GB/US . . . . .GH2 .Ceiling .Hoists
Contents
1. Transport running in the rail system Push the GH2 hoist manually into the rail system GH2 2 GH2 2R operates fully automatically on the rail system by pressing the hand control IR sender The GH2 hoist must not be exposed to sudden changes in temperature For instance you must not take a cold hoist into a hot bathroom or similar 2 04 Safety functions The emergency stop and emergency lowering device should be used only in an emergency If contrary to expectations it becomes necessary to use the safety functions the fault must be located and remedied before using the GH2 hoist again Please contact your supplier Re EMC If electromagnetic or other influences occur between this product and other products these products must not be used together The function of the emergency strap Pulling the red strap will activate the following functions 1st pull Emergency stop 2nd pull Emergency lowering requires a constant light pull Emergency stop If the GH2 hoist does not respond to the hand control when in use pull the red strap lightly to deactivate all functions except the emergency lowering function When the emergency stop has been activated the GH2 hoist will no longer function The emergency stop s contact arm must be pushed in manually before the GH2 hoist will be ready for use again Guldmann GB US 1263 12 2011 90069 2 01 Guldmann GB US 1263 12 2011 90069 2 01 0 N M After d2. GH2 2 and GH2 2R Speed on straight rail at full load 15 cm sec 6 sec Soft start stop GH2 HD Max l d e a E a a E ee 250 kg 550 lbs Max number of lifts in series AC 92 with 85 kg 1000 mm 92 with 187 Ibs 40 32 with 250 kg 1000 mm 32 with 550 Ibs 40 Max number of lifts in series DC 72 with 85 kg 1000 mm 72 with 187 Ibs 40 28 with 250 kg 1000 mm 28 with 550 Ibs 40 Lifting speed with 85 kg load 187 Ibs 1680 mm min 66 min with 250 kg load 550 lbs 1020 mm min 40 min with max 5 kg load max 11 Ibs 3300 mm min 130 min Dual speed GH2 GH2 2 GH2 2R and GH2 HD Weight GH2 amp GH2 HD excl lifting hanger 8 7 kg 18 Ibs GH2 2 amp GH2 2R excl lifting hanger 9 0 kg us 20 Ibs Lifting hanger aissa et habiter bera bene min 2 0 kg 4 4 lbs Sound level acc to DS ISO 3746 Lifting MOTO e ian rr Re Rex mer ex rape Ee ee 52 dB A Drive MOOK 22 254 ce ex eeu d atop diem der es Rn EAS Ud 52 dB A Protection class Hoist and hand control IP20 IP 24 Microswitches in hand control IP67 Electrical specifications Power supply iussus bp RR Rr ence UC Pob eed xe does 25V AC Power supply sieben nd de Laden detente HR d 24V DC O tput transformer shat ver secte
3. Check all functions of the product with and without load as described in section 2 Check that the emergency stop functions Check that the emergency lowering device functions Check that the green indicator lamp lights up when the hoist is activated Check that the yellow charging indicator lights up when the batteries are recharging Remove cover screen Checking the electrical state of the hoist Check batteries for Input voltage Output voltage Check electrical functions and signals Check the wiring circuit for faults or defects Check the cable lead ins Check the power supply plugs etc Check the electrical safety of the product according to IEC 60601 1 1988 5 03 Checking the mechanical state of the hoist Clean the hoist to remove dirt and other impurities Inspect and evaluate vital components Replace defective and worn components Check and tighten all moving parts Lubricate the hoist Where applicable treat the surface with silicone oil Replace cover screen Go through the checkpoints under item 2 again to make sure that everything functions Have new problems arisen or been found under item 7 If new problems have arisen return to item 3 If there are no new problems the inspection is completed When a service inspection including service work or exchange of components has taken place the final check must comprise a weight test with the product s nominal load Troubleshooting D
4. no additional cost to you Guldmann retains sole discretion as to whether the equipment will be repaired or repla ced This warranty shall be null and void if the equipment is operated and main tained in any manner inconsistent with its intended use or the instructions provided with the product Further in order for the warranty to remain in effect for the full Warranty Period all service to the equipment must be provided by a Guldmann designated technician Any parts or components repaired or replaced by a Guldmann designated technician will be guaranteed for the remainder of the Warranty Period The warranty does not cover any part of the equipment which has been sub ject to damage or abuse by the user or others The warranty does not cover any part of the equipment which has been altered or changed in any way by the user or others Guldmann does not warrant that the lifting device functions will meet your requirements be uninterrupted or error free The warranty set forth is in lieu of all other express and implied warranties whether oral written or implied and the remedies set forth above are your sole and exclusive remedies Only an authorized officer of Guldmann may make modifications to this warranty or additional warranties binding on Guld mann Accordingly additional statements such as advertising or presentati ons whether oral or written do not constitute warranties by Guldmann Service or Repair Contact Guldmann Repa
5. only by the Guldmann Service Team or by a qualified fitter in accordance with Guldmann s instructions 4 05 Disposal of GH2 incl batteries Local and national regulations for environmentally responsible recycling must be observed Batteries should always be taken to approved recycling points Guldmann GB US 1263 12 2011 90069 2 01 Guldmann GB US 1263 12 2011 90069 2 01 5 00 Service and lifetime 5 01 Lifetime GH2 has an expected lifetime of 15 years provided that the service inspections mentioned under point 5 02 are observed Replacing components Batteries printed circuit boards and lifting straps may be replaced only by a qualified fitter or by the Guldmann Service Team 5 02 Service inspection According to the international standard EN ISO 10535 Hoist for the transfer of disabled persons Requirements and test methods a safety inspection of the hoist must be performed at least one a year The GH2 must be inspected by a qualified fitter or by the Guldmann Service Team The service inspection includes a written report specifying what has been inspected and replaced Worn or defective components must be replaced by new components from Guldmann Spare parts drawings and documentation can be ordered from the manufac turer or the distributor Visual inspection of the hoist Check for wear irregularities or other types of damage to the hoist Testing the hoist as though in normal use
6. 10 gt 40 C 30 70 700 gt 1060hPa 14 gt 104 F GH2 should be stored at temperatures between 10 and 40 C 14 and 104 F GH2 should be stored at an air humidity between 30 and 70 GH2 should be stored at an air pressure between 700 and 1060hPA 4 00 Maintenance and storage 4 01 Cleaning Clean the GH2 hoist with a damp cloth and standard household detergent Never clean GH2 with strong acid base or alcohol Never clean GH2 in an autoclave 4 02 Storage The GH2 hoist should be stored in a dry room with a maximum humidity of 7096 The hoist should be stored with the emergency stop activated to prevent consumption of battery power For long term storage remove the 4 pole plug with white black red and yellow connection leads The measures regarding ESD safety are valid in this connection See point 1 09 4 03 How to prevent and avoid corrosion If the GH2 hoist is mainly used in corrosive surroundings such as swimming pools it must be ordered with a special corrosion preventive surface treatment Do not expose GH2 to sudden cold heat as an example do not move a cold GH2 into a hot bathroom 4 04 Daily maintenance Check the lifting sling for wear and damage before using the hoist Never use a damaged or defective lifting sling Never use the GH2 hoist if the lifting strap is damaged or defective Contact your supplier to order a new lifting sling or lifting strap replacement The lifting strap may be replaced
7. B US 1263 12 2011 90069 2 01 GH2 2 ceiling hoist with built in drive motor GH2 2 ceiling hoist with a built in drive motor operates fully automatically on the rail system When using a GH2 2 please note that the motor uses approx 1 second to accelerate and stop the hoist respectively Thus when stopping the unit from max speed the motor must be cut off 10 15 cm before the desired position When the hand control is activated for a shorter period of time it is possible to position the hoist with a high level of accuracy GH2 2 must run on its own power and should not be pulled through the rail system Run the hoist into the rail again Check GH2 2R ceiling hoist with built in drive motor and infrared remote control GH2 2R has a built in drive motor and IR receiver which is controlled by the IR sender With this sender it is possible to control all the functions of the hoist Furthermore the IR sender can be used to control e g switch tracks combi locks and turntables mounted with IR receivers The cable mounted hand control must remain fitted to the hoist This will ensure that the hoist can always be operated if the IR sender is mislaid or if its batteries run dry In certain cases an unladen hoist with a drive motor can due to its low unloaded weight have difficulty in driving through for example switch tracks if the switch is not open in the direction in which the hoist is passing To provide extra security f
8. G GB US GH2 Ceiling Hoists Vers 2 01 Guldmann CI C C EE GH2 Ceiling Hoists Hoist numbers 120001 xxxx 1 00 2 sez Purpose and ds6 i2 vbu lou pere gx a maintes marne se 3 1 01 Farti Manufacture g iier treo tene Runde earn bur OR Pera e Po e pele tree 3 1 02 32 52 4804 Purpose and use o sirami ekaa A bd e dates Dani etd 3 1 09 imas Important precautions 3 1 04 21522 Load limits on your GH2 system 4 1 05 es Unpackingand preparation ERI ens hrec e md d s 4 1 00 5 22 22e Mounting the lifting hanger before use 5 aE O sie The lifting sling mortem er eni pir eee Dac eirca 6 VOB iii en Before the hoist can be US d 444 teen m emnes T 1 09 os Powet Supply us cde means de hele aie a LE da L tou 7 1 10 5x Los zs TASWN kit eee o rannen ele ne end EUER rer ben e ong ate 8 Mer GH2 2 ceiling hoist with built in drive motor 9 1 12 dms GH2 2R ceiling hoist with built in drive motor and infrared remote control ues terme teh hr om xe Rer YR ew cate 9 2 00 s Description of functions 10 2 01 1s PiclograMS 1212 nes ain da dent sud Mod esca sns Ae at dates 10 2 02 dudes Indicator lamps 2 oss RE Enn eere Eden tue mee Ds 11 2 09 ee ee ODperatiONir ss tme ee eR E AE tear R aa AAR mee
9. Or EWO S Guldmann GB US 1263 12 2011 90069 2 01 Guldmann GB US 1263 12 2011 90069 2 01 1 06 Mounting the lifting hanger before use Lifting hangers made by other manufacturers Guldmann shall not be liable for faults or accidents that occur as a result of using lifting hangers made by other manufacturers If you are in any doubt regarding the choice or use of the lifting hanger please contact your supplier Strap with snap hook Use lifting hanger type 21X87 or the X lifting hanger type 21387 when using GH2 with a snap hook GH2 with a snap hook can also be used for Swing The snap hook is sewn onto the strap and cannot be removed Please note Bath chairs bath stretchers and horizontal stretchers must be attached to the snap hook Strap attachment Use lifting hanger type 21X70 or Horizontal Lifter Type BS when using GH2 with strap attachment Mount the lifting hanger as illustrated Loosen the pointed screws 2 Release the axle journal 3 Mount the lifting strap 1 on the lifting hanger 4 Introduce the axle journal again 3 Use a 1 5 mm Allen key to tighten the pointed screws 1 07 The lifting sling A lifting sling with four to six lifting straps designed for mounting on hooks with a minimum diameter of 8 mm 0 3 should be used when using a Guldmann lifting hanger Slings made by other manufacturers Guldmann shall not be liable for faults or accidents that
10. a bracelet The technician installer connects the mat to a grounding point for instance a radiator or a water pipe He must then put on the bracelet and connect it to the mat If the technician Bring the two hoists as close to each other as T i A Release the hook and strap from hoist B which is using a ladder it is important that the mat is placed on the step on which he is standing If it is not possible to find a grounding point the mat and the bracelet must be used as a minimum Only then is it allowed to work with the PC Board or components where it is possible to come into contact with the PC Board The Swing kit Note If you wish to use the Swing kit with the GH2 hoist this must be specified when ordering possible The lifting hanger is attached to the hook on hoist B Pull out the free strap and hook from hoist A and ZE attach it to the eye Pull out the lifting strap on hoist B a little further and 2 retract the lifting strap on hoist A When the transfer swing has been completed there is no longer any load on the lifting strap on hoist B now bears no load Return the lifting strap to hoist B until the hook is needed again Return the lifting hanger on hoist A to working 7 zz height The transfer through the door has now been completed A B Guldmann GB US 1263 12 2011 90069 2 01 Guldmann G
11. a risk of water being sprayed directly onto it Except for GH2 with protection class IP24 If the GH2 hoist fails while in use it should not be used further and the local Guldmann representative must be contacted for a repair If the GH2 hoist is used where the distance between the rail system and the floor exceeds 3 metres 120 the lifting strap must be extended with an extension strap GH2 is controlled by a microprocessor PC Board which can be damaged by static electricity if touched without the necessary precautions See point 1 09 Thus the electronics should be looked after by quaified technicians only 1 04 Load limits on your GH2 system Read the labels which indicate the maximum load limits for the components The component which has the lowest load limit i e the lifting hanger the lifting sling etc determines the entire system s maximum load limit This maximum load limit must not be exceeded Please note that the load may change when different components are used such as lifting hangers lifting slings etc 1 05 Unpacking and preparation Visual check of the GH2 If it appears that the GH2 hoist has been damaged when you unpack it it must not be used until it has been checked by a qualified person or by the Guldmann Service Team Contents of the box 0 GH2 hoist Hand control Transformer charger Manual o Label for rail system Charging station for DC charger S Friction enhancer GH2 2R NO
12. by declare that Product GH2 GH2 2 GH2 2R amp GH2 HD incl lifting hanger suspension and charging system Type No XXXXXX YYYY ZZZZ x XXXXXX Reference No of the product YYYY Serial No of the product in the production year ZZZZ Production year was manufactured in conformity with the provisions in EN 10535 Hoists for the transfer of disabled persons requirements and test methods EN 60601 1 1990 Medical electrical equipment A1 1993 Part 1 1 General requirements for safety A2 1995 A12 1993 EN 60601 1 2 Medical electrical equipment Part 1 General requirements for safety 2 Collateral standard Electromagnetic compatibility according to the Council Directive 93 42 EEC of 14 June 1993 Skejby 01 09 03 Place and day of issue Mi W Product responsible Technical a 21 USA and countries outside the EU A Users guide Before using the product read the entire operation manual including warranty B WARRANTY Guldmann warrants its equipment is free from material defects under normal use and will perform substantially in accordance with the specifications set forth in documentation provided with the equipment This express warranty shall be in effect for one year from the date of original purchase and installation the Warranty Period If a valid claim is made during the Warranty Period for malfunction or equipment defect Guldmann will repair or replace the equipment at
13. e dels a eie Bienes uses 11 2 04 Safety TUNCHONS haicear iee EE ne pep p EN d ud eed dete 12 205 R chardings xir nurse pce dan eme y aves dod ur ES es qe ons 13 2 065 cds ACCESSONIES M PDC mm 14 3 007 nie Transport usc dater danse E x xus mita peed Sex NN Ne putes 15 4 00 Maintenance and storage 16 4 01 nins Cleaning 1r pentes et dete deter dette s e ale d dd 16 4 02 sis Storage 223 eee dia wie sehen d HIR eae e pel e eee eee 16 409 ns How to prevent and avoid corrosion 16 4 04 Daily mainteriance a oec be eph gue ur Iudei o Rees 16 4 05 Disposal of GH2 incl batteries 16 5 00 e Service and lifetime 17 HOT Lif tiM 2 454404 IS ER tn ar ete dr yao e b nba d 17 SO2 od cack Service Irispectlon 2 eax prae RR cd nn Re eS ds wade Arb 17 ERO e see MCOUDIGSMOOUUNG 25e hp rosaceo ttr et EEA Bo veis TRESE 18 6 00 ese Technical specifications 19 7 00 EC declaration of conformity 21 MSIE ad s See QA USA and countries outside the EU 22 j MM Users guide DEDERE 22 B erete Waranty recie me srne a dw hg edes ge d eR eR 22 Guldmann GB US 1263 12 2011 90069 2 01 Guldmann GB US 1263 12 2011 90069 2 01 1 00 P
14. eactivation of the emergency stop activate the hand control twice the first time to reset the PC Board the second time to switch on the hoist Emergency lowering If the GH2 hoist breaks down the electric emergency lowering device can be used to lower the user safely The emergency lowering device is operated by a constant pull on the red strap which is also used to activate the emergency stop If the red strap is not pulled constantly the emergency stop will be active rather than the emergency lowering device and it will not be possible to operate the GH2 hoist before the unit is reset Explanation to labels Type B In accordance with EN 60601 1 Warning Before use cleaning and service read the user manual technical documentation Description of strap safety device Overloading the hoist pulling the strap crookedly or if the strap is twisted the strap safety device will be activated and the GH2 hoist will be deactivated If the yellow mark on the strap is visible it is not allowed to lift with maximum load 2 05 Recharging When the GH2 hoist is not in use it should be parked in the recharging unit This will maintain the batteries and ensure them a long lifetime When GH2 is being recharged the yellow charging indicator on GH2 s infor mation face is illuminated The indicator light flashes while the batteries are being recharged The light indicates that the GH2 hoist and the transformer charger are correctly co
15. er ated eee eae ps deed 40VA GQutpout recharget meet Bourne Rerum cron ce fee m re es 32VA Supply voltage transformer or recharger 100 240V Current consumption GH2 8 5A at max load Current consumption GH2 2 drive motor 2 5A at max load Max power consumption GH2 240VA CHANG IMO TIMMS si usen Emeritus wena reden esent max 8 hours Lead batteries sealed and maintenance free 2 x 12V Rechargeable batteries order no 933015 Safety Measures Safety cut off for Strap Approx 45 driving direction Approx 10 transverse direction Battery protection at too low voltage Switches off when voltage goes below 17 volt Periodic load lifting motor operation pause 15 85 dynamic supervision Periodic load drive motor operation pause 20 80 dynamic supervision 20 Guldmann GB US 1263 12 2011 90069 2 01 Guldmann GB US 1263 12 2011 90069 2 01 7 00 EC declaration of conformity CE Guldmann EC DECLARATION OF CONFORMITY Manufacturer V Guldmann A S Graham Bells Vej 21 23A DK 8200 Aarhus N EAN country code 57 EAN distribution No 07287 Phone 45 8741 3151 Fax 45 8741 3131 Representative Company Address Country Phone Here
16. h the GH2 HD hoist The GH2 motor is powered into the center of the turntable By pressing the Switch the turntable rotates 90 Press again and the turntable returns to the first position Safety This product is mechanically protected against derailment and jamming Guldmann GB US 1263 12 2011 90069 2 01 Guldmann GB US 1263 12 2011 90069 2 01 Combi lock manual and electric The Combi lock is used when a single track rail system is to be linked up to a room covering rail system or when two room covering rail systems need linking The Combi lock ensures that the two systems are locked together in situa tions such as transfer from a single track rail system in a bedroom to a room covering system in a bathroom The Combi lock is available as an electric or a manual model It is activated by either pressing the Switch or pulling on the cord Safety This product is mechanically protected against derailment and jamming Infrared remote control Switch tracks turntable and combi locks can be supplied with receivers for IR remote control Batteries Battery Guldmann type FG20401 item No 933015 Charger Charger Mascot type 2240 item No 937030 Transformer Transformer Guldmann type DTS 2420 item No 937000 3 00 Transport Guldmann recommends that the GH2 hoist is always transported and stored in the original packaging Explanation of symbols on the GH2 packaging L 1
17. he size of the sling should be opposite the spine Lead the leg straps along the outer sides of the user s shins and beneath the thighs between the hollow of the knees and the hip joints Cross the leg straps over each other in front of the user All four lifting straps are now ready to be attached The lifting sling can now be mounted on the lifting hanger Lifting to and from lying position in bed Bring the lifting hanger over the centre of the person to be lifted Place the lifting hanger parallel to the user s shoulders Turn the user onto his or her side The lifting high back sling should be placed Guldmann GB US 1263 12 2011 90069 2 01 Guldmann GB US 1263 12 2011 90069 2 01 so that its top is at the same height as the top of the user s head Now lay the sling over the user so that the centre band follows the user s spine Turn the user onto his or her back and pull out the remaining part of the lifting sling Place the leg straps beneath the user s thighs and cross them over each other All four lifting straps are now ready to be attached and the lifting sling can now be mounted on the lifting hanger It is an advantage to elevate the head of the bed so that the user is sitting up Only persons who have received competent instruction regarding the use of lifting equipment and fitting of slings should start using the hoist 1 08 1 09 Before the hoist can be used Battery connection Attach 4 pole plug in acco
18. ir for an authorization to return any defective item during the Warranty Period You will be provided with a return authorization number and address for returning the item for warranty service or replace ment Do not return items to Guldmann under warranty without receiving a Return Authorization Number 22 Guldmann GB US 1263 12 2011 90069 2 01 Guldmann GB US 1263 12 2011 90069 2 01 If mailing the item pack it carefully in a sturdy carton to prevent damage Include your Return Authorization Number a brief description of the problem and your return address and phone number Guldmann does not assume the risk of loss or damage while in transit so it is recommended you insure the package 23 90069 2 01 Guldmann GB US 1263 12 2011 rime to care l V Guldmann A S Corporate Office Graham Bells Vej 21 23A DK 8200 rhus N TIf 45 8741 3100 Fax 45 8741 3131 info guldmann com www guldmann dk Guldmann Inc 14401 McCormick Drive Unit A Tampa FL 33626 Tel 800 664 8834 Tel 813 880 0619 Fax 813 880 9558 info guldmann net www guldmann net
19. ive motor Guldmann GB US 1263 12 2011 90069 2 01 Guldmann GB US 1263 12 2011 90069 2 01 A ED15 zd 2 02 CE marking Type B in accordance with EN 60601 1 Read instructions before use Permissible operation time for instance operation 3 min and pause 20 min Please don t throw away with household rubbish but recycle the product Indicator lamps The colours and functions are as described below Green On The hoist is active Blinking The hoist batteries need recharging Off The hoist is switched off Yellow On Charging indicator indicates that connection is established between the hoist and the recharger transformer 2 03 Operation Lower Bow Hand control Pressing a button on the hand control automatically switches on the GH2 hoist The GH2 will automatically switch off after approximately ten minutes when not in use Lift Lift Lower Move hoist towards the open arrow on the information panel of the hoist Move hoist towards the closed arrow on the information panel of the hoist 11 NA Lift lower A Move hoist towards the open arrow Move hoist towards the closed arrow Infrared remote control eee on the information panel of the hoist on the information panel of the hoist e Hs Note There must be a load on the strap corresponding to the weight of Guldmann s lifting hanger before the lifting lowering function will operate
20. nnected The green circle of lamps on the bottom of the hoist will blink if the batteries are running low the GH2 hoist will then be able to lift only a certain number of times and the batteries must be recharged To recharge the batteries place the GH2 hoist in the charging unit marked with the battery symbol on the rail The batteries in a GH2 hoist installed in a MIDI rail will be constantly recharged throughout the length of the rail 2 06 Accessories Guldmann ABC lifting sling and lifting hanger Order a special brochure from your distributor the manufacturer or www guldmann com Extension strap The extension strap must be used wherever the distance between the lower edge of the rail and the floor exceeds 3 metres 120 For example if the distance between the rail and the floor is 3 5 metres 140 you should order a 500 mm 20 extension strap Switch track manual and electric Switch tracks are used for changing direction in a rail system Manual switch tracks are activated by pulling on a cord attached to the switch tracks This changes the direction of travel and GH2 then runs in the direction indicated by the cord Electric switch tracks are activated by pressing the attached hand control Safety This product is mechanically protected against derailment and jamming Turntable The turntable is used in track systems where the hoist needs to run in several directions The turntable must not be used wit
21. occur as a result of using lifting slings made by other manufacturers If you are in doubt regarding the choice or use of the lifting sling please contact your supplier Guldmann shall not be liable for faults or accidents due to incorrect use of the lifting sling or for reasons of inadequate attention on the part of the carer or user Working with the GH2 hoist It is only necessary to pay attention to the user s functional level and the carer s technique as the GH2 hoist makes no special requirements as regards space or power consumption and runs easily in the rail system The user should only be lifted just clear of the underlying surface and should be moved at this height Attaching the lifting sling Attach the hooks that face the user to the uppermost set of straps from the back Attach the lowermost set of straps from the legs to the hooks that face away from the user Lifting to and from sitting position When lifting a user from e g a wheelchair move the GH2 towards the person to be lifted The lifting hanger should be at the same height as the person s chest and should not be moved further in over the user than to approximately mid thigh position Place the lifting hanger parallel to the user s shoulders Place the lifting sling behind the user s back between the back of the chair and the user s back The centre band of the lifting sling should follow the user s spine As for the slings type Active the strap showing t
22. oes the GH2 hoist fail to respond when buttons on the hand control are pressed Check that the emergency stop has not been activated Check that power is supplied to the hoist Contact the Guldmann Service Team The hand control may be defective Does the green lamp on the hoist blink when the batteries are recharging Check that the yellow charging indicator lights up when the hoist is put in the recharging position Check that the power supply is switched on Contact the local Guldmann representative or the Guldmann Service Team Guldmann GB US 1263 12 2011 90069 2 01 Guldmann GB US 1263 12 2011 90069 2 01 6 00 Technical specifications Dimensions A 595 mm 23 B 300 mm 12 C 148 mm 6 D 160 mm 6 E min 82 mm 2 F min 370 mm 15 G 1850 mm 73 Depth of Hoist 197 mm 8 GH2 GH2 2 and GH2 2R Max JOA cscs cte cet emt betty dus ei 200 kg 440 Ibs Max number of lifts in series AC 92 with 85 kg 1000 mm 92 with 187 Ibs 40 36 with 200 kg 1000 mm 36 with 440 Ibs 40 Max number of lifts in series DC 72 With 85 kg 1000 mm 72 with 187 Ibs 40 32 with 200 kg 1000 mm 32 with 440 Ibs 40 Lifting speed with 85 kg load 187 Ibs 1680 mm min 66 min with 200 kg load 440 lbs 1200 mm min 4T Imin with max 5 kg load max 11 Ibs 3300 mm min 130 min Dual speed
23. or unassisted users that the hoist runs smoothly through the track system it is possible to mount a friction enhancer in connection with the hoist s drive wheels Friction enhancers cannot be used in connection with a drive through charging station Friction enhancers are mounted as follows Move the hoist to the end of the rail making sure that the drive wheels are free of the rail The friction enhancer is placed over the wheels as shown The long pins on the friction enhancer must point in the direction of the nearest end of the hoist that the friction enhancer is functioning by holding onto the hoist with the drive motor in operation The hoist must pull strongly in both drive directions Description of functions The information panel on the GH2 hoist as seen from the floor 2 01 Pictograms Charging Emergency Emergency indicator lowering stop Example of a serial number label see variants of GH2 ceiling hoists under point 6 00 No 120001 1001 2005 max 200 kg 440 Ibs 24V AC DC FUSE 15AF 240VA ED15 IP20 kA CE V Guldmann A S Graham Bells Vej 21 23A DK 8200 Arhus N Tel 45 8741 3100 www guldmann com No 120001 1001 2005 max 250 kg 550 Ibs 24V AC DC FUSE 5AF 75VA ED15 IP20 kA CE OK V Guldmann A S Graham Bells Vej 21 23A DK 8200 Arhus N Tel 45 8741 3100 www guldmann com Nes 10 4 Direction of travel for GH2 2 with dr
24. rdance with the enclosed instructions The measures regarding ESD safety are valid in this connection See point 1 09 Emergency stop device The emergency stop device must be reset in order to connect power to the product To do this push the contact arm to which the red emergency stop band is fastened towards the product until it clicks Power supply GH2 is equipped with batteries that require regular recharging The power supply for charging and the battery charging point must be connected by a qualified engineer or by the Guldmann Service Team The transformer recharger supplied must always be used AC power supply When the power is supplied via the rails Midi rails an AC transformer Guldmann type DTS 2420 item No 937000 must be used For connection please refer to the installation guide If AC power supply is used MIDI rails the hoist will after use be constantly recharged throughout the length of the rail DC power supply When the power is supplied via the charging station a DC charger Mascot type 2240 item No 937030 must be used For connection please refer to the installation guide If DC power supply is used MINI MAXI and JUMBO rails the hoist shall after use be placed in the charging station for recharging The charging station is marked with on the rail Safety concerning static electricity ESD Service technicians and installers must use an ESD safety package consisting of a mat a ground wire and
25. urpose and use 1 01 Manufacturer V Guldmann A S Graham Bells Vej 21 23A DK 8200 Arhus N Tel 45 8741 3100 Fax 45 8741 3131 www guldmann com 1 02 1 03 Purpose and use Purpose GH2 is a ceiling mounted hoist that covers the need for lifting and moving people in hospitals at nursing homes institutions swimming pools riding Schools and in private homes Preconditions The preconditions for using the GH2 hoist are that the staff who operate this aid facility have received training the instruction offered by Guldmann to all customer groups in connection with the purchase of a ceiling mounted hoist has been received the carer pays close attention to the well being of the person being lifted the hoist is used in rail systems approved and tested in acc with Guldmann s stipulations installation and testing of rail systems should only be performed by Guldmann approved engineers the hoist is used with a Guldmann lifting hanger or with another suitable lifting hanger point 1 06 the hoist is used with a Guldmann lifting sling or other suitable slings point 1 07 Important precautions Read the instructions carefully before using the GH2 hoist GH2 s maximum load of 200 kg 440 Ibs and 250 kg 550 Ibs respectively must never be exceeded GH2 may only be used to lift people The red emergency stop and emergency lowering strap must be adjusted to the user s reach GH2 must not be used where there is
Download Pdf Manuals
Related Search