USER MANUAL AR-1804 Large Blue LED
Contents
1. Hour digit is blink 5 Press TUNING to set hour 6 Press TUNING to set minute 7 Press TIME SET again to confirm setting or the setting will be confirmed automatically if no button is used within 3 seconds LISTEN TO FM RADIO For better reception fully extend and adjust the position of the FM antenna wire 1 Press the FUNCTION to turn on FM radio gt FM frequency is displayed and FM indicator is light up 2 Press the SCAN TUNING for two seconds gt The FM Tuner tunes to a station with strong reception automatically To search for a radio station manually Press the TUNING repeatedly to tune to a radio station STORE FM RADIO STATIONS You can store up to 20 FM radio stations in preset channel automatically or manually STORE FM RADIO STATIONS AUTOMATICALLY AUTO SCAN 1 Press the FUNCTION to turn on FM radio 2 Press the SCAN for two seconds gt The received stations are automatically stored to preset numbers STORE FM RADIO STATIONS MANUALLY 1 Tune to an FM radio station 2 Press the MEMORY TIME SET to activate the storing mode 3 Press the TUNING to select the preset number 4 Press the MEMORY TIME SET again to store the radio station gt P 01 P 20 is preset station numbers gt If this position is occupied the previous stored frequency will be displayed gt To remove a pre stored FM radio station store another station in its place LISTEN TOA PRESET FM RADIO S2. B power adaptor not included using the included USB cable USB CHARGING Use the USB charging port to charge your smartphone or to power USB powered devices such as a USB type lamp or fan To Connect your Cell phone for charging Use a USB cable not included to connect your cell phone to the USB connector or the unit Your cell phone should start charging Note Charging function may not be supported for all phones or electronic devices BATTERY BACKUP The battery compartment for 2 x 1 5 volt LR6 UM 3 AA batteries is located at the base of the unit for temporary time storage if the unit is not receiving power from the DC input In the event of a power interruption the last time displayed on the clock will be stored in memory due to the battery the clock will not display This feature enables you to move the set from place to place without re setting the clock every time The battery back up system is only meant to be used from short temporary power interruption For longer durations the battery may become exhausted or there may be some deviation in accuracy When the battery is exhausted it should be removed from the set to prevent leakage If you do not wish to take advantage of the battery back up system your set will work normally without a battery However if disconnected from the mains the clock figures will flash when the mains are re connected and you must re set the clock again
3. DICATOR 2 DIMMER SLEEP SCAN 10 PM INDICATOR 3 VOLUME AL2 11 BLUE TOOTH INDICATOR 4 VOLUME AL1 12 AL2 INDICATOR 5 SNOOZE NIGHT LIGHT 13 SLEEP INDICATOR 6 FUNCTION 14 DIGITAL DISPLAY 7 TUNING DOWN HOUR SKIP BACKWARD 15 DC INPUT 8 TUNING UP MINUTE SKIP FORWARD 16 USB OUTPUT 5V 1A SPECIFICATIONS Speakers Bluetooth Wireless Technology LED Display Night Light Colour FM Radio Dimmer Settings Alarm Settings USB Output Battery Backup Dimensions 17 FMANTENNA WIRE 2 x 2WRMS Stereo Output Version 2 1 30mm 1 2 height White PLL with 20 Memory Pre Sets High Low Buzzer or Radio and Sleep Snooze Functions 5VDC 1A Requires 2 x AA Batteries 201 L x 111 D x 80 H mm CONNECT POWER CAUTION Risk of product damage Ensure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio Risk of electric shock When you unplug the AC adaptor always pull the plug from the socket Never pull the cord BATTERY BACKUP The battery compartment for 2 x 1 5 volt LR6 UM 3 AA batteries is located at the base of the unit for temporary time storage if the unit is not receiving power from the DC input SET TIME 1 Press and hold TIME SET for two seconds 2 The unit is preset to display in 24 hour mode 3 Press TUNING to select 24 or 12 hour mode 4 Press TIME SET to confirm 24 or 12 hour mode gt 0 00 Hour digit is blink or 12 00
4. TATION 1 In FM mode press MEMORY TIME SET to select a preset number 2 Press the TUNING to select preset station Note The digit display return to clock display if no buttons is pressed for 10 seconds LISTEN TO BLUETOOTH WIRELESS MUSIC STREAMING Press FUNCTION to enter Bluetooth mode bt displays on the screen Bluetooth indicator flashes quickly to wait for Bluetooth enabled device smartphone to pair it Enter the Bluetooth devices screen of your Bluetooth enabled device smartphone Scan and search for AR1804 as device name Select AR1804 on device name list The Bluetooth indicator will flash slowly after pairing and connecting Playback music or multi media audio source at the devices smartphone O ON oO oS oO NS Press Volume or adjust volume level at the devices smartphone to desire level 4 oO Press Backward skip to select previous song 11 Press Forward skip to select next song 12 Press Play Pause to play or pause the song that is being played back Note The digit display returns to clock display if no buttons is pressed for 10 seconds SET ALARM TIMER Make sure that you have set the clock correctly You can set two separate alarm timers For the alarm sound you can select the FM radio or the buzzer 1 2 Press SCAN to Clock mode Press and hold AL1 AL2 for two seconds gt 0 00 Hour digit is blink Press TUNING to set the alarm hour and TUNING
5. USER MANUAL AR 1804 Large Blue LED Display Clock Radio With Bluetooth Wireless Technology Distributed by TechBrands by Electus Distribution Pty Ltd 320 Victoria Rd Rydalmere NSW 2116 Australia Ph 1300 738 555 Int l 61 2 8832 3200 Fax 1300 738 500 www techbrands com IMPORTANT Read these instructions Heed all warnings Follow allinstructions Do not block any ventilation openings Install in accordance with the manufacturer s instructions Do not install near any heat sources such as radiators heat registers stoves or other apparatus including amplifiers that produce heat Protect the power cord from being walked on or pinched particularly at plugs convenience receptacles and the point where they exit from the clock radio Only use attachments accessories specified by the manufacturer Unplug this clock radio during lightning storms or when unused for long periods of time Refer all servicing to qualified service personnel Servicing is required when the clock radio has been damaged in any way suchas power supply cord or plug is damaged liquid has been spilled or objects have fallen into the clock radio the clock radio has been expose to rain or moisture does not operate normally or has been dropped This clock radio shall not be exposed to dripping or splashing Do not place any sources of danger on the clock radio e g liquid filled objects lighted candles Attention should be drawn to
6. the environmental aspects of battery disposal Don t throw used batteries in dustbin Please contact your retailer in order to protect the environment Minimum distances around the apparatus for sufficient ventilations exact distance of e g 5 cm should be mentioned The ventilation should not be impeded by covering the ventilation openings with items such as newspaper table cloths curtains etc No naked flame sources such as lighted candles should be placed on the apparatus The use of apparatus in tropical and or moderate climates Attention for adaptor a The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids such as vases shall be placed on apparatus To be completely disconnection the power input the AC DC adaptor of apparatus shall be disconnected from the mains The AC DC adaptor of apparatus should not be obstructed OR should be easily accessed during intended use d The marking information is located at the bottom of apparatus e Battery shall not be exposed to excessive heat such as sunshine fire or the like Electrical products should not be disposed of with household waste Please recycle where facilities exist Check with your Local Authority for recycling options Ensure that batteries or battery packs are not exposed to excessive heat such as sunshine fire or the like Product Flyout 1 TIME SET MEMORY PLAY PAUSE 9 AL1 IN
7. to set the alarm minute Press AL1 AL2 to confirm setting Press AL1 AL2 again to select a sound source FM or BUZZER gt The current FM radio frequency is blink if FM radio source is selected and AL1 AL2 indicator is light up gt bb is blink if the buzzer sound is selected and AL1 AL2 indicator is light up gt Press AL1 AL2 to off alarm function and AL1 AL2 indicator is off gt Press TIME SET to confirm setting or the setting will be confirmed automatically if no button is used within 3 seconds SNOOZE NIGHT LIGHT ON OFF 1 When alarm sounds press SNOOZE to activate the snooze time 9 minutes gt TheAL1 AL2 indicator keeps blinking 2 Press Snooze Night Light button to on and off the Night Light except during alarm sounds SETSLEEP TIMER Press SCAN to radio mode Press SNOOZE DIMMER SLEEP multi function button repeatedly to select the sleep timer period in minutes gt When the sleep timer is activated Sleep indicator is light on To deactivate the sleep timer press SNOOZE DIMMER SLEEP multi function button repeatedly until back to radio frequency Sleep Timer period cycle as follow a 120 gt 90 gt 60 gt 45 gt 30 gt 15 gt 05 OFF ADJUST VOLUME While listening press VOLUME to adjust volume ADJUST DISPLAY BRIGHTNESS Press and hold DIMMER for 2 seconds repeatedly to select high or low brightness levels Plug the unit into the USB port on your computer or into a US
Download Pdf Manuals
Related Search