COBAN GROUP CO.,LTD
Contents
1. canceled The tracker will immediately restore the factory settings All previous settings will be A 5 5 14 GPRS setting User must send SMS via cell phone to set up IP port and APN before starting GPRS 5 14 1 Setting up APN 5 14 1 1 APN standards for Access Point Name and differs from country to country For more information about the local APN inquire with your local GPRS network operator 5 14 1 2 Text the tracker a SMS apn password Space your local APN via a cell phone and if succeeded in setup the tracker will return the message apn ok 5 14 1 3 e g send SMS command apn123456 cmnet If succeeded apn ok is returned by the tracker in SMS Notes 123456 refer to password of tracker and CMNET is the APN of China Mobile One of GSM Operator in china Note when the device has no GPS signal or on sleeping mode it reply 2 SMS the rst of history record V V the second of real time tracking information after get GPS signal V A Make sure that all the symbol in sms commends is just for quick understanding which don t need to enter in sms and space means press the space bar button of the cell phone When the device location show different with map there are two kinds of circumstances 1 Device in sleep condition 2 No GPS signal Solution Dial SIM Card Number in the Device if only reply one SMS with V V it means no GPS Signal If reply one SMS with V A it me2. coordinate of the bottom right corner 5 7 2 Cancel Send SMS nostockade password to deactivate this function tracker will reply nostockade ok stockade ok stockade alarm http maps google com m aps a 22 60096 2c114 11721 valid A time 2012 12 21 02 34 53 spd 000km h bat 5 1D 4008 000102 2706 4 5 8 Movement alert 5 8 1 Set up When the unit stays immobile in a place for 3 10 minutes the user can send SMS move password to the unit then the unit will reply move ok In case of such a movement the unit default distance is 200M it will send SMS Move ALARM Latitude and longitude to the authorized numbers every 3 minutes 5 8 2 Cancel Send SMS nomove password to deactivate the movement alert reply nomove ok move128456 move ok 5 9 Overspeed alert 5 9 1 Set up Send SMS speed password space 080 to the unit suppose the speed is 80km h and it will reply speed ok When the target moves exceeding 80 km h the unit will send SMS speed ALARM 080 Latitude and longitude to the authorized numbers every 3 minutes 5 9 2 Cancel Send SMS nospeed password to deactivate the overspeed alarm tracker will reply nospeed ok Remark The recommended speed should be not less than 50km h For below that rate it will be effected the accuracy by gps signals drift etc speed alarm speed ok oj aps q 22 5673
3. 1 Set Password Send sms password old password space new password to the unit to change the password For Example pls send sms password123456 888888 to terminal device it will reply sms password OK New password 888888 changed in success 5 2 2 Be sure keep the new password in mind you have to upload the software to restore the original setting in case of losing the new password 5 2 3 Make sure the new password is in 6 digits Arabic numbers or the tracker can not recognize the password 5 2 4 Make sure that all the symbol in sms commends is just for quick understanding which don t need to enter in sms and space means press the spacebar button of the cell phone password ok 5 3 Authorization There are only 3 cell phone numbers able to be authorized be sure to set the authorization phone number before use 5 3 1 Send SMS admin password space cell phone number to set up a authorized number The other authorized numbers should be set by the first authorized number If the number is successfully authorized the unit will reply admin ok in SMS 5 3 2 Send SMS noadmin password spacetauthorized number to delete the authorized number 5 3 3 For roaming purpose you have to add your country code ahead of the cell phone number for example please send admin123456 008613322221111 to tracker to set 13322221111 as an authorized number admin ok 5 3 5 W
4. 3 2c114 171 3 06 41 43 S 007km h Bat 80 410 5 _ J 9112546 Google Maps link This is the link to the Google map showing the position of the tracker unit When click the link if a map is displayed there is GPS information for the unit If there is no may there is no GPS information for the tracker V AIV Indicates GPS signal V A indicates there is a GPS signal V V indicates there is no GPS signal 2014 07 29 06 41 43 The date and time stamp when the unit last received a GPS signal S 007km h This indicates the last known speed of the unit Bat 80 The approximate amount of battery charge remaining The value is between5 and 100 with 100 being fully charged 4109112546 The IMEI code of tracker device This number is used for tracking website and the app 3 SMS TRACKING 1 Call the SIM card phone number in the device by other cell phone 2 Receive a Google Maps link by SMS to your mobile phone 3 Click on the Google Maps link 4 Now it displays the position of device Command Instruction INSTRUCTION COMMAND REPLY Reboot the device begin123456 Set authorized number admin123456 space phone admin ok number Cancel authorized number noadmin123456 space phone number SMS Track G123456 Google link set GMT time zone number timezone123456 space 8 Sleep by time default mode save sleep123456 space time sleep time ok much power tracker will fall asleep in 5 minutes Sleep by shock sensor Su
5. 6 2c113 85610 valid A time 2012 12 19 05 08 12 spd 042km h bat 5 1D 4008 001447 1411 i 5 10 Low battery alert When GPS device battery is going to be about 3 7V it will send SMS bat at 30 minutes interval bat http maps google com m aps am 0 valid A time 2012 12 21 06 39 44 spd 000km h bat 3 1D 4008 000102 2905 7 mms 5 11 Terminal local Time Setting Send SMS time space zone password space local time For example Send SMS time zone123456 8 time zone of China If the local time zone is negative as 8 then it should set as SMS time zone123456 8 time ok 5 12 Sleeping power save mode Sleep by time ex factory default mode save much power Send sleep password space time tracker will reply sleep time ok if none of the alarms has been set and no operations tracker will fall asleep in 5 minutes LED will be off calling or SMS or Pressing switch can awake the tracker If these alarms have been set tracker will enter sleep by detecting shock sensor And tracker will sleep by time as default Sleep by shock sensor recommend set this mode when driving Send sleep password spacetshock tracker will reply sleep shock ok it will enter sleep mode after detect no shock and LED will be off 5 13 Restore factory settings send SMS command format the unit will reply Restore factory Settings ok please bind the owner again
6. PET GPS TRACKER COLLAR KDL100 USER MANUAL PREFACE Thank you for purchasing the GPS tracker This manual shows how to operate the device smoothly and correctly Make sure to read this manual carefully before using this product Please note that specification and information are subject to changes without prior notice in this manual Any change will be integrated in the latest release The manufacturer assumes not to be responsible for any errors or omissions in this document 1 Introduction KDL100 is a leather pet collar suitable for midium and large animals a special design hidden design tracker It can locate accurately set multiple functions of security positioning realtime tracking Offer you precise positioning information and dynamic conditions Perfect deluxel eather collar design with GPS tracker inside of small pouch make it not visible against thief also weather proof It working based on existing GSM GPRS 850 900 1800 1900MHz network and GPS satellites locate and monitor the pets by SMS or Computer or PDA which can be utilized by you to position your pet it s a cool tool to protect your PET and farm animals Special Features High quality leather pet collar design Hidden tracker not easy to notice Waterproof GPS SIRF Star Ill chipset Fast Signal Acquisition Adjustable length suitable for different size animals Track by SMS with the maps link Realtime tracking 1000mAh battery lo
7. ans device in sleep model Note We advice use Shock Sleep Model when driving 10
8. hen the authorized number call the device it will hang up your phone and reply a real time latitude and longitude information as below http maps google com m aps 2c114 valid A time 2013 02 22 07 07 52 spd 000km h bat 6 1D 4008 000157 2504 plmn 46001 lac 9516 cellid 5935 5 4 Single Locating 5 4 1 If there is no authorized number when any number dials up the unit it will report a Geo info If there is already an authorized number then it will not respond when an unauthorized number calls it up 5 4 2Single message inquires the latitude and longitude information any telephone number can send instr uction G1234 to the equipment then the equipment will reply the latitude and longitude information to thi s telephone Note G is for directive 1234 is the first four numbers of the password 5 4 3 When an authorized number dials up the unit it will hang up and report a real time Geo info as below Tracking location When GPS signals is weak the position of latitude and longitude included in the SMS is the position that the tracker received GPS signals at last If it is different with its exact current location pay attention to check the time included in the SMS you got aps E22 2c113 4 valid A time 2012 12 19 04 10 54 lt spd 001km h bat 5 1D 4008 001447 2007 plmn 46001 5 5 Auto Track 5 5 1 Send SMS command t030s005n password to the tracker device it will report the no reply at 30s inter
9. its for sleep123456 space shock Sleep shock ok No sleep tracker will continuou sleep123456 spacetoff sleep off ok Switch to the NO GPRS mode default Nogprs123456 Nogprs ok Switch to the GPRS mode for tracking gprs123456 gprs ok EN i Format the device must send by format ftom a a S 4 ONLINE TRACKING 4 1 COMMAND INSTRUCTION TO SET THE ACCES POINT NAME APN NAME INSTRUCTION COMMAND REPLY FOR EXAMPLE Set new APN apn 123456 space apn A old one will be apn ok apn123456 apn content replaced apnuser 123456 space co APN user Set APN username a apnuser ok japnuser123456 user nten apnpasswd 123456 space apnpasswd 123456 APN password Set APN password apnpasswd ok content password PN Switch to thelOpen the GPRS gprs123456 gprs ok gprs123456 GPRS mode Set Upload Default 120 seconds Upload 123456 space 30 Upload ok Upaload123456 30 the frequency 4 2 START ONLINE TRACKING Note Must turn on GPRS function Send comand gprs1234056 to the device and set the apn first Platform http www zg888gps com IMEI No In the pack cover inner side Password 123456 5 DETAIL INSTRUCTION 5 1 Initialization Send begin password in SMS to the unit it will reply begin ok and initialize all the settings Default password 123456 For example send SMS begin123456 to the tracker via a cell phone If succeeded if will reply begin ok J begin Ok 5 2 Change the password 5 2
10. ng time usage Free online web server Specification Dim 68cm L x 3 8cm W leather Thickness 4mm im Shortest circle 40cm Cold status 45s Time To First Fix Warm status 35s Hot status 1s 12 24V input Car charger 5V output 110 220V input Wall charger 5V output Battery Chargeable changeable 3 7V 1000mAh Li ion battery Stand by 300hours Storage Temp 40 C to 85 C Operation Temp 20 C to 55 C Humidity 5 95 non condensing LED INDICATOR STATUS MEANING 2 INSTALLATION 2 1 SIM CARD INSTALLATION Open the leather collar cover on the side of collar pack the PCBA will be exploded insert the sim card into sim card slot if you have purchased a MICRO SIM you will need to use the Micro SIM adapter enclosed like this 2 2 USE THE GPS DEVICE Turn on the unit outdoors by pressing the on off button until the indicator is on For first use please initialize the unit and restore it to default setting Please refer to 3 1 for instruction In 10 or 40 seconds the unit will begin to work and acquire the GSM signals as well as the GPS signals The indicator will keep flashing every 3 seconds when the unit has received the signals When this unit receives GPS signals normally you can use it and do any setting as the instructions of this manual 2 3 EXPLANATION OF PARAMETERS CODES IN SMS MESSAGE 2 4 6 SP 66 V A 2014 07 29 http maps qgoogle com maps a 22 6393
11. vals for 5 times s second m minute h hour This command setting must be in 3 digits and the maximum value is 255 5 5 2 Unlimited times auto track Send SMS t030s n password to the tracker device it will reply the no reply continuously at 30 seconds intervals 5 5 3 Cancellation Send SMS not password to the tracker device it will report the notn ok Note the interval must not less than 20s 5 6 Monitor Voice Surveillance 5 6 1 The command to switch between Track and Monitor are tracker and monitor 5 6 2 The default mode is track Track mode 5 6 3 Send SMS monitor password and it will reply monitor ok and switch to monitor mode 5 6 4 Send SMS trackert password it will reply tracker ok and restore to track mode monitor ok Fm 5 7 Geo fence Set up a geo fence for the unit to restrict its movements within a district The unit will send the message to the authorized numbers when it breaches the district 5 7 1 Set up When the unit stays immobile in a place for 3 10 minutes the user can Send SMS stockade password spacetlatitude longitude latitude longitude to unit to set the restricted district In case of breach it will send SMS stockade ok to the authorized numbers every 3 minutes Remark The first latitude amp longitude is coordinate of the top left corner of the Geo fence while the second latitude amp longitude is the
Download Pdf Manuals
Related Search