Quick Reference Guide
Contents
1. AUDIO IN RGB DVI 1 8 headphone jack for analog PC audio input USBIN Used for viewing multimedia files RGB IN PC Analog PC Connection Uses a D sub 15 pin cable VGA cable HDMI DVI IN Digital Connection Supports HD video and Digital audio Accepts DVI video using an adapter or HDMI to DVI cable not included AV Audio Video IN Analog composite connection Supports standard definition video only 480i Used for PC DTV audio input jack UPDATE Software downloads and debug mode enable dis able RESET Hardware reset to PTC microcontroller RS 232C IN Used for software updates SERVICE ONLY OPTICAL DIGITAL Connect digital audio to various types of equipment Connect to a Digital Audio Component Use an Optical audio cable ASSEMBLING AND PREPARING 15 Lifting and Moving the TV e When transporting a large TV there should be at least 2 people e When transporting the TV by hand hold the TV as When moving or lifting the TV read the following to shown in the following illustration prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size N CAUTION e Avoid touching the screen at all times as this may result in damage to the screen e When transporting the TV do not expose the TV to jolts or excessive vibration e Itis recommended to move the IV in the box or e When transporting the TV keep the TV upright packing mater2. Remote Control and Intelligent Sensors Power Indicator Off in standby mode Illuminates orange when the set is switched on S e Touch Buttons CHANNEL VOLUME POWER AY Button Buttons Buttons ASSEMBLING AND PREPARING T1 For 42CQ610H Speaker Power Standby Indicator Off in standby mode Illuminates blue when the set is switched on CHANNEL A Vv Buttons VOLUME Buttons ENTER Button O MENU Button INPUT Remote Control Sensor INPUT Button POWER Button O I For 42LQ640H m Z A i n I e Speaker GO Remote Control and Power Indicator Button Description A WV Scrolls through the saved channels do Adjusts the volume level amp Turns the power on or off 12 ASSEMBLING AND PREPARING Rear Jack Panel E Image shown may differ from your TV For 22LQ630H a AUDIO IN SPEAKER CPU SERVICE RGBIDVI OUT 80 SERVICE ONLY eS e 11 Gey bs GANECONTROL TVALINK pre SERVIC IMPI CFG E SERVICE ONLY r ON EN E a ANTENNA IN 14 PILLOW SPEAKER UPDATE RESET e e AVIN O o 8 CO m zZ A E n lt x For 26 32LQ630H AUDIO IN RGBIDVI USB IN 1 CB
3. IMPORTANT SAFETY INSTRUCTIONS 3 e Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the apparatus Si ES e Only use attachments accessories specified by the manufacturer m e Use only with a cart stand tripod bracket or table specified by the manufacturer or sold with the apparatus When a cart is used use caution when moving the cart apparatus combination to avoid injury from tip over 3125A e Unplug this apparatus during lightning storms or when unused for long periods of time e Refer all servicing to qualified service personnel Servicing is required when the apparatus has been damaged in any way such as power supply cord or plug is damaged liquid has been spilled or objects have fallen into the apparatus the apparatus has been exposed to rain or moisture does not operate normally or has been dropped e Do not stick metal objects or any other conductive material into the power cord Do not touch the end of the power cord while it is plugged in e Keep the packing anti moisture material or vinyl packing out of the reach of children Anti moisture material is harmful if swallowed If swallowed by mistake force the patient to vomit and visit the nearest hospital Additionally vinyl packing can cause suffocation Keep it out of the reach of children e CAUTION concerning the Power Cord Can di
4. permanent disfigurement on the screen This is image burn or burn in and not covered by the warranty e If the aspect ratio of the TV is set to 4 3 for a long period of time image burn may occur on the letterboxed area of the screen e Avoid displaying a fixed image on the TV screen for a long period of time 2 or more hours for LCD 1 or more hours for the Plasma TV to prevent image burn For USA and Canada FCC NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and the receiver Connect the equipment to an outlet on a circuit different from that to which the receiver is connected Consul
5. a confined space such as a bookcase Do not cover the product with cloth or other materials while plugged Do not install in excessively dusty places If you smell smoke or other odors coming from the TV unplug the power cord and contact an authorized service center Keep the product away from direct sunlight Never touch this apparatus or antenna during a thunder or lightning storm When mounting a TV on the wall make sure not to install the TV by hanging the power and signal cables on the back of the TV Do not allow an impact shock or any objects to fall into the product and do not drop anything onto the screen Disconnecting the Main Power The power outlet used with this device must remain easily accessible Store the accessories battery etc in a safe location out of the reach of children This apparatus use batteries In your community there might be regulations that require you to dispose of these batteries properly due to environmental considerations Please contact your local authorities for disposal or recycling information Do not dispose of batteries in a fire Do not short circuit disassemble or allow the batteries to overheat IMPORTANT SAFETY INSTRUCTIONS e Dot Defect The Plasma or LCD panel is a high technology product with resolution of two million to six million pixels In a very few cases you could see fine dots on the screen while you re viewing the TV Those dots are deactivated pixels and do
6. not affect the performance and reliability of the TV e Generated Sound Cracking noise A cracking noise that occurs when watching or turning off the TV is generated by plastic thermal contraction due to temperature and humidity This noise is common for products where thermal deformation is required Electrical circuit humming panel buzzing A low level noise is generated from a high speed switching circuit which supplies a large amount of current to operate a product It varies depending on the product This generated sound does not affect the performance and reliability of the product e Take care not to touch the ventilation openings When watching the TV for a long period the ventilation openings may become hot This does not affect the performance of the product or cause defects in the product e If the TV feels cold to the touch there may be a small flicker when it is turned on This is normal there is nothing wrong with TV Some minute dot defects may be visible on the screen appearing as tiny red green or blue spots However they have no adverse effect on the TV s performance Avoid touching the LCD screen or holding your finger s against it for long periods of time Doing so may produce some temporary distortion effects on the screen Preventing Image burn or Burn in on your TV screen e Ifa fixed image displays on the TV screen for a long period of time it will be imprinted and become a
7. seriously injured or there is a possibility of accident or death ZA CAUTION If you ignore the caution message you may be slightly injured or the product may be damaged Q note The note helps you understand and use the product safely Please read the note carefully before using the product WARNING This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling Read these instructions Keep these instructions Heed all warnings Follow all instructions SF Do not use this apparatus near water K Clean only with a dry cloth k Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Do not defeat the safety purpose of the polarized or grounding type plug A polarized plug has two blades with one wider than the other A grounding type plug has two blades and a third grounding prong The wide blade or the third prong are provided for your safety If the provided plug does not fit into your outlet consult an electrician for replacement of the obsolete outlet Can differ by country Do not press strongly upon the panel with a hand or a sharp object such as a nail pencil or pen or make a scratch on it
8. where it can come in contact with such power lines or circuits as death or serious injury can occur Be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges Section 810 of the National Electrical Code NEC in the U S A provides information with respect to proper grounding of the mast and supporting structure grounding of the lead in wire to an antenna discharge unit size of grounding conductors location of antenna discharge unit connection to grounding electrodes and requirements for the grounding electrode Antenna grounding according to the National Electrical Code ANSI NFPA 70 Ground Clamp Fi Antenna Discharge Unit NEC Section 810 20 Grounding Conductor NEC Section 810 21 Electric Service Equipment Ground Clamp e Power Service Grounding Electrode System NEC National Electrical Code NEC Art 250 Part H Cleaning When cleaning unplug the power cord and wipe gently with a soft cloth to prevent scratching Do not spray water or other liquids directly on the TV as electric shock may occur Do not clean with chemicals such as alcohol thinners or benzine Moving Make sure the product is turned off unplugged and all cables have been removed It may take 2 or more people to carry larger TVs Do not press or put stress on the front panel of the TV Ventilation Install your TV where there is proper ventilation Do not install in
9. x 100 200 x 100 Standard screw M4 M4 Number of screws 4 4 Wall mount bracket LSVV100B G optional Model 42CQ610H 42LQ640H VESA 200 x 200 Standard screw M6 Number of screws 4 Wall mount bracket LSW200B G optional ASSEMBLING AND PREPARING 17 A CAUTION Kensington Security System optional e Disconnect the power before moving or installing the TV Otherwise electric shock may occur e If you install the TV on a ceiling or slanted wall it may fall and result in severe injury Use an authorized LG wall mount and contact the The Kensington security system connector is located at the rear of the TV For more information of installation and using refer to the manual provided with the Kensington security local dealer or qualified personnel system or visit http www kensington com e Do not over tighten the screws as this may cause damage to the TV and void your warranty Q NOTE e Use the screws and wall mounts that meet the VESA standard Any damages or injuries by misuse or using an improper accessory are not covered by the warranty e Ensure adequate ventilation by following the clearance recommendations Do not mount near or above any type of heat source e Do not put this product next to the patient s bed where it can be reached by the patient e Install product in such a way that patients will not be able to touch this product e This product shoul
10. 4 RGB IN PC Healthcare Multimedia sem GAME CONTROL IMPI ANTENNA IN PIC SERVICE CPUSERVICE TV LINK SPEAKER OUT SERVICE ONLY SERVICE ONLY CFG koJ 2 AVIN AUDIOVIDEO FASUTTAN DVI IN 1 HEMI 2 6 o PILLOW SPEAKER ASSEMBLING AND PREPARING 13 For 42CQ610H 2 ANTENNA IN 1 USB IN 4 VIDEO MANo A ROO m Z A i n I For 42LQ640H AUDIO IN RGB DVI PTC SERVICE SERVICE ONLY ANTENNA OPTICAL DIGITAL CABLE IN SPEAKER OUT 89 m zZ A E n lt x 14 ASSEMBLING AND PREPARING Jack Description Power Cord Socket For operation with AC power Caution Never attempt to operate the TV on DC power ANTENNA IN Connect over the air signals to this jack CABLE IN PTC SERVICE Used for PTC software updates SERVICE ONLY CPU SERVICE Used for CPU software updates SERVICE ONLY TV LINK CFG Computer input for programming Free To Guest services SPEAKER OUT 8Q For use with external speakers GAME CONTROL Input port for third party game Controllers M P I Allows VOD PPV devices or set top boxes to control the TV PILLOW SPEAKER Used to connect to pillow speaker
11. 7 9 Ibs Current Value Power consumption 0 7A 45W z vones oe 659 0 x 427 8 x 59 0 mm 72 Dimensions W x H x D T 25 9 x 16 8 x 2 3 inch Weight 5 9 kg 13 0 Ibs Current Value Power consumption 0 6 A 60 W 32LQ630H 32LQ630H UA Dimensions W x H x D 787 4 x 501 5 x 61 5 mm 31 0 x 19 7 x 2 4 inch MODELS Dimensions W x H x D Weight 9 0 kg 19 8 Ibs Current Value Power consumption 0 7A 70W 42CQ610H oe 42CQ610H UA Dimensions 1 024 x 621 x 87 1 mm WxHxD 40 3 x 24 4 x 3 4 inch Weight 15 1 kg 33 2 Ibs Current Value Power consumption 1 5A 150W 42LQ640H 42LQ640H UA 991 7 x 604 0 x 55 0 mm 39 0 x 23 7 x 2 1 inch Weight 13 5 kg 29 7 Ibs Current Value Power consumption 1 0 A 100 W GENERAL TROUBLESHOOTING 21 GENERAL TROUBLESHOOTING The software may be updated for improvement in performance The customer is responsible to ensure the compatibility of their equipment with any LG Electronics software If needed please consult with LG Electronics and update new software versions according to the guidance provided by LG Electronics Installation Symptom Possible Cause s Possible Solution s Cannot direct enter channel number e TV in Pass through Mode Installer Menu item 028 CH OVERIDE is set to 0 i e disabled recommended setting e If the channel lineup is locked only channels that
12. INSTALLATION PROCEDURE ASSEMBLING AND PREPARING INSTALLATION PROCEDURE 1 Open the package and make sure all the accessories are included 2 Attach the stand to the TV set 3 Connect an external device to the TV set ASSEMBLING AND PREPARING Unpacking Check your product box for the following items If there are any missing accessories contact the dealer where you purchased your product The illustrations in this manual may differ from the actual product and item For 22 26 32LQ630H m zZ A E n lt x Quick Reference Guide Power Cord A V Adapter Cable For 22 26LQ630H 42LQ640H For 32LQ630H For 26LQ630H 42CQ610H Cable Holder Cable Holder Protective bracket and 1EA 3 EA screw for power cord See p 18 19 See p 18 See p 18 19 For 42LQ640H For 42LQ640H For 42CQ610H ele Power Cord Holder Protection cover Protection cover See p 19 See p 9 See p 9 ASSEMBLING AND PREPARING 9 N CAUTION e Do not use any unapproved items to ensure the safety and product life span e Any damages or injuries by using unapproved items are not covered by the warranty e In case of some model the thin film on screen is a part of TV So don t take it off Q note The items supplied with your product may vary depending on the model e Gently wipe any spots on the cabinet with a polishing cloth included with some models e Product specifications or contents of this manual may be changed without pri
13. LG Life s Good QUICK REFERENCE GUIDE LED TV LCD TV LG LED TV applies LCD screen with LED backlights Please read this quick reference guide carefully before operating your set and retain it for future reference LED TV MODELS 22LQ630H 42LQ640H 26LQ630H 32LQ630H P NO MFL62194634 1309 REVO7 LCD TV MODELS 42CQ610H www gsolutions com 2 IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product m zZ A n lt x RISK OF ELECTRIC SHOCK DO NOT OPEN A WARNING CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER OR BACK NO USER SERVICEABLE PARTS INSIDE REFER TO QUALIFIED SERVICE PERSONNEL The lightning flash with arrowhead symbol Aw an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance servicing instructions in the literature accompanying the appliance WARNING CAUTION TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE A WARNING If you ignore the warning message you may be
14. are active in the TV s channel lineup can be selected Set Installer Menu item 028 CH OVERIDE to 1 to allow access for direct keypad entry to all channels e TV in FTG Mode The channel entered is not part of the FTG Channel Map e Channel access is restricted to channels included in the FTG Channel Map If necessary make changes to the FTG Channel Map using the FTG File Manager or the FTG Configuration Application as appropriate No channels present after setup e Auto Tuning Channel Search not run e Refer to Express Script or Custom Master TV Setup procedure as appropriate Auto Tuning must be run in order for the channel lineup to be populated Note for Express Script You must select Execute Auto Search in the Auto Search screen to run the search To re activate the Express Script set Installer Menu item 117 FACT DEFAULT to 001 Picture Reception and Sound Symptom Possible Cause s Possible Solution s No picture e TV is turned OFF e Turn TV ON e Power failure e Antenna cable not connected e Connect antenna cable signal to TV e Connections incorrect e Check connections on TV e MPI not connected e If applicable connect MPI cable to MPI device e Encrypted program e Try another channel e Wrong tuning band e Adjust Installer Menu settings Normal picture poor or no sound e Broadcast problem e Try a different c
15. d only be mounted on a wall e The Kensington security system is optional You can obtain additional accessories from your local dealer Q note e The wall mount bracket is optional You can obtain additional accessories from your local dealer e Use the screws that are listed in the VESA standard screw specifications e The wall mount kit includes an installation manual and necessary parts e The length of screws may differ depending on the wall mount Make sure to use the proper length e For more information refer to the manual supplied with the wall mount m Z A i n I 18 ASSEMBLING AND PREPARING Tidying Cables For 22LQ630H For 26LQ630H 1 Gather and bind the cables with the cable holder s 1 Connect the cables as necessary on the TV back cover Secure the power cable with the protective bracket and screw as shown It will help prevent the power cable from being removed by accident Cable Holder Protective Bracket and Screw m Z A n I For 32LQ630H 2 Gether and bind the cables with the cable holder s on the TV back cover 1 Gather and bind the cables with the cable holder s on the TV back cover Cable Holder Cable Holder ASSEMBLING AND PREPARING 19 For 42CQ610H 1 Connect the cables as necessary Secure the power cable with the protective bracket and screw as shown It will help prevent the power cable from being r
16. emoved by accident Protective Bracket and Screw This feature is not available for all models 2 Install the cable management clip as shown Cable Management Clip 3 Put the cables inside the cable management clip and snap it closed Ee wn For 42LQ640H 1 Install the power cord holder and power cord It will help prevent the power cable from being removed by accident Power Cord Holder 2 Gather and bind the cables with the cable holder Cable Holder N CAUTION f Do not move the TV by holding the cable holder and power cord holder as the cable holders may break and injuries and damage to the TV may occur m Z A v lt x 20 SPECIFICATIONS SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions Power requirement AC 120 V 50 60 Hz Television System ATSC NTSC M 64 amp 256 QAM Program Coverage VHF 2 13 UHF 14 69 CATV 1 135 DTV 2 69 CADTV 1 135 MODELS External Antenna Impedance 750 Environment Operating Temperature 0 C 40 C 32 F 104 F condition Operating Humidity Less than 80 Storage Temperature 20 C 60 C 4 F 140 F Storage Humidity Less than 85 KE 22 06304 UA Dimensions 526 0 x 352 0 x 54 1 mm WxHxD 20 7 x 13 8 x 2 1 inch Weight 3 6 kg
17. ffer by country It is recommended that appliances be placed upon a dedicated circuit that is a single outlet circuit which powers only that appliance and has no additional outlets or branch circuits Check the specification page of this owner s manual to be certain Do not connect too many appliances to the same AC power outlet as this could result in fire or electric shock Do not overload wall outlets Overloaded wall outlets loose or damaged wall outlets extension cords frayed power cords or damaged or cracked wire insulation are dangerous Any of these conditions could result in electric shock or fire Periodically examine the cord of your appliance and if its appearance indicates damage or deterioration unplug it discontinue use of the appliance and have the cord replaced with an exact replacement part by an authorized service Protect the power cord from physical or mechanical abuse such as being twisted kinked pinched closed in a door or walked upon Pay particular attention to plugs wall outlets and the point where the cord exits the appliance Do not move the TV with the power cord plugged in Do not use a damaged or loose power cord Be sure do grasp the plug when unplugging the power cord Do not pull on the power cord to unplug the TV e Warning To reduce the risk of fire or electrical shock do not expose this product to rain moisture or other liquids Do not touch the TV with wet hands Do not install this
18. h or update Installer Menu as necessary LG The model and serial numbers of the TV are located on the back and or one side of the TV Record them below should you ever need service MODEL SERIAL Pro Centric is a trademark of LG Electronics U S A Inc Pro ldiom is a registered trademark of Zenith Electronics LLC b LAN is a trademark of LodgeNet Interactive Corporation All other trademarks or registered trademarks are the property of their respective owners Life s Good LG Customer Information Center For inquires or comments visit www lg com or call 1 888 865 3026 1 888 542 2623 USA Commercial User CANADA For LQ630H LQ640H series This product qualifies for ENERGY STAR in the p y factory default Home Use setting OW in Changing the factory default settings or enabling other features may increase power consumption that could SERAL exceed the limits necessary to quality for ENERGY STAR
19. hannel e Audio muted e Press MUTE or use Volume Up key to increase sound level e Pillow TV speaker not configured properly e Check that Installer Menu items 020 FEATURE LEVEL and 027 HOSPITAL MODE are set as required Also if applicable select TV Speaker in the Audio Menu Erratic Operation Symptom Possible Cause s Possible Solution s Installer Menu setup e Wrong Installer Menu settings e Adjust Installer Menu settings as required m Z A i n I m zZ A E n lt x 22 GENERAL TROUBLESHOOTING Installer Remote Symptom Possible Cause s Possible Solution s Remote doesn t work e Remote not in TV Mode e Use MODE key to select TV puts remote into TV Mode e Not aimed at IR remote sensor e Point remote at TV s IR receiver on TV e Remote too far from IR sensor e Move remote closer to TV s IR receiver or darken room e MPI not connected e If applicable connect MPI cable to MPI device e IR path to TV s receiver obstructed e Remove obstructions e Weak batteries e Replace batteries e Wrong battery polarity e Check that and match in battery compartment e Too much light in room e Dim room light e Wrong Installer Remote e Requires compatible Installer Remote Contact your LG dealer e Bed Switch set to wrong bed e Set Bed Switc
20. ial that the TV originally came in never turn the TV on its side or tilt towards the left e Before moving or lifting the TV disconnect the or right power cord and all cables e When holding the TV the screen should face away from you to avoid damage Hold the top and bottom of the TV frame firmly Make sure not to hold the transparent part speaker or speaker grill area m Z A i n I m zZ A T n lt x 16 ASSEMBLING AND PREPARING Setting Up the TV Mounting on a Wall An optional wall mount can be used with your LG Television Consult with your local dealer for a wall mount that supports the VESA standard used by your TV model Install the protection cover provided with the TV to protect the area where the TV stand would otherwise be located Press the protection cover into the TV until you hear it click Carefully attach the wall mount bracket at the rear of the TV Install the wall mount bracket on a solid wall perpendicular to the floor If you are attaching the TV to other building materials please contact qualified personnel to install the wall mount Detailed instructions will be included with the wall mount We recommend that you use an LG brand wall mount 10 cm 4 inches Make sure to use screws and wall mounts that meet the VESA standard Standard dimensions for the wall mount kits are described in the following table Model 22 26LQ630H 32LQ630H VESA 100
21. nd other countries ABOUT DIVX VIDEO DivX is a digital video format created by DivX LLC a subsidiary of Rovi Di WX Corporation This is an official DivX Certified device that plays DivX video Visit divx com for HD more information and software tools to convert your files into DivX video ABOUT DIVX VIDEO ON DEMAND This DivX Certified device must be registered in order to play purchased DivX Video on Demand VOD movies To obtain your registration code locate the DivX VOD section in your device setup menu Go to vod divx com for more information on how to complete your registration DivX Certified to play DivX video up to HD 1080p including premium content Divx DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license Covered by one or more of the following U S patents 7 295 673 7 460 668 7 515 710 7 519 274 OPEN SOURCE SOFTWARE NOTICE To obtain the source code under GPL LGPL MPL and other open source licenses that is contained in this product please visit http opensource lge com In addition to the source code all referred license terms warranty disclaimers and copyright notices are available for download LG Electronics will also provide open source code to you on CD ROM for a charge covering the cost of performing such distribution such as the cost of media shipping and handling upon email request to opens
22. or notice due to upgrade of product functions e When using a VGA D sub 15 pin signal cable PC connection use the shielded signal interface cable with a ferrite core to maintain standards compliance for the product e For an optimal connection HDMI cables and USB devices should have bezels less than 10 mm 0 39 inches thick and 18 mm 0 7 inches width e Use an extension cable that supports USB 2 0 if the USB cable or USB memory stick does not fit into your TV s USB port A 310 mm 0 39 inches B 318 mm 0 7 inches m Z A I n lt x Protection Cover E Image shown may differ from your TV For 42CQ610H 42LQ640H Install the included protection cover over the hole for the stand Press the Protection cover into the TV until you hear it click 10 ASSEMBLING AND PREPARING Front Panel Information E Image shown may differ from your TV gd NOTE e If your TV has protection tape attached remove the tape and then wipe the TV with a cloth If a polishing cloth is included with your TV please use it For 22LQ630H Remote Control and Intelligent Sensors Power Indicator Off in standby mode Illuminates orange when the set is Speaker switched on e Touch Buttons m oll ra vy CHA VOL ENTER MENU INPUT E 7 S a T CHANNEL VOLUME ENTER MENU INPUT POWER A Button Button Button Button Buttons Buttons For 26 32LQ630H
23. ource lge com This offer is valid for three 3 years from the date on which you purchased the product TABLE OF CONTENTS T7 TABLE OF CONTENTS 2 IMPORTANT SAFETY INSTRUCTIONS 6 LICENSES 6 OPEN SOURCE SOFTWARE NOTICE 7 TABLE OF CONTENTS 7 Additional Information 8 INSTALLATION PROCEDURE 8 ASSEMBLING AND PREPARING 8 Unpacking 9 Protection Cover 10 Front Panel Information 12 Rear Jack Panel 15 Lifting and Moving the TV 16 Setting Up the TV 16 Mounting on a Wall 17 Kensington Security System optional 18 Tidying Cables 20 SPECIFICATIONS 21 GENERAL TROUBLESHOOTING Additional Information Depending on model The Owner s Manual and Commercial Mode Setup Guide contain detailed information on the advanced features of these TVs To view the extended documentation visit our website at www lgsolutions com products From the Products page select TVs Systems amp Solutions then LCD TVs then the applicable TV Click the Literature amp Downloads tab at the bottom of the TV page and select the required document s from the Downloads list Q note e Image shown may differ from your TV e Your TV s OSD On Screen Display may differ slightly from that shown in this manual e The available menus and options may differ from the input source or product model that you are using e New features may be added to this TV in the future m Z A i n I 8
24. product near flammable objects such as gasoline or candles or expose the TV to direct air conditioning a e Do not expose to dripping or splashing and do not place objects filled with liquids such as vases cups etc on or over the apparatus e g on shelves above the unit m Z A i n I m zZ A E n lt x 4 IMPORTANT SAFETY INSTRUCTIONS e Grounding Except for devices which are not grounded Ensure that you connect the earth ground wire to prevent possible electric shock i e a TV with a three prong grounded AC plug must be connected to a three prong grounded AC outlet If grounding methods are not possible have a qualified electrician install a separate circuit breaker Do not try to ground the unit by connecting it to telephone wires lightening rods or gas pipes Power Supply Short circuit Breaker e As long as this unit is connected to the AC wall outlet it is not disconnected from the AC power source even if the unit is turned off e Do not attempt to modify this product in any way without written authorization from LG Electronics Unauthorized modification could void the user s authority to operate this product e Outdoor Antenna Grounding Can differ by country If an outdoor antenna is installed follow the precautions below An outdoor antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits or
25. t the dealer or an experienced radio TV technician for help This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation of the device Any changes or modifications in construction of this device which are not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment NOTE TO CABLE TV INSTALLER This reminder is provided to call the CATV system installer s attention to Article 820 40 of the National Electric Code U S A The code provides guidelines for proper grounding and in particular specifies that the cable ground shall be connected to the grounding system of the building as close to the point of the cable entry as practical m Z A i n I m Z A E n T 6 LICENSES OPEN SOURCE SOFTWARE NOTICE LICENSES Supported licenses may differ by model For more information about licenses visit www lg com DE DOLBY Manufactured under license from Dolby Laboratories Dolby and the double D symbol are trademarks of Dolby Laboratories DIGITAL The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI logo are EAO MGIOREGA Wiceenee trademarks or registered trademarks of HDMI Licensing LLC in the United States a
Download Pdf Manuals
Related Search