ELATION EZ KLING - USER MANUAL ver 1
Contents
1. many DMX channels each device occupies For example if the LED lighting devices all occupy 20 DMX channels each the first device would be addressed as 1 the second device as 21 the third device as 41 and so on 10 EZ KLING User Manual Version 1 ATI www elationlighting com IS IMPORTANT NOTES EZKLING can control LED Tape RGB Tri Color LED Lighting and RGBA RGBW Quad LED Lighting Be sure EZ KLING has been set to the proper mode to control the desired type of LED Tape and or Lighting ing EZ KLING To DMX Controller LED Tape 170 Pixels Computer KLINGNET LED Tape 600 Pixels Computer KLINGNET RGB Tri Color LED Tape 150 Pixels Computer KLINGNET RGBA RGBW Quad LED Lighting 112 Pixels Computer ARTNET LED Tape 170 Pixels Computer ARTNET RGB Tri Color LED Tape 170 Pixels Computer ARTNET RGBA RGBW Quad LED Lighting 128 Pixels When connecting to a computer to control LED Lighting the LED type of LED lightings controlled by the same EZ KLING unit must be the same DO NOT directly daisy chain more than 50 EZ KLING units from one computer Use a Gigabit Ethernet Switch if more than 50 EZ KLING units are being controlled DO NOT daisy chain more than 50 EZ KLING units from a single network port of the Gigabit Ethernet Switch A maximum of 2 output network ports of the Gigabit Ethernet Switch can be used controlling a maximum of 100 EZ2. DMX OPERATION When EZ KLING is used to control RGB 3in1 LED lighting the lighting must be set to DMX mode and must include a separate dimmer control for each color RED GREEN BLUE When EZ KLING is used to control RGBA RGBW Quad LED lighting the lighting must be set to DMX mode and must include a separate dimmer control for each color RED GREEN BLUE AMBER and or RED GREEN BLUE WHITE The total number of DMX channels will depend on how many individual pixels the LED lighting has EXAMPLE 1 If an RGB 3in1 LED light fixture has 6 pixels it must be set to 18 DMX Channel Mode and the DMX protocol be set to the following D e Function T 000 255 RED 0 100 2 000 255 GREEN 0 100 3 000 255 BLUE 0 100 m Y v 16 000 255 RED 0 100 7 000 255 GREEN 0 100 18 000 255 BLUE 0 100 EXAMPLE 2 If an RGBA RGBW 4in1 LED light fixture has 6 pixels it must be set to 24 DMX Channel Mode and the DMX protocol be set to the following Channel Dh e Function RED 0 100 GREEN 0 100 BLUE 0 100 AMBER WHITE 0 100 000 255 RED 0 100 000 255 GREEN 0 100 000 255 BLUE 0 100 000 255 AMBER WHITE 0 100 DMX ADDRESSING The DMX address of the first LED lighting device connected to EZ KLING must be set to 1 and the DMX addresses of additional LED lighting devices will depend on how
3. always ON ON OFF OPTION BLGT OFF LED Backlight OFF after 20 seconds OTHER TOD Backlight SETING Brightness OPTION BRCO xxx Adjust the brightness of the LCD backlight System Reset OPTION SYSRESET inifiaize the unit back to The original factory settings LED TAPE MODE Press the MODE button to select LED TAPE MODE The LCD display will show LED TAPE then press UP or DOWN buttons to select the total number of pixels 1 170 the DMX controller needs to control IF Each EZ KLING can control a maximum of 170 pixels KLINGNET MODE Type Set Press the MODE button to select KLINGNET The LCD display will show RGB TAPE or DMX RGB Select one of these two menu items by pressing the UP or DOWN buttons 12 EZ KLING User Manual Version 1 ATI www elationlighting com KLINGNET MODE LED Color Set Press the MODE button to select KINGNET The LCD display will show the default LED Color Set DMX RGB To change this menu item press the SET UP button and RGB will start to flash then press the UP or DOWN buttons to select the desired LED Color Set DMX RGB DMX RGBW DMX RGBA KLINGNET MODE Pixel Height and Width Set Press the MODE button to select KINGNET The LCD display will show the preselected LED Color Set DMX RGB DMX RGBW DMX RGBA Press the SET UP button and DMX will start to flash then press the SET UP button again and the preselected LED Color Set RGB RGBW RGBA will sta
4. carton for damage that may have occurred during shipping If the carton appears to be damaged carefully inspect your unit for damage and be sure all accessories necessary to operate the unit have arrived intact In the event damage has been found or parts are missing please contact our customer support team for further instructions Please do not return this unit to your dealer without first contacting customer support at the number listed below Please do not discard the shipping carton in the trash Please recycle whenever possible BOX CONTENTS 1 5V Power Supply 1 Clamp Mounting Bracket amp 2 Screws Manual amp Warranty Card 4 EZ KLING User Manual Version 1 ATK www elationlighting com CUSTOMER SUPPORT Elation Professionals provides a customer support line to provide set up help and to answer any question should you encounter problems during your set up or initial operation You may also visit us on the web at www elationlighting com for any comments or suggestions For service related issue please contact Elation Professional ELATION SERVICE USA Monday Friday 8 00am to 5 00pm PST Voice 323 582 3322 Fax 323 832 9142 E mail support elationlighting com ELATION SERVICE EUROPE Monday Friday 08 30 to 17 00 CET Voice 31 45 546 85 30 Fax 31 45 546 85 96 E mail support elationlighting eu WARRANTY REGISTRATION The EZ KLING carries a two year 730 days limited warranty Please fill out the
5. pressing the UP or DOWN buttons OTHER SETTING LCD Backlight Brightness Press MODE button to select OPTION then press SET UP button to select BRCO xxx Adjust LCD Backlight Brightness level by pressing UP or DOWN buttons to adjust the value from 000 not bright to 100 very bright OTHER SETTING System Reset Press MODE button to select OPTION then press SET UP button to select SYSRESET which will start to flash on the LCD display While SYSRESET is still flashing press UP and DOWN buttons at the same time and all the settings will be reset back to factory defaults Sp CAUTION DOING WILL ERASE ALL PREVIOUSLY SAVED SETTINGS 14 EZ KLING User Manual Version 1 www elationlighting com CONFIGURATION GUIDE 1 DMX Controller EZ KLING LED Tape DMX OUT P spin DIN DMX 512 Controller Notincluded illustration purposes only 2 PC Control EZ KLING LED Tape LEDTAPE Juded illustration purposes on LEDTAPE Wot included illustration purposes only iz dill LED Tapes iy Arsen lt 9 2 a cats OUT N a PC with Kinget ArtNet CATS Notincldad iustration purposas oniy o CATse IN en wmm EI N LED TAPE ot ncluded lustration purposes only iss lt gt 148 3pinDMXOUT N d LED LIGHTING Not included illustration purposes only 15 S
6. the SET UP button to select ARTNET IP3 xxx and press the UP or DOWN buttons to enter the desired 3 digit IP Address of Section 4 13 EZ KLING User Manual Version 1 ATI www elationlighting com ARTNET MODE IP Address Set Sub Net Mask and DMX Universe Output Set continued Once the complete desired IP Address Set has been entered continue by pressing the SET UP button and the LCD display will show SWO xxx then press the UP or DOWN buttons to enter the desired 3 digit Subnet Mask of Section 1 then press the SET UP button to select SW1 xxx and press the UP or DOWN buttons to enter the desired 3 digit Subnet Mask of Section 2 then press the SET UP button to select SW2 xxx and press the UP and DOWN buttons to enter the desired the 3 digit Subnet Mask of Section 3 then press the SET UP button to select SW3 xxx and press the UP or DOWN buttons to enter the desired 3 digit Subnet Mask of section 4 Once the complete desired Sub Net Mask has been entered continue by pressing the SET UP button and the LCD display will show U xxxxx then press the UP or DOWN buttons to enter the desired 5 digit DMX Universe Output OTHER SETTING LCD Backlight ON OFF Press MODE button to select OPTION Select the desired function of the LCD Backlight BLGT ON LCD Backlight will remain ON in any situation or BLGT OFF LCD Backlight will automatically turn OFF after 20 seconds of no operation Select one of these two menu items by
7. ELATION 0 x N Lu EZ KLING user manual wont za NOILV13 ATI www elationlighting com 2014 ELATION PROFESSIONAL all rights reserved Information specifications diagrams images and instructions herein are subject to change without notice ELATION PROFESSIONAL logo and identifying product names and numbers herein are trademarks of ELATION PROFESSIONAL Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted Product names used in this document may be trademarks or registered trademarks of their respective companies and are hereby acknowledged All non ELATION brands and product names are trademarks or registered trademarks of their respective companies ELATION PROFESSIONAL and alll affiliated companies hereby disclaim any and all liabilities for property equipment building and electrical damages injuries to any persons and direct or indirect economic loss associated with the use or reliance of any information contained within this document and or as a result of the improper unsafe insufficient and negligent assembly installation rigging and operation of this product Elation Professional USA 6122 S Eastern Ave Los Angeles CA 90040 323 582 3322 323 832 9142 fax www elationlighting com info elationlighting com Elation Professional B V Junostraat 2 6468 EW Kerkrade Net
8. KLING units EZ KLING User Manual Version 1 Ea www elationlighting com MENU FUNCTION The EZ KLING has 4 operation modes LED TAPE MODE KLINGNET MODE ARTNET MODE and OTHER SETTING which can be selected by pressing the MODE button TAPE_ No Function LED TAPE xxxx Set number of Pixels DMX controller needs to control MODE mem KUINGNETRGB Control LED Tape using KUINGNET KLINGNET DMX RGBX_ Control LED Lighting using KUNGNET KLING KLINGNET DMX RGB Control RGB LED Lighting NET LED Color Set KLINGNET DMX RGBW Control RGBW LED Lighting MODE KLINGNET DMX RGBA Control RGBA LED Lighting Pixel Height Set KLINGNET H xxx Set the Pixel Height number EZ KUNG needs fo control Pixel Width Set KLINGNET W xxx Set the Pixel Width number EZ KLING needs fo control Type Set ARTNET OUTTAPE Control LED Tape using ARTNRT ARTNET OUT DMX Control LED Lighting using ARTNRT ARTNET IPO xxx Set IP Address Section T IP Address Set LARTNETIPT xxx Set IP Address Section 2 ART ARTNET IP2 xxx Set IP Address Section 3 NET ARTNET IPS xxx Ser IP Address Section 4 MODE ARTNET SWO xxx Set Subnet Mask Section Subnet Mask Set L ARINETSWI xxx Set Subnet Mask Section 2 ARTNET SW2 xxx Set Subnet Mask Section 3 ARTNET SWS xxx Set Subnet Mask Section 4 ARTNET U xxxxx Set output DMX Universe TCD Backlight OPTION BLGT ON TED Backlight
9. Specifications and improvements in the design of this unit and this manual are subject to change without any prior written notice 17 EZ KLING User Manual Version 1 www elationlighting com OPTIONAL ACCESSORIES ORDER CODE NARROW CLAMP PRO 2 Wrap Around Style Clamp AC3PDMX5PRO 5 ft 1 5m 3pin PRO DMX Cable AC3PDMX10PRO 10 ft 3m 3pin PRO DMX Cable AC3PDMX15PRO 15 ft 4 5m 3pin PRO DMX Cable Additional Cable Lengths Available DMX WORKSHOP alternative software option http artisticlicence com index php mode products amp sub overview amp action amp product id 351 18 EZ KLING User Manual Version 1 www elationlighting com NOTES 19 EZ KLING User Manual Version 1
10. ce using standard CATSe cable Connect the EZ KLING device to the LED Lighting using DMX signal cable Map the LED Lighting by MADRIX Generator or Patch Control the LED Lighting by the MADRIX software lease refer to MADRIX user manual for more information pi 16 EZ KLING User Manual Version 1 www elationlighting com TECHNICAL SPECIFICATIONS FEATURES RJ45 to DMX and RJ45 to KlingNet or ArtNet protocol support Pixel Map KlingNet and DMX Compatible Fixtures through the KlingNet mapper Drive up to 600 Flex Pixel RGB pixels using KlingNet control protocol Drive up to 170 DMX Pixels via ArtNet DMX control protocol CONTROL CONNECTIONS DMX 512 KingNet ArtNet 4 Button Control Panel and LCD Menu Display 6 Bare Wire Terminal Block 1 3pin DMX Input 1 Spin DMX Output 2 RJ45 Bilateral Ports 1 SVDC Power Supply Input SIZE WEIGHT Length 5 31 134 9mm Width 4 92 125mm Vertical Height 1 61 40 9mm Weight 1 0 Ibs 0 45kg ELECTRICAL THERMAL 5VDC 5W Max Power Consumption APPROVALS RATINGS CE Approved INCLUDED ITEMS 5VDC Power Supply Back Panel Magnet for Easy Installation to a Metal Surface Mini Omega Bracket For Clamp Truss Mounting DIMENSIONAL DRAWINGS 125mm Falun 5 S g e o Z E 0000 125mm In S M ul 9 9 Please Note
11. cord has become frayed crimped and or damaged If the power cord is damaged replace it immediately with a new one of similar power rating NEVER OPEN DEVICE WHILE IN USE DO NOT operate device in locations above 113 F 45 C or below 14 F 10 C DO NOT operate device in areas subject to extreme vibrations or bumps Please make sure there are NO FLAMMABLE MATERIALS close to this device while operating to prevent any fire hazard Do not permit operation by persons who are not qualified for operating this type of device Most damages are the result of operations by nonprofessionals Use the original packaging and materials to transport this device in for service DO NOT attempt installation and or operation without knowledge how to do so Most damages are the result of operations by nonprofessionals DO NOT shake device avoid brute force when installing and or operating When installing device overhead in a suspended location always install with an appropriate safety cable When installing the fixture in a suspended environment always use mounting hardware that is no less than M10 x 25 mm also be sure the hardware Is insert in the pre arranged screw holes in the bracket of the device Use the original packaging and materials to transport the device in for service 7 EZ KLING User Manual Version 1 Ea www elationlighting com DEVICE OVERVIEW on 10 1 2 3 MODE Button SETUP Butt
12. enclosed warranty card to validate your purchase All returned service items whether under warranty or not must be freight pre paid and accompany a return authorization R A number The R A number must be clearly written on the outside of the return package A brief description of the problem as well as the R A number must also be written down on a piece of paper and included in the shipping container If the unit is under warranty you must provide a copy of your proof of purchase invoice Items returned without a R A number clearly marked on the outside of the package will be refused and returned at customer s expense You may obtain a R A number by contacting customer support IF IMPORTANT NOTICE There are no user serviceable parts inside this unit Do not attempt any repairs yourself doing so will void your manufactures warranty Damages resulting from modifications to this fixture and or the disregard of safety and general user instructions found in this user manual void the manufactures warranty and are not subject to any warranty claims and or repairs s EZ KLING User Manual Version 1 ATI www elationlighting com 2 YEAR LIMITED WARRANTY A Elation Professional hereby warrants to the original purchaser Elation Professional products to be free of manufacturing defects in material and workmanship for a period of two years 730 days from the date of purchase This warranty shall be valid only if the product is purcha
13. herlands 31 45 546 85 66 31 45 546 85 96 fax www elationlighting eu info elationlighting eu DOCUMENT VERSION IZ Please check www elationlighting com for the latest revision update of this manual Document Software Date version Version Notes 7 2014 1 21 6 Initial release 2 EZ KLING User Manual Version 1 FLATI www elationlighting com CONTENTS General Information 4 Warranty 6 Safety Guidelines f Device Overview 8 Installation 9 DMX Operation 10 Important Notes 11 Menu Function 12 Configuration Guide 15 Setup Guide 16 Technical Specifications 17 Optional Accessories 18 3 EZ KLING User Manual Version 1 ATI www elationlighting com GENERAL INFORMATION INTRODUCTION Congratulations you have just purchased one of the most innovative and reliable ArtNet to DMX converter on the market today The EZ KLING has been designed to perform reliably for years when the guidelines in this booklet are followed Please read and understand the instructions in this manual carefully and thoroughly before attempting to operate this unit These instructions contain important information regarding safety during use and maintenance UNPACKING Thank you for purchasing the EZ KLING by Elation Professional Every EZ KLING has been thoroughly tested and has been shipped in perfect operating condition Carefully check the shipping
14. ng 4 Set the Pixel Height and Width numbers each EZ KLING device needs to control 5 Connect the Computer to the EZ KLING device using standard CATS cable 6 Connect the EZ KLING device to the LED Lighting using DMX signal cable 7 Map the LED Lighting by KlingNet Mapper 8 Control the LED Lighting by Arkaos Media Master software Please refer to the Arkaos Media Master user manual for more information NOTE When connecting EZ KLING to a Computer using KLINGNET to Control LED Tape or LED Lighting and after making any setting changes on EZ KLING you MUST close KlingNet Mapper and restart it to remap the LED Tape or LED Lighting again to make the new EZ KLING setting changes take effect When connecting EZ KLING to a Computer using ARTNET to control LED Tape Install MADRIX software on your Computer Set EZ KLING to ARTNET mode and set it to control LED Tape Connect the Computer to the EZ KLING device using standard CATS cable Connect the LED Tape to the Bare Wire Terminal Block on EZ KLING Map the LED Tape by the MATRIX Generator or Patch Control the LED Tape by the MADRIX software Please refer to MADRIX user manual for more information sonen When connecting EZ KLING to a Computer using ARTNET to control LED Lighting Install MADRIX software on your Computer Set EZ KLING to ARTNET mode and set it to control LED Lighting Connect the Computer to the EZ KLING devi
15. on UP Button DOWN Button Bare Wire Terminal Block 3pin DMX Output 3pin DMX Input Power Input RJ45 Network Input Output LCD Menu Display EZ KLING User Manual Version 1 ATK www elationlighting com INSTALLATION CAUTION Please consider the GB7000 15 EN60598 2 17 and the other respective national norms during the installation The installation must only be carried out by a qualified person CAUTION The electric connection must only be carried out by a qualified electrician IF CAUTIONS For added protection mount the device in areas outside walking paths seating areas or in areas were unauthorized personnel might reach the fixture Before mounting the device to any surface make sure the installation area can hold a minimum point load of 10 times the weight of the fixture 10 Ibs 4 5 kg Device installation must always be secured with a secondary safety attachment such as an appropriate safety cable Never stand directly below the device when mounting removing or servicing The applicable operating temperature for the device is between 10 C to 45 C Do not use the device under or above this temperature range FLAMMABLE MATERIAL WARNING Keep fixture at least 5 0 ft 1 5m away from any flammable materials decorations pyrotechnics etc INSTALLATION VIA MAGNET ON BACK PANEL OR INCLUDED BRACKET 9 EZ KLING User Manual Version 1 www elationlighting com
16. or damage direct or consequential arising out of the use of or inability to use this product G This warranty is the only written warranty applicable to Elation Professional Products and supersedes all prior warranties and written descriptions of warranty terms and conditions heretofore published 6 EZ KLING User Manual Version 1 Eno www elationlighting com SAFETY GUIDELINES The EZ KLING is an extremely sophisticated plece of electronic equipment To guarantee a smooth operation it is Important to follow the guidelines in this manual The manufacturer of this device will not accept responsibility for damages resulting from the misuse of this device due to the disregard of the information printed in this manual This device falls under PROTECTION CLASS 1 It s essential this device is grounded properly and only qualified personnel perform all electrical connections For proper operation only qualified and certified personnel should perform Installation of this device Do not attempt installation and or operation without proper knowledge how to do so Any modifications to this device will void the warranty and increase the risk of damage and or personal injury Always disconnect from main power source before performing any type of cleaning procedure and or when this device is not in use Only handle the power cord by the plug end never pull out plug by tugging wire the cord Do not operate device if the power
17. pin DMX OUT lt PC with KlingNot ArtNet CATsa Notincluded illustration purposes only CATS OUT Addon ZKUNG Unit EZ KLING EZ KLING User Manual Version 1 www elationlighting com SETUP GUIDE When connecting EZ KLING to a DMX Controller and LED Tape 1 Set EZ KLING to LED TAPE MODE and set the total number of pixel to control 2 Connect the EZ KLING device to the DMX Controller using DMX signal cable 3 Connect the LED Tape to the Bare Wire Terminal Block on EZ KLING 4 Control the LED Tape by the DMX Controller When connecting EZ KLING to a Computer using KLINGNET to control LED Tape 1 Install Arkaos Media Master software on your Computer 2 Set EZ KLING to KLINGNET mode and set it to control LED Tape 3 Set the Pixel Height and Width numbers each EZ KLING device needs to control 4 Connect the EZ KLING device to the LED Tape using standard CATS cable 5 Connect the LED Tape to the Bare Wire Terminal Block on EZ KLING 6 Map the LED Tape by KlingNet Mapper 7 Control the LED Tape by Arkaos Media Master software Please refer to Arkaos Media Master user manual for more information When connecting EZ KLING to a Computer using KLINGNET to control LED Lighting 1 Install Arkaos Media Master software on your Computer 2 Set EZ KLING to KLINGNET mode and set it to control LED Lighting 3 Set the LED Color Set of the lighti
18. ring the period specified above Elation Professional will replace defective parts at its expense and will absorb all expenses for warranty service and repair labor by reason of defects material or workmanship The sole responsibility of Elation Professionak under this warranty shall be limited to the repair of the product or replacement thereof including parts at the sole discretion of Elation Professional All products covered by this warranty were manufactured after January 1 1990 and bare identifying marks to that effect E Elation Professional reserves the right to make changes in design and or improvements upon its products without any obligation to include these changes in any products theretofore manufactured F No warranty whether expressed or implied is given or made with respect to any accessory supplied with products described above Except to the extent prohibited by applicable law all Implied warranties made by Elation Professional in connection with this product including warranties of merchantability or fitness are limited in duration to the warranty period set forth above And no warranties whether expressed or implied including warranties of merchantability or fitness shall apply to this product after said period has expired The consumer s and or Dealer s sole remedy shall be such repair or replacement as is expressly provided above and under no circumstances shall Elation Professional be liable for any loss
19. rt to flash Press the SET UP button again and the LCD display will show H xxx then press the UP or DOWN buttons to enter the Pixel Height number EZ KLING needs to control Once the Pixel Height number value has been selected then press the SET UP button and the LCD display will show W xxx then press the UP or DOWN buttons to enter the Pixel Width number EZ KLING needs to control NOTE The Pixel Height number multiplied by the Pixel Width number can NOT be greater than 600 pixels when controlling LED Tape or NOT greater than 150 pixels when controlling RGB Tri Color LED Lighting and NOT greater than 112 pixels when controlling RGBW RGBA LED Lighting ARTNET MODE Type Set Press the MODE button to select ARTNET The LCD display will show OUT TAPE or OUT DMX Select one of these two menu items by pressing the UP or DOWN buttons ARTNET MODE IP Address Set Sub Net Mask Set and DMX Universe Output Set Press the MODE button to select ARTNET then press the SET UP button to select IP Address Set The LCD display will show ARTNET IPO xxx then press the UP or DOWN buttons to enter the desired 3 digit IP Address of Section 1 then press the SET UP button to select ARTNET IP1 xxx and press the UP or DOWN buttons to enter the desired 3 digit IP Address of Section 2 then press the SET UP button to select ARTNET 1 2 xxx and press the UP or DOWN buttons to enter the desired 3 digit IP Address of Section 3 then press
20. sed within the United States of America including possessions and territories It is the owner s responsibility to establish the date and place of purchase by acceptable evidence at the time service is sought B For warranty service send the product only to the Elation Professional factory All shipping charges must be pre paid If the requested repairs or service including parts replacement are within the terms of this warranty Elation Professional will pay return shipping charges only to a designated point within the United States If the entire instrument is sent it must be shipped in its original package No accessories should be shipped with the product If any accessories are shipped with the product Elation Professional shall have no liability what so ever for loss of or damage to any such accessories nor for the safe retur thereof C This warranty is void If the serial number has been altered or removed if the product is modified In any manner which Elation Professional concludes after inspection affects the reliability of the product if the product has been repaired or serviced by anyone other than the Elation Professional factory unless prior written authorization was issued to purchaser by Elation Professional if the product is damaged because not properly maintained as set forth in the instruction manual D This is not a service contract and this warranty does not include maintenance cleaning or periodic check up Du
Download Pdf Manuals
Related Search