Instruction Manual
Contents
1. HDD320G USER S MANUAL IMPORTANT SAFETY INSTRUCTIONS 6 Install Unbalanced the unit horizontally installation may cause damaged to unit 7 When the unit is suddenly moved to a hot area from a cold area it may cause problems In that case turn off the power and turn on after 1 2 hours 8 Install the unit in a place with good ventilation suitable temperature no direct sunrays low humidity low vibration influence 9 Do not put heavy objects on the unit 1 Be sure to read this user manual before starting your operation 2 Never open the cover lt is very dangerous to touch the inside of the unit due to possible electric shock 3 When you dont use this unit for a long time please pull the power cord from the outlet Also do not use a damaged power cord 4 Do not touch the power with wet hand If there is liquid flowing into the unit pull out the power cord immediately because it may cause fire or electric shock 5 Place the unit in a well ventilated and no heat environment Instruction Markings This symbol indicates there is a dangerous voltage within the PVR which may have sufficient magnitude to constitute a risk of electric shock if not handled correctly To avoid the risk of electric shock do not open the housing at any time SHOCK HAZARD DO NOT OPEN RISQUE DE CHOC NE PAS ENLEVER The lightning flash with arrowhea2. That the available selections in audio language window depend on the TV broadcasting service If the service provides several audio languages use keys to select appropriate language and press OK key to confirm 7 2 MUTE By pressing MUTE key on the REMOTE the volume will disappear temporarily and MUTE mark will be displayed on the up right corner The volume will be restored by pressing MUTE key again 7 3 TeleText You can press CC key on the REMOTE to enter the TeleText or Closed Caption windows Only when the broadcaster has provided this service you can open TeleText or Closed Caption windows Except normal view mode you can exit TeleText windows by pressing the EXIT key and exit Closed Caption windows by CC key 29 7 4 Information When watching a channel press INFO key a simple EPG banner that includes current and next program information will appear Duration of banner s display can be modified referring to Common Setup Banner Time Further more SD or HD mark will display at top right corner of this banner according to current TV Program transmitted header By pressing INFO key again at this bar system will pop up a bigger textbox showing more details about current program By pressing INFO key again on the REMOTE to continue reading the next program information Press INFO key once again to return to the normal view mode During the whole operation press EXIT key to exit from this banner at
3. To switch between capitalization and lowcase please select Caps On command and press OK key on the REMOTE Back command allows you to erase the unwanted character in the title bar Move cursor to OK command and press OK key The keypad will disappear and the new name will be shown in the program name column You can define several program names in the same way 3 2 Favorite Edit This window includes the three columns of FAV Selected and Programs While there are no prepared favorite groups in FAV column you can define and modify favorite groups name by using corresponding color keys on the REMOTE And more you can add programs to any favorite group lt gt keys are used to switch among three columns and Up Right keys are used to select item in each column Notice that what will be shown in the Selected and Programs column varies with the favorite group that you have selected in the FAV column How to define a favorite group Press Red key on the REMOTE and will pop up a keypad window where you can define a favorite group name In this keypad window select your required character by using direction keys on the 21 Then the selected character will be shown in the title bar at the top of this keypad window To switch between capitalization and lowcase please select Caps On command and press OK key on the REMOTE Back command allows you to erase the unwanted character in the title bar Move cursor to OK
4. anytime 7 5 EPG and EPG Schedule This is the same as Program Guide When the right list is on focus press OK key you can enter EPG Schedule window then you can reserve program change type Rec or Play and mode once daily weekly press OK to complete it and Exit to back without saved When is success you can see an icon like clock on the right of the item 7 6 Recall the favorite channel Press the FAV key to recall a stored favorite channel Favorite channels are programmed and stored in the Program list menu 30 7 7 HDD File List You can see the record file list as shown in the screen by pressing the HDD key You can see the used percent of hard disk on the left down corner Pressing lt gt key to change view between the group and file lists Ol COV 18 002 4 When File list is focus its program name J 004 corva13 10 start time and duration will display and you can operate as follows Press INFO key to see the information of this file when there is no information it will display this file has no description Press INFO Key again the info will disappear Press OK key to playback this file 7 8 PVR ASSIST PVR Assist is a quite convenient function it will display all the PVR operation according to the current situation and press OK key to start it 7 9 Time shift 7 9 1 Start Time shift When Time shift Start Mode i
5. color key to enter into the program schedule window Press EXIT key to return to main menu 3 Program Manage 3 1 Program Edit Through this window you can edit programs according to your requirements The three color keys on the REMOTE have their corresponding functions Delete Red key Move Green key Rename Blue key lt gt Delete This deletion command allows you to delete one or more unwanted programs permanently First select the program you want to delete and press red key on the REMOTE You can continue to select other unnecessary c 350 103 153 354 355 350 ast 358 350 ao programs and mark them with the crossings And finally press OK key to delete all of them from the list Only one program item can be moved up or down each time Press keys to select program you want to move and press green key on the REMOTE An Up Down Pointed arrow will be displayed right to the selected program You can press keys to move this program to where you want to locate Press green key again to confirm new location 20 lt gt Rename Use A Y key to select the program you want to rename press blue key on the REMOTE and will pop up a keypad window where you can rename the program name In this keypad window select your required character by using direction keys on the REMOTE and press OK key Then the selected character will be shown in the title bar at the top of this keypad window
6. item in the menu or to confirm the desired value in input mode MENU Press to display the Main Menu on the screen EPG Press to display EPG Electronic Program Guide menu FAV Press to display the FAV list EXIT Press to return to the previous menu or escape from the item PVR Functions LIST Press to display the Recorded Program List TEXT Press to enter the teletext window CC Used to turn Closed Caption subtitles on or off PVR ASSIST Press to display the PVR Assist window FIRST Change playback position backward SET MARK Set the bookmark in playback process bar PLAY MARK Press to jump to the next bookmark in playback process bar END Change playback position Forward PLAY Return to Normal Speed Playback from FF FB Slow Paused mode PAUSE Pause from live video or playback step when playback in Paused mode STOP Stop playback when playback or stop recording when recording RECORD Record current service or set stop recording time when recording REW Fast rewind F F Fast forward SLOW Press to slow at 1 2 1 4 speed TIMER RECORD Shortcut to schedule recording 11 The Learning Key Your PVR remote has four learning keys plus a self coding function The keys can be used for the STB remote to function as any of the four keys on your TV remote The recommended keys to use are TV POWER the two grey keys below TV AV and SET The identification of TV AV key varies with the TV type Fo
7. partitioned automatically according EPG items Recorded file name is program name file duration is program duration and file description is program description If current recording service has no EPG information recorded file name is channel name and it will not be partitioned 7 10 5 Stop record Press the STOP key to stop recording You will be asked to confirm 7 11 File playback 7 11 1 Change file playback speed Press the REW FF SLOW keys to change file playback speed a speed icon is displayed in the upper left of screen 7 11 2 Change file playback position Press the Play Red or Blue keys to display playback process bar You can press the Red or Blue keys to change file playing position 7 11 3 Display playing file information Press the INFO key to pop up a bar to show current playing file information 7 11 4 Jump file playback time In the playback process bar you can press number keys to input a time then press the OK key or wait for a while file will play from the time selected if the time is valid 33 7 11 5 Cut out and Save Selected Region 1 Start playback a recorded service SS 00 02 0100 05 01 Minio Show Detail lado fad Te 47 Small Jump Back 0 Esg Jump Bock E QO Mark Curront Play Pos Jump lo Most Mark MOR Presa OK yeu can mark and sart do Filo Gut 2 Press Play Red or Blue button to display Pla
8. 1111 1 19 53 Program 7 1 1 0 20 Se 1 1 1 5 20 5 7 1113590 21 A Program een 1111 0 9 23 E N 24 5 4 RECO FIIS 7 3 16 110 111 0 24 A NS CU 0 25 SPVR 0 0 0 7 9 0 26 6 iaa 26 5 333 3 7 737311100 0 27 6 System Setting 6 1 Common Set 6 2 Video Set 6 3 Audio Set 6 4 Time Zone Adjust 6 5 System Information Shortcut Key Explanations AENA T2 MUTE ati 7 3 TIETEXL oreina 7 4 Information 7 5 EPG and EPG Schedule 7 6 Recall the favorite channel 7 7 HDD File List 7 8 PVR ASSIST T ei 7 9 Time shift TADREC Sic 7 11 File playback 7 12 Bookmark SPECIFICATIONS TROUBLE SHOOTING GENERAL INFORMATION 1 Preface Thank you for your purchasing our products This HDPVR is equipped with the latest technology and design it can decode high and standard definition digi
9. Select the time that the PVR icon is displayed on the screen by using lt gt keys Default Recording Duration the default duration of manual record Time shift Start Mode The available options are Never Always and Pause key New setting can work after playing a new service 5 3 PVR Setting O ex moans all records start LATER Minnis mana al Hai CARLER 5 4 Recording Info When you are recording you can see the light down left on the front panel winking And you can enter the Recording info otherwise there will be a message of there is no record going Recording Info will tell you the recording information as follows Index R1 or R2 Mode Quick or Schedule Channel Name File Name you can change the name by pressing OK key Valid Record Time the real recording time Past Time Display the past time Duration the recording will stop until the duration is reached 26 Please be extra careful when using this feature as it will completely erase your hard drive and your will lose any previously recorded content For security purposes you will be asked to enter the password to confirm your decision Default password is 0000 5 5 HDD Format 6 System Setting In the Main Menu use A Y keys to select System Setting item and press OK key to enter into System Setting menu This menu consists of five items You can access its sub menu by highligh
10. TV set too high to lower levels Remove the power cord or Not working Processor stopped l switch AC OFF and ON 39
11. command and press OK key The keypad will disappear and the new name will be shown in the FAV column You can define several favorite groups in the same way REMOTE and press OK key How to modify a favorite group In the FAV column use A Y keys to select one that you want to modify and press yellow key Then a keypad window will pop up for further operation please refer to the above specification How to delete a favorite group In the FAV column the selected favorite group will be deleted from the list after green color key on the REMOTE is pressed Note After you choose to delete the group press the green key the system won t ask you to confirm your deletion So please make sure before you delete the group How to add programs into a favorite group Select one favorite group for example Sports favorite group that you have just defined in FAV column and then move cursor to Programs column In Programs column select programs that have a relation with Sports and press OK key and then those programs will be added into Sports favorite group and shown in the selected column 22 If you want to deselect one program in Sport favorite group move cursor to program that you want to delete from selected column and press OK key and then this designated program will disappear in selected column 4 Program Select In the Main Menu use A V keys to select Program List item and press OK key to enter int
12. d channels Select the channel you want to delete and press green key on the REMOTE you will find the channel have been deleted from the channel list 18 Note After you choose to delete the channel press the green key the system won t ask you to confirm your deletion So please make sure before you delete the channel lt gt Modify Select the channel you want to edit first and then press yellow key to display Modify Channel window The operations are the same as Add In Installation menu move cursor to Factory Default item and press OK key a warning message box will be displayed on the screen press OK key to ensure the default NOTE After restoring default all programs you have searched will be erased and all parameters will return to the factory default Please use this operation with care NOTE Press EPG key on the REMOTE will also enter into Program Guide window directly In Program Guide window the up right small Picture in Graphics PIG and down right program guide list vary with what you have selected in left TV program list Use lt gt keys to move cursor between TV program List and downright list and AW keys to move up or down in each list 1 4 Factory Default 350 NINE DIGITAL 351 143 The selected TV program s EPG is displayed in the down right list Recall key is used to switch among EPG of several future days 19 Press FAV key to change the group Press Green
13. d symbol within an equilateral triangle is intended to alert the user to the presence of un insulated dangerous voltage within the product s enclosure that may be of sufficient magnitude to constitute a risk to persons The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance Servicing instructions in the literature accompanying the appliance Table of Contents IMPORTANT SAFETY INSTRUCTIONS 222aaa enna 1 Instruction Markings 1 1 1 1 1 2 3233 3 3 135 35 1 5 2 GENERAL INFORMATION 2 5 o A 5 das 5 6 ACCO SOES 1 1 1 1 1 1 0 3 131111131 7 4 General OPCraAtlON Ol ST Bi 11111 9 7 8 3 333 1 8 31111111111 1 101 9 3 Remete Gontrol ts 333 3131 10 737 11 1171 0 13 OPERATION 0 0000 16 OE oc i 16 A 3 1111 0 17 1 17 ta Ghamel 1111111 1 0 18 1 4 Factory 10 1 1 19 2 Pogam GUIGG iiss 3333 11111
14. ed file to the group Red key to cancel exist group Green Key to create a new one or Yellow Key to modify its name 24 5 2 Schedule To add a new Scheduled task press the Green key on your remote To delete existing scheduled tasks press the Red key to delete an individual task or press the Blue key to delete all the existing tasks You will have to confirm your Press the EXIT or MENU keys to exit In Add Schedule there are parameters below to be set Schedule Type Rec or Play Schedule Start Time Input wanted time by numeric keys or press OK to enter the sub menu to set the date and time FAV key is used to switch between date and time Schedule End Time hh mm Input wanted time by numeric keys Schedule mode Once Daily Weekly When you choose the mode of weekly press the Ok key you can see the weekday Group select the days you want and press OK key to back Channel Name Select the desired channel Note If record mode is weekly you can choose days from Sunday to Saturday The Schedule will start to record or play when time is up these days every week 25 decision once you press OK Schedule start time offset Schedule record or play to start earlier or later Schedule stop time offset Schedule record or play to stop earlier or later Remind before schedule start Remind you before schedule is going to start Divide Record By EPG Event Select on or off PVR Icon Time Out
15. he selected sub menu To escape the menu system at anytime press EXIT on the remote Note When in sub menus pressing the EXIT key will take you back one step through the sub menus To completely exit from the menu keep pressing the EXIT key on your remote 1 Installation The Installation menu allows two ways to search Marasal A for programs Auto Search and Manual Search Factory 16 For beginners the Auto Search feature is the best choice First use A Y Keys to select Auto Search from the Installation menu Then press OK to enter into Auto Search sub menu The system will automatically search programs under Channel Edit Once the search is complete the newly found programs will be added to the TV program list and your PVR will automatically display the first found channel During the search process you may press the EXIT key to stop or press the OK key to skip Press EXIT key again to exit from this window 1 1 Auto Search 1 2 Manual Search You can set parameters in Manual Search window if you are familiar with relevant parameters In this mode only one channel whose necessary parameters are set in Manual Search window by hand can be searched Channel No Press lt gt key to select proper option among the Channel List that you can edit in Channel Edit window Frequency The value varies with what you have selected in Channel No Bandwidth Press lt gt
16. keys to choice 6M 7M or 8M At the bottom of this window there are two dynamic color bars reflecting the signal s quality and strength You can check whether you have set the antenna well by these two bars After modifying press OK key to start searching Searching well system will turn to view first searched program automatically 17 1 3 Channel Edit Select Channel Edit item in the Installation ca menu and press OK key Then Channel Edit window will be displayed on the screen From here new channel can be added and the existing ones can be edited or deleted ah fale Auto Pato Aibo Fado Sado Ba o Faih N 8 8 5 2 3 3 e 222222 You can use the color keys the REMOTE to execute the corresponding command shown at the bottom of this window Add Red key Delete Green key Modify Yellow key lt gt Add After pressing red key on the REMOTE the Add CTI Channel window where you can set necessary parameters of the new channel will be displayed on the screen Frequency You can input values referring to above by using the number keys on the REMOTE Bandwidth Press lt P keys to choice 6M 7M or 8M Have all above parameters set well press OK key to confirm and exit from the Add Channel window In Channel Edit window you can find that the new channel has been added to end of the list lt gt Delete This command allows you to delete one or more unwante
17. o Program List window From here the default mode is TV mode In program list lt gt keys are used to select desired program and press OK key to view in full screen To watch only selected favorite channels see section Favorite Edit say you had setup 2 favorite Groups 1 All HD channels 2 All SD channels You can use the left and right arrow buttons to select how the program list is displayed You can choose between show ALL or only HD or SD groups which you created earlier Say you choose HD favorite group you will see the Channels you added into this favorite group If you highlight one of these channels and pressed OK the Receiver will go back to normal viewing mode but each time you change channel you will only cycle through channels within your HD favorite group To get back to all channels simply press OK button and get the program list back up and use the Left and Right arrow keys to change the Program list choice back to ALL 23 5 PVR 5 1 Record File Edit You can edit recorded channels in the menu Delete Select a recorded file you want to delete and press Red key Rename Press Yellow key to display the keypad dialog Using the arrow keys on the REMOTE you can edit the file name Lock Press Blue key on the selected file name Record File Edit GroupMgr Press Green key there will show the list of Recorded Group except All Then you can press OK key to add a record
18. onds with by pressing INFO again And then press exit to enter the full screen mode to watch TV program 12 4 Connection Diagram There are various ways to connect your PVR to your TV Important To make use of the twin tuner functionality built in to your PVR you must ensure that you connect the supplied RF crossover lead from LOOP OUT 1 To ANT IN 2 A Using HDMI Cable HDMI is the recommended connection for your PVR if you have a TV with an HDMI input An HDMI connection will allow you to transmit 1080i digital video and digital audio signals using a single lead 1 Connect the antenna to ANT IN of the STB 2 Connect one end of your HDMI lead to the PVR and the other end to the HDMI port on your TV 13 B Connect YPbPr port 1 Connect the antenna to ANT IN of the STB 2 Connect to TV as following figure N 1 14 C Using RCA cable 1 Connect the antenna to ANT IN of the STB 2 Connect to TV by using the supplied AV lead as shown 15 OPERATION In normal view mode pressing the MENU key will display the main menu And keep pressing the Exit key will exit each sub menu until going back to the normal view This menu consists of five menu items as shown below Installation _ Program Guide Program Manage Program Select PVR System Setting Use the A Y keys to move up or down from one item to another Press the OK key on your remote to enter t
19. r example identifying AV INPUT 123 etc You do not need to use your TV remote when watching the digital TV program and services once your PVR remote has been set up to turn on your TV and change to the correct AV channel Instructions to use the STB RCU learning keys 1 Press SET key to keep for more than three seconds indicator light will keep on 2 The TV RCU aims to receiving window on the STB RCU and press the STB RCU key to do learning Such as power key on the TV RCU 3 The indicator light of the STB RCU flashes three times and it indicates that the STB RCU has received signal from the TV RCU 4 And press corresponding learning keys on TV key window of the STB RCU again such as power key the indicator light will plash three times and then extinguish It indicates that the key has learned successfully and is ready to use 5 When pressing keys on the TV key window of the STB RCU the indicator light will flash It indicates that the STB RCU is to control the TV It is the same as the VOL VOL and TV AV keys Appendix 1 When watching TV pressing INFO key on the RCU the information of the current and next channel such as name starting time and ending time will be displayed on the screen The message will disappear automatically in several seconds And also press exit to cancel 2 The description information of the current channel will be displayed on the screen in several sec
20. s Always you can press the Red Blue Key or Pause Key to start it When the mode is Pause you can only start it by pressing Pause Key You can t start time shift when the mode is never Of course you can change this mode in PVR Setting view 31 7 9 2 Change time shift speed After pressing the REW FF Slow or Pause keys to change time shift speed a speed icon will be displayed on upper left of the screen 7 9 3 Change time shift playing position Press the Red or Blue keys to display time shift process bar You can change the time shift playing position 7 9 4 Stop time shift Method 1 Press the Stop key to stop time shift and return to play live service Method 2 Start play new service time shift of old service will be stopped automatically 7 10 REC 7 10 1 Start record Press the RECORD key to start recording A record icon is displayed on the upper left of the screen and the light down left on the front panel is winking The record icon displays recording number duration and recoding name Recording name is in the form of Channel Name Event Name 7 10 2 Change recording information This is the same as 5 4 Recording Info 7 10 3 EPG record and Common scheduled record If scheduled EPG or scheduled REC is reached a new record can also be started For more information refer to Scheduled list 32 7 10 4 Recording file information If current recording service has EPG information recorded file is
21. tal TV programs and can also record and playback terrestrial digital broadcasts You can view a variety of programs provided through terrestrial Simply pressing the power button of the remote control unit the crystal clear picture and DVD quality sound of digital broadcasting that your TV portrays through this product allows you to watch whatever channel you wish off the digital broadcasting network Throughout this manual you will notice that the operation is easy to use In case you experience any difficulties using this product please consult the relevant section of the manual for assistance 2 Main Features MPEG 2 HD SD decoding MP HL ML Fully DVB T amp MPEG 2 compliant Down mixes 5 1 AC3 to two channels encoded with Dolby Prologic Surround also Support PCM digital audio output Bitstream 5000 Editable Channels Auto or Manual installation Electronic Program Guide and Information Plate EPG RF modulator for TV standard PAL B G NTSC Digital Audio Output S P DIF Signal level amp quality indicator Composite video output Auto PAL NTSC conversion Standby with low power consumption Clock adjustment Excellent Performance Fast Channel Change Conversion between SD programs and HD programs YPbPr Output supporting 1080i HDMI output supporting 1080i Digital Reception covers through VHF amp UHF band Wide screen 16 9 and normal 4 3 Aspect Ratio Bandwidth of 6MHz amp 7MHz 8 8MHz Supported TeleText Bi
22. the GREEN key to delete the book mark 35 SPECIFICATIONS Audio sampling frequency Output Format 10801 720p 576p por pwe 36 7 Keys Standby Menu Select Channel VOL Operation Temperature 37 TROUBLE SHOOTING The table below covers some of the more common reasons for abnormal PVR function Front LED s do l Connect power cord properly to l AC power cord disconnected not light the power socket Check your choice of AV or RF Connection of Video or Audio l o is right Check each AV lead at to input terminals is incorrect each end l Check the RF path from antenna Antenna cables incorrectly through both tuners to connected No picture or modulator and RF OUT sound Antenna not delivering clear Check cable connections or signal adjust the antenna l l Call an antenna specialist from No signal or weak signal o local paper or similar Wrong Channel Information in Type values again carefully menu Check that screen shape best Black and white Your TV or PVR picture mode matches your screen and PAL B G is selected Battery exhausted Fit fresh batteries The Remote Fluorescent light interfering e Switch light Off Control Unit is not with remote control signals screen or V Hold does not match broadcast Remote control is incorrectly Point front of RCU carefully towards PVR 38 Distorted Menu Brightness or Contrast level of Adjust Brightness and Contrast Screen
23. ting this item and pressing OK key Transparency The value is from 0 to 30 The transparency of the closed caption that you have seen varies with your selection Banner Time Whenever a new channel is selected an Info bar appears momentarily at the bottom edge of the screen Therefore this setting is provided to set the display duration of the Info bar After setting well press OK or EXIT key to save and exit 27 6 1 Common Set Screen Type 4 3 or 16 9 Aspect Ratio Full Screen Letterbox Pan_Scan Resolve AUTO 1080 7 576P 720P Audio Channel Mode Stereo left right Decoder MPEG or AC3 In this menu user can change time zones for different countries Press the AW keys to change Use lt gt keys to select between Daylight Saving On and Daylight Saving Off for daylight saving Press OK or EXIT key to save and exit 6 2 Video Set 6 3 Audio Set 6 5 System Information From here you can get not only the information about the hardware and software but also product type and release date etc 28 7 Shortcut Key Explanations You can realize some functions in an easy and fast way by pressing some special keys on the REMOTE These keys will be explained as follows 7 1 Audio Press Audio key to display the Audio Selection window Press lt gt key to switch among Left Right Stereo and mix Select the best audio channel output for the current program NOTE
24. tmap subtitle compliant with ETSI EN300 472 S P DIF Digital Audio or Dolby AC3 Stream out RTC Real Time Clock Timer 65536 Color Graphic 8 Favorite Channel List Channel Editing Capability Move Delete complied Lock and etc PVR Functions and Twin Tuner Function Time shift buffering 1 Hours Recording Time up to 100 Hours Depend on HDD Variable Forward Play Speed 2 4 8 16 32 1 2 1 4 1 8 Variable Reverse Play Speed 2 4 8 16 32 1 2 1 4 1 8 Fast Schedule Support Once Daily Weekly mode Region Selection for Replay Variable Combination of Watching and Recording Simultaneously Live Watching or Recording Live Watching or Recording or HDD Playback Grouping for Cascade Playing Particular tips to help you 3 Accessories Please check the following accessories are enclosed 1 x User Manual 1 x Remote Control Unit 2 x AAA Batteries 1x AV Cable Note If any of the accessories listed above are missing please contact the dealer where this product was initially purchased 4 General Operation of STB Throughout this manual you will notice that the everyday operation of your STB is based on a series of user friendly on screen display and menus These menus will help you get the most from your STB guiding you through installation channel organizing viewing and many other functions All functions can be carried out using the buttons on the RCU and some of the functions can also be carried out using the but
25. tons on the front panel Should you experience any difficulties with the operation of your unit please consult the relevant section of this manual including the Problem Shooting or alternatively call your dealer or a customer service adviser NOTE Please be aware that new software may change the functionality of the STB The photo and the function explanation involved in this specification are for reference only If there is any mistake please refer to the entity OVERVIEW 1 Front Panel ee een TT H C When watching change to the previous or next channel or move to the next higher or lower item in the menu 2 Rear Panel ANT Int Tme Ten TT R AUDIO Right audio output L AUDIO Left audio output HDMI video output supporting high definition output YPbPr Component video output Supports high definition output 100 240V Power supply ON OFF Main power switch 5 3 Remote Control Unit Palsonic HDD3206 STB POWER Press to switch between Operation and Standby modes MUTE Press to temporarily cut off the sound AUDIO Switch the audio channel among the Left Right and Stereo modes 0 9 Enter required numbers in the input box or select a channel to watch P Press to scroll page down or up LAST Returns to previous program INFO Press to show information of the current channel Move cursor up down left right Page up down Volume lt 1 77 4 OK Press to execute the selected
26. yback progress bar Press OK key twice then there will be a notice named Please add a start or an end mark position then confirm to cut 0007371000503 Fe Small Jump Foward Big Jump Foward il Mark End of Filocil FAV Resume Al Guts 3 To specify one start point with green key and end point of region with yellow key press ok key 4 You can press ok key to cut and cancel to cancel the operation 00004 05 03 ake Tb E Small Jump Foward Dig Jump Foward eal Mark End of Filocul PERT Resume Al Cuts 34 7 12 Bookmark You can jump to a position directly by bookmark function in file playback To search positions very quickly and easily use bookmarks To add a bookmark press the GREEN key at the position you want to add it into playback process bar You can make the bookmark at maximum 20 positions for one file 7 12 2 Go to a bookmark Press the YELLOW key to jump to the next bookmark in the playback process bar Then the file plays from the bookmarked position 7 12 1 Add a bookmark Trin Bhor Detail are ile i Cd mal Jump lack FE Small Jump Formed 3 Hack Foward Dig Jump Dig Jump Maik Current Play Pos Jump to Marl Matk Presa Ob you can mark and shart do File Cut 7 12 3 Delete a bookmark To remove a bookmark you should jump to the bookmarked position by pressing the YELLOW key and then press
Download Pdf Manuals
Related Search