4 Under the Registered File Types dialogue box select CPT Corel Photo Paint 10 0 Image 5 Click on the Advanced button 6 Highlight Open under the Actions section and click Edit 7 In the Editing for Action dialogue box you will need to add the following information Action Open Application used to perform Action x ProgramFiles Corel Graphics10 Programs photopnt exe dde where x is the letter of the drive the program is installed on Put a check mark in Use DDE DDE message O 1 Application Leave this field empty DDE Application Not Running Leave this field empty Topic Leave this field empty 9 Click OK then OK then Close Double clicking on a file in Explorer will now open multiple files in one instance of Corel PHOTO PAINT Details http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206270 htm 2 von 3 22 02 2002 16 24 19 Digital data exchange DDE Product specifications packaging technical support and information Speci
42. DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206413 htm 22 02 2002 16 25 28 TARGA BITMAP TGA EXPORT SAVES IN ENHANCED MODE EVEN THOUGH NORMAL IS SELECTED Top Navigational Bar TARGA BITMAP TGA EXPORT SAVES IN ENHANCED MODE EVEN THOUGH NORMAL IS SELECTED DocumentID 206414 Revision Date 6 20 2001 4 30 47 PM The information in this document applies to CorelDRAW 10 Problem This issue relates to the targa bitmap export for versions 8 9 and 10 of CorelDRAW Files exported in normal mode are still saved in enhanced mode Follow these steps to resolve the issue when saving files of this type Answer 1 Click File Export Select TGA Targa Bitmap from Files of Type Click Export and the Bitmap Export dialog will appear 2 Deselect Transparent Background This feature is not supported when exporting to normal mode Click on OK 3 In the TGA Export dialog select Normal for the File Format 4 The file will now be saved in normal mode Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subjec
43. IABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206463 htm 2 von 2 22 02 2002 16 26 44 TEXT SWITCHES AUTOMATICALLY TO ENGLISH US WHEN TYPING TEXT IN CorelDRAW 10 Top Navigational Bar TEXT SWITCHES AUTOMATICALLY TO ENGLISH US WHEN TYPING TEXT IN CorelDRAW 10 DocumentID 206464 Revision Date 6 20 2001 10 04 34 AM The information in this document applies to CorelDRAW 10 Problem When a language other than English US is selected as default in Input Locales under the Windows Regional Options CorelDRAW 10 automatically reverts back to English when clicking on the document after selecting the Text tool To resolve this issue follow the following procedure Answer 1 Ensure that the default language is selected correctly in Windows Regional Options 2 Open CorelDRAW 10 select Tools Options On the left hand side of the screen click on the word Text within the Workspace expandable menu On the right hand side of the screen remove the checkmark from Auto Keyboard Switching Click OK to close the Options Window 3 Now when selecting the Text tool it will use the default language Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions
44. IERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206424 htm 22 02 2002 16 25 51 Viewing in Wireframe or editing a Barcode in CorelDRAW 10 Top Navigational Bar Viewing in Wireframe or editing a Barcode in CorelDRAW 10 DocumentID 206432 Revision Date 6 20 2001 4 33 12 PM The information in this document applies to CorelDRAW 10 Problem In CorelDRAW 10 a barcode is inserted as an OLE Object which cannot be edited once created and will not display in wireframe view To create a barcode that can be modified ie ungrouping the lines or changing the color follow these steps Answer 1 Click on Start Programs CorelIDRAW 10 Productivity Tools or click on the Application Launcher on the main toolbar in CorelDRAW 10 and select the Corel BARCODE WIZARD 2 Follow the steps to create the barcode Once completed choose Yes when prompted to copy the barcode to the clipboard 3 In your document select Edit Paste Special The Paste Special dialog will appear Select Paste and choose Picture Metafile Click OK and the barcode will appear in the document 4 The barcode may now be ungrouped from the Arrange menu It is also viewable in wireframe and can have the lines and colors modified Details Product specifications packaging technical support and information Specifications refer to theUnited States retail
45. MAC Go the Apple Menu click on Control Menu click on Memory In the Memory box click to turn on Virtual Memory Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206726 htm 22 02 2002 16 28 14 How to overright current workspace with the factory defaults in DRAW10 MAC Top Navigational Bar How to overright current workspace with the factory defaults in DRAW10 MAC DocumentID 206727 Revision Date 10 11 2001 12 23 59 PM The information in this document applies to CorelDRAW 10 Problem Sometimes it is necessary to go back to the default workspace ie a menu bar or toolbar disappears or general corruption of the workspace Answer Launch CorelDraw10 MAC Right away press and hold the SHIFT key A message will appear prompting to overright the current workspace with the factory defaults Release the SHIFT key and choose yes Details Product specifications pack
46. ORT SHOP CONTACTUS NEWS EVENTS SEARCH Welcome to Corel Support Support Services Online Services SUPPORT SERVICES Options Professional Premium Online Services Telephone Faxon Demand Tips amp Tricks Features in Action Online Services Corel s Knowledgebase Search This category only O The entire knowledge base lt lt previous 1234 Converting Scripts to Draw 10 Draw 10 now uses VBA and one way to convert scripts from Draw 9 to Draw 10 VBA is to change the lines WithObject CorelDRAW Automation 9 to WithObject CorelDRAW Automation 10 http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206584 htm Location of shared file is greyed out when installing Draw10 Upgrade Corel product was installed to a drive letter that since then has been removed and replaced by a CDROM or CDRW drive The applications must be uninstalled and the http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206586 htm Monotone bitmap will not print when printing separations After having converted an image to a Monotone bitmap the image does not show up when printing separations Answer The image must be converted to a bitmap without http kb corel com kbdocs IUNKNOWN DRAW10 DRAW10_206620 htm Cannot install Draw10MAC on the OSX partition of a dual boot system When installing Draw10 MAC under the OSX partition of a dual boot system various errors will appear Answer Workaround Reboot to another part
47. OTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_ 206271 htm 22 02 2002 16 24 25 CorelDRAW fails to launch hourglass disappears Top Navigational Bar CorelDRAW fails to launch hourglass disappears DocumentID 206382 Revision Date 5 7 2001 11 49 28 AM The information in this document applies to CorelDRAW 10 Problem When launching CorelDRAW the hourglass appears for a few seconds then disappears Answer Do a search for msvert dll on your hard drive and rename all instances of this file to msvcrt old except for the one in the c windows system Copy msvert dll from the system32 folder on the CD and paste it in c Reboot into DOS not dos shell and type in the following hitting enter after each line cd windows system ren msvcrt dll msvcrt old copy c msvert dll Reboot into Windows Hold the F8 key and launch CorelDRAW Release when you re prompted to overwrite the workspace Click yes to restore the workspace to factory default Details If running NT on an NTFS partition you will not be able to do this as NT does not have native DOS If NT is on a FAT partition you can use a Windows 98 boot disk to get into DOS For Windows 2000 you will need to reboot into safemode with Command Prompt Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only
48. OWN DRAW10 DRAW10_206423 htm 22 02 2002 16 25 45 How to change file association in Windows Top Navigational Bar How to change file association in Windows DocumentID 206424 Revision Date 6 11 2001 4 06 53 PM The information in this document applies to CorelDRAW 10 Problem After the installation of a new application all the graphics files ie jpg tif gif bmp are associated with the new application Answer Click Start Find Files or Folders or Start Search for files or folders Type in jpg or the desired file extension ie bmp tif gif etc that needs to be changed In the search results single click a file then hold the shift key and right click that same file Choose Open With from the menu that appears Choose the application that should open this file type ie Internet Explorer Microsoft Paint etc Place a check in the box beside Always use this program to open these files Click OK Now all files of that extension will open with that application Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPL
49. S LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205823 htm 22 02 2002 16 21 40 Unable able to apply more than one decimal place for an outline thickness Top Navigational Bar Unable able to apply more than one decimal place for an outline thickness DocumentID 205827 Revision Date 12 5 2000 3 15 39 PM The information in this document applies to CorelDRAW 10 Problem In the Outline Pen Dialogue window and on the Outline Tab in the Properties Docker window it will only keep an input of one decimal place All other decimal places will be rounded off Answer Select the object on the property bar input the outline width Entering a value here will allow as many decimal places that the Drawing Precision is set for The Drawing Precision setting can be altered under Tools Options Edit Details Note For Multiple Object selections the option on the property bar is not avialable To add this Click Tools Customization then select commands For the category select Fill and Outline Scroll down to Outline Width and drag it off of the window Click O K then drag the new toolbar up beside the property bar at the top The Properties Docker by default is set to Auto Apply all changes If you input an outline thickness on the porperty bar to obtain more decimal places then Open the Properties Docker and switch to the
50. T 10 2 Using the Mask Tool create a Mask around the desired area Note If using a Clipping Path it is not necessary to create a Mask 3 Click File Save As Save the file as EPS Encapsulated PostScript 4 In the EPS Export Options enable the Include Thumbnail Clip to Mask and Discard Image Data Outside Clipping Region 5 Click OK 6 Run CorelDRAW 10 7 Import the EPS file using the Adobe PostScript Interpreted filter PS Note If the EPS file is imported as Encapsulated Postscript the background will not be transparent on the display This is only the header of the EPS file The background will print as transparent when output to a Postscript device Mask Method 1 Open the image in Corel PHOTO PAINT 10 2 Using the Mask Tool create a Mask around the desired area 3 Click File Save As Save the file to any one of the following popular file formats CPT Corel PHOTO PAINT TIF TIF Bitmap 4 When importing this file into CorelDRAW 10 the unmasked area of the image will be transparent Removing Bitmap Backgrounds Using the Shape Tool Bitmaps that are imported into CorelDRAW 10 can have their rectangular backgrounds cropped by editing their shape using the Shape tool 1 Import the bitmap into CorelDRAW 10 2 Click the bitmap with the Pick tool and click the Shape tool Nodes will appear around the bitmap 3 Click and drag a node with the Shape tool This will bend and crop the image http
51. T COLOR MUST BE THE SAME IN ALL FRAMES Once done click OK Do not open the GIF back into PHOTO PAINT it will not display the transparency and the GIF will lose the transparency if saved This file may be viewied in a Web Browser or HTML editor Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206467 htm 22 02 2002 16 26 52 Cannot Apply Bitmap Effects since installing SP1 Top Navigational Bar Cannot Apply Bitmap Effects since installing SP1 DocumentID 206473 Revision Date 8 4 2001 9 27 53 AM The information in this document applies to CorelDRAW 10 Problem After installing Service Pack One and trying to apply bitmap effects in DRAW or PHOTO PAINT 10 user gets error Crifx100 cannot create effect component Answer 1 Download SP1 2 Uninstall DRAW 10 3 Go into Windows Explorer and make sure the Graphics 10 folder is gone If not delete it 4 Re install DRAW
52. T SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206419 htm 22 02 2002 16 25 39 Draw 10 caused an Invalid Page Fault in module cdrrip100 dll Top Navigational Bar Draw 10 caused an Invalid Page Fault in module cdrrip100 dll DocumentID 206423 Revision Date 6 11 2001 4 35 51 PM The information in this document applies to CorelDRAW 10 Problem Draw 10 will not open and gives the error Draw 10 has caused an Invalid Page Fault in module cdrrip100 dll Answer Set a postscript printer driver as the windows default printer If no postscript printer is installed try installing a level one postscript device such as the Apple Laser Writer Pro 630 from the windows CD and set it as default Details Problem exists with various PCL driver that are set as default Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKN
53. TED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206383 htm 22 02 2002 16 24 34 Opening closing dockers cause CorelDRAW 10 to crash Top Navigational Bar Opening closing dockers cause CorelDRAW 10 to crash DocumentID 206384 Revision Date 5 7 2001 11 47 13 AM The information in this document applies to CorelDRAW 10 Problem Opening closing any docker results in an illegal operation in a DRV module Answer Certain video drivers are known to cause CorelDRAW 10 to crash when dockers are manipulated To correct this perform one of the following 1 Update your video driver 2 Reduce the hardware acceleration for your video card Win 98 ME and 2000 only Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206384 htm 22 02 2002 16 24 39 Memory error when customize Bi
54. To access a Symbol in CorelDRAW 10 1 Click Window Dockers Symbols and Special Characters or click Tools Symbols and Special http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206267 htm 1 von 3 22 02 2002 16 23 49 Accessing Clipart and Symbols Characters 2 The Symbols and Special Character Docker will appear Locate the appropriate category for the desired symbol in the list box 3 Drag and drop the symbol onto the document Templates Templates are found on CD ROM 1 in the TEMPLATE folder 1 Click File New From Template 2 Click the Browse tab 3 Choose the CD ROM drive 4 Double click the Corel folder Graphics10 DRAW and Template 5 You now have access to the Booklet FullPage Label Sidefold and Web Template folders Photos and Bitmaps Photos and Bitmaps can be found on CD ROM 8 Photos are in the PHOTOS folder and the Bitmaps are located under the IMAGES folder To access them click File Import and click Wavelet Compressed Bitmap WI for photos and TIFF Bitmaps TIF for all other bitmaps in the Files of Type list box Refer to the Clipart manual to properly associate the desired image to its respective category Floating Objects Floating Objects are found on CD ROM 3 in the OBJECTS folder To access them they must be opened in Corel PHOTO PAINT or imported into CorelDRAW 3D Models 3D Models are located on CD ROM 3 They can be opened in CorelDRAW and in PHOTO PAINT with the 3DM file filter
55. UNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206586 htm 22 02 2002 16 27 56 Monotone bitmap will not print when printing separations Top Navigational Bar Monotone bitmap will not print when printing separations DocumentID 206620 Revision Date 8 24 2001 11 50 21 AM The information in this document applies to CorelDRAW 10 Problem After having converted an image to a Monotone bitmap the image does not show up when printing separations Answer The image must be converted to a bitmap without a transparent background The transparent background is what is preventing the image from appearing on a separations plate Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206620 htm 22 02 2002 16 28 00 Cannot install Draw 1 OMAC on the OSX partition of a dual boot system Top Navigational Bar Cannot i
56. W10 DRAW10_206413 htm TARGA BITMAP TGA EXPORT SAVES IN ENHANCED MODE EVEN THOUGH NORMAL IS 76 SELECTED 0 bytes This issue relates to the targa bitmap export for versions 8 9 and 10 of CorelDRAW Files exported in normal mode are still saved in enhanced mode Follow these http kb corel com kbdocs IUNKNOWN DRAW10 DRAW10_206414 htm Dialog boxes appear to be in a different language ai Click File Save As and the text in the dialog box is not in English ie German Japanese 0 bytes Answer Rename mfc42loc dll to Mfc42loc old Documented in Microsoft s http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206419 htm Draw 10 caused an Invalid Page Fault in module cdrrip100 dll 76 Draw 10 caused an Invalid Page Fault in module cdrrip100 dll DocumentID 206423 Revision 0 bytes Date 6 11 2001 4 35 51 PM The information in this document applies to CorelDRAW http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206423 htm How to change file association in Windows i After the installation of a new application all the graphics files ie jpg tif gif bmp are associated 0 bytes with the new application Answer Click Start Find Files http kb corel com kbdocs IUNKNOWN DRAW10 DRAW10_206424 htm Viewing in Wireframe or editing a Barcode in CorelDRAW 10 76 Click on Start Programs CorelIDRAW 10 Productivity Tools or click on the Application Launcher 0 bytes on the main toolbar in CorelDRAW 10 and select the Corel BAR
57. Welcome to Corel Support Support Services Online Services Knowledgebase gt gt SCORE PRODUCTS gt SUPPORT SHOP CONTACTUS NEWS EVENTS SEARCH Welcome to Corel Support Support Services Online Services SUPPORT SERVICES Options Professional Premium Online Services Telephone Faxon Demand Tips amp Tricks Features in Action Online Services Corel s Knowledgebase Search This category only O The entire knowledge base 1234 next gt gt Unable to adjust Line Spacing values in the format text dialogue i Unable to adjust Line Spacing values in the format text dialogue DocumentID 205823 Revision 0 bytes Date 11 29 2000 1 42 06 PM The information in this document applies http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205823 htm Unable able to apply more than one decimal place for an outline thickness 76 i Unable able to apply more than one decimal place for an outline thickness DocumentID 205827 0 bytes Revision Date 12 5 2000 3 15 39 PM The information in this document http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205827 htm Some of the Full color pattern fills do not fill and display properly 7 Some of the Full color pattern fills do not fill and display properly DocumentID 205852 Revision 0 bytes Date 5 7 2001 9 58 04 AM The information in this document applies http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205852 htm Where is the Special Fill Do
58. XCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206438 htm 22 02 2002 16 26 09 http kb corel com kbdocs UNKNOWN DRAW 10 DRAW 10_206440 htm Top Navigational Bar Treating Objects as filled while in Wireframe view DocumentID 206440 Revision Date 6 11 2001 4 42 20 PM The information in this document applies to CorelDRAW 10 While working in Wireframe view no items can be selected without verifying the pick tool is on the outline before selecting Click Tools Options click the beside Toolbox and click on Pick Tool Put a check in Treat all objects as filled Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206440 htm 22 02 2002 16 26 13 Unexpected Condition 5002 units 1782 or 1670 Top Navigational Bar Unexpected Condition 5002 units 1782 or 1670 DocumentID 206446 Revision Date 6 11 2001
59. able Print Separations and click OK Each of the separations should now be displayed Note This method will not work if the image is converted to Black and White by selecting Mode Black and White You must convert the image using Convert to in order to achieve the desired effect Creating a Duotone Image in Corel PHOTO PAINT 10 Open the bitmap image in Corel PHOTO PAINT 10 Click on Image Mode Duotone 8 bit Select the Type Monotone Duotone Tritone or Quadtone Double click the Pantone color name to open the Select Color dialog Select the desired Pantone Matching System color and click OK Click OK again to complete the conversion Now save the file to the EPS file format Click on File Save As enter a filename select Encapsulated PostScript EPS from the Save as Type list and click the Save button The file is now ready to be imported into CorelDRAW 10 or another application that supports the EPS file http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206268 htm 1 von 2 22 02 2002 16 23 54 Assigning PANTONE MATCHING SYSTEM Colors to Raster Images format Use the Encapsulated PostScript EPS filter in CorelDRAW 8 to import the file Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are corre
60. aging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206727 htm 22 02 2002 16 28 20 Cannot launch CorelDRAW 10 after installing service pack 2 Top Navigational Bar Cannot launch CorelDRAW 10 after installing service pack 2 DocumentID 206800 Revision Date 1 16 2002 11 35 54 AM The information in this document applies to CorelDRAW 10 Problem After installing service pack 2 the following files get truncated CorelDRW100 dll to CORELD 1 dll and cdrfnt100 dll to CDRFNT 1 dll This will prevent the launch of CorelDRAW 10 PHOTO PAINT 10 and R A V E 1 0 This may occur as a result of Norton Utilities being resident in memory during the installation of service pack 2 Answer To correct this rename the following files in the programs directory x program files corel graphics10 programs CORELD 1 dll to CorelDRW100 dll CDRFNT 1 dll to cdrfnt100 dll Details In addition to the two previously mentioned file
61. arent background When saving the file be sure the image has been converted to 256 colors and saved as CompuServe GIF In Corel PHOTO PAINT 10 1 Open or Import the bitmap image 2 Click File Export 3 Click CompuServe GIF format from the Files of Type list box and type a file name 4 Click Save 5 Select Image Color click on the EyeDropper Tool and click the area in the Original GIF Export dialogue box that you want transparent 6 Click OK 7 Import or Open in DRAW to view the resulting image Q Where is the MPG export file format in PHOTO PAINT 10 A The file format MPG has been omitted from PHOTO PAINT 10 Q Where are the MOV and QTVR filters in PHOTO PAINT 10 A You must install Apple QuickTime 3 0 2 or greater An installer for QuickTime 4 1 2 is included on the CD It is accessible through the Intro exe executable at the root of the CD 1 Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdo
62. ations claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206252 htm 22 02 2002 16 22 34 Installing True Type Fonts Top Navigational Bar Installing True Type Fonts DocumentID 206253 Revision Date 6 20 2001 5 24 30 PM The information in this document applies to CorelDRAW 10 Problem The True Type font engine is an integral component of Windows 98 2000 Therefore a third party font manager is not required to use True Type fonts in any application running in Windows 98 2000 environments True Type fonts are installed to and accessed from the WINDOWS FONTS folder in Windows 98 2000 CorelDRAW 10 applications will access True Type fonts from this location Answer Note Installing an excessive number of Fonts 500 may tax system resources hinder performance and affect the operation of Windows There are two options for installing True Type Fonts in Windows 98 2000 or Windows NT Fonts may be installed using the Fonts icon within the Control Panel or through the Bitstream Font Navigator Installing True Type Fonts to Windows 98 2000 or Windows NT 1 Click Start Set
63. be disabled 2 A necessary profile could not be loaded Please reinstall the application to repair this problem 3 Texture file CORELDRW TXR could not be found 4 CdrCpr100 dll could not be found in the programs directory this error will occur twice DRAW 10 will launch at this point however when creating a new document you will get the following 1 Unexpected condition encountered Condition 5000 DRAWDOC2 0395 2 Failed to create new document this error will occur twice If you try to open a document in DRAW you will get the following 1 There are no import filters available Answer Place CorelDRAW 10 CD 1 in the CD ROM and search the disk for corelapp ini without quotes The file is found in Corel Graphics10 Config Copy this file from the CD and Paste into Corel Graphics10 Config DIR on the hard drive which contains the CorelDRAW application eg C Program Files Relaunch CorelDRAW Details http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206463 htm 1 von 2 22 02 2002 16 26 44 Error Messages Launching Draw 10 Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE L
64. cation but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206402 htm 22 02 2002 16 25 00 Error 1310 when installing on NT Top Navigational Bar Error 1310 when installing on NT DocumentID 206409 Revision Date 6 11 2001 3 09 18 PM The information in this document applies to CorelDRAW 10 When installing Draw 10 on the NT operating system multiple instances of Error 1310 will appear Select Ignore to each of these messages then before restarting the computer re apply the last service pack for NT To find out which service pack is installed on NT Click Start Run and type winver and click OK Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206409 htm 22 02
65. cker 76 Unable to locate the Special fill docker window Unable to apply an existing fill to a new object 0 bytes Answer This docker has been replaced by a feature called Copy http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205853 htm Cloned text not updating properly ive Cloned text not updating properly DocumentID 205854 Revision Date 5 7 2001 10 00 42 AM 0 bytes The information in this document applies to CorelDRAW 10 Problem After http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205854 htm Using the Preset fill Icons for percentages of Black causes CARM 76 Using the Preset fill Icons for percentages of Black causes CARM DocumentID 205893 Revision 0 bytes Date 5 7 2001 10 01 09 AM The information in this document applies http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205893 htm Unable to add a space while editing text 7 aa Unable to add a space while editing text DocumentID 205917 Revision Date 5 7 2001 10 05 06 0 bytes AM The information in this document applies to CorelDRAW 10 Problem http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205917 htm Uninstalling CorelDRAW 10 from Windows 95 76 Create a Startup Disk to allow recovery of basic computer functions in the event of a complete 0 bytes computer failure The Startup Disk may be created during the Windows http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206249 htm HOME http venus corel com cgi bin texis kosearch
66. cs UNKNOWN DRAW10 DRAW10_206265 htm 2 von 2 22 02 2002 16 23 12 Printing FAQs Top Navigational Bar Printing FAQs DocumentID 206266 Revision Date 6 21 2001 4 04 58 PM The information in this document applies to CorelDRAW 10 Problem The following document contains frequently asked questions about printing and CorelDRAW 10 Answer General Printing Q Why don t the colors print the same as they look on the screen A Typically this is due to an incorrect or invalid color profile activated in the Corel Color Manager 10 Generic profiles are active by default and may not produce optimal output for your computer Try disabling the Apply ICC Profile check box found on the Miscellaneous tab of the Print dialogue box It is also important to note that many printer drivers have their own internal color management software that may be active This should be disabled if using a Corel color profile Additionally this color output issue may be a result of insufficient ink toner or another physical problem with the output device Try printing a test page from another application or from the driver to eliminate this as a cause Q Why don t some bitmaps or fills print when placed over other objects A This occurs because of a printer setting on some printers To resolve this click Start Settings Printers Click the printer icon and click File Properties Click the Graphics tab and click Use Raster Graphics Q How can contro
67. ct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206268 htm 2 von 2 22 02 2002 16 23 54 DISPLAYING IMAGE AND EFFECTS MENUS Top Navigational Bar DISPLAYING IMAGE AND EFFECTS MENUS DocumentID 206269 Revision Date 6 21 2001 4 19 23 PM The information in this document applies to CorelDRAW 10 Problem In Windows NT and Windows 2000 selecting the Image or Effects menu will not display the corresponding dialogue boxes when logged in as a member of a group which does not have administrative priviledges Answer It is very important to make a backup of your Windows registry prior to proceeding with the following instructions If you are unfamiliar with backing up the registry or registry editing in general it is strongly recommended that your system administrator make the following changes The importance of adhering to recommended recovery precautions as listed cannot be overstated The Corel Corporation assumes no expressed or implied liability for any computer or software damages resulting from the use or misuse of this information The Workaround to getting the Image and Effects dialogues to display 1 Log on as the Administrator The one who instal
68. e and trying to apply bitmap effects in DRAW or PHOTO PAINT 0 bytes 10 user gets error Crifx100 cannot create effect component Answer http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206473 htm When installing DRAW10 error appears stating Setup did not complete ive When installing Draw 10 this internal error comes up The only option is OK then the message 0 bytes Setup did not complete you must try again Answer Uninstall the http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206480 htm Changing the Default Artistic Text in Corel DRAW 10 76 i Change Artistic text options but when starting a new document the options are back to the 0 bytes defaults 1 From the Tools menu in DRAW 10 select Options 2 Click the http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206493 htm Line not found in Registry when launching Corel Texture and or Corel Texture Batcher ai When trying to launch the sub applications Corel Texture and or Corel Texture Batcher an error 0 bytes appears stating Line not Found in Registry or Goodies not Found http kb corel com kbdocs INKNOWN DRAW10 DRAW10_206501 htm Error When Attempting to Launch Corel Texture 76 Login as administrator 2 From the Start menu choose Run 3 Type in Regedit 4 Browse to 0 bytes HKEY_CURRENT_USER Software Corel 4 Export the following keys to the root http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206508 htm Accessing Clipart Copied to the Net
69. e the Live Preview of roll overs enabled Click the View menu and remove the checkmark from Enabel Rollover This will correct this issue Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205917 htm 22 02 2002 16 22 14 Uninstalling CorelDRAW 10 from Windows 95 Top Navigational Bar Uninstalling CorelDRAW 10 from Windows 95 DocumentID 206249 Revision Date 6 20 2001 5 18 43 PM The information in this document applies to CorelDRAW 10 Problem Warning Before manually uninstalling any application from Windows 95 it is strongly recommended to back up the SYSTEM DAT and USER DAT files In addition you should make backups of the WIN INI and SYSTEM INI files to a floppy disk These files can be found in the WINDOWS 95 folder CorelDRAW 10 is not compatible with or supported on Windows 95 To uninstall CorelDRAW 10 from the system it must be done manually The
70. e the steps required to search http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206267 htm Assigning PANTONE MATCHING SYSTEM Colors to Raster Images Raster images or bitmaps are generally CMYK or RGB As a result PMS PANTONE MATCHING SYSTEM colors are unavailable when printing separations There are two ways http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206268 htm 1234 next gt gt http venus corel com cgi bin texis kosearch kbsearch db kb amp category DRAW1 0 amp results 20 amp jump 0 2 von 3 22 02 2002 16 20 40 76 0 bytes 7 a 0 bytes 76 0 bytes ive 0 bytes 76 a 0 bytes 7 a 0 bytes 76 0 bytes ive 0 bytes 76 0 bytes 7 a 0 bytes 76 0 bytes ive 0 bytes Welcome to Corel Support Support Services Online Services Knowledgebase gt gt SCORE PRODUCTS gt SUPPORT SHOP CONTACTUS NEWS EVENTS SEARCH Welcome to Corel Support Support Services Online Services SUPPORT SERVICES Options Professional Premium Online Services Telephone Faxon Demand Tips amp Tricks Features in Action Online Services Corel s Knowledgebase Search This category only O The entire knowledge base lt lt previous 1234 next gt gt DISPLAYING IMAGE AND EFFECTS MENUS ive Windows NT and Windows 2000 selecting the Image or Effects menu will not display the 0 bytes corresponding dialogue boxes when logged in as a member of a gro
71. eUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206447 htm 22 02 2002 16 26 23 Toolbar Menubar or Color Palettes are missing Top Navigational Bar Toolbar Menubar or Color Palettes are missing DocumentID 206449 Revision Date 6 11 2001 4 16 47 PM The information in this document applies to CorelDRAW 10 Problem The toolbar menubar or color palettes are missing when the program is opened Answer Set the program back to the factory default settings Close the program hold the F8 key and reopen the application Hold the F8 until a message appears saying Are you sure you want to overwrite the current workspace with the factory defaults Press yes and let go of the F8 key If the message doesn t appear the F8 key wasn t held down long enough Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims feature
72. features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206830 htm 22 02 2002 16 28 53
73. fications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206270 htm 3 von 3 22 02 2002 16 24 19 VBA PERMISSIONS Top Navigational Bar VBA PERMISSIONS DocumentlID 206271 Revision Date 6 21 2001 4 57 29 PM The information in this document applies to CorelDRAW 10 Problem When the CorelDRAW 10 suite is installed with VBA on WinNT4 Windows 2000 as Administrator or on a multi user Windows 9X Windows Millenium platform VBA will not be initialized for any other user except for the administrator or the user who installed the application Answer It is very important to make a backup of your Windows registry prior to proceeding with the following instructions If you are unfamiliar with backing up the registry or registry editing in general it is strongly recommended that your system administrator make the following changes The importance of adhering to recommended recovery precautions as listed cannot be overstated The Corel Corporation assumes no expressed or impl
74. following sections will provide the necessary instructions to uninstall CorelDRAW 10 Answer Note Before attempting a manual uninstall of CorelDRAW from a system running Windows 95 the following precautions are strongly recommended Create a Startup Disk to allow recovery of basic computer functions in the event of a complete computer failure The Startup Disk may be created during the Windows 95 installation process or by clicking Start Settings Control Panel Double click on the Add Remove Programs icon and click Startup Disk Create Copy the SYSTEM DAT and the USER DAT to a folder on the Startup disk or to an additional disk if there is not enough space Both files are located in the root of the WINDOWS folder and can be used to restore the Windows 95 registry if damaged Move or backup any files that you have created using CorelDRAW Removing Files 1 Click Start Programs Windows Explorer 2 Double click the drive letter that CorelDRAW was installed to i e C 3 Double click the COREL folder and delete the folder where CorelDRAW is installed Note Folder names may vary if destination names were modified by the user during installation Removing Registry Entries 1 Click Start Run 2 Type REGEDIT on the Open command line and click OK 3 Double click on HKEY_CURRENT_USER to open the file Do the same for Software 4 Open up the Corel section and delete the following Corel PHOTO PAINT Corel R A V E
75. from A In many cases an object may be filled with a Spot color but the outline may be assigned a CMYK value Replace the CMYK outlines with the Spot equivalent Also ensure that you are not using a CMYK black or white Q My HP printer will not print bitmaps Instead of the image a gray or black box is printed A Find the driver initialization file on the hard drive HP INI DESKJET INI and open it in Windows Notepad Look for the line that reads JumboTechnology 0100 Modify this line to read Jumbo Technology 0000 Save and close the file Your bitmaps should print normally If the bitmaps still do not print correctly click File Print Miscellaneous tab and scroll down the list of Special Settings Click Print Bitmaps as RGB and click ON Q Why is an IPF error generated when try to print color separations A Ensure that the date and time are set correctly for your computer Click Start Settings Control Panel Double click Date Time adjust the date accordingly and click OK http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206266 htm 2 von 3 22 02 2002 16 23 23 Printing FAQs Q Two color pattern fills are not printing correctly on my printer How can correct this A Click File Print Miscellaneous and scroll down the list of Special Settings Click Print Bitmaps as RGB and click ON Q Files that used to print correctly on my PostScript printer will no longer print from CorelDRAW 10 How can correct this A
76. hat still does not allow the installation to finish look for VBOX and delete all the entries it finds Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206480 htm 22 02 2002 16 27 01 Changing the Default Artistic Text in Corel DRAW 10 Top Navigational Bar Changing the Default Artistic Text in Corel DRAW 10 DocumentID 206493 Revision Date 6 20 2001 5 09 25 PM The information in this document applies to CorelDRAW 10 Change Artistic text options but when starting a new document the options are back to the defaults From the Tools menu in DRAW 10 select Options Click the sign beside Document and click on Styles From the right side of the dialog box click on Default Artistic Text Click the edit button Select the desired font style from the drop down list click ok From the left side of the dialog box click on the word Document Place a check in Save options
77. higher number A By default the Undo level is set to 10 To change this setting click Tools Options Memory and enable the Enable Undo check box The maximum number of Undo levels is 99 Note The more undo levels used the more swap disk space Corel PHOTO PAINT 10 requires Q Why can t color a part of my image using the Fill tool Why does it always color the entire image A Click the Fill tool On the Property Bar select the HSB Color Tolerance Mode The value by default is 10 With the color tolerance value lower you will be able to color specific parts of your image Q Why does it take so long to open a Photo image from CD ROM 3 A The Photo images on CD ROM 8 are compressed using the Wavelet Compressed Bitmap WI format The actual uncompressed file size of these bitmaps can be anywhere between 3 and 6MB in size Q Why isn t the CompuServe Bitmap GIF filter type available in the Save Image As Type list box A The CompuServe Bitmap GIF format requires the image to be 256 colors or Paletted 8 bit Click Image Mode and click Paletted 8 bit to enable the GIF format Q How can create an animated GIF A Click File New In the Create a New Image dialog box click 8 bit Paletted as the color mode and 96 DPI as the resolution Enable the Create A Movie check box and click the number of frames required Click OK Create the animation and save the file as a GIF Animation Q Why are most of the Effect options grayed and
78. ice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206584 htm 22 02 2002 16 27 51 Location of shared file is greyed out when installing Draw10 Upgrade Top Navigational Bar Location of shared file is greyed out when installing Draw10 Upgrade DocumentID 206586 Revision Date 8 24 2001 11 31 06 AM The information in this document applies to CorelDRAW 10 Problem Location of shared file is greyed out when installing Draw 10 Upgrade Answer A previous Corel product was installed to a drive letter that since then has been removed and replaced by a CDROM or CDRW drive The applications must be uninstalled and the system then rebooted When reinstalling those apps or the upgrade to CorelDraw10 the option will appear to choose a different shared files location Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMO
79. ied liability for any computer or software damages resulting from the use or misuse of this information The workaround to get VBA working for all users 1 Log on as the Administrator The one in which installed the application 2 Click Start Run 3 Type regedit and hit the Enter key 4 Go to HKEY_CURRENT_USER SOFTWARE COREL CorelDRAW 10 0 5 When the key is highlighted select REGISTRY EXPORT REGISTRY FILE 6 Select a path to save the exported registry file that will be accessible to all users 7 Go to HKEY_CURRENT_USER SOFTWARE COREL PHOTO PAINT 10 0 8 When the key is highlighted select REGISTRY EXPORT REGISTRY FILE 9 Select a path to save the exported registry file that will be accessible to all users 10 Now Logoff as the Administrator 11 Logon as one of the users 12 Go to the path where the exported registry files were saved and double click each one 13 Select YES to add to the registry 14 Repeat the last three steps 11 13 for each user Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL N
80. ile in Wireframe view 7 a While working in Wireframe view no items can be selected without verifying the pick tool is on the 0 bytes outline before selecting Click Tools Options click the beside http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206440 htm Unexpected Condition 5002 units 1782 or 1670 76 i After the installation of Service Pack One the creation of a new document or the selecting of an 0 bytes object in an existing file gives an unexpected condition 5002 Answer http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206446 htm Changing the View of an object in Draw 10 76 When editing an image there are times when an object needs to be placed in an exact position 0 bytes However if the object is filled it may be difficult to accomplish http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206447 htm Toolbar Menubar or Color Palettes are missing 76 The toolbar menubar or color palettes are missing when the program is opened Answer Set the 0 bytes program back to the factory default settings Close the program hold http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206449 htm EPS export tip from draw ain Convert All Text to Curves Before submitting a file for processing Click Edit Select All Text 0 bytes then click Arrange Convert Text to Curves This will eliminate http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206450 htm CREATING CUSTOM REGISTRATION MARKS IN DRAW 10 76 When pr
81. inting in DRAW 10 the default registration marks may not be the correct size or may not 0 bytes be in the correct format There is the option to create custom registration http kb corel com kbdocs IUNKNOWN DRAW10 DRAW10_206462 htm HOME http venus corel com cgi bin texis kbsearch arch db kb amp category DRAW1 0 amp results 20 amp jump 40 1 von 3 22 02 2002 16 21 11 Welcome to Corel Support Support Services Online Services Knowledgebase Error Messages Launching Draw 10 76 The Kodak Color Management System could not be initialized Color Management functions will 0 bytes be disabled 2 A necessary profile could not be loaded Please reinstall http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206463 htm TEXT SWITCHES AUTOMATICALLY TO ENGLISH US WHEN TYPING TEXT IN CorelDRAW 76 iii 10 0 bytes When a language other than English US is selected as default in Input Locales under the Windows Regional Options CorelDRAW 10 automatically reverts back to English http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206464 htm Creating Transparencies in Animated GIFS with PhotoPAINT10 7 an Animated Gif files created in PhotoPAINT or RAVE can have transparent backgrounds To do 0 bytes this follow the procedure listed below Answer 1 Create or Open the animated http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206467 htm Cannot Apply Bitmap Effects since installing SP1 76 After installing Service Pack On
82. ion ie OS 9 2 or lower http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206724 htm Draw 10 MAC keeps crashing With virtual memory turned off Draw10 on Mac OS 9 2 or lower keeps crashing Answer Virtual memory must be on for all OS9 2 or lower systems that run Draw10MAC http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206726 htm How to overright current workspace with the factory defaults in DRAW10 MAC How to overright current workspace with the factory defaults in DRAW10 MAC DocumentlID 206727 Revision Date 10 11 2001 12 23 59 PM The information in this document http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206727 htm Cannot launch CorelDRAW 10 after installing service pack 2 After installing service pack 2 the following files get truncated CorelDRW100 dll to CORELD 1 dll and cdrfnt100 dll to CDRFNT 1 dll This will prevent the launch http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206800 htm Message Invalid directory specified in corelapp ini when launching CorelDRAW 10 9 on Windows 2000 Message Invalid directory specified in corelapp ini when launching CorelDRAW 10 9 on Windows 2000 DocumentID 206825 Revision Date 1 14 2002 1 39 21 PM The information http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206825 htm aa i 0 bytes 76 0 bytes 76 0 bytes 76 0 bytes ive 0 bytes 76 0 bytes 76 0 bytes 76 0 bytes HOME http venus corel com cgi bin tex
83. is kbsearch arch db kb amp category DRAW1 0 amp results 20 amp jump 60 1 von 2 22 02 2002 16 21 25 Welcome to Corel Support Support Services Online Services Knowledgebase Cannot Create Effect Component message when accessing bitmap effects in CorelDRAW PHOTO PAINT 10 Cannot Create Effect Component when accessing bitmap effects after having installed CorelDRAW 10 Service Pack 1 This may occur as a result of having TSR s loaded http kb corel com kbdocs IUNKNOWN DRAW10 DRAW10_206826 htm Performance issues as a result of editing text in CorelDRAW 10 Performance of CorelDRAW 10 deteriorates as a result of working with text Symptoms include the following Application menus do not respond immediately Various http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206827 htm Deploying CorelDRAW 10 over a network For information on how to deploy CorelDRAW 10 over a network please contact Corel Technical Services Details Product specifications packaging technical support http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206829 htm Cannot print lenses correctly to a non Postscript device Applying a lens effect to an object in CorelDRAW 10 does not output correctly even though it appears correctly in print preview Answer This is an issue with printing http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206830 htm lt lt previous 1234 Copyright 1999 Corel Corporation All rights reserved
84. kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206259 htm 2 von 3 22 02 2002 16 22 49 Creating Transparent Bitmaps 4 To increase the number of nodes around the bitmap click the desired spot and press the button found on the property bar 5 The newly created node s can be moved with the Shape tool to crop the unwanted background Note This bitmap will retain a rectangular shape if exported in bitmap format To keep this effect save the file as a CDR CMX or an EPS file To import the EPS file into CorelDRAW you must use the Postscript Interpreted PS filter instead of the EPS filter Transparent Bitmaps Using the Convert To Option Graphics that are created in CorelDRAW 10 can easily be converted to bitmaps 1 Click the Graphic using the Pick tool 2 Click Bitmap Menu Convert To Bitmap 3 This dialog box gives you the option to set the colors resolution dithering and anti aliasing as well as make the background transparent 4 Enable the Transparent background check box Note This transparency feature will only make a white background transparent It does not give the option to make another color transparent and it cannot make the background of an existing bitmap transparent Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations
85. l display Reset MenuBar to default application settings 7 Select Yes 8 Click OK Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206264 htm 2 von 2 22 02 2002 16 23 03 Corel PHOTO PAINT 10 FAQs Top Navigational Bar Corel PHOTO PAINT 10 FAQs DocumentID 206265 Revision Date 6 21 2001 4 00 30 PM The information in this document applies to CorelDRAW 10 The following document contains answers to frequently asked questions about Corel PHOTO PAINT 10 Q Where are the Plugins located Why don t they appear on the Effects menu A To install the Plugins 1 Click Tools Options Workspace Plug Ins 2 Click Add 3 Browse to the C PROGRAMFILES COREL GRAPHICS10 PLUGINS folder Double click the first Plugins folder Repeat this process for all remaining plugin folders 4 Enable the Initialize filters at start up Q Can the Undo level be changed to a
86. l the banding on my printed fountain fills A It is possible to specify the number of steps in the fountain fills in your print job A low number of steps prints faster but the transition between shades may be rather coarse causing what is known as banding A higher value results in a smoother blend but the printing time is longer To change this setting click File Print and click the Miscellaneous tab Type the number of steps to be used when rendering fountain fills in the Fountain Steps list box You can preview how the fountain fill will appear by opening the pre flight preview and adjusting the fountain steps Q When import an EPS file into CorelDRAW and print to a printer other than an Adobe PostScript printer the output appears pixilated and unclear Why A An EPS file is a Postscript PS file and is meant to be printed to a PostScript printer When printed to a non PostScript printer it will only print the file header which is a low resolution preview of the actual file If you wish to print the actual contents of the EPS file to a non PostScript printer import the file it into CorelDRAW using the PostScript Interpreted PS PRN EPS filter Q Why do get printer Spool file errors when print A This error is commonly caused by the WINDOWS SPOOL folder becoming too full or unable to accept new data If this occurs ensure that the WINDOWS SPOOL folder is purged of old print jobs The spooler can also be disabled in the Pri
87. led the application 2 Click Start Run 3 Type regedt32 and select Enter NOTE Missing the i in edit for a reason not a type mistake 4 Select the HKEY_LOCAL_MACHINE window 5 Go to key HKEY_CURRENT_USER SOFTWARE COREL CorelDRAW 10 0 6 With the COREL key highlighted select SECURITY PERMISSIONS 7 Now allow the users that are to be running the applications full control It will only give them access to this key and all of the subkeys 8 Hit APPLY and then OK The dialogues will now appear in CorelPHOTO PAINT for each menu item for each user CorelDRAW In Windows NT and Windows 2000 if not logged in with Administrator privileges the Bitmap Effects dialogue boxes are not accessible The Workaround to getting the Bitmap Effects dialogues to display 1 Log on as the Administrator The one in which installed the application 2 Click Start Run 3 Type regedt32 and select Enter NOTE Missing the i in edit for a reason not a type mistake 4 Select the HKEY_LOCAL_MACHINE window 5 Go to key HKEY_CURRENT_USER SOFTWARE COREL CorelDRAW 10 0 http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206269 htm 1 von 2 22 02 2002 16 24 06 DISPLAYING IMAGE AND EFFECTS MENUS 6 When the COREL key is highlighted select SECURITY PERMISSIONS 7 Now allow the users that are to be running the applications full control It will only give them access to this key and all of the subkeys 8 Hit APPLY and then OK The dialogs will no
88. ly an existing fill to a new object Answer This docker has been replaced by a feature called Copy Fill Properties Click Tools customization select commands Choose Fill And Outline for the category at the top Scroll down the list of tools select the Copy Fill Properties Click and drag it into the CorelDRAW workspace and click o k This new toolbar can be placed permanently anywhere in the CorelDRAW workspace Create a new object Click on the Copy fill properties button With the large arrow click on an object you want to copy the fill properties from Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205853 htm 22 02 2002 16 21 56 Cloned text not updating properly Top Navigational Bar Cloned text not updating properly DocumentID 205854 Revision Date 5 7 2001 10 00 42 AM The information in this document applies to CorelDRAW 10 Problem After
89. n will be visible in the scrapbook which is live it won t be greyed out Details http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206509 htm 1 von 2 22 02 2002 16 27 24 Accessing Clipart Copied to the Network Unfortunately the search index is hard coded into the application and will prevent you from pointing the search to the network share The good news is that there s a utility you can download called ROMCat It provides advanced functionality over the search features in CorelDRAW 10 Furthermore it s freeware It will create a catalog of all the clipart pbhotos on the network share and allow the same functionality of the search engine in CorelDRAW while also allowing you to generate thumbnail previews of all the images shared over the network Here s the link http www unleash com articles romcat When downloading the utility make sure you choose the Download ROMCat 4 2 Software and not the prebuilt library for D10 as you ll have to create the library and point to the network share Although this isn t officially supported by Corel we recommend and even use the utility in house Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are
90. nited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206254 htm 2 von 2 22 02 2002 16 22 43 Creating Transparent Bitmaps Top Navigational Bar Creating Transparent Bitmaps DocumentID 206259 Revision Date 7 9 2001 4 22 03 PM The information in this document applies to CorelDRAW 10 Problem Answer Transparent Bitmaps When a bitmap image is used in desktop publishing applications it is usually in the shape of a rectangle This does not have to be the case when using Corel applications because there are several different ways of making the background pixels of the image transparent so the graphics laying behind the image will show through the bitmap Eliminating a color can also alter the apparent shape of the bitmap For example if the Bitmap Color Mask is applied to the black background of a bitmap containing red text the bitmap appears to take on the shape of the text only The bitmap retains its original rectangular shape but it will print and display without the black backg
91. nstall Draw10MAC on the OSX partition of a dual boot system DocumentID 206724 Revision Date 10 11 2001 12 02 15 PM The information in this document applies to CorelDRAW 10 Problem When installing Draw10 MAC under the OSX partition of a dual boot system various errors will appear Answer Workaround Reboot to another partion ie OS 9 2 or lower and install Draw10 MAC Reboot into OS X and DRAW will be fully accessable Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206724 htm 22 02 2002 16 28 06 Draw 10 MAC keeps crashing Top Navigational Bar Draw 10 MAC keeps crashing DocumentID 206726 Revision Date 10 11 2001 12 17 50 PM The information in this document applies to CorelDRAW 10 Problem With virtual memory turned off Draw10 on Mac OS 9 2 or lower keeps crashing Answer Virtual memory must be on for all OS9 2 or lower systems that run Draw10
92. nswer Importing Clipart Search for the Clipart image bluegill cdr 1 Insert the CorelDRAW 10 CD ROM 2 2 Click File Import in the application CorelDRAW 10 3 In the List Files of Type list box choose CorelDRAW CDR 4 From the Import dialog box select the appropriate CD drive Double click the Clipart folder and the Collection folder 5 A list of clipart categories will appear in the import window 6 Double click on the Fish folder 7 From the list of files select bluegill cdr and click Import 8 Click on the page location where you want the image to be placed or hit the space bar to drop the image at the default location Accessing Symbols Symbols are not Opened or Imported into a document Symbols are installed in the same manner as True Type Fonts through the Windows Fonts folder Note The CorelDRAW symbols can be accessed directly from CorelDRAW provided all of the symbols have been previously installed If all of the symbols are not available install them in the same manner you would install True Type fonts Installing Symbols on Windows 98 2000 ME or Windows NT 1 Click Start Settings Control Panel and double click the Fonts icon 2 Click File Install New Font 3 Insert the CorelDRAW 10 CD ROM 2 4 Click the CD ROM drive from the Drives list box and double click the folder that contains the desired symbols i e X EXTRAFONTS SYMBOLS TTF 5 Click the symbol to be installed and click OK
93. nswer Known issue Corrected in service pack 1 Available for download from http www corel com support ftpsite pub coreldraw draw1 Osuite Details workaround is to change it through the Property bar Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206387 htm 22 02 2002 16 24 49 Undo function stops working in CorelDRAW 10 Top Navigational Bar Undo function stops working in CorelDRAW 10 DocumentID 206401 Revision Date 1 14 2002 1 39 54 PM The information in this document applies to CorelDRAW 10 Problem The undo function in CorelDRAW 10 no longer works Answer If Enable Rollover is enabled in CorelDRAW 10 the undo function will not be available To correct this click the VIEW menu and remove the check from Enable Rollover Details This issue has been addressed in Service Pack 2 for CorelDRAW 10 http www corel com support ftpsite pub coreldraw draw
94. nter Driver properties For most printer drivers click Start Settings Printers http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206266 htm 1 von 3 22 02 2002 16 23 23 Printing FAQs Click the printer icon and click File Properties Click Details Spool Settings Enable the Print Directly To Printer check box Q Why do bitmaps sometimes drop from my printed output A This may happen when the print job is complex To resolve this problem try one of the following fixes 1 Click File Print Preview Settings Driver Compatibility and enable Output bitmaps in 64K Chunks or 2 Click File Print Preview Settings Driver Compatibility and enable Send Bands to Driver Q Why can t import or print Duotone files that contain spot colors from CorelDRAW 10 A Duotones are 8 bit color images that use 256 shades of up to four tones To import Duotones into CorelDRAW 10 there are two options You can save the image in Corel PHOTO PAINT 10 as an EPS file and import it into CorelDRAW 10 using the Encapsulated Postscript EPS file type It is important that the correct filter type be chosen The separated output assuming it is being sent to a capable PostScript device will contain the corresponding spot color information despite having a grayscale representation on the screen The second method involves importing the bitmap into CorelDRAW and converting it to Duotone Be sure to assign the Pantone colors in the Duotone dialogue box Q Wh
95. oblem After adding the custom toolbars for percentage of black fills Using these toolbars causes The Corel Application Recovery Manager C A R M to appear Answer Use the default CMYK palette in CorelDRAW 10 Window Color palette place a check beside Default CMYK palette The first eleven colors on this palette range from 100 black to 100 white in increments of 10 Or a custom color palette can be created with only these 11 colors on it Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205893 htm 22 02 2002 16 22 07 Unable to add a space while editing text Top Navigational Bar Unable to add a space while editing text DocumentID 205917 Revision Date 5 7 2001 10 05 06 AM The information in this document applies to CorelDRAW 10 Problem While adding a space to text the text tool switches to the pick tool Answer This will occur when you hav
96. ocs UNKNOWN DRAW10 DRAW10_206410 htm 22 02 2002 16 25 11 The Instance OX77FCA66F Reference Memory at OXO03930690 Top Navigational Bar The Instance OX77FCA66F Reference Memory at OXO3930690 DocumentID 206411 Revision Date 6 26 2001 1 31 59 PM The information in this document applies to CorelDRAW 10 Problem Approximatly 10 15 seconds after closing CorelDRAW10 an error appears stating CorelDrw exe application Error The instance OX77FCA66F reference memory at 0OX03930690 The memory could not be written Answer Overwrite the current workspace with the factory default Hold the F8 key and relaunch the application Hold the F8 until a message appears saying Are you sure you want to overwrite the current workspace with the factory defaults Click Yes to this message and release the F8 key Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206411 htm 22 02 2002 16
97. om kbdocs UNKNOWN DRAW10 DRAW10_206384 htm Memory error when customize Bitmap Effects ain When customize Bitmap Effect function on the command bar it results in memory handle errors 0 bytes Answer Known Error Corrected in service pack 1 Available for download http kb corel com kbdocs IUNKNOWN DRAW10 DRAW10_206386 htm New outline properties are not holding 76 Change outline through Outline Property box or through Properties of the object are not holding 0 bytes Reverts to previous values Answer Known issue Corrected in service http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206387 htm HOME http venus corel com cgi bin texis kbsearch arch db kb amp category DRAW1 0 amp results 20 amp jump 20 1 von 3 22 02 2002 16 20 59 Welcome to Corel Support Support Services Online Services Knowledgebase Undo function stops working in CorelDRAW 10 ive Undo function stops working in CorelDRAW 10 DocumentID 206401 Revision Date 1 14 2002 0 bytes 1 39 54 PM The information in this document applies to CorelDRAW 10 Problem http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206401 htm When typing text each time hitting the space bar the pick tool is activated 7 ai Each time the space bar is hit the application toggles the space bar with the pick tool Answer 0 bytes Select View and remove the check from Enable Rollover Details Product http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206402 htm E
98. on will not be maintained When opening earlier version files that contained multilingual fonts for example Arial CYR the Panose dialog will be invoked even if the font is installed on the system The user needs to make the appropriate font substitution to the appropriate typeface and codepage and save the changes to the exceptions file once When you are finished save the file to a Version 10 format You will not have to do this again When opening earlier version files the user must select each text object and set the appropriate language for those objects using the Language dialog This way the correct Writing Tools language for spell checking and hyphenation can be applied to the various text objects in the document Also the user can re apply a multilingual font so the appropriate character set will be displayed When opening a file you have created in earlier versions of CorelDRAW the characters might become unreadable or you might not be able to change the font In CorelDRAW 10 the fonts are only intended to be applied to languages in which the font will work If you select text that is unreadable or if you need to change the font do the following 1 Click Text Writing Tools Language 2 Select the language of the current text The characters should then be correct and allow you to change the font Details Product specifications packaging technical support and information Specifications refer to theU
99. onal Bar Installation Instructions and FAQs DocumentID 206250 Revision Date 6 26 2001 5 42 25 PM The information in this document applies to CorelDRAW 10 Problem The following document is divided into four sections Installing CorelDRAW 10 Uninstalling CorelDRAW 10 Guidelines for a clean installation Installation Frequently Asked Questions Note Before proceeding ensure that the computer meets all hardware requirements and is running Windows 98 Windows ME Windows NT 4 0 or Windows 2000 CorelDRAW 10 is not designed for and will not run on earlier versions of Windows or Windows NT Answer The steps in this document should be followed if any difficulties are encountered during or immediately after the installation of CorelDRAW 10 Note It is important to read through this entire document before proceeding Installing CorelDRAW 10 1 Ensure that all other applications Terminate amp Stay Resident programs TSRs and screen savers have been disabled For information about disabling these applications refer to the Clean Installation section of this document The setup routine will automatically disable any of the standard Microsoft Screen Savers automatically 2 Insert CD ROM 1 If the Auto Insert Notification is enabled the Setup splash screen should appear Click on the Install CorelDRAW10 Install Corel PHOTO PAINT 10 Install CorelR A V E 10 option If the Setup splash screen does not appea
100. ools work Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206523 htm 22 02 2002 16 27 29 Cannot install Draw 10 Internal Error 2711 Bitstream Font Navigator Top Navigational Bar Cannot install Draw 10 Internal Error 2711 Bitstream Font Navigator DocumentID 206534 Revision Date 7 30 2001 10 30 19 AM The information in this document applies to CorelDRAW 10 Problem When trying to install Corel Draw 10 on your system the setup does not complete and the following error is indicated Internal Error 2711 with reference to Bitstream Font Navigator This usually occurs when one has had the trial version on the system Answer Click Start Settings Control Panel Double click Add Remove Programs Select CorelDRAW_TV or Corel Applications Uninstall DRAW10 Search for the file CorelDRAW 10_TV msi Right click on the file with the right mouse button and choose the
101. option to uninstall If this file is not available do a search for msi This will return all msi files Right click each and click Properties Find the file related to CorelDRAW10 and then right click and choose Uninstall Then try installing again Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206534 htm 22 02 2002 16 27 34 Configdir not found in the registry Top Navigational Bar Configdir not found in the registry DocumentID 206556 Revision Date 8 4 2001 9 45 34 AM The information in this document applies to CorelDRAW 10 Problem On opening of CorelDRAW10 an error appears stating configdir not found in the registry and the program closes Answer It is very important to make a backup of your Windows registry prior to proceeding with the following instructions If you are unfamiliar with backing up the registry or registry editing in general it is strongly
102. outline tab it will first round off the values to one decimal place and apply this new value to your selected object s To prevent this Open the Properties Docker switch to the outline tab and click on the Lock button to disable the auto apply The Docker will still report one decimal place but the original value set will still hold Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_205827 htm 22 02 2002 16 21 46 Some of the Full color pattern fills do not fill and display properly Top Navigational Bar Some of the Full color pattern fills do not fill and display properly DocumentID 205852 Revision Date 5 7 2001 9 58 04 AM The information in this document applies to CorelDRAW 10 Problem In the Pattern Fill dialogue window under full color some of the fills listed here do not preview correctly and when applied do not fill correctly as they did in previous versions Answer
103. owledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206556 htm 2 von 2 22 02 2002 16 27 39 Converting Scripts to Draw 10 Top Navigational Bar Converting Scripts to Draw 10 DocumentID 206584 Revision Date 8 22 2001 2 54 51 PM The information in this document applies to CorelDRAW 10 Problem Scripts created in previous versions of Draw will not execute in Draw 10 Answer Draw 10 now uses VBA and one way to convert scripts from Draw 9 to Draw 10 VBA is to change the lines WithObject CorelDRAW Automation 9 to WithObject CorelDRAW Automation 10 and to upgrade to VBA Wherever you see With Object CorelDRAW Automation 9 change it to With CorelScript and change the End WithObject line to End With Or to rewrite the Script using the VBA editor This choice being the best and most effecient Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without not
104. pace excessive fonts or temp files Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206446 htm 22 02 2002 16 26 18 http kb corel com kbdocs UNKNOWN DRAW 10 DRAW 10_206447 htm Top Navigational Bar Changing the View of an object in Draw 10 DocumentID 206447 Revision Date 6 11 2001 4 13 53 PM The information in this document applies to CorelDRAW 10 When editing an image there are times when an object needs to be placed in an exact position However if the object is filled it may be difficult to accomplish this There is a way to change the view of an object With the pick tool selected click on the object with the mouse and hit the Tab key on the keyboard The view will change from normal to wireframe This will make it easier to place objects in the exact location on the image Product specifications packaging technical support and information Specifications refer to th
105. r Close all applications and restart Windows After Windows launches go to the Start Menu choose Settings Control panel and double click the Fonts icon This will open and initialize the fonts folder For additional information on creating multilingual documents please refer to Windows on line help Topics Multilanguage Support Installing and Multilingual Documents Creating Double Byte and Bi Directional fonts are not supported when using Bitstream TrueDoc to embed fonts within a document On Microsoft Windows 2000 changing the default Writing Tools language in CorelDRAW 10 will cause the matching keyboard language to appear in the taskbar even if this input language is not installed by the user This results from the operating system making all required KBD files available when multi language support is installed When installing different language keyboards on Windows NT or Windows 2000 you must change both the input locale and the keyboard layout to an appropriate language for CorelDRAW in order to apply the correct text formatting CorelDRAW 10 uses a new method to enumerate multilingual fonts However because this differs from the font enumeration method used in earlier versions the following limitations will occur http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206254 htm 1 von 2 22 02 2002 16 22 43 Using Multilingual Fonts When saving a CorelDRAW document as Version 9 or earlier the font codepage informati
106. r click Start Run and type X SETUP32 EXE where X represents the CD ROM drive letter on the Open command line Click OK 3 After initializing the Welcome to CorelDRAW 10 setup screen appears Click next 4 The CorelDRAW 10 License Agreement is displayed Read the agreement carefully and click Accept or Decline 5 The Personalize CorelDRAW 10 screen appears Enter your name and company name and click next 6 CorelDRAW 10 Serial Number Enter the product serial number in the space provided The serial number is located on a black Product Authenticity Card included with the software Click Next to continue Please note you must enter the registration number into the space provided or CorelDRAW will NOT install http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206250 htm 1 von 4 22 02 2002 16 22 26 Installation Instructions and FAQs 7 On the CorelDRAW 10 Setup Options screen click Typical Compact or Custom 8 Click Next to continue and follow the instructions below for the selected installation option For the Compact and Typical Installation options o Destination Folder Select the destination folders for CorelDRAW 10 and click Next o Shortcut Folder Select the Shortcut folder or leave as default Click Next o Ready To Install You are now ready to install Click Install and follow the Installation Continued steps listed below For The Custom Installation Components Select the applications and fil
107. round This document will outline several methods for creating transparent backgrounds on bitmaps Graphics Interchange Format GIF in Corel PHOTO PAINT 10 and CorelDRAW 10 A bitmap image can be saved as a GIF file with a transparent background When saving the file as a CompuServe GIF be sure the Image has been converted to 256 colors The following method could be used to turn a CorelDRAW 10 or Corel PHOTO PAINT 10 graphic into a bitmap image CompuServe GIF with a transparent background In Corel PHOTO PAINT 10 1 Open the bitmap image 2 Click File Save As 3 Select GIF CompuServe Bitmap format from the Files Of Type list box and click the Save button 4 In the GIF Export dialog box enable the Image Color box Select the Eye Dropper tool and click the desired color in the Original window Click OK Clicking the Preview button will display the result in the Result window In Corel PHOTO PAINT 10 there is also an option to select Masked Area If the image contains a mask select this option and everything outside the mask will be designated as transparent Note that the Transparent Color can also be changed by clicking on the Color Table button When the image is imported into an application that does not support GIF transparencies this will be the background color that is displayed In CorelDRAW 10 1 Import the bitmap image into an existing document 2 Click File Export 3 Select the CompuServe Bitmap
108. rror 1310 when installing on NT ive When installing Draw 10 on the NT operating system multiple instances of Error 1310 will 0 bytes appear Select Ignore to each of these messages then before restarting http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206409 htm Draw10 Produces CARM When Opening Files 7 aa i When opening files of tyoe CDR the Corel Application Recovery Manager CARM appears 0 bytes stating that the application has become unstable Answer Download and install http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206410 htm The Instance OX77FCA66F Reference Memory at OXO3930690 76 Approximatly 10 15 seconds after closing CorelDRAW10 an error appears stating CorelDrw exe 0 bytes application Error The instance OX77FCA66F reference memory at 0X03930690 http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206411 htm TEXT WILL NOT CHANGE IN CHILD CLONE WHEN PARENT IS CHANGED IN DRAW 10 i Follow this procedure to resolve this issue Answer Follow this procedure to resolve this issue 1 0 bytes Create artistic text in the workspace 2 Click on EDIT CLONE http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206412 htm BARCODE DISPLAYS ON ALL PLATES WHEN PRINTING IN CMYK USING CorelDRAW 10 76 When printing color separations for a document that contains a barcode the barcode will appear 0 bytes on all the plates Answer 1 Search the harddrive for a file named http kb corel com kbdocs UNKNOWN DRA
109. s representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206449 htm 22 02 2002 16 26 28 http kb corel com kbdocs UNKNOWN DRAW 10 DRAW 10_206450 htm Top Navigational Bar EPS export tip from draw DocumentID 206450 Revision Date 6 20 2001 4 43 17 PM The information in this document applies to CorelDRAW 10 Convert All Text to Curves Before submitting a file for processing Click Edit Select All Text then click Arrange Convert Text to Curves This will eliminate any potential font problems by changing the fonts to artwork Color Selection Only use colors from the CMYK or Pantone Process Colors Palette Creating EPS Files for placement in other programs preferred 1 Make sure the colors are setup correctly and the text is converted to curves see above 2 Select a postscript printer from the printer setup dialog 3 Select the objects that are to be export make sure they are on the page items that bleed off onto the desktop will not work correctly 4 Select File Export change the Save as Type to EPS then check Selected Only then give a Name to the file then select Export 5 In the Expor
110. s you may also see CORELD 2 dll and CDRFNT 2 dll If this is the case rename the first two and delete all other occurrences Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206800 htm 22 02 2002 16 28 25 Message Invalid directory specified in corelapp ini when launching CorelDRAW 10 9 on Windows 2000 Top Navigational Bar Message Invalid directory specified in corelapp ini when launching CorelDRAW 10 9 on Windows 2000 DocumentID 206825 Revision Date 1 14 2002 1 39 21 PM The information in this document applies to CorelDRAW 10 Problem Invalid directory specified in corelapp ini occurs when launching CorelDRAW 9 or 10 on Windows 2000 This occurs as a result of user permissions on NTFS formatted systems Typically this problem will occur when trying to run CorelDRAW 9 or 10 as a member of the user group Answer There are two solutions to corect this problem 1
111. t Dialog Box select Export text as Curves Include Header 8 bit TIF 72 dpi Fountain Steps 256 Leave all other boxes unchecked then select OK Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206450 htm 22 02 2002 16 26 33 CREATING CUSTOM REGISTRATION MARKS IN DRAW 10 Top Navigational Bar CREATING CUSTOM REGISTRATION MARKS IN DRAW 10 DocumentID 206462 Revision Date 6 20 2001 3 50 28 PM The information in this document applies to CorelDRAW 10 When printing in DRAW 10 the default registration marks may not be the correct size or may not be in the correct format There is the option to create custom registration marks that will appear on all color plates when printing separations Follow these steps to create custom registration marks 1 Create an object that will serve as the registration mark ie a circle with an x through it 2 Group the object together by selecting
112. t to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206414 htm 22 02 2002 16 25 34 Dialog boxes appear to be in a different language Top Navigational Bar Dialog boxes appear to be in a different language DocumentID 206419 Revision Date 6 26 2001 1 15 28 PM The information in this document applies to CorelDRAW 10 Problem Click File Save As and the text in the dialog box is not in English ie German Japanese Answer Rename mfc42loc dll to Mfc42loc old Documented in Microsoft s knowledgebase article Q249592 at the following link http support microsoft com support kb articles q249 5 92 ASP 7LNG ENG amp SA AL Details The Microsoft knowledgebase document does state the problem is caused by Microsoft Picture It but other programs are installing it as well Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED I
113. tact Corel Technical Services Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206829 htm 22 02 2002 16 28 49 Cannot print lenses correctly to a non Postscript device Top Navigational Bar Cannot print lenses correctly to a non Postscript device DocumentID 206830 Revision Date 1 16 2002 2 30 30 PM The information in this document applies to CorelDRAW 10 Problem Applying a lens effect to an object in CorelDRAW 10 does not output correctly even though it appears correctly in print preview Answer This is an issue with printing lens effects from print preview with certain print drivers To resolve this close print preview prior to printing Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims
114. tart Windows click Yes Installation times will vary depending on the system configuration and installation options selected Uninstalling CorelDRAW 10 1 Click Start Programs CorelDRAW 10 Setup and Notes Corel Uninstaller 10 2 Welcome to the Corel Uninstaller appears Click Next 3 Select products to remove appears Enable the check boxes next to the corresponding program or components that you wish to uninstall If needed click the in front of the group to expand the selections 4 Click Next 5 Ready to remove products appears Verify that selections and click Next 6 Ready to remove products appears Click OK to begin uninstalling 7 Click Finish when prompted 8 Click Yes if prompted to reboot the system Note If for any reason the Uninstaller fails to complete you must perform a manual uninstall For more information about manually uninstalling CorelDRAW 10 refer to Fax on Demand document 3950 Uninstalling from Windows 95 This document applies to other versions of Windows Guidelines for a Clean Installation If you are receiving errors or experiencing system instability during the installation of CorelDRAW 10 perform the following steps to reduce potential conflicts during the installation It is important to follow all suggestions before reinstalling CorelDRAW 10 These instructions pertain to Windows 98 and Windows ME only Note Before proceeding ensure that you have a recent Windows 98 or Windows
115. ted Installation Frequently Asked Questions Q During the installation a series of errors are generated stating A required source file was not found What does this mean A This error may occur when one or more drives are running in MS DOS Compatibility Mode To verify this click Start Settings Control Panel and double click the System icon Click the Performance tab If any drives are running in this mode contact your hardware vendor for assistance in resolving this issue When a CD ROM drive is running in MS DOS Compatibility Mode it is usually using 16 bit drivers Update these drivers to 32 bit before proceeding If there is no indication of MS DOS Compatibility mode follow the instructions for a Clean Installation found earlier in this document Q How can start the setup routing if the splash screen doesn t appear when insert CD ROM 1 A Click Start Run Type X SETUP32 where X is the CD ROM drive letter and click OK Q How can avoid getting an Invalid Page Fault IPF when attempting to install the application A To resolve this follow the instructions for a clean installation found earlier in this document Q can t find my registration card How can find my serial number A Look through all of the documentation that came with the package carefully There should be a black Product Authenticity Card included with the software The serial number is printed on this card Contact Customer Service at 1 800 772 6735
116. ters that you wish to install Clicking the preceding each selection will expand the group to display the components within each group Click Next to continue Writing Tools Select the Spell Checker Thesaurus and Grammatik languages that you wish to install Click Next to continue Color Profile Select an optional color profile for the Monitor Input device i e Scanner Digital Camera and Printer Click Next to continue Note It is not necessary to install color profiles at this time They can be installed later through the Corel Color Profile Wizard Fonts Select the desired fonts and click Next Note It is strongly recommended that all of the fonts supplied are not installed This will cause slow performance and irregular system operation It is recommended that the number of fonts installed on the computer not exceed 450 Destination Folder Select the destination folders for CorelDRAW 10 and True Type fonts and click Next Note It is recommended that the Fonts be installed to the default folder Temp Folder Selection These are folders that will be used when temporary disk space is required It is recommended to assign local hard drives only Click Next Shortcut Folder Select the Shortcut folder or leave as default Click Next Ready To Install You are now ready to install Click Install and follow the Installation Continued steps listed below 9 Installation Complete Click OK If you are prompted to Res
117. tings Control Panel and double click the Fonts icon 2 Click File Install New Font 3 Insert the CorelDRAW CD ROM 1 4 Click the CD ROM drive from the Drives list box and double click the folder that contains the desired fonts i e X FONTS 5 Click the fonts to be installed and click OK Installing Extra Fonts 1 Click Start Settings Control Panel and double click the Fonts icon 2 Click File Install New Font 3 Insert the CorelDRAW 10 CD ROM 2 4 Double click extra fonts Double click the ttf or multiling folder 5 Click the fonts to be installed and click OK Installing True Type Fonts from the Bitstream Font Navigator 1 Click Start Programs CorelDRAW10 Productivity Tools Bitstream Font Navigator 2 If this is the first time opening it will ask to catalog your system 3 Once it has finished cataloging there will be two columns of fonts One is the catalog contents not installed and the other is the installed fonts To install a font from the catalog right click the desired font and choose install Details http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206253 htm 1 von 2 22 02 2002 16 22 38 Installing True Type Fonts Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct
118. tm Creating Transparent Bitmaps When a bitmap image is used in desktop publishing applications it is usually in the shape of a rectangle This does not have to be the case when using Corel applications http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206259 htm File Backup Options Both options Make Backup on Save and Auto backup may be accessed by clicking Tools Options Work Space Save These options can be invoked individually or concurrently http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206261 htm Changing Default Settings Click Tools Graphic amp Text Styles 3 Click the desired default object type from the list i e Default Graphic and right click 4 Click Properties 5 From the http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206264 htm Corel PHOTO PAINT 10 FAQs Where are the Plugins located Why don t they appear on the Effects menu A To install the Plugins 1 Click Tools Options Workspace Plug Ins 2 Click Add 3 http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206265 htm Printing FAQs Why don t the colors print the same as they look on the screen A Typically this is due to an incorrect or invalid color profile activated in the Corel Color Manager http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206266 htm Accessing Clipart and Symbols Importing is the primary method of accessing the clipart in CorelDRAW products for use within a document This tutorial will outlin
119. tmap Effects Top Navigational Bar Memory error when customize Bitmap Effects DocumentID 206386 Revision Date 7 10 2001 4 29 46 PM The information in this document applies to CorelDRAW 10 Problem When customize Bitmap Effect function on the command bar it results in memory handle errors Answer Known Error Corrected in service pack 1 Available for download from http www corel com support ftpsite pub coreldraw draw1 Osuite Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206386 htm 22 02 2002 16 24 45 New outline properties are not holding Top Navigational Bar New outline properties are not holding DocumentID 206387 Revision Date 7 10 2001 4 30 37 PM The information in this document applies to CorelDRAW 10 Problem Change outline through Outline Property box or through Properties of the object are not holding Reverts to previous values A
120. to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206253 htm 2 von 2 22 02 2002 16 22 38 Using Multilingual Fonts Top Navigational Bar Using Multilingual Fonts DocumentID 206254 Revision Date 6 21 2001 1 30 31 PM The information in this document applies to CorelDRAW 10 Problem The CorelDRAW 10 setup only contains a default set of fonts Extra fonts are provided on the CD Both True Type and Type 1 are provided on CD 1 in the Fonts folder and on CD 2 in the Extra Fonts folder Answer Installing Multilingual Bitstream Fonts There are additional Bitstream multilingual fonts provided with CorelDRAW 10 For the multilingual Bitstream fonts to be read correctly they must be installed using the accompanying inf file Corel_bt inf located in the same folder as the fonts The fonts are located on CD 2 in the Extra Fonts Multling folder To Install Multilingual Bitstream Fonts 1 Launch Windows Explorer 2 Insert CD ROM 2 3 Locate the Extra Fonts Multiling folder 4 Select the file Corel_bt inf Right click the selected file and choose Install Note After installing these fonts you must restart Windows and initialize the Fonts folde
121. unavailable A Most of the Effects listed in the Effects menu require a RGB color 24 bit image From the Image menu click Mode and click the RGB Color 24 bit option Q What are masks and how do I use them A Masks allow the user to click an area of the image to protect or isolate it from effects applied to the image Masks can be inverted edited and saved using various commands in the Mask menu To learn more about the many aspects of masking consult the Corel PHOTO PAINT 10 user manual page 49 Q When opening a Kodak Photo CD Image cannot click OK or NEXT in the Image Enhancement section A There are two possible workarounds if this occurs 1 Click Start Settings Taskbar Enable the Auto hide check box and click OK This will allow the Taskbar to drop below the bottom of the display when not in use therefore allowing the OK button to be displayed http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206265 htm 1 von 2 22 02 2002 16 23 12 Corel PHOTO PAINT 10 FAQs By moving your cursor all the way to the bottom of the screen the Taskbar will pop up again or 2 Click Start Settings Control Panel Double click the Display icon and click Settings Change the Desktop Area to a higher setting than 640x480 If you have any difficulties changing the screen resolution Q How can get my images from Corel PHOTO PAINT to the World Wide Web with a transparent background A A bitmap image can be saved as a GIF file with a transp
122. up which does http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206269 htm Digital data exchange DDE 76 The following document will provide the necessary instructions to enable only one instance of the 0 bytes programs CorelDRAW Corel PHOTO PAINT or Corel R A V E to be opened http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206270 htm VBA PERMISSIONS 7 aa When the CorelDRAW 10 suite is installed with VBA on WinNT4 Windows 2000 as Administrator 0 bytes or on a multi user Windows 9X Windows Millenium platform VBA will not be http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206271 htm CorelDRAW fails to launch hourglass disappears 76 When launching CorelDRAW the hourglass appears for a few seconds then disappears Answer 0 bytes Do a search for msvert dll on your hard drive and rename all instances http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206382 htm Customized workspace and not same when reopen it ive Added toolbars and buttons and when DRAW is reopened things have shifted Answer Known 0 bytes issue in release 10 410 Corrected in service pack 1 Available for download http kb corel com kbdocs IUNKNOWN DRAW10 DRAW10_206383 htm Opening closing dockers cause CorelDRAW 10 to crash 76 i Certain video drivers are known to cause CorelDRAW 10 to crash when dockers are manipulated 0 bytes To correct this perform one of the following 1 Update your video driver http kb corel c
123. vid or Photographic and print the file If you are using a Color Profile in CorelDRAW disable the printer color correction in the Printer Properties first In CorelDRAW click Tools Options Global Color Management General and change the Color Matching Mode to Photographic or Illustration Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206266 htm 3 von 3 22 02 2002 16 23 23 Accessing Clipart and Symbols Top Navigational Bar Accessing Clipart and Symbols DocumentID 206267 Revision Date 6 21 2001 4 07 32 PM The information in this document applies to CorelDRAW 10 Problem There are over 25 000 clipart images and symbols in CorelDRAW 10 Importing is the primary method of accessing the clipart in CorelDRAW products for use within a document This tutorial will outline the steps required to search for and import a specific clipart image from the clipart manual A
124. w appear in CorelDRAW for each menu item for each user Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206269 htm 2 von 2 22 02 2002 16 24 06 Digital data exchange DDE Top Navigational Bar Digital data exchange DDE DocumentID 206270 Revision Date 6 21 2001 4 22 52 PM The information in this document applies to CorelDRAW 10 Problem The following document will provide the necessary instructions to enable only one instance of the programs CorelDRAW Corel PHOTO PAINT or Corel R A V E to be opened when double clicking on files from Explorer Answer CorelDRAW 1 Double click the My Computer icon on the desktop 2 Click on View gt Folder Options Windows 98 Tools gt Folder Options Win ME 2000 or View gt Options Win NT 3 Click the File Types tab 4 Under the Registered File Types dialogue box select CDR CorelDRAW10 0 Graphic
125. work 7 aa Clipart images on a network location cannot be accessed through the initial screen of the 0 bytes scrapbook Answer NOTE This requires editing the registry so follow these http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206509 htm No Writing Tools Installed error message when choose Spell Checker 76 After clicking on Text Writing Tools and anything below it an error appears stating No Writing 0 bytes Tools have been Installed Answer Click on Start Programs CorelDRAW10 http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206523 htm Cannot install Draw 10 Internal Error 2711 Bitstream Font Navigator ive When trying to install Corel Draw 10 on your system the setup does not complete and the 0 bytes following error is indicated Internal Error 2711 with reference to Bitstream http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206534 htm Configdir not found in the registry 76 Windows registry prior to proceeding with the following instructions If you are unfamiliar with 0 bytes backing up the registry or registry editing in general it is strongly http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206556 htm lt lt previous 1234 next gt gt http venus corel com cgi bin texis kbsearch arch db kb amp category DRAW1 0 amp results 20 amp jump 40 2 von 3 22 02 2002 16 21 11 Welcome to Corel Support Support Services Online Services Knowledgebase gt gt SCORE PRODUCTS gt SUPP
126. xport the following keys to the root of C Corel Texture Texture Batcher To do this simply choose Export Registry file from the Registry menu 5 Log off Administrator and login as a user 6 Execute the two exported reg keys by double clicking them Details NOTE Every user who s a member of the User group will need to double click the reg files in order to run the application Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206508 htm 22 02 2002 16 27 18 Accessing Clipart Copied to the Network Top Navigational Bar Accessing Clipart Copied to the Network DocumentID 206509 Revision Date 7 10 2001 4 34 23 PM The information in this document applies to CorelDRAW 10 Problem Clipart images on a network location cannot be accessed through the initial screen of the scrapbook Answer NOTE This requires editing the registry so follow these instruction very carefully
127. y CD ROM required How do install CD ROM 2 and 3 A CD ROM 2 and 3 do not install They contain clipart photos sample files brushes etc and are used in conjunction with the application modules Q just installed CorelDRAW 10 on a computer running Windows 95 and am now getting Invalid Page Faults and Procedure Entry Point errors opening my programs How can resolve this A CorelDRAW 10 was designed and tested to run on either Windows 98 Windows ME Windows NT 4 0 or Windows 2000 No other operating systems are currently supported To uninstall CorelDRAW 10 from Windows 95 please refer to Fax on Demand Document 3950 Uninstalling CorelDRAW 10 from Windows 95 Details Product specifications packaging technical support and information Specifications refer to theUnited States retail English version only Specifications for other versions may vary All Specifications claims features representations and or comparisons provided are correct to the best of our knowledge of the date of publication but are subject to change without notice OUR MAXIMUM AGGREGATE LIABILITY TO YOU AND THAT OF OUR DEALERS AND SUPPLIERS IS LIMITED IT SHALL NOTEXCEED THE AMOUNT YOU PAID TO ACCESS THE INFORMATION SEE LEGAL DISCLAIMER http kb corel com kbdocs UNKNOWN DRAW10 DRAW10_206250 htm 4 von 4 22 02 2002 16 22 26 Default Installation Files Top Navigational Bar Default Installation Files DocumentlID 206251 Revision Date 6 2
128. y is my printer generating a Print Overrun error message A This message sometimes occurs with non PostScript HP LaserJet printers To resolve this click Start Settings Printers Click the printer icon and click File Properties Click the Graphics tab and enable Use Raster Graphics Q My Printer is printing slowly and sometimes receive the error message Windows could not write to the printer spool file How can resolve this issue A There are 3 possible solutions 1 Click File Print Preview Settings Driver Compatibility and enable Send Bands to Driver 2 Click File Print Preview Settings Driver Compatibility and enable Output bitmaps in 64K Chunks 3 Click Start Settings Printers Click the printer icon and click File Properties Click Details Spool Settings Enable the Print Directly To Printer check box Q Why do receive Out of Memory errors or low disk space warnings when try to print from my Corel application A This condition is directly related to the amount of system resources available at the time the print job is sent It is essential to have sufficient free disk space on the hard drive where Windows is located for virtual memory the creation of temp files and the printer spool file Depending on the size of the file free space required should be between 50 and 150 MB Q Why do my separations contain CMYK values thought my original file only contained Spot colors Where are these CMYK colors coming

Answer - DTP

Contents

Download Pdf Manuals

Related Search

Related Contents