QUANTISENSOR: SHORT INSTRUCTION TO INSTALL SOFTWARE
Contents
1. QUANTISENSOR SHORT INSTRUCTION TO INSTALL SOFTWARE 1 Close all applications Be sure Quantisensor is NOT connected to your computer 3 Introduce the Quantisensor CD ROM release 380 Version 2005 in your computer Auto run executes the installation if not start install exe When your system has been check press Continue Wait until the software asks for KEY NUMBER Introduce the Key Number that is written on the backside of the dipstick holder black reader tray and click Continue button 7 When installation is complete pull out the CD and restart your computer for the first time ool When restarting the system installs the driver for Logitech camera Plug the camera into any USB port when it is requested 0 At the end of installation answer Yes to restart the computer again 2 00 11 When the computer is restarted click on the Quantisensor icon green sphere on your desk 12 Introduce the password for administrator admin 13 The first time you are using the Quantisensor three 3 additional steps are required to set up the software and the camera 14 In the main menu go to the Extra Change Advanced Mode Measurement Laboratory Be sure Practice mode is disconnected 15 In the main menu go to the Extra Add test continue and select the file Tetracycline v9 UK RDF and click on open yes and OK 16 In the ma2. e right button of the mouse and then click with the left button on Propriety last down and un select the reading only Finally click on Apply and then on OK The file is now installed at the right place in the directory TEST DATA but the file is not yet available for measurements Please proceed as follow 1 Open the program by a double click on the Quantisensor icon 2 Select administrator and use the password admin if not modified 3 In the main menu go to the Extra Add test continue and select the file Tetracycline v10 UK RDF or other and click on open yes and OK The file Tetracycline v10 UK TST has been created Pay attention the extension of the file is TST This file will appear in the list of Type of Test when you run a New measurement
3. identification ID number Leave it blank if you are not willing to get the printing of that number 9 LOAD THE DIPSTICK ON THE HOLDER IN ORDER TO HAVE ARROWS FACED TO THE OUTSIDE OF THE READER 10 Click OK You have a live view of the inside of the camera chamber this helps you to check if dipstick is in the right position in the tray with arrows to the left side of your screen In the even you have written something as ID on the paper of the dipstick it appears on the right side of that screen 11 Click Continue The system takes 10 pictures of the dipstick before showing the result Data are automatically stored into your computer At any time you can make a new measurement or load a previous one If you wish to print than go to the print mode to preview how the report look s like before generating the printout FOR FURTHER INSTRUCTION PLEASE READ USER MANUAL QUANTISENSOR SHORT _INTRUCTION TO INSTALL NEW TYPE OF TEST 1 Exit Quantisensor program 2 Introduce the CD Tetracycline V10 or other into your CD reader With the issue 380 they are included in the original CD and are already installed go to next point 1 3 Copy the file Tetracycline v10 UK RDF into the following directory C RAPID TEST DATA If you have chosen another place for the program do not forget to copy the new file in the right directory named TEST DATA 4 When the icon appears click on th
4. in menu go to the Extra Change Address to introduce your own Company or organisation information These will appear in the printing report of any measurement The system is now ready to perform routine dipstick measurements At each time you run Quantisensor the password admin is requested You may change if you wish or add new account for other users follow instruction in READER USER MANUAL FOR FURTHER INSTRUCTION PLEASE READ USER MANUAL QUANTISENSOR SHORT INTRUCTION FOR USE 1 Connect the Quantisensor to the USB port 2 Double click on the Quantisensor icon 3 Select the user and introduce the password Watch the bottom left side of your screen to check if computer load camera module There are 5 major actions in the menu on the topside of the screen New Measurement Load measurement import export Print Exit 4 Click New measurement and proceed as follow 5 Add the name of the file where you want to store the data of this measurement At each time you can either keep or select one existing file name or re type a new file name if you wish This helps you to store the data measurements into appropriate files for easy recovering 6 Select what TEST to perform 7 Introduce the reagent lot number It is not allowed to perform one measurement without introducing the batch number of the kit that is used 8 Introduce a sample
Download Pdf Manuals
Related Search