manufacturers instructions - Peerless-AV
Contents
1. Attach tilt plate D to bottom plate Q with four Attach tilt plate D to column bracket C with four M10 x 15 mm button socket cap screws K 5 16 18 x 3 8 button socket cap screws I as Tighten screws using 6 mm allen wrench M shown in rear view Tilt can be adjusted to 0 or 30 REAR VIEW 5 of 10 ISSUED 09 30 11 SHEET 009 9056 5 2014 04 08 Attach top plate P to adapter plate E with four Secure four rubber feet R to bottom of CPU as M10 x 15 mm penta pin screws T shown below Tighten screws using penta pin tool U o ZA CPU MAY APPEAR DIFFERENT THAN ILLUSTRATED C Secure CPU to top plate P using safety belt amp Secure top plate P to bottom plate Q with four NOTE Safety belt may need to be loosened to M8 x 15 mm screws S as shown in rear view Tighten screws using 4 mm allen wrench V attach CPU to component box top plate SAFETY BELT REAR VIEW 6 of 10 ISSUED 09 30 11 SHEET 009 9056 5 2014 04 08 Installing Adapter Brackets to Flat Panel Display A WARNING Tighten screws so adapter brackets are firmly attached Do not tighten with excessive force Overtightening can cause stress damage to screws greatly reducing their holding power and possibly causing screw heads to become detached Tighten to 40 in2. Zz DISPLAY fig 8 2 Bore MULTI WASHER enm sas mmj SCREW ADAPTER BRACKET F S If you have any questions please call Peerless customer care at 1 800 865 2112 8 of 10 ISSUED 09 30 11 SHEET 009 9056 5 2014 04 08 Mounting Flat Panel Display Cable Management Hook adapter brackets F onto adapter plate E Run cables through column B using cable management holes Then slowly swing display down as shown Turn Security screws using 4 mm security allen wrench V clockwise at least six times to prevent display from being removed as shown in detail 1 of figure 9 1 NOTE To lock the display down tighten security screws to adapter plate E as shown in detail 1 SECURITY SCREWS DETAIL 1 Service and Maintenance 11 This product has no user serviceable parts 9 of 10 ISSUED 09 30 11 SHEET 009 9056 5 2014 04 08 2014 Peerless Industries Inc All rights reserved All other brand and product names are trademarks or registered trademarks of their respective owners Peerless Industries Inc 2300 White Oak Circle Aurora Il 60502 www peerless av com LIMITED FIVE YEAR WARRANTY Peerless Industries Inc Peerless warrants to original end users of Peerless products will be free from defects in material and workmanship under normal use for a period of five years from the
3. Ib 4 5 N M maximum torque f screws don t get three complete turns in the display inserts or if screws bottom out and adapter brackets are still not tightly secured damage may oXur to display or product may fail display face side down Refer to display manufacturers instructions or customer service for removing any knobs base cover or screw s on the back of the display to prepare mounting These need to be removed to allow the adapter brackets F to be attached Select the small medium large or extra large screws from the baffled fastener pack then attach adapter brackets to display following figure 8 1 or 8 2 O To prevent scratching the display set a cloth on a flat level surface that will support the weight of the display Place NOTE Top and bottom mounting holes must be used for attaching adapter brackets Verify that all holes are properly aligned and then tighten screws using 4 mm security allen wrench BB X Y 0 0 0 0 8 8 0 0 i 0 F CENTER BRACKETS VERTICALLY ON BACK o OF DISPLAY H U U 9 g A LX NOTE X dimensions should be equal Notes MULTI WASHER The number of fasteners used will vary MEDIUM HOLE FOR M5 SCREWS depending upon the type of display Multi washers and spacers may not be SMALL HOLE FOR M4 SCREWS G LARGE HOLE FOR M6 i Et used depending upon t
4. d is shaken or hit Not recommended for use in areas with heavy traffic Death or serious injury may occur when children climb on audio and or video equipment furniture A remote control or toys placed on the furnishing may encourage a child to climb on the furnishing resulting in the furnishing tipping over on to the child Relocating audio and or video equipment from this cart or stand to furniture not specifically designed to support audio and or video equipment may result in death or serious injury due to the furnishing collapsing or over turning onto a child This product is intended for indoor use only Use of this product outdoors could lead to product failure and personal injury Tools Needed for Assembly phillips screwdriver Table of Contents J J J 207 Pans MAST NI eE MP 3 4 Assembling Standdas oce cuenten dentaire dE oett ri tuer aaa e teer vede a eda ege rre ed Reque edu vespere E Ped UR ce adea sede a 5 Installing Adapter Brackets to Flat Panel Display ssssssessssssssssssseseeeeeenn nennen R EA TEE n nenas 7 Mounting Flat Pamel Display 5 aonane eb eI hte i aee Ern oot eb Us t ei eo E ee Eb kate 9 Gable Management ors cendres ep atte ee ERE dE ket Veg suba ne dn pa dE EE eu BAD eo BER ranae a VET sp audes fase Lu neun 9 2 of 10 ISSUED 09 30 11 SHEET 009 9056 5 2014 04 08 Before you begin make sure all parts shown ar
5. date of purchase by the original end user but in no case longer than six years after the date of the product s manufacture At its option Peerless will repair or replace or refund the purchase price of any product which fails to conform with this warranty In no event shall the duration of any implied warranty of merchantability or fitness for a particular purpose be longer than the period of the applicable express warranty set forth above Some states do not allow limitations on how long an implied warranty lasts so the above limitation may not apply to you This warranty does not cover damage caused by a service or repairs by the customer or a person who is not authorized for such service or repairs by Peerless b the failure to utilize proper packing when returning the product c incorrect installation or the failure to follow Peerless instructions or warnings when installing using or storing the product or d misuse or aXident in transit or otherwise including in cases of third party actions and force majeure In no event shall Peerless be liable for incidental or consequential damages or damages arising from the theft of any product whether or not secured by a security device which may be included with the Peerless product Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitation or exclusion may not apply to you This warranty is in lieu of all other warranties expres
6. e included with your product Parts List Description Qty Part Number base 009 1425 column 009 1426 column bracket 009 1424 tilt plate 009 1423 adapter plate 201 1110 adapter bracket 202 1655 3 8 16 x 1 button socket cap screw 520 1354 5 16 18 x 3 8 button socket cap screw 520 1693 M10 lock washer 540 9424 M10 x 15 mm button socket cap screw 520 9262 3 8 16 X 2 1 2 button socket cap screw 520 9550 6 mm allen wrench 560 9716 7 32 allen wrench 560 9715 3 16 allen wrench 560 0071 top plate 201 1724 bottom plate 201 1699 rubber feet pack of four 570 1036 M8 x 15mm socket pin screw 520 1068 M10 x 15mm penta pin screw 520 9263 M10 penta pin tool 520 9260 4mm allen wrench 560 9646 Parts may appear slightly different than illustrated cuaomouozzmrs5c rimmoou 3 of 10 ISSUED 09 30 11 SHEET 009 9056 5 2014 04 08 M8 x 12mm 4 520 1064 520 1724 75 spacer 4 M5 x 25mm 4 M8 x 25mm 4 940 1059 520 1122 520 1211 520 1101 Multi washer 4 580 1398 4 of 10 ISSUED 09 30 11 SHEET 009 9056 5 2014 04 08 Attach column B to base A with three Attach the column bracket C to column B with 3 8 16 x 2 1 2 button socket cap screws L and three 3 8 16 x 1 button socket cap screws H three M10 lock washers J Tighten screws using Tighten screws using 7 32 allen wrench N 7 32 allen wrench N
7. he type of display Use the corresponding hole in the multi washer that matches your screw size as C shown NOTE For flat back displays proceed to step 8 1 For bump out or recessed back display skip to step 8 2 7 of 10 ISSUED 09 30 11 SHEET 009 9056 5 2014 04 08 For Flat Back Display Begin with the shortest length screw hand thread through multi washer and adapter bracket into display as shown below Screw must make at least three full turns into the mounting hole and fit snug into place Do not over tighten If screw cannot make three full turns into the display select a longer length screw from the baffled fastener pack Repeat for remaining mounting holes level brackets and tighten screws NOTE Spacers may not be used depending upon the type of display fig 8 1 DISPLAY Yi A emu SCREW ADAPTER BRACKET F V P If you have any questions please call Peerless customer care at 1 800 865 2112 For Bump out or Recessed Back Display Begin with longer length screw hand thread through multi washer adapter bracket and spacer in that order into display as shown below Screw must make at least three full turns into the mounting hole and fit snug into place Do not over tighten If screw cannot make three full turns into the display select a longer length screw from the baffled fastener pack Repeat for remaining mounting holes level brackets and tighten screws
8. peerless Installation and Assembly 32 65 81 165 cm Kiosk Stand Models SS560FK Suitable For Institutional Use C US LISTED Max UL Load Capacity 150 Ib 68 kg display 15 Ib 6 8 kg component 2300 White Oak Circle Aurora Il 60502 800 865 2112 Fax 800 359 6500 www peerless av com ISSUED 09 30 11 SHEET 009 9056 5 2014 04 08 NOTE Read entire instruction sheet before you start installation and assembly A WARNING Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet If you have any questions regarding any of the instructions or warnings for US customers please call Peerless customer care at 1 800 865 2112 for all international customers please contact your local distributor This product should only be installed by someone of good mechanical aptitude and fully understands these instructions Never exceed the Maximum UL Load Capacity on page 1 Use with heavier televisions may result in instability causing tip over resulting in death or serious injury Always use an assistant or mechanical lifting equipment to safely lift and position equipment Tighten screws firmly but do not overtighten Overtightening can damage the items greatly reducing their holding power The cart or stand is not affixed or secured to the floor and may therefore tip over and or fall if screen and or stan
9. sed or implied and is the sole remedy with respect to product defects No dealer distributor installer or other person is authorized to modify or extend this Limited Warranty or impose any obligation on Peerless in connection with the sale of any Peerless product This warranty gives specific legal rights and you may also have other rights which vary from state to state peerless Av www peerless av com 2014 Peerless Industries Inc 10 of 10 ISSUED 09 30 11 SHEET 009 9056 5 2014 04 08
Download Pdf Manuals
Related Search