Cam Viewer Lite
Contents
1. Nes jes ed AL v ednesdiay E Thursday E Friday E Saturday fult M3 De Stat Time End Time Recon EZ Con Beachgeon 00 00 23 68 Always 30 Normal Normal You can click Configure button to modify the further settings for the record After press you will see the dialog box below page 2 Cam Viewer Lite Encoding Options Original viden General e Videa Encoder 4 Motion Detect StartTime 00 00 2 Hane Bale Sere am sensitivity po pF Normal Ka mame eg guality SE Frame Irtenral Foz Resolution oo 30 Rectangle Count 1 ax 11 EJ Record Audio Record Moving Only Enable Video Parameter The setting of a schedule can be adjusted in Encoding Option panel General Setup Start Time and End Time select the recording mode from either Always Record or Record Moving Only which may save storage space Video Encoder You can adjust the Frame Rate from left to the right to increase the value the Quality move to the right to increase the value and the Resolution of the image Higher Quality and higher resolution means better details of image in the mean while it will occupy more storage space Check the box of Encoded video to see the preview and find your balance between storage Space and image quality Motion Detect When selecting Record Moving Only you may change the detection area by drawing a square2. 09 000 d d End Time 8 23 22007 110150 a Select Camerac 1 16 17 32 Ox OCC 2 JC 4 JU 5 OC 6XX OX 8 Record Always Record Moving To withdraw the record Step 1 From the window at the top left of the Day Time Panel select the date you want to check and you will see red green lines show on the time table implying available recorded video Step 2 You can select the video clip you wan to review by left clicking and dragging to highlight the time period Besides using the time table you may indicate the time period of video that you want to see by using the Start Time and End Time in Date Time Period section Step 3 In Select Camera s section select the camera s channel s from which you want to see the video You can select all the cameras by clicking Select All button Step 4 Check the box of Enable Preview to get the preview of the video you select Step 5 Click OK when you are satisfied with the setting page 18 Cam Viewer Lite 5 2 Unusual Event General Motion Intelligent Search Tool panel Click on the Search Mode icon and get the Intelligent Search Tool panel You can setup unusual events here to detect abnormality that occurred during the video was recorded General Motion Detect any movement in the defined detection zone Define detection zone To detect General Motion you have to define a detection zone Left click and drag and draw a detection zone You may define
3. Check the box on the camera list to activate the PTZ control function of a PTZ camera Basic Setting Select the Camera Model Com Port Baud Rate and Address according to your PTZ camera Advanced Setting You may setup the Pan Speed Tilt Speed Zoom Speed and Auto Pan Speed page 34 Cam Viewer Lite 7 5 User Account de Setting General Camera lO Device PTZ Config User Account Monitor Display User Account Setting Group Description Marne Admin Administrator Group User Description Password Password Confirm Disable User Account Privilege Main System Execute Main System O Schedule Start and Stop Smart Guard Start and Stop O Schedule Setting O Smart Guard Setting PTZ Control System Setting counting Application O Live Streaming Serwer O Remote Playback Server Playback User Account Manage user accounts here Highlight the account on the list at the right and then you can change the Privilege setting by check and un check the box of each function page 35 Cam Viewer Lite 7 6 Monitor Displa dr Setting General Camera IC Device PTZ Config UserAccount Monitor Display rr Primary ent ICA 312 oi Ic 312 Auto Gran 02 IC4 350 sg L2 ICA 350 l s 1VS 110 IV5 110 Primany Channel NetUsed 7 O04 ICA 107 tg D ICA 107 secondary Channel TIRE ent ICA 107P P05 ICA 107P dente ICA 107 deih Oe ICA 1071 Auta scan Interval 2 sar
4. Cam Viewer Lite users manual Cam Viewer Lite Table of Contents T Fu e e oon rib nie nee ed cantine ati 2 2 VS E E e E E 2 RN TR AEC MINS CA ALIOM E 2 a Nam T TT 15 SP Da E 17 L PID Dac ECONS OO a sa bRNM USUS Ur UP DKNEUEUPERUEDE 18 5 2 Unusual Event General MOUOD irosc sssscessecssicsenndontsevecexeseoainedeswastilasenedetvevecenesens 19 A CO dd 20 Ne Te Ke a cur EEE 2 2 9 PEINE D e E 22 300 09 NN E A E E E E 23 E TE 24 eM Load Preset ee 25 6 2 Insert a new schedule manually nneneseessseoeeesssssssseeersssssssseeersssssssecerrssssssseee 26 6 3 Insert a new schedule manually onnnnsesssseoeeesssssssssseresssssssseeresssssssseerrsssssssees 26 D CORS De YO ERIT OO DOO 27 he CONNUT AUION EE 29 TMCV RE 30 E B14 o E 3 abo 33 dA COS 34 es UET ACC OUE G eee 35 ee DI P e E E E E E SS 36 a E E V VOWEL E 37 Os D LE C E N E A AE N A E A OE E E E E E E 38 Dol TOC KD ea E E E E E E N E E E E 38 D 2 IE RASC CON 0r Ormai Oi en EEE on 40 10 Ee nt 41 MAO Kee 4 102 BI AVES I TR m 43 LOS POFTODIBBH eege 44 IU Ei WIC a a 45 PAP WU e AH 47 Ee 48 page 1 Cam Viewer Lite 1 Introduction Cam Viewer Lite is the basic bundle software provides the general function for your daily operation For more power
5. O No will restart the computer later page 14 Cam Viewer Lite 4 Main Console When Cam Viewer Lite running you will see the main console in the start You can refer to the sections below to know how to operate Cam Viewer Lite as you want The main operation system To activate schedule recording setup smart guard and configure system setting Exit Shut down SCB Video Surveil lance System or log out current user Minimize Minimize the Main Con sole Camera Number Camera Name Numbers shown as the port connected rename the cameras in Config General Setting Screen Division Allocate the sub screen displays of cameras by clicking on the icon of desired layout Quick switch to single camera display by double click the particular sub screen Double click the single camera display again to regain previous screen division layout Camera Selection Choose an area on the display screen and then click on the number of the camera to put it on the chosen area page 15 Cam Viewer Lite On Screen Menu Enable Move Right click on the camera screen and get the On Screen Enable Talk Menu from which you can Enable Move Enable Talk and Connect Disconnect the camera connect Note You can only work on current camera after clicking Enable Disconnect Move or Enable Talk With a PTZ camera locked you may control it by clicking the screen You can also talk to a camera with the Show Camera two way audio function To
6. Username Part oo Password Getting MBM 5 Voltages Finished http users pandora beloan Update page 12 Cam Viewer Lite 22 Please select your motherboard vendor and model name then click Next to continue MBM Configuration Wizard Motherboard Monitor Configuration Wizard From the list belowe select your board and revision and press Mext to let the vvizard setup MBM for you Abit Accelertech Acer Acarp Albatran Altan Amptron AME AMS AOpen ASRock 23 Please select temperature format and click Next to continue MBM Configuration Wizard Motherboard Monitor Configuration Wizard The final step iz ta select a tew specific user settings Temperature format Celsius Fahrenheit page 13 Cam Viewer Lite 24 Please click Finish to end the motherboard monitor configuration wizard MBM Configuration Wizard Motherboard Monitor Configuration Wizard The Wizard iz finished setting up MBM for you If for some reason vou selected the wrong board or want to try other settings then you can simply run this Wizard again Your original MBM 5 ini ix renamed to MBM 3 old 39315 5668609294 Press Finish to exit 25 Please click Yes to restart your computer 15 Setup Motherboard Monitor 5 e L3 Completing the Motherboard Monitor 5 Setup Wizard To complete the installation of Motherboard Monitor 5 Setup must restart your computer Would you like to restart now
7. Type s i Device Marne Signal Type Input 0 Output 0 Module Device g IvS 110 IP Camera Digital Input Monitor Digital Ouput Simulation 9 O D D Module Setting To name the module device and ID connecting the digital input output device s to your system Devices Shows the device s installed to the system ID Select the number of the I O port to which you plug the ribbon cable Digital Input Monitor Trigger the digital input device and the related icon will light up To check if the device is correctly connected or not Digital Output Monitor Click on the icon and trigger the digital device connecting to your system to test if it is correctly connected Digital Input Output pins of selected I O module Name To name the device input and output Type To select from the pull down menu N O means that the digital signal is Open in normal condition N C mean that the signal is Close in normal condition page 33 Cam Viewer Lite 7 4 PTZ Config dr Setting General Camera uo Device PTZ Config User Account Monitor Display Basic Setting O Cat ICA 312 E CAMOZ ICA 350 Camera Model CAMOS 5 110 O CAMO4 ICA 107 Pim O campos ICA 107P O CAMO6 ICA 107wW Baud Rate O cama ICA 108 Address Advanced Setting Pan Speed Tilt Speed Install the PTZ camera following the instruction of the manufacturer The PTZ camera is usually connected to the PC with RS 485
8. igi ICA 108 Agir IC 108 Layout MxM Type BxB Cameras List Show all cameras on the left list Auto Scan Choose Auto Scan to rotate the channels cameras on the screen For instance you select the Screen Division mode to show only 4 sub screens on the Main Console while having 16 channels connecting to the system Use the Auto Scan function and then you are able to see all the 16 channels showing by turns You can also setup a Primary Channel to keep it always on the screen and a Secondary Channel that has the secondary priority Layout Choose the number of divisions for NxN division on the Main Console screen page 36 Cam Viewer Lite 8 Log Viewer System Lag Log Type All Date 4u9 23 2007 v 3 Date amp Time E Aug 23 2007 1324 to E aug 23 2007 1324 v Event Time 2007 08 22 15 12 27 2007 08 22 15 12 49 2007 08 22 15 22 10 2007 08 22 15 22 10 2007 08 22 15 28 26 2007 08 22 15 28 50 2007 08 22 15 34 29 2007 08 22 15 41 01 2007 08 23 11 09 52 2nnmner3 11 10 12 Event Type Description Main Console Startup Modify Configuration Modify Configuration Enable Channel Enable Channel Enable Channel Enable Channel Enable Channel Enable Channel Enable Channel Modify Configuration Start Schedule Stop Schedule Modify Configuration Start Schedule Stop Schedule Main Console Shutdown Main Console Startup Lser Login Modify Configuration Start Schedule Stop Schedule Modify
9. 5 when you install Cam Viewer If you don t install MBM 5 the CPU status will not be display even you have check the option here page 30 Cam Viewer Lite 7 2 Camera ETT General Camera iro Device FTZ Config User Account Monitor Display a Insert M Delete m Config d amp CAMO1 ICA 312 d amp CAMO2 ICA 350 5 CAMO3 IV5 110 d5 CAMO4 ICA 107 JE CAMOS ICA 107P ET 5 CAMO ICA 108 aa Camera Parameter ee Video Parameter 08D Setting ICA 107w 50 J Brightness v Enable 50 jH Contrast MW Show Date 2007 08 23 50 p Saturation iv Show Time Pwo1 58 00 en Hie M Show Camera Number Iw Show Camera Name Camera Settings Default W Translucent Apply All Camera List The camera s connected to the system will show on the panel click the name of the camera and then you may adjust the setting of it Camera Parameter Camera Name Name the camera for your convenience when insert the camera Camera Settings You can press this button to configure the selected IP camera After click you will see the dialog box below page 31 Cam Viewer Lite IP Camera Video Server Setting Network Marne IP Address 110 Use DNS Http Part ER User Name admin Password Protocol Device Camera Model ICA 10BW Camera Eur E E D E D E Description Video Codec MEGA Audio Codec None Lamera DEO DO 0
10. Configuration Mirdif Cormac ir tinm System Log You can choose the Log Type form the pull down menu including Console Startup Console Shutdown User Login User Logout Start Schedule Stop Schedule Execute Recycle Execute Backup Enable Channel Disable Channel Start Smart Guard Step1 Choose the type of event you want to check or select All on the pull down menu for all types of events Step 2 You can either view the events on a particular date or during a given time period To search and view Unusual Event on a particular date check the box right next to Date and indicate the date you want to check You may also point out two different time points and search for Unusual Event between them Mark the box in the Date amp Time column and then enter the date and time Step 3 Click Search page 3 Cam Viewer Lite 9 Backup Cam Viewer Lite has support a convenient interface of backup function for user to backup the record file and log information to another place 9 1 Backup The Backup Till function saves video record and the other log information You can open the Backup file on any PC with Windows OS and have the full function Playback panel on it Step 1 Click New Period to get the Backup panel to add a new time period you want to backup E Backup System SEE Backup Help A A New Period Start Date Time End Date Time Cameras Step 2 From the window at the top left select the date you
11. are 2 special addresses numbered 2E and 46 MBM 5 does not scan these unless vou enabled this on the advanced tab this i because some folder boards would lockup when scanning As there are more and more newer boards on the market these 2 addresses are becoming more popular to place a sensor chip many intel boards have a Fan sensor here Blacklist Do vou want to do this Elite ECS K755 Yes enable it for me 9 No will enable it myself if need it No my board is in the blacklist Cancel page 10 Cam Viewer Lite 18 When Ready to Install the Program will display on the screen and click Install to continue E Setup Motherboard Monitor 5 Aka Ready to Install Setup is now ready to begin installing Motherboard Monitor D on your computer Click Install to continue with the installation ar click Back if pou want to review ar change any settings Destination location C Program Files Motherboard Monitor 5 Start Menu folder MBM 5 Extra Settings Icons Replace the Icons 10 seconds after MBM D started Hemstal MBM 10 res Install MBM 10 System Install Cancel 19 The Welcome to the Motherboard Monitor Configuration Wizard will display on the screen please click Next to continue MBM Configuration Wizard Welcome to the Motherboard Monitor Configuration Wizard Motherboard Monitor MBM is a highly configurable program that
12. begin the installation you want to review or change any of your installation settings click Back Click Cancel to exit the wizard Install Cancel page 5 Cam Viewer Lite 8 Please click Yes to continue Note When Cam Viewer works with MBM5 Motherboard Monitor 5 Cam Viewer will display CPU temperature and fan speed Please click No if you don t need this function and the Cam Viewer installation will be finished When you click Yes please refer to below steps to start the MBMb5 installation Question 2 MEMS can help Ea monitor health status of your system Would vou like to install now 9 The Welcome to the Motherboard Monitor 5 Setup Wizard will display on the screen and click Next to continue 15 Setup Motherboard Monitor 5 Welcome to the Motherboard Monitor 5 Setup Wizard This will install Motherboard Monitor 5 3 7 0 on your computer Ik is recommended that you close all other applications before continuing Click Hest to continue or Cancel to exit Setup Cancel page 6 Cam Viewer Lite 10 Please read the license agreement and then check accept the agreement if you are agreed and click Next to continue installation ie Setup Motherboard Monitor 5 DoR License Agreement Please read the following important information before continuing Please read the following License Agreement ou must accept the terms of this agreement before continuing with
13. on the Original video screen the default setting is to detect the entire screen You can also adjust the Sensitivity and Frame Interval here page 28 Cam Viewer Lite 7 Configuration In this section you can configure Cam Viewer Lite with more detail settings L4 Setting Save Load Configuration KE LC auntimg ammpiiatior Log Viewer Backup Live Streaming Server About MainConsole Playback Schedule Contig Click the Config icon selection from the pull down menu and open the Configuration panel After select the Setting you will see the configure screen as below D Setting General Camera KO Device PTZ Config User Account Monitor Display Startup Storage F Main Console Location i Status Display iw Current Date Schedule Recording System r r iw Current Time iw Free Disk Space jw CPU Temperature Live Streaming Server iw Auto Login User Account admin Panel Resolution Auto Fit D Password jw Automatic Recycle Keep Video days 7 days iw Keep System Log 14 days iw Keep Event Log jw Keep Counting Log 90 days Audia Preview Audio Channel Not Used Volume e Celsius Degree C Fahrenheit Degree iw CPU Fan Speed User Defined Text 1 User Defined Text 2 E page 29 Cam Viewer Lite 7 1 General dr Setting General Camera UO Device PTZ Config User Account Monitor Display Startup Stor
14. the installation This is a legal agreement Agreement between you either an individual or an entity the end user Recipient and Alexander van Kaam BY INSTALLING COPYING OR OTHERWISE USING THE PRODUCT 45 DEFINED BELOW YOU AGREE TO BE BOUND BY THE TERMS OF THIS AGREEMENT IF YOU DO NOT AGREE TO THE TERMS OF THIS AGREEMENT DO NOT INSTALL COPY OR USE THE PRODUCT M do not accept the agreement 11 Please read the following important information before continuing and click Next to continue installation 15 Setup Motherboard Monitor 5 Information Please read the following important information before continuing When you are ready to continue with Setup click Next MBM 5 3 7 0 MEM 5 Care EXE umo sab MEM 5 Care DLL 6 MBM 5 Settings DLL 610 MEM 5 Dashboard OLL ayaa MEM 5 Hibernation DLL 5 0 0 0 MEMS Ras DLL 5 0 0 0 MBM 5 Logger OLL 53 4 MEM 5 hail FTP and UDP DLL 5 5 4 0 MEM 5 050 DLL SE RES h Dih4 C mom Tal Lan ns me page Cam Viewer Lite 12 Please click Next to continue installation 15 Setup Motherboard Monitor 5 Languages MEM 5 and non english languages MEM 5 supports many languages ta keep the initial download smaller only the English language file is included IF you wish to run MEM 5 in your native languages then please qo to http mbm livewiredev com and check out the MBM 5 download section IF your native language iz not yet supported t
15. to check or select All on the pull down menu for all types of events Step 2 You can either view the events on a particular date or during a given time period To search and view Unusual Event on a particular date check the box right next to Date and indicate the date you want to check You may also point out two different time points and search for Unusual Event between them Mark the box in the Date amp Time column and then enter the date and time Step 3 Click Search page 23 Cam Viewer Lite 6 Schedule Click on Schedule icon on Main Console and get the Schedule configuration panel to setup the time schedule for video recording Schedule Configuration E mn fi Deout fo s 2 3 4 s e 7 s s m n n n w w w 0 0 n m n z uii EI Default HI Camera 1 E amp 01 Camera 1 HI Camera2 m 02 Camera 2 El Camera 3 E 03 Camera 3 ST Camera 4 E 04 Camera 4 B Insert M Delete S Configurate End Time Record FPS Quality Resolution 12 45 Always 30 Normal Normal Default Holiday Custom Load Tee E Camera 1 EN Kl 01 Camera 1 MN Cames Ej 02 Camera 2 Hi Camera 2 t amer 4 Ki Di L Camera Channel t leet Rn Deb p Contient Seyi Time End Tee Recon Fre Quality Resets 0600 1245 Always 30 Normal Normal Day Mode C Week Mei or X canoe Day Mode Schedule the cameras on a daily basis which means that the recorder will be on and off at the same time according to the same s
16. 38 27 3kB Step 8 Choose the path you want to save the file or burn the file into a CD direct CD burning for Windows XP only Sumar Total backup data size KB Media Backup using CDIDYVR Writer C Backup on HardDisk Option Backup Event Log Backup System Log VW Backup Counter Log Step 9 Select which log information you want to backup System Log and then click OK page 39 Cam Viewer Lite 9 2 Erase recorded information Step 1 Click New Period to get the Backup panel to add a new time period you want to erase all the data recorded Step 2 From the window at the top left select the date you want to remove from and you will see red green lines show on the time table implying available data recorded Step 3 You can select the data you wan to erase by left clicking and dragging to highlight the time period Besides using the time table you may indicate the time period of the data you want erase by using Start Time and End Time in Date Time Period section Step 4 In Select Camera s section select the camera s from which you want to erase or select all the cameras by clicking Select All button Step 5 Check the box of Enable Preview to get the preview of the video you select Step 6 Click OK when it is done and go back to the Backup panel Step 7 Click on the Delete icon and erase the data page 40 Cam Viewer Lite 10 Live Streaming Server Live Streaming Server setting in Cam Viewer s
17. Portuguese Brazilian Portuguese Standard Russian opanish and Thai Please select the language and click Next to continue Planet CamViewer Lite 1 0 0 Install5hield Wizard Choose Setup Language Select the language for the installation from the choices below Chinese Simplified Chinese Traditional Danish English French Standard Deman Greek Italian Japanese Korean Portuguese Brazilian Portuguese Standard Russian InstallShield Ce Co 3 The Welcome to the InstallShield Wizard for Planet Cam Viewer Lite 1 0 0 will display on the screen please click Next Planet CamViewer Lite 1 0 0 InstallShield Wizard Welcome to the InstallShield Wizard for Planet Cam iewer Lite 1 0 0 The InstallShield Wizard will install Planet Cam viewer Lite 1 0 0 on your computer To continue click Met Cancel page 3 Cam Viewer Lite 4 Please read the license agreement and then check accept the terms of the license agreement if you are agreed and click Next to continue the installation Planet CamViewer Lite 1 0 0 InstallShield Wizard License Agreement Please read the following license agreement carefully End User License Agreement EULA Do not install or use the software until you have read and accepted all of the license terms Permission to use the software is conditional upon your agreeing to the license terms Installation or use af the software by you will be deem
18. Z Network Fill up the Network field including Name IP Address Http Port User Name Password and Protocol referring to the instruction provided by the manufacturer Check Use DNS to use domain name instead of IP address Device Choose the manufacturer of the IP camera from the pull down menu Click on Auto Detect and the model name will be shown in the box Description Shows information of the IP camera Video Parameter Adjusts brightness contrast saturation and color hue Apply All Click to apply the setting to all the cameras OSD Setting Select what you want to put in the On Screen Display showing on the sub screen of the camera Three function buttons will be included in the Setting Camera panel if you have our Hybrid Surveillance System license for IP camera using insert Click and the IP Video Server Setting panel will pop up You can add an IP camera in the system with the Setting panel See next page for detail Delete Click and delete the selected IP camera s click OK and then the IP camera s will be removed from the system Config Click and the IP Video Server Setting panel will pop up You can modify the IP camera settings with the Setting panel See next page for detail page 32 Cam Viewer Lite 7 3 I O Device amp Setting General Camera WO Device PTZ Config User Account Monitor Display VO Device Setting Digital input output pins of selected UO module Module 11Y5 110 Name
19. age Status Display Main Console Eachan EE Iw Current Date Schedule Recording System Iw Current Time Smal ird GystE W Free Disk Space E jw CPU Temperature Live Streaming Server f Celsius Degree E j Gere iw Automatic Recycle C Fahrenheit Degree lw Auto Login Keep Wideo days lw CPU Fan Speed User Account admin F Keep Event Log E days User Defined Text 1 poses W Keep System Log 14 days Fanel Resalutian Auto Fit jw Keep Counting Log 90 days User Defined Text 2 P Audia Preview Audio Channel Not Used Volume Startup Check the box and activate the functions as the system starts You may start stop the function in Monitor panel on the Main Console Storage Location Assign the path and folder in which the system saves the files Automatic Recycle The system will automatically delete out dated data and save storage space Keep Video Deletes the video records older than the number of days you set Keep Event Log Deletes the event log data older than the number of days you set Keep System Log Deletes the system log data older than the number of days you set Keep Counting Log Deletes the counting application data older than the number of days you set Audio Preview Assign the audio channel to preview and the sound volume Status Display Select which information you want to show on the information display on Main Console About the CPU status you should install the MBM
20. ally Step 1 Left click and draw the length you want on time table The scheduled time will show as a grey bar Step 2 Click on the Insert icon and add a new schedule with the setting of Regular Mode that is to record video during the time period you set with 30 FPS Normal video quality and Normal resolution Step 3 Change the setting if you want by click on the Configure icon or double click the schedule information Step 4 Click OK 6 3 Insert a new schedule manually You can also setup a new schedule manually in Week Mode and click the Insert button then following the same process as in Day Mode to insert page 26 Cam Viewer Lite Za Schedele Configorstion dle A cepe EI Cesari El 01 Camera 1 lid Monday Bid Turdi lud Wednesday Bad Thursday lud Friday lid Saturday v Ed b Camraz Ed 03 Camera 3 v Ed D Carnora 4 Za Schedale Configuration di Loud iy Copy to ve EI Deal Ed O1 Camera 1 E EJ 03 Camera 3 v ES CH Carnera Duy Meis REH Green EI Werk Motel Cameral o 1 2 3 4 FE 7 1 HI Sunday iL Monday IL Tuesday E w ednesday EJ Thursday HL Friday E Saturdsy Debs p Configure Sun Time Eni Time Record FPS Cmality Resin 00 00 2359 Always 9 Normal Normal PEA x cancer Camera 1 EI Sunday iO Monday E Tuesday Es D I A um EI E A SR les LI gem ze E La ion je
21. cept 2005 12 05 14 56 24 Play CAM 1 admin 2005 12 05 14 56 29 Play CAM 2 admin 2005 12 05 14 56 31 Play CAM 5 admin 2005 12 05 14 6 33 Play CAM 9 admin 2005 12 05 24 56 36 Play CAM 12 admin 2005 12 05 14 56 38 Play CAM 14 admin X Cancel Live Streaming Server log information page 44 Cam Viewer Lite 11 Live Viewer On Live Viewer console you can run the web browser to watch the video from remote live streaming server s via Internet e Remote Live View Windows Internet Explorer Rey ey eiwemaeun O D Jur Remote Live View e PLANE Babwcrbrg amp Coreta reai Select the camera from the server hold the left click and drag the camera to where you want to put the image You can right click the camera on the list to connect disconnect it Log In Log Out Select the server and click Log In Log Out icon to log in log out the server or you can right click the sever on the list to log in and log out Play Stop Select a camera video and click Play Stop to play stop the particular channel page 45 Cam Viewer Lite e Remote Live View Windows Internet Explorer m e oe iE htpi921680 1 E Jur Remote Live View PLANET Rebecrkirg amp Commancation IP of the server Open an Internet Explorer and enter the IP number of the server followed by the connecting port Connect Disconnect Select the camera from
22. chedule you setup every day To setup the time schedule for each camera you may 1 Load the preset Modes or 2 Insert a new schedule manually Week Mode Schedule the cameras for each day of the week differently In addition you may appoint extra holidays in Week Mode page 24 Cam Viewer Lite e E E Default El 01 Camera 1 Aw ETE lid Monday lud Tuesday lud Wednesda fad Thursday Default gon li Saturday v Bw ca ra flue Dee pe Configure Ki 03 camer VE r v Ed 04 Camera 4 nn Time End Time Record FPS Quality Eechen 00 00 23 59 Always 30 Normal Normal Le x X Cancel Day Mode Custom Holiday Week Mode Default Follow the same process to setup the schedule for every day in a week Holiday You may appoint Holiday s on which the system will work as the setting of Sunday Custom Or you can appoint a particular date s on which the system will work on a special schedule different from the others 6 1 Load preset Modes Click on the Load icon and get a pull down menu Hegular Mode Record video 24 hours a day with the setting of 30 FPS frames per second Normal video quality and Normal resolution Office Mode Record video from 8 am to 8 pm 08 00 20 00 shown as a red bar on Schedule Configuration panel with 30 FPS Normal video quality and Normal resolution Shop Mode Record video from 10 am to 10 pm 10 00 22 00 with 30 FPS Normal video quality and Normal resolution High Securit
23. ed ta be acceptance of the license terms Acceptance vvill bind you ta the license terms in a legally enforceable contract with PLANET TECHNOLOGY CORP SOFTVVARE LICENSE AND LIMITED WWARRARNT Y This is an agreement between you the end user and PLANET TECHNOLOGY CORP Planet By using this software you agree to become bound by the terms of this z Cancel 5 Please key in user name and company name for which you want and click Next to continue installation Planet CamViewer Lite 1 0 0 InstallShield Wizard Customer Information Please enter your information Please enter your name and the name of the company for which vou work User Name EMM Company Name PLANET Cancel page 4 Cam Viewer Lite 6 Check the option Complete all program features will be installed Requires the most disk space and click Next to continue installation Planet CamViewer Lite 1 0 0 InstallShield Wizard Setup Type Select the setup type to install Please select a setup type All program features will be installed Requires the most disk space Select which pragram features you want installed Recommended for advanced users 7 Ready to Install the Program will appear to prompt you to start the installation Please click Install to start Planet CamViewer Lite 1 0 0 InstallShield Wizard Ready to Install the Program The wizard iz ready to begin installation Click Install to
24. ful functions you may install the Cam Viewer Pro 30 days trial version to operate After 30 days testing you can contact to your local dealer or direct connect to PLANET sales team sales planet com tw for the Cam Viewer Pro 2 oystem Requirement Duo QX6800 Duo E6600 D 930 GHz GHz mu 4GB Jee oe 168 1GB Chipset of Intel 946 or 965 chip Intel Chipset recommended Motherboard VGA Card ATI Radeon 9200 nVIDIA GeForce FX 5200 Intel 945 965 or above ATI recommended Ethernet 100Base TX or above Gigabit LAN recommended Hard Disk 160 GB or above Windows 2000 XP 2003 Total FPS Means all the cameras will spend how many frames when this software works Suppose there are 10 cameras each one will work with 30fps the total fps should be 300fps 3 Software Installation 1 Insert the bundled Cam Viewer CD disk into the CD ROM drive to launch the autorun program Once completed a welcome menu screen will appear Click the Cam Viewer Lite hyperlink the below InstallShield Wizard dialog box will appear Note If the welcome screen does not appear click Start at the taskbar Then select Run and type D CamViewer Lite setup exe assume D is your CD ROM drive page 2 Cam Viewer Lite 2 Selects the language which you want Cam Viewer is current including fifteen languages Chinese Simplified Chinese Traditional Danish English French Standard German Greek Italian Japanese Korean
25. gathers information from key hardware components such as your CPU Motherboard and Fans and conveniently displays this information in your system tray This wizard will help you configure MBM based on settings sent in from others like vau Press Next ta continue or Cancel to exit Cancel page 11 Cam Viewer Lite 20 The Motherboard Monitor Configuration Wizard will display on the screen please click Update to update data Before update please make sure your PC is connected to Internet already MBM Configuration Wizard Motherboard Monitor Configuration Wizard The MBM 5 settings file iz dated 16 jun 2004 06 41 37 The voltage ini file is dated 18 Jun 2004 08 41 37 You can update this information if t s to ald by pressing the update button below if you do this then make sure you have an active internet connection If needed set your proxy settings Use Proxy Authentication Host User name Port Dan EE 21 Wait a moment after the program update finish please click Next to continue MBM Configuration Wizard Motherboard Monitor Configuration Wizard The MBM 5 settings file is dated UO zen 2004 09 33 19 The voltage ini file is dated 09 Sep 2004 09 33 00 You can update this information if it s to ald by pressing the update button below if you do this then make sure you have an active internet connection If needed set your proxy settings Use Proxy Authentication Host
26. ge 20 Cam Viewer Lite 5 4 Save Video Save Image Save Video Step 1 Choose the camera display you want to save as a video clip Step 2 Set up the Cue In and Cue Out points the cue in and cue out time will show up on the display Step 3 Click Save Video icon choose the folder where you want to save the file enter the file name and click SAVE You may export save the record with both audio and video or you can explore the video only Step 4 Choose the compression format and then save the video Save Image Step 1 Chose the camera display from which you want to save pictures Step 2 Click Save Image button when the image you want is on the screen You may click Pause to freeze the video use Step Forward Step Backward function to find the picture you want to save Step 3 Choose the folder and the format of image BMP JPEG GIF PNG or TIFF you prefer and then click save Note You may pre set a folder and format that you want to save the images thus skip Step 3 page 21 Cam Viewer Lite 9 5 Print Backup Print E Print Setup Fage Setting e Original size C Fit to page Align Image Top Print Content e Print active channel image f Print all channels in the current view zoe Come Backup Print in original size Fit the page Align Top Center or Bottom Print Content Pnnt the image from selected channel orall the channels shown on the screen Different from Save Video t
27. ggle Fullscreen Show Camera You can also put another camera on the particular screen by selecting a camera from the menu Toggle Fullscreen Click and switch to full screen display Playback Click the icon to get Playback Console You can watch recorded video search adjust image from records data save video pictures and print images check log in information event records and setup recording function configuration See Playback on page 14 for detail Start Click on the pull down menu to Start Stop Schedule System Start Stop Smart Guard System Start Stop Counting Application or click on Start Stop Monitor All to activate deactivate all the functions above Stop alarm by clicking Cancel All Events Note The system will consider everything in the screen is normal when you click Start to activate monitor function Therefore for example if you want to detect Missing Object be sure the object that you want to protect is in its position when you click Start button Schedule Schedule recording time table and setup recorder configuration Smart Guard Add edit type s of events which you want to detect setup reaction s responding to events Config System settings Backup and Counting Application PTZ Camera Control Control the movement of installed PTZ camera System Info Day Time HD space information Information Window Shows the system information including date time free HD space CPU temperature fan speed and c
28. hall provide a way to turn the PC into a web server that the manager can view the cameras attached to this Cam Viewer installed PC The manager can stay at any where yet can still remote watch monitor the video from Cam View through any at hand Web browser The settings including Main setup Black White List and Performance settings 10 1 Main x Main Black White List Performance Client Count IW Kill Client Kill All Clients Bitrate E bps Kill Clint Kill All Clients Service server Status Stopped Options Pont 5150 Default hiaxihauin M Use Detaultivveb Sener Port Stop M Save Log LiveServer log On Live Streaming Server panel you can see the clients who are logging on your computer and watching the live video from the remote side Kill Clint Highlight the IP and click Kill Client to block the client from your system Kill All Clients Block all the clients logging to your system Stop To stop broadcasting live stream video page 41 Cam Viewer Lite Maximum Use Poit Web server Save Log pITCUU X x Main Black White List Performance Client Count D Kill Client Kill All Clients We Ro Cem Biss y Service server Status Stopped Start Stop Options Port 50 Default Maximum 100 Use Default Web Server Port 8080 Save Log LiveServer log ES ua Options You can adjust the configuration when the Server is stopped Port As
29. he Backup function saves everything from the Playback panel including log information You can open the Backup file on any PC with Windows OS and have the full function Playback panel on it and take the backup file to elsewhere to work on the recorded video page 22 Cam Viewer Lite 5 6 Log Viewer A Log Viewer System Lag Log Type All Date E Aug 23 2007 v Date amp Time E ug 23 2007 13 24 jv to E Aug 23 2007 1324 WS Event Time 2007 08 22 15 12 27 2007 08 22 15 22 10 2007 08 22 15 22 10 2007 08 22 15 22 10 2007 08 22 15 22 10 2007 08 22 15 28 26 2007 08 22 15 28 50 2007 08 22 16 42 22 2007 08 23 11 09 24 2007 08 23 11 08 52 ann7 408423 11 10 12 Event Type Description Main Console Startup Modify Configuration Modify Configuration Enable Channel Enable Channel Enable Channel Enable Channel Enable Channel Enable Channel Enable Channel Modify Configuration Start Schedule Stop Schedule Modify Configuration Start Schedule Stop Schedule Main Console Shutdown Main Console Startup Lser Login Modify Configuration Start Schedule Stop Schedule Modify Configuration Mondife Contin ration Set System Log You can choose the Log Type form the pull down menu including Console Startup Console Shutdown User Login User Logout Start Schedule Stop Schedule Execute Recycle Execute Backup Enable Channel Disable Channel Start Smart Guard Step1 Choose the type of event you want
30. hen you can always contact mbrmielivewiredev com for information on how to add your language to MEM 5 13 Please click Next to install with original settings or you may click Browse button to assign a install folder then press Next to continue La Setup Motherboard Monitor 5 Select Destination Location Where should Motherboard Monitor 5 be installed cJ Setup will install Motherboard Monitor 5 into the following folder To continue click Next IF vou would like to select a different folder click Browse C Program Files Motherboard Monitor S Al least 3 8 MB of free disk space is required page 8 Cam Viewer Lite 14 Please click Next to install with original settings or you may click Browse button to rename the program s shortcut of Start Menu then press Next to continue E Setup Motherboard Monitor 5 Ltr Select Start Menu Folder Where should Setup place the program s shortcuts FA Setup will create the program s shortcuts in the following Start Menu Folder To continue click Next IF you would like to select a different folder click Browse Browse 15 Please select Replace the icons 10 seconds after MBM5 started and click Next to continue installation 15 Setup Motherboard Monitor 5 Windows XP Keeping the icons visible in the tray Windows sF has Feature that will hide certain icons This Feature can result in the MEM 5 icons not showing
31. more than one zone on the screen by repeat the process Alarm est Type Dinara Motion Born Region Dptngpmn Is Define Batectun mane ai Gina Ractangio count 0 he Orge Repin B Slop when und Intelligent Search Tool Alarm Event Type General Motion Sensitivity Interval 1 D 1 1 1 Region D finition Define detection zone Rectangle count 0 MW Draw Region M Stop when found page 19 Cam Viewer Lite 5 3 Enhancement Enhancement Tool x General Setting Apply active channel C Apply all channels Filter Setting l Sharpen l Brightness M Contract l Grey Scale General Setting Check the circle and chose whether you want to apply the setting to all the channels or only to those currently shown on the Screen Filter Setting Visibility Check the box and adjust the gamma value of the image which means you may enhance the image and make it cleaner Sharpen Check the box to activate the function Move the control bar to the right to sharpen the image to the left to soften it Brightness Check the box to activate the function Move the control bar to the right to make the image brighter Contrast Check the box to activate the function Move the control bar to the right to increase contrast Grey Scale Check the box to show the record in grey scale mode which is in black and white pa
32. sign the network port you want the clients to connect to your system Use Default Web Server Check the box and activate Web Server so that the clients will be able to watch live video on Internet Explorer The port is set to 80 by default Maximum Users Number of connections that are allowed to connect to your system One camera video counts as one connection Save Log Appoint the folder and save the log information there page 42 Cam Viewer Lite 10 2 Black White List x Main Black White List Performance Wee EE White List Add to Black List Delete IP Field HD IP Range TENTER Add Delete 192 168 1 1 192 168 1 20 Accept Apply to All Play back Servers Apply to All Network Servers White List Check the box to activate White List filter Only IPs from the White List is allowed to log in Black List Check the box to activate Black List filter IPs from the Black List will be blocked IP Field Enter IP into the IP field on the left or enter 2 sets of IP to indicate a series of IPs Add Delete To Add the IP s onto the list or remove it from the list Apply to All Playback Servers To apply the setting to all the servers page 43 Cam Viewer Lite 10 3 Performance Total bitrate Individual Camera bitrate Live Streaming Server p ain Black White List Performance bitrate 195 9Kbps Camera 1 bitrate 6 7Kbps 2005 12 05 14 56 24 User Login admin Ac
33. the server hold the left click and drag the camera to where you want to put the image or double click the camera on the list to connect tt Select the camera on screen or on the list and click the Disconnect icon to disconnect the camera Play Stop Select a camera video and click Play Stop to play stop the particular channel page 46 Cam Viewer Lite 12 About Click About on the pull down menu to view the version of your surveillance system and the hardware information About Main Console MainConsale wersion 1 0 0 el PLAMET TECHNOLOGY CORP http fn planet Com Ia Product Information Model Type Cam Viewer Lite IP Camera License Number 32 L page 4 Cam Viewer Lite Appendix A Comparison Sheet IP Camera Input Dual Monitor Mes Live Streaming Server Yes Remote Playback Server OS o O General Setting Camera Setting I O Device Setting PTZ configuration Send Mail Mes User Account Counting Application a c Multiple Language Recording Schedule Log Viewer System log Unusual event System Log Counting Application Backup CD ROM Hard Disk CD ROM Hard Disk Concurrent Playback 1 Channel 16 Save Video AVI AVI Note The Cam Viewer Pro in the CD ROM only provide 30 days trial If you want to use Pro version after trial period Please consult PLANET local dealer or PLANET sales representative page 48
34. up in your tray when you set MBM to start with Windows XP There is a possible solutions for this by making MBM 5 replace the icons in the system tray 10 seconds after they first appear This might trick Windows ab into believing they are active icons You can select to do this here or you can do this later via the tray tab In MBM 5 Please select your option Replace the icons 10 seconds after MBM 5 started Let me handle it myself via the MBM 5 settings Tray OSD tab Cancel 16 Please click Next to continue installation page 9 Cam Viewer Lite 15 Setup Motherboard Monitor 5 Windows NT 2000 4P Install the MBM 10 Driver 32Bit ou are Running Windows NT 200044P and the required MBM 10 system driver has not been detected The install program will now install this diver The recommended settings for this driver are listed below IF for some reason the recommended settings do not work properly an your system WOU can always change it later in the Man Plug and Play section of the control panel paina 000P or you can select to re install the driver with this same installer Recommended Windows MT 2000 Automatic Windows SP System and in some cases IF vou get a privliged instruction error Boot System w 15 Setup Motherboard Monitor 5 BEES Extra scanning Enable JE and 4E port scanning The installer has detected that this is the 1st time you installed MBM Dm this directory On your Motherboard
35. ustomized text You can customize the setting of Information Window in Config gt General Setting gt General page 16 Watch the recorded video view and or search for unusual events and recorded system information Quick search on the video drag it to where you want to review Turn off the Playback Console Minimizes the playback Console window Play pause and stop the video Set up the Cue In and Cue Out points of the clip you want to save as a video clip or a back up file with all the information recorded including log info events reported and so Cue In and Cue Out time will show on the Playback Information display once they are set Controls the play back speed speed up and down Zoom in and zoom out You can get a close up view of the recorded video and move to the spot you want to view by dragging the screen Cam Viewer Lite 5 1 Playback Console Browse Mode Play the recorded video Search Mode Click on the Search Mode icon and get the Intelligent Search Tool panel You can setup unusual events here to detect abnormality that occurred during the video was recorded To setup unusual events Audio Volume Control Adjust the sound level Date Time By clicking on Date Time button you can withdraw the video record that you want to review As you click on the Date Time button a control panel will show up Eb DateTime Search Dialog Browse Mode Date Time Period Star Time 8222007
36. want to backup from and you will see red green lines show on the time table implying available data recorded Select Date Time Period a S Record Date Date Time Period Video Preview 88 2007 08 23 d Start Time 8 23 2007 09 00 00 Enable Preview 2007 08 22 v EndTime 823 2007 7 091500 Select Camera s Ae 1 16 17 32 XAAS V x4 x5 xe x7 xe9 9 X10 K 11 K12 K 13 K 14 X15 X 16 Select All Deselect All 2007 08 23 09 00 03 M1 camera 1 Camera 2 E Camera 3 fa Camera4 B Camera 5 if Camera 6 6 Camera B Camera8 v ME Record Always Record Moving i X Cancel page 38 Cam Viewer Lite Step 3 You can select the data you wan to backup by left clicking and dragging to high light the time period Besides using the time table you may indicate the time period of the data you want to backup by using Start Time and End Time in Date Time Period section Step 4 You can click on the camera number icon to add the camera s or click Select All to add all the cameras Step 5 Check the box of Enable Preview to get the preview of the video you select Step 6 Click OK when it is done and go back to the Backup panel Step 7 Click the Backup icon and you can see the size of the file led Backup System m Ki t j New Period i2 Backup EN Delete Stark Date Time End Date Time Cameras Size 28 23 2007 8 00 00 AM 6 23 2007 8 15 00 AM 1 5
37. y Mode Record video 24 hours a day with the setting of 30 FPS Highest video quality and High resolution Disk Saving Mode The system will start recording only when a motion on the screen is detected 24 hours a day shown as a green bar on Schedule Configuration panel with the setting of 30 FPS Normal quality and Normal resolution You can adjust the sensitivity interval and detection area of motion detection in schedule Configure page 25 Cam Viewer Lite Minor Mode The system will start recording only when a motion on the screen is detected 24 hours a day shown as a green bar on Schedule Configuration panel with the setting of 15 FPS Low quality and Low resolution You can adjust the sensitivity interval and detection area of motion detection in schedule Configure Adjust the scheduled setting Even when you have setup the Modes through the Load function you can still manually make changes of it Option 1 Move the cursor to the Time Bar to change the length of it or move the bar sideway to change the start and stop points Option 2 Click the Configure icon or double click schedule information on the screen highlighted in blue get Encoding Options panel and change the setting that you want to Note The time schedule setting is based on 15 minutes You may setup the schedule for each channel camera by repeating the process above or applying the setting of a camera to all other cameras 6 2 Insert a new schedule manu
Download Pdf Manuals
Related Search