User Manual - Pro Audio And Lighting
Contents
1. UJA SH 5602Z LE User Manual Edition Notes Edition Notes Trademarks Copyright Notice Manual Usage Document Printing Intended Audience Disclaimer Document Revision Y CHAUVET The Q Wash 560Z LED User Manual Rev 05 covers the description safety precautions installation programming operation and maintenance of the Q Wash 560Z LED CHAUVET released this edition of the Q Wash 560Z LED User Manual in August 2011 CHAUVET is a registered trademark of CHAUVET amp Sons Inc d b a CHAUVET or Chauvet The CHAUVET logo in its entirety including the Chauvet name and the dotted triangle and all other trademarks on this manual pertaining to services products or marketing statements example It s Green Thinking are owned or licensed by CHAUVET Any other product names logos brands company names and other trademarks featured or referred to within this document are the property of their respective trademark holders CHAUVET owns the content of this user manual in its entirety including but not limited to pictures logos trademarks and resources Copyright 2011 CHAUVET All rights reserved Electronically published by CHAUVET in the United States of America CHAUVET authorizes its customers to download and print this manual for professional information purposes only CHAUVET expressly prohibits the usage copy storage distribution modification or printing of this manual2. CHAVVEL Operation Fan Control This option defines how you can control the fan speed whether with the DMX controller or only from the control panel 1 2 4 DMX SYSTEM Go to MENU gt SPECIAL gt FAN Select DMX or SYSTEM Enables the DMX controller to control the fan speed Control function Restricts the control of the fan speed to the control panel Color Calibration lf necessary you may adjust the color temperature of each of the macros White1 11 1 2 3 4 5 6 7 8 9 Go to MENU gt EXTRA Press lt ENTER gt PASSWORD will show on the display Press lt ENTER gt will show on the display Enter the password as explained in Keylock CALIB will show on the display Press lt ENTER gt 3200K will show on the display Use lt UP gt or lt DOWN gt to select another color temperature 3400 10000 K or press lt ENTER gt to edit the current temperature Select RED GREEN or BLUE Select a value 000 255 Repeat for the other colors White Calibration You may calibrate the white color shown when the RGB faders are at 255 and the MENU gt SPECIAL gt COLOR setting is RGBTOW le A de O ON AH Q Wash 560Z LED User Manual Rev 05 Go to MENU gt EXTRA Press lt ENTER gt PASSWORD will show on the display Press lt ENTER gt will show on the display Enter the password as explained in Keylock CALIB will show on the display Press lt ENTER
3. 255 0 100 000 lt gt 005 No function 006 010 High power 011 030 R 100 G Up B 0 031 050 R Down G 100 B 0 051 070 R 0 G 100 B Up 071 090 R 0 G Down B 100 091 110 R Up G 0 B 100 111 130 IR 100 G 0 B Down 131 150 R 100 G Up B Up 151 170 R Down G Down B 100 41 Power and Color 171 200 R 100 G 100 B 100 Macro 201 gt 205 White 1 3200 K 206 gt 210 White 2 3400 K 211 215 White 3 4200 K 216 gt 220 White 4 4900 K 221 S 225 White 5 5600 K 226 gt 230 White 6 5900 K 231 235 White 7 6500 K 236 gt 240 White 8 7200 K 241 gt 245 White 9 8000 K 246 250 White 10 8500 K 251 gt 255 White 11 10 000 K 12 Dimmer 000 amp 255 0 100 de Strobe 000 lt gt 009 No function 010 255 01 20 Hz 14 Zoom 000 lt 255 6 32 000 lt 019 No function 020 039 Pan tilt black activation 040 gt 059 Pan tilt black deactivation 060 079 Automatic fan speed 080 099 Slow fan speed 100 gt 119 Normal fan speed 120 139 High fan speed 140 gt 149 Auto program 1 3 s activation delay 150 gt 159 Auto program 2 3 s activation delay 15 Control 160 gt 169 Test 3 s activation delay 170 179 Custom program 3 s activation delay 180 gt 199 Sound1 200 gt lt 219 Reset 3 s activation delay 220 gt 235 No function 236 gt 239 DIMO 240 gt 243 DIM1 244 amp 247 DIM2 248 gt 251 DIM3 252 gt 255 DIM4 18
4. always use the handles e Always make sure that you are connecting this product to the proper voltage as per the specifications in this manual or on the product s sticker e Never connect this product to a dimmer pack or rheostat e Never disconnect this product by pulling or tugging on the power cable e Do not operate this product if you see damage on the housing lenses or cables In any of these cases have the damaged parts replaced by an authorized technician at once e Do not cover the ventilation slots when the product is operating to avoid internal overheating e Do not aim this product toward the Sun Otherwise the lenses could concentrate the solar energy and cause internal overheating e The maximum ambient temperature Ta is 104 F 40 C Do not operate this product at a higher temperature e Incase of a serious operating problem stop using this product immediately In the unlikely event that your CHAUVET product may require service please contact CHAUVET Technical Support LEDs gradually decline in brightness over time mostly because of heat Packaged in clusters LEDs exhibit higher operating temperatures than in ideal single LED conditions For this reason using clustered LEDs at their fullest intensity significantly reduces the LEDs lifespan Under normal conditions this lifespan can be of 40 000 to 50 000 hours If extending this lifespan is vital lower the operational temperature by improving the
5. Daien 1 MV iets VS MCN ed a tae ta ont theca eae acd sate ade eee tatty atest aan 1 Wie o mer ere meee anenree eR mer ti ate nore Aone nemee ore hmnoe sme eer are mere 1 Typographie GONVSNUONS sii 1 FCO DIV AMO ai 1 PROGUGCI als as GIANG AAPP A 1 A A e E sie 2 Expecled PEDIDA acid 2 2 IMFOQUCION urls 3 Product DescaplOirria lali ler id lada 3 ESAS tus ai a de sha 3 Adational SA UNC Ss E E E EE 3 PROGUCE OVE RVICW otsene a E 4 PPROGUCT DIMENSION 5 S SCD ea O A O 6 AGROWEN a as 6 A e EEE AEE E E EE E coh vege ects dua menest oben E E E E NET 6 SM A tert evel ET E A 6 DMX LINKIN A A O O ES 7 DNAX MO OS vasea E A a A 7 Master Slave COnmMeClIVINY natora e a Ledo ds 7 MOULIN sas canadian 8 Si A warsiadanisnuisa a N 8 A EE au amsaaae 8 AO DOV AU ON sicehsincwh ets excavate send cesses tcatos A 9 Gontrol Panel Descrip ardiente 9 CONTO OPUS dd e 9 A teslsaavenenct tk tealenasWoyaieh nid tadacbunanttt setae samaiaeseluadante ted omunbenanesis 9 Bi SS ero eS 9 Stands alone Opera ON sit tad lid 9 a ne ee ee 10 Display MOde irrita idolo 10 SON Wale Vertaal dad 10 A 0 ea ea tansarates cece eneea cout cates ea ceneaentsc cuca cescaaete sant 10 A E PEE A E E a cn asl E E oon brea E AT E E E AT cottons 10 A EEE ES ENE N E EA EEA A T E 10 DIME GUNO ea N E N dunce a a en 11 A 11 Range Mikal 11 Reset Cont oia 12 MOVE Bl kon ia 12 A ta etnree cate satan teckel t remit A case tar het cat coat a emt Nie 12 SOLO SS CUS cassettes tos ans r
6. gt 3200K will show on the display Use lt UP gt or lt DOWN gt to select RGBW Select RED GREEN or BLUE Select a value 000 255 Repeat for the other colors Operation System Default To default all the product s parameters to their default values do the following A 2 3 4 Dg Go to MENU gt EXTRA Press lt ENTER gt PASSWORD will show on the display Press lt ENTER gt will show on the display Enter the password as explained in Keylock CALIB will show on the display Use lt UP gt to select DEFAULT Press lt ENTER gt NO will show on the display Select YES and press lt ENTER gt to default the product or press lt MENU gt to exit Edit Custom This function allows you to program up to 255 steps in a single custom program Go to MENU gt EDIT Press lt ENTER gt to go to STEP Press lt ENTER gt to select a value The current value 001 255 will show on the LCD Press lt UP gt or lt DOWN gt to select a new value Press lt ENTER gt to accept the value Press lt ENTER gt to go to PAN Repeat steps 1 through 6 for TILT SPEED RED GREEN BLUE WHITE DIMMER STROBE ZOOM DIMSPEED and TIME Press lt ENTER gt to go to USE Select YES to save the settings for this step or NO to delete them 10 Repeat steps 3 to 8 for the other steps 4 The product will execute all the steps in the CUSTOM program and stop To make the product start over add a last step whos
7. on Faultv LED Driver board LEDs are off ga eee Send unit for repair Faulty LED Control board Faulty Display board Product and LEDs are on Faulty head fan Send unit for repair Head fan is off Faulty sensor or wiring Send unit for repair Faulty wiring Send unit for repair Product and LEDs are on Faulty zoom servo Zoom is inactive Faulty LED Control board Send unit for repair Faulty Display board Faulty sensor Send unit for repair Faulty pan belt Send unit for repair Pan movement problem Faulty pan motor Send unit for repair Faulty Display board Send unit for repair Faulty tilt sensor Send unit for repair l Faulty tilt belt Send unit for repair Tilt movement problem y p Faulty tilt motor Send unit for repair Faulty Display board Send unit for repair Circuit breaker fuse Reduce total load placed on the electrical circuit keeps tripping blowing Check electrical wiring Check for voltage on outlet A Check power cor ip Replace fuse Send uit for pak Check unt adaressing Damaged DMX cables Check DMX cables Wrong polarity on the controller Check polarity switch settings on the controller Loose DMX cables Check cable connections Non DMX cables Use only DMX compatible cables Product does not respond Bouncing signals Install terminator as suggested to wired DMX or Long cable low level signal Install an optically coupled DMX splitter before a responds erratically long section of cable or right after the product with the stron
8. or its content for any other purpose without its written consent For better results print this document in color on letter size paper 8 5 x 11 inches double sided If using A4 paper 210 x 297 mm configure your printer to scale the content accordingly Any person in charge of installing operating and or maintaining this product should read the guide that shipped with it as well as this manual in their entirety before installing operating or maintaining this product CHAUVET believes that the information contained in this manual is accurate in all respects However CHAUVET assumes no responsibility for any error or omissions in this document CHAUVET reserves the right to revise this document and to make changes from time to time in the content hereof without obligation of CHAUVET to notify any person or company of such revision or changes This does not constitute in any way a commitment by CHAUVET to make such changes CHAUVET may issue a revision of this manual or a new edition of it to incorporate such changes The Q Wash 560Z LED User Manual Rev 05 supersedes all previous versions of this manual Please discard any older versions of this manual you may have whether in printed or electronic format and replace them with this version Author Date Editor Date D Couppe 8 24 11 B Pillow 8 29 11 Q Wash 560Z LED User Manual Rev 05 CHAUVET Table of Contents Table of Contents lo BOTORS YOU Bed Minato Daaa
9. product s ventilation and reducing the external temperature In addition limiting the overall projection intensity may also help to extend the LEDs lifespan Q Wash 560Z LED User Manual Rev 05 CHAUVET 2 Introduction Introduction Product The Q Wash 560Z LED is an RGBWA LED moving yoke wash product Description The Q Wash 560Z LED consists of a base section and a moving yoke with a pan range of up to 540 The moving head which has a tilt range of 270 contains the 91 RGBW LEDs and the zoom motors The base section has the 3 and 5 pin DMX input and output sockets the IEC power input connector and the LCD based control panel Features Additional Features e Q Wash 560Z LED User Manual Rev 05 12 or 15 channel RGBWA LED moving yoke wash product Pan 540 Tilt 270 RGBWA color static mixing with or without DMX control Continuously variable zoom 6 32 Electronic strobe 0 20 Hz Electronic dimmer 0 100 High power setting Built in automated programs Remote product reset and vector speed channel 255 step fully customizable program Recall auto or custom programs via control panel or DMX Color temperature presets 3 200 10 000 K Color calibration Fan speed control 3 and 5 pin DMX input and output connectors LCD display with password protection Introduction Product Overview BACK Power Input 3 pin DMX In IEC Socket FUSE FSA 220 Fuse holder 5 pin DMX In Power Switch 5
10. 4 954 577 4455 FAX 954 741 5571 www chauvetlighting com Q Wash 560Z LED User Manual Rev 05 August 2011
11. Aten patel at tate eae setae degen e den ofa ae 12 A avnedskverteeeccauteau A Ea RAEE ETE AEEA 13 Color Calibrate PP E a a 13 WAE Gala N airen N ons banana ated N 13 A a a O eee eee een eae eee vee 14 A ors seadecteahaadeacsces dealuuadtuce too desnnshad aaanchadsatraacnad AE 14 Q Wash 560Z LED User Manual Rev 05 Table of Contents Men MaDe ciclos 15 A a A A A N 16 DD A A OP ee 17 a age eh cases ec sci AE EEA eae eae na Seesaw eee ge aera eee 17 AOVANCED a e e ET 18 5 VECMMIC Al NfO MaA O ii a 19 Proouct Maintenon eee eR nee enema tre ety NS re an oe er ee ee a ree 19 WROUDIES FOOLING GUNG Cisco race add 20 RESISTE A econ ano ee TSE ne no oP en or eT eo tdo a 21 E 1 se See E TE ee ce eee eee 21 He A A A O tis ae 21 Q Wash 560Z LED User Manual Rev 05 CHAUVET 1 Before You Begin What Is Included Unpacking Instructions Typographic Conventions Icon Meaning 4 Product at a Glance Before You Begin e One Q Wash 560Z LED e OnelEC Power Cord with Edison Plug US market e One Safety Cable e Two Omega Brackets e Warranty Card e Quick Reference Guide Immediately upon receiving this product carefully unpack and check the container in which you received it Make sure that you have received all the parts indicated above and that they are all in good condition If the material inside the container this product and any other accessory included with it appears damaged from shipping or if the co
12. HAUVET Operation Reset Control Ei Move in Black Power Ej Color Settings Ej It is possible to select how you can reset the product whether with the DMX controller or only from the control panel 1 Goto MENU gt SPECIAL gt RESET 2 Select DMX or SYSTEM DMX Enables the DMX controller to reset the product Control function SYSTEM Restricts the reset function to the control panel This option allows you to activate or deactivate the move in black 3 seconds delay 1 Goto MENU gt SPECIAL gt BLACK 2 Select YES to enable the 3 seconds delay or NO to make the blackout immediate You may use this function to boost the output power for specific short term applications 1 Goto MENU gt SPECIAL gt POWER 2 Select NORMAL or HIGH The product will return to Normal if the LEDs temperature becomes too high The COLOR setting determines how the Q Wash 560Z LED generates the white color based on various RGB settings 1 Goto MENU gt SPECIAL gt COLOR 2 Select OFF RGBTOW or UC UC When the RGB faders are set to 255 the output matches that of less efficient products Universal Color RGBTOW When the RGB faders are all set to 255 the resulting output is defined by RGB W see MENU gt EXTRA gt CALIB OFF When the RGB faders are all set to 255 the output is maximum although the resulting white color may not be balanced A O Wash 560Z LED User Manual Rev 05 Y
13. Q Wash 560Z LED User Manual Rev 05 CHAUVET Technical Information 5 Technical Information Product To maintain optimum performance and minimize wear the user should clean this product Maintenance frequently Usage and environment are contributing factors in determining the cleaning frequency As a rule the user should clean this product at least twice a month Dust build up reduces light output performance and can cause overheating This can lead to reduced light source life and increased mechanical wear To clean a product follow the recommendations below gt O Q Wash 560Z LED User Manual Rev 05 Unplug the product from power Wait until the product is has cooled Use a vacuum or dry compressed air and a soft brush to remove dust collected on the external vents and accessible internal components Clean all external optics and glass surfaces with a mild solution of non ammonia glass cleaner or isopropyl alcohol Apply the solution directly to a soft lint free cotton cloth or a lens cleaning tissue Drag any dirt or grime to the outside of the glass surface Gently polish the glass surfaces until they are free of haze and lint Always dry the external optics and glass surfaces carefully after cleaning them Refrain from spinning this product s fans using compressed air 19 Troubleshooting Guide Symptom Cause s Action s Product defaulted Configure product s parameters Faulty LED board Product is
14. RT Sets the pan start point restricted range P FINISH Sets the pan end point restricted range RANGE Ere Sets the tilt start point restricted range REVERSE INVERT H Sets the tilt end point restricted range Activates the changes HSE NO YES _ Activates the move in black delay 3 s SEGET DMX The DMX controller can reset the product SYSTEM The control panel can reset the product NORMAL LEDs illuminate at normal or high intensity POWER HIGH NOTE The product will return to Normal if the LEDs SPECIAL temperature becomes too high UC RGBW 255 The output matches that of older products COLOR A RGBW 255 The RGBW output is set by RGB W OFF RGBW 255 The RGBW output is maximum DMX The DMX controller can set the fan speed aN The control panel can reset the fan speed Selects the program step PAN Selects the pan position Selects the tilt position SPEED Selects the pan tilt speed EDIT RED 000 255 Combines red green blue white and amber to obtain a custom color AMBER Continues on the next page Q Wash 560Z LED User Manual Rev 05 15 Operation MANEL Continued from previous page 1 Level 2 Level 3 Level Description DIMMER 000 255 _ Selects the dimmer value STROBE 01 20 Selects the strobe frequency and mode EDIT ZOOM Select the zoom position Cont DIMSPEED Selects the dimmer speed Selects the step duration USE NOYES Activates the change
15. aging will be the customer s responsibility As a suggestion proper FedEx packing or double boxing is the method Chauvet recommends CHAUVETO reserves the right to use its own discretion to repair or replace returned product s The carrier is responsible for any damage incurred during shipping to this product or any part that shipped with it Therefore if the received merchandise appears to have damages caused during shipping the customer must submit the damage report and any related claims with the carrier not CHAUVET The customer must submit the report upon reception of the damaged merchandise Failure to do so in a timely manner may invalidate the customer s claim with the carrier For other issues such as missing components or parts damage not related to shipping or concealed damage the customer must make claims to CHAUVETO within seven 7 days of receiving the merchandise World Headquarters United Kingdom amp Ireland CHAUVETO CHAUVET Europe Ltd General Information General Information Address 5200 NW 108th Avenue Address Unit 1C Sunrise FL 33351 Brookhill Road Industrial Estate Voice 954 577 4455 Pinxton Nottingham UK Fax 954 741 5571 NG16 6NT Toll free 800 762 1084 Voice 44 0 1773 511115 Technical Support Fax 44 0 1773 511110 Voice 954 577 4455 Press 4 Fax 954 756 8015 Technical Support Email techOchauvetlighting com Email uktech chauvetlighting com World Wide Web World Wide Web www chauv
16. alues Master Slave The Master Slave mode allows a Q Wash 560Z LED product to control one or more Connectivity products of the same model without a DMX controller The controlling product becomes the master when running the Auto1 Auto2 or Custom programs You must configure the controlled slave products to operate in SLAVE mode from their respective control panels During the Master Slave operation the slave products will operate in unison with the master product Otherwise the signals from the DMX controller may interfere with the signals from O DO NOT connect a DMX controller to the products operating in Master Slave mode the master product The Operation chapter of this manual provides detailed instructions on how to configure the Master and Slave units QWash 560Z LED User Manual Rev 05 Setup CHAUVET Mounting Before mounting this product read and follow the safety recommendations indicated in the Safety Notes section page 2 of this manual Orientation Always mount this product in a safe position with adequate room around it for ventilation head motion configuration and maintenance Rigging CHAUVET recommends following the general guidelines below when mounting this product e When selecting an installation location consider ease of access to the product for operation programming adjustments and routine maintenance e Make sure to mount this product away from any flammable material as indicate
17. d in the Safety Notes section or obstructions that may block the moving head e Never mount the product in places where rain high humidity extreme temperature changes or restricted ventilation may affect it e If hanging this product make sure that the location where you are mounting it can support its weight Please see the Technical Specifications section of this manual for the weight requirement of this product Procedure The Q Wash 560Z LED comes with two omega brackets to which you can attach clamps You must supply your own clamps and make sure that they are capable of supporting the weight of this product You will have to use two mounting points per product The omega brackets also serve to anchor this product to a panel For floor standing operation this product has built in rubber feet oo Safety Cable included 3 o_o Clamp not included Omega bracket included Product Mounting Diagram a z A a T WU U DA A A A A T Overhead Mounting Floor Standing 8 Q Wash 560Z LED User Manual Rev 05 CHAUVET 4 Operation Control Panel Description Control Options Programming Ei DMX Operation Ei Stand alone Operation E Operation Button Function lt MENU gt Exits from the current menu or function Enables the currently displayed menu or sets the currently selected value See in to the current function UP gt Navigates upwards through the menu list and increases the numeric value when
18. e duration is 0 seconds Example Step 1 Step 2 Step 3 Step 4 Step 5 l l v Step 255 Time 5 Use Yes Time 4 Use Yes Time 6 Use Yes Time 0 Use Yes This step creates a loop Time 0 Use No l l Unused steps y v Time 0 Use No Q Wash 560Z LED User Manual Rev 05 CER Operation Menu Map 1 Level 2 Level 3 Level Description ADDRESS 001 512 Selects a starting DMX address RESET NO YES Resets the product s custom settings HIGH Select the fan s operation mode ee NOTE The fan will go to High mode if the product s LOW internal temperature becomes too high despite any a E or DMX setting DMX512 Selects DMX running mode Selects the first automatic program Selects the second automatic program INTRO CUSTOM Selects the user customizable program SLAVE Selects the Slave running mode Starts the product s test sequence CHANNELS BASIC Selects the 11 channel DMX mode ADVANCED Selects the 15 channel DMX mode 60 CLOSE Turns off the display after 60 seconds cuit BRIGHT Keeps the display on KEYLOCK NO YES Activates deactivates the control panel password DIMMER4 1 Slow DIMMERA to fast DIMMER1 dimmer curves Linear dimmer INFO EDITION Shows the version of the installed S W NORMAL Defines the direction of the pan fader en Defines the direction of the tilt fader Defines the direction of the dimmer fader PER NO YES Activates the changes P STA
19. etpro com www chauvetlighting co uk QWash 560Z LED User Manual Re 065 TT 5g Technical Information Technical Specifications Length 9 1 in 232 mm Dimensions and Weight Width 13 3 in 339 mm Height 14 2 in 361 mm Note Dimensions in inches rounded to the nearest decimal digit Power Supply Type Switching internal Electrical Parameter Consumption Inrush current Power I O Connectors Cord plug Light Source Type LED Color Red Green Blue White Amber Parameter Illuminance O 5m Beam angle Field angle Photo Optic Motion Pan 0 540 Max External Temperature 104 F 40 C Thermal DMX I O Connectors 3 and 5 pin XLR Product Name Q Wash 560Z LED Ordering 292 Range 100 240 V 50 60 Hz 120 V 60 Hz 309W 2 7A N A Input IEC Edison Power Current 3 W 942 mA Quantity 22 23 22 12 12 2 322 Zoom 13 100 lx 6 Zoom 6 82 gr 87 Tilt 0 270 Cooling System Forced fans Connector Type Sockets litem Code 01010397 E 3144482 v CHAUVET Weight 21 2lbs 9 62kg Voltage Selection Auto ranging 230 V 50 Hz 289W 1 4A N A Output N A N A Lifespan 50 000 hours Channel Range 12 15 ltem Number QWASH560ZLED WTERTE e CONFORMS TO UL STD 1573 GERTIFIED TO US csa STD cz2 2 No 166 Q Wash 560Z LED User Manual Rev 05 CHAUVETO 5200 NW 108th Avenue Sunrise FL 33351 USA 800 762 108
20. g signal Too many products Install an optically coupled DMX splitter after unit 32 Interference from AC wires Keep DMX cables separated from power cables or fluorescent black lights Faulty Display board Send unit for repair If you still experience technical problems after trying the above solutions or if you need to send the unit for repair contact CHAUVET Technical Support 20 Q Wash 560Z LED User Manual Rev 05 CHA Y VEL Returns Procedure Ei E Claims Contact Us Technical Information The user must send the merchandise prepaid in the original box and with its original packing and accessories CHAUVET will not issue call tags Call CHAUVET and request a Return Merchandise Authorization RMA number before shipping the product Be prepared to provide the model number serial number and a brief description of the cause for the return The user must clearly label the package with a Return Merchandise Authorization RMA number CHAUVET will refuse any product returned without an RMA number DO NOT write the RMA number directly on the box Instead write it on a properly affixed label Once you have received the RMA number please include the following information on a piece of paper inside the box e Your name e Your address e Your phone number e The RMA number e A brief description of the problem Be sure to pack the product properly Any shipping damage resulting from inadequate pack
21. in a function DOWN gt Navigates downwards through the menu list and decreases the numeric value when in a function You can set the Q Wash 560Z LED start address in the 001 512 DMX range This allows for the control of up to 34 products in the 15 channel ADVANCED personality Refer to the Menu Map on page 15 to learn how the menu options relate to each other The menu map has a Menu Level and a variable number of programming levels for each option To go to an option in the Menu Level press lt MENU gt repeatedly until the option shows on the display Press lt ENTER gt to select it This will take you to the first programming level for that option To select an option or value within the current programming level press lt UP gt or lt DOWN gt until shown on the display Press lt ENTER gt to accept If there is another programming level you will see that first option or you will see the selected value To exit to the previous menu level press lt MENU gt In the EDIT menu lt UP gt and lt DOWN gt will only change the value of the current option To change to the next option press lt ENTER gt 1 Select DMX operation a Go to MENU gt INTRO gt RUN b Select DMX512 2 Select a DMX mode a Go to MENU gt INTRO gt CHANNELS b Select BASIC or ADVANCED 3 Select the starting address a Go to MENU gt INTRO gt ADDRESS b Select a starting address 001 498 Advanced or 001 501 Basic The highest possib
22. le starting address for each DMX mode Is DMX Mode DMX Address Basic 501 Advanced 498 1 Goto MENU gt INTRO gt RUN 2 Select a stand alone operation mode AUTO 1 AUTO 2 CUSTOM or TEST Of all the stand alone operation modes indicated above only CUSTOM is editable see Edit Custom QWash 560Z LED User Manual Rev 05 Operation Master Slave E Display Mode Ej Software Version Keylock Fan Ej Reset CHAUVET The Master Slave mode allows a group of Q Wash 560Z LED products the slaves to simultaneously duplicate the output of another Q Wash 560Z LED the master whether auto custom or static modes without a DMX controller 1 Setthe master unit a Select a stand alone mode as indicated above 2 Set each of the slave units a Go to MENU gt INTRO gt RUN b Select SLAVE e Do not connect a DMX controller to the master or slave products e The master unit should be the first unit in the DMX daisy chain This mode defines how the LCD s backlight will work 1 Goto MENU gt INTRO gt DISPLAY 2 Select a display mode 60 CLOSE or BRIGHT e When in the 60 CLOSE setting the LCD s backlight will turn off after 60 s e When in the BRIGHT setting the LCD s backlight will stay on This option will show the installed software version 1 Goto MENU gt INTRO gt INFO 2 The display will show Edition 3 Press lt ENTER gt to see the installed sof
23. lug or you need to change the Edison plug use the table below to wire the new plug Connection Wire US Wire Europe Screw Color US AC Ground Green Yellow Green Yellow Green Make sure to disconnect the product s power cord before replacing a blown fuse and always replace it with a fuse of the same type and rating 1 Wedge the tip of a flat head screwdriver into the slot of the fuse holder and pry it out of its housing 2 Remove the blown fuse from its holder and replace with a fuse of the exact same type and rating 3 Insert the fuse holder back in its place and reconnect power The fuse is located inside this compartment Remove it using a flat head screwdriver Q Wash 560Z LED User Manual Rev 05 CHAUVET Setup DMX Linking You may link the Q Wash 560Z LED loa DMX controller using a standard DMX serial connection If using other DMX compatible products with this product you can control them individually with a single DMX controller If you are not familiar with the DMX standard or if you need information about the DMX cables needed to link this product to a DMX controller you may download the DMX Primer document from the CHAUVET web site www chauvetpro com DMX Modes The Q Wash 560Z LED uses the standard DMX data connection for its Basic and Advanced DMX modes You will find information about these DMX modes in the Operation chapter configuration details and the DMX Values section individual channel v
24. mer curve DIM1 is the fastest and DIMA is the slowest Fader Reversal This option allows you to define how the pan tilt and dimmer increase based on the direction you move the corresponding fader 1 A ee ee Go to MENU gt INVERT gt PAN Select a fader direction NORMAL or REVERSE Go to MENU gt INVERT gt TILT Select a fader direction NORMAL or REVERSE Go to MENU gt INVERT gt DIMMER Select a fader direction NORMAL or REVERSE Go to MENU gt INVERT gt USE Select YES to activate the new settings or NO to stop using them e When in NORMAL the pan tilt and dimmer values will increase as the position 4 of the respective fader increases e When in REVERSE the pan tilt and dimmer values will decrease as the position of the respective fader increases Range Limitation When it is necessary to limit the pan or tilt range you can do the following 1 2 3 4 5 6 7 8 9 1 Q Wash 560Z LED User Manual Rev 05 Go to MENU gt RANGE gt P START Select the starting point for the limited pan 000 255 Go to MENU gt RANGE gt P FINISH Select the finishing point for the limited pan 000 255 Go to MENU gt RANGE gt T START Select the starting point for the limited tilt D00 255 Go to MENU gt RANGE gt T FINISH Select the finishing point for the limited tilt 000 255 Go to MENU gt RANGE gt USE 0 Select YES to activate the new settings or NO to stop using them C
25. nd Color Macro No function High power R 100 G Up B 0 R Down G 100 B 0 R 0 G 100 B Up R 0 G Down B 100 R Up G 0 B 100 R 100 G 0 B Down R 100 G Up B Up R Down G Down B 100 R 100 G 100 B 100 White 1 3200 K White 2 3400 K White 3 4200 K White 4 4900 K White 5 5600 K White 6 5900 K White 7 6500 K White 8 7200 K White 9 8000 K White 10 8500 K White 11 10 000 K Dimmer 000 lt gt 255 0 100 000 lt gt 009 No function 010 gt 255 01 20 Hz Zoom 000 lt 255 6 32 000 019 020 039 040 gt 059 060 lt 079 080 099 100 gt 119 120 gt 139 140 gt 149 150 gt 159 160 gt 169 170 179 180 gt 199 200 gt 219 220 gt 255 Control No function Pan tilt black activation Pan tilt black deactivation Automatic fan speed Slow fan speed Normal fan speed High fan speed Auto program 1 3 s activation delay Auto program 2 3 s activation delay Test 3 s activation delay Custom program 3 s activation delay No function Reset 3 s activation delay No function Y Y Operation CHA VET ADVANCED Channel Function Value Percent Setting 1 Pan 000 lt gt 255 0 540 2 Pan Fine 000 255 Fine movement control 3 0 270 4 Fine movement control 5 Fast Slow 6 Red 000 255 0 100 7 Green 000 amp 255 0 100 8 Blue 000 255 0 100 9 White 000 255 0 100 10 Amber 000 amp
26. ntainer shows signs of mishandling notify the shipper immediately In addition retain the container and all the packing material for inspection See the Claims section Convention 1 512 50 60 COLORado 1 UM lt SET gt Settings MENU gt Settings 1 10 Yes No ON Icon A Ei n the Technical Information chapter Meaning A range of values in the text A set of mutually exclusive values in the text The name of another publication or manual A button on the product s control panel A product function or a menu option A sequence of menu options A range of menu values from which to choose in a menu A set of two mutually exclusive menu options in a menu A unique value to be entered or selected in a menu Meaning This icon indicates critical installation configuration or operation information Failure to comply with this information may render the product partially or completely inoperative damage third party equipment or cause harm to the user This icon indicates important installation or configuration information Failure to comply with this information may prevent the product from functioning correctly This icon indicates useful although non critical information The term DMX used throughout this document refers to the USITT DMX512 A transmission protocol Use on Dimmer Outdoor Use Sound Activated DMX Master Slave Q Wash 560Z LED User Manual Rev 05 Auto Programs Auto ranging Po
27. pin DMX Out FRONT he Q Wash 560Z LED User Manual Rev 05 Y CHAVET Introduction Product Dimensions mah 12 2 in 310mm QWash 560Z LED User Manual Re 05 TTT Setup 3 Setup AC Power A i AC Plug A Fuse Replacement Y CHAVET The Q Wash 560Z LED has an auto ranging power supply that can work with an input voltage range of 100 240 VAC 50 60 Hz Make sure that you are connecting this product to the proper voltage as per the specifications in this guide or on the product s sticker Always connect this product to a protected circuit with an appropriate electrical ground to avoid the risk of electrocution or fire To determine the power requirements for the Q Wash 560Z LED refer to the label affixed to the side of the product Alternatively you may refer to the Technical Specifications chart inthe Technical Information chapter of this manual The listed current rating indicates the maximum current draw during normal operation For more information download the Sizing the Circuit Breakers document from the CHAUVET web site www chauvetpro com Never connect this product to a rheostat variable resistor or dimmer circuit even if the rheostat or dimmer channel serves only as a 0 to 100 switch The Q Wash 560Z LED comes with a power input cord terminated with an IEC connector on one end and an Edison plug on the other end US market If the power input cord that came with your product has no p
28. s EXTRA PASSWORD eee Opens the Extra menu see below Extra Menu 1 Level 2 Level 3 Level 4 Level Description Sets color temperature for White 1 BLUE Sets color temperature for White 2 BLUE Sets color temperature for White 3 BLUE 4900 K Sets color temperature for White 4 BLUE Sets color temperature for White 5 BLUE Sets color temperature for White 6 CALIB ld Sets color temperature for White 7 BLUE 7200 K Sets color temperature for White 8 BLUE 8000 K Sets color temperature for White 9 BLUE Sets color temperature for White 10 BLUE 8500 K Sets color temperature for White 11 BLUE Sets color temperature for 109005 SPECIAL gt COLOR gt RGBTOW BLUE DEFAULT DEFAULT NO YES N A Defaults the product to factory settings ae S Wash 560Z LED User Manual Rev 05 CHAUVET DMX Values BASIC Channel 1 N amp 01 amp GO DO 10 11 12 Q Wash 560Z LED User Manual Rev 05 Function Value Pan 000 255 0 540 0 270 Red 000 amp 255 0 100 Green _ 000 amp 255 0 100 Blue 000 amp 255 0 100 White 000 amp 255 0 100 Amber 000 amp 255 0 100 Operation Percent Setting 000 lt gt 005 006 010 011 030 lt gt 050 lt gt 070 lt gt 090 gt 110 130 150 gt 170 lt gt 200 gt 205 206 gt 210 211 S 215 216 gt 220 221 225 226 gt 230 231 235 236 gt 240 241 245 246 gt 250 251 255 Power a
29. tware version This option enables or disables the LCD key 1 Goto MENU gt INTRO gt KEYLOCK 2 Select YES or NO When in the YES setting the user will have to enter the password after 30 seconds of control panel inactivity or each time he she turns the product on The default non modifiable password is lt UP gt lt DOWN gt lt UP gt lt DOWN gt and lt ENTER gt You can select the fan operation mode as follows 1 Goto MENU gt INTRO gt FAN 2 Select HIGH NORMAL LOW or AUTO The product s controller will force the fan to High if the product s internal temperature becomes too high despite any manual or DMX setting This option allows you to reset all custom settings to their default values 1 Goto MENU gt INTRO gt RESET 2 Select YES or NO Q Wash 560Z LED User Manual Rev 05 CHAUVET Operation Dimmer Curve This setting determines how fast the output of the Q Wash 560Z LED changes when the operator modifies the values of the Red Green Blue White Amber and Dimmer faders This setting gives the user four different options to simulate the dimming curve of an incandescent lighting product To select the dimmer curve do the following 1 2 Go to MENU gt INTRO gt DIMMER Select DIMMER 0 4 DIMMER 0 The output is proportional linear to the Dimmer and RGBW channel values 4 DIMMER 1 4 The output follows the Dimmer and RGBW channel values based on the corresponding dim
30. wer Supply Y Y Replace Fuse 7 User Seniceaite O O Duty Cycle Before You Begin Safety Notes A O Personal Safety Mounting and Rigging Power and Wiring Operation Ei Expected LED Lifespan It is important to read all these notes before starting to work with this product The Safety Notes include important safety information about the installation usage and maintenance of this product There are no user serviceable parts inside this product Any reference to servicing you may find from now on in this User Manual will only apply to properly CHAUVETO certified technicians Do not open the housing or attempt any repairs unless you are certified to do so Please refer to all applicable local codes and regulations for the proper installation of this product e Avoid direct eye exposure to the light source while the product is on e Always disconnect this product from its power source before servicing e Always connect this product to a grounded circuit to avoid the risk of electrocution e Do not touch this products housing when operating because it may be hot e This product is for indoor use only To prevent risk of fire or shock do not expose this product to rain or moisture e Make sure there are no flammable materials close to this product while operating e When hanging this product always secure it to a fastening device using a safety cable included e Do not carry this product from the head
Download Pdf Manuals
Related Search