HU282PPS - User Manual - EN
Contents
1. 60Hz 3 720x480p 60Hz 4 720 5761 50Hz 5 720 576 50 2 6 1280 720 60Hz 7 1920 10801 50 2 8 1920 10801 60Hz 9 1920 1080 50Hz 10 1920 1080 60Hz We ensure that the monitor can be lighted under interlace signal mode but we can not guarantee the image quality 22 User s Manual APPENDIX SPECIFICATIONS Driving system TFT Color LCD LCD Panel Size 71 1 28 Diagonal Pixel pitch 0 16mm H 0 16mm V Video H Frequency 30KHz 80KHz V Frequency 60Hz 75Hz Display Colors 1 073Bcolors Colors Max Resolution 3840 2160 60Hz Plug amp Play VESA DDC2B ON Mode lt 45W Typical Power consumption Power Saving Mode lt 0 5W OFF Mode lt 0 5W Audio output Rated Power 3 0 W rms Per channel DP Input Terminal Bae HDMI 2 1 4 Hor 620 93mm Maximum Screen Size Power Source 100 240V 3 0A 50 60Hz Operating Temp 0 to 40 Environmental Storage Temp 20 to 60 C Operating Humidity 10 to 70 680 1 W x504 1 H x192 D mm Dimensions 26 8 W x19 9 7 5 D Weight NW 8 7 kg 19 14 Ib The above specification is subject to actual product specification and is subject to change without prior notice NOTES The Maximum Resolution will depends on the display card supporting Related issue can refer to http www hannspree eu en monitors FAQ section 232. 0 Power Button Press this button to switch ON OFF of monitor s power Power Indicator Green Power On mode Green flicker Power Saving mode e MENU Turn the OSD menu on at the first time then enter the sub menus at the second time e Adjust v 1 Adjust full slider and number 2 Navigate through adjustment icons when OSD is ON or adjust a function when function is activated Button EXIT main osd function Hotkeys 1 COLOR EFFECT Press key to change monitor color effect Include standard model game model movic model photo model FPS1 model and FPS2 model auto color function press this button more than three seconds only analog input VGA model 2 INPUT SOURCE CHANGE Press key to change monitor source 3 IMAGE AOTO ADJUSTMENT Only Analog Input VGA Model Press Button will start Auto Adjust function 13 User s Manual NOTES e Do not install the monitor in a location near heat sources such as radiators or air dusts or ina place subject to direct sunlight or excessive dust or mechanical vibration or shock e Save the original shipping box and packing materials as they will come in handy if you ever have to ship your monitor e For maximum protection repackage your monitor as it was originally packed at the factory e To keep the monitor looking new periodically clean it with a soft cloth Stubborn stains may be removed with a cloth lightly dampene
3. Check if the Video Card is Plug amp Play compatible Check if any plug pins on the DVI or HDMI or DP connector are bent Adjust the Contrast and Brightness Controls Move electrical devices that may cause electrical interference Computer Power Switch should be in the ON position Computer Video Card should be snugly seated in its slot Make sure monitor s video cable is properly connected to the computer Inspect monitor s video cable and make sure none of the pins are bent Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED The LED should either turn ON or OFF after hitting the CAPS LOCK key Inspect the monitor s video cable and make sure that none of the pins are bent Adjust pixel ao CLOCK and PHASE or press hot key IEA Adjust RGB color or select color temperature Use win 2000 ME XP Right click anywhere on desktop and select Properties gt Settings gt Screen Resolution Use the silder to adjust the reslution and click Apply Make sure PC audio output cable is connected to screen s LINE IN port or AUDIO IN port Make sure the sound volume adjustment can be clearly identified Make sure the System gt Silence option in the monitor menu is on While transferring via HDMI port but no sound is outputted it is recommended to select AUDIO 19 User s Manual SOURCE as a DIGITAL optional and make sure PC audi
4. by looking at the bottom of the base and making sure that the clips are fully engaged in the base ee on REMOVAL 1 Flip over the monitor so that it is upside down 2 Unscrew the screw that holds the monitor in place 3 Gently pull the base from the monitor until they are unattached POWER POWER SOURCE 1 Make sure that the power cord is the correct type required in your area 2 This LCD monitor has an Internal universal power supply that allows operation in either 100 120V AC or 220 240V AC voltage area No user adjustment is required 3 Connect the AC power cord one end to your LCD monitor s AC input socket the other end to wall outlet User s Manual SETTING THE MONITOR ON THE WALL DISSEMBLING THE STAND BASE 1 as Disconnect all the cables and cords from the Monitor to prevent breakage Carefully place the Monitor face down on a soft and flat surface blanket foam cloth etc to prevent any damage to the Monitor Squeeze the sides to release the retaining plastic tabs and pull the stand cover off Remove the screws so that the stand base can be removed Gently remove the stand base nse Hanns G HAN asp HANNSOree For reference only WALL MOUNTING THE MONITOR Hanns G 1 Purchase a VESA compatible wall bracket jaiii VESA 75x75 4 holes M4 7mm 8kg 2 Locate your ideal Monitor position on the wall 3 Fix the wall bracket firmly on the wall 4 Secure the Monitor to the bracket u
5. covered Do not place the monitor on a bed sofa rug or similar surface Do not place the monitor near or over a radiator or heat register Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided e The monitor should be operated only from the type of power source indicated on the label If you are not sure of the type of power supplied to your home consult your dealer or local power company e Unplug the unit during a lighting storm or when it will not be used for long period of time This will protect the monitor from damage due to power surges Do not overload power strips and extension cords Overloading can result in fire or electric shock e Never push any object into the slot on the monitor cabinet It could short circuit parts causing a fire or electric shock Never spill liquids on the monitor Do not attempt to service the monitor by yourself opening or removing covers can expose you to dangerous voltages and other hazards Please refer all servicing to qualified service personnel e The wall socket shall be installed near the equipment and shall be easily accessible User s Manual SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem e Due to the nature of the fluorescent light the screen may flicker during initial use Turn off the Power Switch and then turn it on again to make sure the flicker disappears e You may find sligh
6. end of the AC power cord to the LCD monitor s AC input socket and the other end to Wall outlet Turn on your monitor and computer Hanns G y HANNSpree D OOO IN OUT AC IN Eki HDMI 2 HDMI 1 DP D 0 Figure 2 Connecting to a PC User s Manual ADJUSTING THE VIEWING ANGLE e For optimal viewing it is recommended to look at the full face of the monitor then adjust the monitor s angle to your own preference e Hold the stand so you do not topple the monitor when you change the monitor s angle e You are able to adjust the monitor s angle from 5 to 15 Figure 3 Monitor Angle NOTES Do not touch the LCD screen when you change the angle It may cause damage or break the LCD screen e Be careful not to place fingers or hands near the hinges when tilting the monitor otherwise pinching can result 11 User s Manual OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off The other control buttons are located on the front panel of the monitor See Figure 4 By changing these settings the picture can be adjusted to your personal preferences The power cord should be connected Connect the Signal cable from the monitor to the DVI card e Press the power button to turn on the monitor The power indicator will light up Figure 4 Control Panel Buttons 12 User s Manual FRONT PANEL CONTROL
7. or Off Display Input Setting Vertical frequency Resolution information User s Manual PLUGAND PLAY Plug amp Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD It allows the monitor to inform the host system of its identity and depending on the level of DDC used communicate additional information about its display capabilities The DDC2B is a bidirectional data channel based on the protocol The host can request information over the DDC2B channel THIS MONITOR WILL APPEAR TO BE NON FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY THERE MUST BE A VIDEO INPUT SIGNAL 18 User s Manual TECHNICAL SUPPORT FAQ Q amp A FOR GENERAL PROBLEMS PROBLEM amp QUESTION Power LED is not on No Plug amp Play The display is too dark or too bright Picture bounces or a wave pattern is present in the picture The power LED is ON green but there s no video or no picture Missing one of the primary colors RED GREEN or BLUE Screen image is not centered or sized properly Picture has color defects White does not look white The screen resolution needs to be adjusted No sound is outputted from monitor s built in speaker POSSIBLE SOLUTION Check if the Power Switch is in the ON position Power Cord should be connected Check if the PC system is Plug amp Play compatible
8. to adjust the sharpness of the display Set the value from 0 to 4 COLOR SETTING Adjust the color temperature value of the display according to your preference SRGB User 9300 6500 5800 User s Manual ADVANCE SETTING INPUT SETTING Move the cursor to the User option and select it 1 To adjust the red enter RED option and adjust the level 2 To adjust the green enter GREEN option and adjust the level 3 To adjust the blue enter the BLUE option and adjust the level Adjust the color effect value of the display according to your preference standard Game Movie Photos FPS RTS Adjust the Gamma value of the display according to your preference Off 1 8 2 0 2 2 2 4 Adjust the Hue value of the display according to your preference Select Hue option to adjust the contrast value Adjust the Saturation value of the display according to your preference Select Saturation joption to adjust the contrast value Adjust the Low Blue light value of the display according to your preference Off ON Select the DP OPTION option to switch the function 1 2 or 1 1 Select the DDCCI option to switch the function on or off Adjust the Ultra Vivid value of the display according to your preference OFF L M H Adjust the Aspect Ratio value of the display according to your preference Full 16 9 4 3 5 4 1 1 Adjust the DP EDID value of the display according to yo
9. E 1 The changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment 2 Shielded interface cables and AC power cord if any must be used in order to comply with the emission limits 3 The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment It is the responsibilities of the user to correct such interference 4 Only use attachments accesories specified by the manufacturer WARNING To prevent fire or shock hazard do not expose the monitor to rain or moisture Dangerously high voltages are present inside the monitor Do not open the cabinet Refer servicing to qualified personnel only PRECAUTIONS e Do not use the monitor near water e g near a bathtub washbowl kitchen sink laundry tub swimming pool or in a wet basement Do not place the monitor on an unstable cart stand or table If the monitor falls it can injure a person and cause serious damage to the appliance Use only a cart or stand recommended by the manufacturer or sold with the monitor If you mount the monitor on a wall or shelf use a mounting kit approved by the manufacturer and follow the kit instructions e Slots and openings in the back and bottom of the cabinet are provided for ventilation To ensure reliable operation of the monitor and to protect it from overheating be sure these openings are not blocked or
10. Hanns LCD Display HU282PPS HSG1322 User s Manual User s Manual OSD V6 1 Before operating the monitor please read this manual thoroughly This manual should be retained for future reference This device complies with requirement of EMC directive 2004 108 EC with regard to Electromagnetic Compatibility and 2006 95 EC and 93 68 EEC with regard to Low Voltage directive Optional depend on selected model Socket outlet shall be near the equipment and shall be accessible Trademark Notice H LD mi Hanns G products incorporate High Definition Multimedia Interface HDMI technology The terms HDMI and HDMI High Definition Multimedia Interface and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries User s Manual RECYCLING INFORMATION We at HANNspree care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end of life These devices contain recyclable materials which can be re decomposed and re integrated into brand new marvels On the contrary other material can be classified to hazardous and poisoned substances We strongly encourage you to contact the provided information to recycle this product For more information please visit http www hannspree eu User s Manual TABLE OF CONTENTS SARE T
11. Y NOU NOR et hah eA recite ead a 5 25424 5 SPECIAL NOTES ON LCD 8 6 PEA ORE alto oden 7 CHECKING THE CONTENTS OF THE PACKAGE 7 INSTALLATION INSTRUCTIONS wvscsssssssssssssssssssssssssssssssssssssssssssssssssssssssssens 8 POW BR Greeks RE 8 SETTING THE MONITOR ON THE 9 MAKING CONNECTIONS wiscsssssssssssssssssssssssssssssssssssssssssssssesssssscssssssssssssesssses 10 ADJUSTING THE VIEWING ANGLE wessssssssssssssssssssssssssssssssssssssssssesssssssssees 11 OPERATING INSTRUCTIONS sssssssssossssssorossoorrrsssoorrssssorrrssoorrrrssorrrrrssrrrrssonr ren 12 2 12 FRONT PANEL CONTROL rann 13 HOW TO ADJUST A SETTINGS icsscssssssssssssssssssssssssssssssssnssssssssssssssesssensseses 15 PEOC AND PEAVY a a 18 TECHNICAL SUPPORT FAQ csssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssssess 19 amp A FOR GENERAL PROBLEMS vossssssssssssssssssssssssssssssssssssssssssssssessssessees 19 ERROR MESSAGE amp POSSIBLE SOLUTIONS wesssssssssssssssssssssssssssssssssees 21 45 lt ne 23 SPECIFICATION Sunaina i 23 User s Manual SAFETY NOTIC
12. connector is loose tighten the connector s screws 2 Check the signal cable s connection pins for damage INPUT NOT SUPPORT Your computer has been set to unsuitable display mode set the computer to display mode given in the following table FACTORY PRESET TIMING TABLE HORIZONTAL VERTICAL MORE RESOLUIION FREQUENCY KHz FREQUENCY Hz 1 640x400 70Hz 31 469 70 087 640x480 60Hz 31 469 59 940 3 640x480 67Hz 35 000 66 667 4 640x480 72Hz 37 861 72 809 5 640x480 75Hz 37 500 75 000 6 720x400 70Hz 31 469 70 087 2 800 600 56Hz 35 156 56 250 8 800 600 60Hz 37 879 60 317 9 800 600 72Hz 48 077 72 188 10 800 600 75Hz 46 875 75 000 832x624 75Hz 49 725 75 000 12 1024768 60Hz 48 363 60 004 13 1024 768 70Hz 56 476 70 069 14 1024 768 75Hz 60 023 75 029 15 1152 870 75Hz 68 681 75 062 16 1152x864 75Hz 67 500 75 000 17 1280720 60Hz 45 000 60 000 18 1280x960 60Hz 60 000 60 000 19 1280x960 75Hz 74 592 74 443 20 1280768 60Hz 47 776 59 870 21 1280x768 75Hz 60 289 74 893 2 1280 1024 60Hz 63 981 60 020 23 1280x1024 75Hz 79 976 75 025 24 1360 768 60Hz 60 015 28 1366 768 60Hz 47 852 59 964 26 1440x900 60Hz 55 469 59 901 27 1440x900 75Hz 70 635 74 984 28 1400x1050 60Hz 64 744 59 948 21 User s Manual 39 1600x900 60Hz 55 540 59 978 30 1680x1050 60Hz 65 290 59 954 31 1920x1080 60Hz 67 500 60 000 33 3840x2160 60Hz 74 038 59 950 Video mode MODE RESOLUTION 1 640 480 60Hz 2 720 4801
13. d with a mild detergent solution Never use strong solvents such as thinner benzene or abrasive cleaners since these will damage the cabinet As a safety precaution always unplug the monitor before cleaning it 14 User s Manual HOW TO ADJUST A SETTINGS PICTURE Adjust the brightness value of the display according to your preference Select BACKLIGHT option to adjust the brightness value Adjust the contrast value of the display according to your preference Select CONTRAST option to adjust the contrast value Adjust the BLACK EQUALIZE value of the display according to your preference Select BLACK EQUALIZE option to adjust the contrast value DISPLAY SETTING The auto adjustment function is used to optimize the V POSITION CLOCK PHASE For VGA Input only Select the POSITION option to shift the screen image to the left or right Enter the option and adjust the level For VGA Input only Select the POSITION option to shift the screen image up or down Enter the option and adjust the level For VGA Input only Select the CLOCK option to reduce the vertical flicker of characters on the screen Enter the option and adjust the level For VGA Input only Select the PHASE option to reduce the horizontal flicker of characters on the screen Enter the option and adjust the level For VGA Input only Select the SHARPNESS option
14. o output cable is connected to monitor s LINE IN port or AUDIO IN port For HDMI Input only Addendum related to Windows 7 Windows 8 When you encounter display problem under Windows 7 Windows 8 you need to do the following 1 Make sure your PC computer Hardware requirement can support Windows 7 Windows 8 2 Make sure your video card can run Windows 7 Windows 8 3 If your video card can support Windows 7 Windows 8 need to install the latest Windows 7 Windows 8 driver of your video card Suggest to do the following 1 Install the latest Windows 7 Windows 8 video driver of your video card 2 Try to use the recommended display resolution that is supported by the monitor 3 If the recommended display resolution is not working try the second recommended display resolution 39 6cm 15 6 16 9 1366x768 60Hz 1366x768 75Hz 54 6cm 21 5 16 9 58 4 23 16 9 60cm 23 6 16 9 1920x1080 60Hz 1920 1080 0 50 2 62 5cm 24 6 16 9 68 6cm 27 16 9 70cm 27 5 16 10 1920x1200 60Hz 1920 1200 50 2 And if you still have display problem after doing the above procedure please visit Hanns G support and Service Website http www hannspree eu en monitors Windows is a registered trademark of Microsoft Corporation 20 User s Manual ERROR MESSAGE amp POSSIBLE SOLUTIONS CABLE NOT CONNECTED 1 Check that the signal cable is properly connected if the
15. sing the 4 mount holes on the back and center of the Monitor Note e Please read the instructions of your specific wall bracket to properly wall mount the Monitor e The pitch of the mounting holes is 75mm horizontally and 75mm vertically screws type required is metric M4 7mm length e The Monitor stand base can be screwed on a table or a hard surface using the hole on the back of the stand base For use only with UL listed wall mount bracket Installing the LCD Monitor requires special skill that should only be performed by qualified service personnel Customers should not attempt to do the work themselves Hanns G bears no responsibility for improper mounting or mounting that results in accident or injury You can ask a qualified service personnel about using an optional bracket to mount the Monitor to the wall User s Manual MAKING CONNECTIONS CONNECTING TO A PC Turn off your computer before performing the procedure below 1 2 Connect one end of DVI cable optional to the back of the monitor and connect the other end to the computer s DVI port Connect one end of the HDMI cable optional to the back of the monitor and connect the other end to the computer s HDMI port Connect one end of the DP cable optional to the back of the monitor and connect the other end to the computer s DP port Connect the audio cable between the monitor s audio input and the PC s audio output green port Plug one
16. tly uneven brightness on the screen depending on the desktop pattern you use e The LCD screen has effective pixels of 99 99 or more It may include blemishes of 0 01 or less such as a missing pixel or a pixel lit all of the time e Due to the nature of the LCD screen an afterimage of the previous screen may remain after switching the image when the same image is displayed for hours In this case the screen is recovered slowly by changing the image or turning off the Power Switch for hours e If the screen suddenly flashes erratically or the backlighting fails please contact your dealer or service center for repair Do not attempt to repair the monitor yourself User s Manual BEFORE YOU OPERATE THE MONITOR FEATURES 71 1cm 28 Wide Screen TFT Color LCD Monitor Crisp Clear Display for Windows ERP GP Green Product Ergonomic Design Space Saving Compact Case Design CHECKING THE CONTENTS OF THE PACKAGE The product package should include the following items Warranty Card optional Quick Start Guide Audio Cable DVI Cable optional optional User s Manual INSTALLATION INSTRUCTIONS INSTALL REMOVE Figure 1 Installing and Removing the Base INSTALLATION Align the monitor with the opening in the base Note that the longer section of the base points forward Snap the monitor into its base Fasten the screw Verify that the monitor is securely attached to the base
17. ur preference 4K2K 60Hz 1080P 2560x1440 4K2K 30Hz Select the OD option to switch the function on or off Select the INPUT SETTING option to change among DVI HDMI1 HDMI2 DP source User s Manual AUDIO SETTING Select the VOLUME option to change the volume level Enter the option and adjust the level This function applies only to models with incorporated audio By high volume risk of hearing damage exists Select the MUTE option to switch the function On or Off The availability of this function depends upon the selected model Adjusting the volume while muted cancels Mute mode Adjust the Audio Source value of the display according to your preference Auto Analog Digital OTHER SETTING Select LANGUAGE option to change the language of the OSD Enter the option and select a language Select POSITION option to adjust the horizontal position of the OSD Enter the option and adjust the level Select OSD POSITION option to adjust the vertical position of the OSD Enter the option and adjust the level Select the MENU TIME option to adjust the sharpness of the display Set the value from 10 to 60 Select TRANSPARENCY option to adjust the transparency of the OSD Enter the option and adjust the level Select the FACTORY RESET option to reset to the monitor s default setting This will erase the current settings Enter the option and select On
Download Pdf Manuals
Related Search