Commander Field Service Module General Use Guide
Contents
1. 3 Ensure the Commander Handheld is running the Commander application 4 Using the Commander Handheld barcode scanner scan in the Commander Gateway serial number ID Duplication Prohibited Without License From 13 Streetlight Intelligence Inc Pn Ba Lumen IQ Commander Field Service Module s General Use Guide Streetlight ZE INTELLIGENCE Point the optical scanner window a few inches from the bar code label and hold steady D Press the Scan activation button and center the red aiming beam over the bar code label a Lumen iQ nA Cone ied ji 008 2010 Streetlight Intelligence D 92 N Made in Canada Lumen IO Communication Gateway BINE 10 ENOS 0 Figure 18 Commander Gateway Serial Number ID Barcode Optical Scanner Activation Button Figure 19 Barcode Scanner Functionality Duplication Prohibited Without License From 14 Streetlight Intelligence Inc Bann Lumen IQ Commander Field Service Module Streetlight General Use Guide INTELLIGENCE lf communications is successfully established a green Gateway icon indicates Commander is ready to communicate with Lumen Controllers The following two subsections provide more information regarding Commander Handheld and Gateway communications status monitoring ig Commander Pe ey dZ Build 1 1 0 21264 Tue 08 18 2009 11 57 AM Maintenance Gateway ID Commands Figure 20 Gateway Indica2. Streetlight gt INTELLIGENCE Lumen IA Commander Field lt Service Module General Use Guide Document Number UIG 000024 Issue Date May 12 2010 Revision 1 0 Revision History Author Description E 0 rv 12 2010 e Jensen JP Release V Warrior o e Copyright 2008 10 Streetlight Intelligence Inc All rights reserved Patents pending in the United States and other jurisdictions Streetlight Intelligence Lumen IQ creating eco logically brilliant communities and their respective logos are trademarks of Streetlight Intelligence Inc StreetlightIQ com and LumenlQCentral com are domain names of Streetlight Intelligence Inc Other products and services mentioned in this document are identified by the trademarks or service marks of their respective companies or organizations No part of this publication or any software included with it may be reproduced stored in a retrieval system or transmitted in any form or by any means including photocopying electronic mechanical recording or otherwise without the prior written permission of the copyright holder Streetlight Intelligence Inc SLQ provides this document as is without warranty of any kind either expressed or implied included but not limited to the implied warranties of merchantability and fitness for a particular purpose SLQ may make changes or improvements in the equipment software or specifications described in this document at
3. by the U S Government agencies U S Government Export Restrictions User shall adhere to the U S Export Administration Regulations EAR currently found at 15 C F R Sections 730 through 744 and shall not export or re export or release the technology software or any source code to a national of a country in Country Groups D 1 or E 1 or export to Country Groups D 1 or E 1 the direct product of such technology if such foreign produced direct product is subject to national security controls as identified on the Commerce Control List currently found in Supplement 1 to Section 774 or EAR unless property authorized by the U S Government These export requirements shall survive any expiration or termination of this Agreement Title Streetlight Intelligence Lumen IQ Commander Field Service Module General Use Guide Streetlight Intelligence Inc 19 6782 Veyaness Road Victoria British Columbia Canada V8M 2C2 Tel 1 250 544 0147 Fax 1 250 544 0148 This page intentionally left blank Lumen IQ Commander Field Service Module Streetlight General Use Guide San Table of Contents Dan e e E E E RM RM HH r BB Ha eee Who Should Use This Guide sees eee How to Use This Guide e esse NOCES INEO e NN SN SN eee nee nee nee neon et nee ene nen eT ii Eel ear ll r bb d ii Tris CE CW OTA mm j r remo 1 2 The Commander Handheld D e lt c 3 1c 10 52 5k05414b010 554 4b4k02 4i4 ak nk a ka k ba 1 2 1 Charging
4. cour C Calendar Contacts p gt Command Bar Figure 3 Features of the Main Windows Display Screen The power button suspends wakes up or powers down resets the device depending on how the Power button is used Press power button yellow button once Exit Suspend Press power button once wait for device to wake up Soft Reset Press and hold the power yellow button for 10 seconds lf the device is suspended the current applications will remain open and will be available immediately when the device exits suspend mode wakes up The Suspend mode conserves battery power while undocked or unplugged from the vehicle power adapter Back Space Space Figure 4 The Keyboard Functions Duplication Prohibited Without License From 3 Streetlight Intelligence Inc Lumen IQ Commander Field Service Module Streetlight General Use Guide Se The keyboard uses the standard QWERTY layout for the letters The Shift key is used for Capital letters Numbers special characters and capital lock feature shown in yellow lettering above applicable key on the keyboard require the Function Key to be selected The yellow light to the left of the function key indicates that this will be applied to the next keyboard selection The light will turn off after the next key selection The function key can be deselected by pressing the function key twice the light turns off The scroll and tab keys are available to scroll through text
5. any time and without notice These changes may be incorporated in new releases of this document This document may contain technical inaccuracies or typographical errors SLQ and its subsidiaries waive responsibility for any labor materials or costs incurred by any person or party as a result of using this document SLQ and any of its subsidiaries or other affiliates shall not be liable for any damages including but not limited to consequential indirect or incidental special damages or loss of profits or data even if they were foreseeable and SLQ has been informed of their potential occurrences arising out of or in connection with this document or its use Computer Software Copyrights The SLQ products described in this manual include copyrighted SLQ computer programs stored in semiconductor memories and other media Laws in Canada and other countries preserve for SLQ certain rights for copyrighted computer programs including the exclusive right to copy or reproduce in any form the copyrighted computer program Accordingly no part of this software or any documentation included with it may be reproduced stored in a retrieval system or transmitted in any form of by any means including photocopying electronic mechanical recording or otherwise Unauthorized reproduction or distribution of this program or any portion of it may result in severe civil and criminal penalties and will be prosecuted to the maximum extent possible under the law F
6. the Bater eee eee 1 2 2 Date and Time Update Required sss sese eee eee 2 2 3 Keyboard and Buttons sse eee 2 2 4 Writing on the Screen eee eee ee 4 2 4 1 Using the Onscreen Keyboard sese 2AL USNO BOCK Le eleis zENMDDDNMMDN N gt z NN DAI2 JAi o NDMTMD 6 2 4 3 Using Letter Recognizer css eee eee eee 6 2A H Ee R la eyl eT 7 2 5 USING the GDR eee 7 AE eo eK kla ieie errs E am 7 2 5 2 Capturing a GPS Reading sees 7 2 5 3 GPS Bearing and Distance sse eee 8 2 6 Using the Bar Code SCANNET Ly k kilcna n kikan rkan b ba k a karak ka kya nak kalan ab kanan waki 8 NT WOMmmanGel el Kale e r EE 9 REl iG Ter ONG AMO essere deye daye dey kaye k ba xelek ke keka k bek k k dee Key bay n 9 eA Bees eh T 10 3 3 Connecting to the Central Database sese eee eee 11 3 3 1 Establish Active Sync Connection ese eee e ee eee eee kU 11 3 3 2 Synchronize Commander with Central EE 12 3 3 3 Software Updates sss 13 4 Communications Between Commander Handheld and Gateway 13 4 1 1 Status of Commander Handheld Connection to the Gateway 15 4 1 2 Checking Gateway Status Using the Gateway LEDSs U jjUjj 15 Arles ale Way L O ENO aectcececereacctesencssaceaceaccecenectacsecesseedecesnceceaeatcecseeaae 16 PAO CII X OPE tan deatednnadinctatadududupatoasiwnedatudaeatatudutetatesumudatsdusntadudagudadatoonteadatens 17 PMG Me G GPO SENOS ea c mz o _ _ a w 17 B Com
7. the battery charging range of 0 to 40 C 32 to 104 F the standard battery pack takes up to four hours to charge the extended battery pack takes up to five hours The handheld should be returned to the Duplication Prohibited Without License From 1 Streetlight Intelligence Inc Bn an Qi ee Lumen IQ Commander Field Service Module Streetlight General Use Guide INTELLIGENCE docking station and the docking station should be powered up to charge the handheld computer The appearance of the steady green light on the status LED implies that the device is 95 charged 2 2 Date and Time Update Required Upon receiving the Commander Handheld and anytime after the battery has been removed or drained check that the date and time are correct 2 3 Keyboard and Buttons The Commander Handheld is powered on and off using the yellow Power button While powered up the screen can be turned off to conserve power and turned back on for viewing using the Screen Light button The screen can also be turned on by touching the screen Power Screen Light Figure 2 Power and Screen Light Buttons On initial power up the main windows screen will be displayed Duplication Prohibited Without License From Streetlight Intelligence Inc Pn Qi Lumen IQ Commander Field Service Module Streetlight General Use Guide _INTELLIGENCE Start Menu Status Display a uu CER b B Wednesaay une au
8. Serial Number ID Barcode 14 Figure 19 Barcode Scanner Functionality sese eee eee 14 Figure 20 Gateway INGICAtOIS eseni isan ka kahr kana na k zan ab aiiin 15 Figure 21 Commander Gateway LED Indicators u EEE 16 Duplication Prohibited Without License From Streetlight Intelligence Inc Lumen IQ Commander Field Service Module Streetlight General Use Guide Q INTELLIGENCE USING THIS GUIDE Who Should Use This Guide This document is intended for use by personnel that will be using the Commander Handheld and Commander application in the field It assumes that the user already has a general knowledge of the Lumen IQ Adaptive Lighting System overall and the components of the Lumen IQ Commander Field Service Module How to Use This Guide This document assumes that 1 The user is familiar with the following documents Lumen IQ Adaptive Lighting System Overview 2 The Lumen IQ Commander Field Service Module components including the Lumen IQ Commander Docking Station and Lumen IQ Commander Gateway are installed and setup as outlined in the Lumen IQ Commander Field Service Module Installation and Setup Guide This document is meant to be used for product familiarization prior to performing field service For additional field service information the following documents are provided 1 Lumen IQ Luminaire Enabling Kit Retrofit Manual Model C225 C300 2 Lumen IQ As
9. connect to the Central database This means that the Commander Handheld must have access to the Internet while inserted in the Duplication Prohibited Without License From 9 Streetlight Intelligence Inc Lumen IQ Commander Field Service Module Streetlight General Use Guide s Commander Docking Station connected to a computer refer to section entitled Lumen IQ Commander Field Service Module Installation and Setup Guide Start the Commander Application by selecting Commander from the Intermec Windows Start menu or from the Windows Programs screen The Login Screen will be displayed gt Start oe O42 ee Th sday ER an b September 13 2007 Tap here to seb owner inornata No unread messages nan No tasks EI No upcoming appointments Device unlocked gi JTE Contacts Figure 13 Start Menu 3 2 Logging In A user name and password is required for Commander This user name and password is setup in the Lumen IQ Central Asset Management System Central With the appropriate privileges the same username and password provide access to the Central client lf there are multiple Commander Handhelds and or users it is important to have a separate username for each user Work is assigned to individual users and appropriate data is transferred to the Commander Handheld based on the user logged into the device when the unit is synchronized with Central Duplication Prohibited Without License From 10 Street
10. e Streetlight General Use Guide es ee INTELLIGENCE Data Synchronization may take several minutes The status of Central s synchronization is displayed in a status area just below the Sync with Central button K T Synchronize with Central P Figure 17 Synchronize with Central Status Area 3 3 3 Software Updates The user should check for software updates at least once per week and when notified by Streetlight Intelligence of an available software upgrade To execute this function a connection must first be established through Active Sync To update software 1 On the Commander Handheld start the Commander application by selecting the Start Menu gt Commander 2 Select Commands gt Check for Software Update This will update the software This command should be run at least once per week and when notified by Streetlight Intellivence of an available software upgrade 4 Communications Between Commander Handheld and Gateway When changing Commander Handheld and Gateway pairings or if communications Is lost establish communications between the Commander Handheld through a specific Commander Gateway by performing the following steps 1 If the Commander Handheld or Gateway are new ensure Commander Handheld has been synchronized with Central so that it has the latest configuration which includes the list of Commander Gateways configured for your system Refer to Section 3 above 2 Ensure the Gateway is powered
11. ention to important installation operating and maintenance instructions Comments lf you have comments questions or corrections related to this guide please contact streetlight Intelligence Inc 19 6 82 Veyaness Road Victoria British Columbia Canada V8M 2C2 Telephone 1 250 544 0147 Fax 1 250 544 0148 Duplication Prohibited Without License From Streetlight Intelligence Inc _INTELLIGENCE Lumen IO Commander Field Service Module Streetlight General Use Guide _INTELLIGENCE 1 Introduction The primary purpose of this User s Guide is to provide users of the Lumen lq Commander Field Service Module with an introduction to e How the use the features of Lumen IQ Commander Handheld Intermec CN3 e How the Commander application works including the look and feel of the user interface and the underlying principles of operation e How to establish and verify communication between the Commander Handheld and Commander Gateway 2 The Commander Handheld Device The Commander Handheld is an Intermec CN3 handheld computer which runs the Windows Mobile 5 operating system and includes e GPS e Wifi 802 11 e Barcode scanner e Basic QWERTY keyboard e Touch screen Commander is normally shipped with a 14 hour battery Figure 1 Intermec CN3 2 1 Charging the Battery The battery pack should be fully charged before you use the CNS for the first time If temperatures are within
12. ilt in Optical Scanner that is used to read barcodes The Optical Scanner is located on the top of the device The scanner is activated by pressing the lower blue button on the left side of the device or large blue button in the top row of the front keypad Duplication Prohibited Without License From Streetlight Intelligence Inc Lumen IQ Commander Field Service Module Streetlight General Use Guide Se ZAR INTELLIGENCE Optical Scanner Activation Button Figure 12 Barcode Scanner Functionality The barcode scanner is used to scan the Luminaire ID and Controller ID during installation and maintenance Although the scanner has 2 0 Megapixel resolution the scan interpretation is still very dependent on the quality of the scan label As a backup the Luminaire and Controller IDs may be entered manually using the keyboard To use the Scanner e Point the scanner window a few inches from the bar code label and hold steady e Press the Scan button and center the red aiming beam over the bar code label The aiming beam is smaller when the scanner is closer to the bar code and larger when it is further away For best results position the scanner as close and as perpendicular to the bar code as possible while still being able to capture the entire bar code with the aiming beam 3 The Commander Application 3 1 Starting the Application The first time the Commander software is started the Commander Handheld must be able to
13. k Recognizer Character recognition software gives you a fast and easy method for entering information Letters numbers and punctuation you write are translated into typed text Tap the input panel arrow then tap Block Recognizer Write a letter in the box When you write a letter it is converted to typed text that appears on the screen For specific instructions on using Block Recognizer with Block Recognizer open tap the question mark next to the writing area Tap for assistance Figure 8 Scroll and Tab Keys 2 4 3 Using Letter Recognizer With Letter Recognizer you can write letters using the stylus just as you would on paper Tap the input panel arrow then tap Letter Recognizer Write a letter in the box When you write a letter it is converted to typed text that appears on the screen For specific instructions on using Letter Recognizer with Letter Recognizer open tap the question mark next to the writing area R E L Tap for assistance xn Figure 9 Scroll and Tab Keys Duplication Prohibited Without License From 6 Streetlight Intelligence Inc m Lumen IQ Commander Field Service Module Streetlight General Use Guide ae Z INTELLIGENCE 2 4 4 Using Transcriber With Transcriber you can write anywhere on the screen using the stylus just as you would on paper Unlike Letter Recognizer and Block Recognizer you can write a sentence or more of information Then pause and let Transcriber change the w
14. k to the streetlight network rec gt 0 B Q e 0 18 2 Figure 21 Commander Gateway LED Indicators 4 1 3 Gateway Timeout Error There is a known issue with Windows Mobile where enable proxy becomes selected under Network Settings If you see a Gateway Timeout error when attempting to sync with Central and you are not using a proxy server make sure proxy is not enabled To display the proxy settings select Settings from the Start menu tap the Connections icon select the Set up my proxy server link and select the Proxy Settings tab Duplication Prohibited Without License From 16 Streetlight Intelligence Inc Lumen IO Commander Field Service Module Streetlight General Use Guide IN TE L LI G EN C E APPENDIX A Intermec GPS Settings To check the GPS settings on Commander use the Start flag toolbar to select Settings gt System tab 1 Tap the GPS icon On the Programs tab set e GPS program port None On the Hardware Tab set e GPS hardware port to COM3 e Baud rate 57600 On the Access tab set e Manage GPS Automatically Y Exit to the System tab and tap the iGPS icon On the Power tab set e Fix Interval 0 seconds On the Advanced tab set e Enable WASS M e Enabled extended ephemeris M From Commander insure there is a network connection and select Update GPS Ephemeris Data from the main form command menu B Commander Settings The range meters used to loca
15. light Intelligence Inc m Lumen IQ Commander Field Service Module Streetlight General Use Guide aes INTELLIGENCE Login Streetlight Intelligence Commander Usemame pasword Save Password Cancel Figure 14 Commander Log In Screen The first login requires a network connection but future logins do not user password Is locally encrypted The Login Screen is displayed whenever the Commander application is started You must enter your user name and password to enable Commander If your password on the server changes continue to use your old password until you have a network connection then use the new password Commander will verify the new password with Central when connected 3 3 Connecting to the Central Database Commander must communicate with the Central database regularly to get information required to support installation and maintenance activities work orders transfer completed work information back to Central and to get software updates that may be required 3 3 1 Establish Active Sync Connection Connection to Central requires the Commander Handheld to be docked in the Commander Docking Station with Active Sync running and establishing a communications channel through Active Sync To do this 1 Place the Commander Handheld in the Commander Docking Station The Commander Handheld will automatically turn on and Active Sync will start on the computer and establish a connection to the Comma
16. mand r SCMINGS ccicscad ccercads decseadedecsandedeceatdsdastaadedccsecdedactesdsdagecadedecseedeaca 17 Duplication Prohibited Without License From Streetlight Intelligence Inc Lumen IQ Commander Field Service Module Streetlight General Use Guide San List of Figures Sel T Memet GNS eaer MMMNMNNNMN N NM e MMMDa aM MDIME 1 Figure 2 Power and Screen Light Buttons l i 2 Figure 3 Features of the Main Windows Display Screen eee eee eee eee 3 Figure 4 The Keyboard Functions ccccsscccseeecesceceeeeceeeeceueeseusecsueessusesseeeeas 3 PIQUE eeel le T D T 4 Figure 6 Scroll and Tab Keya sese 5 PIQUE 7 Sclolland TaD N Oy SL u ewi sall abek debe ba q iqba a Wi qa M ink ka n k d 5 Figure 8 Scroll and Tab Keya eee 6 Figure 9 SCloll ANG TaD ya cerae eE HH EEE ED BM MMM M J MG m M ARE nD bn PDT YO 6 Figure 10 Scroll and Tab Keys sese eee 7 Figure 11 Bearing and Distance Displ amp y eee 8 Figure 12 Barcode Scanner Functionality sese eee eee eee 9 zul ans an EN D DD DDDD D HHEEEHNHEEnEEnEnEEnEE E E a nan nRMR aRmN na aRNono DHREoa 10 Figure 14 Commander Log IN Screen sss sese eee 11 Figure 15 Connected Status for Active SYNC eee ee eee ee kez 12 Figure 16 Commander Main Screen Sync with Central Button 12 Figure 17 Synchronize with Central Status Area sese AE 13 Figure 18 Commander Gateway
17. nder Handheld Duplication Prohibited Without License From 11 Streetlight Intelligence Inc anni Lumen IQ Commander Field Service Module Streetlight General Use Guide SR A communications channel through Active Sync has been successfully established when the following screen will be displayed on the computer with the Status identified as Connected Microsoft ActiveSync File view Tools Help Explore l Connected Hide Details Information Type Status Figure 15 Connected Status for Active Sync 3 3 2 Synchronize Commander with Central Once a connection has been establish through Active Sync Commander can be synchronized with Central to get configuration updates download installation and maintenance work orders or upload installation and maintenance data To synchronize with Central 1 On the Commander Handheld start the Commander application by selecting the Start Menu gt Commander 2 Inthe Commander application select the Sync with Central button on the main screen This button is disabled if Commander is not properly cradled and connected to the computer g STI Commander 4 12 16 Version 1 0 0a Installation Maintenance Test Work Advanced eee qi Sync with Central 4 Figure 16 Commander Main Screen Sync with Central Button Duplication Prohibited Without License From 12 Streetlight Intelligence Inc Lumen IQ Commander Field Service Modul
18. oles to different individuals or teams Commander displays the current GPS latitude and longitude readings as well as the number of Satellites being used to calculate these readings In order to Duplication Prohibited Without License From 7 Streetlight Intelligence Inc anni Lumen IQ Commander Field Service Module Streetlight General Use Guide capture a pole location the user must lock the displayed GPS latitude and longitude prior to creating the new pole location The accuracy of your pole location depends on the number of satellites Commander uses and your proximity to the pole Commander should be held as close as possible and allowed to settle for a minute or so before locking the GPS readings For more information on Adding Poles see section Error Reference ource not found 2 5 3 GPS Bearing and Distance On some screens Commander indicates the distance and bearing from the current location to the location of a pole Click pole to select Yy ok 1210 0 W 1247 0 W 1247 0 W 1247 0 W 1283 0 W 1320 0 W 1357 0 W Figure 11 Bearing and Distance Display The distance calculation uses two GPS positions a very short measurement period and assumes the earth to be a perfect sphere which it is not For these reasons distance accuracy can only be within approximately 25 meters and becomes less reliable at distances less than 30 meters 2 6 Using the Bar Code Scanner The Commander Handheld has a bu
19. ritten characters to typed characters 2 EB al spe 4W Tap for assistance b gt i Figure 10 Scroll and Tab Keys Refer to the Intermec website www intermec com for complete CN3 documentation 2 5 Using the GPS The Commander Handheld device has an onboard GPS module The accuracy varies from 3 meters to 25m Best results are achieved when there is good satellite coverage more satellites in better range GPS receiver is stationary and the readings are measured over a period of several minutes Because GPS satellites are in motion as well as going out of or coming into view the GPS values are constantly recalculated even if the receiver is stationary This means the accuracy will constantly be changing 2 5 1 Acquiring GPS Reading Ensure the GPS settings are set as described in Appendix A After reboot or exiting suspend mode the device may take several minutes to acquire a GPS reading Generally this may take only a few minutes but allow for up to 15 minutes lf there is no GPS reading after 15 minutes check the Intermec GPS settings refer to Appendix A If the settings are correct exit Commander and execute a soft reset by pressing and holding the power button 2 5 2 Capturing a GPS Reading The onboard GPS can be used to capture the GPS location of poles as part of a pre installation survey or during the installation If the pole locations are captured prior then Central can be used to assign work on specific p
20. sembly Management Luminaire Assembly and Controller Activation User Manual Lumen IQ Adaptive Lighting System Installation and Maintenance Manual Lumen IQ Controller Installation and Operations Manual Model C225 Lumen IQ Controller Installation and Operations Manual Model C300 Lumen IQ Controller Installation and Operations Manual Model L300 Se ot a e Lumen IO Controller Installation and Operation Manual FP PM 01 and FP LS 02 Supplement Models C225 8 Lumen IQ Controller Installation and Operation Manual FP PH 01 Supplement Models C225 C300 L300 9 Lumen IQ Station Installation and Operations Manual Other system documents available include 1 Lumen IO Central Asset Management System User Manual 2 Lumen IQ Assembly Management Module Installation and Setup Guide 3 Lumen IQ Central Asset Management System Installation Guide Duplication Prohibited Without License From i Streetlight Intelligence Inc Bw EN Lumen IQ Commander Field Service Module Streetlight General Use Guide Notices and Conventions Symbol Meaning Indicates the presence of dangerous voltage within and outside the product enclosure that may constitute a risk of electric shock serious injury or death if proper precautions are not followed N N Indicates the presence of hazards that may cause minor or moderate injury damage to property or damage to the device itself if proper precautions are not followed Directs att
21. tab through fields and add tabs in text Scroll Left ier re Scroll Right Figure 5 Scroll and Tab Keys 2 4 Writing on the Screen Your computer has a stylus for selecting items and entering information on the touch screen e Tap touch the screen once with the stylus to select options open or close applications or launch menus from the Command bar e Drag and hold the stylus on the screen and drag across the screen to select text You can either type using the onscreen keyboard or write using Block Recognizer Letter Recognizer or Transcriber In either case the characters appear as typed text on the screen Use the Input Panel to select the type of keyboard or writing methods Tap the Input Panel icon in the bottom task bar to show the Input Panel Tap the arrow next to the Input Panel icon to see your choices Duplication Prohibited Without License From 4 Streetlight Intelligence Inc Lumen IQ Commander Field Service Module Streetlight General Use Guide aes Word Completion is available with keyboard and writing input methods When Word Completion is turned on Commander anticipates the word you are typing or writing and displays it above the input panel When you tap the displayed word it is inserted into your text at the insertion point Tap the arrow next to the Input Panel icon and select Options to enable Word Completion F Settings r 23 04 ok Suggest words when entering text Suggest af
22. te the nearest pole can be modified in the Settings screen main menu Commands Settings This screen also shows the current Commander build version Duplication Prohibited Without License From 17 Streetlight Intelligence Inc
23. ter entering letters Suggest word s Add a space after suggested word Replace text as you type Input Method Word Completion Options Figure 6 Scroll and Tab Keys 2 4 1 Using the Onscreen Keyboard To display the touch screen keyboard tap the keyboard icon displayed on the bottom taskbar On the soft keyboard that is displayed tap the keys with your stylus 123 1 2 3 4 5 6 7 8 9 0 Tah 1 w e r t y ulilalplr cAPja s alf ajh ijk ij Shift 215 T c 19 TR 1 n n Cu ad EMELE Complete Menu Figure 7 Scroll and Tab Keys e Totype a single uppercase letter or symbol tap the Shift key To tap multiple uppercase letters or symbols tap the CAP key e To convert to uppercase tap the shift key first or hold the stylus on the keyboard letter drag up e To add a space tap the space key or drag the stylus to the right across at least two keys Duplication Prohibited Without License From 5 Streetlight Intelligence Inc Pn d Lumen IQ Commander Field Service Module Streetlight General Use Guide s L INTELLIGENCES e To backspace a character tap the backspace key or drag the stylus to the left across multiple keys e To insert a carriage return tap the enter key or tap and hold the stylus anywhere on the keyboard and drag down e To use larger keys tap the input panel arrow tap Options select Keyboard from the Input method drop down list then select Large 2 4 2 Using Bloc
24. tors 4 1 1 Status of Commander Handheld Connection to the Gateway Commander displays a Gateway link indicator at the bottom left hand side of the screen just above the Commands Menu A status area to the right of the Gateway indicator displays the serial number of the Gateway Commander is communicating with The Gateway indicator has 3 states Indicates Commander cannot communicate with the scanned Gateway If there is no Gateway serial number displayed to the right of the indicator you must scan in a valid Gateway ID barcode Indicates Commander is attempting to establish communication with the scanned Gateway Indicates Commander is connected to the scanned Gateway and is ready to communicate with Lumen Controllers 4 1 2 Checking Gateway Status Using the Gateway LEDs The Commander Gateway provides 4 status LED indicators on the back of the unit Duplication Prohibited Without License From 15 Streetlight Intelligence Inc Lumen IQ Commander Field Service Module Streetlight General Use Guide e 1 WiFiLink This LED illuminates when the Commander Handheld has established a communications link with the Commander Gateway 2 PWR this LED illuminates when the Commander Gateway internal power supply is operational 3 MeshData this LED illuminates when data Is being transferred from the streetlight network to the WiFi network 4 WiFiData this LED illuminates when data is being transferred from the WiFi networ
25. urthermore purchase of SLQ products shall not be deemed to grant either directly or by implication estoppel or otherwise any license under the copyrights patents or patent applications of SLQ except for the normal non exclusive license to use that arises by operation of laws in the sale of the product Government Approvals User must at its expense obtain and maintain any government approvals consents licenses authorizations declarations filings and registrations as may be necessary or advisable for use of SLQ software and associated documentation User must also pay and indemnify SLQ for any sales taxes use taxes and any other taxes imposed by any jurisdiction as a result of the use of SLQ s software and associated documentation Restricted Rights Use duplication or disclosure of commercial computer software and its associated documentation under SLQ s copyrights and or trade secret rights is subject to the restricted rights set forth herein User s use of the software and associated documentation in any manner constitutes user s agreement to these restricted rights Distribution to U S Government Agencies Licensee will comply with all applicable laws rules and regulations to preclude the acquisition of unlimited rights to technical data software and documentation provided with the software to a governmental agency and ensure the inclusion of the appropriate Restricted Rights or Limited Rights notices required
Download Pdf Manuals
Related Search