60W LED MOVING HEAD LIGHT USER MANUAL
Contents
1. DOWN 2 r tilt ENTER DOWN OFF UPon ENTER 4 X Positive and negative direction Press DOWN key three times r Pan Press ENTER key press DOWN key for OFF Press UP key for ON and then press ENTER key X DOWN 3 r PAn ENTER DOWN OFF UP on ENTER 5 Auto Rotation Function Press DOWN key four times display Audi Press ENT key Press UP key display OFF self checking press ENTER key Display Audi Press DOWN key Press ENTER key for two times Displayer Red for Indicator Light then come into sound active 6 Sound active function Press DOWN key four times Display Audi Press ENTER key Press UP key Display ON sound active Press ENTER key Display Audi Press DOWN key and then press ENTER key two times Display RUN Green Indicator Light with show then come into sound active 60W LED Moving head light VI TEST Press UP or DOWN key can browse other function Press ENTER UP OR DOWN ENTER 1 Test mode Press UP or DOWN Key choice other mode press ENTER SHOW RUN test running if you need set out press ESC UP OR DOWN ENTER RUN 2 Master Control This feature will allow you to run the test was necessary to make the host send DMX sync signal to the Vice machine Press UP or DOWN key Choice other mode press ENTER Show ON for master machine lunch signal DMX signal Indicator Light turn on on show OFF not lunch signal2. 60W LED MOVING HEAD LIGHT USER MANUAL Please read over this manual before operation the light 60W LED Moving head light I 1 1 Packing list Product name quantity Mini moving head light 1 pcs Signal cable 1 base Power line 1 base 1 2 Unpacking instructions Immediately upon receriving a fixture carefully unpack the carton check the contents to enrure that all parts are present and have been received in good condition Notlfy the shipper immediately and retain packing material for inspection if any parts appear damaged from shipping or the carton itself shous sings of mishandling Save the carton and all packing materials In the event that a fixture must be returned to the factory it is important that the fixture be returned in the original factory box and packing 1 3 AC Power To determin the power requirements for a particular fixture see the label affixed to the back plate of the fixture or refer to the fixtures specifications chart A fixtures listed current rating is its average current draw under normal conditions All fixtures must be powered directly off a switched circuit and cannot be run off a rheostat variable resisto or dimmer circuit even if the rheostat or dimmer source voltage matches the fixtures requirement Check the fixture or device carefully to make sure that if a voltage selection switch exsits that it is set to the correct line voltage you will use Warning Verify that
3. DMX Signal indicator light turn off Press ENTER Save set out press ESC not save Set out set up ON Later you must break off outside DMX Controller connection and Can not have two more of the same set of hosts in the same way VI Channels Function Channel function Scale Description CH1 dimmer 0 255 all closed all open 0 10 close light CH2 LED strobe sc opetan 40 240 strobe slow fast 241 255 open light 0 15 White light 16 31 Color 1 32 47 color 2 CH3 Baler 48 63 color 3 64 79 color 4 80 95 color 5 96 111 color 6 112 127 color 7 60W LED Moving head light full colors gradually change 128 191 rainbow effect fast slow 192 255 bu colors gradually change rainbow effect slow fast 0 127 The whole step and speed CH4 Color effect 128 255 The step and speed CH5 level 0 255 0 450 CH6 Vertical 0 255 0 270 CH7 prism 0 31 NO prism 32 255 prism 0 127 Angle CH8 Prism rotation 128 191 clockwise turn from fast to slow 192 255 clockwise turn from slow to fast CH9 zooming 0 255 0 15 white light 16 31 1Gobo 32 47 2 Gobo 48 63 3 Gobo 64 79 4 Gobo Fixed pattern 80 95 5 Gobo CH9 96 111 6 Gobo 112 127 7 Gobo 128 191 hal colors gradually change rainbow effect fast slow 192 255 bs colors gradually change rainbow effect slow fast Rotation 0 15 White light patter
4. e fixture at temperatures higher than this In the event of a serious operating problem stop using the unit immediately Never try to repair the unit by yourself Repairs carried out by unskilled people can lead to damage or malfunction Plesse contact the nearest authorized technical assistance center Always use the same type spare parts Don t connect the device to a dimmer pack Make sure the power cord is never crimped or damaged Never disconnect the power cord by pulling or gugging on the cord 3 60W LED Moving head light Avoid direct eye exposure to the light source while it is on Il Specification LED LAMP 1pcs LED 60W white Master Slave mode AUTO mode Sound Active mode DMX512 control mode 12 DMX channels Voltage frequency LIAC 110V 120V AC220V 240V 50 60HZ Power 80W Working environment Indoor20 C 40 C III Display window 4 key function Main Function 1 ESC exit key 2 UP decrease key OFF Function Key 3 DOWN on key 4 ENTER Confirm key IV 6 function setup as follow 1 Reset function Press DO key reset puree ENTER key rst DOWN rset ENTER rst 2 Setup the address code Press ENTER key display 001 512 Press DOWN decrease press UP Increase Press ENTER ENTER 001 512 DOWN UP ENTER 3 Y Positive and negative direction press DOWN two times display r tilt Press ENTER press DOWN key OFF Press UP key ON and the press the ENTER key Y
5. n CHIR 16 31 1Gobo 32 47 2 Gobo 60W LED Moving head light 48 63 3 Gobo 64 79 4 Gobo 80 95 5 Gobo 96 111 6 Gobo 112 127 7 Gobo full col adually change 128 191 ul colors gradually g rainbow effect fast slow colors gradually change 192 255 pcd g rainbow effect slow fast Rotation 0 127 Angle of rotation pattern CH11 128 191 clockwise turn from fast to slow 192 255 clockwise turn from slow to fast 0 127 The whole step and speed CH12 Pattern effect 128 255 Micro stepping and speed 60W LED Moving head light
6. the voltage select switch on your unit matches the line voltage applied Damage to your fixture may rosult if the line voltage applied does not match the voltage indicated on the voltage selector switch All fixtures must be connected to circuits with a suitable Earth ground 60W LED Moving head light 1 4 Safety instructions Please read these instructions cy it includes important information about the installation usage and mantenance of this product Please keep this user guide for future consultation If you sell the unit to another user be sure that they also receive this instruction booklet Always make sure that you are connecting to the proper voltage and that the line voltage you are connectiong to is not higher than that stated on the decal or rear panel of the fixture This product is intended for indoor use only To prevent risk of fire or shock do not expose fixture to rain or moisture Make sure there are no flammable materials close to the unit while opearating The unit must be installed in a location with adequate ventilation at least 20in 50cm from adjacent surfaces Be sure that no ventilation slots are blocked Always disconnect from poer source before servicing or replacing fuse and be sure to repalce with same fuse size and type Secure fixture to fastening device using a safety chain Never carry the fixture solely by its heda Use its carrying handles Maximum ambient temperature Ta is 104 F 40 C Do not operat
Download Pdf Manuals
Related Search