Swegway r1
Contents
1. SR After switching on your ISwegway You will hear a confirmation sound indicating the Bluetooth is ready Have your Bluetooth device ready let s say you are trying to connect the Bluetooth on your phone to the iswegway Check your phone has Bluetooth switched on Use your phone to search for new devices and the iswegway should appear as F008 or similar Once it has recognised and connected the iSwegway will appear connected on your Bluetooth device Now select the music you want to listen to and you are connected com A FIRST TIME ON A SWEGWAY BOARD Hold on to something i e to a person or a fixed object perhaps try holding on to a kitchen work surface Once on with both feet stand still and allow your board to Balance before you move The secret to your success is to make sure you can stand still on your board Now lean slightly forward and press lightly on the front of the pedals and you willstart to move forward Drop your heels and therefore the opposite applies you will move backwards Just try to move forward and backward while holding on gt To rotate on the board press one pedal forward and one backwards whilst taking care to stay balanced on the Try moving forward slowly now Keep holding on to someones hand till your confidence grows With a bit of patience and practice you will master it in no time Most people can start moving with confidence in under an hour some peop2. SWeGwaY om Ouick Setup and Troubleshooting Guide For use with all Classic 6 Bluetooth 6 and Bluetooth 8 boards COM BB IN YOUR BOX YOU SHOULD HAVE Your iSwegway board UK CE 3 pin charger User manual Remote if applicable 6 0 Before we post any Swegway boards we test each one to ensure they are in working condition gt All of our Swegway boards undergo testing in clean dust free designated spaces and are wiped down and packaged carefully for our customers gt We also check and test the charger to ensure it is fully operational e me ee ee ee e G N Note all of our boards come with UK CE 3 pin chargers We do not supply non UK chargers BE THINGS YOU SHOULD DO Y Charge for 2 hours before riding Y Set your board on flat ground before riding ef Get on one foot at a time ef Get off one foot at a time ef Be patient and calm Wear protective clothing Y Ride in a safe place free from hazards Y Stop completely before getting off Y Ride on level ground S Be aware of surroundings J THINGS YOU SHOULD NOT DO 3 Jump on the board SC Jump off the board SC Ride through water SC Tow your board 3 Remove the casing warranty void gt Ride at high speeds for long periods of time x Do not leave charger running for prolonged period of time SweGWaY com BLUETOOTH FUNCTIONALITY m APPLICABLE TO BLUETOOTH MODEL BOARDS ONLY
3. ff button on the side of the board The other buttons are redundant and have no functionality Some boards come with a locking feature which allows you to remotely lock the board so it is not able to be ridden
4. le pick it up in just 5 minutes E y The battery in your board is Samsung or LG lithium ion and is of the highest quality available When you order your board we will state whether it is fitted with a Samsung or LG battery When new it may take up to twenty re charge cycles for it to reach its full capacity we recommend using and recharging fully each time do not leave charging overnight BE RECALIBRATION GUIDE How do I reset or rebalance my board Your board from time to time may need a reset this is easy to do 1 Charge the board for two hours The charger has a red light on it which illuminates when plugged in this red lightwill turn to green when fully charged 1a Then unplug the charger 2 Turn off the board and make sure the tops of both sides of the are level If it is working fine both lights should be green on the top and your board should work If just one green light it needs rebalancing SwecwayY com 3 Turn off the board 4 Hold down the on button for 30 seconds The lights should come on the board and start flashing Let them continue for 30 seconds 5 Turn off the board 6 Turn it back on again two green lights on the top All done How do use the Keyfob The remote control is the key fob in the box Although this has four buttons its used for just turning the board on and off to save you having to bend down Alternatively if you prefer you can use the silver on o
Download Pdf Manuals
Related Search