User Manual of IR Waterproof Watch Camera
Contents
1. Long press button lighting 10 second Flash 3 times gt Video recording started 2 save the file entering standby mode restart the recording During the recording Blue light The file will be saved Shortly press button 6 twice Keeps lighting amp entering the standby mode Shortly press button once The recording restarted Attention 1 In order to confirm the file s safety the system will save the files automatically very 20 minutes during the recording 2 In order to save the power the instruction light turns off during the recording To confirm the recording mode just shortly press function button to light up the instruction light 4 IRlight Under the video recording mode press the function button for few seconds the red light will flash 3 times as it enters the IR light recording mode Quick know steps 1 switch on IR light recording mode During the recording Red light Long press button 6 Eq Flash 3 times ee AB le htrecording mode Attention The IR light recording mode only can be turned on under the video recording condition and be turned off under power off Charging Under the power off mode connect the device to computer with a USB cable The blue light and red light will both keep lighting while charging When the blue light turns off and red light keeps lighting this signifies the camera is fully charged 4 Reset Press the power on off button and fu2. MM SS 4 Attention 1 When taking video continually the system will automatically generate a new video file after each operation 2 If the device cannot be turned on please check whether the power is low While the device in the low power the red light flashes 10 times Then the file will be saved automatically and the device turns off 3 In order to ensure the sound effect better please use the MIC cover while recording 4 5 6 Besides the device is attached IR light camera lens and 4 IR lights User can choose to turn on the IR light mode according to the condition to make the night vision better Connect to computer There is a slight difference in time for different computers to identify the hardware Please wait patiently during the period If the computer can t identify the hardware please make sure your operating system drivers and USB interface cable work and connect properly Then connect the device to computer again The devices memory function uses a built in high capacity polymer lithium battery Please charge the battery fully after user have used out the battery first five times By doing so user can enlighten the maximum capacity of the battery reaching the standard working hours When the memory capacity isn t enough the blue light and red light both flashing for 5 seconds at the same time The device will save the file automatically then switch off If user needs to continue the rec
3. User Manual of IR Waterproof Watch Camera e Product Accessories e Watch camera e USB cable e User manual CD e aMlC cover e Picture amp Button IR Right D USB Port Function Button Instruction Light 1 Camera 2 MIC 3 Time Adjustment 4 Power On Off Button 5 Instruction Light 6 Function Button 7 USB Port 8 IR light Technical Data 1 Main functions video recording IR night vision waterproof function watch USB drive 2 Video format AVI 1920 1080 resolutions 3 Internal memory 2GB 4GB 8GB Max 32GB 4 USB port 2 0 Hs 5 Charging about 3 4 hours 6 Battery use time built in Li battery can work about 2 hours 7 Operation systems don t need to install the driver if the operation system is Windows ME 2000 XP vista or above except Windows98 4 Operation 4 Switch on Video Recording Press the power on off button for few seconds the blue light and red light will be both on for 10 seconds then the blue light will flash three times as it enters video recording mode During the recording press the function button once the blue light will continue flashing press it again during the blue light flashing period The blue light will remain lighting The video file will be saved and the device entering the standby mode Shortly press the function button again to restart recording Quick know steps 1 switch on starting the video recording Blue amp Red light Blue light
4. nction button at the same time to reset when the camera cannot work normally Attention if user reset directly during video recording the file will not be saved 4 Playback video Turn off the camera after the files being saved connect the device to computer with a USB cable then click the removable disk and play the video on the computer Please make sure the player software has been installation in the computer before connecting Remark To make sure the video plays smoothly we suggest you to copy the files to your computer then play back it 4 Switch off Press the power on off button for few seconds the red will flash 3 times then the power will turn off The device can be switched off under any mode Attention the file will be saved automatically before the power turns off 4 Setting time The recording date and time can be displayed on the video and photo When using the device for the first time you can set the time of video as follows 1 Plug the camera into the computer via USB cable 2 Insert the CD and open the file named Time txt 3 Change to desired date and time format as 2012 07 13 14 56 12 Y 4 Save file to the device directory 5 Close the window and turn off the product The camera should then have the correct date and time next time a file is recorded Note In order for the time and date to work correctly the date must be entered as YYYY MM DD and the time must be entered as HH
5. ord please spare some capacity first
Download Pdf Manuals
Related Search