4-CHANNEL H.264 DVR - Security Warehouse Security Warehouse
Contents
1. SEARCH MENU the user can choose TIME SEARCH or EVENT SEARCH mode then press ENTER to play back Page 14 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com SEARCH 7 Me x Oe TIME EVENT URGENT a pelts SEARCH SEARCH SEARCH i o S 2008 08 SUN MON TUE WED THU FRI SAT 1 2 0 3 1 during playback press ENTER button to pause and press ENTER again to continue 2 During playback press REWIND or FORWARD button to check the recorded information by the speed of X2 or X4 or X6 3 Press CANCEL to stop playing Mouse Page 15 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com Click the MENU on the left of the bottom status bar and choose SEARCH to enter playback SEARCH MENU and the user can double click to choose playback mode to play back 2 8 Record Time Search Front panel TIME SEARCH eLCLUIB OG zi iC Press PLAY button to enter playback SEARCH MENU 2 Press LEFT or RIGHT button to choose TIME SEARCH mode 3 Press LEFT or RIGHT button to choose date and time and press UP or DOWN button to change the date and time press ENTER button to play back 4 Press CANCEL button to quit from TIME SEARCH MENU Mouse 1 Click the MENU on the left of the bottom status bar and then choose SEARCH2. Save CamHo O1 Image Save Image All Frint CamHo O01 Image Reset CamHo 01 Channel Reset Channel ALL P7 1 Save CamNo 01 Image Save the channel 1 image as JPG format Right click one channel picture such as CamNo 04 to save the Channel 4 2 Save Image All Page 51 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com Save all images as JPG format 3 Print CamNo 01 Channel Print the channel 1 image Right click one channel image such as CamNo 03 to print the Channel 3 4 Reset CamNo 01 Channel Reset the Channel 1 image 5 Reset Channel All Reset all channels images A Connect M Connect 6 Click to stop the remote viewer click again to input the password and click OK to enter the remote viewer 7 Recording to AVI format AVI Click 7 and ar will change to blue color to start recording Click AVI z again to stop recording The AVI file can be played by WINDOWS player Note When recording to AVI file the live channel images are not smooth 8 Recording to DVR format i Backup Loca Click and will change to green color to start recording FHackup Click again to stop recording The file can only be played by DVR Local rec C Documents aT dp Note Setting the save path in the before recording The remote recording and local recording can be operated simultaneously 5 2 Menu 1 Live Control the PTZ
3. the area color around the moving object is red during motion alarm 3 5 SENSOR Move the cursor to SENSOR icon and press ENTER button to enter the SENSOR sub menu ON SENSOR SENSOR Cin ALN NEL Ai SENSOR TYPE NORMALC OPEN POST RECORDO T HME 6 SEC BUZZER TIME EC SE ALARM TIME SEG 1 SENSOR CHANNEL Press LEFT or RIGHT button to choose the sensor channel ALL is to choose all channels 2 SENSOR TYPE NORMAL OPEN Open the sensor NORMAL CLOSE Close the sensor 3 POST RECORD TIME 1 Set up the time after the sensor alarm happened the maximum time is 60 seconds The default time is 5 seconds 2 Can only used in SENSOR record mode 4 BUZZER TIME The buzzer ring when detecting the sensor alarm the maximum ring time is 60 seconds 5 ALARM TIME Control the time of outside alarm devices when detecting the motion the maximum time is 60 seconds Page 33 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 3 6 SCHEDULE Move the cursor to SCHEDULE icon and press ENTER button to enter the SCHEDULE sub menu z i air i 7 Br aa SCHEDULE O YX aa a mL E Oo 7 4 6 8 10 12 14 16 16 20 22 24 A LWT S If enter MOTION sub menu during recording the DVR will automatically Front panel stop recording 1 Press MUTE button to choose ALWAYS record mode Press AUTO button to choose MOTION record mode Press BACKUP button
4. It displays the software version of DVR the master hard disk information and the slave hard disk information HDD OVERWRITE the system will automatically overwrite if it set to ON The DVR will stop recording when hard disk is full if HDD OVERWRITE set to OFF 3 Press CANCEL button to quit from system menu 2 14 PTZ Control Page 20 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com front panel 1 In the full channel mode press PTZ button on front panel or remote controller to enter PTZ function Press UP DOWN LEFT or RIGHT button to control the rotation of PTZ then press ENTER to enter the pre set menu Note Only Keep pressing UP DOWN LEFT or RIGHT button to control the rotation of PTZ when button released the PTZ will stop rotation Press MUTE button to enable IRIS function Then keep pressing LEFT or RIGHT button to adjust the iris of camera button released to stop adjusting the iris Press AUTO button to enable AUTO function the PTZ will automatic rotate press again to stop Press BACKUP button to enable ZOOM function of camera press LEFT or RIGHT button to adjust the zoom of camera button released to stop ZOOM function Press MODE button to enable FOCUS function of camera press LEFT or RIGHT button to adjust the focus of c
5. Playback Speed 100f s PAL Record Audio Selectable ee CH1 CH2 CH3 CH4 OFF Parameter Alarm Rec Time 5 60 seconds Always Motion Alarm Schedule Setting Always Sensor Alarm OFF Motion Detection Sensor Record Mode Manual Schedule Always Emergency Manual Network SYSTEM SETUP Motion Detection ON onor Motonarea n0 seene Always Motion Alarm Schedule Setup Always Sensor Alarm OFF Page 48 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com V PC Viewer Operation 5 1 Steps of operation 1 Install the PC viewer software from CD to your PC As following MAE AHE Bev Wa TAG Haha O O S Pe exe X D BX am O C Documents and Settings Administrator S iH Wetvi ewer MPA PE HHES 1 11 MB Y RKE P1 Het ewer Hetwork Viewer 2 Double click and display as following Live PlayBack FilsPlay PIZ Control eee Oo ee P2 3 Click the SETTING button marked with red color display as following Page 49 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com Network Viewer Setting Network AVI Save TF Adar 192 16G 1 11 Video Size Follsi Halfsi Video TSC i PAL TEE NESE ee ann hee 22010 ae io Frame Ser Common Network Mox t care 7 Cinepak Codec by Radius Intel Indeo R Video R3 Z Intel Indeo R Video R32 Nes Chennci yy Intel Indeo Video 4 5 Intel IYUV codec
6. USB mouse and infrared remote controller operation Support 1 SATA port HDD more HDD support optional 4 CH alarm inputs 1 CH alarm control output Multiplex operation live amp record amp playback amp network can be operated at the same time Support network function remote monitor remote playback remote record and so on Live display 480fps NTSC 100fps PAL CIF resolution record 120fps NTSC 100fps PAL Page 3 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com I Content System Installation 1 1 Accessories 1 2 Introduction of the front panel 1 3 Introduction of the rear panel 1 4 Connection of the rear panel 1 5 Introduction of the infrared remote controller II Operation Guideline II 2 1 Turn on the DVR 2 2 Turn off the DVR 2 3 Viewing Operation 2 4 Manual record operation 2 5 Alarm record operation 2 6 Schedule record operation 2 7 Playback operation 2 8 Record time searching 2 9 Record group searching 2 10 Event group searching 2 11 USB backup 2 12 CD ROM backup Optional 2 13 Checking system information 2 14 PTZ control 2 15 Password input System Menu Setup 3 1 Main menu 1 Front panel 2 Mouse 3 2 CAMERA 1 CHANNEL 2 COLOR 3 TITLE 4 PTZ PROTOCOL 5 PTZ ADDRESS 6 EVENT POPUP 7 MAIN ROT TIME 3 3 RECORD 1 CHANNEL 2 RESOLUTION 3 PRE RECORD Page 4 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 4 FPS 5 Q
7. firmware Page 45 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com F h U 7 g pi N t WARNING _ FIAMWARE UPGRADE MAY MA KE THE SYSTEM FATAL ERAR OR CONTINUE Note After connecting the USB device it needs to wait for ten seconds then upgrade firmware 9 FACTORY RESET If DVR in disorder sometimes it needs to reset again to factory default setting as following WARNING SYSTEM SETUP WILL IWITI ALIZE CONTINUE Press ENTER button to reset to factory default setting or press CANCEL to Page 46 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com quit 10 LANGUAGE Press LEFT or RIGHT button to select menu language include Chinese English Korean and Japanese Other languages can be built in if need Page 47 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com IV Default Setting The Default setting for the DVR by the manufacturer is as following User can change the setting according to the requirements When recovering to default setting you can choose FACTORY RESET in SYSTEM SET sub menu and reset all setting to default T setting Default tem Optional Setting a Buzzer JON ONOFF General System Log System Log ON ON OFF Setup Video System NTSC NTSC PAL Video Color 50 i 1 100 adjustable 120f s NTSC Record Speed 100f s PAL Record 1 2D1 Resolution 120f s NTSC
8. operation of DVR When controlling PTZ operation first select one channel display then can control PTZ Press UP DOWN LEFT and RIGHT icons to control the PTZ operation for cameras ry ZOOM Press to zoom in and press Q to zoom out release the button to stop the zoom FOCUS Press E to adjust focus far from object press ae to adjust focus near from object release the button to stop adjusting focus IRIS Press Ge to adjust iris open press to adjust iris close release the button to stop adjusting iris Page 52 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com AUTO Left click the button to start the auto rotation press again to stop the auto rotation 2 Playback Click the button to play HDD data of DVR on your PC T to Foc Sira d II Ga CEC Sec A TH 82 CEVOfe Size 254 e eis Lee Ed ee a a ee ity wae on feel Te TERES oe x Tee ie E HE a ae ee a ee Tren lilar ree a ian 54 7 0 be rarc Sire 3025 r Ertl AST Care a eg E I JI sia Ty a Pe B E ese F Sps sd BS fpr Bitrate i tack Disgyn pi t tting wz E Backup i WH ec Start SP Ree Stop _ S aa ee Bonn Feild Liva PayBack Pie ay O V sih ooog EE E m Time Search z ae je ES Bree Bat ZB hacky P8 1 Move the cursor to the date box to choose the date of the recorded data 2 Move the cursor to the time box to choose the time of the recorded data 3 Click gt
9. to left No 1 1 IR alarm signal input No 2 2 IR alarm signal input No 3 3 IR alarm signal input No 4 4 IR alarm signal input No 5 Alarm output GND Ground No 6 Alarm output N C Normally Closed No 7 Alarm output N O Normally Open No 8 Alarm output COM Common No 9 RS 485 A No 10 RS 485 B 1 5 Infrared remote controller Page 10 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 13 15 17 19 display 21 Page 11 of 55 MENU aT GOHO D PUOUGUG REMOTE CONTROL POWER Turn on off the DVR CANCEL Quit from the menu PTZ PTZ control PLAY Playback gt gt Fast forward gt CH2 RIGHT lt CH4 LEFT MUTE Audio on off MODE Display mode 2 MENU DVR menu 4 BACKUP Backup the information 6 REC Record 8 lt lt Rewind 10 ft CH1 UP 12 CH3 DOWN 14 ENTER Enter control 16 AUTO Automatically switch channel 18 EF QUAD Horizontal two pictures display 20 mm Vertical two pictures Three pictures 1 22 Three pictures 2 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com II Operation Guideline Before using the DVR please set up system according to user guide Keep the machine work in the right way When installing new hard disk it must be formatted by DVR system menu 2 1 Turn on the DVR 1 Before power on please make sure all the items in the Security Not
10. C 707C Note Specifications and appearance are subject to change without notice Page 55 of 55
11. CANCEL button to stop playback 16 lt lt REWIND button During playback repeat pressing the button to rewind play and the speed can be selected to X2 X4 or X6 17 gt gt FAST FORWARD button During playback repeat pressing the button to fast forward play and the speed can be selected to X2 X4 or X6 18 USB port Connection with USB disk for updating firmware and backup files Can not use USB mouse to this port 19 Mouse port Connection with USB mouse 20 Power indicator light After DVR turned on the light is on When pressing POWER button to turn off the DVR the light is flickering 21 Network connecting indicator light When DVR connected to network the light is on Otherwise the light is off 22 Recording indicator light When DVR is recording the light is on Otherwise the light is off 23 Playback indicator light During DVR playback the light is on Otherwise the light is off 24 Receiver of remote controller 1 3 The rear panel 1 Video inputs CH1 CH4 2 Video output 3 Audio output 4 Audio inputs CH1 CH4 5 VGA output optional 6 RJ 485 Ethernet 7 RS 485 PTZ 8 The alarm sensor inputs 9 DV12V 4A power input 10 Grond 1 4 The connection of rear panel Page 9 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com CAMERAT CAMERA4 MIC 1 MIC 4 The alarm sensor inputs RJ 45 1987654321 0000000000 B A From right
12. Codec H 26 4 al Indeo video 5 10 ffdshow Wideo Codec Local rec ADVI xvid MPEG 4 Codec YFED Simple Profile Adjust window slz 19T i M Hide title bar in full screen P3 IF Addr ae Input IP Add in the and click the to exit the menu M Connect 4 Click the icon and display as following Network Viewer T System 192 188 1 11 l Parsword Carcel lt Liva Playback FilePlay PTI Central LJ EH Eq Ef 0 gt amp auto ls Q Q Cl tg Su Bat Bra P4 The DVR IP address in the Ae E Input password 9 the box Click Cancel to exit click z to enter remote viewer in Note No need password for DVR default setting only input IP address and click Page 50 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com After open of the remote viewer click display mode icons on the bottom right to change the display mode as following Network VYicwer atl Fe 4510 ot LIE 2335 D l r yi EOE Si ra 456 OC Sire 3204 m 03 Saree Su zelzvel Pigre Si ee 23541 bP ove Ti re Hi5 m Speed BS fpr Bi trate 1 Taek pisconn EI rotting A gt SS Backup WP ec Stat W ec Stop Somn Fall o Ta forai Live PlspBack FilePlay i are obo e oo Roe Bree Bal SB Daci P5 P6 Oo Double click the one channel picture to display the full channel picture double click again to go back to quad display
13. ECT to set up detection area press UP DOWN LEFT and RIGHT buttons to move the cursor and set up the area press the ENTER button to confirm the area then press UP DOWN LEFT and RIGHT buttons to move cursor to a new grid press ENTER button to set up the new area The detection area display in different color Press MENU button and select EXIT to quit 4 Choose CLEAR to clear the detection area operation is same with 3 5 Press MENU button and select EXIT to quit Mouse 1 Left click the SET on the right of MOTION AREA to detection area 2 Right click the mouse and display SELECT CLEAR and EXIT 3 Choose SELECT to set up detection area keep left click and drag to choose the detection area The detection area display in different color Right click the mouse and choose EXIT to quit 4 Choose CLEAR to clear the detection area operation is same with 3 5 POST RECORD TIME 1 Set up the time after the alarm happened the maximum time is 60 seconds The default time is 5 seconds 2 Can only used in MOTION record mode 6 BUZZER TIME The buzzer ring when detecting the motion the maximum ring time is 60 seconds 7 ALARM TIME Control the time of outside alarm devices when detecting the motion the Page 32 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com maximum time is 60 seconds 8 MOTION TRACE When the MOTION TRACE is on
14. J8104 4 CHANNEL H 264 DVR www best china security supplies com ar a EMERGENCY SEARCH r ak T i a ty maa m u0 i MaI Pa A A A A Po a RR gy oni ay ET E el fF Gi a Po Pb PD A P a t U T non 0 0 8 2 2 Ful w E w E ge eS amp amp a O y m o a a o fh hi hi ra 1 Press PLAY button on the front panel to enter playback SEARCH MENU 2 Press LEFT or RIGHT button to choose EMERGENCY SEARCH mode 3 Press UP or DOWN button to choose date and time and then press ENTER button to play back 4 Press CANCEL button to quit from EMERGENCY MENU Mouse 1 Click MENU on the left of the bottom status bar choose SEARCH to enter playback SEARCH MENU then double click to choose EMERGENCY SEARCH mode to play back 2 Click the STOP on the bottom playback status bar to stop playback 2 10 USB Backup Front panel 1 Insert the USB device to DVR USB port after 10 seconds press BACKUP button to enter BACKUP MENU 2 Press LEFT or RIGHT button to move the cursor and press UP or DOWN to set up the start time of backup and the end time of backup 3 Choose the backup format to AVI format DVR default format press ENTER button to start backup 4 Press CANCEL button to quit from BACKUP MENU Note The USB device must be remove
15. ME SETUP Press ENTER button to set up the time as following TIME Aroro O89 26 FORMAT ASIA TIME Setting the DVR system date and time Page 41 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com FORMAT The date and time display types ASIA EURO and US Front panel 1 Press LEFT or RIGHT button to move the cursor Press UP or DOWN button to set up the date and time 2 Press ENTER button to save and quit 3 Press CANCEL button to quit the menu without save Mouse 1 Choose TIME SETUP in the SYSTEM sub menu and left click the SET on the right to enter TIME SET sub menu 2 Move the cursor to choose items and move the middle wheel of the mouse to set up the date and time 3 Press the circle on the top right to save and quit 1 Press the CANCEL icon to quit the menu without save 2 SYSTEM PASSWORD Move the cursor to choose the SYSTEM PASSWORD and press ENTER button to enter SYSTEM PASSWORD sub menu as following PASSWORD CONFIRM PASSWORD The menu password CONFIRM Repeat and confirm the menu password Front panel 1 Choose PASSWORD Press ENTER button to input password 2 Press UP DOWN LEFT RIGHT button to select the characters of Page 42 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com keyboard box Press ENTER button to input the characters Move the cursor to the
16. UALITY 6 RECORD MODE 7 AUDIO 8 SCHEDULE 3 4 MOTION 1 CAMERA CHANNEL 2 MOTION ENABLE 3 SENSITIVITY 4 MOTION AREA 5 POST RECORD TIME 6 BUZZER TIME 7 ALARM TIME 8 MOTION TRACE 3 5 SENSOR 1 SENSOR CHANNEL 2 SENSOR TYPE 3 POST RECORD TIME 4 BUZZER TIME 5 ALARM TIME 3 6 SCHEDULE 3 7 NETWORK 1 IP MODE PORT IP NETMASK GATEWAY NAME SERVER DDNS NAM SF WwW NY 3 8 BACKUP 3 9 SYSTEM iF SYSTEM PASSWORD SYSTEM INFO VIDEO FORMAT LOG VIEW LOG SET DISK FORMAT FIRMWARE UPGRADE FACTORY RESET SHON H mn BB WH KY TIME SETUP 10 LANGUAGE IV Page Default Setup 5 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com V PC Viewer Operation VI Parameters Table Page 6 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com I System Installation 1 1 Accessories Open package the accessories should include 1 User s manual 1pcs 2 DC12V 4A power adaptor 1pcs 3 Screws 1 set 4 CD with PC software Ipes 5 Infrared remote controller 1pcs 6 USB port mouse Ipes 1 2 Introduction of the front panel Function of the front panel 1 t P UP button In QUAD display mode press t UP button to display CH1 Under menu operation it is UP key 2 gt RIGHT button In QUAD display mode press RIGHT button to display CH2 Under menu operation it is RIGHT key In PTZ
17. XJ8104 4 CHANNEL H 264 DVR www best china security supplies com DVR 4CH Stand alone digital video recorder User s Manual 4 CHANNEL H 264 DVR Page 1 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com Warnings Safety This device is an INDOOR equipment and NOT water resistant In order to avoid dangers of short circuit or electric shock do NOT expose it in rainy or moist environment In case of any solid or liquid matter get into the device case turn off the power immediately and ask for qualified technicians to check it before restart This device is a precise equipment ask qualified technicians or distributors for help if any malfunction Do NOT attempt to repair any unit of it by yourself Power Supply The digital video recorder applies DC12V 4A power adaptor The voltage of the power must be verified before use When this machine is not be used for a long time pull plug of power adaptor Using Place Do NOT put this device near by a radiator or heat ventilator Do not expose to sunlight or dust Keep away from magnetic force or vibration Avoid humidity or water Most important connect this device to the ground to avoid electric shock Notice Any re construction or change maybe leads to destroy of this machine which brings many inconveniences to user Therefore do not disassemble or modify this unit Otherwise the dealer will not be responsible for it The dam
18. ages caused by following incorrect operation are not belong the range of the warranty even if itis within the warranty period Using incorrect power adaptor The damages are caused by natural disasters such as fire flood tide and lightning etc Changing HDD Page 2 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com Feature Non pc stand alone security digital video recorder with embedded operation system H 264 compression format Safe and friendly power on power off function Chinese English Korea Japanese languages supported Audio and video real time recording and playback function Support NTSC PAL video system 4CH video inputs 1CH monitor output 1CH VGA output optional 4CH audio inputs 1CH audio output High quality image sharpness sharpness and color adjustable for each channel Support multiple zoom by mouse Support auto switch for each full screen display Display modes PIP full screen 2 images 3 images 4 images Recording modes manual recoding scheduled recording alarm recording and motion detection recording Image quality highest high normal low Detailed event log support Searching modes time amp data searching event recording searching recording group searching Support fast forward and fast rewind X2 X4 X6 Backup modes network backup USB 2 0 backup CD ROM backup optional Support RS 485 PTZ control speed dome camera and preset positions operation Support
19. amera button released to stop FOCUS function Press CANCEL button to quit from PTZ function Pre set Position Function Page 21 of 55 1 After entering PTZ control mode press ENTER button to enter the setting menu of pre set position XJ8104 4 CHANNEL H 264 DVR www best china security supplies com d SETPRESET PRESET AUX SPEED 2 Press UP or DOWN button to move cursor and press LEFT or RIGHT button to select setting number then press ENTER button to confirm 3 PRESET a After entering the SET PRESET menu set the PRESET to 1 and select SAVE then press ENTER button to save current PTZ position to 1 b Quit from SET PRESET menu and back to PTZ mode press LEFT or RIGHT button to move the speed dome camera to next pre set point enable ZOOM IRIS or FOCUS function then press LEFT or RIGHT button to adjust a position of PTZ Press ENTER button to enter SET PRESET menu set the PRESET to 2 and select SAVE then press ENTER button Using the same way to set other pre set position The DVR support 255 pre set positions In SET PRESET menu set the PRESET to one number then select LOAD icon and press ENTER button to move PTZ to reach its pre set position 4 The setting of the pre set positions refers to the user manual of speed dome Mouse 1 Left click MENU on the left of the bottom s
20. button to select the letters of keyboard box Press ENTER button to input the letters Move the cursor to the symbol lt of keyboard box and press ENTER button to delete the chosen letters 2 Move the cursor to ENTER of keyboard box and press ENTER button to save and quit menu 3 Press CANCEL button to quit from menu without save Mouse 1 Move the cursor to IP MODE in NETWORK sub menu Left click the SET icon on the right to enter IP mode keyboard box 2 Click the letters and click ENTER to save and quit Right click to quit the menu without save 4 NETMASK The setting method is same with IP setting 5 GATEWAY The setting method is same with IP setting 6 NAME SERVER The setting method is same with IP setting 7 DDNS Press ENTER button to enter DDNS setting menu 1 SERVER Open or close the DDNS server Page 36 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 2 HOST NAME Input the DDNS domain name 3 USER NAME Input the DDNS user name 4 PASSWORD Input the DDNS domain user password 5 xDSL ROUTER The default is OFF DONS SERVER HOST NAME USER NAME PASSWORD xDSL ROUTER OFF 3 8 BACKUP 1 When the DVR connect the backup device CD ROM or USB for about ten seconds move the cursor to BACKUP icon and press ENTER button to enter the BACKUP sub menu Page 37 of 55 XJ8104 4 CHANNEL H 264 DVR www best ch
21. choose ROTATION to Start auto switch function 3 Zoom of the images only for mouse operation Mouse Left click the MENU on the left of the bottom status bar choose ZOOM to enable Zoom function keep the left click of the mouse and drag it to select zoom erea If selecting full screen it will return back the normal size Right click the mouse to quit from Zoom function Page 12 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 2 4 Manual record 1 Connect video inputs 2 Choose the record modes always record emergency record manual record schedule record The factory default is always record 3 Press REC button to manual record 4 channels video 4 Press REC button to stop manual record 5 During recording if the hard disk is full and the system set to automatically overwrite then the recording will not be interrupted and it begins to overwrite the earliest recorded area if the system set to disable overwrite it will stop recording when the hard disk is full Note Manual recording can only be operated by front panel or remote controller the mouse can t operate manual record 2 5 Alarm record 1 Alarm record cannot be started by REC button 2 Alarm record can be activated by alarm input signal or motion alarm so need to check alarm inputs first and make sure the inputs are stable and reliable Referring to sensor setup and motion detection setup 3 S
22. d after backup finished Mouse 1 Click the MENU on the left of the bottom status bar then click SYSTEM SETUP to enter the SYSTEM MENU 2 Choose BACKUP to enter BACKUP MENU click the SETUP to set up Page 18 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com the parameters 3 Click the small circle symbol on the top right to enter backup condition 2 12 CD ROM Backup Optional function 1 Before using the CD ROM to backup please install the CD ROM burners 2 Put in the blank CD to CD ROM and press BACHUP button to enter BACKUP MENU 3 Press LEFT or RIGHT to move the cursor press UP or DOWN button to set the start time of backup and the end time of backup 4 Choose the backup format to AVI format DVR default format press ENTER button to start backup Note CD ROM backup is the optional function this type of DVR can t support CD ROM function 2 13 Checking System Information FIRMWARE VER PRI MASTER SLAVE NONE SEC MASTER NONE SLAVE NONE HDD OVERWRITE 1 Press MENU to enter DVR system menu 2 Choose SYSTEM menu move the cursor to SYSTEM INFORMATION menu then press MENU button to enter DVR system menu Page 19 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com FIRMWARE VER PRI MASTER SLAVE NOME SEC MASTER NONE SLAVE NONE HDO OVERWRITE OIN
23. delete the chosen letters 2 Move the cursor to ENTER of keyboard box and press ENTER button to quit from the menu 3 Press MENU button to save and quit from menu 4 Press CANCEL button to quit from menu without save Mouse 1 Enter the CAMERA sub menu move the cursor to Title and left click the SET to enter keyboard box 2 Click the letters by using mouse to set title click ENTER to quit from SET menu or right click the mouse to quit from the menu 3 Press SAVE to save and quit from the menu 4 Press EXIT to quit from the menu without save Page 27 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 4 PTZ PROTOCOL 1 The DVR can support PELCO D and PELCO P When setting it to OFF in the menu can close PTZ function 2 The default baud rate 2400bps for PELCO D 9600bps for PELCO P 5 PTZ ADDRESS The default address for PTZ control as following Camelia 6 EVENT POPUP Turn on or turn off event record The DVR can record the event time and the event can be recorded and saved in the event list 7 MAIN ROT TIME Setting the switch time for displaying each channel in turn 3 3 RECORD Move the cursor to RECORD icon and press ENTER to enter the RECORD sub menu e RECORD CIH ATNINIE I AWE RESOLUTION oil PAE RECORD oi FPS 5 00 OuAL IT Y Fi RECORD MODE JF AUDIO 3 F SCHEDULE sc G F F H EDULE I
24. ess CANCEL button to quit from the menu In playback mode repeat pressing the button to start playback one frame by one frame then press ENTER button to return normal playback In PTZ operation mode press BACKUP button to enter zoom control then adjusted by lt button and button Press it again to quit zoom control POWER button In display mode long press the button for more than 2 seconds and DVR will display power on off dialog box press CANCEL button to give up turning off DVR and return back to display mode Press ENTER button to turn off DVR If DVR turned off by POWER button can press POWER button again to turn on DVR 14 REC button Page 8 of 55 When setting DVR record mode to OFF press the button to start emergency record manual record the color of REC icon on the bottom status bar becomes blue Press REC button again to stop emergency record manual record Note When DVR set to schedule record mode or always record mode the emergency record mode can t be started XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 15 PLAY button In display mode or record modes press PLAY button to enter record events menu Press LEFT or RIGHT button to choose the playback modes time amp date searching mode or events searching mode Then press ENTER button to play back recorded information press
25. etting the record mode before recording 4 As long as the alarm input signal is effective the alarm keeps recording When no alarm input signals alarm recording will keep recording for the time set in menu and then stop recording automatically 5 Entering menu to change recording mode if no need alarm recording if there is a password for setup input correct password 2 6 Schedule Record Page 13 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com a i SCHEDULE SIGIH EIDLUIIAE 0 2 4 6 B 10 12 14 16 18 20 22 24 1 Schedule record starts or stops recording automatically according to the pre set time It set in a pre set timetable for example to set a periodical recording 2 There are 5 schedule record lists for your choice choose the suitable schedule accord to the requirement 3 Before using this function make sure the time setting correctly 4 Only in the menu can change and quit schedule recording Note Different color symbols indicate the different record modes the detailed information as following Normal mode The green symbol in the middle of the screen Always mode The blue symbol in the middle of the screen Motion detection alarm mode The red symbol in the middle of the screen Sensor alarm mode The orange symbol in the middle of the screen Schedule mode The purple symbol in the middle of the screen 2 7 Playback Front panel 1 Press PLAY button DVR will display playback
26. f enter RECORD sub menu during recording the DVR will stop recording automatically Page 28 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 1 CHANNEL Choose the channel for recording All is to choose all channels 2 RESOLUTION The DVR supports D1 1 2D1 CIF recording D1 6 25f s for each channel 1 2D1 12 5f s for each channel CIF 25f s for each channel real time Different resolution has different image quality D1 is the best 3 PRE RECORD When PRE RECORD is on and the recording mode is alarm record motion detection mode sensor mode the DVR can record ahead 2 seconds before the alarm happened This ensures the alarm event is complete 4 FPS TOTAL 100 71 The DVR can set frame rate for each channel and set to real time recording PAL 25fps NTSC 30fps Note Under CIF resolution the frame rate is maxmum real time 5 QUALITY The image quality can be set HIGHEST HIGH STANDARD LOW 6 RECORD MODE 1 The record mode can be set ALWAYS MOTION SENSOR SCHEDULE OFF 2 When setting OFF the DVR can start emergency record manual record 7 AUDIO 1 Turn on or turn off audio record It can record 4 channels audio 2 The DVR can record the 4 channels audio when selecting ALL If record only one channel s audio don t choose ALL Page 29 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 8 SCHEDULE Choose the DVR schedule list if the record mode is sc
27. hedule record The default is SCHEDULE 1 3 4 MOTION Move the cursor to MOTION icon and press ENTER button to enter the MOTION Se MOTION CA MIE FA sub menu MOT SENS ITI MOI POs AU ALA MOT O N IlO N IWR EG ZER HM OW CHAN N E NABLE TAY HE A ORD TIME ME ME RAGE If enter MOTION sub menu during recording the DVR will stop recording automatically 1 CAMERA CHANNEL press detection 2 MOTION ENABLE Turn on or turn off motion detection 3 SENSITIVITY Setting the sensitivity for motion detection as following Page 30 of 55 LEFT or RIGHT button to choose the channels for motion XJ8104 4 CHANNEL H 264 DVR www best china security supplies com a a ae SENSITIVITY SENSITIVITY SPATIAL BLACK LEVEL WHITE LEVEL 1 SENSITIVITY Setting Sensitivity 2 SPATIAL Setting the area for motion detection 3 BLACK LEVEL Black level sensitivity 4 WHITE LEVEL White level sensitivity If turn off the sensitivity or setting low sensitivity can affect motion detection function Setting sensitivity according to your requirement 4 MOTION AREA Setting the detection area for the channel as following Page 31 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com Front panel 1 Detection area cover with small green grids 2 Press MENU button to display the setup items SELECT CLEAR EXIT 3 Choose SEL
28. ice at the beginning of this manual are fulfilled 2 Before power on please check the system connection keep inputs and outputs in correct connections 3 Open the cover of the DVR and install the hard disk with the screws and connect the cables 4 After checking all connections without any problems connect the power adaptor and plug in DVR will be automatically turned on 5 If DVR turned off by Power button it can be turned on by POWER button again 2 2 Turn off the DVR 1 Normally do not turn off the machine during recording playing or system setting up Long time press POWER button about 2 seconds to turn off the DVR 2 The DVR will display power off dialog box press ENTER to turn off and press CANCEL to keep power on Note If turn off the DVR during recording the DVR will check the last working condition when turn on again It will take a longer time to start up 2 3 Display mode 1 Press the MODE button to choose the display modes and press channel button to display single channel image Mouse Left click the MENU on the left of the bottom status bar choose LIVE to enter display modes click to choose different display mode 2 Auto switch and display each channel in turn first set the switch time in the menu then press AUTO button on the front panel to start the auto switch function Mouse Left click the MENU on the left of the bottom status bar
29. ina security supplies com BACKUP DISK DEVICE CHANNEL LL hAtntiEt START 008 09 26 END O08 O08 2F7 TOTAL 1 DISK Choose hard disk for backup when more than one hard disks used 2 DEVICE Backup device 3 CHANNEL The channel to backup ALL is to choose all the channels 4 START The start time to backup 5 END The end time to backup 6 TOTAL The size of the backup data 7 AVI The AVI format for backup data 2 Press ENTER button to start backup Page 38 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com t a ar Gi ea n s t WARNING BACKUP COMPLETED 4 Press ENTER button to finish backup After the DVR displays BACKUP sub menu again can remove the backup device 5 When using mouse left click the small circle on top right of BACKUP sub menu to start Page 39 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com to backup the information Note If no backup device the DVR will display warning box when backup WARNING BACKUP DEVICE 3 9 SYSTEM Move the cursor to SYSTEM icon and press ENTER button to enter the SYSTEM sub menu Page 40 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com SYSTEM IME SIERTIU P SYSTEM PASSWORD NENT SYSTEM INFO nl VIDEO FORMAT PAL LOG VIEW Coke SET Ti DISK FORMAT FIRMWARE UPGRADE FACTORY RESET LAN GUAG El laa gt 1 TI
30. ng parameters in menu press MENU button to save and quit menu 8 CANCEL button In menu or PTZ operation mode press this button to quit menu or PTZ operation mode In playback mode press this button to stop playback 9 10 PTZ button In display mode press this button to enter PTZ operation of single channel press CANCEL button to quit from PTZ operation MUTE button In display mode press MUTE button to turn on and turn off the audio In PTZ operation mode press MUTE button to enter iris control then adjusted by lt button and button Press it again to quit iris control l1 AUTO button In display mode press this button to enter auto switch for single channel The user can set the switching time The DVR can display each channel in turn for this time Press again to quit from auto switch In PTZ operation mode press AUTO to control the PTZ auto rotation press again to stop auto rotation of PTZ 12 BACKUP button 13 In display mode if there is USB CD burner to connect the DVR press the button to backup the information Choose the start time and the end time of the backup and press ENTER button to backup When backup is completed the system automatically quit from the menu If there isn t backup device to connect to the DVR the DVR reminds can t find the backup device and pr
31. operation mode press RIGHT button to control the Rightward rotation of PTZ 3 PDOWN button In QUAD display mode press DOWN button to display CH3 Under menu operation it is Downward key In PTZ operation mode press DOWN button to control the Downward rotation of PTZ 4 lt LEFT button In QUAD display mode press P LEFT button to display CH4 Under menu operation it is Leftward key In PTZ operation mode press PLEFT button to control the Leftward rotation of PTZ 5 ENTER button In display mode press this button to enter popup menu press UP or DOWN button to move the cursor Re press ENTER button to enter sub menu Press CANCEL button to quit menu When playback ENTER button is a pause button In PTZ operation mode press ENTER button to enter pre set position function 6 MODE button Repeat pressing this button to display image in different modes PIP1 PIP2 PIP3 two pictures three pictures four pictures In PTZ operation mode press MODE button to enter focus control then adjusted by lt button and button Press it again to quit focus control Page 7 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 7 MENU button Press this button to enter main menu press CANCEL button to quit menu After setti
32. sub menu Click the CANCEL to quit the menu without save parameters 4 Go Back to the main menu right click the mouse to quit the system setup menu 3 2 CAMERA Move the cursor to CAMERA icon and press ENTER to enter the CAMERA sub menu Page 25 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com M fo CAMERA CHA NINIE COLOR E Se CAMO 5 PROTOCOL i ad a ee a R ADDRESS 5 POPUP OFF T i ME ena 1 CHANNEL Press LEFT RIGHT button to choose the channel ALL is to choose all channels 2 COLOR Move the cursor to COLOR press ENTER button to enter the COLOR sub menu press LEFT or RIGHT button to set the parameters Page 26 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com COLOR CONTRAST BRIGHTNESS al SATURATION SHARPNESS 1 Contrast to adjust contrast of the channel image 2 Brightness to adjust brightness of the channel image 3 Hue to adjust hue of the channel image 4 Saturation to adjust saturation of the channel image 5 Sharpness to open or close the image sharpness of the channel image 3 TITLE Front panel 1 Press UP DOWN LEFT RIGHT button to select the letters of keyboard box and change the channel s title Press ENTER button to input the letters Move the cursor to the symbol lt of keyboard box and press ENTER button to
33. symbol lt of keyboard box and press ENTER button to delete the chosen letters 3 Move the cursor to ENTER of keyboard box and press ENTER button to quit from the menu 4 Press MENU button to save and quit from menu 5 Press CANCEL button to quit from menu without save Mouse 1 Move the cursor to PASSWORD and CONFIRM in the SYSTEM PASSWORD sub menu Left click the SET to enter keyboard box 2 Left Click the characters and click ENTER to save and quit Right click the mouse to quit the menu without save Note The default is no password The user can set the password if need The DVR general password is 666666 3 SYSTEM INFO Move the cursor to choose the SYSTEM INFO and press ENTER button to enter SYSTEM INFO sub menu as following SYSTEM INFO FIRMWARE VER PRI MASTER SLAVE NONE SEC MASTER NONE SLAVE NONE HDD OVERWRITE The SYSTEM INFO sub menu displays the following information 1 FIRMWARE VER Display the DVR firmware version 2 PRI MASTER The size and capacity of the first master hard disk 3 PRI SLAVE Page 43 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com The size and capacity of the first slave hare disk 4 SEC MASTER The size and capacity of the second master hard disk 5 SEC SLAVE The size and capacity of the second salve hard disk Note This type of DVR only support one hard disk 6 HDD OVERWRITE a When set
34. t Panel Press Menu button on the front panel to enter system menu press UP DOWN button to move the cursor press ENTER button to enter the sub menu Press LEFT RIGHT button to select item and press MENU button to save and quit Or press CANCEL button to quit from the menu without save The system menu display as following C Setup parameters J Mouse 1 Left click Menu to display the DVR function menu and select SETUP to enter DVR system setup menu Page 24 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com CIA MOL CTA SE T UP A RG A Gee A OT AT I ON A UOO TON pou ls MENU 1 GPA LD ERE ae 17 52 26 LIVE Choose the display image mode SETUP Enter the system setup menu SEARCH Enter the information playback menu MOTION Open or close the motion alarm function ZOOM In the full channel mode select the ZOOM function Only using mouse to operate the ZOOM function for the image PTZ In the full channel mode select PTZ to control PTZ function ROTATION Select the auto switch function for each channel AUDIO Turn on off audio QUIT Turn off the DVR 2 In the sub menu left click a small circle symbol on the top right to save and quit menu 3 Left click the icon in the menu to enter sub menu use the middle wheel of mouse to change parameters and then left click SAVE to save the parameters and quit the
35. tatus bar choose PTZ to enter PTZ control mode 2 Left click UP DOWN LEFT or RIGHT icons to control the rotation of the PTZ 3 Left click Z F IP to enable ZOOM FOCUS and IRIS function respectively then left click the LEFT or RIGHT to adjust Page 22 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 4 Left click P to enter SET PRESET menu 5 Set the PRESET and SAVE refers to the user manual of speed dome Note Before operating PTZ function it is necessary to check the connections of PTZ The pre set position is used for speed dome that can support pre set function 2 15 Password Input If the password protection is enabled it needs to input the correct password when entering the DVR menu 1 Press MENU button and display password dialog box 2 Press MENU button again to display the keyboard box and press UP DOWN LEFT or RIGHT button to move cursor then press ENTER button to input password and select lt on the keyboard box to clear Input the correct password and move the cursor to ENTER press ENTER button to confirm the correct password 3 After quit from the keyboard box press MENU button to enter the system menu Page 23 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com II System Menu Setup 3 1 Main menu Fron
36. ting to ON the DVR system will automatically delete and cover the first group information of hard disk and no stop recording if the hard disk full recorded b When setting to OFF the DVR system will stop recording if the hard disk full recorded 4 VIDEO FORMAT The DVR can set to PAL or NTSC system 5 LOG VIEW The DVR can record the time of event if log is enabled 6 LOGSET Move cursor to LOG SET in SYSTEM sub menu and press ENTER button to enter LOG SET sub menu as following LOGISET MOTION SENSOR MANUAL BOOTING MOTION Setting to ON to save motion alarm event in the log SENSOR Setting to ON to save sensor alarm event in the log MANUAL Page 44 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com Setting to ON to save manual recording event in the log BOOTING Setting to ON to save DVR switch on and switch off event in the log 7 DISK FORMAT Move the cursor to choose the DISK FORMAT and press ENTER button to enter SELECT DISK sub menu as following i B A P i F E i dli 5 aif a ct E of x k E a SELECT DISK DISK VOnom FIRST REC TIME 2008 09 2 LAST REC TIME Press LEFT or RIGHT button to choose the hard disk for format ALL is to format all hard disk Press ENTER button to format hard disk Press CANCEL button to exit hard disk format 8 FIRMWARE UPGRADE Connect USB device with the latest firmware and press ENTER to upgrade
37. to choose SENSOR record mode Press MODE button to close schedule record mode 2 Press UP DOWN LEFT and RIGHT buttons to move the cursor Press MENU button to set schedule include time 24 hours and day one week There are 5 groups of schedule time can be set 3 Press ENTER button to quit Mouse 1 Left click to choose SCHEDULE mode 2 Keep left click and drag to set schedule time 3 Left click the small circle on the top right to save and quit the menu Left click CANCEL icon to quit the menu without save 3 7 NETWORK Move the cursor to NETWORK icon and press ENTER button to enter the NETWORK sub menu Page 34 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com El NETWORK oF oe T aor woe E Fo GF ha PF OMO DIE PORT P NETMASK GATEWAY NAME SERVER DONS DOP Om i PJ 1 IP MODE Choose the LAN IP mode include static IP and dynamic IP Press LEFT and RIGHT button to choose IP mode The default mode is static IP 2 PORT Set the server port of network Press LEFT and RIGHT button to set the port The default is 3100 3 IP Set the LAN IP address of the DVR Press ENTER button to enter the IP setup keyboard box Page 35 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com ENTER Front panel 1 Press UP DOWN LEFT RIGHT
38. to enter playback SEARCH MENU then double click to choose TIME SEARCH mode to play back 2 When choosing TIME SEARCH to playback the middle button of mouse can be used to change time 3 Click the STOP icon on the bottom playback status bar to stop playback Page 16 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com 2 9 Record Event Group Search Front panel RECORD TIME EVENT INFO MOLOWA2TS Y aCe CMe Gey 1 09 EMERGENCY O EMERGENCY ioo EMERGENCY E EMERGENCY oo EMERGENCY 0 9 EMERGENCY 0a EMERGENCY og EMERGENCY o86 EMERGENCY Pk RJ PD E Ee e e aya 46 oe oo E E a on S pH 62 A P Ao Ra F AJ R oo O O O O O OlgO RF BG PF RF Fo F RJ Pa R g D E D a a o ch E O o oO eel ee Se Sy Se i 4 i 1 Press PLAY button to enter playback SEARCH MENU 2 Press LEFT or RIGHT button to choose EVENT SEARCH mode 3 Press UP or DOWN button to choose date and time and then press ENTER button to play back 4 Press CANCEL button to quit the menu Mouse 1 Click the MENU on the left of the bottom status bar choose SEARCH again to enter playback SEARCH MENU then double click to choose EVENT SEARCH mode to play back 2 Click the STOP button on the bottom playback status bar to stop playback 2 10 Emergency Search Front panel Page 17 of 55 X
39. to play record Click to play forward one frame by one frame Click D to play rewind one frame by one frame Click Q to stop playing Note Before playback need to log in by password first When playback finished need to log in by password again 2 FilePlay Open and play backup files from viewer or from DVR copies Speed 0 20 E Fr om To A Current P12 pa Open Click to open backup file then click the PLAY button to play it Rec Start 3 Click h to start DVR recording click lt SOPAR to stop DVR recording Page 53 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com a PF kec Start will change to red color If click During recording files will be saved in DVR s HDD notin PC s HDD Note Setting the record mode to Manual Record before using this operation the recorded Page 54 of 55 XJ8104 4 CHANNEL H 264 DVR www best china security supplies com VI Parameters Table Compression H 264 Pea ICA Vea Output Frequency 60 Hz Resolution 1024 x 768 CIF NTSC 120fps 352x240 PAL 100fps 352x288 Frame and 1 2D1 NTSC 60fps 720x240 PAL 50fps 720x240 Resolution D1 NTSC 30fps 720x480 PAL 25fps 720x576 All 4channels record at high quality mode 600M H Space HDD Port SATA hard disk 10M 100M Ethernet port Confidential Password Protection Function Power 20W Consumption No Environment Work Temp 5C 50 C kik s Storage Temp 20
Download Pdf Manuals
Related Search