TECHCONNECT TC2-MATRIX OWNERS MANUAL
Contents
1. Obtain DNS server address automatically Use the following DNS server addresses Preferred DNS server Alternate DNS server E Validate settings upon exit TC2 MATRIX manual en v1 doc 5 DEVICE PARAMETERS Right click a device in the device list to modify the settings for that device Modifies Alias and IP address settings JO HDMI over IP Console V230 Re Reads device settings in case they have changed Can be applied to multiple devices at once import H Export r seria Devices Product TX RX 4 Search Delete Restore Alias Type Host Name 9 __m uo lt __ tu 60r91tt1Pg p9q 9 Deletes devices from the device list Select Search to add them to the list again Can be applied to multiple devices at once ww Tx 2 TX TX 023BB434125E Turn On OSD Turn Off OSD Reset Reset END Resta A On Screen Display ON or OFF By default the devices will display 123456 when powered on Can be applied to multiple devices at once Restores factory settings You must restart the devices for this to take effect Can be applied to multiple devices at once Resets Transmitter EDID settings Restarts devices Can be applied to multiple devices at once 10 TC2 MATRIX manual en v1 doc DEVICE SETTINGS Selecting Config in the previous will open this dialogue box Current device Device Settings amp md Generated by system2. Devices RX 2 Cannot be changed Host Name ID 82E18B123704 Alias RX 2 IP Address Settings User defined name max SY T DHCP Static 80 characters IP Addreks 169 i 254 7 46 Subnet Mask E Assigned IP address manually Assigned IP address Device assigned IP automatically address by router or switch NOTE 1 OK applies settings and closes dialogue box NOTE 2 If you change IP address settings you need to restart device after applying changes and search for device again 11 TC2 MATRIX manual en v1 doc 7 SCENE OVERVIEW The Scene window is where you setup the matrix Each box cell represents a receiver fp Coste Modify 36 remove L Delete 7 Restore L i PI Applied automaticaliy Status Updated Type Host Name RX RX 82 188123704 TX Tx 0238B434125E Delete current scene Modify current scene Create new scene Name of current scene Applies settings as you make changes Applies current settings to devices involved 12 TC2 MATRIX manual en v1 doc Status Indicator a E Scene is restored from devices b Scene settings are in progress C E Scene settings are applies successfully d E Scene settings failed to be applied CREATING OR MODIFYING SCENE This dialog box lets you set a name max 80 characters and change the cells for a scene Modify Scene 13 TC2 MATRIX_manual_en_v1 doc 9 Drag and drop SCENE CELLS Each ce
3. x 38mm COMPLIANCES RoHS WEEE CE EMC ACCESSORI ES I NCLUDED Mounting ears TC2 MATRIX manual en vl d 18 OC WARRANTY This product comes with a 2 year return to base warranty effective from the date of purchase This warranty applies only to the original purchaser and is not transferable For the avoidance of doubt this will be taken from the information held by the appointed national distributor at the point of sale If the product is DOA dead on arrival you have 21 days from purchase date to notify the national distributor via your AV reseller The liability of the manufacturer and its appointed service company is limited to the cost of repair and or replacement of the faulty unit under warranty except for death or injury EU85 374 EEC This warranty protects you against the following Failure of any components including the power supply Damage when the product is first removed from its packaging if reported within 24 hours of purchase If you find you do have a problem with this product you should contact the AV reseller you purchased this product from The original purchaser is responsible for shipment of the product to the manufacturer s appointed service centre for repair We will endeavour to return repaired units within 5 working days however this may not always be possible in which case it will be returned as soon as practicably possible In line with our WEEE commitments the manufacturer endeavours to replace
4. RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE All products are designed and imported into the EU by Vision who is wholly owned by Azlan Logistics Ltd Registered in England Nr 04625566 at Lion House 4 Pioneer Business Park Clifton Moor York YO30 4GH WEEE Registration GD0046SY oHs 2002 95 EC DECLARATI ON OF ORI GI N All Vision products are made in the People s Republic of China PRC 2 TC2 MATRIX_manual_en_v1 doc USE ONLY DOMESTI C AC OUTLETS Connecting the unit to an outlet supplying a higher voltage may create a fire hazard HANDLE THE POWER CORD WI TH CARE Do not disconnect the plug from the AC outlet by pulling the cord always pull the plug itself Pulling the cord may damage it If you do not intend to use your unit for any considerable length of time unplug the unit Do not place furniture or other heavy objects on the cord and try to avoid dropping heavy objects on it Do not tie a knot in the power cord Not only could the cord be damaged but a short circuit could also be caused with a consequent fire hazard PLACE OF I NSTALLATI ON Avoid installing this product under the following conditions Moist or humid places Places exposed to direct sunlight or close to heating equipment Extremely cold locations Places subject to excessive vibration or dust Poorly ventilated places Do not expose this product to dripping or splashing DO NOT PLACE OBJECT
5. S FILLED WITH LIQUIDS ON OR NEAR THIS PRODUCT MOVI NG THE UNIT Before moving the unit be sure to pull out the power cord from the AC outlet and disconnect the interconnection cords with other units WARNI NG SI GNS If you detect an abnormal smell or smoke turn this product off immediately and unplug the power cord Contact your reseller or Vision PACKAGI NG Save all packing material It is essential for shipping in the event the unit ever needs repair IF ORIGINAL PACKAGING IS NOT USED TO RETURN THE UNIT TO THE SERVICE CENTRE DAMAGE IN TRANSIT WILL NOT BE COVERED BY WARRANTY OVERVI EW This product converts HDMI signal into native ethernet signal and allows the signal to be routed through a normal local area network 3 TC2 MATRIX manual en v1 doc TRANSMI TTER safal afal 1 12V 2A Power input note device can also receive power via Power Over Ethernet POE 2 CAT5e 6 Output 3 HDMI Input 4 RS 232 phoenix terminal block 5 Earth discharge screw for excess static situations RECEI VER 1 2 3 4 5 1 12V2A Power input note device can also receive power via Power Over Ethernet POE 2 CAT5e 6 Input 3 RS 232 phoenix terminal block 4 HDMI Output 5 Earth discharge screw for excess static situations 4 TC2 MATRIX_manual_en_v1 doc DEVI CE STATUS LI GHTS RED POWER LED Flashing starting up Steady ready BLUE STATUS LED None ethernet not connected Flashing ethernet connected but no handshake w
6. VISION installation innovation TECHCONNECT TC2 MATRI X OWNERS MANUAL VISION TC2 MATRIXRx www visionaudiovisual com techconnect tc2 matrix 1 TC2 MATRIX_manual_en_v1 doc DECLARATI ON OF CONFORMI TY Where applicable Vision products are certified and comply with all known local regulations to a CB Certification standard Vision commits to ensure all products are fully compliant with all applicable certification standards for sale in the EU and other participating countries The product described in this owner manual is in compliance with RoHS EU directive 2002 95 EC and WEEE EU directive 2002 96 EC standards This product should be returned to the place of purchase at the end of its useful life for recycling WARNI NGS RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING TO REDUCE THE
7. ith other Tx or Rx Steady connected and working 5 TC2 MATRIX_manual_en_v1 doc INSTALLATI ON 1 CONNECT HARDWARE TO NETWORK Connect all transmitters and receivers to a network 2 DOWNLOAD SETUP SOFTWARE Download configuration software from www visionaudiovisual com techconnect tc2 matrix 3 RUN SOFTWARE Un compress and double click HDMI overl P exe file This application does not need to be installed NOTE The OS must be Windows XP or newer It does not work for Mac 4 SEARCH FOR DEVICES Click Search in the Devices area NOTE If amending programmed devices check Restore before searching so previous configuration can be automatically restored If you forget to do this delete the devices from the list and Search again with Restore checked HDMI over IP Console V2 3 0 5 J Import Export ir Serial Devices 3 delete E Restore Alias Type Host Name The first time you press search the Windows Security Alert may be displayed Select both check boxes in the dialog box and click Allow access 6 TC2 MATRIX_manual_en_v1 doc G Windows Firewall has blocked some features of this program Windows Firewall has blocked some features of Configuration tool for HDMI over IP on all public and private networks 9 Name Configuration tool for HDMI over IP Publisher Path C users dqa desktop hdmioverip_v1 1 0 S hdmiowerip exe Allow Configuration tool for HDMI over IP to communicate on the
8. ll corresponds to a receiver e g ten receivers you need ten cells To allocate devices to each cell right click Video Wall Properties Turn OSD On Turn OSD Off Remote Control Serial Or drag from the device list Dm Elect Gm Psew Binomio Bio Pre Dewes Scene nic i enni Gini dia ia Eo vaa TT devices onto the Scene to add them BE 14 TC2 MATRIX manual en vl doc 10 USING FOR VIDEO WALLS In the above menu select Select All then Combine to use for videos walls This dialogue box will open UNIT 0 1mm a Name the video wall b Adjust the bezel and gap compensation c Select OK These settings and advanced settings can be accessed later by selecting Video Wall Properties Change TX Change RX Remove TX Remove RX Select All Combine Split Turn OSD On Turn OSD Off Remote Control Serial Split cancels the video wall 15 TC2 MATRIX_manual_en_v1 doc 11 12 CONFIGURATION FILES When you quit the software it saves an updated configuration file default hoi to the computer Click Export in the software to save the configuration file for use on a different computer I mport allows you to use this configuration file on a different computer 4 HDMI over IP Console V2 3 0 import export n serial ED information Bloo Hap Devices Scene INFORMATION AND LOG WINDOWS The Information and Log window
9. s show additional information for trouble shooting HDMI over IP Console V2 3 0 Shows device name and IP information Shows sent and received messages log TC2 MATRIX manual en v1 d 16 OC 13 SERIAL You can send an adhoc RS 232 control command to a connected source or display device For example you can use it to turn an inaccessible flat panel off Devices Filter by Scene 0303 Via TX RX E RX 2 F TX 2 NOTE IR is not supported by the Techconnect Matrix 17 TC2 MATRIX_manual_en_v1 doc SPECI FI CATI ONS PRODUCT DIMENSIONS 141 x 115 x 26 mm length x width x height PRODUCT WEIGHT 440g CONSTRUCTION MATERIAL Metal COLOUR White TECHNICAL DETAILS Input Video Signal 0 5 1 0 volts p p Input DDC Signal 5 volts p p TTL Maximum Video Format Supported 1920x1200 1080P Output Video HDMI 1 3 with HDCP Output Audio Stereo only Operating Temperature Range 5 to 35 C Operating Humidity Range 5 to 90 RH no condensation Power Consumption 5 watts Maximum distance if connected peer to peer directly 100m CONNECTIVITY 1 x HDMI type A 1 x RS 232 3 port phoenix 1 x Ethernet RJ 45 1 x DC Power 2 port phoenix 1 x Ground for cases of excess static discharge 2 x POWER SUPPLY 100 240v 50 60Hz AC 12 volt 2 amp Transformer integrated into plug Includes interchangeable plugs UK EU US AU DC tail length 1 8m Transformer dimensions 81 x 52
10. se networks Private networks such as my home or work network V Public networks such as those in airports and coffee shops not recommended because these networks often have little or no security What are the risks of allowing a program through a firewall SUCCESS When complete authenticated devices are displayed in the device list import export GIR Serial E informatic ou a T esre Alias Type Host Name W RX2 RX 82E18B1237D4 D TX 2 TX TX 023BB434125E FAILURE Devices are assigned IP addresses in Auto IP mode by default Their IP address is 169 254 x x and subnet mask is 255 255 0 0 If no devices are found ensure the computer is on the same network address and subnet mask To change the IP address a Control Panel gt Network and Internet gt Network and Sharing Centre gt Change Adaptor Settings TC2 MATRIX_manual_en_v1 doc You can also right click on the internet icon in the bottom right task bar to go to the Network and Sharing Centre gt Control Panel Network and Internet Network and Sharing Center v Search Control Panel p Control Panel Home View your basic network information and set up connections Manage wireless networks LV o o W See full map Change adapter settings Change advanced sharing seiiings View your active networks Connect or disconnect wifi Access type Internet ia nae Connections ill ee ji Connection Change your networking
11. settings Set up a new connection or network Set up a wireless broadband dial up ad hoc or VPN connection or set up a router or access point Connect to a network Connect or reconnect to a wireless wired dial up or VPN network connection Choose homegroup and sharing options Access files and printers located on other network computers or change sharing settings Troubleshoot problems Diagnose and repair network problems or get troubleshooting information See also HomeGroup Internet Options Windows Firewall b In the new window right click on active connection and select Properties c Click on Internet Protocol Version TCP I Pv4 and select Properties Wireless Network Connection Properties P Intel R Centrino R Advanced N 6200 AGN This connection uses the following items 0 Client for Microsoft Networks M JE Q0S Packet Scheduler S Fie and n e Transmission Control Protocol Intemet Protocol The default wide area network protocol that provides communication across diverse interconnected networks TC2 MATRIX_manual_en_v1 doc d Enter correct IP and subnet details as below and select OK Internet Protocol Version 4 TCP IPv4 Properties You can get IP settings assigned automatically if your network supports this capability Otherwise you need to ask your network administrator for the appropriate IP settings Obtain an IP address automatically Default gateway
12. the faulty parts of the product rather than replacing the whole unit This warranty does not protect this product against faults caused by abuse misuse incorrect installation unstable or faulty power input which might be caused by ignoring the guidelines set out in this manual LEGAL DISCLAIMER Because we are committed to improving our products the details above may change without prior warning This User Manual is published without warranty and any improvements or changes to the User Manual necessitated by typographical errors inaccuracies of current information or improvements to programs and or equipment may be made at any time and without notice Such changes will be incorporated into new editions of the User Manual 19 TC2 MATRIX_manual_en_v1 doc
Download Pdf Manuals
Related Search