the 2know! classroom response system
Contents
1. Installation and Set Up Guide 14 How many Renaissance Responders or NEO 2 laptops can be used with one Receiver at the same time Up to 300 can be used with one Renaissance Receiver What is the range of a Renaissance Receiver how far away from the Renaissance Receiver can a student with a Responder or NEO 2 sit Up to 45 metres Will students have to point their Responders or NEO 2 laptops directly at the Renaissance Receiver in order to get their responses accepted No The 2Know classroom response system uses Radio Frequency RF technology which is not blocked by line of sight obstructions The answer is recorded as long as the device is within the range of the receiver up to 45 metres What radio technology does 2Know use 2Know operates in the public 2 4 GHz band the frequency used by WiFi Bluetooth and other wireless devices The system uses standard IEEE 802 15 4 modulation and communication protocols to avoid interference with other devices operating in the same area Will the system hop to an open channel Renaissance Receivers and Responders include logic to select a clear channel from the 15 available channels when the Renaissance Receiver is started How does the Renaissance Receiver handle interference The system uses Direct Sequence Spread Spectrum DSSS in addition to Carrier Sense Multiple Access with Collision Avoidance CSMA CA in order to communicate when other wireless devices are near2. Know Classroom Response System Installation amp Set Up Guide Encourage Student Participation and Assess Performance Instantly Contact Information United Kingdom Technical questions or problems Phone 0870 120 0718 Email UK Help alphasmart com Latest support information Web www alphasmart co uk support For product information and how to purchase products visit www alphasmart co uk Copyright Notice Europe the Middle East and Africa Technical questions or problems Phone 44 870 120 0718 Email UK help alphasmart com Latest support information Web www alphasmart co uk support For product information and how to purchase products outside the UK visit www alphasmart co uk www alphasmart eu Copyright 2010 by Renaissance Learning Inc All Rights Reserved This publication is protected by US and international copyright laws It is unlawful to duplicate or reproduce any copyrighted material without authorisation from the copyright holder This document may be reproduced only by staff members in schools that have a licence for the 2Know classroom response system For more information contact Renaissance Learning Inc at the address above 2Know Accelerated Maths AccelTest NEO NEO 2 Renaissance Renaissance Learning the Renaissance Learning logo Renaissance Receiver and Renaissance Responder are trademarks of Renaissance Learning Inc and its subsidiaries registered common l
3. Wireless Server Utility program on your computer Monitoring Receiver Activity and Status 2Know Classroom Response System Installation and Set Up Guide In the Renaissance Wireless Server Utility the Log tab shows you Receiver activity and the Receivers tab shows you the status of the Receiver connected to your computer To start the utility follow the instructions for your operating system Windows Click Start Programs gt Renaissance Wireless Server gt Renaissance Wireless Server Utility e Macintosh Open the Applications folder then the Renaissance Wireless Server folder Double click Renaissance Wireless Server Utility RESPONDERS You do not need to do anything to set up the Responders They are shipped with fresh alkaline batteries already inside When you have connected your Receiver the Responders can connect to it when you turn them on Firmware Versions and Responder Features Your Responders come with version 3 x firmware installed Firmware is the software that runs inside your Responders and Receiver The firmware on your Renaissance Responders serves three purposes It tells the Responders which features you want e It allows you to update Responders when necessary Ifyou are using a 1 xx version of the Responder firmware you can switch between the even and odd versions of the firmware to switch between a small and large font Two sets of firmware versions are available Firm
4. and subject to conditions enumerated below of such product returned intact which shall appear to RLI upon inspection to have been defective in material or workmanship Replacement or repair will be accomplished at one of the Renaissance Distribution Centers Please contact Renaissance Learning UK Ltd AlphaSmart or the RL dealer or Distributor you bought the product from to arrange refund Such replacement shall be made free of charge if a defect becomes apparent and RLI is notified within the warranty period This warranty does not include any taxes which may be due in connection with replacement or repair nor any installation transportation or postage costs to return the unit to RLI This warranty does not cover repair or replacement because of damage from unreasonable use damage from road hazards accident fire or other casualty misuse negligence incorrect wiring lightning etc and any use or installation not in conformance with instructions furnished by RLI or repairs or replacement needed because of modifications not authorised or supplied by RLI This warranty is expressly in lieu of any other warranties express or implied including any warranty of merchantability or fitness for particular purpose Remedies under this warranty are expressly limited to the provision of products as specified above and any claims for loss arising out of the failure of products to perform for any period of time or special indirect or consequential damage
5. new PIN and press Enter Displaying a Forgotten PIN Owned Responders Press and join the session Enter the administrator PIN default is 1234 and press Enter 3 After the Renaissance Responder states the device is unlocked and reveals the PIN press any key Resetting the Owner of an Owned Responder 1 Highlight Settings and press Select 2 Highlight Reset Owner and press Select 3 Enter the administrator PIN default is 1234 and press Enter Synchronizing to Transmit AccelTest Homework and Notes 1 Enter the student PIN and press Enter 2 Highlight Synchronize and press Select 3 When prompted press any key to return to the menu 2Know Classroom Response System Installation and Set Up Guide Viewing and Completing AccelTest Homework for Owned Renaissance Responders Enter the student PIN and press Enter Highlight Homework and press Select Highlight the assignment and press Select Po NS Enter your responses then press Yes to verify that the homework is complete Viewing AccelTest Notes for Owned Renaissance Responders Enter the student PIN and press Enter Highlight Notes and press Select Highlight a note and press Select Press Menu when you have finished reading the note OPO NS Choose Yes or No and press Select About the Responder Calculator If you select version 1 x firmware see page 5 the Renaissance Responder includes a basic calculator that allows students to add s
6. set it up and have it running in as little as five minutes For assistance you can email us at UK help alphasmart com Is the 2Know classroom response system portable Yes very portable The complete system comes in a carrying case designed to be transported from one classroom to the next 2Know Classroom Response System Installation and Set Up Guide 11 Does the 2Know classroom response system work with interactive whiteboards Yes You can also display your PowerPoint presentations Do I need a projector or television to use 2Know No In the 2Know classroom response system questions and answer choices can be displayed right on the Renaissance Responders eliminating the need for a projector or television or turning off lights in the classroom However the system does have the capability to be connected to either a projector or television monitor if you choose Will 2Know work with a laptop Yes You simply need a USB port for the Receiver No AC adapter is needed Questions About AccelTest Software Can AccelTest be installed on a network 2Know is meant to be installed and used in a classroom environment AccelTest software is meant to be installed on individual computers but the database may be stored on a network Only one person may use AccelTest with a database at a time What is the default password for the AccelTest software The default password is admin Does the AccelTest software come with con
7. the name is different from the name of your school s other Receivers Kd Renaissance Wireless Server Utility File Edit Tools Help Stop Server is running Click Stop to shutdown the Renaissance Wireless Server Log _ Server Settings Device Settings Receivers Wireless Devices Network Name TP Receiver O Users will use this name to locate and connect to this server using their wireless devices Encryption off Oon Enabling encryption requires that each device share the key you enter in the above area Keys are limited to digits 0 9 and characters A E Update Network Settings O Set Administrator PIN O Renaissance Place Settings The Administrator PIN is required to authorize Renaissance Place connection information is use of secure features such as device required for wireless device access to a firmware updates and resetting a user s PIN Renaissance Place server Click Update Network Settings Click OK Tell your Responder users the new Receiver name If you want to change the Administrator PIN click Set Administrator PIN Enter the new PIN 4 8 characters with letters and or numbers and enter it again in the second blank field to confirm it Then click OK Close the utility when you have finished It will continue running in the background Other Receiver Information Default Administrator PIN The default administrator PIN is 1234 This PIN is required when you use the Renaissance
8. Will the radio frequency RF technology of 2Know interfere with my wireless network No The system is designed to work in a noisy environment without interfering with other wireless technology What is a firmware update and how do l install one ona Renaissance Responder Firmware is the software inside your Renaissance Responders and Renaissance Receiver For more information see page 5 How do I change the font size on a Renaissance Responder This is possible if you are using version 1 x firmware See page 5 2Know Classroom Response System Installation and Set Up Guide 15 How do I start the Renaissance Wireless Server Utility Windows Click Start Programs gt Renaissance Wireless Server gt Renaissance Wireless Server Utility Enter the administrator PIN 1234 by default Macintosh Open the Applications folder on your hard drive then the Renaissance Wireless Server folder Double click Renaissance Wireless Server Utility Enter the administrator PIN 1234 by default LIMITED WARRANTY Renaissance Learning Inc RLI warrants each Renaissance Responder and Renaissance Receiver sold by RLI to be free from defect in material and workmanship under normal use and service beginning with the date of delivery to the purchaser This warranty is subject to the following conditions The warranty period is classified as two 2 years and is limited to the replacement or repair during the warranty period
9. aw or pending registration in the United States and in other countries Macintosh is a registered trademark of Apple Computer Inc registered in the US and other countries Windows is a registered trademark of Microsoft Corporation in the United States and or other countries 3 2010 2K CRSUK CONTENTS The 2Know Classroom Response System 1 Renaissance Responder 0 cece cece cee eect eee eee reenn 1 Renaissance Receiver cece cence ence nner enter recto nee eneees 1 Software Used with the 2Know Classroom Response SVSICN voce dew kee wae Oe Se hea aye 2 AccelTest Software d icc aids chgivia suis Page ena anaes bee eas 2 SKniow Toolbar yi eek hat hal aad E E A hie hoo Soothes 2 Accelerated Maths RP 2 cece ec eee cee cence teen ene ene eeae 2 Setting Up the Renaissance Receiver 3 Connecting the Renaissance Receiver to Your Computer 3 Naming the Receiver and Changing the PIN cece ee eee ee eee 3 Other Receiver Information 0 ce cece cece eect ene n een eaes 4 Default Administrator PIN 0 c cece cece cee cence een eneennees 4 Monitoring Receiver Activity and Status 0 0 eset e eee 4 Responders Aehre Peete hl path aa et uals bas Pte hone 5 Firmware Versions and Responder Features 2 eee ee eee ees 5 Other Responder Settings 0 cee cece cece eee eee ee eee eee eenes 6 Responder Key Tas
10. er will find and display the available updates Scroll to the version you want If you are using a 1 xx firmware version select the even numbered version to choose the large font or the odd numbered version to choose the small font Press Select Enter the Administrator PIN when the Responder asks you to do this the default is 1234 and press Enter The Responder will start updating the firmware The program shows you its progress as it updates When the update is complete the Responder will show you the new version number Press any key to go to the Responder menu or the student PIN entry screen Other Responder Settings To change Responder settings follow these steps Press On Off to turn on the Responder Highlight Settings in the main menu and press Select Use the arrow buttons to highlight the setting you want to change Press Select 4 See the information for the setting you chose in the table below Press Select after changing a setting Setting Description About Shows you the firmware version and connected Receiver name Use the arrows to scroll up and down Contrast Lets you increase or decrease screen contrast using the arrow buttons Search for Networks Searches for the Receivers in range and lets you select one to connect to Assign Owner Reset Lets you assign a student owner change the owner and Owner and Change PIN change the owner s personal identification number PIN For more informa
11. hey turn on session AccelTest shows ID numbers next Renaissance Responders to student names in the Record Book How do students use the Calculator and how can a teacher disable it The Calculator is only available on Responders using 1 x firmware versions see page 5 See page 8 to find out how students use the calculator and how to disable it When would a student use the the question mark button The button serves two purposes Ifthe student wants to scroll to previous questions in an AccelTest assignment possibly to change an answer the student would press and scroll to the question e The button is also used to unlock an owned Renaissance Responder if the student cannot remember his or her PIN To unlock the Renaissance Responder the teacher presses and enters the administrator PIN to see the student s PIN on the screen How do I join an AccelTest session See page 7 When students use their Renaissance Responders they have multiple Renaissance Receivers to choose from and they are all named Renaissance Receiver Why is this happening This means that multiple Renaissance Receivers are within range of the Renaissance Responders and the Receivers have not been given unique names To change the name of a Receiver see page 3 Enter a name that is unique For example if the teacher s name is John Smith give the network the name Smith s Receiver 2Know Classroom Response System
12. installed If the computer must be restarted after installation the program will notify you click OK 5 When the installation is finished click Restart if the computer must be restarted If not click Quit 6 Connect the Renaissance Receiver to your computer and set the Receiver name as described on page 3 7 Open the Applications folder on the computer s hard drive Then open the 2Know Toolbar folder Double click 2Know Toolbar 8 Read the licence then tick the agree box and click OK to start the program Getting Information about Using the Program Once the 2Know Toolbar program is open click Options and choose Getting Started This will open a document titled Using the 2Know Toolbar which explains how to use the program abaut ahoni Tosiba Software Updates Teacher Responder Themes FREQUENTLY ASKED QUESTIONS Below are answers to the most commonly asked questions concerning the 2Know classroom response system For more information please contact us at UK help alphasmart com Questions About the 2Know Classroom Response System Should be concerned about the technical requirements and setup for 2Know All that is required is the AccelTest or 2Know Toolbar software which comes with the 2Know classroom response system and a computer that meets the requirements listed at www renlearn co uk alphasmart_crs_specs html Setup is easy Even those with limited computer experience can
13. k on quizzes tests and formative assessments The system includes a Receiver and Responders that use wireless radio frequency RF technology Renaissance Responder yiv_ NEO 2s can be used W as you would use i Responders If you use NEO 2s you have the option of answering short answer questions as well as multiple choice true false and numeric response questions Students or other groups use the Responders to enter answers to questions sent from the AccelTest software the 2Know Toolbar or Accelerated Maths RP If you are using AccelTest students may also use Responders to complete homework or to see notes from the teacher Each Responder has two AA batteries installed To save battery life Responders shut down after 30 minutes of inactivity but any answers entered before then are not lost Students can usually continue assignments they did not finish Renaissance Receiver The Receiver enables your Responders to communicate with software on your computer The Receiver relays questions to Responder users and transfers responses from Responders to your software so that you can monitor student progress 2Know Classroom Response System Installation and Set Up Guide SOFTWARE USED WITH THE 2KNOW CLASSROOM RESPONSE SYSTEM The 2Know classroom response system may be used with the AccelTest software the 2Know Toolbar or Accelerated Maths RP If you have additional questions or need more informa
14. ks 0 ccc e cnn etre been eee nner nen eenaeeeaees 7 About the Responder Calculator 0 2 cece eee ee eee eee eens 8 Using the Calculators is0 3 3 ovis edie wearer a ag 10 ein E E Cage ate Saree 8 Disabling the Calculator cece cece eee eee e eee neeaee 8 Replacing Responder Batteries 0 eee ee cence eee eee ee eees 9 Checking the Battery Charge 2 ccs eee e eee eee eee e eee ee enneee 9 Installing New Batteries cece cee eee cence eee reece ett e a 9 Installing the 2Know Toolbar 0055 10 Installing on Windows Computers 0 c cece eee eee ee ene eerren 10 Installing on Macintosh Computers 0 cece ec eee ee eee eens 10 Getting Information about Using the Program 22 eee eee eee 11 2Know Classroom Response System Installation and Set Up Guide Frequently Asked Questions 0000008 11 Questions about the 2Know Classroom Response System 11 Questions About AccelTest Software 0 ccc ccc cence eee ne enees 12 Questions About the Renaissance Receivers and Responders 13 Limited Warranty s iis note dow eed Es pce ee Oo achat dee dara Be 16 2Know Classroom Response System Installation and Set Up Guide THE 2KNOW CLASSROOM RESPONSE SYSTEM The 2Know classroom response system encourages student participation and gives teachers instant access to student wor
15. ld last for the entire school year When the batteries need replacing you will see an empty battery icon and the message Batteries are Very Low on the Responder screen Follow the instructions below to check the battery charge and replace the batteries when it becomes necessary Checking the Battery Status Press the On Off button to turn the Responder on 2 If you have assigned the Responder to a student in AccelTest enter the student s Personal Identification Number PIN 3 Press W to scroll down to Settings Press Select 5 About appears at the top of the list press Select The battery status is shown by the darkness of the battery symbol If the symbol is completely dark the batteries are fully charged If not the symbol will be 2 3 dark 1 3 dark or empty as the battery discharges Installing New Batteries 1 Using a small 10 Phillips head screwdriver remove the small screw in the battery compartment cover Remove the cover 2Know Classroom Response System Installation and Set Up Guide 9 2 Remove the old batteries Install two new ones making sure the and ends are oriented as marked in the compartment Put the cover back on the Responder Insert and tighten the screw gt T 4 2 INSTALLING THE 2KNOW TOOLBAR You can download the 2Know Toolbar at www alphasmart co uk After you download it follow the instructions below to install it Installing on Windows Computers C
16. ortant if your school has more than one Renaissance Receiver because Responder users will need to choose a Receiver from a list You can also change the Administrator Personal Identification Number PIN which is used as the password for the utility that you use to change the Receiver name and other settings The Administrator PIN is also required for changing ym The Renaissance settings on the Responder Follow these steps ADI Wireless Server Utility is installed 1 Open the Renaissance Wireless Server Utility with the software mentioned in the previous section e Windows computers Click Start Programs gt Renaissance Wireless Server gt Renaissance Wireless Server Utility 2Know Classroom Response System Installation and Set Up Guide 3 tv Renaissance Place W Settings button You will also have a Renaissance Place Settings button if you have NEO Manager installed This button is for setting the Renaissance Place URL if you are using the NEO 2 Accelerated Reader SmartApplet For details see the NEO User Manual e Macintosh computers In your computer s Applications folder open the Renaissance Wireless Server folder Then double click Renaissance Wireless Server Utility Type 1234 and click OK to log in This is the default Administrator PIN If you have changed the PIN enter your new PIN If necessary click Start Click the Server Settings tab Enter a new name in the Network Name field Make sure
17. s come with batteries Yes Each Renaissance Responder comes with two AA batteries which may last more than a school year even with heavy use Do the Renaissance Responders have an automatic shut off feature Yes Renaissance Responders will shut off after 30 minutes of inactivity Is student work saved when the Renaissance Responder is turned off Yes What is the default administrator PIN Responders and the Renaissance Wireless Server Utility The default administrator PIN is 1234 How do I change the administrator PIN See page 3 What is the default student PIN for an owned Renaissance Responder The default student PIN is 1212 How do I assign owners to Renaissance Responders reset owners or display or change a student PIN See page 7 2Know Classroom Response System Installation and Set Up Guide 13 What do do if a student forgets his or her PIN 1 Press and join the session 2 Enter the administrator PIN default is 1234 and press Enter The student s name and PIN will be displayed What are the differences between owned and shared Renaissance Responders Owned Renaissance Responders Shared Renaissance Responders Each one has one owner and Can be shared among students cannot be shared Homework and Notes features are Homework and Notes features are disabled enabled Students enter PINs default is Students enter ID numbers when they join a 1212 when t
18. s or other economic loss are expressly excluded 2Know Classroom Response System Installation and Set Up Guide 16 Note This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help FCC Caution Any changes or modifications not expressly approved by Renaissance Learning could void the user s authority to operate the equipment This device complies with part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device ma
19. tent Yes AccelTest comes with many pre loaded items covering Maths Science English Geography and History Can we use existing paper assignments in AccelTest Yes Simply create a Score Key so that students can take the assignments using Responders and their responses can be instantly marked Can questions be imported from other non AccelTest databases There are two ways to include additional content copy and paste questions from any existing assignment or quiz or import assignments from one AccelTest database to another Can I share assignments quizzes with other teachers who have AccelTest Yes AccelTest software is designed to leverage a group effort Educators could divide up a textbook or content area enter in their assignments and quizzes and then merge the files into one large database Once assignments and quizzes have 2Know Classroom Response System Installation and Set Up Guide 12 been created they can easily be saved and used over and over again or exported and sent to other users How many students assignments questions can I have in my AccelTest database You may have an unlimited amount of students assignments and questions in your database Can use my Accelerated Maths libraries in AccelTest Yes you can use desktop Accelerated Maths libraries For more information refer to the AccelTest User Manual Questions About the Renaissance Receivers and Responders Do Renaissance Responder
20. tion see page 7 Security Lets you enter the encryption key if it is required for communication with the Receiver Contact Renaissance Learning for more information Firmware Update Lets you choose another firmware version or update to a newer version See page 5 2Know Classroom Response System Installation and Set Up Guide 6 Responder Key Tasks Turning On Off 1 To turn on press the On Off button and hold it down until the Responder is on 2 To turn the Responder off press the On Off button Joining a Session AccelTest or the Toolbar must be open Highlight Join Session and press Select 2 Ifthe Renaissance Responder asks to stay connected to the chosen Renaissance Receiver press Yes or No and Select If you chose No or if the Responder simply lists the Receivers highlight the correct Renaissance Receiver and press Select Assigning Owners to Renaissance Responders Open the AccelTest software and verify that students are enrolled in classes Turn on the Renaissance Responder and join the session 1 2 3 Highlight Settings and press Select 4 Highlight Assign Owner and press Select 5 Enter the student s ID number found next to the student s name in the AccelTest Record Book and press Enter Changing a Student PIN for Owned Responders Enter the student PIN default is 1212 and press Enter Highlight Settings and press Select Highlight Change PIN and press Select A ORP S Enter a
21. tion you can email us at UK help alphasmart com AccelTest Software ue The 2Know AD classroom response system works with one program at a time If you are using the system with more than one program such as AccelTest and Accelerated Maths RP the Receiver and Responders will recognise the program that you started first 2Know Toolbar Using AccelTest software you can create your own quizzes tests and assignments for any subject and mark student responses quickly Students can complete some types of assignments using Responders the scores are entered automatically in the AccelTest Record Book Refer to the AccelTest User Manual that is installed with the software If you plan to use the system with AccelTest software you can install it from the UK Software and Manuals CD included with the classroom response system You can also download the software at www renlearn co uk login_crs php For installation instructions refer to the AccelTest Software Installation Guide This simple program lets you get real time responses from Responder users You can ask multiple choice true false numeric response pulse or short answer questions This can help you immediately assess whether your Responder users understand the concepts you have been discussing If you plan to use the 2Know Toolbar you can install it from the UK Software and Manuals CD included with the classroom response system or you can download it from our Website at
22. ts Ns a Double click the 2Know _Toolbar_2 0_Win msi file that you downloaded In the installation Wizard that opens click Next gt on the Welcome panel Note the installation location and click Next gt on the next panel Click Install on the next panel If you want to start the 2Know Toolbar right away tick the Launch 2Know Toolbar box Click Finish to complete the installation A message may appear to tell you that you must restart your computer for the configuration changes to take effect Click Yes if you want to restart the computer now or No to restart it later Connect the Renaissance Receiver to your computer and set the Receiver name as described on page 3 Make sure that neither AccelTest nor the Renaissance Responder program are running Then start the 2Know Toolbar by clicking Start Programs gt 2Know Toolbar gt 2Know Toolbar Read the license then tick the agree box and click OK to start the program Installing on Macintosh Computers 1 Double click the 2Know _Toolbar_2 0_Mac dmg file that you downloaded 2 Double click 2Know Toolbar Installer in the window that opens 3 Enter the administrator user name and password for the computer and click 2Know Classroom Response System Installation and Set Up Guide OK If you are not the administrator you may or may not have rights that allow you to install the program 10 4 Click Install in the installation assistant The program will be
23. ubtract multiply divide and calculate percentages To start the calculator students highlight it in the main menu and press Select The student must also be connected to a Receiver to use the calculator Using the Calculator Within the calculator students use the letter keys to choose whether to add subtract multiply or divide and they press Enter for For example to add 1 2 a student would press 1 A for 2 and Enter Disabling the Calculator If you do not want students to have access to the calculator while they are working on assignments quizzes or tests you can turn it off for all Responders that are connected to your Receiver Follow these steps 1 Open the Renaissance Wireless Server Utility e Windows computers Click Start Programs gt Renaissance Wireless Server gt Renaissance Wireless Server Utility e Macintosh computers In your computer s Applications folder open the Renaissance Wireless Server folder Then double click Renaissance Wireless Server Utility 2 Type 1234 and click OK to log in This is the default Administrator PIN If you have changed the PIN enter your new PIN Click the Device Settings tab Remove the tick from the box next to the calculator Click Update Device Settings Qe OV oP Click OK when the settings have been updated 2Know Classroom Response System Installation and Set Up Guide 8 Replacing Responder Batteries High quality alkaline batteries shou
24. ware Versions 3 XX installed version What Is Included Ability to communicate with AccelTest the 2Know Toolbar or Accelerated Maths RP Support for owned Responders Homework and Notes AccelTest Settings Synchronising AccelTest Ability to answer short answer questions in AccelTest or the 2Know Toolbar What Is Not Included Calculator Small or large font based on firmware selected 1 XX Ability to communicate with AccelTest the 2Know Toolbar or Accelerated Maths RP Support for owned Responders Homework and Notes AccelTest Settings Synchronising AccelTest Calculator Small or large font based on firmware selected Ability to answer short answer questions in AccelTest or the 2Know Toolbar To switch versions or update to a newer version follow these steps on each Responder Press the On Off button to start the Responder 2 Ifthe Responder asks for the Student PIN because it has an assigned owner press Then press yes True and then Enter to stay connected to the current Receiver server Enter the Administrator PIN 1234 is the default and press Enter Then press any key 3 Press W to scroll down to Settings and press Select 2Know Classroom Response System Installation and Set Up Guide Press W to scroll down to Firmware Update and press Select 5 If the Responder asks if you want to stay connected to the Receiver press yes and then Enter 6 The Respond
25. www alphasmart co uk Then see the installation instructions on page 10 For more information about the program click the Options button in the 2Know Toolbar program and choose Getting Started Accelerated Maths RP You can also use the Renaissance Receiver and Responders with the Renaissance Place version of Accelerated Maths Students can complete assisted response assignments from Accelerated Maths using Renaissance Responders You will need to install the Renaissance Responder client program available in Renaissance Place For more information about installing this program and about how students can use Responders refer to the Accelerated Maths Software Manual To find this manual click Manuals in the upper right corner of any Accelerated Maths or Renaissance Place page 2Know Classroom Response System Installation and Set Up Guide SETTING UP THE RENAISSANCE RECEIVER Connecting the Renaissance Receiver to Your Computer Connect the square end of the USB cable into the back of the Receiver Connect 1 _ Do not take the the flat end of the cable to your computer Receiver apart The Receiver does not require batteries and it has no controls inside The Receiver gets the power it needs from your computer Naming the Receiver and Changing the PIN Set a unique name for each Renaissance Receiver you own so that your Responder users know they are connecting to the correct Receiver This is especially imp
26. y not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation The Renaissance Responder and Renaissance Receiver have been tested to and comply with the following standards FCC Rules and Regulations CFR 47 Receivers and all other Unintentional Radiators Part 15 subpart B 15 107a amp 15 109a FCC Rules and Regulations Intentional Radiators Operational in the 912 928 MHz 2400 2483 5 MHz 5725 5875 MHz And 24 0 24 25 GHz Bands Part 15 Subpart C Section 15 249 Low Power License Exempt Communications Devices All Frequency Bands Radio Standards Specification RSS 210 Issue 5 November 2001 Industry Canada Radio Standards Specification RSS 210 Issue 5 November 2001 Low Power License Exempt Radio Communication Devices All Frequency Bands Receivers R amp TTE Directive 1999 5 EC Transmitter and Receiver EN 300 400 2 emissions and immunity EN 301 489 1 17 emissions and immunity Renaissance gt Learning Advanced Technology for Data Driven Schools For more information visit our Website at www alphasmart co uk A
Download Pdf Manuals
Related Search