TN-2008ΜΒ User Manual
Contents
1. Number Icon Description Number Icon Description oe eee 2 a 2 MENU Menu Key 9 ENTER Enter Key 3 O PTZ pias ple 10 lt lt Fast Play Key 4 ESC Exit Key 11 QUAD Quad Key 5 A Up 12 gt Play Key 6 lt Left 13 ll Pause Key 7 v Down 14 REC Record Key 6 2 2 16ch DVR Remote Control Description Number Icon Description Number Icon Description 1 REC Record Key 13 laa Last Section 2 Power On Off Key 14 gt PLAY Video Playback H Window Devide Key 15 gt Frame Forward Frame Forward Key 4 HH Window Devide Key 16 A Up 5 EN jit dae 17 v Down 6 arya D Device Code Key 18 lt Left 7 PTZ PTZ Control Key 19 gt Right 8 II Playback Pause Key 20 gl Enter Key 9 OSD Menu Key 21 ESC Exit Key 10 gt P Next Section 22 MENU Menu Key 11 gt gt Fast Forward Key 23 1 16 Channel 1 16 12 lt lt Fast Backward Key Note When there are multiple devices in a same place the remote control 37 NVR User Manual should choose a device first according to the device number Therefore you should define one unique device number for each machine otherwise the remote control operation may simultaneously affect the multiple devices which are with the same device number 6 2 3 Remote Control Battery 1 Open the battery cover of the remote control 2 Put into 2 pieces of No 7 batteries Make sure that the positive and negative polarity correspond wit2. 1 oor W PD N Email Address Input the email address Password Input the email password Pwd Confirm Confirm the password Receiver Input the email address and user name of the receiver Interval Select the interval of sending email SMTP Server Input the SMTP server address Port Input the SMTP server port 3 3 4 4 Alarm amp Exception Alarm Input Setup alarm input 1 2 3 Alarm Schedule Set the time intervals of alarm Llinkage Select the way of linkage PTZ linkage select the channel number and the action for linkage preset patrol pattern to the specified point and click ok Copy Copy the configuration to the other channels Alarm Output Setup alarm output 1 2 Alarm Schedule Set the time intervals of alarm Llinkage Select the way of linkage Exception Setup abnormality 18 NVR User Manual 1 HDD Full When there is no space in the HDD it can trigger corresponding linkage type 2 Disk Fault When there is HDD read and write fault alarm it can trigger corresponding linkage type 3 Network Broken When there is network broken alarm it can trigger corresponding linkage type 4 IP Address Conflict When there is network IP conflict alarm it can trigger corresponding linkage type 5 Illegal Access When there is illegal access alarm it can trigger corresponding linkage type 6 Video Output Standard Mismatch When the input and output f
3. Function Button Name Function Description Connect and Program connects the device and start Play to play the video Set IP address of the DVR or DDNS Setting port user name password and device name Disconnect Program disconnects the video Select Channel Select to play the video of any channel of the device PTZ Control Control PTZ up down left and right Zoom Zoom in and zoom out Focal Length Increase or decrease the focal length Iris Increase or decrease the iris Capture the current image the pictures Le Snapshot are saved in the picture directory of the mobile phone by default 32 NVR User Manual 3 Use for the first time or need to modify the parameters please click Username Password Ba button to enter the Server Port parameter setting interface as shown i Notes MyDVR in the below picture Username The same as the user name on IE Password The same as the password on Auto Connect IE Server The public IP address or DDNS of the DVR Port The server port of the DVR Notes The description of the DVR which is used to differentiate different devices Setting 4 After successful setting press OK button to enter the connection interface The image will appear if connected successfully 5 7 iphone Mobile System Mobile client supports iphone system version iOS 3 0 or higher version includ
4. OSD of the specified channel Display Parameters Can set the brightness contrast saturation and hue for the specified channel Video Format There are PAL and NTSC for selection Copy To Copy the configuration parameters to other channels Video Parameters The setting parameters of every channel can be modified 1 OU O Encoding Type Main Stream Normal Sub Stream Main Stream Event for selection Stream Type Video Video amp Audio for selection Resolution There are CIF 4CIF 2CIF etc for selection Bitrate Type Constant and Variable for selection Frame Rate Select different value from the drop down list the default value is Full Frame Video Quality Select different image quality as needed it is default to Highest 14 NVR User Manual 7 Copy To Copy the configuration parameters to other channels Schedule Record You can set different types of record plan for each channel 1 Enable Recording Tick the small box before Enable Recording will start recording 2 All Day Recording Tick the small box before All Day Recording to start all day recording then you can select schedule recording motion recording alarm recording command recording etc 3 Record Time You can setup by 8 separate time periods 4 Advanced Settings You can set the prerecord time and post record time 5 Copy To Copy the configuration parameters to other channels Motion Detection The pa
5. USB storage device into the DVR click Browse to find the upgrade file and click Upgrade Auto Reboot You can select every day every week once and disable to maintain the system Stream Info You can view the main stream and sub stream of each channel 20 NVR User Manual 3 3 4 8 Device Log E Device Parameters Main Type of Log All Type Channel Parameters Network Parameters Sub Type Alarm amp Exception Account Parameters From 2011 12 22 0 00 00 ba Search HDD Settings 2011 12 22 23 59 59 Default You can search the logs according to different types and different date and time as shown in the above picture 1 3 4 5 Main Type of Log There are All Type Alarm Exception and Operation for selection Sub Type According to different main types there are corresponding sub types for selection From You can select the start time of a log you want to search To You can select the end time of a log you want to search Export You can export the log you have searched 3 3 5 Playback Click i and will show the below interface 21 NVR User Manual Search Select and tick the channel which you want to search the recording and it will auto search the recording which meet the search condition as shown in the below picture 1 2 Stop Stop the playing video Slow Slow down the playback speed there are 1 2 1 4 1 8 1 16 times Fast Accelerate playba
6. is connected with electricity To ensure the integrity of the recording data please replace the hard disk when it is damaged there is disk error record in the log information Note gt gt gt gt The user manual is for reference only The real object is the standard The products will be updated at any time It is subject to update without notice Please contact our technical department for the latest programs and additional documentation If there is any doubt or dispute our company reserves the right of final explanation This user manual offer references to multi series products The specific eS NVR User Manual operation of each product will not be listed one by one Please contact our technical department when you have any question Contents 1 Product INStrUCTION mrar ee edap iepa Petra kaa KAA E aandar NA aRU aratai k iiin 3 2 Installation Instruction 2 2 cece ee eeeeeeeeeeeeeeeeeeeeaeeeeeeaaeeeeneaaeeeeseaaeeeeneaas 3 2 1 Open case INSPECTION ccecceeececeee eset eeeeeeeeeeeeseaeeesaeeeeeeeesaes 3 2 2 HDD Installation a aa sarin cache eh be seta 3 2 3 Front Panel and Rear Panel Instruction cece eee 3 3 Local Operation Guide ceecceceeeeeeeceeeeeeeeeeeaeeeeaeeceeeesaeeesaeeseeeeeaas 4 3 1 Start Shutdown System ccccceecceceeeeeeeeeeeeeeceeeeeseaeeeeneeseeeeesaees 4 2 2 SYSLOM LOG IM sire siseece Gaara c cee aileron eat us sce a 4 3 3 Menu OperatiOn cccccccc
7. picture directory of the mobile phone by default Setii Set IP address of the DVR or DDNS port user 9 name password and device name Next Group Can select the channel of next group D Exit Exit the program 1 2 3 4 al Full Screen Full screen view 3 Use for the first time or need to modify the parameters please click Setting button to enter the parameter setting interface which as shown in the below picture IP The public IP address or DDNS of the DVR Port The server port of the DVR User Name The same as the user name on IE Password The same as the password on IE Allias Give a name to the device and it will appear on the playing page Select to play the video of any channel of the device Coordinating with the Next Group you can switch to 8ch or 16ch Select Channel PTZ Control Control PTZ up down left and right Zoom in and zoom out increase and decrease focal length and iris The above prompting bar will prompt the function of the selected button Zoom Focal Length Iris NVR User Manual 5 6 Windows Mobile System Mobile client supports windows system version above 2003 It only supports screen touch version currently 1 Copy the MEYE_WM cab to the mobile and install it 2 Click the corresponding program icon to Q open as shown in the picture on the right The functions of the buttons are as below
8. remote address of the DVR matches the address of the remote control gt PTZ cannot control Possible causes 1 Incorrect cable connection of the RS 485 port A B ports are connected oppositely 2 Incorrect settings of PTZ decoder type protocol baud rate and address bit 3 The quantity of the PTZ connected to the RS 485 bus is relatively big which causes the signal reflection and you need to parallel connect a 1200 electrical resistance in the far end 4 The RS 485 port of the main board is defective gt The preview image of the DVR is scratched Possible causes Video input format is not matched If the camera is with NTSC format but the DVR is with PAL format the preview image will be scratched gt DVR playback image is scratched or not able to search the recording 42 NVR User Manual Possible causes 1 Program error please try to reboot the DVR 2 HDD data error caused by bad track and bad clusters please detect the HDD If the HDD is defective please change the HDD 3 Hardware error of DVR please contact the supplier gt DVR cannot connect network Possible causes 1 Please check if the network physical connection is correct or not 2 Please check the DVR network parameter configuration 3 Please check if IP conflict exists in the network gt The download or backup video cannot play normally Possible causes 1 Player is not installed correctly 2 The file system error
9. 480 320 including model 8900 9000 9700 9630 and so on 5 4 1 Installation and Operation Instruction 1 1 Install the vMEye cod and vMEye alx packages into the Blackberry mobile through the Desktop Manager Click option on the mobile desk then click application to find the vMEye and then enter Click Edit Permission and set allow for all permissions Some of the permissions cannot be set allow the option is grey and cannot be modified and can be ignored and click save directly 2 2 Click vMEye icon to run the program then enter the initialized interface through a initialized splash interface which is shown as below picture a aR 2 03 am settings Devices Info jii Port Setting DVR Title MyDVR port User ID user a UserID user Network Type WIFI Y Password sss 28 NVR User Manual Name The device name of the DVR which is used to differentiate different devices Address The public IP address or DDNS of the DVR Port The server port of the DVR User ID The same as the user name on IE Password The same as the password on IE Network Type Select the network type you want to use 3 Click Login to enter the main interface Mav SAVRA 29 NVR User Manual The functions of the buttons are as below Function na Button Name Function Description Program connects the device and start to play Play the video Full Screen Fu
10. Ate aie ee 26 5 3 Android Mobile System c ccccccceseeeeeeeeeeeeeeeceaeeeseaeeneneeenaees 26 5 4 Blackberry Mobile System ccccccceeeeeeeeceeeeeseaeeeseaeeeeeeeesaees 28 5 5 Symbian Mobile SystOm ccccccccccceeeeeeseeceeeeeseeeeseaeeseeeesaees 30 5 6 Windows Mobile System ccccccceeeeeeeceeeeeseeeeeesaeeseeeenaees 32 5 7 iphone Mobile SyStem cccceceeeceseeeeeeneeceeeeeseaeeeeeaeeseneeeeaees 33 GADPENOIK ac ete ta a a ae etek Cee at ein cel attenuates 35 6 1 HDD Capacity Calculation Method for Reference 0 35 6 2 Remote Control Instruction cccceceeeeeseceeeeneeeeeeeeseaeeesnaeeeeneeeeaees 37 2 NVR User Manual 6 3 Technical Datas otia aa e a aa aaa aa 42 6 4 Common Problems Resolution 0 c cccccceeeeeeeeeeeeseeaeeeeeeeeees 42 1 Product Instruction 1 1 Product Summary This device is a video coding and recording product specially designed for the video monitoring field combining with H 264 video compression large capacity HDD storage TCP IP network embedded Linux operating system and other various advanced electronic information technologies realizing high quality image and low bit rate recording features and favourable system stability The device meets the standard of GB 20815 2006 Video Security Surveillance Digital Video Device issued by the government This device has multiple functions including recording playback and monitor
11. NVR User Manual Preface Attentions A A A Welcome to use our digital video recorder For your secure using please read this user manual carefully The following contents are about the proper use of the product the prevention of danger and loss of property etc Please be sure to abide gt gt Do not touch the power switch and the DVR by wet hands or wet objects in order to avoid electric shock After installing the host please make sure that the host and the chassis are connected to the ground in order to avoid video and audio signal interference and damaged by static electricity Ensure the voltage stability of the power supply of the DVR Use the power input with stable voltage value and little wave interference rather than shutdown the DVR by disconnecting the main switch directly Do not drop any liquid or metal on the DVR in case short circuit inside or fire The device does not include any hard disk and you need to properly install the hard disk before using it otherwise you cannot record and playback the video The dust on the mainboard will cause short circuit when it is damp In order to ensure the long term normal working you should regularly dedust the mainboard connectors chassis fan and so on by a brush Do not disconnect the power switch directly when you want to shutdown the DVR You should use the shutdown button on the panel in order to avoid damage to the hard disk Do not open the device when it
12. The backup files in the external storage device and the snapshot pictures will be displayed in the document list bar 24 NVR User Manual 4 Network Operating Instruction 4 1 WEB Browser Operating Instruction 4 1 1 Network Connection v v Confirm the DVR correct access to the network Set the IP address subnet mask and gateway for the computer server and DVR Please allocate IP address in the same network segment if there is no router device in the network If there is router device you just need to set corresponding gateway and subnet mask For the network setting please refer to Settings gt Network Parameters Please make sure that the IP address setting is correct When the IP address setting is complete you can use the system own ping tool to check if the DVR is connected to the network correctly 4 1 2 AtciveX Conirol Installation and User Login and Logout v v When the DVR accesses to the network correctly you can login and visit it through IE browser You can download and install IE ActiveX from DVR through the Internet Then input the IP address of the DVR in the IE browser port number 5050 user name and password then the below interface will pop up More detail Network operation ways please goes to the Host Side 25 NVR User Manual 5 Mobile View Operation Guide This operation guide is about how to install and use the mobile softwares in the mobile phones with Android Blackberry
13. ace which as shown in the below picture Server Info Alias The name of the DVR which is used to ae TEE differentiate different devices g Address 9 174 194 143 Address The public IP address or DDNS of the DVR Port 6003 Port The server port of the DVR pees User ID The same as the user name on IE User ID Admin Password The same as the password on IE Password eeeceee Return button 6 Appendix 6 1 HDD Capacity Calculation Method for Reference Install the digital video recorder for the first time please make sure whether the HDD is installed inside the host 6 1 1 The Capacity of the HDD The digital video recorder requires a single HDD with above 500GB capacity In order to obtain better stability we recommend the HDD with 500G 2TB capacity 6 1 2 The Selection of the Total Capacity Calculate the total capacity of a DVR requires according to the recording requirement recording type recording file storage time Calculation method Step 1 Calculate the storage capacity g of a channel requires per hour according to the formula 1 Unit MByte q d 8 X 3600 1024 1 The Recording File The Recording File Bit Stream Size Size in One Hour Size in One Day 35 NVR User Manual 256K 112M 2 6G 320K 140M 3 3G 512K 225M 5 3G 768K 337M 7 9G 1 00M 439M 10 3G 1 50M 659M 15 4G 2 00M 878M 20 6G d bit rate Unit Kbit s The following table
14. ble the record function Notice Please use the DVR matching power supply instead of any other power supply of any other type or brand 3 1 2 Shutdown System Click click Shutdown Note this method is suggested when shutdown device in order to avoid damage to the device from electricity cut off by accident Notice Before changing the HDD operation you should shutdown the device and cut the power supply first and then operate 3 1 3 Power Failure Recovery When the DVR is under the recording status if the system power is cut off or the device is shut down forcefully after reconnected with the power supply the DVR will auto save the video before cutting and auto recover to the previous status and continue to work 3 2 System Login i i i After normal booting single click or press the OK key on the remote control to pop up the login dialog box user input the user name Admin and 4 NVR User Manual password 888888 default login password in the input box 3 3 Menu Operation When the user logins the system successfully click the right mouse button Configure PITZ Record Capture Playback Display Setting Backup Alarm ER BIOI MEIE G File Manager Remote Setting 4 Screen Preparation before configuration before configure the IP channel please make sure that the IP device has been connected with the network of the NVR and the IP device is in the same network section as the NVR 3 3 1 Config
15. ck there are 2 4 8 16 times Snapshot You can snapshot in any playback channel Backup You can backup the recording of any channel Insert USB storage device click Refresh to detect the USB device If the USB device is recognized normally it will be displayed in the list then select the channel start time and end time click Start and the system will auto start backup and show the progress 3 3 6 Record Backup a Click H and below interface will show 22 NVR User Manual Insert USB storage device click Refresh to detect the USB device If the USB device is recognized normally it will be displayed in the list then select the channel start time and end time click Start and the system will auto start backup and show oot ae E the progress 3 3 7 Manual Record Click and the interface on the right will show Manual the priority is the highest No matter which status each channel is under after carrying out Manual button all the corresponding channels will start regular recording 3 3 8 Alarm Information oe Click and the interface on the right will show All the alarm information of the device is recorded in the Alarm list Clear Alarm Be NVR User Manual 3 3 9 Snapshot Single click on the preview channel click Snapshot you can snapshot on any preview channel 3 3 10 File Manager Click r and the below interface will show
16. eceeceeceeeeeceeeeeeeaeeeeeeeseeeeeseaeeesaeseeeeeesaees 5 B Osl olalt Set ps e a a a S 11 3 3 2 Display Setup eesseeseeeeeeesessseessrssersssrsssnnornnssnnesnnsennees 12 CSE PTZ SetU D a ER 12 3 3 4 System Setting eecccceeececeeeeeeseeeseeeceeeeessaeeeeaesseeeesees 13 3 3 4 1 Device Parameters ceceeeseeeeeetteeeeeteteeeeees 14 3 3 4 2 Channel Parameters cccccceeeeeeseeeeeteeeeeeeeees 14 3 3 4 3 Network Parameters ccceceeeeeeeeeeetteeeeeeeteeeeees 16 3 3 4 4 AlarmM amp EXCeptiOn eee ee eeneeeeeneeeeeeeteeeeeeneeeeee 18 3 3 4 5 Account Parameters 19 3 3 4 6 HDD Settings 2 ece eee cceeeeeeeeeeeeeeeeeeeeeaeeeeeeeees 20 3 3 4 7 System Management erene 20 3 3 4 8 Device LOG rocs ni iina ia 21 3 39 Playpack soient aA A a N T a 21 3 3 6 Record BaCk psnunenirscaiihieinan i aa 22 3 3 7 Manual Record assssasssseessrnesssrnesrsrnesrnnnnernnnesrennesnnnnennnnns 23 3 3 8 Alarm Information ssssseeeeeeeeeesereserresrrrrssrrrrnsrrrrssrnens 23 33 9 Sa pSN Otis ainni iia a eet 24 geI File Maraga iaai ea E EE AS 24 4 Network Operating Instruction 00 c ccceecceceeeeeeeeeeeeeeeeeeeeeeaeeeeaeeeeeeees 25 5 Mobile View Operation Guide ccccccccceeeeeneeeeeeeeseeeeeeeaeeeeeeseeeees 26 5 1 Client Software Obtaining ccccccceeeeeeeeceeeeeseeeessaeeeeeeesaees 26 5 2 The Parameter Settings of the DVR which Supports Mobile Surveillance ARE ete te Eh A he coed te Make UO Aan cs
17. h each other rightly 3 Close the battery cover 6 2 4 Code Corresponding Operation of the Remote Control Press the STATUS DE ED button on the remote control then input the DVR device number default device number is 255 It can be modified under Management ToolsSystem Parameter The maximum device number which can be set is 255 Input the 3 digit device number on the remote control adding 0 in front if the number is not up to 3 digit n press the ENTER button After completing the code corresponding operation you can operate the DVR according to the functions on the remote control 6 2 5 Turn on by Remote Control When the device is under the status of being selected by the remote control keep pressing PQ button on the remote control can turn off the device so that it will be under standby mode When the device is under the standby mode status of being selected flicking on the PONVE button can turn on the device and enter normal working condition 6 2 6 Disable Remote Control Operation When the device is under the status of being selected by the remote control press the DE GED button and the remote control will terminate the control on the DVR 6 2 7 Abnormity Check of Remote Control gt Check the positive and negative polarity of the batteries gt Check whether the power of the batteries has run out gt Check whether the remote control sensor is blocked gt Check whether there is fluorescent ligh
18. he access number of the China Unicom is 99 APN address is 3GNET b The access number of the China Telecom is 777 APN address is blank c The access number of the China Mobile is 99 1 APN address is blank Click OK and the WAN IP will appear in the IP address bar 12 Advance DNS Server Address1 The IP address of the DNS server DNS Server Address2 The standby IP address of the DNS server Alarm Host IP Enter the IP address of the alarm host Alarm Host Port Enter the port of the alarm host Enable PPPOE you can enable the PPPOE service v input the PPPOE user name VV VV WV v input the dynamic address of the device y confirm password DDNS Settings Through the DDNS server there should be a PC with fixed IP address on the internet and run this DDNS server on this PC 7 NVR User Manual 1 2 a A Ww O 7 Select DDNS server type There are lp Server Dyndns Peanuthull for selection Input the server name Input the port Input the user name Input the password Confirm the password Input the standby domain name NTP Settings Enable NTP timing Server Address Input the IP of the NTP server NTP Port This SNTP only supports TCP transmission It is default to 123 Synchronize every Input the time interval needed to be adjusted Select Time Zone Select the time zone of different places GMT You can do fine adjustment of time Email Settings Setup E mail
19. in amp press the buttons on the front panel or press the MENU key on the remote control to enter the menu interface The menu consists of start display PTZ configuration playback backup manual record snapshot and document The device enters the real time monitoring screen after normal booting There are superposed date time the channel name of every channel Icons of record 3D positioning and alarm status will appear in the right upper corner 3 3 1 Start Setup WN Click and the interface will display e mieten 1 Shutdown Click Shutdown button the device B Log will shutdown T Lock 2 Reboot Click Reboot button the device will reboot st1 NVR User Manual 3 Logout Click Logout button the device will logout 4 Lock Click Lock the menu will be locked 3 3 2 Display Setup Click the interface on the right will show Screen Type 1 Language Different languages for selection For example Simplified Chinese Traditional Chinese and English 2 Skin There are original version and blue for selection 3 Screen mode Select different screen modes 4 Rotation Interval Setup the time interval of rotation Tick Enable SEQ to start rotation Note the rotation function can only be enabled under 1 screen 3 3 3 PTZ Setup Click will show the below interface 3 3 3 1 PTZ Control Before starting the PTZ control please firstly confirm the PTZ pa
20. ing simultaneously realizing synchronous video and audio with advanced control technology and powerful network data transmission ability 1 2 Main Functions The following functional characteristics will be different due to the different series of products and their different hardware versions e Real time Monitoring e Camera Control e Compression Processing e Alarm Management and Control Function e Communication Port e Recording Function e Network Function e Video Playback and Backup 2 Installation Instruction 2 1 Open case Inspection When you receive the product please check all the things according to the DVR packing list in the box 2 2 HDD Installation Installation Preparation Need one cross screwdriver This series of HDD DVR can install 2 to 8 pieces of HDD inside and the capacity of each HDD can be up to 2TB NVR User Manual HDD Installation Steps e Twist off the screws on the side panel of the case and then open the cover of the chassis e Fix the HDD on the HDD screw whole sites of the baseboard with screws e Connect the HDD data cable and power cable e Cover the case fix it with screws 3 Local Operation Guide 3 1 Start Shutdown System 3 1 1 Start System Plug power cable press power switch the power led will be on and the DVR will start After booting the video output default to multi window output mode If the booting time is within the record setting time period the system will auto ena
21. ing iPhone iPod touch and so on Installation and Operation Instruction 1 Run the App Store of iphone switch to search page input vMEye in the search bar and find the application program package click install After finish installation the program icons will appear as shown in the below picture ee ee NVR User Manual bk eS 2 Click vMEye icon the above initialized interface will appear The functions of the buttons are as below Function Button Name Function Description Cc Pla Program connects the device and start to y play the video Capture the current image the pictures Snapshot are saved in the picture directory of the mobile phone by default Set IP address of the DVR or DDNS port Setting user name password and device name 44 Last Group Can select the channel of last group Tp Next Group Can select the channel of next group About About the information 38 Select Channel Select to play the video of any channel of the device Coordinating with the Next Group you can switch to 8ch or 16ch H PTZ Control Control PTZ up down left and right faye Zoom Zoom in and zoom out Focal Length Increase or decrease the focal length Li amp Li NVR User Manual AA Iris Increase or decrease the iris 3 Use for the first time or need to modify the parameters please click Setting button to enter the parameter setting interf
22. k Port 1 RJ45 10M 100M 1000M self adaptive LAN port Wireless Port 3G WIFI RS485 Port Full duplex standard 485 port USB Port 2 USB ports 3 USB ports Local Login User name and password HDD 2 SATA ports 2 SATA 1 E SATA ports Power Supply DC12V3 5A DC12V5A Mobile Surveillance Support iPhone Windows Mobile BlackBerry Symbian Android 3G mobile phone Consumption lt 20W without HDD Working Temperature 10 C 55 C Working Humidity 10 90 Dimension Equipment 350mmx240mmx70mm Packing AD Oise ies 90 eis d OO res Weight without HDD N W 1 7Kg with packing 2 89Kg Carton 5pcs carton Weight 15 22Kg size 675mmx425mmx385mm Installation Way Desktop installation 39 NVR User Manual 6 3 2 2U 720P Economical NVR Series Technical Parameters Series 2U 720P Economical NVR Series Model Number 2U 720P 9ch NVR 2U 720P 16ch NVR Chassis Standard 1 5U Chassis Operating System Embedded LINUX operating system Image Code Standard H 264 MPEG4 AVC Image Code Control Image code quality adjustable variable bitrate and constant1 bitrate optional Dual Stream Each channel can set main stream and sub stream Audio Compression G 711 Video Standard 720P 1280x720 30fps second Monitoring Image 720p 1280x720 Ariality Recording Playback Ouiolity 9ch 720P 16ch 720P Recording Playback Support 4ch playback simulta
23. ll screen play Capture the current image the pictures are Snapshot saved in the picture directory of the mobile phone by default Set IP address of the DVR or DDNS port user Setting name password and device name Next Group Can select the channel of next group About About the information Select Channel Select to play the video of any channel of the ae 5 BSS Ki device A lt PTZ Control Control PTZ up down left and right v gt Q Zoom Zoom in and zoom out fea mm Focal Length Increase or decrease the focal length eK Iris Increase or decrease the iris 5 5 Symbian Mobile System Mobile client supports symbian system version above 9 1 namely symbian 3rd and 5th version mobile including all the 3rd version like Nokia 6120c e71 5800 with 240 320 320 240 resolution the 5th version with 360 640 640 360 resolution yx Installation and Operation Instruction 1 Download and Install the package file sisx in the phone and then you will find the program icon and find the vmeye in the specified directory 2 Click the vmeye program icon After 30 NVR User Manual running the program the below initialized interface will appear The functions of the buttons are as below Function Button Name Function Description Program connects the device and start to play the video Play Capture the current image the pictures are i Snapshot saved in the
24. neously Image Motion Each screen can set detection areas and set 6 level sensitivity Datactian Region Cover Every channel can set 4 cover regions Voice Talkback Two way voice talkback Recording Mode Support manual auto dynamic detection alarm trigger record mode Backup Way Support U disk USB mobile HDD USB DVD RW network storage and hark n Recording Storage Local HDD Network Video Input 9ch 16ch Network Audio Input 9ch 16ch Video 1ch VGA 1ch HDMI Outant Audio 1ch RCA Outnut Alarm Input 9ch 16ch External Alarm tch 4ch Ports Network 1 RJ45 10M 100M 1000M self adaptive LAN port Wireless 3G WIFI Dart ji ROBS Full duplex standard 485 port USB Port 2 USB ports 3 USB ports Local Login User name and password HDD 4 SATA ports 8 SATA ports 2 E SATA ports Power Supply AC110 240V ATX 200W 50 60 AC110 240V ATX 300W 50 60 Mobile Surveillance Liz Liz Support iPhone Windows Mobile BlackBerry Symbian Android 3G mobile nhana Consumption lt 30W without HDD lt 40W without HDD Working Temperature 10 C 55 C Working Humidity 10 90 Dimension Equipment 440mmx450mmx90mm Packing 5389mmx 530mmx225mm Weight without HDD N W 6 58Kg with packing 9 5Kg Carton 2pcs carton Weight 20 45kg size 555mmx545mmx470mm Installation Way Desktop installation 40 NVR Use
25. of the backup U disk or removable hard disk 3 Graphics speed up software whose version is above DX8 1 is not installed A
26. ormat do not match the setting format it can trigger corresponding linkage type 7 Video Signal Exception When there is video signal abnormality it can trigger corresponding linkage type 3 3 4 5 Account Parameters Account Setting You can add user modify user set user authority delete user 1 Add User You can set user name password confirm password user type and bind the IP address 2 Modify User You can modify the user name password confirm password user type and bind the IP address 3 User Privilege You can setup the privilege of the new added user 249 NVR User Manual Local PTZ Local Manual Recording Local Playback Local Parameter Settings Local Log Query Remote PTZ Remote Manual Recording Remote Playback Remote Parameter Settings Remote Log Query Remote Upgrade and Format Voice Talking Local Playback l Upgrade and Format Local View Local IP Device I Local Backup Local Reboot and Shutdown Remote Preview Remote Playback Arm Software and Output Remote Backup Control Serial Port Remotely Remote View i Remote IP Device Remote Reboot and Shutdown Cancel 4 Delete User Delete the new added user User Online View the user connected with the DVR logging way logging time and IP address 3 3 4 6 HDD Settings You can format the HDD and view the HDD capacity the free space and status etc 3 3 4 7 System Management Update Insert the
27. r Manual 6 3 3 1 5U 2U 1080P Professional NVR Series Technical Parameters Series 1 5U 2U 1080P Professional NVR Series Model Number 1 5U 1080P 16ch NVR 2U 1080P 16ch NVR Chassis Standard 1 5U Chassis Standard 2U Chassis Operating System Embedded LINUX operating system Image Code Standard H 264 MPEG4 AVC Image Code Control Image code quality adjustable variable bitrate and constant1 bitrate optional Dual Stream Each channel can set main stream and sub stream Audio Compression G 711 Video Standard 1080P 1920x 1080 30fps second Monitoring Image 1080p 1920x 1080 inte Recording Playback Onua 16ch 1080P Recording Playback Support 4ch playback simultaneously Image Motion Each screen can set mutiple detection areas and set 6 level sensitivity Region Cover Every channel can set 4 cover regions Voice Talkback Two way voice talkback Recording Mode Support manual auto dynamic detection alarm trigger record mode Backup Way Support U disk USB mobile HDD USB DVD RW network storage and Recording Storage Local HDD Network Video Input 16ch Network Audio Input 16ch Video 1ch VGA 1ch HDMI Outat Audio 1ch RCA vaver eee Alarm Input 16ch External Alarm 4ch Ports Network 1 RJ45 10M 100M 1000M self adaptive LAN port Wireless 3G WIFI Dask RS485 Full duplex standard 485 port USB Port 3 USB 2 0 por
28. rameter settings PTZ protocol and the correct connection of the 485 control line etc After setting the parameters select the Ete ehennee ___ channel which you want to control in the preview interface then control the left handed rotation right handed rotation up regulation down regulation of the lens zoom in and zoom out of the focal length zoom in and zoom out of the focal point zoom in and zoom out of the iris setting of the PTZ speed 3 3 3 2 PTZ Setup 1 Preset setting first turn the camera to the needed position through the direction buttons of the PTZ control then select a preset number and 12 NVR User Manual click Settings button Preset call select a preset number which needs to be called and click Call button 2 Cruise setting select a cruise number click Settings as shown in the below interface In the cruise setup interface select preset point cruise time cruise speed click Add button then the preset point of the cruise path is added successfully multi preset points can be added Click Delete button can delete the preset point of the cruise path Cruise call select a cruise number click Call button Cruise delete select a cruise number and click Delete button 1 Track setup select a track number and click Set button then start the PTZ control operations and then click Stop and the track is
29. rameters of each channel can be modified 1 Area settings Select the motion detection area press the left mouse button and drag to the area which you want to set motion detection click OK 2 Alarm Schedule Set the time intervals of alarm 3 Linkage Select the linkage way which you need 4 Copy To Copy the configuration parameters to other channels Onvif protocol does not dupport above function Video Lost Can modify the parameters of each channel 1 Alarm Schedule Set the time intervals of alarm 2 Linkage Select the linkage way which you need 3 Copy To Copy the configuration parameters to other channels Onvif protocol does not dupport above function Video Tampering The parameters of each channel can be modified 1 Area settings Select the motion detection area press the left mouse button and drag to the area which you want to set motion detection click OK 2 Alarm Schedule Set the time intervals of alarm 3 Linkage Select the linkage way which you need 4 Copy To Copy the configuration parameters to other channels Onvif protocol does not dupport above function Video Mask The parameters of each channel can be modified 455 NVR User Manual 1 2 Area settings Select the motion detection area press the left mouse button and drag to the area which you want to set motion detection click OK Copy To Copy the configuration parameters to other channels Onvif pro
30. remembered successfully 2 Track call select a track number and click Call button CrtiseTime 1 CruiseSpeed 1 Bl Add Delete Close 3 3 4 System Setting Click RA and the below interface will show Device Parameters Channel Parameters Network Parameters Device Name Alarm amp Exception Account Parameters D Settings DevicelD J System Managemet Device log Record Replace Yes Device Type 1 Device Serial No Channel Number 4 Alarm Input Number 4 Alarm Output Number HDD Numer i Device Time 2011 12 19 10 29 12 Modify Default Cancel Apply Bes NVR User Manual 3 3 4 1 Device Parameters Device Info Check and modify the basic information of the device System Version Check the basic information of the device system RS232 Can set RS232 serial port RS485 Can set the RS485 serial port DST Setting Tick DST check box then click the set button to set the start time and end time of DST 3 3 4 2 Channel Parameters Display Settings The configuration parameter of every channel can be modified 1 2 7 8 Camera Name You can modify the name of the specified channel Time Format You can select different time formats for the specified channel Date Format You can select different date format for the specified channel Display Week Can select different week display status for the specified channel OSD Position You can select any position for the
31. run the program as shown in the picture on the right The functions of the buttons are as below Function Button Name Function Description Program connects the device and start to play the P Play video Snapshot Capture the current image the pictures are saved in P the picture directory of the mobile phone by default fo Settin Set IP address of the DVR or DDNS port user 9 name password and device name 4 Last Group Can select the channel of last group Fp exi Can select the channel of next group Group About About the information goa Select Select to play the video of any channel of the device are om Channel Coordinating with the Next Group you can switch to 8ch or 16ch PTZ i A Control Control PTZ up down left and right BIY Zoom Zoom in and zoom out Focal Length Increase or decrease the focal length AFA Iris Increase or decrease the iris 4 Use for the first time you need to do the following settings 27 NVR User Manual Address The public IP address or DDNS of the DVR Port The server port of the DVR DVR Title The device name of the DVR which is used to differentiate different devices User ID The same as the user name on IE Password The same as the password on IE Cse Return button 5 4 Blackberry Mobile System The mobile client software supports version above 4 6 of blackberry system The screen resolution should be 480 360 or
32. shows the recording file size of the common bit rate under constant bit rate within one hour and one day for one channel The second step after confirming the time requirement of recording calculate the storage capacity i m one channel requires according to formula 2 unit MByte m q Xh x D 2 h recording time of each day Hour D number of days of recording storage For example the HDD capacity for recording one month for 1 channel 1 50M bit stream Unit GB m 659X 24X 31 490296MB 478GB The third step the total capacity accumulating qT for 16 channels timing recording for a whole day Unit GB q q 7M X16 7648GB If select 500G HDD 16 pieces of HDD will be required to full record User selects appropriate HDD according to the capacity The fourth step calculate the total capacity accumulating needed for allchannels alarm recording including motion detection Unit GB q Xa a alarm occurring rate Alarm occurring rate T T T tene T nT n 1 2 3 T The alarm time of the Nth day the time difference of larm end and alarm start Unit h 7 24h q the needed HDD capacity of T channels timing For example if the alarm occurring rate a for a month is 50 then the alarm recording capacity of 16 channels in one month is Unit GB 36 6 2 Remote Control Instruction 6 2 1 4 8ch DVR Channel Remote Control Description NVR User Manual q Xa Gig X 50 7648 x 502 3 7GB
33. t being used in the nearby 38 6 3 Technical Data NVR User Manual 6 3 1 1 5U 720P Economical NVR Series Technical Parameters Series 1 5U 720P Economical NVR Series Model Number 1 5U 720P 4ch NVR 1 5U 720P 9ch NVR 1 5U 720P 16ch Chassis Standard 1 5U Chassis Operating System Embedded LINUX operating system Image Code Standard H 264 MPEG4 AVC Image Code Control Image code quality adjustable variable bitrate and constant1bitrate optio nol Dual Stream Each channel can set main stream and sub stream Audio Compression G 711 Video Standard 720P 1280x720 30fps second Monitoring Image Quality 720p 1280x720 Recording Playback Quality 4ch 720P 9ch 720P 16ch 720P Recording Playback Support 4ch playback simultaneously Image Motion Detection Each screen can set detection areas and set 6 level sensitivity Region Cover Every channel can set 4 cover regions Voice Talkback Two way voice talkback Recording Mode Support manual auto dynamic detection alarm trigger record mode Backup Way Support U disk USB mobile HDD USB DVD RW network storage and backup Recording Storage Local HDD Network Video Input 4ch 9ch 16ch Network Audio Input 4ch 9ch 16ch Video Output ich VGA 1ch HDMI Audio Output ich RCA Alarm Input 4ch 9ch 16ch External Alarm Output 1ch ch 4ch Ports Networ
34. tocol does not dupport above function 3 3 4 3 Network Parameters Network Settings The network basic parameters of the device can be modified 1 2 3 oO ON OD A NIC Type there are different network card types for selections IP enter corresponding numbers to modify the IP address Obtain Auto Auto search IP function When open DHCP the IP Subnet Mask Default Gateway cannot be set If the current DHCP is valid then the IP Subnet Mask Default Gateway will show the value obtained by DHCP if the current DHCP is invalid IP address etc will show 0 Device Port Enter the corresponding device port Subnet Mask Enter the corresponding IP subnet mask Default Gateway Enter the corresponding gateway address MAC Display the MAC address current network port HTTP Port It is default to 0 Multicast Enter the corresponding multicast address Enable Wi Fi Tick the box before Enable Wi Fi and click Wi Fi and enter the following interface Refresh siis Password none W IP Obtain Auto IP Address Subnet Mask Network Gateway Cancel Click Refresh and find the wifi router and double click Then input the ip 16 NVR User Manual address subnet mask default gateway DNS server address1 and DNS server address 2 11 Enable 3G Tick the box before Enable 3G click 3G to enter the following interface Phone Number IP Work State Work with ADSL Cancel a T
35. ts Local Login User name and password HDD 2 SATA ports 1 E SATA ports 8 SATA ports 2 E SATA ports Power Supply DC12V5A AC110 240V ATX 300W 50 60 on Mobile Surveillance Support iPhone Windows Mobile BlackBerry Symbian Android 3G mobile alanaan Consumption lt 20W without HDD lt 40W without HDD Working Temperature 10 C 55 C Working Humidity 10 90 Dimension Equipment 350mmx240mmx70mm Packing 409mmx365mmx 129mm Equipment 440mmx450mmx90mm Packing 539mmx 530mmx225mm Weight without HDD N W 1 7Kg with packing 2 89Kg N W 6 58Kg with packing 9 5Kg Carton 5pcs carton Weight 15 22Kg size 675mmx425mmx385mm 2pcs carton Weight 20 45Kg size 555mmx545mmx470mm Installation Way Desktop installation 41 NVR User Manual 6 4 Common Problems Resolution gt The device cannot start normally or keeps restarting Possible causes 1 DVR is upgraded with wrong program which has caused the damage to the system software 2 The main board is defective please contact the supplier for maintenance 3 HDD is defective please change the HDD gt Cannot use the remote control Possible causes 1 Check if the batteries in the remote control are installed correctly especially the positive and negative polarity 2 Check if the batteries in the remote control have power 3 Check if the remote control window is covered 4 Please check if the
36. uration of the IP Channel First method auto search IPC 1 Click Remote Setting will show the below interface NVR User Manual Channel1 H Enable 192 168 0 100 5050 Protocol ONVIF Stream Type Main Stream User admin Password Auto Search Save Exit 2 Check Enable click Search the IP address protocol and port number of the IPC will appear as shown in the below picture NVR User Manual Channel1 Enable 192 168 0 100 5050 Protocol ONVIF Stream Type Main Stream User admin Password Auto Search LAN hh f192168 1 160 ONV IF 8o 3 After double click fill in the password in the password field 4 Click Save The image will appear on the preview interface as shown in the below picture NVR User Manual user Admin amp Second Method add IPC manually 1 Click Remote Setting will show the below interface NVR User Manual Channel1 Enable Protocol Stream Type User Password Auto Search LAN Save Exit 2 Check Enable edit the IP address and port number Select protocol and mode Edit user name and password Click Save finally NVR User Manual Channel1 Enable 192 168 0 100 5050 Protocol ONVIF Stream Type Main Stream User admin Password kkkkkk Auto Search Save Exit 3 The image will appear on the preview interface as shown in the below picture 10 NVR User Manual user Adm
37. windows mobile iPhone Symbian systems 5 1 Client Software Obtaining You can obtain the mobile surveillance client softwares from the CD or our technical department The corresponding client software of each system is as below MEYE_SB_S60_3rd sisx mobile surveillance client of the 3rd version of Symbian S60 system MEYE_SB_S60_5rd sisx mobile surveillance client of the 5th version of Symbian S60 system MEYE_WM cab mobile surveillance client of Window system MEYE_Android apk mobile surveillance client of Android system MEYE_RIM rar mobile surveillance client of BlackBerry system Note Iphone uses Vmeye downloaded from appstore 5 2 The Parameter Settings of the DVR which Supports Mobile Surveillance Resolution CIF or QCIF Frame Rate 5 10fps Stream Type Limited Stream 64 256Kb S Note you can adjust the settings according to the performance and network condition Mobile phone with higher performance and network condition will display better effect If the network condition is not good you can reduce the frame rate to ensure the fluency 5 3 Android Mobile System The mobile client software supports version above 1 5 of Android system including HTC G1 HTC Magic HTC Hero HTC G5 and so on O29 Es 26 NVR User Manual Installation and Operation Instruction 1 Copy the MEYE_Android apk to the mobile or download it from Google directly 2 Click the program to install 3 Click to
Download Pdf Manuals
Related Search