Home

the manual

Contents

1. 39 9 39 QUICK SETUP cvcosscsscccsesccvctasesauscecessuanteccsvsnasesexeedeccevetessssvescessenstessesvensesseedsesssvesdssdesceecessvendescessnacesuesdoadesseassssveodecssusnassos ense 40 CHANGE MOVEMENT AFTER GAME HAS STARTED sssssscssscssssscssscssssssssscsssssssscssssssssccessasssscceseassssssssnassssssssnascssssessasessssesssssssses 40 CHANGE BEFORE ANY BRIDGEMATES HAVE BEEN USED sssessssssececsesssceecceceescaececececeesesaecesccecseseaaeceeececeesesaecesececseneaaeceeeeseeeneaaees 41 CHANGE AFTER PEOPLE HAVE STARTED MEMBER NUMBER AND OR SCORE 41 REPLACING BRIDGEMATE DURING PLAY scssssessssssssesssvennsssonsesosesscssevsnessessensessonessosssvensesdescsesessventescessnesessnesdoadedsnassaveotenssnatessessense 41 SWISS TEAMS AND KNOCKOUTS wscsssssccscassvoncsecsvcvecssenssdoscevcscesoesssccesessncsecsvsnsessondsssscevensssdeuceecessvesdescevcvecesscesdoasassncesssveedacsessnesessvenss 42 PROCEDURES WHEN USING PLAYER ENTRY OF SECTION TABLE cssssssssssssssscsscsssssscnsccssscscnscsssssscnsssesssscnscsssssscnsssssnsscnssssssssones 42 SPECIAL REPORTS sisssisusscseccessacsvsossssesccccssensatsscsvsuesosexesdenceventsensoebucssessncsecsvsnsesdondssendevensssinucescsssventescevevasesseesvondestnesssdvesdacsessnasesevenss 42 EXPANDED DETAIL AVAILABLE ON WEBSITEG sssscsosssssssssnssssssscsnscs
2. Bridgemate Pro Scoring system Manual Chapter 8 Using Bridgemates with ACBLscore e Bridgemate normally operated by North e When Verification by East or West appears East or West must verify e Traveler should be viewed by all Bridgemate silently 2004 2015 Bridge Systems BV Adapted for North American use Bridgemate US LLC 2015 All information contained in this document is subject to change without prior warning Unless stated otherwise all persons and details mentioned in this document are fictitious No part of this publication may be reproduced and or published by print photoprint microfilm or otherwise or stored in a retrieval system without prior written permission from Bridge Systems BV Copyright 2004 2015 Bridge Systems BV All rights reserved Bridgemate Bridgemate Pro and the Bridgemate logo are trademarks and or registered trademarks of Bridge Systems BV in the Netherlands and other countries Microsoft and Microsoft Windows are trademarks and or registered trademarks of the Microsoft Corporation in the United States and other countries Every user should read and take notice of the Safety Instructions printed on pages 3 amp 4 of this manual Customers who have concerns with the Bridgemate Pro Control software End User License Agreement displayed when Bridgemate Pro Control software is installed and or the Bridgemate Scoring System Limited Warranty pages
3. Log files are saved in Other folder See Log file settings on Page 19 Bridgemate server Disable server detection See Chapter 3 Program Settings Options page 19 for option Does not disable server detection at startup settings on the General View Log file and Scoring program tabs Autopower off period 1 hour Go to Tools gt Options gt Bridgemate Options should be set as appropriate See the laminated Quick Setup Guide and Chapter 6 Bridgemate settings page 30 The Bridgemate Control Software is ready for use with ACBLscore Close the BCS program Configure Bridgemates 1 The TD Tournament Director Key is used to configure each Bridgemate 2 Each Bridgemate may be assigned to its own Section and Table 1 2 B1 B2 etc or Bridgemates may be configured for manual entry of the Section and Table by players at the table when a new game session is started See Chapter 5 page 23 Activating the Bridgemate 3 The default RF radio frequency channel is 0 If you experience transmission troubles with this channel change to another channel The channel selected in BCS for the Server must always be the same as the one set in all the Bridgemates The frequency range for North America is 902 927 mHz Note Bridgemates automatically shut off power when not in use Batteries need not be removed when not in use When Bridgemates are activated and communicate with the server a low ba
4. the TD menu option 0 The Bridgemate is returned to the start up screen and is logged off from the server See Chapter 5 for more information on how to reset the Bridgemates menu Server gt Show tables Log off table s See Chapter 4 Overview of tables The latter function can be used if you need to use another Bridgemate for a specific reason but cannot log off via the reset function A Bridgemate needs to be logged off before it can be replaced See Chapter 7 for more information 14 Chapter 3 Bridgemate Control software Board results Reading from the server Once the Bridgemates have logged in they will feed data to the server during the session These results are first saved in the server As long as the server is connected BCS retrieves data every second from the server and automatically stores it in the result file This is an automatic process and indicated by the following message in the status bar Status retrieving data from server If the server is disconnected for a while all results not yet sent to BCS will be retrieved from the server read and saved in the result file as soon as the server is reconnected Delayed reading and processing of scores is therefore possible It is advised however that the server is connected at all times during the session and BCS is running Results Round Monitor Board Monitor Result Matrix Viewing results Results that have been read and saved in the res
5. BCS Setup Verify BCS server connectivity Bridgemate Control Software C ACB File Session Server Tools Help Once the server has been activated by using batteries or the power adapter start BCS to see if it finds the server Normally BCS is started by ACBLscore Server information Value but to verify server connectivity Start BCS directly from the Windows start menu lola oe Pro at this time Go to Start All programs gt Bridgemate Pro gt Bridgemate Serial port 4 Control A small text bar will display while it searches for the server Hardware version 11 Firmware version 1 2 6 The BCS screen will appear and the server details displayed in the upper left Communication version 10 Battery level AC mains adaptor Server Information section should show Connected Channel Region North America Verify that the region is set to North America Chapter 8 Using Bridgemates II with ACBLscore 37 lt ar BGs options Go to menu Tools gt Options gt General 1 View Log file Scoring program Club single computer it ae 2 Optional Disable server detection unchecked aa ae Club single computer program at end of session Erase original records of deleted scores MUST be checked when Using ACBLscore eR PC Erase original records of deleted scores On the Log file tab with a Vista or Windows 7 PC use the
6. Set The new channel has now been set in the server System functions Update firmware The server s firmware may be updated in the future If there is an update download the new firmware from www bridgemate us and follow the instructions carefully Program Shutdown Power Outages Change PC The following website page describes actions that may be taken to recover from these special conditions www bridgemate us how to guides during a game program shutdown power outage change pc 22 Chapter 5 Use of the Bridgemate Pro scoring devices Chapter 5 Use of the Bridgemate Pro scoring devices The Bridgemate is a small device designed to enhance the enjoyment of bridge for tournament directors and bridge players alike The system enables you to enter results faster than before and is guaranteed to i prevent operator errors As well as allowing players to enter board results Brid emale the Bridgemate also feeds information to the players such as the achieved 4 j j v percentage on the board played and the traveler overview We are gt 4 Nr convinced that tournament directors and bridge players will appreciate the J 2 3 convenience of the Bridgemate 4 8 6 0 Preparing the Bridgemate for use a 2 xy The Bridgemates are individually packed in compact sturdy cardboard 2 oy boxes Each Bridgemate comes complete with four AAA batteries which must be inserted into the bottom of
7. Using Bridgemates Bridgemates Pro together If you have both a Bridgemate Pro and a Bridgemate II system it is possible to use both systems together to score a single event As Bridgemates II only communicate with a Bridgemate USB server and Bridgemates Pro only with a Bridgemate Pro serial server it is a requirement that both servers are connected to the computer To use both Bridgemate Pro Bridgemate Il in one event 1 Connect both a Bridgemate USB server and a Bridgemate Pro serial server to your computer The Bridgemate Pro server can be connected through the USB to serial dongle Please refer to the Bridgemate Pro manual for operating instructions of the Bridgemate Pro server 2 Start the Bridgemate system from your scoring program This will start the Bridgemate 11 system first 3 After BCS has been loaded and Bridgemates II have been activated click on Session gt Run Bridgemate Pro concurrently This will load a second copy of BCS and this copy will start the Bridgemate Pro server Both systems may now be used together 4 When the session is finished manually close both instances of BCS Please keep in mind the following when working with both systems together e All tables will be loaded into the Bridgemate II server and the Bridgemate Pro server You decide which tables are used by the Pro system and which by the 11 system As a consequence both systems may show that certain tables are not act
8. download openoffice org Paste the copied data into the OpenOffice org calc spreadsheet On the Text Import screen that will peeneceensceneseees Adjust column widths if desired Highlight and copy the data for your report e EXCEL spreadsheet alternate procedure advanced Excel user There is an alternate procedure whereby data can be imported into Microsoft Excel from the game s bws data file o Change the file suffix on the game data file from bws to mdb e g 130615A bws gt 130615A mdb This file is normally in the C ACBLSCOR GAMEFILE folder In Excel Data gt Get External Data gt From Access gt find amp select the renamed mdb file Select table window will appear Highlight the Received Data table and click Import Data window select Table and Existing worksheet gt Click o The Result column will be in the European Up down tricks format To create an American style Results column use an Excel formula such as this IF K2 LEFT J2 1 0 IF LEFT K2 1 K2 0 LEFT J2 1 K2 o Highlight and copy this new result column then paste it as values into the Result column o Delete un needed columns Chapter 8 Using Bridgemates II with ACBLscore 43 It is suggested the BCS column heading NS EW be changed to Declarer Below is a sample report Note This example includes the Lead
9. e g due to a power failure PC reboot or any other reason for BCS being shut down during a session There is no loss of data when BMR is used to restart the Bridgemate software 8 Special note If Bridgemate use was not enabled as shown in item 1 above BME Enable this section for Remote BML Locate Remote server there will be a BME command visible This should be used to enable the Remote Options Bridgemate Scoring System for each section in the game OK Chapter 8 Using Bridgemates II with ACBLscore 39 Read data from the Bridgemate Scoring System into ACBLscore gt The ACBLscore screen is normally visible on the PC and the BCS screen is minimized gt When you first key F11 or F9 the keyboard may appear to be inactive Use the mouse or touch pad to move the cursor within the ACBLscore screen and left click This will normally enable activate the keyboard Player Numbers If Player Numbers are to be entered at each table this will be done as each table starts to use a Bridgemate After play has started names are read from the result file into ACBLscore using the BMN command 11 gt BOMON F11 gt End amp highlight the BMN command line Press ENTER Special Note In multi section games the BMN command must be issued separately for each section ACBL Life Members enter their alpha character as anumber J 1 K 2 L 3 M 4 N 5 O 6 P 7 Q 8 amp R 9
10. 1 and 2 of this manual may return unused products at the customer s expense to Bridgemate US LLC for a full refund of the purchase price excluding shipping charges Bridgemate US LLC 350 Sawmill Creek Dr Nellysford VA 22958 434 361 1397 FAX 434 361 0220 sales bridgemate us www bridgemate us Table of Contents LIMITED WARRANT Yi evctsccssusscssssvseesssuscsssvessaccevsasssastsusssbendesnsscdenssdeesdeduessusteddasscusssecvedsndsedtasdssanshadssndaseses sasessendsdeacs scssdueasesssss 1 SAFELY INSTRUCTIONS sisssscsicsccsscsscdscntsssstescaesiassascadsssstcstncsdescsdenscceascsbanedsasescocsesasesdntcsdsccsstededsesadsduasivcdddensdascoassssadsent cedscvenass 3 INTRODUCTION Ssivccssccscssssssncsusscsenssssscdesussinstdssssssvensssnctssascstucstssace ntesbansevacessssssiatsensssestssiesccdsnsssatssscdsdusasscndscnsssdendsdeccsvetussesasesssce 5 CHAPTER 1 DESCRIPTION BRIDGEMATE SCORING SYSTEM cccssscssscssssscesssesssssssscsnscsssscssnscsssssssnassssssssnssssssses 6 DESCRIPTION OF COMPONENTS sissccecssssccsscevccccscasessssccecscsvescaccecsucescsscbssscsvetscsessascesdesecseseadeasasecsceseccdssdcescesccsesestcosaccsscccccsssesssseseseases 6 PROCEDURE wessscsceteisssiesscessssssedescuncdesvescessensesescesssdeccsscecsscsvavccccscesscscesensdscsvedscsdesessasdesecsessadeasaduatcececssdsdcascesscsesseveod ccssecccscevebusscevsnesses 8 CHAPTER 2 HARDWARE CONFIGURATION cssscsssscssssssssscsssccsnsscssscssnsssssscssnas
11. CONTROL SOFTWARE ccsssccssscssssscssscssssssssscssssscnscssssssssscssnssssssssssassssscsssasssssssssascoess 12 LAUNCHING BRIDGEMATE CONTROL dssssssesccdsecessecssecsedoacesseasseescedestenssessgesdsuedsessvonsscoucdsduesseoss codedesceedvecshaesedeasessens gensedecsssasessecetes 12 LOGGING IN AND LOGGING OFF BRIDGEMATES ccssssscsssssccssssccscsscccsssccccsscsccscsseesssssscescsscecsscsscesssssscesssscecsccsscesssssssesssscecsccssnees 13 TOGGINGAN BRIDGEMA TE dvodsicbdesenseeddetudessesde ate dcoeseesancaueddeesendeseuedneds ecsdnscveeeteddsedavusesteatedsves 13 LOGGING OFF BRIDGEMATE cccsesscecececeesssccecececeesssaaececececsesaaececececsesaaesecececeenssaeaecececeesensaaeceeeceesessaaececececeeeaaeaeeececeeseneaeceeeens 13 BOARD RESULTS 1s ccissesscaieessdstocscsdacact cctacansesdosccescsecesscecnanedscsteaatensoasseansaeesecntessceassssacaaseecnsecsddseuscodecuaass second dedenccesescses cevoascsuaasaseceses 14 READING FROM THE SERVER EEE SE E S EE EEE E E EEE TEE E EEE 14 RESULTS ROUND MONITOR BOARD MONITOR RESULT 14 CREATING REPORTS 14 CHANGING AND DELETING BOARD RECORDS c cccccecesssssssececececeessaaeceeececeesssaececececeeneaaaesececeesessaseceeeceesessauseeeececeessauececeeecseneneaeeeeeens 15 PROCESSING DATA IN THE SCORING PROGRAM cccccesssssssececececeesnaececececsensasececececeesesssaesecececsessaseseeecec
12. Change movement parameters for each section After the all the movement s have been finalized use F11 gt BMS to start BCS and the session 2 To setup session with one or more sections more quickly bypass the Select event rating masterpoint portion of normal setup Just select 13 No masterpoints when eTruduLwly Wane the Select event rating screen appears 13 No masterpoints Select option ESC to Exit Later after play has started use F910 oe eS nS ee Set masterpoint rating to create stratification for the game sections 9 Change scoring method 10 Set masterpoint ratinc 11 Aaainn lahanan lal OTM Change Movement after Game has started Select option ESC to Exit To the extent possible each session game should be as fully configured as possible in ACBLscore before starting BCS Movement changes can be made in ACBLscore after the BCS program has been started to accommodate the arrival of new player s or one or more no show players The ACBLscore manual more fully describes how to make changes Key F9 gt 5 Change movement parameters and ENTER or left mouse 1 Change posting method 2 Change number of played rounds 3 Change section letter and or color 4 Qualification Eligibilit 5 Change movement parame 6 Factor to a different average Settie breaking spread ters click After the new parameters have been entered and accepted ACBLscore will automatically u
13. Life Master ACBL Alpha Number file is on the Bridgemate Flash Drive There is a Life Master ACBL Alpha Number label on the bottom of each Bridgemate Non ACBL member pseudo numbers When there are regular players who are not ACBL members each non member may be assigned a pseudo number that may be used Pseudo numbers are in the ACBLscore database preceded by the character For example Player number 19 will be 19 in the database For each number that is found the database the player s name will be entered into the Player Names file If a number ACBL member or pseudo is not found or no number has been entered there will be no entry made in the file for that player The BMN command will be available whenever ACBLscore s Bridgemate Options is configured to Allow entry of player numbers at remote ACBL member numbers as well as non member pseudo numbers are read into ACBLscore and entered in the Names file The BMN command must be executed separately for each Section in a session If the Auto Strat when posting names from remote option is checked a strata will be assigned to each pair based on the players masterpoints in your ACBLscore database otherwise all names read in from Bridgemate are entered in the Names file as strata A until the STRAT command is run The F11 gt STRAT command is used to assign the correct strata to each pair Note Use the F3 command to manual
14. OK to view the Bridgemate s Table and Section settings Pre assigned Section Tables The display will show the assigned Section Table i e SECTION TABLE 3 To activate the Bridgemate and log on to the server press OK again e Manual Section Table entry The first line will show the last used Section i e SECTION If needed press or to change the Section letter Press Enter the Table number and press OK TABLE A2 will display CONFIRM gt OK If this is correct press OK The Bridgemate has now been activated and can be put into use Entering member numbers optional If you have specified in BCS that you wish to enter member numbers the Bridgemate will ask you after activation and before the start of the first round to enter the member numbers of the four players N _ and Er S W The number must be numeric and has a maximum of 12 digits Use the number keys to enter the number and confirm by pressing the OK key If a player does not know his member number or does not have a member number press OK without entering a number No number will be registered for this player Chapter 5 Use of the Bridgemate Pro scoring devices 25 Once a member number has been entered for West the numbers will be fed to the server and the Bridgemate will start the first round Information before the start of the round At the start of each new round the Bridgemate will display the new roun
15. You will be prompted to connect the Bridgemate Communications cable to a serial port use the USB to serial dongle if necessary Follow the on screen instructions e The server memory Results entered in the Bridgemate are sent to the server and stored in the server s internal memory It is essential that the server is connected to a power source batteries and or power adapter If there is no power source or in the event of power failure all data will be lost e BCS result file and log file BCS continuously reads the new results from the server and processes these into the result file This data is immediately written to the hard disk of your PC ensuring the data is safe even in the event of power failure All results shown on the BCS screen have been written to the result file BCS also has a log file containing all the relevant events All received results are written to this log file To view the log file go to the Tools gt Show log file menu The actual file BMProLog log is located in the Bridgemate Pro folder normally C Program Files Bridgemate Pro 34 Chapter 7 Tips for Use Special Note for Vista and Windows 7 Users Because of Windows security precautions use the BCS option to specify the location where the Log File is saved See Log File settings Chapter 3 for details Session file your scoring program Lastly the scoring program retrieves the results from the result file The scoring progra
16. at round info function This option can be used for team of four events Transmitting contracts The Bridgemate offers users the option of feeding information to the server immediately after the contract and or lead card have been entered This could for example be displayed on vuegraph presentations while the game is still being played If you wish to feed this information to the server check the Intermediate transmission of contract box Board order verification Check the relevant box if you would like the Bridgemate to check whether the boards are to be played in the logical order An error message will appear on the Bridgemate if the entered board number does not correspond to the logical order The logical order starts with the first board of the round and the numbers of subsequent boards should be entered in ascending order For example if boards 1 to 3 are to be played in round A the logical order is 1 2 3 Lead card If you would like to enter the lead card on the Bridgemate check this setting Member numbers If you would like to enter the member numbers on the Bridgemate check this setting By default players have the option of leaving the entry blank when entering the member number If entry of member numbers is compulsory check the Blank entry not allowed box Show contracts using Use this function to specify whether the Bridgemate displays card symbols or letters for the contracts Autopower off periods Th
17. be processed During normal use of the Bridgemate Scoring System the scoring program creates and automatically reads the result file into BCS You do not need to open the result file or read the relevant session data This is processed automatically To read other result files in BCS use the Open and Close functions in the File menu Opening existing result file Use the File gt Open menu to open an existing result file If this result file has not been opened previously on this client BCS will ask whether the client wants to log in to this result file This step is necessary to add tables to the client and interact with the result file Closing the result file Select File gt Close to close the active result file You can now open another result file 16 Chapter 3 Bridgemate Control software Using multiple clients In ordinary club sessions all scoring is done of one computer In large tournaments however it may be necessary to split the session over multiple computers each serving a selection of the tables while having the scores collected all in one Bridgemate result file BCS supports multiple clients simultaneously logging in to a single result file and storing scores during the session from multiple Bridgemate servers In order to change the program to multiple client mode go to menu Tools gt Options gt tab General and set the mode to Tournament The list of tables will now show two tabs All tables and Cli
18. card which may be captured when options are controlled by BCS Section Board NS EW Declarer Contract Result Lead A 1 2 3 N 4 H 2 H4 A 1 3 5 N 4 H 2 H4 A 1 4 7 5 1 SJ A 5 9 i H4 A ab 6 2 5 3 DA A 1 7 4 N 4 H 1 C2 Expanded detail available on Websites With the Bridgemate Scoring System more detail is available about each board than the limited information from ACBLscore The Declarer Contract and actual result when coupled with ACBLscore info provides players with more information than they have ever had The detail is even more significant with pre dealt hands using a dealing machine or the analysis of player entered boards when using BCS version 2 8 29 or later Bridgemate US has been working with three bridge specific websites that are easily set up and controlled by a non programmer Our test sites www waynesboro bridge club org www bridgewebs com waynesboro and http site pianola net wintergreen bridge Visit www bridge club org or www bridgewebs com or www pianola net to review their offerings and pricing All three offer a trial period Several clubs units have developed their own website display software Also ACBL offers a Clubs Results service to ACBL sanctioned clubs When game is finished it is very easy to upload 2 files 3 with hand records and the result is immediate More information is on our website www bridgemate us product website displays
19. either not installed or turned off all data will be lost and the Bridgemates will stop functioning BCS is able to recover the old situation Proceed as follows sure the server is reconnected to the power adapter In BCS go to menu Session gt Synchronize recover Go to the Recovery tab and press Recover server All information from the result file will now be moved to the server When recovering the server it is important that all data had been moved from the server to the result file If this is not the case information that has not been moved to the computer will be lost and the server cannot restart fully from the previous position Make sure therefore that the data retrieval is always activated during the session Procedure in the event of data loss The security of the board results entered in the Bridgemate Scoring System is given top priority As the best defense against data loss the Bridgemate system stores the results in multiple locations namely e The Bridgemate memory All results entered in the Bridgemate are sent to the server At the same time each result is also stored in the Bridgemate s internal memory These results are stored until the Bridgemate is started up again for a new session when the memory will be erased Until erased data remains stored in the internal memory of the Bridgemate even if no batteries are installed With BCS running go to Session gt Read Bridgemate locally
20. for the allowable damages that You incurred in reasonable reliance but only up to the amount You paid if any for the Hardware Device less reasonable depreciation based on actual use The above remedy is subject to the following Any repaired or replaced Hardware Device will be new or refurbished or serviceably used comparable in function and performance to the original Hardware Device and may include third party items Any Hardware Device repaired or replaced under this Limited Warranty will be warranted for the remainder of the original Warranty Period or 30 days from the date of shipment of the item back to You whichever is longer Except as otherwise required by legislation in Your jurisdiction costs associated with transport including packaging for warranty service shall be at Your expense and Bridge Systems its distributors agents affiliates and suppliers do not provide any warranties regarding any other services provided under this Limited Warranty and disclaim all duties if any of workmanlike effort or of lack of negligence regarding such services C NO OTHER WARRANTIES The express warranty stated above is the only express warranty made to You and is provided in lieu of all other express or implied warranties and conditions if any including any created by any other documentation or packaging No other warranties or conditions are made with respect to the Hardware Device or the warranty services by any person including but not
21. in this overview Erasing entry Directors have always the option of erasing entries This can either be a board result from the current round or the previous round If board results have not yet been entered in the current round the board result of the previous round will be erased This method enables you to erase all results from the Bridgemate To erase a board input insert the TD Key press 3 and press OK when prompted to confirm Erase result You will be asked to enter a board number Enter the board number and confirm with OK If that particular board can be erased the message Board erased will be displayed to indicate that the entered result has been erased If the board has not yet been played or not played at this table in the current or a previous round the TD menu will be displayed again after you have pressed OK Once a board result has been erased the correct information may be entered Note when using the ACBLscore Board results may be erased at the Bridgemate only if the result hasn t already been posted into ACBLscore Once a board has been posted into ACBLscore the correction must be made in ACBLscore Retrieving current status If you no longer know to which table and section the Bridgemate relates you can retrieve this information in the status part of the TD menu To do so insert the TD key in the Bridgemate and press 4 Press OK when prompted to confirm Status The expected table and
22. method enables multiple clubs to use the Bridgemate scoring system in the same area simultaneously with the same Section letters without causing any interference Large tournaments During large tournaments more than one server will be required to control over 128 tables The layout of the tables is important in this respect If the tables are outside the range of the server an extra server will be needed to increase the range The Bridgemate Scoring System supports multiple servers over a network In principle this network can support an unlimited number of tables The following guidelines must be observed You will need a fully operational network in which all used PCs are interconnected enabling them to access and process files Only one result file is used containing all session data and board results of all tables scoring program is running on one of the computers in the network It is not necessary for the scoring program to be running and or the result file to be stored on one of the client computers that is running BCS From an organizational point of view it may be easier to use a Separate PC containing the scoring program and result file Client PCs access the result file over the network Each Bridgemate server is connected to its own PC client where BCS is running Do not connect two servers to one client PC although technically feasible it may cause unnecessary confusion as both servers are using the same cl
23. more information please consult the manual of your scoring program The BCS screen as displayed here shows a typical mid game ae 28 condition where all Bridgemates active and game results have ig iig 5 a been entered for a number of boards 8 The name of the active result file is displayed in the bar If no result file is open the text No session active will be displayed Normally when BCS is launched from the scoring program it is quickly minimized returning to the scoring program display However if the program cannot connect to the server the BCS 5 screen remains visible to alert the user to an abnormal condition i that requires attention 0 Server information The pane in the top left hand corner of the screen displays information relating to the server If a server has been found the text connected and the version number will be displayed You can also check which serial port is being used and whether the server is running on a power adapter or batteries If the power adapter is used AC mains adapter will be displayed if batteries are used the power meter will display the number of operating hours remaining in percentages If you are using batteries we would recommend replacing them periodically rather than overusing them BCS will indicate when to replace the batteries Lastly BCS will dis
24. return to the input screen and the entered data can be deleted by pressing CANCEL again Once East or West has confirmed the score and the message Entry completed has been displayed the score cannot be edited Only tournament directors are authorized to change a score after it has been verified Please note Itis not necessary to enter the number of score points 420 50 etc in the Bridgemate The Bridgemate will calculate the score using the entered contract and result taking vulnerability into account e The Bridgemate monitors the active rounds In case of a sit out the Bridgemate will skip this round e Before starting a new round verify whether you and your opponents are seated in the correct direction to avoid playing in the wrong direction At the start of the round press OK to display the directions 28 Chapter 5 Use of the Bridgemate Pro scoring devices Posting Bridgemate Pro results Results to Bridgemate Control Software Information entered on the Bridgemates is first saved on the server The BCS program continuously reads the data from the server and stores these in the result file Posting scores in the scoring program Once the results have been saved in the result file your scoring program can read and process the scores For more information please consult the manual of your scoring program TD menu Tournament directors have far reaching powers to verify the entered results A special TD menu is a
25. section of the Bridgemate will be displayed first Press OK again to view the current round of the Bridgemate and the corresponding pairs at the table You will also see the boards to be played in this round Overview of missing results From the TD menu it is easy to establish which boards of the round have not yet been entered Press 5 and OK when prompted to confirm Missing boards The Bridgemate will now display the numbers of the boards not yet entered in this round at this table Resetting the Bridgemate The Bridgemate can be reset from the TD menu Press 10 and OK when prompted to confirm Reset It will now return to the main screen Setting contrast It is possible to set the contrast of the screen from the TD menu Press to make the screen darker to make the screen lighter Press the button several times to adjust the contrast It is also possible to adjust the contrast without using the TD Key the Bridgemate is displaying Bridgemate Pro in the main screen Please refer to the Solutions for non functioning Bridgemates laminated sheet Items 5 and 6 for procedures to follow if the screen is all black or there is no display at all 30 Chapter 6 Additional Bridgemate Functions Chapter 6 Additional Bridgemate Functions Reading results manually in Bridgemate All entered data are also saved in each Bridgemate s local memory If for whatever reason a Bridgemate is unable to feed one o
26. serial converter housing that flashes when data is being transferred through the cable If this light does not flash it may be an indication that the converter is connected to a USB port that is not configured with the appropriate drivers or the assigned COM port is 21 or higher Note BCS will only work with a COM port 1 through 20 With the USB converter connected to your computer check the Windows Device Manager for the COM port assignment Left click W F gt RUN and enter the devmgmt msc command The correct driver must be used for the ATEN USB to serial adapter Driver version 3 1 0 0 is required with the 64 bit Windows 7 and 64 bit Vista All other operating systems including 32 bit Vista and 32 bit Windows 7 will use version 2 0 2 1 Visit the Bridgemate US website for specific information 32 bit computers or 64 bit computers Do not use a USB HUB The USB to serial converter will not work reliably through a USB hub Setting the region When BCS is started with new server attached to the PC you will be asked to select the correct region Select North America To enable the server to transmit data to the Bridgemates over the correct radio frequency you must select the appropriate region The region setting in the Bridgemates is controlled by the Bridgemate firmware The Bridgemate firmware must be for the same region as selected for the server In other words the server will be unable to transmit data to the B
27. stored in the server Movements from each table are included so that the server knows per round which pairs and boards correspond with which table Now that all the relevant data has been stored in the server the Bridgemates can be activated The players activate the Bridgemates which log in to the server The results can now be entered During this process the board number and pair number direction of play are verified for accuracy Verification is executed via direct communication between the Bridgemate and the server The Bridgemate itself does not contain any movement data Entered board results are sent directly to the server This data is stored in the server memory BCS reads all newly entered results from the server and saves them in the result file The scoring program reads the data saved in the result file and stores these in its session file The results are processed and incorporated into the session data to calculate the final score Automatic launch from your scoring program If your scoring program fully supports Bridgemate BCS can execute steps 2 to 4 and read the data step 7 automatically via one simple command from the scoring program For further information on how to enable automatic launch of the Bridgemate Scoring System please contact the supplier of your scoring program Chapter 2 Hardware Configuration 9 Chapter 2 Hardware Configuration System requirements Operating system The Bridgemate
28. take several minutes For more information on using the names feature and options settings visit www bridgemate us how to quides names display names 20 Chapter 4 Server Functions Chapter 4 Server Functions Once the server is connected to the PC the BCS Server menu is active This menu contains several useful server functions It is not necessary to open a result file to use these functions Overview of tables Show tables Total numbers of tables in server 6 Use the Server gt Show tables menu to create an overview of the a fie Delete tablets tables stored in the server Log off table s Per table the green or red status light indicates whether this table Show scores has logged in to the server logged off or has not yet logged in To delete table from the server select the relevant table s and choose Delete table s The table s will be deleted from the Update settings server as will all the data of the table s To log off a table manually select the relevant table s and click Log off table s Close Click the Show scores button to create an overview of the results entered by the Bridgemate Select the table s of which you would like to see the board results and select this function When the Bridgemate settings have been modified they are updated in the Bridgemates by selecting the tables and clicking Update settings The updated settings will
29. the Bridgemate unit The signs in the casing indicate the insertion direction of the batteries Insert all four batteries in the direction indicated close the lid and press the OK button Check whether the text Bridgemate Pro appears The Bridgemate is now ready for use Exploring the Bridgemate The keyboard The Bridgemate keyboard contains 25 keys Some of the keys have a dual function Keys Explanation These keys are used to enter numbers in the Bridgemate for example board numbers pair numbers contract and result The 10 button is used to enter 0 when entering member numbers board numbers etc and to indicate 10 as the lead card 1to 9 10 These keys enable you to indicate the contract type or the card color of the lead card v NT Indicates overtricks or downtricks of the result Indicates that the contract has been exactly made Use these keys to specify Jack Queen King Ace as the lead Chapter 5 Use of the Bridgemate Pro scoring devices 23 X XX Double or redouble N S E W Declarer s direction of play PASS Indicates a pass out CANCEL Correct erase an entry and cancel commands OK Confirm an entry Switching on off The Bridgemate does not have a separate on off button To switch on the Bridgemate press the OK button It is not possible to switch off the Bridgemate manually The Bridgemate will automatically switch off after it has been id
30. the warrantor under this Limited Warranty To receive instructions for obtaining performance of this Limited Warranty You must either contact the local Bridgemate distributor serving Your country or write to Bridge Systems BV Postal Box 21570 Rotterdam 3001 AN The Netherlands visit Bridge Systems the World Wide Web at http www bridgemate com You must also 1 Submit proof of payment in the form of a bona fide dated receipt or invoice or a copy evidencing that You are the beneficiary of this Limited Warranty and that Your request for a remedy is made within the Warranty Period 2 Follow Bridge Systems shipping and other instructions if it determines that all or part of Your Hardware Device requires return To obtain the Limited Warranty performance You must take or deliver the item in either its original packaging or packaging that provides an equal degree of protection to the location specified by Bridge Systems Except as otherwise required by legislation in Your jurisdiction costs associated with transport including packaging for warranty service shall be at Your expense Failure to follow the above instructions may result in delays cause You to incur additional charges or may void Your warranty This Limited Warranty gives You specific legal rights and You may also have other rights which vary from jurisdiction to jurisdiction Where any term of this Limited Warranty is prohibited by such laws it shall be null and voi
31. to change the settings for the next session All you need to do is move the Bridgemate to the correct table Activating the server For more information on how to activate the server please see Chapter 3 Replacing batteries The Bridgemate will check the remaining battery life each time it is activated for a new session If the battery power is extremely low the Replace batteries message will appear Although it is safe to continue using the Bridgemate for several more sessions it is recommended that you replace the batteries as soon as possible The average battery life is approximately 300 sessions However this depends largely on the length of each session the time frame over which these sessions are played and how the Bridgemates are stored Entering results with the Bridgemate Who operates the Bridgemate As with the score card the Bridgemate is normally operated by North North is responsible for the correct operation East or west is responsible for verification of the entered board results Switching on off To switch on the Bridgemate press the OK button The Bridgemate will automatically switch off after it has been idle for a while i e no buttons have been pressed No data will be lost Press the OK button again to continue Activating the Bridgemate At the start of the session the Bridgemate will by default display the Bridgemate Pro main screen including the version number and language code Press
32. to which the server is also connected During big tournaments multiple servers may be required to support the high number of Bridgemates and or to establish and maintain the wireless communication between the server and the Bridgemates In this case the servers are connected to a network PC and the network consists of multiple clients Note The term client suggests that the Bridgemate Scoring System also consists of a PC network server This is not the case All network PCs running the Bridgemate Control Software are known as clients Result file The result file is created by the scoring program It contains all the session data including sections tables movements etc This data is generated by the session configured in the scoring program BCS reads this session data and feeds the correct data to the server During the session BCS reads all the board results entered in the server and saves these in the result file All Bridgemate result files have the file extension bws Scoring program The scoring program creates the session and calculates the scores After you have created a session the scoring program will create the abovementioned result file This file contains all the relevant session data The scoring program will read all board results saved in the result file and process these during the session These procedures are explained in more detail in the user manuals or help files of your scoring program 8 Procedure H
33. working into the Remote Computer s server s are configured for different channels the BCS changes need only be made at the Remote Computer s Contact Bridgemate US for more detail 36 Chapter 8 Using Bridgemaites II with ACBLscore Chapter 8 Using Bridgemates with ACBLscore ACBLscore Windows starting with version 7 45 supports the Bridgemate Scoring System BCS This chapter describes how to use ACBLscore to activate BCS and retrieve information from the result file Installation Software Required e ACBLscore Windows version v7 93 or later download from www acbl org e Bridgemate Control Software install program see website www bridgemate us or Flash Drive Install software The BCS program controls communication with the Bridgemate Pro hardware and exchanging data with ACBLscore through the result file The default installation folder is C Program Files Bridgemate Pro If BCS is installed in another folder you will need to identify the different installation folder to ACBLscore e BCSsetup exe installs the BCS software It is recommended you accept the default installation folder Special Note for Vista and Windows 7 Users Because of Windows security precautions use the BCS option to specify a non Program Files folder where the Log File should be saved See Log file settings on Page 19 Chapter 3 for specific details Install ACBLscore Version 7 93 or later Note Normally BCS and ACBLsc
34. AEE aeaa 18 CLOSING ROUNDS aes ac EEE EE EE S EESE SEEE ES ESEA EEE seb okie essa Sup E EE E EOE 18 PROGRAM SETTINGS OPTIONS sssssisoscsssssssnscsiescessscusnessacssensisnseesvonssescusessesenscestessbasseesescosesesocssuasedeectvonscednessbandesnnssodecsboceseeseseedess 19 CHAPTER 42 SERVER FUNCTIONS ceii cai ccsssesscsissstsotcesessbsddessenssenss cosdssdecdinsessdossdeatssssussbabdsseueseivtesbcesavesdenstsesscv dssdecdssvess suas 20 OVERVIEW OF TABLES sini sciscsesesssonassctecsssessnssesestcenssonsnsssssesecsasendaseecesdeecesensvonnscnedssdestvonassnaeessensssosessevevensonsadessasdesessendasessessessasenseens 20 OVERVIEW OF ENTERED RESULTS ssiscssscecosssavesnecssonsonssssesacseosssendnsensesseasesensssnnsesbnssstncseonassoansnssnesuaseientesensonsndscsacseenasen esessesseasasentsons 20 RESTARTING BRIDGEMATE NETWORK sscsssssesssxessossessesssnsdsnsesseusassscsvensssdendsdecssvensssbescevecsenenssectssnssosnessondevsn ssoavesscstensasesssdenseesencevss 20 RESETTING THE SERVER 6 sssvcisssccciacsseessssad sutssesuasdeastesusasseussseassussSesesvens sceudevenssceuadoseusesensduuassscuesubsssdueddues dsudesusueedesseesabessevenss 20 SETTING THE REGION s ssesiss desseasessacantscosstacbanccsnssctsbsezsaubsnusacbebsocsensssesscassbapsobsseasbceastetsedssuces cosh sepsaddcnesd cual sensebsveeadseissebantacbecicbsseazensad 21 SETTING THE CHANNELisisssssssssccssssssusscoassssensecvonsduassessteasnesscbassoasevascssssnsseotssbadseaces
35. B FCC ID UVIBM11R11B Serial Server Model BS10R11B FCC ID UVIBS10R11B Conforms to the following regulations FCC part 15 subpart B section 15 47 This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures e or relocate the receiving antenna e Increase the separation between the equipment and receiver e Connect the equipment into an outlet on a circuit different from that to which the receiver is connected e Consult the dealer or an experienced radio TV technician for help This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 This device may not cause harmful interference and 2 This device must accept any interference received including interferenc
36. Bridgemate Pro main screen after a few seconds The Bridgemate has completed its tasks and can now be safely stored away Special entries Pass out and board not played If the players have passed four times without making a bid enter Pass at CONTR and confirm with OK You will not be asked for the lead card and the result the Bridgemate will switch immediately to the verification screen If a board has not been played in a particular round e g due to time constraints the Bridgemate must be informed If this step is skipped the Bridgemate will remain in the uncompleted round and other pairs will be prevented from entering their results To enter an unplayed board press the 10 key in the CONTR row The screen will now display the text PLAY Confirm by pressing OK The Bridgemate will now display the verification screen again The Bridgemate will not display an overview for unplayed boards As it is possible to play the board in a later round players must be prevented from seeing the results of previous boards The board can be played afterwards without the Bridgemate in that case the relevant score is entered manually in the scoring program Rectifying an input error If you have made an input error press CANCEL to rectify the error You can to return to the board number input screen by repeatedly pressing this button It is also possible for East or West to reject the entered data by pressing CANCEL The Bridgemate will now
37. If so configure each User s BCS options to use the same Other folder BMPlayerDB mdb database file BMPro exe program folder Similarly the special BMPlayerDB mdb player name lookup file for the National TRN folgar Tournament or large local database will be located in the hidden User Appdata Other folder folder ___Select folder__ When there are multiple Windows Users expecting to use the special BMPlayerDB mdb lookup file special arrangements are required Options General Scoring Program and Player Database General View File locations Scoring program Scoring program specific options ACBL affiliated Clubs Units should select ACBLscore as the scoring program scoring program in use a use also check the Load player database after BMS command This works well when your local Club mode database is not too large i e perhaps no l more than 10 to 15 000 names SSA Load player database after BMS command Should your ACBLscore program and player database be located in a drive other than the root directory click on Change location so that BCS ioe esti find the database file when it is started from ACBLscore Tournament player names To use ACBL s very large Tournament or a large local database click Loadtoumament database Load tournament database to load update the special BMPlayerDB mdb file This action will
38. K E W should approve the No play result When the result is posted into ACBLscore it is treated as a Late play This must be resolved within ACBLscore before the end of the game If it is a true late play the actual score be entered after the board is played If the players actually passed out the board but incorrectly entered in to the Bridgemate you can enter 0 for the score in ACBLscore alternative may be to give the players an ACBLscore no play NP This will then for this board give each pair their average of all the other boards they have played A fourth alternative might to be assign arbitral scores 40 Chapter 8 Using Bridgemates II with ACBLscore e When posting results in a multi section session you will see Select score posting option 1 Post all sections configured for remote entry 2 Post only Section x Ca Section C If you wish to post only scores for the active session click on 2 Post only Section C and click OK Foteacione 2 Fotevenel press 2 and press Enter or CLUB mode use the arrow keys to highlight the line and press ENTER 2 5 F3 Names F4 Leaders F5 Recap F Change Fa List F9 Set sant Otherwise just press ENTER to post scores for all sections e The ACBLscore screen displays the number of rounds whose scores have all been posted After all of the rounds being played are show
39. Language code Autopower off period Contrast value Current status us 20 seconds 3 Bridgemate Pro main screen 2 During a game the rankings may be continuously displayed The display will start after a few seconds it opens your browser Internet Explorer Firefox etc As each new score is received the display will automatically update to show the latest rankings Server Tools Help Edit movement Synchronize recover Update movement Close rounds Upload hand records Run Bridgemate Pro concurrently Report Session Bridgemate Control Software Report Session Enable Live Ranking Show number of boards Show percentages Chapter7 Tips for use 33 Chapter 7 Tips for use Replacing Bridgemate If for whatever reason you need to replace a Bridgemate during a session and you are unable to log off the Bridgemate using the Reset TD menu option proceed as follows In BCS go to Server gt Show tables Select the relevant table and press Log off table s The Bridgemate will now be logged off from the server another Bridgemate and use the TD key to set this Bridgemate to the correct section and table number Also make sure to set the correct channel Activate this Bridgemate The Bridgemate will take over the position of the old Bridgemate Recovering the server If the server is disconnected from the power supply and batteries were
40. Scoring System needs Windows XP SP3 or higher Hardware Recommended configuration Processor Pentium III 600MHz or higher Memory 256MB or higher The PC must also be equipped with a serial port If your PC does not have a serial port use the USB to serial converter dongle to create an extra serial port on the PC Installing Bridgemate Control Software BCS To install the Bridgemate Scoring System run the current BCSsetup exe file This software is on the Flash Drive Memory Stick from Bridgemate US also it may be downloaded from Bridgemate US s website www BCSsetup3 1 2 exe The requirements for installing BCS software may differ depending on your scoring program For more information about where to install the software on your PC please consult the information supplied with your scoring program To install BCS on a separate client we recommend the default folder C Program Files Bridgemate Pro or C Program Files x86 Bridgemate Pro Special Note for Vista Windows 7 or 8 PC s Since Windows 7 8 and Vista security precautions inhibit writing to the BCS Log file to the C Program Files folder or the root previous instructions were to configure BCS to save the Bridgemate Log File elsewhere e g C ACBLSCOR Starting with version 3 1 2 the default location for the Log file is the User Appdata folder therefore new 3 1 2 installations need not change the Log files defaul location See Log file sett
41. TD menu Press 1 and confirm OK button Arbitral score Next enter the arbitral score for each pair NS _ EW You can choose between 40 average minus 50 average and 60 average plus Press 4 or to enter 40 5 or to enter 50 6 or to enter 60 It is not possible to enter a value other than these percentages Press OK after you have entered the percentage Do this for both pairs The screen will now return to the TD MENU Remove the TD key The assigned arbitral score is now displayed at CONTR Press OK to confirm this and confirm the verification screen The Bridgemate has now saved an arbitral score for this board and will feed this to the scoring program during read out Chapter 5 Use of the Bridgemate Pro scoring devices 29 Retrieving overview To obtain a board overview without reading the data or completing a board input it is possible to use the special overview function of the TD menu To access this overview insert the TD key and press 2 You will be asked to enter the corresponding board number The overview displays the declarer pair number declarer position e g N S E W contract and result The number of score points is not displayed in this overview If the screen returns to the TD menu after the board number has been entered no results have been registered for this board at this table Note that results that have been entered on the same board but in other Bridgemates will not be shown
42. YING SIMULTANEOUSLY csssssssssssssssesssscnscsssscscnscsesscscnscsssssscnecsesssscnscsssssscnscssssascnsssssssscnssssssssooes 34 LARGE TOURNAMENT Syaseistscsssscectesssansocsascendsosccesnsceicesesestsodnessdactevenisnsessonssenesiucssssadecenessbassesesssedesesscssvasedestcsesscndnassbendevabicndaessoesvene 35 USING ACBLSCORE AND BRIDGEMATES ON A NETWORK scssssssssscssscssssssssccesecsssccscnscsssscscnscsssssscnscsssssscnscssssescnsssesssscnssssssssones 35 CHAPTER 8 USING BRIDGEMATES WITH ACBLSCORE ssccssssssssscosscssssscnsssssssccssssssscssnscssssscnsssssssssossssnsscosses 36 INSTALLATION ssndscenssssecessssesensseteissasteonassodsdeevessessestetesensonteseesassvenssenbesensteduasesesdsseeseesetesdessconassedesevsnstubsasscdesedsossntesbacdesensendasessessses 36 SOFTWARE REQUIRED a a cascoess susan eleudcapvadeeartaleceveseaeneads 36 INSTALT SOPT WARE a dusedyejee co uencuedaverdeccavenduodusspelued Wea steseedeaseaesetuedes 36 CONNECT THE BRIDGEMATE SERVER TO THE COMPUTER sssssssscsececsessaececececsessaaecesececseseaeeeeeeeceesessaaeceeeeeesessaaeseceesceeseaaeeeeeeeeeenes 36 BCS SETUP 6 cab ea ee ge Ge in ooo ego Hee lea seeded tebe 36 A CBLSCORE SETUP bilge abana OE 37 READ DATA FROM THE BRIDGEMATE SCORING SYSTEM INTO ACBLSCORE ssccsssssscssssccccsssccscssscccssssccccssccececssscccssseccsessssees 39 PLAYER NUMBERS
43. ake with OK e press OK to go to Section Table screen use to select Section assigned to the table e press OK to put cursor on the Table line Now when players start each Bridgemate they will only need to enter the table Special Reports Play data may be copied from BCS and used to prepare special reports such as a summary of the results of each board played e See Creating Reports Chapter 3 page 14 on how to copy play data from the BCS screen e EXCEL spreadsheet Convert Text to Table o Paste the copied data into an Excel Spreadsheet o With the new data highlighted select Data gt Text to Columns Select as the delimiter e WORD documert Paste the copied data into Word document o Highlight the new data select Table gt Convert gt Text to Table Complete the Convert Text to Table screen as noted for Table size Number of columns Number of rows AutoFit behavior Commas AutoFit to contents and number of columns in your case ip AutoFormat data 7 is shown here Separate text at o The table that is created will be highlighted Select Table gt O Paragraphs Commas Convert gt Table to Text This creates text which may be pasted O Tabs Oother into an email message or uploaded to a website e OpenOffice org A simpler procedure is to use the spreadsheet program of OpenOffice org which is free to download use and distribute at http
44. ardware Configuration e With batteries installed but also when powered by power adapter the server is always actively waiting to receive a radio signal from a Bridgemate even if the client PC is not running BCS If a battery is not removed and the server is running on batteries only the battery set will drain in aproximately 50 hours e When removing batteries from the Bridgemate scoring device or server do not use your fingers or finger nails to remove the batteries use a blunt object like a screwdriver or pen to safely remove the batteries When both the power adapter and batteries are used the server will obtain its power from the adapter The batteries will only be activated if the adapter is not supplying power e g during a power cut Power will immediately transfer to the batteries and no data will be lost We recommend installing batteries as a back up while the server is in operation This will ensure no data is lost during the session Switching off The server will automatically switch on once the power adapter is connected or the batteries are installed To switch off the server both power sources will need to be removed It is recommended the power adapter and batteries be removed after you have finished using the server Only one of the four batteries needs to be removed To remove the batteries please use a screwdriver or pen do not attempt to remove them with your fingers Warning Do not reinstall the removed ba
45. ast searches for specific boards or to compare results using Section Table Round Board Pair NS and Pair EW filter sort options Logging in and logging off Bridgemates Logging in Bridgemate Once the corresponding tables have been added to the server Bridgemates can be activated Once the Bridgemate has been switched on the start up screen will display the text Bridgemate Pro followed by the version number Press OK to go to the section and table number screen Press OK again to log the Bridgemate to the server The flashing symbol in the top right hand corner of the Bridgemate screen indicates that radio communication is taking place Once the Bridgemate has logged in all first round data will be displayed The red symbol in the Status column of the table list will turn to green This column also gives a clear overview of all inactive Bridgemates if the status column is still red the table has not activated its Bridgemate In the following cases the Bridgemate will not be logged in to the server but instead the message SYSTEM NOT ACTIVATED YET will be displayed and the Bridgemate is returned to the start up screen Bridgemate Scoring system has not been started yet by the scoring program corresponding table has not been added to the server session of this table has finished all the results have been registered for this table In this case the Bridgemate will display the message End of s
46. at lead cards must be entered the Bridgemate will ask you to enter the lead card LEAD RESULT Select the lead card using keys 2 to 9 10 J Q K or A and the card type using amp v or 4 You are free to decide in which order to enter the card and the card suit Press OK to confirm the lead card Entering the result Once you have finished playing the board you can enter the result Using American Style when the contract has been made enter the number of tricks taken If the contract was not made use the key followed by the number of tricks down The key may also be used when the contract has been exactly made Depending on the settings in BCS the result can also be entered as the total number of tricks won 1 0 to 13 Up down tricks When using Up down enter key when contract has been exactly made the key followed by the number of overtricks or the key followed by the number of tricks down Verification by East or West Once you have entered the contract the lead card if requested and the result press OK Verification by East or West will display The Bridgemate must now be passed to East or West to verify the entered data The verification screen will for example be displayed as follows Board 13 3NTx 1 Board 13 3NTx 4 by East 950 by East 950 The board data entered by North is displayed on one total screen the lead card will not be displayed In additi
47. ate to check whether the entered board number corresponds to the logical order If the Bridgemate expects a different board number to be entered the following message will appear BOARD OUT OF ORDER ACCEPT Press CANCEL to return to the previous screen and press CANCEL again to erase the board number and to enter a new board number If you do wish to play an out of sequence board press OK The board number will be accepted and the Bridgemate will assume that you have chosen to deviate from the logical order Once the board number has been entered and confirmed the cursor will jump to the second line You can now begin bidding As soon as the contract has been determined enter the contract and the direction of the declarer To enter the contract use numbers 1 to 7 and the v a and NT keys If required you can also use the and XX keys to indicate double or redouble To specify the declarer use the N S and keys If the declarer is North press N S once If the declarer is South press this key twice Alternatively if the declarer is East or West press E W once or twice The screen is displayed as follows BOARD 13 CONTR 3NT x E_ Press OK to confirm this If the OK key is pressed before the Declarer has been entered the display will read ENTER DECLARER N S or E W 26 Chapter 5 Use of the Bridgemate Pro scoring devices Entering lead card optional If you have specified in BCS th
48. aving examined the individual components of the Bridgemate Scoring System the next step involves assessing the Chapter 1 Description Bridgemate Pro scoring system entire process and how the different components relate to each other The process is outlined in the below diagram Activity Step 1 Session created in the scoring program Step 2 Result file created by the scoring program Step 3 Bridgemate Control Software reads the result file Step 4 Bridgemate Control Software transfers data to the server Step 5 The server has been activated and the Bridgemates can be activated Step 6 Results are entered in the Bridgemate and sent to the server Step 7 Bridgemate Control Software retrieves the data from the server The information is saved in the result file Step 8 The scoring program reads the results saved in the result file and adds these to the session Explanation This is the starting point in the process In the session users can set the number of sections to be played the number of pairs per section boards and movements Using the session data the scoring program creates a result file containing all data relating to the sections corresponding movements boards and pairs The scoring program starts BCS The result file is then read by BCS generating the data for all tables used in each session BCS initializes the server using the data contained in the result file All session tables are
49. become active in each Bridgemate when it is reset and logs in again the Bridgemate will return to the position where is was before the reset and will now use the new settings Click the Retrieve scores button to move all entered results for the selected tables to the result file Overview of entered results The Server gt Show all scores menu function displays an overview of all board results entered in the server Depending on the number of tables stored in the server there may be a delay in reading and displaying the data ate Control Softwe Restarting Bridgemate network Tools ia Show tables The wireless network can be restarted from the server using the function Server gt Restart Show all scores network Use this function to solve wireless communication problems between multiple Bridgemates and the server This may be done at any time it does not interrupt anything Restart network Ers y Reset Region selection Channel selection Resetting the server The Server gt Resef menu function resets the entire server and deletes all entered data To avoid accidental resets you will be asked to enter a verification number which is displayed on the screen Note If the server is not connected to the power adapter and or is not fitted with batteries all data will be lost It is therefore not necessary to reset the server before disconnecting it from the power source or after connecting it to the power sourc
50. ce at the start of a session As the session progresses the percentage will approximate the actual end percentage on the board 3NTx 1 when showing 3NTx 950 33 North South results 950 5 when showing 67 declarer results I The percentage relates to the achieved number of score points Depending on the BCS setting this always applies to the North South pair and or the declarer Press OK to exit this screen Chapter 5 Use of the Bridgemate Pro scoring devices 27 If you have set BCS to also display the scores of other pairs on the entered board the Bridgemate will display these results This screen is displayed as follows S 28S 2 110 3NTx 4 950 The scores are sorted from high to low on the basis of the achieved score points of North South The score achieved by the table viewing the results is displayed with optional The scores are displayed in pairs If there are multiple board results press OK to view the next results It is possible to set BCS to view the scores again after they have all been displayed End of round At the end of the round the Bridgemate will display the message End of round You do not need to do anything The Bridgemate will automatically switch off after a few seconds Press OK again to begin entering the results in the next round End of session At the end of the last round the Bridgemate will display the message End of session and return to the
51. cked these tables will not be removed 18 Chapter 3 Bridgemate Control software Synchronizing client to server and vice versa As outlined above the main function of the synchronization process is to synchronize the client to the server and vice versa The default settings of this function are configured to synchronize the client to the server tables that have been assigned to the server but not to the client are added to the client and tables that have been assigned to the client but not to the server are removed from the client These settings will need to be adjusted when synchronizing the server to the client In this case delete all tables from the server that have been assigned to the server but not to the client select Delete from server Conversely add to the server all tables that have been assigned to the client but not to the server select Add to server In all these cases make sure the Delete tables from server which are not in session option is checked to delete all tables that have been assigned to the server but not the result file and therefore not to the session Should it transpire that these tables were correctly stored in the server and not in the result file a new result file will need to be created or the current file updated Recovering the server The Synchronize menu function also offers users the opportunity to fully synchronize the result file and the server To do this go to the Reco
52. creen Left click on BMO Remote Options or highlight the line and press ENTER oe feeen at Typical club game options shown here Remote Options 5 player must enter a player Auto Strat when posting names from remote Show previous results of the board just played 070904 A or AIH for Command list Add section Maximum results to show 0 127 0 unlimited 0 ees Show your own result the list of previous results WECORE Version W749 08 13 2007 1897 2007 ACBL Enable the possibility to repeat the results 2 Show percentage on the board just played On Show score from perspective of declarer Off N S Show pair numbers in the round info screen Verify the board number on correct order of entry On North American results entry method Off European Show contract as letters Off symbols Remote auto power off time 5 60 20 Verification message display time 1 7 1 Press F9 when done OK Set up a Game Press ENTER for No Select posting method 1 With the BCS program already in T Pic e stalled create the game file and set 2 Pick ups Sequence by N S pair number 3 Travelers Sequence N S pair number up sections in the normal manner Use Remote Server for score entry No Cancel Special considerations are Pick ups must be Sequ
53. d but the remainder of the Limited Warranty shall remain in full force and effect if its allocation of risks is not materially disturbed Safety Instructions 3 Safety Instructions Important safety warning Failure to properly set up use and care for the Bridgemate system can increase the risk of serious injury or death or damage to the system Read this manual and the manuals of any peripherals for important safety and health information Keep all manuals for future reference For replacement manuals go to www bridgemate us media downloads om pro manual pdf or contact Bridgemate US Select a safe location for the Bridgemate server and scoring devices If the Bridgemate Pro server or Bridgemate Pro scoring devices falls and hits someone it could cause serious injury To reduce the risk of such injuries and damage to parts of the system set them up according to these instructions and place them on a surface that Is flat and level Is stable and not likely to tip over Allows all four feet of both the server and scoring device to be in contact with the surface Is not likely to allow the server and scoring device to slip or slide off Is clean and free of dust and debris If the surface or feet of server or scoring devices become dirty or dusty clean them with a dry cloth Arrange all cables and cords so that people and pets are not likely to trip over or accidentally pull on them as they move around or walk through the area Whe
54. d and the expected pairs as well as the direction of play The board numbers will also be displayed For example you can verify at the start of the round whether you are seated in the correct direction and have the correct boards on the table This information is displayed as follows ROUND 1 1 4 NS 1 EW 2 Press OK to confirm this screen and continue with the board input Entering board results The following screen will be displayed when entering the board results BOARD _ CONTR The flashing line indicates the input position Before starting the game enter the board number and press OK to confirm The Bridgemate will verify the number An error message will be displayed if the board number does not appear in that round BOARD NUMBER INCORRECT R1 R1 indicates that the Bridgemate is in round 1 The message will disappear after a few seconds or you may press CANCEL You will now be asked to enter the correct board number If the board is entered a second time within the same round the following message will be displayed BOARD ALREADY PLAYED It is not possible to enter a board twice in the same round If the board result has been entered incorrectly and requires correction call the director If supported by your scoring program the director may delete the board result using the TD key and the correct score may be entered Use the Bridgemate settings to indicate whether you would like the Bridgem
55. e Chapter 4 Server Functions 21 Setting the region The Bridgemate Scoring System communicates over a Region selection predetermined frequency spectrum The permitted Regional settings frequencies differ per continent Three continents are Curent region currently supported Europe North America and Australia Nohama New Zealand When first launching BCS with a new era server attached you will be asked to select your region a 5 The server will select the corresponding frequency spectrum to communicate with the Bridgemates Remember to use the correct Bridgemate firmware for your region For North America the firmware version with country code US is used This country code is displayed on the start up screen of the Bridgemate If you want to change the regional settings of the server go to Server gt Region selection The Current region function displays the current region Select the new region and press Set The new region has now been set Remember however that Bridgemates must have firmware for the region selected Setting the channel The server and the Bridgemates must be set to the same channel to communicate with each other To set the channel on the server use the Server gt Channel selection menu Channel selection Channel settings Current channel 0 New channel Oo v Set The Current channel function displays the current channel Select the new channel and press
56. e Client column of the All tables tab The Client tables tab only displays those tables assigned to the current client Removing tables from the client Click on the Client tables tab for an overview of all the tables added to this client Right click on the table you would like to remove and select Remove from client The table will now be removed from the client Chapter 3 Bridgemate Control software 17 Server control Activating the server To activate the server connect it to the client PC and connect the power adapter or fit batteries Once the server has been found specific data will be displayed in the top left hand corner of the BCS screen and the Server menu will be activated You are advised to connect the server before launching BCS Resetting the server The server contains no data when initially connected to a power source New tables can be added instantly If the server contains data which you would like to delete you will need to empty the server This is done using the reset function Go to Server gt Reset You will be asked to enter a verification number which is displayed on the screen This verification number ensures that the server cannot accidentally be reset Once the correct verification number has been entered the server is emptied and all data removed Adding tables The server is activated by adding tables As soon as a table has been added the server feeds this data to the corresponding Bridgemate wh
57. e Bridgemate will automatically go into autopower off mode if it remains idle for a while The default setting is 20 seconds To change this setting enter a value between 5 and 60 seconds in Autopower off period In Verification message enter the length of time you would like the message Verification by East or West to be displayed Update settings during play Option settings are sent to the Bridgemates when a new session is started and Bridgemates log to the server It is also possible to modify the Bridgemate settings during play and have the Bridgemates use these new settings To update the Bridgemate settings after the Bridgemates have already started the session do the following Update the Bridgemate settings through the Bridgemate tab in BCS Tools gt Options or in ACBLscore Go to menu Server gt Show Tables Select the tables you wish to update the settings for Note CTRL A will select all the tables at once Press the Update settings button Go to each Bridgemate Pro that is to have the new options settings Use the TD Menu 0 to reset the unit The new settings will take effect when the Bridgemate logs on again LOOT CoN System functions The Bridgemate has two separate system functions In both cases the Bridgemate communication cable must be connected to the PC Changing Firmware The Bridgemate is controlled by a piece of software in the internal memory This software can be changed f
58. e Bridgemates per section and table This chapter also explains how to set the radio channels to enable wireless data exchange Chapter 3 explores the use of the Bridgemate Control Software in more detail Chapter 4 explains the different Bridgemate Control Software options offered by the Bridgemate II server Use of the Bridgemate II scoring devices is explained in Chapter 5 Chapter 6 highlights the additional functions for the Bridgemate Chapter 7 contains tips on how to operate the Bridgemate scoring system when multiple bridge clubs are playing simultaneously in one room Practical advice is also offered on how to deploy Bridgemate II in big tournaments involving different rooms and or multiple servers e Chapter 8 describes using the Bridgemate system with ACBLscore Version numbers This manual covers the following versions of the Bridgemate Pro components Bridgemate Control Software 3 1 2 BCSsetup3 1 2 exe Bridgemate Pro serial server 1 2 6 firmware version serv126 exe Bridgemate Pro scoring devices 2 3 2a firmware version US232a bpf Bridgemate RF Protocol 1 3 firmware version rfmodem13 bpf Download Software and Firmware Bridgemate software and firmware as well as installation instructions may be downloaded from www bridgemate us Notes Bridgemate Control Software BCS 3 1 2 is compatible with Windows 10 Windows NET framework 4 0 or later is required to install v3 1 2 If Windows NET framework software is requi
59. e displayed in the right hand side of the screen For each hand board played the table s pair numbers declarer contract tricks made or set and the exact time the board result was saved in the result file are displayed BCS logs the time date when the server was read and the board result was saved in the result file The system does not log the time date when the hand was actually registered in the server Chapter 3 Bridgemate Control software 13 Board monitor and round monitor To provide the director with up to date information on the progress of the session a round and a board monitor are available The round monitor shows how many scores have been recorded for each table in each round The board monitor shows how many scores have been recorded at each board for each table Both monitors are updated in realtime when new results come in Result matrix The result matrix shows the results conveniently arranged A quick glance tells you which scores are recorded per board or table The matrix has different viewing orientations which can be controlled from the Options menu Players This tab shows the member numbers as they are entered on the Bridgemates and the names of the players as found in the local database loaded from ACBLscore initially or tournament database pre loaded in BCS options Filtering and sorting board results The multi criteria filtering and sorting functions are in the bottom right hand of the screen This enables f
60. e that may cause undesired operation Caution Any changes or modifications not expressly approved by Bridge Systems BV could void the user s authority to operate the equipment Canada Regulatory Compliance Statement This device complies with Industry Canada Standard RSS 210 Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference including interference that may cause undesired operation of the device Ce dispositif est conforme avec la norme CNR 210 d Industrie Canada Le fonctionnement du dispositif est sujet aux deux conditions suivantes 1 le dispositif ne doit pas causer de brouillage et 2 le dispositif doit accepter tous brouillages incluant tous brouillages Table Terminal IC 6946A BM11R11B Server IC 6946A BS10R11B July 2015
61. eable e If results had already been entered using the old Bridgemate use Server gt Read scores to see if the server has the results already entered if so no further action is needed However if some or all of the already entered results were deleted use Session gt Synchronize Recover gt Recovery gt Recover Server to update the server with the results already recorded in the result file CAUTION When there is a Recovery it is possible that results entered at other tables at about the same time may be lost and need to be re entered If the replacement Bridgemate displays SYSTEM NOT ACTIVATED YET screen it may be necessary to recover the server as described above 42 Chapter 8 Using Bridgemates II with ACBLscore Swiss Teams and Knockouts ACBLscore does not support using the Bridgemate wireless scoring system for team events There is a third party software that may be used for team games The final results are then entered manually into ACBLscore Detailed information is available on the Bridgemate US website Team Games using Bridgemates Procedures when using Player entry of Section Table Check each Bridgemate as it is placed on a table Press the OK key if the Bridgemate Pro screen appears the unit is ready for Section Table input If the display is anything other than Bridgemate Pro reset the Bridgemate For multi section games the suggested procedure when placing Bridgemates Pro on tables is to e w
62. ence by table number Click Yes or use cursor key to highlight Yes and press ENTER for Use Remote Server for score entry 2 ACBLscore automatically interrupts posting as of the penultimate next to last round to accommodate preparing a one round to go report After all results for the next to the last round have been posted one or more additional ACBLscore post commands will be needed to complete a game 3 set up anew game especially with multiple sections in ACBLscore more quickly you may bypass event rating See Quick Setup Tip on page 40 BMP Post scores from Remote choy BMS Start Remote server reset server beginning of session 4 When all Sections are set up start BCS software BMR Restart Remote server do NOT reset server BML Locate Remote server The Bridgemate commands are at the end bottom BMN Post names from Remote of the F11 commands or key to go to the last entry BMO Remote Options 3 in order to see all the commands Cancel Help 5 The BMO command is used to set Bridgemate options when BCS software is configured to use options settings specified by the Scoring Program 6 The BMS command is only used to start a new game session This will RESET the BCS software server and Bridgemates erasing any existing settings 7 The BMR command is used to restart BCS without losing data already entered This may happen when the PC has been stopped
63. ent tables The All tables tab contains all the tables stored in the result file These are generally all the tables used in the session The Client tables tab displays the tables assigned to the client PC you are currently using The name of this client is displayed in the bottom left hand corner of the screen The tables must be assigned to a client If you are using one PC for your sessions all tables will be assigned to the same client In this case the All tables and Client tables tabs contain the same tables If you are using multiple clients the All tables tab contains all tables in the session the tables may be assigned to different clients The Client tables tab only displays on both PCs those tables assigned to that specific client The scoring program will create the result file for you By default it is assumed that only one client is used The program will automatically assign all tables to the PC you are currently using You do not need to perform any manual changes Manual changes are only required during big tournaments involving the use of multiple clients and servers Adding a client to the result file The result file keeps track of which clients are using the result file Your scoring program will automatically add your client to the result file If the result file has not previously been opened by the client PC it was created on another PC this client has not yet logged in to and cannot use the result file To add a new c
64. epeat the process If the problem persists replace the Bridgemate batteries WARNING Only use this option as instructed Incorrect use may result in faulty operation Only use those files supplied by Bridgemate US and follow the instructions carefully We strongly advise against any other use Bridgemate analysis The Tools gt Bridgemate gt Bridgemate Pro analysis menu displays relevant information about the Bridgemate including version numbers autopower off time and or correct operation of the Bridgemate When the 1 screen is displayed connect the Bridgemate Communications cable to the serial port and click OK on the screen Report Bridgemate analysis report When the 2 screen appears connect the mini plug to the jack on the back of the Bridgemate press OK on the Bridgemate and then click OK on the screen Hardware version communication cable 1 4 The screen to the right shows a normal Bridgemate Bridgemate functionality check that is deactivated it is in sleep mode Hardware version 1 2 ad Firmware version 2 3 2 Note When the 2 screen appears you may first Edition Extended version type Channel 0 press on the Bridgemate wake it up connect the mini plug and then click OK on the screen Using this scenario the Current status will display Bridgemate Pro main screen There are other descriptions for other Bridgemate conditions Real time Publication
65. eses 30 READING RESULTS MANUALLY IN BRIDGEMATE scsssssssscssssscssscssscsssscssnsssssscssnscsesssscnsssssssscecssssascnascsssascnacessssscnsssssssscssssssescoes 30 SETTINGS scscssscsascsesescnasssesesstesescecscvsusecdesesssssseatcoadesedes saassbenecsnascnsnesdesasveaticuanasesessvaseseocsenesessteceeecsensbesadeseasestastoeesvenes 30 UPDATE SETTINGS DURING PLAY scisostssescsscessiconsensssecdeseasessntbenateseacs scoastecesdenesdestasdeecsvent cnados ones seesesvecdesasenetecbieecsensevsadeseacestasebenctenes 31 SYSTEM FUNCTIONS isoiseccacessecsessdvssdecgasextbesseasescocsevaseecdesessecteetscnadentees soassvedecenescsctasteessveesscaasaseoestvaseseecsenesonstecbieecosnsbesadeseacestaseoeecvened 31 CHAPTER 7 TIPS FOR USEivsicii siccssssstsscccssctasssnssvesteseccisscsscbecsooscdansssseteedeessosnsetectstesasdbesssnbessecscoonssvonssbiseesocbiessascvecseosossenssoones 33 REPLACING scsscvcesaceccsastsvasavaaseecesesvassaceassetsvaseesanessvacedeassosass seatoabecssascoeanecdestes sous deaseesandensasacnashosesesusesessaseaseveasaosacsanse 33 RECOVERING THE SERVER ssisscctscsesasacsscasceaceecesccossesceas soncsvscadcasessvostsuassesocsseodoabecssonaceaneedasacssous ceaseasaneevesanseassesasdsusesausasaee vassesaceanss 33 PROCEDURE IN THE EVENT OF DATA LOSS isasisossssesssssscesenssannscsacssonsisnsessccnssesctiecsesesesbssssbansesssscndecesscsseasedendcsnssesnessbandesnnisndaessoeeseee 33 MULTIPLE BRIDGE CLUBS PLA
66. essesseesseasconsesbsesesseuscoasseteabesuessdesssessavecessaassoonseses 21 SYSTEM FUNCTIONS ssssessicvedscoasssssasnsscosbsssassecccdsceaseessesgenesscnasseassbecuesbscsoscnssvaseestasdeseassnesvensevusessensdvoascoassessevedesecvssdaseercees ansesepsssas 21 PROGRAM SHUTDOWN POWER OUTAGES CHANGE PC csscsssssssssssnscssssssnscssscsssnesssssssenscsssssssnsssssssscnsssssssscnesssssascnssssssesones 21 CHAPTER 5 USE OF THE BRIDGEMATE PRO SCORING DEVICES sssssssssssssssssssssssssssssssssssssssssssssssssssssesssssess 22 EXPLORING THE BRIDGEMA TE cssssioossccccesdaessvecehebacdesssvssussneesedoasessbassnenssdeatenssnsaiesdouedsessssnsscScdssuoasevoassbssdesesedvenchseesdeasesteessiencstecssoas 22 ACTIVATING THE BRIDGEMA TR issccissesicecciescesssesshotsctetseusssebecdesssesonsshetesdessseacessendseusdecesesedtencedsseeassooessdecdeseseisesssebcsdeasesseessgecsedecsseas 23 ENTERING RESULTS WITH THE BRIDGEMATE wiicscciseisssonsshcssccoassessnsssoncsdessebasessassdeuessesssonsseocdssasasseoagsbacdesasessessbencsdeasesieessgecsedeasseas 24 READING BRIDGEMATE RESULTS sccccsssissisosseoncssesseasesvscsosssoseasescessaseaisesssveeseseseessesbecaooesesesdssoeesssbistesssesenssseecssesieaioovseodssseseees 28 ESEO S ET T suas eseuedeiscanesstonsstesasoncs suesessces smsnesctossauasees ES TOE TORS 28 CHAPTER 6 ADDITIONAL BRIDGEMATE FUNCT ION G ccsssscssscssssscssscssssscssscesssssssscsssassssscsssacsssssssassssscssascs
67. ession Another Bridgemate with the same section table number setting has already logged in to the server o Check the BCS screen lower left and confirm the Section Table is showing green from another unit o Right click on the table and Remove from server Close the confirming report o Right click again on the table and Add to server Close the report Immediately log the desired Bridgemate as this Section table The Bridgemate that logged on incorrectly will now not work and need be reset using the TD Key server is outside the range of the Bridgemate and cannot communicate with the Bridgemate server and the Bridgemate are not communicating over the same channel region setting in BCS does not match the region setting of the Bridgemate firmware region Logging off Bridgemate The End of session message is displayed on Bridgemates that have completed all rounds and sent all the results These Bridgemates are returned to the Bridgemate Pro start up screen and are automatically logged off from the server The status column of this table will turn red again indicating that the session has been completed on this table A clear overview is given of all the active tables All Bridgemates with the green status display are still in use Bridgemates log off automatically at the end of the session also there are two altnerative options to log off manually Use the reset function
68. et Insert batteries into the Bridgemate Pro scoring devices or server WARNING Improper use of batteries may result in battery fluid leakage overheating or explosion Released battery fluid is corrosive and may be toxic It can cause skin and eye burns and is harmful if swallowed To reduce the risk of injury Keep batteries out of reach of children Do not heat open puncture mutilate or dispose of batteries in fire Do not mix new and old batteries or batteries of different types e g carbon zinc and alkaline batteries Remove the batteries if they are worn out or before storing your Bridgemate Pro system for an extended period of time When removing batteries from the Bridgemate or server do not use your fingers or finger nails to remove the batteries use a blunt object like a screwdriver or pen to safely remove the batteries f abattery leaks remove all batteries taking care to keep the leaked fluid from touching your skin or clothes If fluid from the battery comes into contact with skin or clothes flush skin with water immediately Before inserting new batteries thoroughly clean the battery compartment with a damp paper towel or follow the battery manufacturer s recommendations for cleanup Dispose of batteries in accordance with Local and National Disposal Regulations including those governing the recovery and recycling of waste electrical and electronic equipment WEEE Remove batteries aboard aircraft Before boa
69. for each Bridgemate will need to be configured For more information on how to configure the Bridgemates please see Chapter 5 Operating instructions The Bridgemate server is very easy to use Only a few instructions need to be followed The following rules must be observed supplied power adapter may only be used with the Bridgemate server Under no circumstances should another adapter be used Under no circumstances should the power adapter be connected to the data port of the Bridgemate black connector at the back as this may cause damage to the Bridgemate hardware This data port may only be used with the Bridgemate communication cable and tournament director s key Under no circumstances should the Bridgemate communication cable and TD key be connected to the power adapter connection of the server Install the batteries as indicated Incorrectly installed batteries could damage the server During use make sure the server is placed horizontally a level surface Do place any objects on the server make sure there is as much distance between the server and other objects as possible The fewer objects there are between the Bridgemates and the server the better the data exchange will be Where possible make sure the Bridgemates and the server are not separated by wall The server should preferably be placed in a central location between the Bridgemates If this is not possible place the serve
70. he criteria and choose Ascending or Descending for each criteria Select Apply sort to start sorting the results Round and Board Monitor Use Round monitor to view the number of boards that have been reported from each table in play This enables Directors to identify slow players and visit the table if necessary Board monitor shows which boards have been played at each table Result Matrix The Result matrix shows the scores as a grid where the scores are outlined for each table and board This provides a quick way to locate view a specific score Go to Tools gt Options gt General tab to select the desired display The grid can be shown in four different formats e Boards horizontally tables vertically Use for Mitchell movements e Tables horizontally boards vertically Use for Mitchell movements e Boards horizontally declarer vertically Use for Howell or Mitchell where every pair is unique e Declarer horizontally boards vertically Use for Howell or Mitchell where every pair is unique Creating Reports Hand record data from the right hand display may be copied to an external file For example this can be used to create a report that compares the results achieved by the various teams that played each board e Gotothe menu Tools gt Show hide columns to select the columns to be in the report e Select the records by highlighting the first entry for the report hold the Shift key down and press End or use the key to se
71. ich in turn is activated The Bridgemate cannot operate if the corresponding table has not been added to the server Tables can only be added once to the server If you attempt to add a table that has already been added to the server an error message will be displayed To add a table to the server go to the Client tables tab select the relevant tables right click on one of the tables and select Add to server The tables will now be added one by one to the server and the corresponding movement loaded per table An overview of the added tables will be displayed Removing tables It is also possible to remove tables from the server using the Client tables tab Select the tables you would like to remove right click on these tables and select Remove from server The tables will now be removed You will not be able to use any Bridgemates that are configured to these tables Synchronize recover Synchronizing the server and client All data relating to the tables is saved separately in both the result file and Delete tables rom server which are notin session the server In the event of a temporary disconnect between the server and the PC there can be discrepancies between the server and the result file dd to cient These discrepancies can be rectified using the Session gt Synchronize recover menu function which are notin server Add to server Check the relevant options to indicate your synchronization preference
72. ient name Worse still it may even be counter productive if both servers are operating over the same channel Use different channels for each server especially if the servers are within range of each other Only use the same channels if you are sure that the servers are not interfering with each other e g in different buildings Using ACBLscore and Bridgemates on a Network ACBLscore and the Bridgemate Scoring System can be used on a network where the ACBLscore program and Bridgemate Control Software BCS software both operate on a single computer Each separate client computer will run its own BCS program and open the single result file e g 070904E bws on the ACBLscore computer ACBLscore Computer Configure the C ACBLSCOR GAMEFILE folder for Network sharing and change my files by a remote computer In BCS Server gt Show Tables highlight tables controlled on the remote computer s and click Delete Table s The BCS option Tools gt Options gt General Mode Club single computer should be checked Remote Computer s Open BCS program and check the BCS option Mode Club single computer Tools gt Options gt General Use File gt Open to manually open the bws file on the ACBLscore computer BCS lower left Highlight tables to add to this client gt right click and click Add to client Note The tables not added above will not be in this remote server If the Bridgemates
73. in electrical and electronic equipment For more information about where to drop off electrical and electronic waste contact your local city municipality office your household waste disposal service or the shop where you purchased this product Introduction 5 Introduction Thank you for purchasing your Bridgemate II scoring system Bridgemate Il is an advanced electronic scoring system for bridge clubs and tournaments designed to enhance the enjoyment of bridge Bridgemate automatically registers board results The scores are verified and fed to the central PC Tournament directors will value the user friendly features of Bridgemate II as it enables them to focus fully on their core tasks This manual describes the operation of the Bridgemate Scoring system including the central software program the server and the Bridgemate scoring devices This manual serves as an addition to the manual supplied with your scoring program As the Bridgemate Scoring system operates independently from the scoring program this manual includes instructions for operating ACBLscore but not other scoring programs This manual consists of the following chapters e The components of the Bridgemate Scoring system are explained in Chapter 1 A brief and concise explanation is given of the individual components and how they relate to each other e Chapter 2 explains how to configure and install the Bridgemate software and hardware and how to configure th
74. ings on Page 19 for specific details See Chapter 8 for information on using ACBLscore as your scoring program Installing the server Power supply To operate the server please ensure it is connected to the power adapter or is fitted with batteries The server cannot operate without a power adapter and or batteries If batteries are not installed in the server and AC power is lost any unsaved data in the server will be lost Read the safety instructions at the front of this manual before installing the server Power adapter 9 12V power adapter is supplied with the server Plug the adapter into the wall socket and the into the black connector on the top of the server The green LED on the server will light up indicating that the server is now connected to commercial power Batteries Batteries are used if there is no commercial power source or as a back up in the event of power failure The battery compartment on the bottom of the server holds four AA 1 5 volt batteries included Install the four batteries as indicated A red LED will light up indicating that the batteries have been installed correctly and no power adapter is being used The approximate operating time of the batteries is 50 hours Warning e Always install the batteries as indicated Incorrectly installed batteries could damage the server and the batteries The batteries may start leaking potentially damaging the server and voiding the warranty 10 Chapter 2 H
75. instance to change it directly in the scoring program If however the score has not yet been read this change can be performed in BCS and then it will be read into the scoring program correctly Note that any changes made to the results in the result file will be fed back to the server Bridgemates will therefore show the edited result in the overview of previous results If you wish to change a score from the result matrix double click on the score to pop up the edit score window Deleting results To delete a board result right click on the entry you would like to delete and select Delete score To delete multiple records simultaneously highlight the first record hold the Shift key down and use the or key to select the records you would like to delete alternatively hold the left mouse key down and select records The result will also be deleted from the server A new score can be entered in the Bridgemate Note Deleted records will not be removed from ACBLscore if the result s were already posted into ACBLscore Scores cannot be deleted through the result matrix Processing data in the scoring program For information on how to read and process data from the Bridgemate result file please consult Chapter 8 Using Bridgemates with ACBLscore or the manual supplied with your scoring program Opening and closing result files If no result files are open in BCS options are limited The Session menu is inactive and no server data can
76. ivated yet within their server since these units are logged into the other server You may wish to use Bridgemate Pro s and 5 in separate sections e g Section A uses Bridgemates Il and Section B uses Bridgemates Pro However the units may even be mixed within a Section e Scores are exchanged between the two systems Scores entered in Bridgemate Pro will also appear on the Bridgemate II scoring devices and vice versa Ascoring program movement update will first be carried out by Bridgemate 11 and a few seconds later by Bridgemate Pro This is done automatically e the second instance of BCS is accidently closed it can be started again by using the same BCS menu Session gt Run Bridgemate Pro concurrently It will remember that it has already been started before and will not start from round 1 but instead continue from where it was when the program was closed e Since Bridgemate II has more settings than Bridgemate Pro Bridgemate Pro will only use those settings that are for Bridgemate Pro For example names may appear on Bridgemates II but will not on Bridgemates Pro 44 Declaration of Conformity Declaration of Conformity Federal Communication Commission Declaration of Conformity DoC Statement Responsible party Bridge Systems BV Address Postbus 21570 3001 AN Rotterdam The Netherlands Hereby declares that the product Product Name Bridgemate Pro Wireless Scoring System Table Terminal Model No BM11R11
77. layed and this will also appear in the result list and result matrix Bridgemates of section B which are still in round 3 will automatically move on to round 4 Chapter 3 Bridgemate Control software 19 Program Settings Options Change program functions using menu Tools gt Options gt General 8 SS View File locations Scoring program To disable the automatic server detection while the program is running check Disable server detection You may wish to do this ee when BCS is running without a server connected During sessions a however you are always advised to leave this function unchecked Erase original records of deleted scores Show Bridgemate options when starting r To close BCS automatically at the end of a session check Close program at end of session This requires that all tables at least one time during the session have been logged in with their status indicators green and at end of the session all tables have finish and are logged off Bridgemate ser server detection Does not disable server detection at startup Autopower off period 1hour The Erase original records of deleted stores is required when using ACBLscore To view the settings that Bridgemates will be used before the Bridgemate system is actually started check Show Bridgemate options when starting new session This allows the TD to verif
78. le for a while i e no buttons have been pressed No data will be lost when the Bridgemate switches off Simply press the OK button to continue as before In other words you can continue entering results as soon as the Bridgemate has been activated again The default autopower off time is set to 20 seconds This value can be changed to between 5 and 60 seconds See Chapter 6 for more information Activating the Bridgemate When switching on the Bridgemate for the first time you will be taken to the main screen BRIDGEMATE PRO v2 3 2a US version number and language code may differ Press the OK key again to view the Bridgemate s Section Table settings The default setting is Section A Table 1 Configuring Bridgemates for Section Table entry at each table at the beginning of a game session 1 Bridgemates may be configured for manual Section and Table entry at each table at the beginning of each game session When the Bridgemate Pro screen displays insert the TD key in the Bridgemate The following screen will appear SECTION A TABLE 1 2 Use the minus key to change the display to read SECTION SEL TABLE SEL 3 Press OK to confirm the SEL configuration The screen will now display CHANNEL 0 4 If you wish to leave the channel number unchanged press To use a different wireless channel press the CANCEL button to delete the number then enter the ne
79. lect the desired records Chapter 3 Bridgemate Control software 15 e Right click on the highlighted records and select Copy scores to clipboard e The comma delimited data may then be pasted into an external program Such as Word and Excel Note If the result file i e O70904E bws is opened by a different client computer the results will not be immediately displayed in the right hand panel Follow the procedure shown under Managing tables Taking over tables from another client on page 16 Result bws file tables may be imported direct into Excel 2007 2010 Data gt Get External Data From Access gt change lookup to All files gt change file extension from bws to mdb gt Open gt select desired table gt Open Changing and deleting board records Changing records Right click on the record you would like to change and select Edit score A detail screen will appear displaying all the score data You can now edit the result Declarer is pair that played the hand NS EW is the declarer player contract is C D 4 S no trump NT double x redouble xx pass PASS Enter a space between the value of the contract the contract type and double redouble With American Style enter the numbers of tricks taken or number of tricks down If the board result has already been read by the scoring program it makes little sense to change the board result in BCS It would be better in this
80. lient to the result file open the result file on the relevant client Confirm that the client is to be logged in to the result file The result file may now be used Managing tables Tournament network mode Assigning tables to a client Once a result file has been opened all tables of the result file will be displayed In Tournament network mode the All tables Client column will display the currently assigned Client or not assigned if the table is not assigned to any client To assign a table to the client you are currently using right click on the table and select Add to client To add multiple tables simultaneously select the table by clicking and holding the left mouse button and the Shift key or use the Select all function to select all the tables Once the table has been added to the client the client name will be stored in the table You can only assign tables to the client PC you are currently using If you are using multiple clients in a network the result file will need to be opened manually per client and the tables added to that client Taking over tables from another client To transfer a table that has already been assigned to another client to your own client repeat the above procedure Right click on the table and select Add to client and confirm you would like to take over the table from another client Overview of tables assigned to a client The client to which the tables have been assigned is displayed in th
81. limited to Bridge Systems its distributors agents affiliates and suppliers No information oral or written or suggestions given by Bridge Systems its distributors agents or suppliers or its or their employees shall create a warranty or condition or expand the scope of this Limited Warranty Also there is no warranty or condition of title quiet enjoyment or noninfringement in the Hardware Device You may have greater rights existing under legislation in Your jurisdiction 2 Limited Warranty D EXCLUSION OF OTHER DAMAGES TO THE FULL EXTENT ALLOWED BY LAW BRIDGE SYSTEMS AND ITS DISTRIBUTORS AGENTS AFFILIATES AND SUPPLIERS ARE NOT LIABLE FOR ANY i CONSEQUENTIAL OR INCIDENTAL DAMAGES 1 DAMAGES OR LOSS OF ANY NATURE WHATSOEVER RELATING TO LOST PROFITS BUSINESS INTERRUPTION LOSS OF DATA OR PRIVACY OR CONFIDENTIALITY ANY INABILITY TO USE ALL OR PART OF THE HARDWARE DEVICE PERSONAL INJURY OR ANY FAILURE TO MEET ANY DUTY INCLUDING BUT NOT LIMITED TO ANY DUTY OF NEGLIGENCE GOOD FAITH OR OF WORKMANLIKE EFFORT OR iii INDIRECT SPECIAL OR PUNITIVE DAMAGES ARISING OUT OF OR RELATING IN ANY WAY TO THE HARDWARE DEVICE THE FOREGOING APPLIES EVEN IF BRIDGE SYSTEMS OR ANY DISTRIBUTOR AGENT AFFILIATE OR SUPPLIER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH LOSSES OR DAMAGES AND EVEN IN THE EVENT OF FAULT TORT INCLUDING NEGLIGENCE STRICT OR PRODUCT LIABILITY MISREPRESENTATION OR OTHER REASON Some jurisdictions do not allow the e
82. ly enter the names of new players and those without a number Use the up arrow key to move into the player name field when there is only one player in a pair Before or after the auto stratify manually enter the names of players not shown in the Player Names file With Allow Auto Stratification see page 37 you will be prompted to confirm the strata for each team Note When using a Mitchell Rover movement the will be no opportunity for the bump team that moves to different tables to enter their player numbers Use F3 to enter the names of the bump team players Board Results Once boards have been played and the results recorded on Bridgemates the information may be posted into ACBLscore Typically this is done periodically throughout the game This will also enable the scorer usually the director to spot any anomalies that might occur The BMP command F11 followed by B M P or is to read board results from Bridgemate and post them into ACBLscore Posting will automatically stop at the end of the penultimate round to accommodate the preparation of a next to last round report After the penultimate round has been posted one or more additional post commands are needed to read all of the final results Ctrl P is a shortcut for this command When a board is not going to played at a table it should be recorded as a no play Enter 0 on the Contr line and press O
83. m stores the results in its own files The results are therefore stored in five locations in total In the event of data loss in one of the five locations it is possible to check whether the results are still stored at the next level up and to reprocess the results from there Scoring program data loss In the event of data loss in the scoring program check whether the results are still stored in the BCS result file The recommended method is to launch BCS from the Windows Start menu gt All Programs gt Bridgemate Pro Once BCS is started up go to the File gt Open menu and select the result file with the bws extension used for your session If the results appear on the screen they have been stored in the result file The results can now be reprocessed from the scoring program For further information about processing Bridgemate results see the instructions included with the scoring program BCS data loss If the result file contains no results see the above mentioned step it is possible to retrieve them from the server and to read them in the result file The first step is to check whether the results are still stored on the server Use the Server gt Show all scores menu for this purpose All the results stored in the server will now be shown If the correct results are shown it is possible to read them manually using the Server gt Show tables menu Select all tables hold down the Shift key and with the left mouse button down move
84. mate settings can be changed via the menu Tools gt eh Options gt Bridgemate tab mcs cot Maximum results to show Unlimited oars Bridgemate settings can be specified either by the scoring program Show contacts using or by BCS If you want your scoring program to control Bridgemate ar settings choose Use Bridgemate Pro settings specified by Scoring Ee program The settings information is included in the result file by the scoring program Consult the manual of your scoring program for se more information on how to set Bridgemate settings through the 0 Brea ee scoring program Select Use Bridgemate Pro settings specified by Board order verfioation a N Bridgemate Pro Control when you want to manually set the ae a Bridgemate settings disregarding the information provided by the scoring program Displaying previous results To enable the Bridgemate to display an overview of previous board results of this game check the Show previous results option If you would also like to display your own score check the Show own result option Your table is indicated by an on the Bridgemate screen To enable the players to display multiple overviews check the Repeat results box Limit the number of scores to be displayed by entering a maximum number To remove the limitation set the ma
85. n as entered the section game is over Results and reports can be displayed and printed using F4 F5 and or F8 as desired e Before a score has been accepted in a Bridgemate the TD key can be used to separately assign an arbitral score AVG 40 AVG 50 or AVG 60 for and for N S e Scores already accepted recorded in a Bridgemate but not yet posted into ACBLscore can be corrected using the TD Key See Erasing entry chapter 5 page 29 Insert the TD Key press 3 OK to confirm Erase result enter board number and press OK The erroneous result is erased and the new may entered e Scores already posted into ACBLscore must be corrected there To erase a score in ACBLscore type x e See 27 for Special entries Pass out and board not played Quick Setup Tips 1 Early game session setup Single or multi section games sessions may be set up early in ACBLscore Extraneous information such as expected movement Event rating stratification criteria Event Information Tournament data etc may be entered before the stress of actual play being started It is suggested ACBLscore be preset with fewer tables than are actually expected in single or multi session game session Do not start BCS at this time gt Then when play is ready to start a Use F935 Change movement parameters and change to the actual movement tables etc b multi section session repeat the F9 gt 5
86. n the Bridgemate server is not in use you may need to disconnect all cables and cords from the server to keep them out of the reach of children and pets Do not allow children to play with cables and cords Do not place any part of the Bridgemate system on a bed sofa or other soft surface Do not place any part near heat sources such as radiators heat registers stoves or amplifiers Avoid smoke and dust Do not use the Bridgemate Scoring system in smoky or dusty locations Smoke and dust may damage the Bridgemate server and scoring devices Connect the Bridgemate server to power WARNING As with many other electrical devices failure to take the following precautions can result in serious injury or death from electric shock or fire or damage to the Bridgemate Pro system Select an appropriate power source for your Bridgemate server Use only the power adapter that came with the Bridgemate server or that you received from your Bridgemate supplier If you are not sure if you have the correct power adapter stop using it and contact Bridgemate US If you need a replacement power adapter contact Bridgemate US as well e Confirm that your electrical outlet provides the type of power indicated on the power adapter in terms of voltage V and frequency Hz e Do not use non standard power sources such as generators or inverters even if the voltage and frequency appear acceptable Only use AC power provided by a standard wall outlet e D
87. normal Bridgemate use Change after people have started member number and or score entry Ask players to hold up any further Bridgemate entries until the movement change has been completed e If the movement change will move pairs around player numbers will need to be entered manually later However if pairs remain at the same tables even though they may now have different team numbers e g when change from a 5 table Howell to a 6 table Howell or a 6 table Howell to a 7 table Mitchell ACBLscore BMN Post Names from Bridgemate will correctly assign pairs to the correct tables when the member number option is being used e Make the movement changes as noted above ACBLscore automatically updates BCS with the new info Note When BCS is updated there will normally be an update screen displayed See above Replacing Bridgemate during play Bridgemate appears to have stopped working use the TD Key and reset 0 The unit should log off and ready to be returned to service The alternative is to program a spare Bridgemate as a replacement e In BCS to Server gt Show Tables highlight the table number involved the Status indicator should be green click on Log off table s e Log in the replacement Bridgemate as the desired Section Table If necessary use the TD Key to program the replacement unit for the desired Section and Table e The reprogrammed Bridgemate should now be us
88. o not overload your wall outlet extension cord power strip or other electrical receptacle Confirm that they are rated to handle the total current in amps A indicated on the power adapter and any other devices that are on the same circuit To avoid damaging the power cord and power supply e Do not wrap the power cord around the power adapter Protect the power cord from being walked e Protect cords from being pinched or sharply bent particularly where they connect to the power outlet the power adapter and the Bridgemate Pro server Do not jerk knot sharply bend or otherwise abuse the power cord e Do not expose the power cord to sources of heat 4 Safety Instructions e Keep children and pets away from the power cord Do not allow them to bite or chew on it e When disconnecting the power cord pull on the plug do not pull on the cord Do not let the power supply hang from the power cord If a power cord or power supply becomes damaged in any way stop using it immediately and contact your Bridgemate supplier Only use the power supply and AC power cords supplied with your Bridgemate Scoring System or received from your Bridgemate supplier Unplug the Bridgemate server during lightning storms or when unused for long periods of time Always connect the power cord according to the following instructions 1 Fully insert the power supply cord into the Bridgemate Pro server 2 Plug the power adapter into the wall outl
89. on the number of score points obtained on this board will be displayed Depending on the BCS setting the number of score points will be displayed as assigned to the North South pair or to the Declarer Confirming board result East or West verifies the data displayed on the verification screen If this data is incorrect East or West will press CANCEL to edit the data If the result is correct East or West will press OK to confirm the result The message Entry completed will now be displayed The data is saved and sent to the server It is now no longer possible for players to edit the results Overview of percentage achieved and previous results optional Once East or West has confirmed the board result players have feedback options for viewing their achieved result and board results achieved by other pairs Depending on the BCS settings the following information can be displayed e Achieved percentage for the entered board result e Overview of scores at other tables on the entered board If one or both of the functions is activated the message Entry completed will also display the text Show results Press OK to view information on the achieved board result The percentage achieved on the board will be displayed first This is done by reviewing the other results registered on the board the value of the entered score and how the entered score compares with the other results This percentage will have little significan
90. on cable enables you to connect the Bridgemate scoring devices directly to the PC This in turn enables you to read the board results stored in the Bridgemate memory manually or to install new firmware in the Bridgemates Tournament directors key TD Key The tournament directors key TD key for short is a small key that enables the tournament director to configure the Bridgemate for each section and table and to activate the special TD menu Bridgemate Control Software A specific program is required to control the server from the PC Bridgemate Control Software BCS This program runs on Windows 98 or higher and is controlled in part by your scoring program BCS fully controls the server and data exchange between the server and the PC BCS first saves all the relevant session data used by the server to control the Bridgemates BCS then retrieves all entered board results from the server and stores these in the result file All other server controls are also executed from BCS In addition the following three components are important Although they are not supplied together with your Bridgemate Scoring System they are of crucial importance to the correct operation of the system Client Personal computer with Bridgemate Control Software e Result file Scoring program Client Bridgemate Control Software runs on a so called client Windows based personal computer PC The scoring program and BCS usually run on one client PC
91. ore will be installed on the same client PC Connect the Bridgemate Server to the Computer The server has a standard 9 pin serial port connector If your computer has a serial port connect the server directly to that port If there is no serial port use the ATEN plug and play USB to serial RS 232 converter to add a hardware serial port to client PC Insert the converter in a free USB port If the converter does not install automatically see the converter s instructions and driver CD for the installation Note The same USB port should always be used Do not use a USB hub See Special note when using the USB to serial converter on Page 10 Chapter 2 The 64 bit Windows 7 and Vista require USB to Serial Adapter driver version 3 3 0 1 All 32 bit and previous Windows versions require the USB to Serial Adapter driver version 2 0 2 1 The Server requires electric power supplied by an external power adapter or 4 AA batteries e When the server is being used with the power adapter the 4 batteries should be installed to provide backup power if there is an AC power interruption This will preclude inadvertent loss of scoring data e When powered the Server is active waiting to receive radio signals from Bridgemates thus to conserve the batteries the battery power rocker switch on the top of the server should be off the O position or one or more of the batteries should be removed when the server is not in use
92. ound option to Erase results from prior enone starting rounds will appear If this is checked all Bridgemates will start from the selected round However this will erase all movement info of the previous rounds and delete all scores from the server for those rounds Be very cautious with this functionality If you only want to move the Bridgemates to the next round use the Close rounds function Erase results from prior rounds and continue Bridgemates from round 3 Note The scoring program normally updates all movements in BCS automatically It is therefore not necessary to invoke this function manually Closing rounds Select sections Bridgemate hasn t received all the scores of a round and it needs to be moved on the Section A next round for example due to late play or when players didn t enter their score in the Meme Bridgemate you can simply close the round in BCS and force all Bridgemates to move on to the next round Go to menu Session gt Close rounds Select the sections of which you want the Bridgemates to move on and select the number ker al of round you wish to close For example if you want all Bridgemates of section B to move on the 4 round then select only section B by deselecting the other sections set close rounds 1 till 3 not 4 and press Close rounds All missing scores up to round 3 for all tables of section B will be filled up with Not p
93. pdate the result file and effect the changes in BCS Chapter 8 Using Bridgemates II with ACBLscore 41 Always post all scores before making any movement changes in ACBLscore Especially if adding pairs or making special changes using EDMOV post all scores using 11 gt or Cirl P before making any changes Note When BCS is updated there will normally be a Report screen displayed This screen may closed or BCS will Report Movement updated by external program Deleting old movement data section A table 1 OK automatically close it after 1 minute Adding round 1 Adding round 2 When ACBLscore updates BCS deleted table s or section s may not actually be removed Thus it is recommended that any deleted oe table s and or section s be manually deleted logged off in BCS to adding round 7 preclude possible confusion if someone inadvertently activates a seas deleted table or deleted section Bridgemate Updating section A table 1 708 Deleting old movement data section A table Z OK Adding round 1 Adding round 2 Change before any Bridgemates have been used When the changes be made before players have started entering ___ Fert their member numbers and or results instruct players to delay any entries until the changes are made After the ACBLscore changes have been made and BCS has been updated players may begin
94. play the Region and Channel being used Tables The bottom left hand corner of the screen lists the tables in play In Club single computer mode only the Client tables is visible In Tournament network mode there two tabs All tables and Client tables Below these tabs is a list of tables The All tables tab contains all the tables stored the result file These are generally all the tables used in the session The tables must be assigned to a client The Client tables tab displays the tables assigned to the client PC you are currently using The name of this client is displayed in the bottom left hand corner of the screen If you are using one PC for your sessions all tables will be assigned to the same client In this case the tables and Client tables tabs contain the same tables If you are using multiple clients e g in big tournaments the All tables tab contains all tables in the session the tables may be assigned to different clients The Client tables tab only displays those tables assigned to that specific client The scoring program will create the result file for you It is assumed that only one client is used The program will automatically assign all tables to the PC you are currently using You do not need to perform any manual changes Manual changes are only required during big tournaments involving a network with multiple clients and servers Received board results All board results read from the server ar
95. r as closely as possible to the Bridgemates along the edge of the playing room When removing batteries from the server Bridgemates do not use your fingers or finger nails to remove the batteries use a blunt object such as a screwdriver or pen to safely remove the batteries 12 Chapter 3 Bridgemate Control software Chapter 3 Bridgemate Control Software The Bridgemate Control Software BCS program is the bridge between the result file and the server BCS reads the session data from the result file and loads it into the server so that the server can control the Bridgemates Then BCS retrieves the entered board results from the server and stores these in the result file BCS has been designed for simplicity and ease of use and is very user friendly This chapter contains information on the basic and advanced functions of BCS For general program use it is not necessary to know all the information contained in this chapter When first starting the system be sure to read the o paragraphs Launching Bridgemate Control Logging in and logging off Bridgemates and Board results first Launching Bridgemate Control Bridgemate Control Software is launched from your scoring program Depending on your scoring program there are several ways to launch BCS The majority of scoring programs have a launching function enabling fully automatic activation of the Bridgemate server using the existing and active result file For
96. r more board results to the server the results may be read manually into BCS at the end of the session Bridgemate Control Software Connect the Bridgemate Communication Cable to a serial port of your PC On the BCS menu select Session gt Read Bridgemate Locally i Connect the Bridgemate communication cable to the serial port and click OK Click OK on the screen display Cancel Read Bridgemate locally Connect the Bridgemate Communication Cable to the Bridgemate via the data port at the back of the Bridgemate Press OK on the Bridgemate Status Activate Bridgemate and connect it to the communication cable All board results from Read Bridgemate locally this Bridgemate are read and stored in the result file along with any of Status this Bridgemate s results that were already received by the server Caren Bicones These results can now be processed in the scoring program in the Reading data for section A table 2 usual way They are also displayed on the BCS screen Ready This function can be used for example in the event of PC and server data loss See Chapter 7 page 33 Server data loss for more information about the applicable procedures in the event of data loss Options Bridgemate Bridgemate Bridgemate Il Bridgemate settings Use Bridgemate settings specified by Scoring program No session active Bridgemate Control Results Interval settings All Bridge
97. rding any aircraft or packing the Bridgemate scoring devices or server in luggage that will be checked remove all batteries The Bridgemate server and scoring devices can transmit radio frequency RF energy much like a cellular telephone whenever batteries are installed Do Not Attempt Repairs Do not attempt to take apart service or modify the Bridgemate server Bridgemate Pro scoring devices power supply or its peripherals in any way Doing so could present the risk of serious injury or death from electric shock or fire and it will void your warranty Any evidence of any attempt to open and or modify the Bridgemate Pro system including any peeling puncturing or removal of any of the labels will void the Limited Warranty and render the Bridgemate Pro system ineligible for authorized repair Disposal of Waste Electrical and Electronic Equipment in the European Union and other countries regions with separate collections systems This symbol on the product or its packaging means that this product must not be disposed of with household waste Instead it is your responsibility to hand this over to an applicable collection point for the recycling of electrical and electronic equipment This separate collection and recycling will Je help to conserve natural resources and prevent potential negative consequences for human health and the environment which inappropriate disposal could cause due to the possible presence of hazardous substances
98. red on your computer BCS will display a warning message Download the software from one of these sites e Windows XP https www microsoft com en us download details aspx id 17851 e Windows Vista SP2 Windows 7 SP1 Windows 8 8 1 https www microsoft com en us download details aspx id 42642 6 Chapter 1 Description Bridgemate Pro scoring system Chapter 1 Description Bridgemate Scoring System This chapter describes the components of the Bridgemate Scoring S ystem and how they relate to each other It also explains how to use the Bridgemate System from creating a session in your scoring program to registering the scores in the scoring program Please read this chapter carefully Once you understand the function of the individual components and how they relate to each other you will quickly get to grips with the Bridgemate Scoring System Description of components The Bridgemate Scoring System consists of the following hardware and software Bridgemate Pro scoring devices Bridgemate server power adapter USB to serial converter Bridgemate communication cable Tournament directors key Bridgemate Control Software 9 USB to Serial converter dongle Bridgemate Pro scoring device Bridgemate Tournament directors key Bridgemate communication cable TD Key Bridgemate Pro scoring devices The Bridgemate Pro scoring devices are placed on the bridge table and are used to enter the result
99. ridgemates if the server s region differs from the Bridgemates region firmware Chapter 2 Hardware Configuration 11 Setting the channel The Bridgemate Scoring System can communicate over different radio channels This enables users to install multiple systems next to each other without causing interference see also Chapter 6 Multiple clubs To enable a Bridgemate to communicate with the server it must be set to the same channel as the server The number of channels at your disposal depends on the region in which you are playing The default setting for the Bridgemate and server is channel 0 for each region Setting Bridgemate channel The channel over which the Bridgemate Pro communicates is set using the same menu used for changing the section table settings The tournament director TD key is used to perform this operation See also Chapter 5 for more information SECTION A 1 Set the section and the table first and press OK The following screen will appear CHANNEL 0 Press the CANCEL button to delete erase the set value and enter the new value Press OK to save the new settings Setting server channel The channel over which the server communicates is set via Bridgemate Pro Control Server gt Channel selection menu For more information on how to set the channels please see Chapter 4 Configuring the Bridgemates Before the Bridgemates can be used in the session the section and table
100. rom BCS This means that the Bridgemate can be updated and new functions can be added The language selection 32 Chapter 6 Additional Bridgemate Functions option for example can also be changed In other words the Bridgemate can be updated without requiring you to purchase new Bridgemates To update the Bridgemate firmware proceed as follows 1 Connect the Bridgemate communication cable to the serial port or the USB to serial Converter 2 Goto Tools gt Bridgemate gt Bridgemate Pro update firmware 3 Press Choose firmware file 4 Select a Bridgemate firmware file to be loaded into the Bridgemate These files have the extension bpf Once the file has been selected the location version number and date of the file are displayed Switch on the Bridgemate and connect it to the PC If the Bridgemate is not switched on connect it first and press OK 6 The program is written in the Bridgemate Wait to disconnect the Bridgemate until the text Writing firmware completed Disconnect Bridgemate is displayed 7 The new program has now been loaded Press OK to activate the Bridgemate 8 Note With the firmware update reload the Bridgemate will be reset to Section A Table 1 Use the TD Key to change the Bridgemate to the desired Section and Table or the optional player entry of section and table The process will be cancelled if an error occurs during loading When this happens disconnect and reconnect the Bridgemate to r
101. s 3 You must determine whether to synchronize the server to the result file or whether to update the result file using the data stored in the server Use Ute mover tenn Tables in server which are not in client Use this option to determine what to do with tables stored in the server but not assigned to the client To delete these tables from the server select Delete from server add them to the client select Add to client Tables that have already been assigned to another client can only be assigned to the current client if the Take over from other client option has been checked If this box has not been checked the tables cannot be added to the client Tables in client which are not in server Conversely some tables may have been assigned to the client but not to the server To add these tables to the server select the option Add to server To delete these tables from the client select the option Delete from client This option also allows you to delete all the tables from the result file by checking the Delete from session option Delete tables from server which are not in session The synchronization function will also verify whether the server contains tables not contained in the result file These are so called obsolete tables Check the Delete tables from server which are not in session option to delete these tables from the server If this option is unche
102. s For the purpose of simplicity we shall refer to these input devices as Bridgemates Wireless communication between the Bridgemates and the server is established and maintained using radio frequency waves Only one Bridgemate is required per table The use of the Bridgemates is explained in more detail in Chapter 5 Bridgemate server The Bridgemate server server for short is a small device connected to the PC It acts as a bridge between the PC and the Bridgemates Pro As the PC cannot communicate directly with the Bridgemates the server is a vital component The server is equipped with a radio transmitter and a receiver establishing and maintaining wireless data communication with the Bridgemates The server sends all movement data to the Bridgemates including board numbers and pair numbers and receives the board results in return The server can control up to 128 Bridgemates simultaneously The server can be powered by either an external power adapter or by 4 AA Batteries Chapter 1 Description Bridgemate Pro scoring system 7 USB to serial converter The server is connected to the serial port of your PC If your PC does not have a serial port use the USB to serial converter included with the Bridgemate server To add a serial port to your PC connect the converter to a USB port on your PC It is recommended the same USB port be used every time Do not use a USB hub Bridgemate communication cable The Bridgemate communicati
103. sessaueeecececeeeauscecececsenensaaeeeeeens 15 OPENING AND CLOSING RESULT FILES seccstsvsscsesasdestsdsssesentssoosledsscescesanacnaevecsonestsnsedestestous oeasiecesecnsesantessoeksdsesesdecassasesdaseevastansocasnestes 15 USING MULTIPLE CLIENTS isscciscissscseccccecasssescecesiescsscsscesssessdensissdescadeodasscscsvessticestceshecdessededdecessctsescticcsdcestessessedesdeessschsesondcasdcsadcedease 16 ADDING A CEIENT THE RESULT FILE sasscscssssasseccesdsesecsctassevastestesantsvonssssssooneoesdbeetetessoncceadtesenseeoecaeassbaseodsusesdutasousesdaseesentseseorsvestes 16 MANAGING TABLES TOURNAMENT NETWORK MODE ssssssssscssssssssssccccsssssscscccscsssssssscccsscesscsssececcssesssssscecssssssesssecscesessssesoess 16 SERVER CONTROL scssccssescseaciesanacsoctsnasescasdsosessensssoeasbecsesanesntoctsvestosedssnsseteece SEE EREET EEI 17 ACTIVATING THE SERVER ceced3 gested cea Cocoa slaved sce svgev 17 ADDING TABLES 17 IREMOVING TABLES Sepeusebces dh EET E E E 17 SYNCHRONIZING THE SERVER AND CLIENT e e ernten enn enr E E E AE Ea ENEN E Eo Ee E EEEE EEEa N ENES NEE IAEE a EREI 17 RECOVERING THE SERVER i E ES SENEESE SEE AEE AE ESEE ESE EEE OESE SEE E ET E E OE 18 UPDATING MOVEMENT IN THE SERVER aiee reer erne aN en Vrone SENESTE OE E
104. sscsssnsssssscscnssssssassnsssssssssesssssascnsssssnascasssssascnesssssascnssssssasones 43 USING BRIDGEMATES AND BRIDGEMATES PRO TOGETHER cssscsssssssssssssssssscsssssssnscsssscscnscsesssscnsssesssscnscsssssscnsssssnsscnsssessssones 43 DECLARATION OF CONFORMITY sassoni oenedl eo oie naa 44 Limited Warranty 1 Limited Warranty IMPORTANT PLEASE READ THIS LIMITED WARRANTY CAREFULLY TO UNDERSTAND YOUR RIGHTS AND OBLIGATIONS The term Hardware Device means the Bridge Systems hardware product The term You means either an individual or a single legal entity who will be referred to in this Limited Warranty as You and Your A WARRANTIES 1 Express Warranty Subject to the terms and conditions of this Limited Warranty and in lieu of any other if any express warranties Bridge Systems warrants that under normal use and service on the date of acquisition as shown on Your receipt or similar proof of payment and for the period of time stated below for the applicable Hardware Device hereafter each defined as the Warranty Period that the Hardware Device will substantially conform with the accompanying Bridge Systems packaging and documentation As to any defects discovered after the Warranty Period there is no warranty or condition of any kind Warranty Period For all hardware parts of the Bridgemate Scoring System one 1 year This Limited Warranty does not cover and no warranty of any kind is provided wi
105. sssscssnasssssssonsssssssssnsssssssssnssssssssonssssssses 9 SYSTEM REQUIREMENTS ss sssacesesssvsecdsnscbsnessnsdssoncoscnsssonsssecdesssesexesssestencssesncesesesssacssseienseseetesdessedshceseeasescesovencesestsesseseuessesesteacseneuseseese 9 INSTALLING BRIDGEMATE CONTROL SOFTWARE BCS ccssssccssssccccssscccssssccccssssccccssccscessacccessnsecscnscaccssaccccsssaccscnsceccsssaccscssseeces 9 INSTALEING THE SERVER iissa 9 POWER aE E 9 CONNECTING THE SERVER TO tego ta eRe a aeRO ave 10 SETTING THE REGION bocce sane saeco ea vce ove eae Sa ae EE AACS aE eae A ORS Wea Bane ARG E 10 SETTING THE CHANNEL bette nee eR GE SNe vege GEES Ua Tame Reva Bt Bene 11 CONFIGURING THE BRIDGEMATES svsccscecssesssosnsstesseczccssostssecscastcssnessessessosscoussedeeessuessdosesssssoadesseonsesesssoacsesacsescdssocdeessasseasseseeseess coats 11 OPERATING INSTRUCTIONS sssssscsskesdassesccsscoascsnensasocsecesesossevesessascsvectssbaceussasdesetsossvessceseesteaseceedscoassetbasessessdoessoesooscecdeassevensonaceesesese 11 CHAPTER 3 BRIDGEMATE
106. th respect to any subjective or aesthetic aspects of the Hardware Device The express warranty stated above is the only express warranty made to You and is provided in lieu of all other express or implied warranties and conditions except for any nondisclaimable implied warranties that exist including any created by any other documentation or packaging No information or suggestions oral or in a record given by Bridge Systems its distributors agents affiliates or suppliers or its or their employees or agents shall create a warranty or condition or expand the scope of this Limited Warranty 2 Limitation on Duration of Implied Warranties If You are a consumer You may also have an implied warranty and or condition under the laws of some jurisdictions which is hereby limited to the duration of the Warranty Period Some jurisdictions do not allow limitations on how long an implied warranty or condition lasts so the foregoing limitation may not apply to You B EXCLUSIVE REMEDY Subject to applicable law and the following and provided that You return the Hardware Device to Your place of acquisition or if that place will not accept the return to Bridge Systems with a copy of Your receipt or other bona fide proof of payment during the Warranty Period Bridge Systems will at its option and as Your exclusive remedy for breach of this Limited Warranty and any implied warranties repair or replace the defective Hardware Device or make payment to You
107. the cursor over all the tables to select all the tables and then click on Retrieve scores The results of the selected tables are retrieved from the server and processed into the result file The results can now be read by the scoring program Server data loss If neither the server nor the result file nor the scoring program contains any data your next resort is to retrieve the results from the individual Bridgemates All results entered in each Bridgemate are stored in the internal memory of the Bridgemate until the Bridgemate is used fora new game The information can be read into the result file using the manual connection between the Bridgemates and your PC Use the Bridgemate communication cable for this purpose See Chapter 6 Reading results manually in Bridgemate for more information Warning The board results are stored in the internal memory of the Bridgemate Once the Bridgemate has been started up again for a new session the memory is erased and all the data removed This procedure is executed after you have pressed OK in the SECTION TABLE screen and the Bridgemate has logged into the server When retrieving the results from the Bridgemate please ensure that no players are operating the Bridgemates so as to avoid the Bridgemate logging into the server and erasing all stored data Retrieving results from the log file Results can also be retrieved from the log file All results entered in BCS are stored in the log file To
108. tteries in the opposite direction Instead store them separately Reinstalling batteries in the opposite direction will damage the server as well as the batteries and void the warranty Note Servers supplied since June 2008 have a battery power on off switch With the power adapter disconnected a red LED indicates good batteries Use the on off switch to save battery power When starting a new game turn the switch on the indicator to confirm that the batteries are OK red LED then connect the power adapter Connecting the server to the PC Connect the server to the serial port of your PC If your PC does not have a serial port available use the USB to serial converter which is supplied with the server and connect it to a USB port This adds an extra serial port to the PC The converter comes with a set of software drivers which need to be installed separately See the documentation included with the converter for more information When using a USB to serial converter please ensure the serial port has a port number between 1 and 20 If the assigned COM port is 21 or higher it will must be corrected manually in Device Settings of Windows Control Panel Special note when using the USB to serial converter It is recommended that the USB converter always be connected to the same USB port On some computers Windows will not recognize the converter when it is connected to a different USB port There is an LED in the ATEN USB to
109. ttery notice will be displayed when the battery life is at 25 30 Typical life is 250 300 sessions so even with a low battery notice there is enough battery power for several more sessions When the Bridgemate batteries are critically low there will be a brief battery low note on the screen and the Bridgemate will shut itself off The batteries must be replaced before play can continue The Bridgemate Scoring System is now ready to be used with ACBLscore ACBLscore Setup Help New amp Utilities When the background screen is green the program is in set Path Club Mode Game Options will be visible If the Printer elec has ha eal 5 E set Screen Font screen is pink and or Game Options is not visible switch Tournament Club Mode to Club Mode from Tournament mode Eo TEE vA ON ALiow Auto Stratification Enable Bridgemate functionality usion W7 49 08 13 2007 Copyright c 1991 E A1 low Remote score entry Go to Setup gt Game Options It is recommended that all 3 options be selected Set Bridgemate Options in ACBLscore It is recommended that Bridgemate options be configured in BCS for control by the scoring program ACBLscore Once the Bridgemate options have been set they will be used for all future games until changed 38 Chapter 8 Using Bridgemates II with ACBLscore When a game is first opened press F11 to display the Select Command s
110. ult file are displayed in the right hand table of BCS Per result an overview is given of the corresponding table the round the team the player declaring the game and the contract The registration time and date is also displayed in the result file Remarks are also displayed Not played the Bridgemate indicates that the game has not been played 40 60 arbitral score entered in the Bridgemate Go to the menu Tools gt Show hide columns to select the columns you would like to show or hide Applying filter or sort order As more board results are added and displayed it becomes more time consuming and difficult to find or compare specific results Although you will generally use your scoring program to see the scores you may wish to view the registered data in BCS To display a specific grouping of board results you can apply a filter to the entire list This filter can be configured at the bottom of the screen Enter specific criteria per section table round and board number and NS EW pair number It is possible to enter multiple criteria for example section A table 1 round 3 Per criterion select the filtering preference equal to not equal equal or less equal or greater between and enter the relevant values Select Apply filter to apply the filter To remove the filter and display all board results press Reset filter The sort function can be used to sort the filtered results according to various criteria Select t
111. vailable for this purpose To access this menu please use the TD key supplied with the package Activating the menu To activate the TD menu insert the TD key in the communication port of the Bridgemate This requires the Bridgemate to be switched on and waiting for data to be entered board contr lead result input screen It is for instance not possible to activate the menu if the device is in the verification screen or is displaying an overview of previous results To exit the menu simply remove the TD key Menu options Once you have inserted the TD key the following screen will appear TD MENU The TD Menu seven options 1 enter an arbitral score press 1 2 For overview of the entered scores press 2 3 To delete an entry press 3 Note Only use this if supported by your scoring program 4 If you would like to view the corresponding table and section of the Bridgemate and or the corresponding round and pairs press 4 retrieve status 5 To retrieve an overview of the board numbers not yet entered press 5 To reset the Bridgemate press 0 7 set the contrast of the screen press or Entering an arbitral score It is possible to specify in the Bridgemate that an arbitral score must be entered for a certain board Proceed as follows enter the board number and confirm with OK The cursor is positioned at CONTR Insert the TD key in the Bridgemate to activate the
112. very tab and press the Recover server button All existing data will be deleted from the server and overwritten with the tables and the data contained in the result file The server is synchronized with the current position of the result file This function is ideal if the server loses its data and you wish to reconfigure the server with data that has been recorded in the result file x Updating movement in the server 4 Section Movement data is assigned to all tables added to the server during the synchronization process The synchronization function does not update the movement data of tables already stored in the server and which have Update movement stating 31 not been updated If the movement data of the result file has been synchronized from the scoring program and the scoring program does not order BCS to update this data use the Session gt Update movement function to update the server with the correct movement for these tables All sections are checked by default Uncheck all sections that you do not wish to update By default data is updated from round 1 To update from a later round select another round number using the selection option Press Update now to update the sections with the correct movement Any table data belonging to sections that you wish to update will now be deleted from the selected round onwards A report will be displayed of the executed operations When updating from a later r
113. view the log file go to the Tools gt Show log file menu The selected rows can be copied and saved to an empty text file and printed Automatic processing is not possible the results must be entered manually in the scoring program The actual file BMProLog log is located in the BCS folder normally C Program Files Bridgemate Pro Special Note for Vista and Windows 7 Users Because of Windows security precautions use the BCS option to specify a non Program Files folder where the Log File should be saved See Log file settings Chapter 3 for specific details Multiple bridge clubs playing simultaneously There may be times when two or more bridge clubs are playing at the same time in one building each with their own client PC As the Bridgemate server can incorporate a specific Section table number only once at a time it is not possible for two clubs to make use of one server simultaneously Both bridge clubs will therefore require their own server It is of course vitally important that they do not interfere with each other This problem can be rectified by Chapter7 Tips for use 35 each club using different Section letters In this case the clubs can communicate with their Bridgemates on the same channel e the systems communicating over different channels The first club sets its system server and Bridgemates to channel 0 while the other uses channel 1 A third and fourth club can then use channel 2 3 etc This
114. w channel and press OK The Bridgemate will confirm that the settings have been saved The SEL configuration remains active until changed by using the TD key To exit the screen without making any changes simply remove the TD key Pre assigning Bridgemate Section and Table 1 You may program the Section and Table for each Bridgemate To do this when the Bridgemate Pro screen displays insert the TD key in the Bridgemate The following screen will appear SECTION A 1 2 Use and key to adjust the Section Sections range from A to 2 3 Press OK to confirm the section The following screen will now be displayed SECTION D TABLE 1 24 Chapter 5 Use of the Bridgemate Pro scoring devices 4 Use the number keys to set the correct Table number Press CANCEL to delete the current number Table numbers range from 1 to 511 5 Press OK again to confirm the table number The screen will now display CHANNEL 0 6 If you wish to leave the channel number unchanged press OK To use a different wireless channel press the CANCEL button to delete the number then enter the new channel and press OK The Bridgemate will display a message informing you that the settings have been saved The Bridgemate will retain these settings until you next change the section and table number In other words these settings will be retained even after the session has been completed It is therefore not necessary
115. xclusion or limitation of incidental or consequential damages so the above limitation or exclusions may not apply to You E EXCLUSIONS FROM COVERAGE This Limited Warranty shall not apply and Bridge Systems its distributors agents affiliates and suppliers have no liability under this Limited Warranty if the Hardware Device is used for commercial purposes including rental or lease is modified or tampered with is damaged by Acts of God power surge misuse abuse negligence accident wear and tear mishandling misapplication or other causes unrelated to defects in the Hardware Device is damaged by programs data viruses or files or during shipments is not used in accordance with the accompanying documentation and use instructions or is repaired modified or altered by other than a Bridge Systems authorized repair center and the unauthorized center causes or contributes to any defect or damage F REGISTRATION You need not register Your acquisition of the Hardware Device for the Limited Warranty to be effective G BENEFICIARY To the extent allowed by applicable law the Limited Warranty is only made to You the first purchaser of the Hardware Device and there are no third party beneficiaries of the Limited Warranty It is not intended for and does not apply to anyone else except as required by law including anyone to whom You make any transfer of the Hardware Device H FURTHER INFORMATION Bridge Systems is
116. ximum to unlimited To display the board result percentage achieved so far check the Show percentage of own result box When multiple sections are calculated as one check the option Group sections for results The percentage will be calculated across all sections and the results on all boards with the same number are shown in the previous results overview Especially in this case it is recommended to set a maximum number of scores you want the Bridgemate to show Without doing so the players will use up a greater amount of time reviewing the results at large sessions Displaying score points The score points can be displayed from the perspective of the declarer or from the N S direction of play In the latter case score points are obtained by displaying E W as an opposite score 4H making 5 by E W is displayed as 450 or 650 This applies both to the score points displayed in the verification screen for E W and to the percentage overview screen The overview of previous board results always shows the scores as N S scores Chapter 6 Additional Bridgemate functions 31 Entering results Results can be entered in three ways as overtricks downtricks as the total number of tricks won or by using the American style tricks made down The default setting is overtricks downtricks Displaying the pair number If you do not wish to display the pair numbers in the round information screen disable the Show pair numbers
117. y if all settings are correct and make changes where needed before the movement is actually loaded into the server Tab View Options General General File locations Scoring program When ACBLscore updates the movement the result is shown on the Display Resch mairi BCS screen through a report window You may manually close this aeeoo report or it will close automatically after 60 seconds Grocott Table board Board declarer American style Declarer board American Style should be displayed for North American operation Show contract score points Result matrix display options are discussed in Chapter 8 score points Contracts and score points Options General File locations Seating progam The default Log files location is the User Appdata folder Note this is normally a Windows hidden folder Should you wish to use a non hidden folder the Other General View Log files Rae folder should be checked then use 1 seecae to specify non Program E Usa appdata foka Files folder such as C ACBLSCOR Double click on C ACBLSCOR to use as the log C Dither folder file location Special Note When BCS is being used by more than one Windows L f User a single log file may be desired

Download Pdf Manuals

Related Search

Related Contents

Manual del usuario  Bravetti TO23H User's Manual  RegCM Version 3.1 User's Guide  Simple Logger® para Voltajes de Excepción CA Modelo L215  IBM 8271 F12 User's Manual  Auto SureFloat™  PD8136 - Vivotek  3M WR421LE  User Manual  

Copyright © All rights reserved. Failed to retrieve file