SP-1200 Series SIGNATURE PAD USER`S MANUAL
Contents
1. cm 5 9 Depth 12 2 cm 4 8 Height 2 6 cm 1 0 Weight 0 37 kg 12 9 ounces Operating Temperature OC to 45 C Storage Temperature 20 C to 60 C Humidity 85 RH non condensing OS Support Windows 98SE 2000 XP SDK Support VB and Visual C Output Format BMP Agency Conformance FCC Class A CE Page 2 22. POSIFLEX SP 1200 Series SIGNATURE PAD USER S MANUAL Rev AO l FEATURES ITO resistive touch pad over 3 8 FSTN LCD in USB interface Adjustable LCD backlight contrast Display area 3 H x 2 3 V with resolution 320 x 240 Touch resolution 500 dpi Tethered non electronic stylus Low power consumption 70 mA 5V DC under USB interface Provides smooth bitmap and resolution required for signature verification Simultaneous view of electronic signature on LCD pad simulating familiar pen and paper experience and monitor for visual comparison with original card signature FCC NOTICE This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions manual may cause interference to radio communications It has been tested and found to comply with limits for a Class A digital device pursuant to subpart J of Part 15 of FCC Rules which are designed to provide reasonable protection against interference when operated in a commercial environment Operation of this equipment in a residential area is likely to cause interference in which case the user at his own expense will be required to take whatever measures to correct the interference WARRANTY LIMITS Warranty will terminate automatically when the equipment is opened by any person other than the authorized technicians The user should consult his her dealer for the problem happened Warranty voids if the
3. st the screen surface may damage or even break the glass surface Any consequent damage of such mistreatment is not covered by the product warranty and the manufacturer denies any liability of that 2 OPERATIONS When the signature pad is powered on through the USB interface connection the LCD panel backlight is turned on and then a name POSIFLEX displayed in the LCD panel for a few seconds The pad is then ready for controls from the software program The contrast adjustment is the only mechanical adjustment control on the signature pad itself Page 1 2 Contrast adjustment Please refer to the picture at right and Stylus __ use fingernail or some proper tool to turn the recessed contrast Op MS Coiled Tether adjustment knob to obtain best viewing effect of LCD under lighting condition of application environment USB Cable gt Signature catching The area on the signature pad for signature catching is designed to be fully controlled by the application software The maximum size is the full 320 times 240 pixels Please note that there is still a safety gap of less than 4 mm or 0 3 width between edges of this maximum area and the inner edges of the plastic opening Of course it is free to the programmer to limit the signature catching area to be part of the maximum area Contrast Adjust with some indication display for other control functions if required Other control functions The area outside the signat
4. ublisher of this documentation TRADE MARKS AND SERVICE MARKS POSIFLEX is a registered trademark of Posiflex Inc an ISO 9001 and ISO 14001 certified manufacturer C Other brand and product names are trademarks and registered trademarks and service marks of their respective owners P N 18 1 10900020 II INSTALLATION 1 HARDWARE INSTALLATION Connect the USB cable to an USB port of the host system Place the signature over a comfortable flat surface for application Insert the stylus in the stylus hold at top middle of the pad Should this device be connected to an USB HUB it is most advisable to use a self powered USB HUB 2 DRIVER INSTALLATION The software development tool kit with sample code for this device is available in Posiflex Product Information CD or also in web site http www posiflex com or http www posiflex com tw The software programmer can develop the application software accordingly and include the driver and library with the software There is no need for driver installation in end user s concern as long as the operating system accepts USB HID human interface device lll OPERATION GUIDE 1 PRECAUTIONS Advice Applying a protective film smoothly and evenly over the screen surface may help greatly the endurance against minor scratches Warning Never apply anything other than the attached stylus on the screen surface for normal signature writing Any hard objects such as a ring when pressed again
5. ure catching area can be organized by the software programmer to provide control functions from the signature pad that may include backlight turning on or off clearing the last signature made saving current signature into bit map file and clearing display turning buzzer function as response to touch on signature pad on or off and so on Demo program The demonstration program in the software development tool kit is an example program having control touch buttons of Clear and Accept outside the signature catching area This mode is called as User Define Mode in the sample program This program also provides switching to Full Screen Mode no touch control button on signature pad and Sleep command force signature catching inoperative till Reset Disconnection Please disconnect the signature pad from the system only when the system is powered off or at least when there is no longer any application program controlling the signature pad running in the system IV SPECIFICATIONS ITO resistive transparent touch pad Sensing Technology Display Type 3 8 FSTN LCD panel with LED backlight Display Signature Area 76 7 mm x 58 6 mm 3 0 x 2 3 Display Resolution 320 x 240 Touch Resolution 500 dpi Actuator Type Tethered springy coiled stylus Interface USB 1 1 compatible to USB 2 0 Power Source 5 V DC in USB port Max Current Requirement 70 mA Width 15 0
6. user does not follow the instructions in application of this merchandise The manufacturer is by no means responsible for any damage or hazard caused by improper application The hardware utility program including instructions for its use is provided AS IS without warranty of any kind Posiflex Inc further disclaims all implied warranties including without limitation any implied warranties of merchantability or of fitness for a particular purpose The entire risk arising out of the use or performance of the software and documentation remains with you ABOUT THIS MANUAL This manual is written in an attempt with full strength to assist the user to utilize the electronic signature capture pad SP 1200 This device is a state of the art signature pad using an USB interface to connect to the host system The manufacturer of the SP 1200 series heartily apologizes to the user for reserving the right to change or to modify this manual without notice due to the rapid and constant progress and improvement on science and technology The user may always obtain the most up to date information through any of our web sites http www posiflex com or http www posiflex com tw Copyright Posiflex Inc 2006 All rights are strictly reserved No part of this documentation may be reproduced stored in a retrieval system or transmitted in any form or by any means electronic mechanical photocopying or otherwise without the prior written consent of Posiflex Inc the p
Download Pdf Manuals
Related Search