Manual - Goldair
Contents
1. GOLDAIR Operating Instructions 80cm Misting Fan Item GCMF200 General Care and Safety Guide Thank you for choosing this Goldair product This Goldair appliance has been designed and manufactured to high standards of engineering and with proper use and care as described in this leaflet will give you years of useful service Please read these instructions carefully and keep them for future reference 10 11 12 13 14 15 16 Use only the voltage specified on the rating plate of the appliance Keep all objects at least 1 Metre from the front sides and rear of the appliance This appliance is intended for household use only and not for commercial or industrial use Use this appliance only as described in this manual Any other use is not recommended by the manufacturer and may cause fire electric shock or injury The common cause of overheating is deposits of dust or fluff in the appliance Ensure these deposits are removed regularly by unplugging the appliance and vacuum cleaning the air vents and grills Always unplug appliance when not in use When the appliance has been unpacked check if for transport damage and ensure all parts have been delivered If parts are missing of the appliance has been damaged contact the CDB Customer Services Team If your appliance does not work or is not working properly contact the place of purchase Repair work on the appliance by unqualified persons can2. 3 Cleaning the fan blade and back guard Remove both screws on the back guard and take the net clip off Take the back guard off Remove the nut and nut washer from the motor axle 3 Take the fan blade off Wash these parts and dry them then re assemble Cleaning and Maintenance Please clean the photocatalyst every month Cleaning the photocatalyst Remove the 4 screws D on the bottom box holding this item Take off the photocatalyst housing Remove photocatalyst Clean the dust from the photocatalyst and wipe the holder Re install all these parts in reverse order Please clean the unit body as required Clean the unit body Wipe the machine with soft wet cloth Use a mild neutral detergent for stubborn Stains DO NOT use any corrosive cleaners such as gas or alcohol to clean the plastic parts of the machine Put the machine into the box and keep it in a dry with good air circulation place To avoid risk of electric shock before cleaning you MUST ALWAYS switch off and unplug the Fan before cleaning PROOF OF PURCHASE a 4 SN O Cee A ae H de AL i Use only a soft damp cloth to gently wipe the Fan and dry well DO NOT immerse the Fan in water and never allow water to enter the motor housing DO NOT use harsh chemicals to clean the Fan Storage When not in use put the machine into the box and store it in a dry place with good air
3. its service agent or similarly qualified persons in order to avoid a hazard Components 1 Control button 2 Remote control receiver 3 Control panel 4 Air guide wheel 5 Misting plate 6 Front cover 7 Water level view 8 Bracket 9 Handle 10 Back guard 11 Water tank 12 Back cover 13 Power cord 14 Swivel castor a Il gt LT RE ES VW TILL AA CRE LL TE UEF F ai j te iliil i mm ii 11 En 13 Components Remote control Operate power on off Timer setting Misting setting Wind speed setting Front guard rotate setting lon function on off The functional buttons on the remote control work the same way as the buttons on the operating panel except the child lock and screen off functions POWER SPEED TIMER f a ne N N a 1 a QO O QO O O O NATURE LOW MID HIGH 2H 4H Buttons on the panel 1 On Off button 2 Wind speed button 3 Mist button 4 lon function button 5 Rotate function button 6 Timer button Operating your Fan This unit features four functions misting fan photocatalyzer ionizer and box fan in one You can use these functions at the same time or separately Misting function Using high frequency HF vibration Frequency 1 7 MHz or 2 4MHz which is inaudible and poses no harm to human body the ceramic misting plate breaks up the water droplets creat
4. circulation To receive warranty retain receipt as proof of purchase Refer to back of booklet SUPPORT AND TECHNICAL ADVICE Goldair New Zealand Monday Friday 8am 5pm Goldair Australia Monday Friday 8am 5pm Phone 61 0 3 9336 4423 Phone 1300 465 324 info cdbgoldair com au Phone 64 0 9 917 4000 Phone 0800 232 633 info cdb co nz CDB 4 GOLDAIR One Year Warranty Thank you for purchasing this Goldair product Your product is warranted against faults and manufacture when used in normal domestic use for a period of one year In non domestic use Goldair limits the voluntary warranty to three months Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing fault during the warranty period This warranty excludes damage caused by misuse neglect shipping accident incorrect installation or work carried out by anyone other than a qualified electrical service technician PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY The benefits to you given by this warranty are in addition to other rights and remedies available to you under a law in relation to the goods or services to which this warranty relates In Australia our goods come with guarantees that cannot be excluded under the Australian Consumer Law You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage
5. function icon is lighten on the screen at the same time the will speed display at 1 The Nature wind mode means that the fan will work the mode run 2 seconds then stop for 3 seconds Continue to press this ON OFF button all function shot off SPEED Press this button the wind speed will change to normal wind mode speed 2 and the screen will display at 2 press the button the second time and wind speed display at 3 press the button the third time the wind speed will change to strong power and display at 4 press the button forth time the wind will stop and display at O The wind speed will switch according to normal wind 2 3 4 0 sequence when pressing this speed button every time MIST Press the MIST button to start the misting function the misting LED will be lighten the mist work press it one more time the misting will stop and the misting LED is off The mist function is separately from the fan function so you could use it as humidifier ION Press the ION button to start the ION function lon function icon will be lighten on the screen press it one more time the lon function will stop and the ION function icon is off ROTATE When the fan function is on press the Rotate button to start rotating the rotation LED will be lighten on the screen press it one more time the rotation will stop and the rotation function LED is off Please note that when the fan function isn t on the rotation function can no
6. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act 1993 Goldair New Zealand Goldair Australia CDB Goldair CDB Goldair Australia Pty PO Box 100 707 PO Box 574 N S M C South Morang Auckland Victoria 3752 Phone 64 0 9 917 4000 Phone 61 0 3 9336 4423 Phone 0800 232 633 Phone 1300 GOLDAIR 1300 465 324 www goldair co nz www goldair com au Goldair One Year Warranty IMPORTANT Please complete and retain this warranty card Name Address Place Of Purchase Date of Purchase Name Of Product Model Number Attach a copy of the purchase receipt to this warranty card Due to continual design improvements the product illustrated in this User Manual may differ slightly from the actual product
7. cause serious risk to the user Ensure hands are dry before handling the plug or the Fan Carry out regular checks of the supply cord to ensure no damage is evident Children should be supervised to ensure that they do not play with the appliance Ensure that the cord is fully extended not coiled while in use Avoid contact with the moving parts Keep hands hair clothing away from blade of the Fan during operation to reduce the risk of injury to person and or damage to the Fan Switch off and use handles provided when moving This appliance is not intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they are supervised or have been given instruction concerning the use of the Fan by a person responsible for their safety Never place appliance close to radiant heat source TECHNICAL SPECIFICATION Model Supply Wattage GCMF200 220 240VAC 50Hz 85W 17 18 19 20 21 22 23 24 25 26 27 28 29 Never operate in areas where petrol paint or other flammable liquids are used or stored Never use the appliance to dry clothes Never insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an electric shock fire or damage to the appliance Never use abrasive cleaning products on this appliance Clean with a damp cloth not wet rinsed in hot soapy wate
8. ing an elegant dry mist without the need to heat or add any chemical agent lonizer function Negative ions can refresh the air by neutralising positive IX inne sil Ply ITU iit Warning Unplug the appliance before filling and cleaning Press the water tank handle button to take out the water tank Please refer to picture 1 Fill the water tank with water then place the water tank back in the machine Please ensure that the water tank has been securely fastened to the back cover Please refer to picture 2 totte T FLE et ste ey ieee ions Air pollution is made up of many positive ions solid particles bacteria and chemical fog When they combine the positive and negative ions attract which can make the pollutants drop out of the air Photocatalyst function The blue piece at the base of the fan bottom houses the photocatalyst It can decompose noxious gases inorganic compounds inhibit the growth of the bacteria and the activity of viruses to supply fresh air IT TTIINE Piihi eter at p mE Put the machine on a stable surface insert the plug into the socket A buzzer will sound Beep Beep the power icon will light up on the screen the machine is now in standby mode Please refer to picture 3 Press on off button to start the fan Operating your Fan ON OFF Press the on off button the fan will start with nature wind mode and fan
9. r only Always remove plug from the mains supply before cleaning Never connect the appliance to mains supply until completely assembled and adjusted Never remove plug from power socket until the appliance has been switched off Never remove plug from power socket by pulling cord always grip plug Never twist kink or wrap the cord around the appliance as this may cause the insulation to weaken and split Always ensure that all cord has been removed from any cord storage area and is unrolled before use Never use this appliance in the immediate surrounds of a bath a shower or a swimming pool or other liquids The appliance must not be immersed in any liquids Due to the risk of injury never use this appliance for any purpose other than its intended use This appliance is intended for use in household and similar applications such as staff kitchen areas in shops offices and other working environments farm houses by clients in hotels motels and other residential type environments bed and breakfast type environments Never use this appliance outdoors The use of an extension cord power board or external timer is not recommended with this unit Never operate the appliance with a damaged cord or plug after it malfunctions or if it has been damaged in any manner Have the appliance checked and repaired by a qualified electrician if repair is necessary If the supply cord is damaged it must be replaced by the manufacturer
10. t be use TIMER The fan has a 2 hour or 4 hour timer When the fan or the misting function is on press the Timer button for time setting the timer LED it will switch between 2 hours 4 hours and off each timer you press the Timer button Cleaning and Maintenance Warning Please be sure to power off the fan and pull out plug from the socket before cleaning misting box once every two weeks using Please clean the water tank and the I the following steps Cleaning water tank Take out the water tank and rinse with i clean water then pour out the water and 5 r wipe the tank with a clean cloth Oy I Cleaning misting box and misting box cover Pull out the mist tube from the mist box cover then take out the mist box and clean it see picture 1 Remove the scale on the mist plate and mist box with a soft brush then flush with clean water Drain the water and dry it with a cloth See picture Picture 1 Picture 2 Cleaning and Maintenance Please clean the misting plate fan blade Remove the 2 screws from the misting and back guard every month plate base Pull out the misting plate base Pull out the front air louvre Cleaning the misting plate Pull out the decorative ring on the misting Clean each component with a soft cloth plate and re assemble Remove the 3 screws from the cover Pull out the misting plate cover i rosd ANNANN E S en ul I nl ll IL
Download Pdf Manuals
Related Search