CES25 Wireless Stereo Speaker System User Manual
Contents
1. controls Specifications Transmission Mode UHF stereo Carrier Frequency 863 MHz Operation Voltage Transmitter AC DC 8V 200mA Power Adapter Speaker AC DC 9V 1 2A Power Adapter or 6 x AA size Alkaline Batteries not included Frequency Response 40Hz 12KHz Distortion 1 5 S N Ratio 65dB Channel Separation 30dB Operation Distance Up to 100meters in ideal conditions Output Power 2 x 4W RMS Warning Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Further information can be found at www connectedessentials co uk License This Connected Essentials RF product conforms with the European R amp TTE directive for RF systems in harmonized frequency ranges These systems may be sold and operated in the EU and in EFTA countries Operation is not permitted in countries not named The declaration of conformity is available from www connectedessentials co uk WEEE Directive Directive 2002 96 EC OF THE EUROPEAN PARLIAMENT AND COUNCIL OF 27 January 2003 on waste electrical equipment Products that include the WEEE symbol shown below should not be placed in the normal household waste but should be2. onnected Essentials CES25 Wireless Stereo Speaker System User Manual Please read carefully before using this equipment and retain for future use Introduction This wireless speaker system uses latest wireless technology that enables you to enjoy music your audio and TV sound anywhere inside or outside your home You can simply connect the system to almost any audio source such as Radio TV Hi Fi CD MP3 DVD player without complicated wiring or installation You ll be enjoying thrilling lifelike stereo sound in minutes 863 MHz RF technology stereo speaker system giving operating distance up to 100m in ideal conditions with no line of sight limitation Virtually interference free stereo quality sound reproduction Automatic level control and auto ON OFF control Auto tuning speakers will scan for best signal from receiver Contents 2xSpeakers 1x Transmitter 1x AC DC 8V 200mA Power Adaptor for Transmitter 2 x AC DC 9V 1 2A Power Adaptor for Speakers 1 x Audio Cable RCA male to 3 5 mm Stereo male plug 1x Short Y Cord RCA Adapter Cable User s Manual Getting To Know Your Wireless Speakers 1 Transmitter connects to your audio equipment and transmits the audio signal to the speakers e Transmitter E ie Taa O Rear View 1 Power LED Indicator C CHANNEL DCIN 2 Signal LED Indicator AN 3 Audio In _ m aplon 4 Channel Selector n 5 DC In For Transmitter 3 4 5 2 Spea
3. disposed of using the appropriate WEEE disposal facility Those facilities may be advised to you by your local council or organization from which the product s was purchased For the latest information on the WEEE directive please access the following website www environment agency gov uk weee Important Information U BWN PR o0 Please note All the safety and operating instructions should be read before the appliance is operated Retain Instructions The safety and operating instructions should be retained for future reference Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to Follow Instructions All operating and usage instructions should be followed Water and Moisture The appliance should not be used near water for example near a bathtub washbowl kitchen sink washing machine in a wet basement or near a swimming pool Power Sources The appliance should be powered only as described in these operating instructions or as marked on the appliance Do not expose batteries not included to direct sun light or any heat sources Do not leave the unit unattended while in use This electric product is not a toy To avoid risk of fire burns personal injury and electric shock keep out of reach of children 10 Do not use this product for other than its intended use 11 Do not close doors or windows on the product or extension cords as this may damage the w
4. er button on top of each speaker A blue LED light will illuminate when each speaker is switched on T A a To protect the transmitter and ensure low power consumption the transmitter will cut off automatically if there is insufficient audio input from the source Once sufficient signal is restored the speakers will automatically y us switch on bi T 1 d 3 4 Please Note you can use standard alkaline or suitable rechargeable ba Operation 1 Turn on the audio source to which the transmitter is connected with The Signal LED on transmitter will light up If it does not check an audio output is present Select a channel on the transmitter You can switch channels for best performance in your location Press the POWER button on the speaker to turn on the speaker Press the TUNE button to get the best tuning reception for the speakers When the button is pressed frequency tuning starts automatically and it stops when a signal is detected Volume can be increased from the speaker by pressing button or decreased by pressing the button Ml Ml Tuning a Keep a distance of approximately 7 meters between speaker and transmitter and then press the TUNE button for the speakers to find the best reception b If no signal has been detected change the channel at the rear of the transmitter and press the TUNE button once again Note You should now be able you move from room to room without inte
5. ire insulation 12 Electrical ratings of the extension cord must be as high as or higher than the electrical ratings of the product 12 Do not cover the product with cloth paper or any material that is not part of the product when it is in use 14 CAUTION to reduce the risk of fire do not deliberately reposition pins on the plug assembly 15 WARNING Keep unit and power cord out of reach of children 16 ALWAYS switch off the transmitter and speakers at the mains socket when not in use 17 If the speakers are wall mounted check security of fittings before use and from time to time once installed CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE TO PREVENT THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL This lighting flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be a sufficient magnitude to constitute a risk of electric shock to persons This exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance Looking for Spares amp Accessories For a range of spa
6. ker receivers receive audio from the transmitter 6 7 10 11 12 A WX 6 Power On Off 7 Tune 8 Volume Down es t 9 Volume Up cee i 1 10 Battery Door Lock 8 9 BE i 11 Battery Door 12 DC In with rubber Cover 13 Power Signal LED Indicator Keep away from water Setting Up The Transmitter 1 Plug the supplied power adaptor into the DC socket located on the rear of the transmitter 2 Plug the supplied AC power adapter into a wall socket The Power LED will then illuminate Transmitter Rear View TRTA DC 8V200MA Socket Power Adaptor gt 3 The transmitter can now be connected to audio output of a TV Radio CD MP3 player ipod iPhone Smart Phone or DVD players with the cables provided Music Player Transmitter Rear View TV AUDIO Q OUT ABB O QQE S OO i Fi il 3 5mm F to RCA M 3 5mm M to RCA M OF cable adapter aE 4 Once the transmitter detects an audio signal from the source the SIGNAL LED will illuminate Setting Up The Speakers 1 Speakers can be powered by batteries not supplied or the supplied power adapters NB You must have a working audio output source for the transmitter to operate correctly f using batteries insert 6 x AA batteries into each speaker battery compartment f using mains power connect the supplied power adapters to the input socket at the base of each speaker then plug into the wall socket Switch each speaker on by pressing the Pow
7. res and accessories for your product purchase please visit ConnectedEssentials co uk Spares Need Help Online www ConnectedEssentials co uk email suoport connectedessentials co uk
8. rference If interference should occur the signal cuts off or carries distortion press the TUNE button on top of the speaker to maximize best reception The signal from the system will become weaker over longer distances and may break up Remember the maximum range of 100 meters is in ideal conditions Walls furniture and any other obstruction between the transmitter and speaker s will reduce the transmission range Troubleshooting Please ensure you have set up your system using the guidelines in this manual To further help some common problems are also listed below NO SOUND Ensure the AC adapter is fully inserted into the mains plug and the power connection input is in place on both the transmitter and the speakers Ensure the speakers are switched on and the blue LED lights illuminate If using batteries the capacity may be too low replace with new batteries or use the supplied AC adapters Ensure that your connected audio video equipment is switched on and is operational Once the transmitter detects the audio signal the SIGNAL LED will illuminate If in doubt connect the transmitter to an alternative audio source to verify normal operation of the wireless speaker system Ensure the volume of the wireless speakers is set to an appropriate level DISTORTED SOUND Distorted Sound may be caused by one or more of the following Changing the frequency channel change the position of the channel selector
9. switch on the rear of the transmitter and then press the TUNE button on top of each speaker Low battery power if using batteries the capacity may be too low replace the batteries or use the supplied AC adapters Speaker volume is set too high ensure the volume level of the speakers is adjusted properly The input level of the audio signal is too high too low adjust the volume of the audio source equipment Speaker humming if you experience a noticeable hum from the speakers particularly when the audio source equipment is at low volume reposition the transmitter and associated cables to ensure that these are not in close proximity of mains power cables or mobile telephones In some instances the audio source equipment may be the source of this interference If in doubt connect the transmitter to an alternative audio source to verify normal operation of the wireless speaker system OTHER COMMON PROBLEMS Sound cutting out and or signal light on transmitter not illuminating the transmitter requires a minimum signal level from the audio source equipment Increase the volume of the audio source equipment until the SIGNAL LED on the transmitter is constantly illuminated Interference or background hiss this is caused by amplification of a low signal level from the audio source equipment Increase the volume of the audio source equipment whilst reducing the volume setting of both speakers using the speaker volume
Download Pdf Manuals
Related Search