KVM-0811 / KVM-1611 8/16-Port PS2 KVM Switch
Contents
1. NN lt z Scroll 4 le n Beeper Lock EN Note The default Beeper function is ON and beeper control is only for available for Scan Mode NLL A Scroll 5 Auto Scan Lock AN OSD setting back to factory default value gt II Note Not including password 12 Search the same PC name Note Search PC name starting from 1st PC port Space bar On Screen Display Menu Example A To access 8 computer attached to Port 4 of the three Bank You can press through hot key as below Scroll lock Scroll lock 3 04 B access a computer attached from Bank 3 to Bank 4 You can press through hot key as below Scroll lock Scroll lock Page Down Note Bank no and Port no selection must be made using the numeric keys on the keyboard Numeric keys on the keypad are not available as a hot key command 4 Daisy Chain Connection Please use the 3 feet 3 in one daisy chain Cable Kit Optional ACC 2009 to daisy chain the KVM Switch 1 Connect Keyboard Mouse and Monitor to the console port white color block of bank 1 KVM switch 2 Use one end of 3 in one Cable Kit to connect the daisy chain port of bank 1 and the other end for the console port white color block of bank 2 KVM switch 3 Please repeat item B to daisy chain more bank as you want But the maximum daisy chain bank is eight levels 4 Before chaining the slave bank up to six banks2. A The OSD 10 SEC means that the OSD windows display or PC system name exists 10 sec on your monitor You can modify it from 05 sec to 99 sec The factory default value is 10 sec The SCAN TIME means that scan interval from one PC port to next PC port The default SCAN time is 10 sec and the maximum scan time is 99 sec 5 99 sec The CHANGE PASSWORD is for user to avoid all PC systems to be intruded by the other person The default password is 8 digits 00000000 U There is an enter password window showed out when you select this item and then press the Enter The maximum password is eight digits After you key in the password already and press the Enter key there is another window for confirming your typed password You need to retype the password again for rechecking your previous key in password is matched or not 17 D The CONSOLE ON OFF means to manage the console of KVM switch If you select CONSOLE it means that any user can use the console If you select CONSOLE OFF factory default OFF state it means that any user will not be allowed to use the console unless you enter the password When you enter the password already and pass the KVM switch authentication the CONSOLE will be set to ON After you finish using KVM switch please don t forget to set up CONSOLE ON state to OFF state Besides if current CONSOLE is ON state and you reset KVM switch
3. the CONSOLE will be set up ON state back to OFF state E When you finish the set up of PC name and get out of OSD setting mode you will find the PC name showed at the up left corner of monitor Now you can use ESC key to clear the message right away if you don t need it F If you want OSD returning back to factory default value you can execute SCROLL LOCK SCROLL LOCK R keys in order The bank seven segment LED on the front panel will be flashed during the refresh process When the OSD value back to default setting the bank seven segment LED on the front panel will stop flashing 7 Troubleshooting Ensure that all cables are well seated Label all of cables with the number for each respective computer to avoid confusion The recommended VGA cable distance is 5 meters maximum without ghosting and degradation Normally the cable length is based on driver capacity of your VGA card If you need longer VGA cable please use VGA extender to accomplish your applications The recommended PS 2 cable distance is 5 meters maximum Normally the cable length is based on driver capacity of your motherboard PS 2 port If you need longer PS 2 cable please use PS 2 extender to accomplish your applications The Power Jack polarity is center positive and the power adapter need be DC12V 1A or DCO9V 1A Don t press any keys on the keyboard while the selected computer is booting up Otherwise it might cause the keyboard erro
4. D level LevelOne KVM 0811 KVM 1611 8 16 Port PS2 KVM Switch User Manual Ver 1 0 1 0706 Safety FCC This equipment has been tested and found to comply with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference 2 This device must accept any interference received It s including interference that may Cause undesired operation CE This equipment is in compliance with the requirements of the following regulations EN 55 022 CLASS B Table of Contents 1 a INTRODUC HON enan a a 1 ene Me Meat ene ent iene Ment ene 1 2 SYSTEM REQUIREMENTS scccrceasecenceancacnceaneacncaanacancaanacancesnncaneaandeatanondaatmenndnanesandeanesaneauneneneact 2 TECHNICAL SPECIFICATIONS 3 ANE tsetse aetna ctenc anatase eins eaten ana E Nast tata tects 4 FA eA NIB a taosnnetaue ue a a 4 GABLE DIAGRAMS esas aE 5 HARDWARE INSTALLATION 0ccccccececsececcccsceaceceacenesceaesceaceceaeenesaeaeeeeaneeesnenesaeass 6 STEP 1 RACK MOUNTING cccccececcecccce
5. you need a VGA extender between the fifth bank and the sixth bank to enhance the VGA signal Note If you would like to daisy chain 8 port and 16 port PS2 or USB KVM Switch together the master bank must be 16 port PS 2 or USB KVM Switch Bank 1 l nn nn d all Bank 8 9 Hot Plug The KVM Switch supports Hot Plug function for easy addition or removal of PCs The user can arrange or maintain PCs as follows 1 APC can be disconnected and reconnected to the same or different port of the KVM unit without having to power it off as long as it is not the Daisy chain port or pass through port 2 The pass through port PC i e The pass through port means the console port is connected to PC directly is powered on Before you go hot plug function please switch to this pass through port to next port or say emulation port and then switch back to the pass through port 3 You may unplug the mouse or the keyboard from the console port and plug it back in at any time Note some O S Operation Systems like SCO Unix are unable to support Hot Plug function If you apply Hot Plug to this kind of O S it will cause unpredictable behavior or shut down the PC Before attempting to use Hot Plug please make sure your O S and mouse software driver supports the Hot Plug function 6 On Screen Display 1 OSD menu can be popp
6. On Screen Display scan Intervals Keyboard Emulation Mouse Emulation VGA Resolution Bandwidth Daisy Chain MAX Level MAX PC Connection Housing Power Adapter Operation Temp Storage Temp Humidity Size Weight kg Dimension cm KVM 0811 8 1 KVM 1611 16 1 VGA HDDB 15pin shared with PS2 keyboard and Mouse PS 2 Keyboard Mini Din 6 pin PS 2 Mouse Mini Din 6 pin VGA HDDB 15pin PS 2 Keyboard mini Din 6 pin PS 2 Mouse Mini Din 6 pin VGA HDDB 15pin On Screen Display Manual Hot Key Push Button 8 16 1 Yes 9 99 Sec PS2 PS2 1920X1440 200MHz 8 levels 120 128 Metal DC 12V 1A or DC 9V 1A 0 50 C 20 60 C 0 80 Non Condensing 19 Rack Mount 1RU 2 2kg 41 L X 16 5 W X 4 4 H 19 Rack Mount 1RU 3 5kg 41 L X 22 5 W X 4 4 H Front Panel KVM 0811 Rear Panel KVM 0811 j 1 2 3 SEALE 5 iz KVM 1611 Daizy chain Cable Diagrams PC Port Special Cable ACC 2001 ACC 2002 HDB15 pin male to one HDDB 15 pin and Mini Din 6 pin special cables AT to PS 2 keyboard adapter Optional Din 5 pin Male to Mini Din 6 pin Female Daisy Chain Cable ACC 2009 PS 2 Cable Mini Din 6 pin Male to Male y 4 7 j VGA Cable HDB15 pin Male to Male 2 Hardware Installation Before installation please make sure all of peripherals and compute
7. To press both PC1 button and bank button of master bank simultaneously can reset KVM switch This reset action will not only return KVM switch back to initial state Check the password but also re check all of slave banks which connected to mast KVM Switch If you add a new KVM Switch as a slave bank please use reset button of master KVM Switch to automatically assign a new ID to it You can view this new slave bank go through OSD menu The PC ports of KVM Switch does not be reset by reset command Keyboard Hot Key Commands You can also conveniently command KVM switch by switching ports through simple key sequences To send commands to KVM switch the SCROLL LOCK key must be pressed twice within 2 seconds You will hear a beep for confirmation and the keyboard is in hot key mode If you have not pressed any key in hot key mode within 2 seconds It means to key in any key follows up Scroll Lock Scroll Lock key the keyboard will back to under Operation System control state Below are the different hot key commands m gt within 2 seconds Previous Channel Next Channel Note You also could press up arrow key or down arrow key longer time to speed up selecting the destination port 11 Q D II Previous Bank O U U 28 II Next Bank Port No SZZ SZ lt A 1 4 4 port Scroll Bank Port No 1 8 8 port Lock No 1 8 Oor1 1 16 16 port
8. cccceccecccccceccaceacececceauaceccecessecuacecuecestecusttauscesuecesneas 6 ST PAI OCA 9 6 SP OZ REY BOARD EEEE AET E TE T STEP AP SZ MOUSE nerne T STEP 5 PC PORT CONNECTION ccceccececceccccecccceccccececcecceceaceceacecesueauececuecesueceentauecesueaesneas 7 STEP ORG PORT 8 STEP 7 PC PORT KEYBOARD witsiscaieltccrete secre poco dann asec 8 STEP 8 DOUBLE CHECK wicuntescuvettecriiactauahnvegivatbnuc tiene 8 STEP 9 REPEAT STEP 5 TO T 2 9 STEP LOIPOWER ON bi siiaiina tics wicathaanisaciaanisaceea niente ticaniaaaieeetans 9 10 10 E 10 7 SEGMENT BANK LED INDICATION 2 ccceccececceccccccecccccacececcecuccet
9. ed up in powered on PC port or non powered on PC port or empty PC port The resolution of OSD menu is fixed to 1024X768 for non powered on PC port or empty PC port 2 When you pop up the OSD menu window go through the hot key you will see the following small window on your monitor A The 1ST line bar is Bank no B The 2nd block is your PC system name list You will find the system number list from 01 to 04 if the current box is 4 port or from 01 to 8 if the current box no is 8 port or from 01 to 16 if the current box no is 16 port You can define your PC name in maximum 8 characters The factory default of 16 port KVM switch PC name is from SYSTEM 01 SYSTEM 02 SYSTEM 16 and 8 port KVM switch is from SYSTEM 01 SYSTEM 02 SYSTEM 08 Besides the sun symbol xx near to the PC name represents the PC system is powered on To use up arrow key or down arrow key to select port for destination PC name After you have selected the PC port already you can press the ENTER Key to switch the PC port you want immediately To use PgUp key or PgDn key for selecting previous or next Bank no or Box No 16 To press INS key for editing PC name After finishing the edit please press Enter key for saving information To use Tab key to select items like Bank OSD SCAN CHANGE PASSWORD CONSOLE ON OFF etc
10. er adapter from the switch Although the PCs connected to KVM Switch unit are able to support enough power to the stand alone switch KVM Switch unit still needs a power adapter for daisy chain more banks If forgetting the password you typed please contact your supplier 19
11. r or keyboard is not detected at PC side The computer boot up fine but keyboard doesn t work Make sure the keyboard works when directly plugged into the computer Try adifferent keyboard but use only 101 102 or 104 key keyboard The Mouse is not detected during PC boot up Make sure the mouse works when directly plugged into the computer Make sure the mouse is a true PS 2 mouse A combo mouse will work just as long as it is set for PS 2 mode with the correct adapter Try a different mouse Avoiding moving the mouse or pressing the mouse buttons when switching ports Avoiding switching ports during shutting down the PC process When you switch one PC port to another PC port the best scan time setting need to be set to 5 sec or more Normally the VGA monitor change one resolution mode to another will take one or two seconds So the minimum scan time has fixed in 5 seconds even user set it as 2 seconds The power switch is off but the switch still works fine or power adapter is unplugged from the switch but the switch still works fine KVM Switch unit draws the power source from power adapter and all PC s PS 2 port Some PC s PS 2 port can support enough power for the switch but some PC s PS 2 port like laptop notebook computer etc is unable to supply enough power for the switch In order to make sure the system can work steadily please do not set power switch to off state or remove the pow
12. rs have been turned off This example of installation is based on 8 port Rack Mount KVM Switch and you also can think that 4 port Rack Mount KVM Switch and 16 port Rack Mount KVM Switch have the same installation procedure Step 1 Rack Mounting Find a convenient place to put your KVM Switch Its 19 rack mount form factor makes it ideal mountable on 19 rack When mounting to a rack attach the included brackets to the sides of the KVM Switch Take note of the length of your cables so that your computers KVM Switch keyboard mouse and monitor are distanced properly Step 2 Local Console Connect the monitor to the KVM Switch Using the attached cable or the one included with your monitor connect it to the HD DB 15 female port on the back of the KVM unit labeled with the monitor symbol at the CONSOLE connector Step 3 PS2 Keyboard Connect the keyboard to the KVM Switch If you have an AT type keyboard you will need an AT to PS 2 adapter Step 4 PS2 Mouse Connect the mouse to the KVM Switch Step 5 PC Port Connection Now the PC connections will be made with the monitor VGA connections first Connect a VGA cable 15 pin HDDB Male Male with the Male side to both of the PC and the rear panel of the KVM switch to the connector labeled VGA Repeat this for all PCs Step 6 PC Port Mouse Connect the first computer s mouse cable to the KVM Switch If using a PS 2 cable connect one end to the PS 2 mouse po
13. rt on the computer and the other end to the PC1 PS 2 mouse port on the back of KVM Switch If using a serial mouse cable optional connect one end to a DB 9 serial port on the computer and the other end to the PC1 DB 9 serial mouse port on the back of the KVM Switch If you need Serial DB 9 to PS2 Mini Din 6 pin adapter please contact your supplier Step 7 PC Port Keyboard Connect the first computer s keyboard cable to the KVM Switch Using another PS 2 cable connect one end to PS 2 keyboard port on the computer and the other end to the PC keyboard port on the back of KVM unit If your computer has an AT type keyboard port you will need a PS 2 to AT keyboard adapter Step 8 Double Check Double check all of the connections You can check the color of keyboard and mouse connector to make sure the keyboard and mouse cables go to the correct ports Step 9 Repeat Step 5 to 7 Repeat step 5 to 7 for the remainder of the computers Step 10 Power On Attach the power supply to the KVM unit and plug the other end into an electrical receptacle Now you will see the LED for Port 1 light up and you will hear a beep Switch on your monitor Note Please be remind to plug in power adapter Although the PCs connected to KVM Switch are able to support enough power to the stand alone switch KVM Switch still needs a power adapter for daisy chain more banks If you forgot to plug in power adapter on the status of daisy chain it ma
14. sceacsneaeecesueacsneasentass 10 RESET BUTTON 11 KEYBOARD HOT KEY caceaeiadedasdacadardbeadeasas 11 DAISY CHAIN CONNECTION nnmnnn 14 Os fal og ert ne ce ene ey 15 ON SCREEN ee ene 16 5 19 1 Introduction Controlling multiple PCs from One Keyboard Mouse and VGA Monitor KVM switch is loaded with features such as 19 Rack Mount Size Daisy Chain up to eight units On Screen Display Manual Password security searching PC server name Hot key Control Push Button and Auto Scan Control It has complete keyboard and mouse emulation for simultaneous PCs boot up process Features 4 8 16 port KVM switch is 19 rack mount size design Support Microsoft Intellimouse Microsoft Intellimouse Explorer Logitech Net Mouse or the other fully compatible MS mouse Support DOS Win3 X Win95 98 98SE 2000 ME XP WinNT Netware Unix Linux Hot Plug Add PCs or Remove Connected PCs for Maintenance without Powering Down the KVM switch or PCs Very High Video Q
15. uality Up To 1920X1440 Bandwidth Software Required easy PC selection via On Screen Display Manual Push Buttons Hot Keys Support eight characters password protection and search PC server name Auto Scan Mode for monitoring PCs and flexible Scan time from 5 99 seconds Keyboard status restored when switching PCs LED Display for easy status monitoring Buzzer sound for switching port confirmation Built in one extra daisy chain port and no waste any PC port DIP switch setting needed and auto detect daisy chain bank Package Content KVM 0811 8 Port PS2 KVM Switch 8 port PS2 KVM Switch 1 PCS AC to DC Power Adapter 1 PCS Rack Mount Kit 1 SET KVM 1611 16 Port PS2 KVM Switch 16 port PS2 KVM Switch 1 PCS AC to DC Power Adapter 1 PCS Rack Mount Kit 1 SET System Requirements KVM 0811 8 Port PS2 KVM Switch Console side One VGA Monitor One PS 2 Keyboard One PS 2 Mouse Computer side 8 HDDB 15 pin male to one HDDB 15 pin and Mini Din 6 pin special cables KVM 1611 16 Port PS2 KVM Switch Console side One VGA Monitor One PS 2 Keyboard One PS 2 Mouse Computer side 16 HDDB 15 pin male to one HDDB 15 pin and Mini Din 6 pin special cables Technical Specifications Model No PC Port Console Port PC Port Connector All Female Type Console Port Connector All Female Type Daisy Chain Port Connector All Female Type PC selection PC Port LED Bank 7 segment LED
16. y cause the unexpected status occurred 3 Operation The power on state of 8 16 port KVM switch When you power on KVM switch it will ask you the password the default password value is eight zero 00000000 Please key in eight zero and enter the same value at retype field Note Before you are not familiar with the operation of OSD manual please don t change the password i e keep default eight zero 00000000 value Otherwise if you have set the password and unfortunately forget the password you need send it back to your distributor for maintaining the password Default password is eight zero 00000000 Push Buttons Pressing the individual button cyclically through all the ports or the respective button to get PC port you want PC port LED Indication You can press the button in order like mentioned above diagram When you select the PC port and this PC is shut down or this PC port is disconnected to the PC the selected PC port LED will flash When you select one of eight PCs ports and this PC is powered on the selected PC port LED is lit 7 Segment BANK LED Indication When you would like to view the next bank KVM switch please press BANK push button cyclically to the destination bank The bank LED will be changed from bank 1 to the maximum daisy chain level and then to press BANK push button once back to the bank 1 Bank1 Bank2 Bank3 MAX BANK Reset Button
Download Pdf Manuals
Related Search