User Manual
Contents
1. Thank you for purchasing the Bioenno Power BPP 240 Renewable Power Pack Introduction The Bioenno Power BPP 240 Power Bank is a light weight compact renewable power pack based on a LiFePO4 battery The unit can also be used to supply mobile power to your cell phone tablets and particular laptop computers The unit also includes an LED status display showing the power remaining The unit is rugged and durable Typical Applications Powering computers and electronics Contents 1 Bioenno Power BPP 240 1 Power cord 1 User Manual Specifications summary 12 in x 9 in x 4 875 in 305 mm x229 mm X 124 mm Battery Capacity 240 Watt Hours 12 v x 20 Ah 240 Watt Hours 110VAC 200W atts Max 12VDC 5A USB 5VDC 1 A AC 110VAC Input Unit includes a built in AC to DC Charger for charging the internal LiFePO4 Battery DC Solar Panel Input Unit includes a 20A Solar Charge Controller which allows for 25VDC maximum input from a solar panel for charging the unit Operating Temperature Operating Temperature 10 deg C to 30 deg C Cycle Life Approximately 2000 times For the full specification please visit www bioennopower com Caution Do not disassemble Exercise caution when using the unit to prevent short circuits Do not expose to rain or excessive moisture Do not expose to flames avoid exposure to direct sunlight if temperature exceeds 30 C or 86 F Last Revised 12 17 2014 Instructions for Use AC Char2. ging 1 Attach the power cord to the 120VAC input 2 TurnonAC USB Main and DC switches 3 Make sure to charge the unit for 5 hours before first use 4 Itis not suggested to charging and discharge the unit at the same time Charge the unit first then disconnect from AC power Solar Panel Charging 1 Remove the metal connector that protrudes from the unit by twisting the metal cap near the base of the connector then pull it out Next unscrew the black plastic portion from the metal body of the connector There are 3 wire receptacles where wires from the solar panel can be soldered to Note the number and the corresponding receptacles Receptacle 1 is positive 2 is negative 3 is unused When viewed with the receptacles facing away from you 2 Solder the power wires from the solar panel to the connector ensure the polarity is correct by checking with a meter 3 Use a 40 Watt maximum Solar panel for charging the unit Please note that the solar panel is not included Using the unit 1 Turn on the Main switch first then turn on AC USB switch a beep will sound or DC switch depending on your application 2 Press the red button on the battery capacity gauge to check battery level Contact Us Mail Bioenno Power 12630 Westminster Ave Suite H Santa Ana CA 92706 E mail sale bioennopower com Phone 41 888 336 7864 Bioenno Power BPP 240 User Manual
Download Pdf Manuals
Related Search