PASECO ELECTRONIC BIDET
Contents
1. The instructions concerning persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge and children playing with the appliance are not applicable WARNING f unusual smell comes out of the product unplug the power cord and contact the place of purchase or the Service Genter e There may be danger of electric shock NO Do not attempt to disassemble repair or Modify the product t may cause electric shock or fire or damage the product Call the Service Center for any repair works No disassembling elise neutral cleaner for cleaning and do not use acid or alkaline cleaner e t may cause decolorization discoloration or deformation Do not step on the toilet cover or place heavy objects on it e he cover may break down causing injury 9 NO Do not pul the connection pipe or water supply hose by force e f water is flowing into the product it may f the product has not been used for a prolonged pened operate the cleansing or bidet process 2 to 3 times before use Degenerated water may cause physical damage Call the Service Center if repair work is necessary 2 3 times Wways use water from water service for installation e Using industrial water or waste water may cause skin damage or diseases 9 NO Children old or feeble person or heavily drunk p2. of the water supply valve Bidet is not blocked e No water supply perhaps e f the Bidet is used for the first time after the installation it takes 1 2 minutes until the water fills the tank before it begins to flow out Water stream is very weak e Check the indicator lamp to see if the water pressure setting is too low Open the filter cap and check the filter e Close the other water taps to improve the water flow Warm water is not warm enough e sn t the WATER TEMPERATURE button set to OFF e Water leaks Fasten the connection of the water supply hose again e Check all the connection parts Especially see if any rubber stopper is missing Warm air or the toilet seat is not warm enough e sn t the temperature adjustment button of DRYER or TOILET SEAT set to OFF e Water drips while not in use e f the water in the warm water tank is heated up it expands and seeps through the nozzle e Water spray activated before and after the use is to clean the nozzle and is normal e Can not operate with the Control Panel Aren t you sitting on the edge of the toilet seat Failure of SEAT SENSOR e Sit again slightly moving toward back SPECIFICATIONS Automatic Cleansing amp Drying Toilet 483 width x 530 depth x 137 height ANAL CLEANING Max 1 1min Water Stream Angle 55 Self cleaning Type Max 1 3min Water Stream Angle 55 Self cleaning Type Move and Massage Functions Posi
3. a WARRANTY es Product Name Warm Water Bidet Date of Purchase Model Name Telephone PB X5500 Xime PASECO ELECTRONIC BIDET XIME User Manual PB X5500 Customer Service Office Hours 09 00 18 00 Mon Fri For any questions please call us Please read Notes on Safety before you start to use this Bidet and use it appropriately After reading this manual please keep it where it can be reached easily by everyone The design and the dimension of this Bidet may change without notice in order to improve its quality IMPORTANT SAFEGUARDS CONTENTS When using electrical products especially when children are present basic safety precautions should always be followed including the following OO ea READ ALL INSTRUCTIONS BEFORE USING UJ HOW TO CLEAN 4 NDANGER D O UJ GROUNDING INSTRUCTIONS 5 To reduce the risk of electrocution D D 1 Always unplug this product immediately after using C O Do not use while bathing eb D NOTES ON SAFETY 6 9 Do not place or store product where it can fall or be pulled into a tub or sink C Do not place in or drop into water or other liquid o FEATURES 10 11 Do not reach for a product that has fallen into water Unplug immediately D CONTROL PANEL AND ADJUSTMENTS 12 WARNING To reduce the risk of burns electrocution fire or injury to persons NAME OF PART 13 14 0 S 3 Close supervision is nec
4. ble plugging may cause fire e t may cause electric shock e f the power cord was A RNC damaged have it repaired SWR by a professional or call our Service Center and do not i attempt to repair or modify it yourself esr eJoJeg e Prevent the Control Panel from contact with water Do not spray water on the product or use e t may cause fire or electric shock in excessively damp place e f seeped into the control panel Z e t may cause fire or pull out the plug and contact electric shock the place of purchase or the Service Center and v No contact with water follow the instruction EA No contact with water Do not block the warm air outlet with hand Do not throw liv cigarette or other burning Blocking the air flow may object in the toilet cause fire due to internal e t may cause fire overheating NO NO When the product is removed unplug the Always unplug the power cord first before power first cleaning Otherwise it may e Otherwise it may cause cause electric shock electric shock This appliance is no intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety Children should be supervised to ensure that they do not play withe the appliance Modification
5. d or backward to one of 5 positions of your choice SEAT TEMPERATURE button Use this button to select one of 4 levels of toilet seat temperature If you do not want to use Seat Sensor press Seat Temp button for 3 seconds This function allows small kids to use the product POWER SAVING button POWER CORD Check the power supply 230 50Hz before connection xlf an ungrounded consent is used ground it first SEAT COVER SHOWER NOZZLE For anal cleaning antibiotic resin gJ D ling O A D C o D BIDET NOZZLE For feminine hygiene antibiotic resin CONTROL PANEL For cleansing bidet and dry functions and for adjustments of temperature water pressure and 1102210 HEATED SEAT Seat is heated for comfortable use In winter A antibiotic resin e Parts Accessories x Replaceable water filter is a consumable part They are available from authorized service agents Replacement Interval Approx 6 month if general water supply is used It may vary depending on the quality of water WATER OUTLET If the product is not going to be used for a prolonged period or removed for reinstallation pull out the power plug and open this water outlet to drain WARM AIR OUTLET Warm air exits through this outlet during drying operation the water MOUNTING PLATE DETACH COUPLING MOLD BUTTON After installing the Mounting Press this button to Plate on the toilet c
6. does not completely turn the product off but maintains the temperature of warm water and the seat at The Seat Temperature Lamp lights up and seat heating begins 25 X Every time the button is pressed the position of the Seat return to the set temperature x f the power plug has been pulled out or power failure occurred all settings are cancelled They should be reset Pressing the POWER SAVE button again will automatically Re TID ELORURECUIDIOR OR Lali Sui SEAT TEMP During 3secon 1 Pull out the plug from the power 2 Close the water supply valve outlet Disconnect the Bidet Hose from the T Valve and connect the water tank hose directly to the water tap 3 Detach the product by pressing the 4 Open the drain cap on the side and DETACH button on the side drain the water completely Use a container of larger than c i 1 5 liter capacity S Prevention of freezing 1 Check if the power plug is firmly in place in the power outlet 2 Adjust the temperature using the WATER TEMPERATURE buttons on the Control Panel e Heating the Warm Water Tank will prevent the water from freezing e f the toilet room is not heated wrap the connecting pipes or use another heater e Can not operate the Bidet at all els the power plug not loose Power failure perhaps e No water stream e Check if the water supply valve water tap is open els the nozzle not blocked e Check if the water filter
7. duced physical sensory or mental capabilities or lack of experience and knowledge and children playing with the appliance are not applicable Water Outlet and Filter D Close the water supply valve Press the DETACH button and pull the product forward Detach the filter section of the water supply valve at the back of the Bidet and clean the filter using a soft brush to remove foreign matters Accumulation of foreign matters will cause reduction of Sprayed water through the nozzles Exterior Use soft sponge or cloth and neutral detergent for cleaning Detach the toilet seat by pulling the stub for detaching Q Nozzles Keep nozze adjustment button toward Fffront pressed for 3 seconds then nozze assembly will come out And nozzle assembly automatically returns in 1 minutes Hold the end of nozzle and pull out Clean with a soft brush Be careful not to damage holes on nozzle After cleaning press Stop button then nozze assembly will be hidden under the seat GROUNDING INSTRUCTIONS This product should be grounded In the event of an electrical short circuit grounding reduces the risk of electric shock by providing an escape wire for the electric current This product is equipped with a cord having a grounding wire with a grounding plug The plug must be plugged into an outlet that is properly installed and grounded DANGER Improper use of the ground
8. e is reached Check if the seat becomes warmer amp SEAT SENSOR Check This Bidet operates only after the Seat Sensor detected person on the seat use the product when fully seated e Children need guidance from the parent to sit on the center of the seat x After completing the checks 4 through b remove the sensor label from the seat Check if the sensor works by pressing CLEANSING or BIDET button The sensor is working normally if no water flows out after the sensor was removed This Bidet can not be operated if additional child toilet seat is placed on the seat esf CLEANSING Operation for Anal Cleaning BIDET Operation for Feminine Hygiene 1 Press SHOWER button while sitting on the toilet seat z 1 Press BIDET button while sitting on the toilet seat The Bidet Lamp lights up and spray of water jet begins The Cleansing Lamp lights up and spray of water pt begins xe on TOWER Operation lasts for 1minutes and 30seconds Operation lasts for 1minutes and 30seconds Position the nozzle using the NOZZLE POSITION buttons x Position the nozzle using the NOZZLE POSITION buttons x Adjust the water strength using the WATER PRESSURE buttons x Water stream is softer and sprays wider area X Adjust the water strength using the WATER PRESSURE buttons Press MOVE button Cleansing continues while the nozzle moves back and forth 5 X The nozzle movement will last throughout the d
9. erson Must be accompanied by an adult for use e To avoid low temperature burn set the temperature to Low and do not let the person use for a prolonged time Beware of low temperature bum from toilet seat or warm drying air If any of the following persons uses the product someone close by must take care by setting the temperature to Low etc A child or a person who is old has delicate skin can not adjust temperature on his her own is under influence of sleeping pills or cold medicine etc or is heavily drunk or extremely tired e Contact of skin with the toilet seat for a prolonged time may cause low temperature burn Using warm air drying on the same spot of skin for a prolonged time may cause low temperature burn N CAUTION Use the grounded AC 120V 60Hz outlet Do not install the product where direct sunlight reaches matching with the power plug UJ e Otherwise it may cause SATA elt may cause electric shock when decolorization and D breakdown or short discoloration O circuit occurs e f your electric outlet D does not have o grounding terminal C consult an electric o specialist Grounding D Do not rub the control parel or seat with Do not use the product when it does not dry or rough cloth function properly e The surface of the product may lose luster e t may cause fire or electric shock e Have it repaired and use when it works normally NO NO Pul
10. essary when this product is used by on or near children or invalids Use this product only for its intended use as described in this manual Do not use attachments not recommended by the manufacturer Never operate this product if it has a damaged cord or plug if it is not working properly if it has been dropped or damaged or dropped into water INSTALLATION 15 17 Return the product to a service center for examination and repair Keep the cord away from heated surfaces Never block the air openings of the product or place it on a soft surface such as a bed or couch C HOW TO USE 18 21 where the air openings may be blocked Keep the air openings free of link hair and the like D 6 Never use while sleeping or drowsy 7 Never drop of insert any object into any opening or hole STORING 22 8 Connect this product to a properly grounded outlet only See Grounding Instructions SAVE THESE INSTRUCTIONS ITEMS TO CHECK BEFORE REQUESTING A SERVICE 23 24 This appliance is no intended for use by persons including children with reduced physical sensory or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety SPECIFICATIONS 29 Children should be supervised to ensure that they do not play withe the appliance Modification The instructions concerning persons including children with re
11. ing plug can result in a risk of electric shock If repair or replacement of the cord or plug is necessary do not connect the grounding wire to either flat blade terminal The wire with insulation having an outer surface that is green with or without yellow stripes is the grounding wire Check with a qualified electrician or serviceman if the grounding instructions are not completely understood or if in doubt as to whether the product is properly grounded This product is for use on a nominal 230V circuit and has a grounding plug that looks like the plug illustrated in sketch A in following figure A temporary adaptor which looks like the UJ D h O D o D adaptor illustrated in sketches B and C may be used to connect this plug to a 2 pole receptacle as shown in sketch B if a properly grounded outlet is not available The temporary adaptor should be used onlyuntil a properly grounded outlet can be installed by a qualified electrician The green colored rigid ear lug and the like extending from the adaptor must be connected to permanent ground such as properly grounded outlet box cover Whenever the adapter is used it must be held in place by the screw The following instructions are intended to help you use this Bidet safely and correctly in order to prevent unexpected danger or damage So please observe them The safety related instructions are indicated as shown below depending on the degree of danger
12. l out the plug when not in use for a Do not push the buttons by force prolonged period elt may cause breakdown Do not slam down the cover to shut it Do not place any liquid container with its e It may cause damage content in it e f liquid seeps into the product it may cause electric shock NO NO x Caution Please do not slam down the seat or cover It may cause breakdown m DD CX FEATURES In addition to cleansing bidet and drying functions this Bidet also has the following features TWIN NOZZLES Q ANTI SLAM DESIGN e Separate cleansing nozzle and bidet nozzle e The seat and the cover close softly enhances hygiene e You can adjust the position of the nozzle e The nozzle moves forward and backward to your choice during cleansing or bidet operation Q HEATED SEAT Q TEMPERATURE ADJUSTMENT e The heated seat ensures comfort even in e You can adjust the temperature of water winter and the seat to your choice WATER FILTER SEAT SENSOR e Water filter makes water even cleaner e During bidet operation a sensor Connect in the right direction automatically detects when someone sits on the seat preventing operational error f you do not want to use Seat Sensor press Seat Temp button for 3 seconds This function allows small kids to use the product esf eJoJeg DEODORIZATION O DRYER e Semi permanent catalysis deodorizer keeps 4 step dry fu
13. nction is available after using the air fresh cleansing or bidet function WATER PRESSURE Q POWER SAVE ADJUSTMENT Instead of turning the power completely off this function maintains the water and e 5 levels of water pressure seat temperature at 25 C 77 F maximizing are available for your power saving choice WATER PRESSUnc BIDET SHOWER This is for feminine hygiene his is for anal cleaning SHOWER CHLD MASSAGE button Periodically spray strong and or weak water DRYER button Use this button to select one of 4 levels of drying air temperature WATER PRESSURE buttons Use these buttons to adjust water pressure WARM WATER TEMPERATURE 2 button E Use this button to WATER PRESSURE select one of 4 levels of warm water LO ME Hi temperature O O O WATER WD DEODORIZATION O button DEODORZER Use this button to turn on off the deodorization function SHOWER CHILD d E e X A O o D O v x NOZZLE POSITION LO ME HI 650 SEAT TEMP During 3seconds e PB X5500 STOP button Press this button to stop operation SHOWER CHILD button Use this button to select the nozzle for anal cleaning BIDET button Use this button to select the nozzle for feminine hygiene MOVE button Use this button to move the nozzle forward or backward NOZZLE POSITION buttons Use these buttons to move the nozzle forwar
14. or damage and its urgency that may arise from inappropriate use Mark Meaning N WARNING Serious injury or death may occur if used inappropriately CAUTION Light injury or product damage may occur if used inappropriately This mark requests your attention to certain circumstances or operation that may lead to a danger Whenever this mark appears read carefully and follow the instructions to prevent danger The types of instructions that must be observed are indicated by signs as follows N e These marks indicate actions that you must not do o as These marks indicate actions that you must do WARNING This Bidet must be grounded to prevent short circuit or electric shock Non grounding may cause breakdown or electric shock The plug of this Bidet has built in ground Always use matching outlet e Do not use the same consent with other e Do not pul out the plug by pulling the electric heating appliances exceeding the power cord alowed voltage rating lt may damage cause elt may be overheated short circuit of electric and cause fire w shock due to damage NO NO Do not touch the power cord with wet Do not use the damaged power cord or hand plug e t may cause electric shock elt may cause short circuit or electric shock NWARNING Gheck for any dust on the power cord and ePul out the power plug when thunderstom push the plug until it sits firmly and lightening exist e Unsta
15. ouple it in detach the Bidet from here the toilet the Parts Accessories xUse a pressure pump when the product is installed in the place where supplying water pressure is low The matching pump should be purchased separately e Close to the water tank of the product e Remove the existing toilet seat by loosening the bolts at the bottom e Store 1 Preparation the water supply valve connected the removed seat 2 Installation of the Mounting Plate Plce the Mounting Plate on the tollet Align the holes in the Mounting plate with the holes in the toilet and insert the fastening bolts with bolt stoppers from Note EB above The adjustment allowance of Mounting Plate positon is 140 200mm along sideways and 40mm back and forth 3 Connection of Hoses and installation of Main Body 4 Power Connection and Water Valve Test Water Leakage Check e Before connecting the power open the water valve and see carefully Check if the existing water valve is if there is any leakage of water propery closed and detach the water tank hose of the toilet from the existing water tap Connect the T Valve to the water tap Insert rubber stopper Connect the detached water tank hose of the toilet to the T Valve Connect the Water Filter to the T Valve CLICK Mount the Main Body to the Mounting Plate as show in the picture un
16. til it clicks into position Connect the Bidet Hose to the Water Filter and the Main Body v Fasten the rubber Stoppers firmly at the connection points zd Note This Bidet will be installed in place by one touch sliding action A slight looseness d may occur in some installations but it is normal O Before Test Operation 5 Test Operation b DEODORIZATION Check Check if air blows out fom the lef side back of the Main Body 2 CLEANSING and BIDET Functions Check x Press GLEASING or BDET button As this Bidet uses a water storage tank pressing the CLEANSING button for the first time after the installation will cause delay of 1 2 minutes until the water fills the water tank and fows out through the nozzle Check if water flows out of the nozze after 1 2 minutes Check if there is any leakage of water from the Main Body Press the WATER PRESSURE button and check if the strength of water spray responds Check if the temperature of the water from the nozzle is approprate by feeling the water with hand lightly touching the nozze end Check if operation stops by pressing the STOP button 3 DRY Function Check Check if warm air blows out from night side of the nozzle by pressing the DRY ER button Check if operation stops by pressing the STOP button Location of SEAT SENSOR hidden inside HEATED SEAT Function Check t takes about 5 minutes until desired temperatur
17. tion Adjustment WARM WATER PRESSURE 5 level adjustment each of Anal Cleaning and Bidet Very WATER TEMPERATURE Weak Weak Medium Strong Micom Control CLEANSER 4 level adjustment OFF Low 34 C Medium 37 C High 40 C ADJUSTEMENT POWER CONSUMPTI OWER CONSUMPTION OF 900W WATER HEATER TANK CAPACITY 1 15 liter 4 level adjustment OFF Low 34 C Medium 38 C High 40 TOILET ADJUSTMENT SEAT POWER CONSUMPTION TEMPERATURE ADJUSTMENT POWER CONSUMPTION OF HEATER DEODORIZER X f the water pressure is lower than 0 7kgf coi 10psi nozzlees may not fully extend or water stream wil be weak The same model equipped with intemal water pump is available from the factory 4 level adjustment Room Temp Low 35 j Medium 40 C High 45 C
18. uration of met Cleansing operation Press MOVE button Position the nozzle using the backward and forward a Cleansing continues whikb the nozzle moves back and forth adjustment buttons d o x The nozzle movement will last throughout the duration 8 O8 of Bidet operation Position the nozzle using the backward and forward adjustment buttons Press DRYER button n c Drying is quicker if you wipe the wet area lightly with gr D tollet paper before using this function Operation lasts for 3 minutes Press DRYER button Drying is quicker if you wipe the wet area lightly with toilet paper before using this function Operation lasts for 3 minutes Press STOP button All functions have set duration of operation but pressing the START button in the midde of use will stop all the functions imme diately Press STOP button All functions have set duration of operation but pressing the If water drips from around the nozzle START button in the middle of use will stop all the functions immediately DEODORIZATION function stops automatically without The water in the water tank heats up and expands while warm faune to tise the button water function is used The excessive water caused by expansion or the water left in the nozzle may seep out of the nozzle but it is normal Massage Deodorization It is recommended to people having costiveness Press DEODORIZATION button
19. while in operation Deodorization Lamp lights up and deodorzation begins DEODORIZATION starts immediately when the button is pressed while sitting on the seat x Pressing the DEODORIZATION button again will stop the Do press Massage button or Shower or Bidet Lamp for Massage is on and start with strong and or weak cycle periodically DEODORIZATION after 5 minutes from the start of its operation x DEODORIZATION does not stop by pressing the STOP button x Using the DRY function during DEODORIZATION suspends the DEODORIZATION while DRY operation lasts If you press Massage button again it will return to Shower and or Bidet Adjustment of water pressure Warm Water While the water is being sprayed Press High or Low button Press WARM WATER button Warm Water lamp lights up and heating of cleansing water begins X Every time the button is pressed the position of the Warm Water Temperature Indicator Lamp shifts esf Initial pressure after the installation is High X If water does not flow due to low water pressure set to High using the adjustment button WATER PRESSURE Power Save Q POWER SAVE function saves the cost of electricity by keeping the warm water and the toilet seat at low temperature Toilet Seat Press POWER SAVE button while in operation Power Save Lamp lights up and power saving mode begins iL Press SEAT TEMPERATURE button X POWER SAVE function
Download Pdf Manuals
Related Search