Divansi® MOB
Contents
1. 16 TABLE OF DIFFERENT MODES 20 3 Navigation o soie l 22 4 Self Test Mode Synchro 23 24 5 Alarm 25 Alerts management Untimely 26 Management Several 1015 26 Delal 26 BEACON Pv 21 M 2 NEC TT 21 2 Synch Self Test Mode 21 3 JA de 29 n Tuna pu HHHH HHH HHH HH HH Im 29 n 29 CONDITIONS OF SERVICE AND STORAGE 30 1 Maintenance requirements 3l 32 User Manual Divansi 1 CONDITIONS OF REPAIR AND MAINTENANCE 23 1 The repair conditions kk 34 2 Warranty repairs 34 3 Non warranty repairs 35 GENERAL INDICATION ntn 36 1 Waste Management 37 J rini cad 37 3 Responsibi2. SPEGIFIGATIONS onsole aboard monochrome SV82N 10 C 55 Storage temperature 30 70 xn 500 MA Average consumption with Antenna 120 0 12 Volts Display 128 64 dots pixels with backlight diam 172mm hauteur 145mm 400g 100 Knots Operating temperature 20 C 65 C Storage temperature 50 C 70 10V 30V 500 fuse protection ISM 869 4Mhz to 869 65 Mhz ES SUA u P68 10 meters for 10 minutes Operating temperature 20 65 Storage temperature 50 70 Batterie Lithium non rechargeable replacement by a service partner every 3 years Autonomy after activation 12 hours in a minimum environ ISM 869 4Mhz to 869 65 Mhz 18181113 User Manual Divansi MOB 47 safe distance Console Antenna Standard compass 0 30m 0 70m Steering compass 0 20m 0 50m Approval Certificate Number 26503 A0 MMF Immunity EN 55022 Classe B Susceptibility EN 50082 1 Certification DAHMAS issued by BUREAU VERITAS Beacon 0 70m 0 50m Are applicable to all components and devices specific trigger DAHMAS i R amp TTE Directive 1999 5 EC 2002 92 EC EN301489 3 version 1 4 1 version 2 1 1 EN300 220 2 Rec 70 03 11
3. Perform a final self test control User Manual Divansi in the jacket ship Before installation synchronize with the beacon of the console board Start the Self Test by three supports the test button see Chapter Self Test and then synchronize with the console The tag is attached by its belt clip on the strap of the vest For that loosely the two top screws of the clip 50 Drag the beacon on the strap of the vest where indicated the red pin positioned outwardly of the bladder Insert the third screw and tighten everything Please do not remove the red pin to avoid triggering a false alarm Position of the beacon on the inflated life jacket User Manual Divansi
4. on goods sold by persons not authorized by SEAREKA Responsibility SEAREKA is always limited to replacement of defective pro ducts Seareka responsibility is clear in the case of improper use 2 Warranty repairs All repairs regardless of use conditions necessitated by an event due to a demand of SEAREKA or one of its subcontractors or suppliers or any of its authorized distributors are totally supported by SEAREKA or one of its autho rized distributors which will if necessary replace the system s expense The conditions for carrying out these repairs are at the discretion of the company SEAREKA User Manual Divansi MOB 35 Terms of repairs and maintenance 3 Non Warranty repairs All repairs necessitated by an event or a fact not attributable to SEAREKA to society or one of its authorized distributors are charged to the user examples fall faulty installation misuse power surge lack of maintenance storage conditions third party intervention wear It contacts the technical service of SEAREKA at mail address technical ser vice Q seareka com or one of its distributors approved Seareka provided a preliminary cost estimate taking into account the different travel and any ac commodation an estimate of response time and the technician hourly rate in effect It is specified any part to be changed will also be charged to the user at the current rate Depending on the failure and of the location of the user i
5. 1 numero 2 version 3 batt radia OK 4 synchro DEFAUT 1 ID tag 2 Firmware Version Tag 3 Beacon State 4 Synchronization with the boat taking the self test 5 Access extended mode If the beacon is not synchronized to the boat the sync is in default for synchronize the beacon then you must press the red button of the console The field then changes to sync OK as shown below Please note the auto test in the ma nual on the last page User Manual Divansi MOB 25 OPERATION CONSOLE 5 Alert mode This mode can be triggered in three ways Activation of a beacon Long press button MOB Console Pressing punch button 1 4 7 2 11 Li min 3 102112 ij lt Pos ES 43 06 47 20925 1 9 5 54 03 E 1 1 Total duration alert since the start of it The indication STOP can occur following voluntary cessation of Beacon 7 is not end of warning Follow the procedures for alerting end with the relevant authorities 2 1 1 is the number of warning alert 3 3 User Information Alert ID xxx With the emergence of a Beacon MOB After pressing the Red Button id MOB EXT Suite in support of Punch Button 4 4 Reception level of the received 5 5 State of the received GPS coordinates Estim Coordinate fall GPS beacon not stalled Fix Coordinate Beacon GPS Beacon stalled Time appears counti
6. on the console This is not end of alarm Follow the procedures of warning end with the competent authorities 30 User Manual Divansi CONDITIONS OF MAINTENANCE AND STORAGE User Manual Divansi 3l Conditions of maintenance and storage 1 Terms of service The user must follow the maintenance requirements of each element of sys tem and in particular after each use in particular for the part of system located on the man overboard and therefore in contact with water These maintenance requirements are specific to each system component The periodicity of this interview and when to intervene must be meticulously observed by the user regular checking of the level of battery charge The user must perform a self test at least twice a year to ensure the proper functioning of the system and the tag and see the POST well done on the last page dashboard provided for this purpose The lifetime of the tag depends on its use 1 If the beacon has been used not even one and only time it must be unser viceable and returned to its manufacturer or distributor Use only 2 f the beacon has never been used its life is 3 years standby with two self tests per year from the date written on the box After each use the user must rinse with fresh water at low pressure throughout the material 1 on the console edge Please ensure that the two connectors rear are either blocked by their caps or connected to thei
7. or existing wi thin the profession or activity in question either because of legal or regulatory requirements The user agrees not to make a different use of any kind whatsoever and must ensure that its employees comply with this obligation In this case the operator shall be sole responsibility User Manual Divansi Important caveats The user must read the following conditions before implementing the system or one of its tags It is therefore important to read carefully and thoroughly this manual before implementation The mounting system Refer to the manual The installation of the system must be performed by a certified technician You will find the list with Seareka The system will be functional if the installation is performed as described in this manual During the first start up a test of all the system component is required The beacon is considered automatic when installed on a inflatable life vest specifically fitted by a qualified technician Otherwise it is manually triggered Any radio interference in the same frequency band around the antenna can reduce system efficiency The indicator of ambient noise in navigation mode indicates information in real time on the level of radio noise in the area This is the case if this value is less than 70 dBm consistently p 22 index3 User Manual Divansi user must take into account presence board of other electronic systems a
8. the menu Wait 10 seconds automatic output 16 User Manual Divansi OPERATION CONSOLE BRIGHTHESS Press the red button or the black button to adjust the brightness Press the red button or the black button to adjust the contrast Wait 10 seconds to return to menu It is a sound indication pointing out the ARRIVAL AL ARM nearness of the beacon MOB at shown dis tance 100 Press the or the black button to adjust the approach alarme Wait 10 seconds to return to menu GPS COORDINATES Press the black buton next for second 00 00 00 choose et press the red bouton select for validate and go back 90 0961 to the menu thousandth User Manual Divansi MOB 17 OPERATION CONSOLE DISTAHCE UHITS NAUTICAL Press the black button for choose the unit meter or Nautical Miles METER Press the red button to validate v Select Hext and exit Wait 10 seconds to return to menu When stopped the direction of the ship in com parison with MOB is pointed out by a magnetic compass The adjustment of this one is made as stated below Press the red button or the black button to remove or add a degre Wait 10 seconds to return to menu TIME DELAY RELAY cf 1 p 14 Press the red button 02 ser or the black button to E choose the delay before activating the relay Wait 10
9. ERATION CONSOLE 4 Self Test Mode Sync The self test mode allows to verify the proper operation of the system Divan si as a whole console antenna and beacon and manage false alarms by associating the beacon with an antenna Precaution to perform self test The self test of the beacon must be performed outdoors and in open field by the person duly authorized see page 46 Before the self test beacon must not have been stored at a temperature less than 15 degrees The self test must be done with the console that is on board ship which is assigned the beacon This is the only condition that manage false alarm The console must be strictly in self test mode before testing the beacons On the Console the nuisance alerts Activate this mode by three short presses the black button next Console waits in the Auto test mode HUTOTEST On the Beacon Activate this mode by pressing the 3 button black test of the Beacon each support is confirmed by an LED Self Test Mode runs 24 User Manual Divansi 9 MOB OPERATION CONSOLE Result of the Auto test The result of the self test tested the tag appears This validates the receipt ra dio and gives the result of tests If no result appears repeat the self test If the problem persists contact the Technical service The self test must be carried out one by one The result of a new self test replaces the old On the console
10. IEC 60945 test environments 111 61162 digital interface 48 User Manual Divansi MOUNTING THE Divansi MOB Mounting the beacon in the jacket must be made by the person Open the life vest side of the tether see data sheet of the referent duly formed for this purpose vest Identify the strap with its positioning mark beacon center and the attachment loop to trigger the red pin Dude This can be sewn either on the top or bottom of the envelope The Vest approved Divansi MOB is identifiable by the logo visible on the envelope outside Crossing the red pin in the attachment loop of the Fold the antenna and then return the pin in vest position on the tag on the same side as its Start the beacon auto test by three presses the test 8ttachment loop Make sure the pin is locked by button see chapter self test Wait a brief brilliance of eye of the antenna Attention to the insertion the flash lamp and remove the pin careful deploy of the pin it must have its mark V visible on top ment of the antenna A two tone sounded accelerating to 1min 30 The goes out at the end of its cycle after which the alarm goes off auto test Place the pin in the attachment loop node by performing a suitable knot Before placing the tag in the shell of the vest and close it check that the pin is on the same side as the direction of pull Stretch the strap
11. USER MANUAL Version 04 02 12 DAHMAS certificat number 26503 A0 MMF e Sea U si 9 seqreko Seareka Sas Capital 37 000 Euro SIRET 50080745800012 RCS Lyon Headquarters Building HERMES Locality of Garon D386 D117 145 Route de Millery 69700 MONTAGNY FRANCE Authorized Distributor User Manual Divansi Destination product He was recalled to the user the system is intended to be a professional au dience in the field of water activities or to an audience of amateurs who have received the necessary training corresponding to water activities they intend to operate Each user must in all cases to behave in line with those activities This system is not intended to replace the safety instructions local regu lations and usual that it is essential to respect This system aims to improve the localization of those fallen in the sea The transmission of information with this system allows the location with varying degrees of accuracy and speed of those concerned and this also depending on the number of ships equipped and compatible present in the zone This system is not a safety system or warning and does not aim to prevent incidents and accidents of any nature whatsoever This system does not replace other systems or locating means security or transmission of information normally used by application of the rules of use within the profession or activity concerned recommendations
12. above warranty fixed All malfunctions due to an element or an external response SEAREKA or not attributable to one of his servants or any of its distributors approved are not the responsibility of the latter It is also stated to the user due to the true destination of system described above in case of questioning the responsibility of SEAREKA in all cases it will be incurred only up to the cost of the product 40 User Manual Divansi COORDINATES SEAREKA User Manual Divansi 41 Coordinates Seareka As stated in the user throughout this manual services SEAREKA society or one of its authorized distributors can be contacted at any time the coordinates are as follows Seareka Sas Capital 37 000 Euros SIRET 50080745800012 RCS Lyon Headquarters Immeuble HERMES Locality of Garon D386 D117 145 Route de Millery 69700 MONTAGNY For all other information concerning the conditions for marketing or lease of the system or on rates payment terms delivery terms and the user should refer to the purchase order or contract with the company SEAREKA or one of its authorized distributors Authorized Distributor 42 User Manual Divansi 9 MOB 43 211584 ou User Manual Divansi E User Manual Divansi 45 User Manual Divansi QUIEN NE User Manual Divansi
13. al structures minimum 1m from another antenna Visibility of 225 with no blind spot centered on the back of vessel a total angle of visibility on the horizon of at least 3550 Connect the antenna to the console t is necessary after installation to calibrate the magnetic compass see Console settings Safe distance compasses CF45 User Manual Divansi 9 MOB 7 INSTALLATION Console Edge Divansi MOB SV82N Console warning and gave the crew the direction to take in to MOB upon vation of a beacon 1 Console Waterproof it can be found both indoors and outdoors IP68 2 Red button It can trigger an alert MOB long 3s 3 Pushbutton black Multifunctional it can access the menu perform a self test Acknowledge an alarm 4 Buzzer Sound alert 5 Monochrome screen It displays navigation information and location of the beacon It is readable both day and night thanks to its backlight 8 User Manual Divansi 9 MOB INSTALLATION 1 A connector called ANT Waterproof IP68 with plug to connect the antenna cable Dome Divansi MOB 2 A connector called BATT Waterproof IP68 with plug connect the power cable with one output for the switch Punch to an external device such as the audible alarm and light and a serial port Installation Close to the cockpit of the ship the console should be front of the navigator The top of the screen represents the bow For shi
14. ase of battery failure restarts the process several times battery de passivation If the fault persists change the battery User Manual Divansi 9 MOB 29 OPERATION BEACON 3 Alarm Mode Activation of an alarm The outbreak of the MOB beacon can be Manual or by pulling on the red pin alarm Is automatic at the opening of theinflatable live jacket the alarm pin is removed from its location freeing the antenna The beacon is then set Alarm mode When the tag is in alarm mode the flash lamp is lit and a beep sounded indicating the onset for 3 minutes When the tag is not integrated in a pfd it must be triggered manually While floating it is preferable to a better focused radio maintaining the highest possible Do not put any obstacle in front of the logo DIVANSI and the radio antenna be reused without advice from a certified technician It is ESSEN Caution Once the MOB beacon was used triggered it cannot TIAL that you change the beacon MOB Stopping an alarm How to stop Beacon The judgment of the MOB beacon is a two manipulations This to avoid stop ping a tag by mistake First lower the antenna and then put the pin in red alarm its original location by blocking the radio antenna the V of the pin facing you Then press and release the black button TEST STOP Both manipulations stop issuing the alert and call the radio MOB beacon standby It also issues a message STOP will appear
15. ded in accordance with the general conditions of sale SEAREKA the hardware warranty does not apply to defects resulting of poor maintenance improper use improper repairs to changes or adjustments on goods sold by persons not authorized by SEAREKA User Manual Divansi 33 TERMS OF REPAIRS AND MAINTENANCE User Manual Divansi Terms of repairs and maintenance 1 Conditions repairs The products delivered by SEAREKA one of its distributors have a gua rantee for a period of one year from the signing of the trial acceptance report It stops automatically if Customer has not complied its contractual obligation re garding payment without the need a prior notice It is the same if the Customer has not complied conditions of repair maintenance storage and maintenance contained in this instruction manual and any other conditions necessary the proper functioning of the product SEAREKA or one of its authorized distributors guarantees of latent defects the thing sold in terms of Article 1641 of the French Civil Code subject to be noti fied by the customer by registered letter with acknowledgment of receipt within 10 days of discovering the defect barely foreclosure and allow SEAREKA or one of its authorized distributors make the requisite findings to address them This warranty does not apply to defects in goods delivered whose cause due to mishandling improper use improper repairs modifications or adjustments
16. lity 5 38 4 Fault and liability limits 39 SEAREKA CONTACT 1 eee 40 TECHNICAL SPECIFICATIONS 44 MOUNT BEACON Divansi 46 2 User Manual Divansi MOB WHAT IS THE DIVANSI MOB SYSTEM User Manual Divansi MOB 3 System Divansi is communication network for The alert and location of man overboard MOB Positioning of surface objects TRACK Divansi MOB is intended for the detection and localization of a Man in The Sea Man OverBoard MOB Functional innovation Divansi MOB the model Man Overboard Man OverBoard 1 Beacon automatically triggered when it is integrated into 2 Tracking and positioning GPS 4km up to an antenna at a minimum height of 4m 3 Intuitive search interface with support guide on screen distance time etc And arrow indicating the direction of the man overboard 4 Simultaneous monitoring of 30 Beacon Operating principle network transmission 1 1 CPS sirina 1 s 4 a C radio transmission y a E adi 1 4 User Manual Divansi MOB Composition of your kit Divans MOB Pictures are contractual the models p
17. nd their possible incompatibility due to transmission Some people may have a medical conflict with the Seareka system inclu ding those fitted with a pacemaker or cardiac implant Potential interactions may occur with pacemakers however they are transient and clinically insigni ficant and have no consequences on the functioning of pacemakers in gene ral However it is strongly recommended that persons in these situations to consult a doctor before use THE BEACON AUTOTEST MUST BE DONE EVERY 6 MONTHS CHECK THEM GOOD OPERATION Fill booklet p43 User Manual Divansi TABLE OF CONTENTS WHAT IS THE SYSTEM DIVANSI 3 Principle of operation eor a Reo EE eo REFER a ed rk ioc ke V WERA 4 Composition of your kit Divansi 5 INSTALLATION 6 Dome antenna Divansi MOBAAV17 7 Edge console Divansi SV80N 9 OHHO IO unu ass 11 tag Divansi BV12 12 4 4 4 2 1 14 CONSOLE u u BB rev 15 uu uuu nsn aa HH HH HH Hb J J M 15
18. ndby mode is the mode in which beacon is pending a trip In this mode LEDs the Flash and the buzzer are inactive The beacon has a lifetime 3 year Standby with 2 self tests per year and can radiate for 12 hours warning at a temperature of 20 2 Self test synch mode The self test must be conducted every six months by order of the Captain or any person duly authorized It must be done in the presence of Console Di vansi edge of the vessel attachment The test mode to verify the proper functioning of the system using LEDs buzzer and flash on the beacons and the receipt of the message by a display on the screen of the console The synchronization of the beacons is au tomatically with a voluntary action on the console After performing the self test the MOB beacons returns to standby mode automatically To launch the self test press 3 times on the button 28 User Manual Divansi 9 MOB OPERATION BEACON When the beacon is in self test mode it performs an overall control system This is done in three steps 15 step Testing the LEDs and the flash 274 step If the beacon is operational it passes directly to step 3 Otherwise one or several LEDS light steadily for 3 seconds accompanied by a two tone beep See Code Below 3 step The green LED flashes if the tag is synchronized to the boat Otherwise the red LED flashes Radio fault GPS fault Memorie fault Batterie fault In c
19. nding the result display button Display the test Beacon on self test Beacon number beacon launch State radio GPS memory battery synchro 3 short presses on black Reverts to navigation mode button Continuous beep Navigation Display Beacon number GPS location Distance and bearing to follow Warning beacon Briefly press black button Acquittal alert Stop buzzer Short beep upon receipt of a beacon message Briefly press black button Display other MOB if multiple alerts On radio reception end STOP warning beacon Stop d Warning Long press on black but Expires Beacon ton bsec Return to navigation mode or on ano ther page alerts 22 User Manual Divansi 9 MOB OPERATION CONSOLE 3 Navigation Mode The Navigation Mode appears by default after the home screen and or setting of the system is operational A cross on the navigation screen indicates that the commissioning of the installation was not performed by a certified installer It appears as a beacon that was not synchronized 43 06 17 H 5 54 03 E 24 19 1 Speed in Knots 2 GPS adjustable unit 3 Rssi Ambient Noise Radio 4 Cap and Compass Access to menu2 user is still pressing the black button next for 2 se conds when the unit is in navigation mode above A In case of communication problem with the antenna the message Antenne is displayed 23 User Manual Divansi OP
20. ng the time since the last coordinate sets received 6 GPS coordinates of the Man Overboard T Distance from Man Overboard 8 Direction to follow towards the Man Overboard 9 Course to follow to retrieve the Man Overboard 26 User Manual Divansi MOB OPERATION CONSOLE Management of nuisance alerts The Divansi MOB system manages the untimely alerts provided that syn chronization has been carried out with the ship s console of belonging This mode allows you to manage onboard Alerts of a beacon that would have been triggered unnecessarily for a period of 3 minutes To stop the Untimely alert to the beacon replace the red pin and press the Black test button On the console message STOP appears beyond 3 minutes the alert is sent to all Divansi network Managing multiple alerts The system can handle up Divansi MOB 30 alerts In this case several pages are created cf Page 21 To access the page you want just keep pressing the button black next Warning Select the screen to erase using the black button Next then stay supported five seconds on the same button A countdown appears erased alert is lost If an alarm punch button is triggered and it is not reset message reset the punch button appears when erasing So just reset the punch button to clear the alarm MOB EXTERNAL User Manual Divansi MOB 27 OPERATION BEACON 1 Standby Sta
21. orized distributors so that the latter is recovered all components at the time of replacing either the user specifies the address to which these components can be sent In cases where these solutions are not possible the user required to reach the center of waste management which it depends for to deposit all the compo nents of the system The user must ensure compliance with these regulations on the management electronic waste and that they must be a special treatment A logo depicting a dustbin is present on the packaging for this purpose 2 User Training The user agrees to read in full this manual before using the system In case of misunderstanding or difficulties in interpretation of any information contained in this manual the user can to contact the company SEAREKA mailing us at technical service seareka com or one of its authorized distri butors 38 User Manual Divansi General Indication 3 Responsibility SEAREKA It is specified that the obligation to SEAREKA or one of its authorized distribu tors is an obligation of means because the destination system is to contribute to the location of a person without making it systematically exact and infal lible and thus to provide further assistance in the location and management of man overboard It is recalled that the user management assistance and location nor is fully effective only if weather conditions environmental human material and other exte
22. ps of significant size it is preferable that the antenna Divansi MOB is located above the edge console for the information displayed distance and course to steer to be more precise User Manual Divansi 9 INSTALLATION The console panel can be fixed in 2 ways 1 Embedded in the console Please cut your desk with dimensions 1 128 92 a Cut the bracket to length so that b Screw the caliper at the rear it can flatten of the console using two screws 40mm provided 30mm x minimum 30mm thickness of the panel 2 Mounted on its support bracket 10 User Manual Divansi MOB INSTALLATION Connection Base ANT To connect the cable of the Antenna Dome Divansi MOB 8 pins Base BAT To connect to the power cable 10 pins Son tracking power cable Blue et Red DC voltage source battery power board of 8V to 30V 500mA max provide security and thermal switch series Brown and Blue external switch alarm MOB to trigger the opening Gray and Pink dry contact outputs for alarm and external light or tracer 2A 30VDC max 1 The contact is open by default closes immediately in the event of MOB or MOB ex ternal for an adjustable duration time relay However in case of alarm beacon contact closure may be delayed in order to manage false alarms delays relay Green and Yellow TX serial output RS422 RX serial input RS422 Blanking plugs provided mus
23. r respective connectors 2 on the beacon of Individual Location Please be careful especially not to remove the pin Alarm red during rinsing The system will function correctly only if installation is performed as described in this manual It is therefore important to read this manual carefully and completely before use N Compliance with these conditions is involved directly in maintaining good operation of the system 32 User Manual Divansi Conditions of maintenance and storage 2 Gonditions storage Compliance with these storage conditions is directly involved in good system operation and durability The ideal storage temperature is 20 C in a dry place and away light rays For long term storage make sure the tag is cleaned with fresh water antenna part the self test button and pin to prevent jamming when used 3 he risk for non compliance He reminded the user that any lack of repair or maintenance of any irregularity can cause partial or total failure of the system the preservation or storage of elements of the system in an environment Inadequate wetland may have the same consequences In case of malfunction repair or intervention of a person with the necessary skills can seriously damage the system and its operation the owner or custo dian of the system then assumes full responsibility Only authorized resellers or distributors will intervene SEAREKA in equipment repair It is thus remin
24. resented may change depending on availability 1 Antenna A white dome a turn 2 Console A console with table for supporting 1 x1 4 and bracket Two thumbscrews Two cable sealing plugs 3 Beacon Sold separately Red 4 Alert button 5 5 Audible and transparent security A pin red optional Alarm alarm and bright alarm A clip with screws provided punch Sold separately 7 User 6 Power cable 2m with nuel connector IP68 It also integrates the connection of the external siren the Alert button punch and a serial output User Manual Divansi INSTALLATION User Manual Divansi INSTALLATION D me Antenna Divansi 5 17 is essential organ of communication between 5 and boats It allows to receive radio signals from beacons to transfer to the console and return them to other boats it integrates a GPS positioning a compass and a radio module It consists of 1 A dome screwed and sealed with a platinum a mounting bracket 1 x14 filletage standard 2 A connecting cable to the console Divansi c hnector ANT Installation Mount the antenna vertically the outside as high as possible on board ves sel in order to have the highest radio range Lengthen the cable if necessary Turn it so that the output of the cable is oriented port side of the boat Remove from met
25. rnal elements are optimal It is also stated to the user that the system is not a system security as such and recalled that he did not aim to avoid incidents or accidents but it aims to mi nimize the consequences contributing to a location faster and more accurate Man overboard Consequently it cannot and should under no circumstances replace the other security systems commonly used the user but in no circumstances limit the location or other means of security usually put in place User Manual Divansi 39 General Indication 4 Fault and liability limits As stated in general terms and conditions accepted by the user before the acquisition of the system in case of total or partial failure of system the res ponsibility of SEAREKA or one of its authorized distributors only may be ques tioned if this fault is a hidden defect intrinsic the system that is to say a failure to design construction assembly or material In order to assert his rights the Customer shall on pain forfeiture o fany action in connection therewith inform SEAREKA or one of its distributors ap proved in writing of the existence of defects within a maximum of ten 10 days of their discovery SEAREKA or one of its authorized dealers will repair or replace Product or warranty parts found defective This warranty also covers the cost of labor Replacement products or parts defective will not have the effect of extending the duration of the
26. s During the initial commissioning test of all system components Beacon console and antenna technique is mandatory User Manual Divansi OPERATION CONSOLE 1 Home screen STATUS 01 After starting the Console the Welcome screen appears and the binding assay is performed Console antenna t aan g s bull 00 STATUS 02 If it is operational in the state it passes below In If not try res tarting the whole 3 Divorisio o config 1 LOGO It indicates that the system is operational 2 Console Version 2 00 3 Config allow you to enter the Setup Menu by pressing the red button MOB Menu1 extended User Manual Divansi MOB 15 OPERATION CONSOLE 2 Setting Access to the menu can be done either when viewing the screen ETAT 02 Home previous chapter by pressing the button to access the Menu to extended or by pressing for 2 seconds on the black button following in the navigation window Menu2 user The window below appears and allows you to access the different settings BRIGHTNESS CONTRAST AFRFIVAL ALARM GPS COORDINATES Select Next Press the black button suiv to select the type of set ting you want The selected topic appears on the first line in bold To confirm your choice press the red button MOB It is possible to perform a rapid sequence of topics still pressing the button below To exit the menu Select Quit from
27. seconds to return to menu TIME RELAY DURATION lt f 11 14 60 Press the red button bs Wet the black button to p choose the duration of the relay 18 User Manual Divansi OPERATION CONSOLE LANGUAGE FRENCH Press the black button next to ENGLISH choose the language Validate by Next u pressing the red button Allows a control of beacons autotests Press the black button to scroll Press the red button to exit Press the red button for exit or wait for 10 seconds to go back to the menu m EXIT Press the black button next to MAXSE choose the serial output Validate s by pressing the red button oy J Next x k select User Manual Divansi 20 OPERATION CONSOLE User Manual Divansi CONSOLE TABLE OF MODES MOB Beacon GDivansi Display Red Pin Up All Leds Off Press 3 times on the Test Button Stop Test Different test stes are identified by beep and Led Beep for each issue Lamp flash every 3 seconds Extraction of the Radio Broadcast MOB red pin Noise emission during the outbreak for 3 minutes User Manual Divansi 21 CONSOLE wd Console Speed position ship bearing Press red button Display counts down seconds 3 seconds Warning MOB Activation punch button Warning MOB EXT 3 short presses on black Self test pe
28. t always be on bases when they are not connected to their respective cables The dry contact may not cause an automatic change of pace propulsion or drive in case of MOB However it can automatically control the shutdown of the propulsion safe distance compasses CF45 User Manual Divansi ll INSTALLATION Beacon Divansi MOB BV12 The beacon allows individual Divansi MOB alert and position a person fell to the sea 12 9 9 6 9 1 5 Allows the positioning of the tag 2 Flash lamp LED Allows visual identification 3 Colored lights Beacon status 4 A radio antenna Automatic deployment transmitting the coordinates via the network MOB DIVANSI 5 A black button Allows user to activate self test and the judgment of the tag 6 Ared pin Allows activation of the alert Also contains A belt clip Anon rechargeable battery Li ion User Manual Divansi INSTALLATION Installation The beacon should be integrated into a Divansi apBroved life vest Activation of the beacon is performed during inflation of a lifejacket This solution eliminates false alarms For proper operation of the beacon and GPS the antenna must be cleared of any metal surface and out of water Safe distance compasses CF45 User Manual Divansi 13 OPERATION Before all uses of the system you should make sure to have previously followed the instructions of facilitie
29. t can also be of fered the temporary disposal of another system by SEAREKA or one of its authorized distributors and sending the failed system by the user in the local technical services SEAREKA or one of authorized distributor for repair In this case the routing system troubleshooting in the user premises is carried out by SEAREKA or one of its authorized distributors who takes responsibility while that the sending of faulty equipment at the premises of SEAREKA or one of its authorized distributors is in turn organized by the user who assumes the risks In all cases the user pays all charges and expenses of repair and comple teness of the cost of transporting both sides a quote containing the cost of sending SEAREKA or one of its authorized distributors and hourly rate with a technician repair time is estimated release prior to the user It is recalled that any repair or intervention by a third party with neces sary powers can seriously damage the system and its operation the user owner or custodian system assumes full responsibility and then loses any guarantee from SEAREKA or one of its distributors N approved 36 User Manual Divansi 9 MOB GENERAL INDICATION User Manual Divansi 37 General Indication 1 Waste Management When the user does not intend to use the system or when the system or one of its components is permanently removed from service the user undertakes to contact SEAREKA or one of its auth
Download Pdf Manuals
Related Search