Manual - ArtFox Lighting
Contents
1. LED MOVING HEAD Led Spot Series LED Spot 150W RGBW Quad Color Mixing without color wheel This product manual contains important information about the safe installation and use of this projector Please read and follow these instructions carefully and keep this manual in a safe place for future reference ARTFOX LIGHTING USER MANUAL Version 1 0 beta POWER SUPPLIES Input Voltage AC90 240V 50 60Hz Power Consumption 230W LAMP SOURCE Red Butterfly 150W RGBW LED Module 80 000 Hour Average LED Engine Life COLOR SYSTEM RGBW Full Color without color wheel EFFECTS SECTION 2 Gobo Wheels One Fixed Gobo Wheel 7 gobos 5 mental 2 glasses open One Rotating Gobo wheel 7 gobos 5 mental 2 glasses topen Electronic Focus High speed shake effect 3 facet rotating prism Mechanical shutter and adjustable speed strobe effect 1Hz 13Hz Linear dimmer CONTROL AND PROGRAMMING Max 24 DMX 512 control channels DMxX protocol signal USITT DMX 512 Display LCD Display Pan Tilt Resolution 16 bit DMxX signal connection 3 pole XLR input and output BODY Aluminium structure with die cast plastic cover Two side handles for transportation Device locking PAN and TILT mechanisms for transportation and maintenance MOVING BODY Travel PAN 540 TILT 270 CONTROL MODE DMX512 Master slave Auto COOLING SYSTEM Convective Fan Inside NET WEIGHT 14Kg GROSS WEIGHT 16Kg PACKING SIZE 72x45x42. LED Stage Light Mode Auto Mode LED Stage Light Select Program Program LED Stage Light Mode Master Mode LED Stage Light Select Program Program x LED Stage Light Option Settings LED Stage Light Mode Slave SYNC Mode LED Stage Light Mode Slave SAME Mode LED Stage Light Option PanTilt Swap LED Stage Light Select Program Program x LED Stage Light PanTilt Swap OFF LED Stage Light PanTilt Swap ON 5 6 8 Red 0 255 8BitRed 9 Red Fine 0 255 16 Red 6 7 10 Green 8 Bit Green 11 Green Fine 16 Bit Green 7 8 12 Blue 8 Bit Blue 13 Blue Fine 16 Bit Blue 8 9 14 White 8 Bit White 15 White Fine 0 255 16 Bit White 0 9 No Function 10 24 Colour Temperature 2700K 25 39 Colour Temperature 3200K 40 54 Colour Temperature 4200K 55 69 Colour Temperature 5600K 70 84 Colour Temperature 8000K 10 16 Virtual Color 85 99 R 00 114 R G 15 129 G 30 144 G B 45 159 B 60 174 B R 75 255 Virtual Color Rainbow 10 LED Stage Light Option Pan Invert LED Stage Light Pan Invert OFF LED Stage Light Pan Invert ON Level 1 Level 2 LED Stage Light Level 3 LED Stage Light Level 4 Option Tilt Invert Tilt Invert OFF LED Stage Light Tilt Invert ON LED Stage Light Option Display Setup LED Stage Light Display Setup Delay Off LED Stage Light Display Setup Display Invert LED Stage Light Delay O
3. Prism Inserted 15 Prism Rotation 0 540 Angle Degree Indel Forward Rotation from Fast to Slow Stop Reverse Rotation from Slow to Fast 22 23 Call Program 0 255 Line Focus 0 50 No Function 51 100 Preset Program 1 101 150 Preset Program 2 151 200 Preset Program 3 201 255 Preset Program 4 24 Function Stay ina certain value for more than 5 seconds 0 24 Unused Reset Effects Unused Reset Pan Tilt Unused Reset Complete 150 174 Unused 175 199 Unused 200 224 Unused 225 255 Unused 12 DMX TERMINATOR In the Controller mode at the last fixture in the chain the DMX output has to be connected with a DMX terminator This preventselectrical noise from disturbing and corrupting the DMX control signals The DMX terminator is simply an XLR connector with a 120Q ohm resistor connected across pins 2 and 3 which is then plugged into the output socket on the last projector in the chain The connections are illustrated below 2 1 DMX TERMINATOR CONNECTION Connect a 1200 resistor across pins 2 and an XLR plug 3 and insert into the DMX out socket on 120Q the last unit in the chain 2 SETUP OPTIONS PROJECTOR CONFIGURATION AS 0900 FUNC DOWN UP ENTER Projector configuration can be set conveniently via press button switch and LCD display To browse or change its s
4. Reset Effects LED Stage Light Reset Pan amp Tilt LED Stage Light Reset Complete LED Stage Light Manual Operation LED Stage Light Manual Operation Pan LED Stage Light Manual Operation 000 LED Stage Light Manual Operation Titl LED Stage Light Manual Operation Tilt 000 LED Stage Light Manual Operation Red LED Stage Light Manual Operation 000 LED Stage Light Manual Operation Green LED Stage Light Manual Operation Blue LED Stage Light Manual Operation White LED Stage Light Manual Operation Green 000 LED Stage Light Manual Operation Blue 000 LED Stage Light Manual Operation White 000 LED Stage Light Manual Operation Strobe LED Stage Light Manual Operation Strobe 000 Mode Channel nar FUNCTION VALUE DESCRIPTION mode mode mode 0 9 White No Gobo 10 19 Gobo 1 20 29 Gobo 2 30 39 Gobo 3 40 49 Gobo 4 50 59 5 60 69 6 70 79 Gobo7 9 11 17 et ama 80 89 Gobo 1 Shak From Slow To Fas 90 99 Gobo 2 Shak From Slow To Fas 100 109 Gobo 3 Shak From Slow To Fas 110 119 Gobo 4 Shak From Slow To Fas 120 129 Gobo 5 Shak From Slow To Fas 130 139 Gobo 6 Shak From Slow To Fas 140 149 Gobo 7 Shak From Slow To Fas 150 202 Forward Rotation Effect From Fast To Slow 203 255 Forward Rotation Effect From Slow To Fast 0 2 White No Gobo 10 19 Gobo 1 20 29 Gobo 2 30 39 Gobo 3 40 49 Gobo
5. 4 50 59 Gobo 5 60 69 Gobo 6 70 79 Gobo 7 10 12 18 Gobo 30 89 Gobo 1 Shak From Slow To Fas 90 99 Gobo 2 Shak From Slow To Fas 100 109 Gobo 3 Shak From Slow To Fas 110 119 Gobo 4 Shak From Slow To Fas 120 129 Gobo 5 Shak From Slow To Fas 130 139 Gobo 6 Shak From Slow To Fas 11 MSS POWER SUPPLY MAINS MAINTENANCE Connect the power cord as follows L live brown E earth yellow green N neutral blue Use the plug provided to connect the mains power to the projector paying attention to the voltage and frequency marked on the panel of the projector It is recommended that each projector be supplied separately so that they may be individually switched on and off IMPORTANT It is essential that each projector is correctly earthed and the electrical installation conforms to all relevant standards CONTROL CONNECTION DMX OUT DMX IN IN 1 DMX OUT DMX IN IN FUNCTION 1 5 1 GND 2 DATA 3 DATA 2 4 4 N C 5 N C 3 Connection between controller and projector and between one projector and another must be made with a 2 core screened cable with each core having at least a 0 5mm diameter Connection to and from the projector is via cannon 5 pin which are included with the projector or 3 pin XLR plugs and sockets The XLR s are connected as shown in the figure above 3PIN
6. 0 H LED Stage Light Reset Hours NO LED Stage Light Reset Hours YES LED Stage Light Product ID LED Stage Light View DMX Value LED Stage Light Version LED Stage Light Product 10 YERERE kkk REE LED Stage Light View DMX Value Channel 001 000 LED Stage Light Version 1 00F LED Stage Light Load Defaults LED Stage Light Load Defaults NO LED Stage Light Load Defaults YES Note Please disable DMX control signal There is only one Projector to set as a Master in a signal Cable If Master s functions used When multiple projectors work together in synchronous control state Parameters can be transmitted from the master projector to the slave projectors such as DMX channel mode Display setting status and operation mode User memory data is included Before parameters transmitted the projector which will send parameters should be set as a Master and others be as Slaves Level 1 LED Stage Light 150W LedSpot DMX Address 001 LED Stage Light 150W LedSpot Auto P01 S01 Level 2 Level 3 OPERATION MENU Level 4 LED Stage Light 150W LedSpot Master 1 501 LED Stage Light 150W LedSpot Slave 1 501 LED Stage Light 150W LedSpot Slave same LED Stage Light 150W LedSpot Music 1 501 LED Stage Light Address Setup LED Stage Light Reset LED Stage Light Address Setup Address 001 LED Stage Light
7. 3 cm Zoom 12 15 14 TECHNICAL DATA SAFE USAGE OF THE PROJECTO When unpacking and before disposing of the carton check there is no transportation damage before using the projector Should there be any damage caused by transportation consult your dealer and do not use the apparatus The projector is for indoor use only 1 20 Use only in dry locations Keep this device away from rain and moisture excessive heat humidity and dust Do not allow contact with water or any other liquids DO NOT mount the projector directly onto inflammable surface The projector is only intended for installation operation and maintenance by qualified personnel The projector must be installed in a location with adequate ventilation at least 50cm from adjacent wall surfaces Be sure that no ventilation slots are blocked Do not project the beam onto inflammable surfaces minimum distance is 5 5m Avoid direct exposure to the light from the lamp The light is harmful to the eye Do not attempt to dismantle and or modify the projector in any way Electrical connection must only be carried out by qualified personnel Before installation ensure that the voltage and frequency of power supply match the power requirements of the projector It is essential that each projector is correctly earthed and that electrical installation conforms to all relevant standards Do not connect this device to any other types of dimmer apparat
8. 5PIN Note care should be taken to ensure that none of the pins touch the metallic body of the plug or each other The body of the plug is not connected in any way The projector accepts digital control signals in protocol DMX512 1990 Connect the controller s output to the first fixture s input and connect the first fixture s output to the second fixture s input and connect the rest fixtures in the same way Eventually connect the last fixture s output a DMX terminator as shown in the figure below W 120 lt DMX512 DMxX controller To prolong life Regular maintenance should be done for its LED optical System to ensure that the system be in best operational condition If the projector does not function check the fuses on the power socket of the projector if burned they should only replaced by fuses of the same specification Should these be damaged call a qualified technician before replacement The projector has thermal protection device that will switch off the projector in case of overheating should this occur check if the fans work normally or fan and fan shield are blocked by dust If the projector not operational calla qualified technician After cleaned and repaired the projector can be restarted Any maintenan
9. ER SUPPLY MAINS 5 4 CONTROL CONNECTION 0 6 4 DMX TERMINATOR 5 SETUP OPTIONS PROJECTOR CONFIGURATION 5 TO SET THE DMX START 5 OPERATION MENU 6 DMX PROTOCOL 10 MAINTENANCE sess sscecseeceeeeceeeeeceeeeecneeeeenaeeees 13 KEEPING THE PROJECTOR 1 13 TROUBLESHOOTING 13 TECHNICAL 14
10. ce work should only be carried out by qualified technicians KEEPING THE PROJECTOR CLEAN It definitely necessary to keep a projector clean for its reliable use Cooling fans and their shield should be cleaned every 15days LED lamps lens and cover should be cleaned regularly for optimized light output Cleaning frequency depends on how often a projector is used and its operational environment A soft cloth and typical glass cleaning products should be used in cleaning It is recommended to clean the external optics at least once every 20 days Do not use any organic solvent e g alcohol to clean t housing of the apparatus TROUBLESHOOTING ee PROBLEM The fixture can not start ACTION Check if the fuse on the power socket is broken or not Check the status of the fuse The lamp works normal but the fixture doesn t respond to controller Check if the fixture s start address is set properly Check if XLR signal cable is broken or not The fixture only functions gt Make sure the fans work normally and if dirt blocks intermittently fans and fan screens gt Check if the lamps reach the end of their lives gt Check if external and internal optical systems clean or not The beam appears dim and brightness decreases apparently 13 LED MOVING HEAD Led Spot Series LED Spot 150W RGBW 4 in 1 moving head light SAFE USAGE OF THE PROJECTOR 3 POW
11. d or subtract Press button FUNC it will return to the upper menu one by one DMX PROTOCOL Mode Channel Short Standard Extended mode mode mode FUNCTION VALUE DESCRIPTION Pan Pan Moving 0 540 Degree Pan Fine Moving Tilt Moving 0 270 Degree 2 2 3 Tilt 4 Tilt Fine 3 5 Move Speed Tilt Fine Moving Level 1 Level 2 LED Stage Light Manual Operation Fixed Gobo Wheel LED Stage Light Manual Operation Rot Gobo Wheel LED Stage Light Manual Operation Gobo Rotation Level LED Stage Light Manual Operation Fixed Gobo 000 LED Stage Light Manual Operation Rot Gobo 000 LED Stage Light Manual Operation Gobo Rot 000 Level 4 Moving Speed From Fast To Slow Shut Off 0 LED Stage Light Manual Operation Prism LED Stage Light Manual Operation Prism 000 LED Stage Light Manual Operation Prism Rotation LED Stage Light Manual Operation Prism Rot 000 3 Dimmer 10 255 Line Dimmer 0 9 No Strobe 4 Strobe 10 255 Strobe From Slow To Fast 1Hz 25Hz LED Stage Light Manual Operation Focus LED Stage Light Manual Operation Focus 000 LED Stage Light Operation Mode LED Stage Light Mode DMX Mode LED Stage Light DMX Mode Short Mode LED Stage Light DMX Mode Standard Mode LED Stage Light DMX Mode Extended Mode
12. etup options Press button ENTER to unlock panel Menu will be displayed on the screen each menu has it own sub menu Each menu has specific function Please refer to Operation Menu for details Press button UF or DOWNI if you want to browse or change through the various Setup Options Press button ENTER to save your settings or enter the next menu Press button or DOWN to change values Add or subtract Press button _ it will return to the upper menu one by one E SET THE DMX START ADDRESS SS Each projector must be given a DMxX start address so that the correct projector responds to the correct control signals This DMX start address is the channel number from which the projector starts to listen to the digital control information being sent out from the controller The fixture have 3 DMX modes There are simple mode standard mode and extended mode For example standard mode has 18 channels so set the No 1 projector s address 001 No 2 projector s address 019 No projector s address 037 No 4 projector s address 055 and so on Launch the projector Press button ENTER more than 5 seconds to unlock panel Press button ENTER to display DMX address Press button UR or DOWN you can set the address Press button ENTER to confirm which means the projector has saved the Start Address automatically when powered on next time it will display the value saved last time Press button 09 or DOWN to change values Ad
13. ff Disable LED Stage Light Delay Off Enable LED Stage Light Display Invert OFF LED Stage Light Display Invert ON LED Stage Light LED Stage Light Display Setup Language Language English LED Stage Light Language fa PAS LED Stage Light LED Stage Light Option Lost DMX Lost DMX Clear Value LED Stage Light Lost DMX Hold Value LED Stage Light LED Stage Light LED Stage Light Access Code Code 008 Advanced Access Code Code 000 LED Stage Light LED Stage Light LED Stage Light Adjust Adjust Adjust Pan 000 LED Stage Light LED Stage Light Adjust Adjust Tilt Tilt 000 LED Stage Light LED Stage Light Adjust Adjust Red Red 000 LED Stage Light LED Stage Light Adjust Adjust Green Green 000 LED Stage Light LED Stage Light Adjust Adjust Blue Blue 000 LED Stage Light LED Stage Light Adjust Adjust White White 000 Level 1 Level 2 Level Level 4 LED Stage Light Adjust Fixed Gobo Wheel LED Stage Light Adjust Fixed Gobo 000 LED Stage Light Adjust Rot Gobo Wheel LED Stage Light LED Stage Light Adjust Rot Gobo 000 LED Stage Light Adjust Adjust Prism Prism 000 LED Stage Light LED Stage Light Adjust Adjust Focus Focus 000 LED Stage Light Information LED Stage Light Temperature LED Stage Light Fixture Hours LED Stage Light Temperature 025C LED Stage Light Fixture Hours 0000
14. us Make sure that the power cord is never crimped or damaged by sharp edges Never let the power cord come into contact with other cables Only handle the power cord by the plug Never pull out the plug by tugging the power cord Keep a projector s optical system clean Do not touch LED lens with bare hands The projector should always be installed with a secondary safety fixing A safety cord is supplied for this it should be attached as shown in installing the projector section Shields and lens shall be changed if they have become visibly damaged to such an extent than their effectiveness is impaired for example by cracks or deep scratches LED lamps should be replaced if damaged or having reached life limit D O Exterior surface temperatures of the luminaire after 5 minutes operation is 55 C when steady state is achieved 70 C There is no user serviceable poarts inside the projector do not open the housing and never operate the projector with the covers removed If you have any questions don t hesitate to consult your dealer or manufacturer Rotation Gobo Wheel 140 149 Gobo 7 Shak From Slow To Fast 150 202 Forward Rotation Effect From Fast To Slow 203 255 Forward Rotation Effect From Slow To Fast 14 20 Gobo Rotation Prism Insertion 0 127 Gobo Index Gobo Forward Rotation From Fast To Slow Stop Rotation Gobo Reverse Rotation From Slow To Fast Prism Excluded
Download Pdf Manuals
Related Search