Home

Wireless Display Media Player SB-06WC

1. System Security Settings password How to change settings 1 Select the setting with the A W buttons on the remote control and press the SET button to display the setting 2 After selecting the setting press the SET button again to change the setting 3 Press the SET button after selecting Done at the bottom right of the screen to save the setting NOTE elf the OPTION MENU button or EXIT button is pressed and the screen changes before the setting is confirmed the changes in the setting will be cleared How to operating the software keyboard Settings General Language English Date German Deutsch Time French Francais Start up mode Italian Italiano Splash screen Spanish Espa ol Swedish Svenska Japanese 82518 A software keyboard will be displayed when entering the adapter name in the Intel WiDi settings There are 3 software keyboard screens Follow the instructions below to enter the changes 1 Use the A W buttons on the remote control to align the focus on the characters you wish to enter and press the SET button to display that character in the input area of the setting menu 2 Select enter and press the SET button to confirm the input The meaning of keys other than English characters and symbols are as follows eABC Change to the input screen for capital letters eabc Change to the input screen for small letters 2123 Change to the input scr
2. Drive ID In order to prevent the use memory devices other than the designated SD memory card or USB memory a drive ID can be set for the SD memory card or USB memory Upon setting a drive ID the product will no longer recognize memory devices other than the SD memory card or USB memory that is written with the designated drive ID A drive ID is designated with a 8 digit number No drive ID is set when the product is first shipped from the factory Setting Method 1 Upon selecting Drive ID the following menu is displayed New Drive ID eConfirm Drive ID 2 Select New Drive ID Enter a 8 digit number after pressing the SET button and then press the SET button again 3 Select Confirm Drive ID Enter the same 8 digit number entered in 2 above after pressing the SET button and then press the SET button again 4 Select Done at the bottom right of the screen and press the SET button to confirm the drive ID 5 Media initialization is carried out in order to write the Drive ID set in the product to the SD memory card or USB memory Refer to 3 5 2 Initialization on the initialization method NOTE elf the OPTION MENU button or EXIT button is pressed and the screen changes before the drive ID is confirmed the entered drive ID will be cleared e To cancel the drive ID setting leave the entry fields in New Drive ID Confirm Drive ID blank and press the SET button after selecting Done at the bottom right of the s
3. 30 3 5 System Settings System Security settings media formatting product firmware update and initialization of product settings etc are performed Select System from the main screen of the setting menu for the setting screen P E 0 Security Format Update FW 3 5 1 Security Settings System Security Password for setting menu Settings password The Settings menu in the home screen can be pius protected by a password A 4 digit number is specified for the password No password is set when the product is first shipped from the factory Setting Method 1 Select Settings password and press the SET button to display the following screen New Password Confirm Password 2 Select New Password Enter a 4 digit number after pressing the SET button and then press the SET button again 3 Select Confirm Password Enter the same 4 digit number entered in 2 above after pressing the SET button and then press the SET button again 4 Select Done at the bottom right of the screen and then press the SET button to confirm the password NOTE elf the EXIT button or OPTION MENU button is pressed and the screen changes before the password is confirmed the entered password will be cleared e To cancel the password setting leave the entry fields in New Password Confirm Password blank and press the SET button after selecting Done at the bottom right of the screen The password setting will be canceled
4. Automatic play mode settings Display Time 20 Seconds Transition type None Transition time 3 Seconds Content Aspect Normal Audio selection Image AV Item Settings Media Player mode Sets the playback mode of the media player Settings 1 Manual manual play mode Start manual playback after selecting the contents 2 Auto SD card auto play mode Media Player is selected in the home screen the contents inside the Contents folder of the SD memory card will be played automatically Media Player is selected in the startup mode settings the contents inside the Contents folder of the SD memory card will be played automatically when the display is powered up 3 Auto USB flash drive auto play mode Media Player is selected in the home screen the contents inside the Contents folder of the USB memory will be played automatically Media Player is selected in the startup mode settings the contents inside the Contents folder of the USB memory will be played automatically when the display is powered up NOTE e Select Media Player in the home screen to automatically play the contents in the auto play mode Select Manual in this setting to display the contents selection screen of the media player e In the auto mode playback will not be carried out if there are no contents in the Contents folder of the SD memory card or USB memory English 26 Item Settings SD Cont
5. Image 1 jpg Image 2 9mp Movie wmv thereafter playback will be repeated Audio Audio 1 mp3 Audio 2 wav thereafter playback will be repeated A Starts playback The playback image is as follows when Video is selected in the audio selection settings Playback time sec 0 10 20 30 40 Display Image 1 jpg Image 2 bmp Movie wmv thereafter playback will be repeated Audio No dudio Movie wmv thereafter playback will be repeated F l a n Starts playback 2 2 Operating flow of media player function 1 Preparation of contents Create the folder in the root directory of either the SD memory card or USB memory e Save the contents in the folder created 2 Settings Configure the various media player settings Media player mode Display time Type of image transition Image transition time Contents aspect Audio selection 3 Select the media e Select the media SD memory card or USB memory connected to the product 4 Selection of folders Select the folder where the contents are stored 5 Selection of video and still images 6 Selection of audio 7 Playback NOTE When auto play mode is selected the contents saved in the Contents folder of the designated media will be played The above mentioned 3 Media 4 Folder 5 Video Still Image Contents Selection 6 Audio Contents Selection will not be carried out 2 3 Preparation of Contents 1 Create the
6. PLUS button ove to the setting on the right of the menu screen D SET button Confirm the setting in the menu screen B EXIT button Return to the previous menu screen IMAGE CAPTURE FUP REMOTE CONTROLLER RU M121 NOTE e The remote control enclosed with the display differs depending on the model Use the OPTION button for menu operations of the product if there is no OPTION MENU button e See the manual of the display for button operations other than the above English 14 Dedicated remote control for the projector NUMBER button PLAY button Used for the input of numbers When playing contents with the media player the functions are as follows 1 Back 2 Playback 3 Skip 5 Stop 6 Pause 2 MENU button Used for the menu operations of the product 3 UP button A ove to the setting at the top of the menu screen DOWN button y AA POWER ON Y STANDBY Move to the setting at the bottom of the menu screen 8 LEFT button 4 O Move to the setting on the left of the menu screen 956 Delete the number in front when inputting numbers RIGHT button 49 E ove to the setting on the right of the menu screen S _ SET button Confirm the setting in the menu screen EXIT button Return to the previous menu screen NOTE eUse the remote control enclosed with the projector to
7. followed by fade in These are the specifications of the product When auto play mode is selected SD contents update is not carried out Create a Contents folder in the root directory of the SD memory card Create a Contents folder in the root directory of the USB memory and save the contents in that folder The folder does not appear in the folder selection screen Even when auto play mode is selected playback of contents does not start automatically after startup Only folders in the root directory of the media are displayed Folders at other levels are not displayed Select Media Player in the startup mode settings Create a Contents folder in the root directory of the USB memory or SD memory card and save the contents in that folder English 35 Specifications Wireless Display Media Player SB O6WC USB port USB2 0 port x2 File system FAT FAT32 SD memory card slot x1 Interface SD memory card slot eCard type SD SDHC File system FAT FAT32 RJ 45 x1 LAN port N To be used when functions are expanded in future Power Supply 16VDC from Option slot interface of Display Projector Power Consumption 4W maximum Complied Regulatory and Guidelines FCC CE Class B Wireless LAN Unit NPO4LM1 NPO4LM2 Operational Temperature 0 40 C Environment Humidity 20 80 without condensation Storage Temperature 10 60 C Envir
8. playback of contents 1 Select Media Player in the home screen Media Player 2 Select one media when the media selection Screen appears NOTE e The icons of unconnected media will be shaded in grey 3 Select one folder Media Player SD NOTE m e Only those folders in the root directory are displayed Folder 02 Folder 03 rn English 21 4 Select the video and still image files to be displayed 1 Use the A W buttons to align the focus on the Media Player SD Contents file you want to select and press the SET button to select the file Press the SET button again to cancel the selection WWepg MPG zie PG aa os NOTE y y y e Upon being selected a check mark will appear on that thumbnail 6666 jpg Lus 7 8888 jpg 9999 jpg e For video files a movie mark will appear on that gt icon a a 8 AAAAmps BBBBwmv CCCCmpg DDDD jpg o The maximum number of files that can be displayed on the file selection screen at any one time is 15 When saving more files than this the excess files will be shown in a different display screen If lt and gt appears on the left and right of the screen it means that there are multiple file selections screens The file selection screen is changed using the buttons Playback of files is carried out in the code order of the filename When files with the same filename but different file formats exist playback will be in the code order
9. result in fire or electric shock Do not disassemble or modify the product This may result in injury fire or electric shock Do not touch the power cable when there is thunder Do not touch the power cable of the display or projector when there is thunder This may result in electric shock Do not replace this product with the power cable still connected to the electrical outlet Do not replace this product with the power cable of the display or projector still connected to the electrical outlet This may result in a failure Do not use this product in a location where it may get wet Cut off the power supply immediately if water were to get inside this product the display or projector and consult your dealer after pulling out the power cable from the electrical outlet If not this may result in a failure fire or electric shock Do not use the wireless LAN unit as a life saving device or equipment The wireless LAN unit attached to this product is not designed to be used as a life saving equipment or device such as a medical device nuclear power equipment device aeronautical device transport equipment device or equipment device that requires a high level of reliability nor is it designed to be used in combination with such devices Do not use the wireless LAN unit near people who are fitted with artificial pacemakers Do not use the wireless LAN unit medical devices This may result in electromagnetic interf
10. turn the power of the projector ON OFF eSee the manual of the projector regarding the button operations of the remote control enclosed with the projector eCheck with your dealer regarding the dedicated remote control for the projector English 15 Operations and settings of the display and projector For displays 1 Connect the power cable to the display first before connecting to the electrical outlet 2 Turn on the main power of the display 3 The video input of the display changes to the product upon pressing the OPTION button on the remote control of the display 4 The audio input changes upon pressing the AUDIO INPUT button on the remote control of the display Set the input to OPTION to select the audio of the product 5 Use the display OSD function to set the AUDIO setting under OPTION SETTING to DIGITAL For projectors 1 Connect the power cable to the projector first before connecting to the electrical outlet 2 Turn on the main power of the projector 3 The video input of the projector changes to the product upon pressing the SLOT button on the remote control of the projector NOTE Depending on the model the projector may not support the audio output of the product Please check with your dealer for details Product Operations Use the remote control enclosed with the display to operate the product when using a display Use the dedicated remote control for the projector to oper
11. 0 Park Boulevard Suite 1100 Itasca Illinois 60143 Tel No 630 467 3000 Type of Product Wireless Display Media Player Equipment Classification Class B Peripheral Model SB 06WC F We hereby declare that the equipment specified above conforms to the technical standards as specified in the FCC Rules FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate this equipment This device and its antenna s must not be co located or operating in conjunction with any other antenna or transmitter IMPORTANT NOTE FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body Country Code selection feature to be disabled for products marketed to the US CANADA Operations in the 5 15 5 25GHz band are restricted to indoor usage only English 1 IC Industry of Canada statement This device complies with Industry Canada licence exempt RSS standard s Operation is subject to the following two conditions 1 this device may not cause interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Caution With DFS band i the device for operation in the band 5150 5250 MHz is on
12. B Setup Manual User s manual CD ROM Setup manual USB extension cable 9 Wireless LAN unit adapter Wireless LAN unit protector SD memory card protector Screws for adapter English 7 Part Names SB 06WC Main unit m3 e e 1 e 2 O e E O o hb RESET E LAN El E SD um LAN Port RJ 45 O Indicator This is used when functions are expanded in isplays the status of the product h d when funct ded Displays the stat fth duct future When using the Intel WiDi function Lights up in green Intel WiDi connection in progress O Reset button communication in progress This resets the product Flashes in green Intel WiDi connection preparation in progress USB Port 1 a S E in sna tel dem cr for connection PP Y connection preparation complete his is used to connect the enclosed wireless par j Media player function setting screen eLights up in green Power ON LAN unit or a commercially available USB memory e y Common eLights up in red System startup in progress eFlashes in red System error Firmware update error Flashes in orange Firmware update in progress Q Slot for the SD memory card Connect the SD memory card O USB Port 2 This is used to connect the enclosed wireless LAN unit or a commercially available USB memory Wireless LAN unit O Indi
13. ION During installation do not leave any foreign objects inside the display or projector Do not drop the product screws and optional slot cover as well 1 Remove the two screws on the optional slot of slot 2 type to remove the optional slot cover For displays remove the handle where necessary 2 Attach this product to a display or projector CAUTION When attaching this product to a display make sure the top side of this product side opposite to the side where the label is pasted faces the rear of the display Damages may result if it is inserted in the opposite direction When attaching this product to a projector make Rear of the display sure the top side of this product faces the top of the projector Damages may result if it is inserted in the opposite direction Top side of this product 3 Securely fasten this product with the screws on the optional slot tightening torque 49 0N cm 68 6N cm Securely fasten the handle with the screws if the handle of the display is removed See the manual of the display for the tightening torque of the handle screws CAUTION e Do not apply a force higher than the specified force when tightening the screws This may result in damages to the screw holes English 10 Installation of protector for wireless LAN unit 1 Remove the screws for securing the protector at the top of the USB Port where the wireless LAN unit is going to be connected NOTE e Th
14. MPEG 1 Audio layer 3 MPEG 2 Audio layer 3 Channel 2ch WMV9 Video Codec Windows Media Video 9 WMV3 wmv WMA9 Audio Codec Windows Media Audio 9 Windows Media Audio 9 Professional Channel 2ch H 264 AVC Video Codec H 264 AVC mp4 AAC Audio Codec Advanced Audio Coding Channel 2ch 2 Image Type Details extension GIF Maximum resolution 1280 x 1280 dot gif JPEG Maximum resolution 4000 x 4000 dot jpg jpe jpeg PNG Maximum resolution 4000 x 4000 dot png BMP Maximum resolution 4000 x 4000 dot bmp 3 Audio Type Details extension MP3 Codec MPEG 1 Audio layer 3 mp3 MPEG 2 Audio layer 3 Channel 2ch LPCM Codec Linear Pulse Code Modulation wav Channel 2ch English 37
15. NEC User s Manual Wireless Display Media Player SB 06WC Index Declaration of conformity eene English 1 Safety Precautions and Maintenance mmm meme me m English 5 INFOMATION EE English 6 ACCESSOLY rr nenne nennen nennen enne nnne nennen English 7 Part Names eene nennen nenne enhn SEEE EAEE nennen nnne nnne nennen nnn English 8 Connections ee eene nennen enne nennen nnn nnne nennen enne eene nennen nnne English 9 Installation nnne EEE English 10 Installation of protector for wireless LAN unit 8 English 1 1 Installation of protector for SD memory card 8 English 12 Installation of adapter for wireless LAN unit MM English 13 Basic Operation eene English 14 Preparations veressseceeseeseseetetetseseeteteesessetenseseenenseseseensesesenenensessaeneneeaees English 14 Display remote control emen English 14 Dedicated remote control for the projector HMM English 15 Operations and settings of the display and projector m8 English 16 Product Operations mene English 16 Selection of Functions eene English 16 Setting the display language mmm HH English 16 Screen Saver ERE English 16 Function Controls nnne e nennen nnn nenne enne nennen nennen nnne English 17 1 Wireless Display mme English 17 2 Media Player emen English 19 3 Settings enne English 24 Troubleshooting mme English 34 Specifications o ON English 36 Declaration of conformity FCC statement Federal Communication Commission Interference S
16. WC vastavust direktiivi 1999 5 EU p hin uetele ja nimetatud direktiivist tulenevatele teistele asjakohastele s tetele English Hereby NEC Display Solutions Ltd declares that this Wireless Display Media Player Model SB O6WC is in compliance with the essential requirements and other relevant provisions of Directive 1999 5 EC Espa ol Por medio de la presente NEC Display Solutions Ltd declara que el Wireless Display Spanish Media Player Model SB 06WC cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999 5 CE EAAnvikh ME THN MAPOY2A NEC Display Solutions Ltd AHAONEI OTI Wireless Display Media Player Greek Model SB O6WC ZYMMOP QNETAI NPOX TIZ OYZIOAEIZ ATIAITHXEIX KAI TIZ AOITIEX ZXETIKEX AIATA EIZ THX OAHTIA2 1999 5 EK Frangais Par la pr sente NEC Display Solutions Ltd d clare que l appareil Wireless Display Media French Player Model SB 06WC est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999 5 CE Italiano Con la presente NEC Display Solutions Ltd dichiara che questo Wireless Display Media Italian Player Model SB 06WC conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999 5 CE Latviski Ar 30 NEC Display Solutions Ltd deklare ka Wireless Display Media Player Model SB 06WC Latvian atbilst Direktivas 1999 5 EK b tiskajam p
17. ate the product when using a projector Selection of Functions The Home Screen is displayed during startup in initial state Select the function using the buttons on the remote control and press the SET button to move to the execution screen of each I 1 function Za V Press the OPTION MENU button on the remote TN MediaPlayer gm control to return to the previous screen The remote control of the display differs depending on the model Use the OPTION button if there is no OPTION MENU button on the remote control Use the MENU button when using a dedicated remote control for the projector Setting the display language The display language in the initial state is English Change the display language where necessary 1 Select Settings in the home screen and press the Settings General SET button on the remote control 2 Select General and press the SET button when Uer EUER the Settings menu appears Date German Deutsch 3 Select Language and press the SET button to Ha French Francais display a list of the display languages and use Splash creen al the A y buttons to select the desired display puis cu language before pressing the SET button Japanese E18 4 Select Done and press the SET button to switch the display language Screen Saver The screen saver screen will appear if there are no operations on the home screen or Intel WiDi standby screen for 30 or more seconds Pr
18. cator Display the status of the wireless LAN unit e Lights up in blue Intel WiDi connection in progress e Flashes in blue Intel WiDi connection in progress data transmission in progress standby for connection English 8 Connections Insert the enclosed wireless LAN unit or a commercially available USB memory or SD memory card into the product e Insert the wireless LAN unit into the product first before turning on the power supply Insert the SD memory card into the slot for the SD memory card so that the label faces the top of the product e Please refer to the paragraph on Specifications for the specifications of the USB memory SD memory card that can be used NOTE The Intel WiDi function cannot be used if the wireless LAN unit is connected after the product is powered up The enclosed wireless LAN unit and USB memory can be used when inserted into either USB Port 1 or USB Port 2 SD memory card Enclosed wireless LAN unit or commercially available USB memory English 9 Installation Attach this product to the display main unit or projector main unit Depending on the display an optional slot board conversion adapter SB 02AM may be required Refer to the Quick Start Guide of the SB 02AM on how to install the SB 02AM Check with your dealer for the compatible displays and projectors that can be used CAUT
19. continue showing the displayed contents 3 PP Skip Play the next contents 1 14 Back Play the previous still image when playing NE still images Start playback from the beginning when playing video and audio contents Play the previous contents if pressed within 1 sec from the start of playback of the contents OPTION MENU Stop the playback and return to the home screen EXIT Stop the playback of contents and return to the menu screen Use the operation buttons to display the order of the video and still image files currently being played and the total number of selected files at the bottom left of the screen Example When 12 25 is displayed it means that The total number of selected video and still image files is 25 The order of the video or still image file currently being played is 12 English 23 3 Settings 3 1 Overview Display product information configure various settings format the media and so on Select Settings in the home screen to display the main screen of the setting menu Password Setting The setting menu can be protected by a password Upon setting a password a password entry screen will appear for you to enter the password when the setting menu is selected Please remember your password as entry to the setting menu will be denied if the password is wrong No password is set at the initial state Settings O s Application General e Set the password under Settings
20. creen English 31 3 5 2 Initialization Initialize the SD memory card or USB memory If a drive ID has been set it will be written into the SD memory card or USB memory Operating Method 1 After selecting Drive select Done at the bottom right of the screen and press the SET button 2 When the message Initialize SD card or Initialize USB memory appears select OK and press the SET button To cancel initialization select Cancel and press the SET button CAUTION Please note that all files will be deleted upon initialization 3 5 3 Firmware Update Updates the firmware of the product The following two update methods are available If these are not displayed on the product s menu use Operating Method 2 Operating Method 1 A USB memory is used for the update 1 When the product is connected to a display set the OPTION POWER setting of the display to ON Set he POWER SAVE function of the display to OFF as well See the user s manual of the display on how to set up the display Download the product firmware from the Company s website URL http www nec display com jp support html 3 Save the downloaded firmware file to the root directory of the USB memory nsert the above mentioned USB memory into the USB port of the product 5 Upon opening the Update F W menu and selecting Firmware the filename of the firmware stored in he USB memory is displayed After selecting the file
21. detect or connect to the product Start up the Intel WiDi software in the PC again Start up the Intel WiDi software after re starting the PC Start up the product again Reset the settings of the product When multiple networks exist in the vicinity detection or connection may not be possible In this case change the channel of the wireless router to a channel that is not in use on another network Update the Intel WiDi software in the PC to the latest version Distortions interruptions and delays are observed in the image When the intensity of appear normally Move the product to a location where there are no obstructions such as walls and doors etc between the PC and the installed display Install the wireless LAN unit at a location with good electromagnetic reception using the adapter for the wireless LAN unit and the USB extension cable Due to the image processing and wireless transmission processing there may be a delay compared to the PC display This is due to the specifications of the Intel WiDi software he radio waves is not sufficient the display may not The PC image does not occupy the full screen of the display Adjust the display size using the Change TV Image Size function in the Intel WiDi software Adjust the display screen on the display end English 34 Media Player Function SD memory card or USB memory is not recognized Re insert the SD
22. display When the product is connected to a display e Set the audio input of the display to OPTION To do so press the AUDIO INPUT button and set the selected audio input AUDIO shown at the top right of the screen to OPTION e Set the AUDIO setting in the display OPTION to DIGITAL To do so press the MENU button select ADVANCED OPTIONS OPTION SETTING and set AUDIO to DIGITAL Check whether the switch for the external speaker and built in speaker of the display has been set correctly e Adjust the volume of the display When the product is connected to a projector Depending on the model of the projector the audio output of the product may not be supported Check with your dealer regarding the specifications of the projector The menu screen does not appear even after startup After startup it takes about a minute for the menu screen of the product to appear After the splash screen appears a blank screen will appear until the home screen is displayed This is due to the specifications of the product When the power lamp is flashing in red Intel WiDi function The Intel WiDi menu cannot be selected in the home screen A failure may have occurred in the product Please consult your dealer or our after service support desk e Start up the product again after checking whether the wireless LAN unit is correctly inserted into the product The Intel WiDi software does not
23. e 01 01 2013 splash screen display Time 00 00 11 Select General from the main screen of the CaS Rec setting menu for the setting screen pot ane Item Settings Language Selects the language of the menu screen The default is English Settings English German eFrench eltalian eSpanish eSwedish eJapanese Date Set the current date Month Day Year Setting Method 1 Press the SET button after selecting this setting 2 Enter the date in the order Month Day Year using the number buttons 3 Press the SET button after selecting Done at the bottom left of the screen Time Set the current time Hours Minutes Seconds The time is displayed in 24 hours format Setting Method 1 Press the SET button after selecting this setting 2 Enter the time in the order Hours Minutes Seconds using the number buttons 3 Press the SET button after selecting Done at the bottom right of the screen Start up mode Set the menu screen to be displayed upon startup If the functions to be used are fixed beforehand those functions can be started directly during start up by setting the startup mode The default is Home Settings eHome elntel WiDi eMedia Player Splash screen Select whether to display the splash screen NEC logo during startup The default is Enable Settings eEnable Display the splash screen eDisable Do not display the splash screen English
24. e wireless LAN unit can be inserted into either USB Port 1 or USB Port 2 CAUTION Do not lose the removed screws Do not leave them inside the device as well Insert the wireless LAN unit to the USB Port Attach the protector for the wireless LAN unit At this point fit the two studs on the protector into the two square holes on the front panel of the product Securely fasten the protector with the screws tightening torque 4 7Necm 7 3Necm CAUTION Do not apply a force higher than the specified force when tightening the screws This may result in damages to the screw holes English 11 Installation of protector for SD memory card 1 Remove the screws for securing the protector at the top of the slot for the SD memory card CAUTION e Do not lose the removed screws Do not leave them inside the device as well 2 Insert the SD memory card into the slot for the SD memory card 3 Attach the protector for the SD memory card At this point fit the two studs on the protector into the square holes on the front panel of the product 4 Securely fasten the protector with the screws tightening torque 4 7Necm 7 3Necm CAUTION Do not apply a force higher than the specified force when tightening the screws This may result in damages to the screw holes English 12 Installation of adapter for wireless LAN unit Depending on the model of the display when an external speaker is fitted the w
25. ears on the left and right of the screen it means that there are multiple file selections screens The file selection screen is changed using the buttons Playback of files is carried out in the code order of the filename When files with the same filename but different file formats exist playback will be in the code order of the file format name 2 Press and hold the y button in the contents selection screen to move the focus to the lower column Press the A button to return to the selection of contents 3 Select the actions displayed in the lower column of the screen and press the SET button to perform the following actions e Select All Select all the audio contents e Clear All Clear all the audio contents Play Start the playback of contents Y AAAAwav BBBBwav CCCCwav DDDDmp3 EEEEmp NOTE The selected contents will be saved in the various media at the stage when Play is executed If the contents selection screen is changed before playback is started the selected contents will be cleared English 22 6 Playback of contents e Select Play in the video still image or audio selection screen to start the playback e Press the remote control buttons to perform the following actions during playback 2 Play Start the playback of contents from the IR pause state l M a 5 W Stop Stop the playback of contents and return to the menu screen 6 11 Pause Stop playback and
26. een for numbers and symbols eenter Confirm the entered information and close the software keyboard e lt X Delete the last character entered English 24 Settings Application Intel WiDi Security code prompt First time pairing only Adapter name SBOo6WC Adapter name access Permitted Lower bandwidth mode Disable FEMA FH FEN A PH FEF FEN I RETF FO FEA ENC esu mm 3 2 About Displays the information of the SD memory card ganos Anaut and USB memory connected to the product Select About from the main screen of the setting Mogel SB oewc Serial Number 3Z0DVT030A menu Firmware version 1 0 rc7 SD Card 3 5GB Free 7 4GB Total USB flash drive 1 14 2GB Free 14 3GB Total USB flash drive 2 None Item Displays Model Product name SB 06WC Serial Number Serial no of this product Firmware version Firmware version of this product SD card Spare and usable capacity of the SD memory card connected to the SD memory card slot of the product USB flash drive 1 Spare and usable capacity of the USB memory connected to the USB Port 1 of the product USB flash drive 2 Spare and usable capacity of the USB memory connected to the USB Port 2 of the product 3 3 Application 3 3 1 Intel WiDi Settings Settings Application Intel WiDi Perform the Intel WiDi settings Select Application Intel WiDi from the main a perm screen of the setting menu for the sett
27. eless Display Media Player Model SB O6WC Slovenian v skladu z bistvenimi zahtevami in ostalimi relevantnimi dolo ili direktive 1999 5 ES Slovensky NEC Display Solutions Ltd t mto vyhlasuje e Wireless Display Media Player Model SB Slovak O6WC spl a z kladn po iadavky a v etky pr slu n ustanovenia Smernice 1999 5 ES Suomi NEC Display Solutions Ltd vakuuttaa t ten ett Wireless Display Media Player Model SB Finnish O6WC tyyppinen laite on direktiivin 1999 5 EY oleellisten vaatimusten ja sit koskevien direktiivin muiden ehtojen mukainen English 4 Safety Precautions and Maintenance For optimum performance please note the following when setting up and using the Wireless Display Media Player Please adhere to the precautions stated in the user s manual of the projector or display to be connected to this product In the event of a fault occurring pull out the power plug of the display or projector immediately If not this may result in fire or electric shock Pull out the power plug from the electrical outlet immediately Consult your dealer for repairs subsequently Do not use when there is a failure e g the screen does not appear etc or when there is smoke or strange odors This may result in fire or electric shock Do not place foreign objects inside the product Do not place foreign objects inside the device when mounting the display or projector to this product This may
28. ent update If a SD memory card is inserted the files saved in the USB memory will be automatically copied to the SD memory card The files will be copied when the USB memory is inserted or when the media player function is selected with the USB memory inserted The contents copied vary depending on the playback mode eln the auto play mode only the files in the Contents folder are copied eln the manual play mode all the folders and files in the folders are copied Settings 1 On Enable the function 2 Off Disable the function NOTE e When there are two USB memories connected the files in the USB memory connected to USB Port 1 are copied Create the Contents folder in the root directory All files will be overwritten n the auto play mode a Contents bak folder will be automatically created in the SD memory card to provide a backup copy of the contents in the original Contents folder The capacity of the SD memory card that can be used is limited because of this backup e The time required for copying is about 3 minutes per 10 megabytes Display time Set the time for displaying still images Use the number keys on the remote control to enter the time Settings Selection range 10 999 sec Setting unit 1 sec Setting Method 1 Press the SET button after selecting this setting 2 Press the minus button to clear the current setting time 3 Use the number buttons to enter the dis
29. erence in the medical device and pose a risk to human life English 5 Information Corresponding regions corresponding countries of Wireless LAN Unit Please refer to our company website for the list of regions and countries where the use of the product is supported Please duly note that use of the product in a region or country which does not support its use may contravene the laws on electromagnetic transmissions in that country URL http www nec display com ap en_projector others wlan html GPL LGPL Software Licenses The product includes software licensed under GNU General Public License GPL GNU Lesser General Public License LGPL and others For more information on each software see readme pdf inside the about GPL amp LGPL folder on the supplied CD ROM About Trademarks e Intel and the Intel logo are trademarks of Intel Corporation in the US and or other countries Windows is a registered trademark of Microsoft Corporation in the US and or other countries e SD and SDHC are the trademarks of SD 3C LLC WEEE Mark European Directive 2012 19 EC Within the European Union EU wide legislation as implemented in each Member State requires that waste electrical and electronic products carrying the mark left must be disposed of separately from normal household waste This includes monitors and electrical accessories such as signal cables or power cords When you need to dispose of your NEC di
30. es Project Add a wireless display and then click SBO6WC 5 When connecting the product to a computer for the first time the security code will be displayed in the standby screen on the display end Enter this security code in the Intel WiDi software and click Continue Intel WiDi WI Enter PIN ate To finalize the connection please enter the PIN code from your Wireless Display co ETEM Enter the following security code on your computer or mobile device 99033804 6 At the end of the connection processing the display screen of the computer will appear in the display 7 Click Disconnect in the Intel WiDi software to stop the connection with the Intel WiDi software How to adjust the size of the computer image displayed in the display projector When black edges appear around the screen without the computer display screen appearing correctly in the screen of the display projector the size of the image can be adjusted using the following method 1 Select Settings Picture and Sound in the Intel WiDi software 2 Click Adjust cropping in the Settings Picture and Sound screen 3 Click the icons in the Setting Adjust Edge Visibility screen to adjust the image size English 18 2 Media Player 2 1 Overview Repeat the playback of video still image and audio files stored in the same folder of the SD memory card or USB memory in the order of the character code of the file
31. ess the EXIT button to return to the previous screen from the screen saver screen English 16 Function Controls 1 Wireless Display Video from a computer that supports Intel Wireless Display hereinafter Intel WiDi can be received and displayed on a display or projected with a projector Computer that supports Intel Projector or display Wireless Display which is connected to this product NOTE Refer to the user s manual of the computer and the Intel website for details on the use and update of the Intel WiDi software Connection Method Explains the operations using Windows 7 Windows 8 1 Select Intel WiDi from the home screen and press the SET button Intel WiDi 2 The right screen is displayed when the upon completing the connection preparation of the product Ud Ready for connection To get started launch Intel WiDi on your computer or mobile device Adapter ID FE12 English 17 3 Start up the Intel WiDi software with the computer 4 Operate the Intel WiDi software to select SBO6WC adapter name of the product when shipped from the factory and then click Connect If the adapter name has been changed select the specified adapter and then click Connect NOTE Depending on the operating environment the product SBO6WC may not be detected In that case click Scan to scan again e For Windows 8 1 open the Charm bar select Devic
32. folder in the root directory of either the SD memory card or USB memory 2 Save video still image or audio files in the created folder Refer to Compatible Formats of the Media Player for the file types NOTE e The media player function will playback the contents in the order of the character code of the filename When specifying the playback order of the contents follow that order to change the filename Example The playback order is as follows when the filenames are Image1 jpg Image2 jpg Image3 jpg 1 Image1 jog 2 Image2 jpg 3 Image3 jpg thereafter playback will be repeated in the order 1 3 English 20 2 4 Settings 1 Configure the respective settings for the auto play mode and manual play mode How to display the setting menu of each play mode In the case of auto play mode 1 Select Settings Applications Media Player from the home screen 2 The setting screen for the auto play mode is displayed In the case of manual play mode 1 Select Media Player from the home screen 2 Select Manual Play Mode Settings at the bottom left of the drive selection screen 3 The setting screen for the manual play mode is displayed 2 Configure the following settings where necessary when the setting screen appears Refer to 3 3 2 Media Player Settings for details of the settings Display time Type of image transition Image transition time Contents aspect Audio selection 2 5 Selection
33. ing screen Adaptar rama aa Permitted Lower bandwidth mode Disable Security code prompt First time pairing only Item Setting Security code prompt Control the storage and use of persistent WFD groups The default is First time pairing only 1 First time pairing only Enter PIN code for first time pairing only 2 Always Enter PIN code for all pairings Adapter name The adapter name of the product can be specified The adapter name is entered using the software keyboard Only alphabet letters and numbers can be used for the adapter name Hyphens cannot be used The default is SBO6WC Adapter name access Enable and disable whether the Device Name setting can be changed by the end user The default is Permitted Setting 1 Permitted Permit changes to be made from the Intel WiDi software 2 Prohibited Prohibit changes to be made from the Intel WiDi software English 25 Lower bandwidth mode Limit the bandwidth used for Intel WiDi The default is Disable Setting 1 Disable Do not set the mode to the low bandwidth mode 2 Enable Set the mode to the low bandwidth mode 3 3 2 Media Player settings Settings Application Media Player Configure the settings for the play mode and auto play mode of the media player Media Player mode Select Application Media Player from the main eens screen of the setting menu for the setting screen
34. ireless LAN unit may interfere with the external speaker making direct connection to the product impossible In this case use an adapter for the wireless LAN unit hereinafter adapter and a USB extension cable to install the wireless LAN unit to the back of the display etc 1 Install the adapter such that the indicator on the wireless LAN unit is on the side of the screw holes on the adapter Screw hole Indicator tightening torque 19 6Necm 29 4Necm CAUTION e Do not apply a force higher than the specified force when tightening the screws This may result in damages to the screw holes 2 Securely fasten the adapter with the enclosed adapter screws l 3 Connect the USB extension cable to the USB Port of the product and the USB port of the wireless LAN unit 4 Peel off the cover of the two sided tape at the bottom of the adapter and press it strongly against the rear of the display to secure the adapter CAUTION e Secure the adapter only after you have carefully considered the installation position e Install the adapter on a horizontal surface e Install the adapter in a location that will not impose stresses on the USB extension cable Do not install the adapter on top of the heat release outlet on the display Remove all moisture dust oil etc from the location first before pasting the adapter at the location Do not allow the Sticky surface to get into contact with your hands or dust This will resul
35. irements of the R amp TTE Directive 1999 5 EC The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R amp TTE Directive 1999 5 EC EN 60950 1 2006 A11 2009 A1 2010 A12 2011 EN62311 2008 EN 300 328 V1 8 1 2012 EN 301 893 V1 71 2012 EN 301 489 1 V1 9 2 2011 EN 301 489 17 V2 2 1 2012 In Italy the end user should apply for a license at the national spectrum authorities in order to obtain authorization to use the device for setting up outdoor radio links and or for supplying public access to telecommunications and or network services Cesky NEC Display Solutions Ltd timto prohlaSuje Ze tento Wireless Display Media Player Czech Model SB O6WC je ve shod se z kladn mi po adavky a dal mi p slu n mi ustanoven mi sm rnice 1999 5 ES Dansk Undertegnede NEC Display Solutions Ltd erkl rer herved at f lgende udstyr Wireless Danish Display Media Player Model SB O6WC overholder de v sentlige krav og vrige relevante krav i direktiv 1999 5 EF Deutsch Hiermit erkl rt NEC Display Solutions Ltd dass sich das Ger t Wireless Display Media Player German Model SB O6WC in bereinstimmung mit den grundlegenden Anforderungen und den brigen einschlagigen Bestimmungen der Richtlinie 1999 5 EG befindet Eesti K esolevaga kinnitab NEC Display Solutions Ltd seadme Wireless Display Media Player Estonian Model SB O6
36. ly for indoor use to reduce the potential for harmful interference to co channel mobile satellite systems ii the maximum antenna gain permitted for devices in the bands 5250 5350 MHz and 5470 5725 MHz shall comply with the e i r p limit and he maximum antenna gain permitted for devices in the band 5725 5825 MHz shall comply with the e i r p limits specified for point to point and non point to point operation as appropriate Users should also be advised that high power radars are allocated as primary users i e priority users of the bands 5250 5350 MHz and 5650 5850 MHz and that these radars could cause interference and or damage to LE LAN devices ii iv Radiation Exposure Statement This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment This equipment should be installed and operated with minimum distance 20cm between the radiator amp your body Antenna list Model Type Connector 2 4 2 4835GHz 5 15 5 25GHz 5 25 5 35GHz 5 47 5 725GHz 5 725 5 85GHz Ant L PCB ant NA 0 34 dBi 2 8 dBi 2 72 dBi 1 29 dBi 0 19 dBi Ant R PCB ant NA 1 15 dBi 0 58 dBi 0 45 dBi 3 24 dBi 1 78 dBi Canadian Department of Communications Compliance Statement for Canada This Class B digital apparatus complies with Canadian ICES 003 English 2 CE statement Europe EU Declaration of Conformity This device complies with the essential requ
37. memory card or USB memory Check whether the file system of the SD memory card or USB memory is compatible with the product or not The SD memory card or USB memory may be damaged Check whether it can be recognized correctly on the computer The files stored in the SD memory card or USB memory do not appear in the contents selection screen The contents may not be supported Check the specifications of the contents e Set the non supported file display setting to Display and check the contents selection screen If the thumbnail of the file appears in grey it means that the Specifications of the contents are not supported Video and still images do not appear normally The files may be damaged Check whether the files can be displayed correctly on the computer Copyright protected contents cannot be displayed Audio of video files is not output Change the audio selection setting to Video Audio of audio files is not output Change the audio selection setting to Audio Setting not included in the media player menu in the home screen When Auto is selected in the media player mode setting the setting will not be included in the media player menu Set the setting to Manual Even when cross fade is selected as the type of image transition cross fade does not occur when switching between videos When cross fade is selected the switchover between videos will be fade out
38. name NOTE e Multiple videos and still images can be selected but only one can be displayed at any one time eContents from multiple folders cannot be selected at the same time e Create the folder in the root directory e The character count limit of the folder name and filename is up to 260 characters including the folder path and extension If 2 byte characters are used the limit becomes even shorter Two playback modes 1 Auto play mode When contents are stored in advance in a designated folder folder name Contents of the SD memory card or USB memory playback of the stored contents will start at the same time the display is started or when the media player function is selected 1 Create the Contents folder in the root directory 2 Set the start mode to Media Player when starting playback automatically after starting the display Refer to 3 4 General for the details of the start mode 2 Manual play mode e Start manual playback after selecting the media folder and contents Playback Settings The playback time for still images can be set The time can be set between 10 and 999 sec e When the selected contents consist of only a single static image the contents will continue to be displayed regardless of the set time e The type of screen transition fade in fade out cross fade can be selected Different types of screen transition cannot be used at the same time The time can be set bet
39. of the file format name 2 Press and hold the V button in the contents selection screen to move the focus to the lower column Press the A button to return to the selection of contents 3 Select the actions displayed in the lower column of the screen and press the SET button to perform the following actions Select All Select all the video and still image contents e Clear All Clear all the video and still image contents Next Move to the audio file selection screen If there are no audio files saved Next will appear in grey e Play Start the playback of contents NOTE The selected contents will be saved in the various media at the stage when Play is executed If the contents selection screen is changed before Play is executed the selected contents will be cleared 5 Select the audio files Media Player SD Contents 1 Use the A W buttons to align the focus on the file you want to select and press the SET button to select the file Press the SET button again to cancel MPs wa 2 the selection ku ee Losses wore al alas Upon being selected a check mark will appear on gt A that thumbnail The file format MP3 or WAV will be displayed on IN Bip the thumbnail of the file The maximum number of files that can be displayed on the file selection screen at any one time is 15 When saving more files than this the excess files will be shown in a different display screen If lt and gt app
40. onment Humidity 10 90 without condensation isis 180 0 W x 30 0 H x 119 0 D mm 7 09 W x 1 18 H x 4 69 D inches excluding protrusions Weight 0 3kg 0 7lbs Wireless LAN standard 2 4 GHz band conforming to the IEEE802 11b g n standard 5 GHz band conforming to the IEEE802 11a n standard W52 W52 W56 Host Interface USB 2 0 Power Consumption 2W maximum Complied Regulatory and Guidelines NPO4LM1 FCC Class B IC NPO4LM2 CE Class B Operational Temperature 0 40 C Environment Humidity 20 80 without condensation Storage Temperature 10 60 C Environment Humidity 10 90 without condensation Dimensions 26 2 W x 12 9 H x 69 7 D mm 1 03 W x 0 51 H x 2 74 D inches excluding protrusions Weight 159 0 03lbs CAUTION Please refer to our company website for he list of regions and countries where the use of the Wireless LAN Unit NPO4LM1 NP04LM2 is supported Please duly note that use of the product in a region or country which does not support its use may contravene the laws on electromagnetic URL http www nec display com ap en ransmissions in that country projector others wlan html English 36 Compatible formats of the media player 1 Video Type Video Audio Details extension MPEG2 Video Codec MPEG2 mpg MEMS Audio Codec MPEG 1 Audio layer 2 mpeg MPEG 2 Audio layer 2
41. play time and then press the SET button English 27 Item Settings Transition type Specify the transition type Settings Transition Image 1 Fade in Image 1 mage 3 Transition time 2 Fade out Image 1 mage 3 Transition time 3 Cross fade Image 1 i mage 3 Transition time 4 None Image 1 Image 2 Image 3 Transition time NOTE Only one type of image transition can be specified When cross fade is selected the switchover between videos will be fade out followed by fade in Video 1 Still image Fade out Fade in Cross fade Transition time e This setting does not support audio Transition time Set the time for the fade in fade out and cross fade Use the number keys on the remote control to enter the time Settings Setting Method Setting range 1 5 sec Setting unit 1 sec 1 Press the SET button after selecting this setting 2 Press the minus button to clear the current setting time 3 Use the number buttons to enter the image transition time and then press the SET button English 28 Item Settings Content aspect Set the display method for videos and still images Settings 1 Full Change the aspect ratio of the image to occupy the entire screen of the display 2 Normal Maintain the aspect ratio of the image NOTE Please note that there is a risk of infringing upon the rights of copyright
42. rasib m un citiem ar to saistitajiem noteikumiem Lietuviu iuo NEC Display Solutions Ltd deklaruoja kad is Wireless Display Media Player Model SB Lithuanian 06WC atitinka esminius reikalavimus ir kitas 1999 5 EB Direktyvos nuostatas English 3 Nederlands Hierbij verklaart NEC Display Solutions Ltd dat het toestel Wireless Display Media Player Dutch Model SB 06WC in overeenstemming is met de essenti le eisen en de andere relevante bepalingen van richtlijn 1999 5 EG Matti Hawnhekk NEC Display Solutions Ltd jiddikjara li dan Wireless Display Media Player Maltese Model SB 06WC jikkonforma mal htigijiet essenzjali u ma provvedimenti ohrajn relevanti li hemm fid Dirrettiva 1999 5 EC Magyar Alul rott NEC Display Solutions Ltd nyilatkozom hogy a Wireless Display Media Player Hungarian Model SB 06WC megfelel a vonatkoz alapvet k vetelm nyeknek s az 1999 5 EC ir nyelv egy b el r sainak Polski Niniejszym NEC Display Solutions Ltd o wiadcza ze Wireless Display Media Player Polish Model SB O6WC jest zgodny z zasadniczymi wymogami oraz pozosta ymi stosownymi postanowieniami Dyrektywy 1999 5 EC Portugu s NEC Display Solutions Ltd declara que este Wireless Display Media Player Model SB O6WC Portuguese est conforme com os requisitos essenciais e outras disposi es da Directiva 1999 5 CE Slovensko NEC Display Solutions Ltd izjavlja da je ta Wir
43. s holders that are protected under the Copyrights Act when screen compression or expansion is carried out through changes in the aspect ratio in commercial establishments or public viewing locations like cafes and hotels etc When set to Normal some parts on the left and right or up and down of the screen may appear blank depending on the aspect ratio of the contents Display Example Original image Full Normal Audio selection Play either the audio of an audio file or the audio of a video file Set which audio to playback Settings 1 Video Play the audio of the video Audio files will not be played even if they are selected 2 Audio Play the audio of the audio file The audio in the video will not be played even if the video contains audio Non supported file display If the selected folder contains files with formats that are not supported by the product you can set whether to display the names of those files in the contents selection screen You can check whether the files saved in the media are supported by the product Settings 1 Yes Display non compatible file names 2 No Do not display non compatible filenames NOTE When the filename is set to Yes the thumbnail of that file appears in grey but it cannot be selected English 29 3 4 General Settings General Configure the settings for the menu display language date and time startup mode and O GER Dat
44. select Done at the bottom right of the screen and press the SET button to start he firmware update 7 When the firmware update is completed normally the product will start up again Operating Method 2 Use a USB memory or the enclosed SD memory card for the update 1 When the product is connected to a display set the OPTION POWER setting of the display to ON Set the POWER SAVE function of the display to OFF as well See the user s manual of the display on how to set up the display 2 Download the product firmware from the Company s website URL http www nec display com jp support html 3 Save the downloaded firmware file to the root directory of the SD memory card or the USB memory 4 Insert the above mentioned SD memory card or USB memory into the slot for the SD memory card or the USB port on the product 5 Turn off the power of the display or projector connected to the product 6 Turn on the power of the display or projector while pressing the reset button of the product Press and hold the reset button for about 15 sec after the display or projector starts up 7 The product indicator flashes orange during the update process The indicator flashes red if the update fails In this case perform the update again 8 The product restarts when the firmware update is completed normally 2 S 6 CAUTION e The firmware update time is about 10 minutes Never switch off the power of the displa
45. splay products please follow the guidance of your local authority or ask the shop where you purchased the product or if applicable follow any agreements made between yourself and NEC EE The mark on electrical and electronic products only applies to the current European Union Member States Outside the European Union If you wish to dispose of used electrical and electronic products outside the European Union please contact your local authority so as to comply with the correct disposal method NOTE Unauthorized reproduction of the information in this manual in part or in whole is strictly prohibited The information in this manual may differ from the information shown in the actual display screen The information in this manual is subject to future changes without notice While every endeavor has been made to ensure the information in this manual is accurate and complete please contact us if you find any errors or omissions English 6 Accessory The following accessories are enclosed with the product at the time of purchase Please contact your dealer if you find any of the accessories missing or damaged SB 06WC Main unit SD memory card capacity 8GB Wireless LAN unit SD memory card protector Setup manual Wireless LAN unit protector User s manual CD ROM Wireless LAN unit adapter USB extension cable Screws for adapter SB 06WC Main unit Wireless LAN unit SD memory card capacity 8G
46. t in a drop in the adhesive strength The two sided tape cannot be peeled off and used again Do not use it again once it is peeled off Be careful when removing an adapter that has been attached using two sided tape Using excessive force may result in damages to the adapter English 13 Basic Operation Preparations For displays eRemote control enclosed with the display For projectors eRemote control enclosed with the projector eDedicated remote control for operating the product Display remote control VIDEO POWER ON button E Turn on the power of the display STANDBY button Turn off the power of the display SWITCH INPUT button OPTION Switch the video input of the display to the product SWITCH AUDIO INPUT button AUDIO INPUT Switch the audio input of the display Select OPTION when outputting the audio of the product OPTION MENU button Used for the menu operations of the product Q NUMBER button PLAY button Used for the input of numbers When playing contents with the media player the functions are as follows 1 Back 2 Playback 3 Skip 5 Stop 6 Pause MENU button Turn the display OSD screen ON OFF UP button A Move to the setting at the top of the menu screen Q DOWN button v ove to the setting at the bottom of the menu screen D MINUS button Move to the setting on the left of the menu screen Delete the number in front when inputting numbers p
47. tatement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e Reorient or relocate the receiving antenna e Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Declaration of Conformity This device complies with Part 15 of FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation U S Responsible Party NEC Display Solutions of America Inc Address 50
48. ween 1 and 5 sec Playback time and transition time image for fade in cases Still image display Transition times Display time i 1 to 5 sec 10 to 999 sec Playback Operation Playback operations playback stop pause skip back can be carried out using the remote control SD contents update function e Contents can be copied from a USB memory to a SD memory card on the product When a SD memory card with a protector is connected to the product the contents in the SD memory card can be updated without removing the protector e In the auto play mode the contents files in a designated folder of the USB memory folder name Contents will be copied to the Contents folder of the SD memory card e n the manual play mode all the files in the USB memory will be copied to the SD memory card Audio Selection The product outputs the audio of either an audio file or video file Select which audio to playback Example on playback of contents Selected contents File type File name Video Still Images 1 Image 1 jpg still image playback time setting 10 sec 2 Image 2 bmp still image playback time setting 10 sec 3 Movie wmv playback time 15 sec Audio 1 Audio 1 mp3 playback time 15 sec 2 Audio 2 wav playback time 25 sec English 19 The playback image is as follows when Audio is selected in the audio selection settings Playback time sec O 10 20 30 40 Display
49. y or projector connected to the product during the update Never pull out the SD memory card or the USB memory where the firmware is stored as well The update may fail and the product may no longer work normally NOTE e Please consult your dealer or our after service support desk if the product fails to start up even after running the update process English 32 3 5 4 Reset Return the product settings to the default state when first shipped from the factory Or start up the product again Item Contents Reset all settings Return all general and system settings and the product s Intel WiDi and media player to the default state when first shipped from the factory Reset Intel amp WiDi settings Return the Intel WiDi settings to the default state when first shipped from the factory Reset Media Player settings Return the media player settings to the default state when first shipped from the factory Restart only Start up the product again The product settings will not return to the default state when first shipped from the factory Operating Method 1 After selecting the contents you want to run select Done at the bottom right of the screen and press the SET button 2 Select OK and press the SET button when the message Reset the setting appears To cancel select Cancel and press the SET button English 33 Troubleshooting General Audio cannot be heard from the

Wireless Display Media Player SB-06WC

Contents

Download Pdf Manuals

Related Search

Related Contents