Home

model - GPO Retro

1. MODEL MEMPHIS CD USB SD PLAYER WITH TURNTABLE ENCODING TO USB AND SD CARD FM STEREO RADIO OPERATING INSTRUCTIONS PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE SAFETY INSTRUCTIONS WARNING TO PREVENT FIRE OR SHOCK HAZARD DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash and CAUTION TO REDUCE THE RISK OF The exclamation point aow head within the ELECTRIC SHOCK DO NOT REMOVE within the triangle is a sign alerting you of COVER OR BACK NO USER warming sign alerting you dangerous voltage SERVICEABLE PARTS INSIDE REFER retard as P UE inside the product SERVICING TO QUALIFIED SERVICE product PERSONNEL IMPORTANT SAFETY INSTRUCTIONS e Read instructions All the safety and operating instructions should be read before the appliance is operated e Retain instructions The safety and operating instructions should be retained for future reference e Heed Warnings All warnings on the appliance and in the operating instructions should be adhered to e Follow instructions All operation and user instructions should be Followed e Water and Moisture The appliance should not be used near water for example near a bathtub wash bowl kitchen sink laundry tub in a wet basement or near a swimming pool etc e Heat The appliance should be situated away from heat sources
2. Play Pause Button 5 Speed Selector 20 AUDIO IN Jack 6 Tone arm Holder 21 Record Button 7 Display 22 Function Selector 8 Speakers 23 Volume Control 9 Open Close Button 24 CD Door 10 Tuning Control 25 Power Indicator 11 FM FM STEREO BUTTON 26 IR Sensor 12 Mode Button Program Repeat 1 Repeat Album Repeat All Random 27 Auto Stop ON OFF Selector 13 BBS Button 28 Aux Line Out output Socket 14 Skip Button 29 FM Antenna 15 Skip Button 30 AC Power Cord 16 SD MMC Card Slot Remark Saving energy when the unit has no sound output on turntable player mode CD mode and USB SD mode in about 15 minutes it will be switched to stand by automatically It can be switched ON the unit by switching the function selector again FM RADIO Set the Function Selector 22 to the Radio position Select the desired frequency band with FM FM STEREO Selector 11 Tune to the desired radio station by turning the Tuning control 10 Adjust the volume 23 control to desired level To turn off the radio set the Function Selector 22 to the Power OFF position a UD I9 TURNTABLE OPERATION Preparation e Open the record player cover release the tone arm clamp and remove the stylus protector Listening to Records Set the Function Selector 22 to the PHONO position Place a record on the turntable over the central spindle Place the EP adapter over the central spindle when playing 17cm EP records
3. Set the Speed Selector 5 to 33 or 45 or 78 rpm according to the record Release the tone arm clamp and remove the protective cap from the stylus Lift the Tone arm with the Tone arm Lift Lever Move the tone arm to the beginning of the record or to the start of a particular track Gently lower the tone arm onto the record with the Tone arm Lift lever to start playing When the record is finished the tone arm will automatically stop Lift the tone arm from the record and return it to the rest 9 To stop manually lift the tone arm from the record and return it to the rest position N SOUS Qr c ED Auto stop ON OFF selector e Auto stop will function when playing records singles at EP 33 RPM To set the auto stop selector switch Auto Stop switch 27 to ON for turntable auto stop function e Note When playing EP 45 or 78 RPM Switch Auto stop 27 to the Off position This enables the whole album to play Replace the protective cap on the stylus when not in use COMPACT DISC MP3 OPERATION LOADING AND UNLOADING COMPACT DISCS 1 Select CD MP3 with the Function selector 22 on the unit to choose the CD MP3 mode Open the disc compartment by pressing the CD Open Button 9 When the disc compartment has opened remove a disc from its case and place it carefully in the compartment with the label side facing up Locate smaller discs in the centre depression of the compartment Close the disc compartment When the com
4. such as radiators heat registers stoves or other appliances including amplifiers that produce heat e Power Sources The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance e Cleaning The appliance should be cleaned only as recommended by the manufacturer e Object and Liquid Entry Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings e Damage Requiring Service The appliance should be serviced by qualified service personnel when o gt The power supply cord or the plug has been damaged o Objects have fallen or liquid has been spilled into the appliance o The appliance has been exposed to rain o The appliance does not appear to operate normally or exhibits a marked change in performance o gt The appliance has been dropped or the enclosure damaged e Servicing The user should not attempt to service the appliance beyond that described in the operating instructions All other servicing should be referred to qualified service personnel LOCATION OF CONTROLS Before use detach the stylus guard white plastic cover by pulling it straight off the front of the cartridge in the direction of the arrow oooooo oooooo oo oe oo oo eo oo 1 Turntable 2 45 RPM Adaptor 17 Stop CD USB SD Button 3 Cue lever use this lever to lift the tone arm 18 USB Port 4 Tone Arm 19
5. the files from an mp3 disc and store then into your memory device through the USB port or SD MMC card slot 1 Insert the mp3 disc 2 Press the SKIP button 14 15 to select the track then press the PLAY PAUSE button 19 that you want to copy Press the encoding button to start copying the files and the display will show REC USB CARD flash Press the SKIP button 14 15 to select into USB or Card drive Press the Record button 21 or STOP CD USB SD button 17 to stop encoding COPY FROM USB TO SD OR FROM SD TO USB 1 You can copy the files from MP3 or USB drive and store them into your memory device through the USB port or SD MMC card slot Insert the MP3 player or USB drive into USB slot and SD CARD into SD card slot Switch the function button to USB o Press button STOP USB SD for more than 3 second to change USB CARD mode and press the RECORD button the LCD will display COPY USB gt SD o The display will be counted from 1 to 100 during recording o gt Do not interrupt during copy recording process until completed otherwise recording function cannot be performed Insert the SD card and the MP3 player or USB drive into USB slot Switch the function button to CD MP3 USB SD then press button STOP USB SD for more than 3 second to change USB CARD mode and press the RECORD button the LCD display COPY SD gt USB The display will be counted from 1 to 100
6. Do not interrupt during copy recording process until completed Otherwise recording function cannot be performed REMOTE CONTROL UNIT Insert CR2025 battery before use 1 PLAY PAUSE BUTTON x 2 RECORD BUTTON 3 STOP CD USB SD BUTTON yA AS 4 SKIP BUTTON i Cum 5 SKIP BUTTON EE 6 OPEN BUTTON te S47 7 PROG BUTTON Q OF a 8 MODE BUTTON ver wane END PHBE 9 FOLDER UP att 4 9 10 FOLDER DOWN TOY XOT 11 Remote Sensor STYLUS REPLACEMENT N Loosen the red part of the stylus by screwdriver and take out as per diagram A and B Replace the new stylus as per C and D diagram 4 C THE ABOVE DIAGRAM IS ONLY SHOWING HOW TO REPLACE A NEW NEEDLE STYLUS EXTRA 1 PIECE STYLUS NEEDLE IS INCLUDED Occo WARRANTY amp SUPPORT Your ProTelX product has been carefully manufactured and 100 tested using high quality assured components It is guaranteed against faulty workmanship and materials for a period of 12 months from the date of purchase In the unlikely event that failure should occur the unit will be repaired or replaced free of charge when returned postage paid to the address below within the guarantee period The guarantee does not include damage or failure resulting from misuse or damage in transit Your statutory rights under common law are in no way affected by this guarantee For service in or out of the guarantee period please return the unit postage paid to the ProTelX
7. address below When returning your unit please ensure that the package contains a covering letter stating where and when the unit was purchased and the nature of the faults plus your proof of purchase Repair or replacement is at the discretion of the manufacturer ProTelX reserves the right to change product specification without prior notice ProTelX Suite B Floor 8 St James House Pendleton Way Salford Manchester M6 5FW You may wish to call our customer service department on 0845 521 4095 10
8. eginning of the first programmed track To Clear The Program Memory If the disc is playing press the Stop button to stop the disc PLAY AUDIO VIA MP3 PLAYER OR SMARTPHONE not supplied 1 Using supplied 3 5mm jack lead connect one end to the headphone socket on mp3 player and the other side to the Audio In jack 20 on the Memphis Vinyl Player 2 Change function selector 22 to Audio line in 3 Operate your mp3 player as directed by your manufacturer USB CARD OPERATION 1 Insert the USB or SD card 2 Switch FUNCTION button to the position of CD USB SD as below diagram 3 Press this button on the unit for 2 seconds to select the CARD USB mode as below diagram CMP3 PHONO CD USBISD FUNCTION BAND Press this button on the unitfor 2 seconds to select the USB CARD CD mode 4 Theunit will automatically read the total folders and the number of the total tracks NOTE Only Mp3 file format is supported Not all brands of USB flash disc are supported PLAYING x o0 om Playback starts with the first track the display shows the current track number To interrupt playback press PLAY PAUSE button The time elapsed indicator will flash To resume playback press the PLAY PAUSE again To stop playback press the STOP button ENCODING AND STORING FROM A NORMAL CD You can encode you favourite CD songs
9. into mp3 format and store them into your memory device through the USB port or SD MMC card slot 1 2 3 Set the Function Selector 22 on the unit to choose the CD mode Press the SKIP button 14 15 to select the track then press the PLAY PAUSE button 19 to be encoded Press the RECORD button 21 to start sync encoding and the display will show USB or CARD flashing Press the SKIP button 14 15 to select recording into USB or Card drive press the RECORD button to confirm Press the Record button 21 or STOP CD USB SD button 16 to stop encoding Remarks Recording CD must be synchronized and press the STOP CD USB SD button to confirm NOTE Some CD s are copyrighted which means that you may not be able to encode from them Always make sure you are allowed to copy from the format you are working with and that you are not infringing any copyright laws ENCODING AND STORING FROM PHONO You can encode you favourite EP songs into mp3 format and store them into your memory device through the USB port or SD MMC card slot 4 9 1 Set the Function Selector 22 to the PHONO position 2 3 Press the Record button to start sync encoding and the display will show USB or Select the track no to be encoded CARD flashing Press the SKIP button 14 15 to select recording into USB or Card drive Press the Record button 21 or STOP CD USB SD button 16 to stop encoding COPYING FROM MP3 DISC You can copy
10. partment is fully closed the disc will start turning automatically The total number of tracks of the CD will appear on the LCD display 9e he C a oma LISTENING TO COMPACT DISC AND MP3 DISC CD 1 Select CD with the Function selector 22 on the unit to choose the CD mode 2 Press the PLAY PAUSE button on the unit once to start playing the CD From the first track and play indicator will appear on the display 3 Press the PLAY PAUSE button again to playing the CD pause indicator will appear on the display the track number is flash 4 To stop playback press the Stop CD USB SD button TRACK SKIP CD 1 Press the SKIP SEARCH REW or F F button on the unit 14 15 TRACK SKIP MP3 1 FOLDER UP DOWN by REMOTE 9 10 the Album no will change 2 Press SKIP SKIP REW or F F buttons 14 15 the Track no will change PROGRAMMED DISC PLAY CD It is not possible to enter programs during disc play Press the Stop button 17 first then follow the instructions below 1 Press the PROGRAM button MODE Button 12 on the unit The following information will be displayed on the CD Display 2 Press the Forward and Reverse Skip Track buttons 14 15 on the unit to select the track to be stored in location i e track 03 3 Press the PROGRAM mode button The first program selection is now stored in the program memory Listening to Programmed Tracks Press the Play Pause button Disc play will start at the b

model - GPO Retro

Contents

Download Pdf Manuals

Related Search

Related Contents