USER MANUAL ET8C1E
Contents
1. Jed Pe Press this key to pop up the main menu EEE indicator To show the working status of the DVR REC is recording indicator POWER is power indicator ALARM is alarm indicator Direction split confirm Keys In menu mode select the listed options upward downward leftward rightward In TZ control the dome to upward downward rotate leftward rightward Enter key confirms the selection and operation In live mode upward and downward is for split key nine split key and sixteen split key In playback mode leftward and rightward is sed for rewind and forward PS BSC Press it to exit from the inferior menu and return to the superior menu USB 2 0 port Connected to disk and used for system software upgrade or video file backup Insert the disk after turning off the DVR Better not connect the mouse here or it would be abnormal IR receiver Receive signal from remote control Digital Video Recorder User manual 2 2 Hard Disk Installation Before you use the DVR for the first time the HDD should be installed in M r units of HDD can be installed according to the model of DVR ch em K a Take off the cover Open the DVR Fix the HDD by Cover the housing Fix the housing housing screen connect the data Description of rear panel Rear panel of 4 channel H 264 DVR Digital Video Recorder User manual Description Standard BNC port connected with the Camera Name Video input V2. Focus click Button to adjust the focus of the camera Iris click Button to adjust the iris of the camera Direction control Control the PTZ rotation 8 directions control is supportive 4 directions in front panel is supportive High speed PTZ Full screen shows channel image left press mouse and control PTZ to rotate then rotate the mouse to adjust the zoom multiple of the camera Setup Enter the function operation menu Window switch Switch between different windows Special Function 1 Preset Set a location for the preset calls the preset points PTZ automatically turns to the set position 1 Preset option Set a location for the preset procedure is as follows 16 Digital Video Recorder User manual Step 1 In picture 3 10 clicking the direction buttons will turn into preset position click the set button to enter Picture 3 11 Step 2 Click the Preset button then write the preset points in the input box Step 3 Click Set button return to the picture 3 10 Complete setup that is the preset points and preset position corresponds to the values entered DEL Preset After entering preset points click Del Preset button to remove the preset 2 Preset point calls In picture 3 10 click Page switch button enter PTZ control interface as shown in picture 3 12 In the input blank write the preset point number then click Breser button PTZ turns to the corresponding preset point 2 Tour betw
3. ype Normal Enable Period SETT interval Alarm Qutput MH Delay Record Channel Tour Snapshot EE Delay Message Send Emai FTP upload KA IG Men deet CC mm Picture 4 10 alarm input Picture 4 11 Abnormality 28 Digital Video Recorder User manual 4 3 3 Video Loss When the equipment cannot obtain the channel video signal the video loss alarm is turned on and the linkage function is turned on Set method refer to chapter 4 3 1 4 3 4 Alarm input When the equipment obtains the external alarm signal the alarm function is turned on Set method refer to chapter 4 3 1 4 3 5 Alarm output Refer to chapter 3 5 4 4 3 6 Abnormality Analyzing and inspecting current software and hardware of the device When some abnormal events happen the device will make a relative answer such as show message and buzzer Event type Selecting abnormity you want to inspect Enable Select it to make sure abnormal function workable Show message Automatically alarm cue dialog box come out of the main screen Buzzer The buzzer rings when alarm occurs 4 4 System setup Set the system parameters such as general setup code setup network setup network service output mode PTZ control serial port setup and alternate patrol setup 4 4 1 General setup System time Set system data and time Data format Choose the data format YMD MDY DMY 29 Digital Video Recorder User manual Date separator Choose list separator of
4. be installed in the PC T Main Menu gt System gt Netservice Net Server Net Server Info 0 0 NTP 10 0 Your SMTP S EMAIL IP FILTER DDNS FTP 000 DDNS Set Invalid 0 FTP larsp 1 xmsecu com 15000 Oo jAlarmServer Wireless Config D Mobile Monitor 1 34599 UPNP 0 wifi 0 AP350 IRTSP 0 554 Picture4 17networkservice Picture4 18PPPOE setup 32 Digital Video Recorder User manual p EMAIL wm IP FILTER NTP EEE TEGE GE Enable ea Enable SMTP Server Your SMTP Server Restricted T Port 25 i Need SSL 0 Banned IP User Name Enable Password Sender Receiver Title Alarm Message ORT Cancer Picture 4 19 NTP setup Picture 4 20 EMAIL setup Picture 4 21 IP purview setup Host computer IP Input the IP address installed NTP server Port Default 123 You can set the port according to NTP server Time zone London GMT 0 Berlin GMT 1 Cairo GMT 2 Moscow GMT 3 New Delhi GMT 5 Bangkok GMT 7 Hong Kong Beijing GMT 8 Tokyo GMT 9 Sydney GMT 10 Hawaii GMT 10 Alaska GMT 9 Pacific time GMT 8 American mountain time GMT 7 American mid time GMT 6 American eastern time GMT 5 Atlantic time GMT 4 Brazil GMT 3 Atlantic mid time GMT 2 Update cycle The same with the NTP server check interval Default 10 minutes Theme You can set as you wish DDNS It is the abbreviation of dynamic domain name server Local domain name Provide the domain name registered by DDNS User name Provide the ac
5. protection If the password is continuous wrong three times the alarm will start If the password is continuous wrong five times the account will be locked The account can be unlocked through reboot or after half an hour the account will be unlocked automatically User Name Password Please Login Picture 3 1 Login 3 4 Preview You can right click mouse to choose to switch between the windows The system date time and channel name are shown in each viewing window The surveillance video and the alarm status are shown in each window 3 5 Desktop shortcut menu In preview mode you can right click mouse to get a desktop shortcut menu The menu includes main menu video playback video control alarm output PTZ control color setup TV adjust shut down system window switch 3 5 1 Main menu When you login the system main menu is shown as below 12 Digital Video Recorder User manual 20 l 2 Type Remain Tota 1 sde USB DISK 1 91 GB 1 92 GB 2 GmmebikO MMC DISK 3 72 GB 3 73 GB Required Remaining 0 00 KB 1 91 GB Backup format H264 7 Picture 3 2 Main menu Picture 3 3 video playback Picture 3 4 detect the storage Picture 3 5 Recording backup 3 5 2 Video playback There are two methods for you to play the video files in the hard disk 1 Inthe desktop shortcut menu 2 Main menu gt video recording gt video playback Note The hard disk that saves the video files must be set as read write or read onl
6. sheet for more information Button Function Button Function fa NW Play pause ow Backward T Stop Q Volume Slow play Fast play N h I st EE Previous frame i i 1 Next frame P Previous file PI Next file Repeat playback is d Full screen Digital Video Recorder User manual Operation hint Displays the function of the cursor place NOTE Frame by frame playback is only performed in the pause playback mode Special Functions Accurate playback Input time H M S in the time column and then click Play The system can operate accurate playback according to the searching time Local zoom When the system is in single window full screen playback mode you can drag your mouse in the screen to select a section and then left click mouse to realize local zoom You can right click mouse to exit 3 5 3 Record Mode Please check current channel status o means it is not in recording status e means it is in recording status You can use desktop shortcut menu or click main menu gt recording set to enter the recording control interface Schedule Record according to the configuration Manual Click the All button and the corresponding channel starts recording no matter the channel in any state Stop Click the Stop button and the corresponding channel stops recording no matter the channel in any state 3 5 4 Alarm output S PTZ Config Main Menu gt Al
7. state The ninth window displays the code stream information in the nine window preview status transparency m Choose the background image transparency The range is 128 255 resolution m set display resolution channel m Choose the set code output channel number 34 Digital Video Recorder User manual cover area m means the selective state Click the cover area button and enter the corresponding channel window You can cover the arbitrary using mouse 4 4 6 PTZ setup Channel Choose the dome camera input channel Protocol Choose the corresponding dome protocol PELCOD as an example Address Set as the corresponding dome address Default 1 Note The address must be consistent with the dome address Baud rate Choose the corresponding dome baud rate length You can control the PTZ and vidicion Default 115200 Date bit Include 5 8 options Default 8 Stop bit Include 2 options Default 1 Parity Include odd check even check sign check blank check Default void 4 4 7 Serial port setup 112131415161718 112 pe Picture 4 25 PTZ setup Picture 4 26 Serial Port Setup Picture 4 27 Tour Setup Serial port function Common serial port is used to debug and update program or set up specific serial port Baud rate Choose the corresponding baud rate length Data bit Include 5 8 options Stop bit Include 2 options 35 Digital Video Recorder User manual Parity Include odd check even check
8. which needs to be upgraded 4 6 System information 4 6 1 Hard disk information Display the hard disk state hard disk type overall capability residual capability the recording time and so on Clue Means that the hard disk is normal X means that the hard disk is broken down means that there is no hard disk If the user needs to change the damaged hard disk you must shut down the DVR and take up all the damaged hard disks then install a new one behind serial number means the current working disk such as 1 If the corresponding disk is damaged the information will display 4 6 2 Code stream statistics Display the code stream Kb s and hard disk capability MB s in real time It displays as the wave sketch map 4 6 3 Log information Look up system log according to the set mode 39 Digital Video Recorder User manual Log information include System operation configuration operation data management alarm affair recording operation user management file management and so on Set the time section to look up and click the look up button The log information will display as a list one page is 128 items Press Page up or Page down button to look up and press delete button to clear all the log information OD Main Menu gt CR Mam Menu gt info All R d Channel 8 a 2012 03 29 00 00 00 xtra Channel 2012 03 30 00 00 00 Alarm in Time Type Alarm Output Log in User default Log Log Out User defaul
9. 5 255 0 Default gateway Set the default gateway Default 192 168 1 1 DNS setup Domain name server it translates the domain name into IP address The IP address is offered by network provider The address must be set and reboot then it works TCP port Default 34567 31 Digital Video Recorder User manual HTTP port Default 80 HS download The high speed download option can be enabled Transfer policy There are three policies Adaptive quality preferred and fluency preferred The code stream will adjust according to the setup Adaptive policy is the trade off between quality preferred and fluency preferred policies Fluency preferred and adaptive policies are valid only when the assistant code stream is turned on Otherwise quality preferred is valid 4 4 4 Network service Choose the network service option and click the set button to configure the advanced network functions or double click the service button to configure the parameters PPPOE setup Input the user name and password that ISP Internet service provider provides After saving it reboot up your system Then the DVR will build a network connection based on PPPOE The IP address will change into dynamic IP address above operation is well done Operation After PPPOE dialing successfully look up the IP address in the IP address and obtain the current IP address Then use this IP address to visit the DVR through user port NTP setup The NTP server must
10. Digital Video Recorder User manual Grr evetraee ere USER MANUAL ET8C1E 8 channel CIF Digital Video Recorder H 264 Digital Video Recorder Gong SECURITY SOLUTIONS Digital Video Recorder User manual DVR User s Installation and Operation Manual Welcome Thank you for purchasing our DVR This manual is designed to be a reference tool for the installation and operation of your system Here you can find information about this series DVR features and functions as well as a detailed menu tree Before installation and operation please read the following safeguards and warnings carefully Important Safeguards and Warnings 1 Do not place heavy objects on DVR 2 Do not let any solid or liquid fall into or infiltrate the DVR 3 Please brush printed circuit boards PCB s connectors fans machine box and so on regularly 4 Before the dust cleaning please Switch OFF the power supply and unplug it 5 Do not disassemble or repair the DVR by yourself Do not replace the components by yourself Environment 1 Please place and use the DVR between 0 40 degree Celsius Avoid direct sunlight Stay away from heat source 2 Do not install the DVR in damp environment 3 Do not use the DVR in smoky and dusty environment 4 Please ensure that the DVR level installation is in a stable workplace 5 Please install in ventilated place Keep the vent clean 6 Use within the rating input and output scope Digital Video Recorder User m
11. E Query Log info 8 Clear Log 10 D System Update 11 G Auto Maintain 12 H General Config A3 Th Encode Contin Picture 4 32 add group Picture 4 33 Delete group 37 Digital Video Recorder User manual Delete user Delete the current user Choose the user and click delete user button Delete group Delete the current group Choose the group click the Delete group button 4 5 3 Online user Look up the network user information in the local DVR You can choose the network user and cut the connection Then the user is locked until next boot strap 4 5 4 TV adjust Refer to chapter 3 2 7 Main Menu gt Advanced gt Hestore S Main Menu gt Advanced gt AutoMaintain lease select setting entries that you want to default amp Main Menu gt Advanced gt Online User f O User Name Every Tuesday at 01 00 ALL Configuration Never Picture 4 34 Online user Picture 4 35 Auto maintenance Picture 4 6 Resume default 4 5 5Auto maintenance The user can set the auto reboot time and auto file deleting time limit 4 5 6 Resume default The system resumes from the default setup You can choose the items according to the menu 38 Digital Video Recorder User manual 4 5 7 Upgrade amp Main Menu gt Advanced gt Upgrade e XS Upgrade Position Upgrade file Picture 4 37 upgrade information Picture 4 38 hard disk statistics Picture 4 39 Code stream Upgrade Choose USB interface Upgrade file Choose the file
12. N E WASTE HANDLING AND MANAGEMENT Dear Customer The Ministry of Environment and Forests have published The E waste Management and Handling Rules 2010 which comes in effect from 1 May 2012 E waste is defined as any electrical or electronic component of products in whole or in part or rejects from their manufacturing or repair process which are intended to be discarded These rules apply to every producer consumer or bulk consumer involved in the manufacture sale purchase and processing of electrical and electronic equipment or components as specified in Schedule 1 please refer to our website www godrej com in the Good amp Green section of CSR module for more details Under these rules specific roles and responsibilities are defined for producers consumers and recyclers handling and managing E waste E waste is to be managed in an environmentally sound manner which means taking steps to ensure that health and environment are protected from adverse effects of hazardous substance contained in such wastes Rule 6 of the E waste Management and Handling Rules 2010 states that bulk consumers of electrical and electronic equipment shall be responsible for recycling of the e waste generated by them Bulk consumer means bulk users of electronic and electrical equipment such as Central Government or State Government Departments public sector undertakings banks educational institutions multinational organizations international agencies
13. anual Table of Contents BEER 6 Ea Te e 6 AEE GSE 6 2 Open package check and Cable connections 5 scssucccsnnnsscseswsnecwsneruansicevsaseesdanaedsddsnisussdauuusdasadssdauniadsdausddddasaudddaanusddannedsdaineisiasnniecanasiacnns 8 LAD e ee reegen KEE 8 2 2 Hard Disk RE EE 9 S BERROS Fea OU E 11 TANN 11 NNN 11 3 3 Login settee te ca suas a succes ace Sean v aac neces Prees Sros SPE tess Prees SPE ESSEE EOSS EEAS SEES suena en aaaenauaaacnann raseaauanacnanaiasaaaanaeianeniosnannune 12 NN 12 3 5 Desktop shortcut menu tact meee eee eerie 12 MIT 12 Fas BERT 21645 NM nN RE RSE RE ERE RE RRR NTE RECN RINT 13 DR COG e 15 IS Een OI OE 15 VPN 16 3 5 6 E 20 JE ETNE RE 20 NN 20 DV 20 RE TELM erratic ere eee eee ie hea ae a a a ee ea EE 21 4 1 Main menu navigation EEN 21 TN EE 23 4 2 1 Recording 2 ar A E 23 4 2 2 Video playback ENEE 25 Digital Video Recorder User manual SERT Oo JER iniit RE TEE A ENEE 25 TITT 26 43 V Motion DENN 26 DEN 28 TNS 29 24 Alarm LI EE 29 NNN 29 TN EE 29 TN 29 4 4 1 General EE 29 4 4 2 Encode spekk Akk ssor e essee ssor essseesseressseees 30 A S NEWOLK E osar ea e E EE E E UM ANUabLLcoeheeacnetneMncoeh canteen neoehAactetneacoeneAncaetnenceaennencaetnenceneneananed i 31 ANNEN 32 TOTEN HH 34 AAG POL Ze Dvs 35 Eer UNM ESSEN hm va ane E E E 35 TT To 36 EEG GE EE 36 4 5 1 EKN Ge GR 36 AST User GL Ee 37 ENN 38 EPEN AdU SE 38 EENEG 38 FN re Re enn Oe ee ee ene en ete ete E n Tre rere rrr e a 38 z
14. arm gt Alarm Output amp Function Preset Alarm Type 1 Interval Configuration e Pan 10 Tour Manua G Se Pattern Patrol No 0 Stop zg Border J Status WC Page Switch Picture 3 8 Alarm output Picture 3 9 PTZ Setup Picture 3 10 Preset Settings Picture 3 11 PTZ Control 15 Digital Video Recorder User manual DU o OG m Please check current channel status means it is not in alarming status e means it is in alarming status You can use desktop shortcut menu or click Main menu gt alarm output to enter the alarm output interface Configuration Alarm is on according to the configuration Manual Click the All button and the corresponding channel is alarming no matter the channel in any state Stop Click the Stop button and the corresponding channel stops alarming no matter the channel in any state 3 5 5 PTZ control Operation interface is as follows The functions include PTZ direction control step zoom focus iris setup operation tour between spots trial tour boundary scan assistant switch light switch level rotation and so on Note 1 Decoder A B line connects with DVR A B line The connection is right 2 Click main menu gt system configuration gt PTZ setup to set the PTZ parameters 3 The PTZ functions are decided by the PTZ protocols Step Set the PTZ rotation range Default range 1 8 Zoom click button to adjust the zoom multiple of the camera
15. at Standard H 264 30 Digital Video Recorder User manual Resolution Resolution type D1 CIF Frame rate P I Frame s 25 frames s Code stream control You can choose limited code stream or variable code stream When you choose the variable code stream there are six image quality options Code stream value Set the code stream value to modify the image quality The larger code stream value the better image quality Video Audio When the icons are all in reverse displayed the video file is video and audio multiplex stream Main Menu gt System gt Encode a Main Menu gt System gt Network Channel i Compression H 264 Extra Stream Resolution CIF 352x288 QCIF 176x147 Frame Rate FPS 25 12 7 Bit Rate Type VBR VBR Quality high low Bit Rate Kb S 1107 Frame Interval 2 Net Card Wire Netcar DHCP Enable IP Address 192 168 1 108 Subnet Mask 255 255 255 0 Gateway 192 1 1 Primary DNS 0 0 D D Secondary DNS 0 0 0 0 Media Port 34567 HTTP Port 80 HS Download Transfer Policy Quality Prete Video Audio Fn Cancel Picture 4 15 network setup Picture 4 16 code setup 4 4 3 Network setup Network card You can choose cable network card or wireless network card DHCP enable Obtain IP address automatically Note DHCP server is preinstalled IP address Set the subnet mask code Default 192 168 1 10 Subnet mask code Set the subnet mask code Default 255 25
16. click the pause button to stop the backup Cancel During backup you can exit the page layout to carry out other functions 4 3 Alarm Function Alarm functions include motion detect camera mask video loss alarm input and alarm output 4 3 1 Motion Detect When system detects the motion signal that reaches the set sensitivity the motion detect alarm is on and the linkage function is turned on A Main Menu gt Alarm gt Moation Detect f Channel 1 Enable Picture 4 4 motion detect Picture 4 5 set the area Channel number Choose the set motion detect channel Enable Means that the motions detect function is on Sensitivity Choose in the six options according to the sensitivity 26 Digital Video Recorder User manual Area Click setup and enter the set area The area is divided into PAL22X18 Green block means the current cursor area Yellow block means the dynamic detect defensive area Black block means the unfenced area You can set the area as followed Drag the mouse and dra w the area Period Trigger the motion detect signal in the set time section You can set according to week or set uniformly Each day is divided into four time sections Means the set valid Interval Only one alarm signal is turned on even there are several motion detect signals in the set interval Delay Delay a few moments and stop when the alarm state is turned off The range is 10 300 seconds Record channel Choose the recording chan
17. corresponding channel number to set the channel Choose the All option to set the entire channels Redundancy Choose the redundancy function option to implement the file double backup function Double backup is writing the video files in two hard disks When you do the double backup make sure there are two hard disks installed One is read write disk and the other is redundant disk refer to 4 5 1 Length Set the time length of each video file 60 minutes default value Pre Record Record maximum 30 seconds before the action time length is decided by the code stream Mode Set video state schedule manual or stop e Schedule Record according to the set video type regular detection and alarm and time section e Manual Click the button and the corresponding channel starts recording no matter the channel in any state e Stop Click the stop button and the corresponding channel stops recording no matter the channel in any state Time section Set the time section of common recording The recording will start only in the set range Recording type Set recording type regular detection or alarm e Regular Perform the regular recording in the set time section The video file type is R e Detection Trigger the motion detect camera mask or video loss signal When above alarm is set as opening recording the detection recording state is on The video file type is M 24 Digital Video Recorder User ma
18. count registered by DDNS Password Provide the password registered by DDNS When the DDNS is successfully configured and start you can connect the domain name in the IP address Note The DNS must be configured in the network setup 33 Digital Video Recorder User manual DONS DDNS Type CN99 Enable Domain Name fyour 3322 0r Mobile Monitor Enable Port 34599 Picture 4 22 DNS setup Picture 4 23 Mobile Monitor Setup Picture 4 24 Output Mode Mobile Monitor Setup To visit the device by mobile please make a router mapping of this port and use CMS to monitor and operate it by protocol Enable Select it to make sure abnormal function workable Port It s a port of mobile monitoring which you need to make a router mapping of if you want to visit it by mobile 4 4 5 GUI display Channel name m Click the channel name modify button and enter the channel name menu Modify the channel name The 16 Chinese characters and 25 letters are supportive Time title m means the selective state Display the system data and time in the surveillance window channel title means the selective state Display the system channel number in the surveillance window Recording status ln means the selective state Display the system recording status in the surveillance window alarm status m means the selective state Display the system alarm status in the surveillance window code stream information m means the selective
19. een Points Multiple preset points connected tour line call tour points the PTZ run around on the line 1 Tour between points settings Tour line is connected by multiple preset points setting procedure is as follows Step 1 In picture 3 10 the Direction key will turn PTZ to designated location click Set button to enter Picture 3 13 Step 2 Click Tour button then write proper values in the Preset box then click Add preset button and complete settings also can add or delete tour which has been set up Step 3 Repeat step 1 and step 2 until all the points in the preset designated tour is set Del Preset Please input preset value in the box click Del Preset button to remove the preset points Del Tour Input the number of tour line click Del Tour button to remove the tour lines set 2 The Calls of Tour between Points In picture 3 10 click Page Switch button enter PTZ control menu as shown in picture 3 12 Please input the number of tour in the box then click Tour amp PTZ begins to work on the tour line 17 Digital Video Recorder User manual SS BT Cont PTZ Config PI ontrol 06 in a Mn Direct Aux Ope Light 1 Cm Function Pattern Preset Tour Pattern Patrol No 1 Function Preset Tour Function Preset Interval Aux Num Ope Pattern JE Ea Bordet Border Open Close Cancel Picture 3 12 Tour between point settings Picture 3 13 Scan Setup Picture 3 14 Bounda
20. es at most for the following user and user group name the blank or behind the char string is invalid The middle blank is valid Legal char include letter number underline subtraction sign dot 2 There is no limit in the user and user group You can add or delete the user group according to user definition The factory setup include user admin You can set the group as you wish The user can appoint the purview in the group 3 The user management include group user The group and user name cannot be the same Each user only belongs to one group Modify user Modify the existing user attribute Modify group Modify the existing group attribute Modify password Modify the user password You can set 1 6 bit password The blank ahead or behind the char string is invalid The middle blank in the char string is valid Note The user who possesses the user control purview can modify his her own or other user password Once the group is chosen the user purview is the subclass of the group We recommend that the common user s purview is lower than the advanced user Add group Add user group and set the purview There are different criteria shut down the equipment real time surveillance playback recording setup video file backup and so on Add Group Delete Group Name Memo GROUP admin bs Name admin CH Memo administrator group 2 Channel Title 3 DB Schedule 4 Backup H 6 D Account 7 E Query System Info 8
21. ideo output Connected with the video input of the monitor Name Description VGA VGA video signal output port connected with a VGA port of a computer monitor Audio output Connected with earphone or cable speaker Connected to audio input device Audio input port RS485 it can connect PTZ or decoder and can Control PTZ via the panel mouse remote control 485 AB External alarm port and network Connected with alarm input and output USB port Connected to USB Pen drive or mouse and used for system software upgrade or video file backup NET RJ 45 network port connected to network cable and used for remote browse or control Power Power input is DC 12V 5A 16 Channel DVR Power input is 12 V 3A 4 8 channel DVR 10 Digital Video Recorder User manual 3 Basic operation 3 1 Turn on Plug the power supply and turn on the power supply switch Power supply indicator light indicates turning on of the video recorder After the startup you will hear a beep The default setting of video output is multiple window output mode If the startup time is within the video setting time the timing video recording function will start up automatically Then the corresponding channel is shining and the DVR is working normally Note 1 Make sure that the input voltage corresponds with the switch of the DVR power supply 2 Power supply demands 220V 10 50Hz 3 Suggest using the UPS to protect the power supply under a
22. le reasons are as followed e The hard disk power supply line is not connected 41 Digital Video Recorder User manual e The cables of the hard disk are damaged e The hard disk is damaged e The SATA port of main board is damaged There are no video outputs in single channel or multiple channels and all channels Possible reasons are as followed e The program is not matched Please update the program e The image brightness is all 0 Please resume the default setup e There is no video input signal or the signal is too weak e The channel protection or the screen protection is set e The hardware of the DVR is damaged Real time image problems such as the image color or the brightness distortion Possible reasons are as followed e When using the BNC output the option between the N mode or PAL mode is wrong and the image becomes black and white e The DVR is not matched the monitor impedance e The video transmission distance is too far or the loss of the video transmission line is too large e The color and brightness setting of the DVR is wrong I cannot find the video files in local playback mode Possible reasons are as followed e The data line of the hard disk is damaged e The hard disk is damaged e Update the different program with the origin program files e The recording is not on The local video is not clear 42 10 11 Digital Video Recorder User manual Possible reasons are as followed e The image qua
23. lity is too bad e the reading program is wrong Reboot up the DVR e The data line of the hard disk is damaged e The hard disk is damaged e The hardware of the DVR is damaged There is no audio signal in the surveillance window Possible reasons are as followed e tis not an active tone arm e tis not an active squad box e The audio lines are damaged e The hardware of the DVR is damaged There is audio signal in the surveillance window but no audio signal in the playback state Possible reasons are as followed e Settings the audio is not chosen e The according channel is not connected with the video The time is wrong Possible reasons are as followed e Setting is wrong e The battery is in bad connection or the voltage is too low e The oscillation is damaged The DVR cannot control the PTZ Possible reasons are as followed e There is something wrong with the frontal PTZ e The setting connection or the installation of the PTZ decoder is not correct 43 Digital Video Recorder User manual e The connections are not correct e The PTZ setting of the DVR is not correct e The protocols of the PTZ decoder and the DVR are not matched e The address of the PTZ decoder and the DVR are not matched e When multiple decoders are connected the far port of the PTZ decoder line A B must connect a 120 ohms resistance to reduce the reflection otherwise the PTZ control is not stable e The distance is too far 12 The motion detect is no
24. llowable conditions 3 2 Turn off There are two methods to turn off the DVR Entering main menu and choosing turn off in the turn off the system option is called soft switching Pressing the power supply switch is called hard switching Illumination e Auto resume after power failure If the DVR is shut down abnormally it can automatically backup video and resume previous working status after power failure e Replace the hard disk Before replacing the hard disk the power supply switch in the rear panel must be turned off e Replace the battery Before replacing the battery the setting information must be saved and the power supply switch in the real panel must be turned off The DVR uses button battery The system time must be checked regularly If the time is not correct you must replace the battery we recommend replacing the battery every year and using the same battery type Note The setting information must be saved before replacing the battery otherwise information will be lost 11 Digital Video Recorder User manual 3 3 Login When the DVR boots up the user must login and the system provides the corresponding functions with the user purview There are two user settings The names are admin and guest These names have no password Admin is the super user purview and Guest permissions are preview and video playback User admin and guest passwords can be revised while their permissions can t be revised Password
25. m channel linkage parameters depending time section alarm Video loss output screen hint recording PTZ tour Common Set system time data format language hard disk full time operation machine Configuration number video format output made summer time stay time Set main assistant coding parameter code mode resolving ability frame Code l rate code stream control image quality type code stream value frame Configuration between value video audio enable 21 Digital Video Recorder User manual System configuration Network Set basic network parameters DHCP and DNS parameters network high speed configuration download PPPOE NTP E Mail purview DDNS parameter System Configuration Set channel name purview hint icon state transparency cover area time title Output Mode channel time fold PTZ Set channel PTZ protocol address baud rate date bit stop bit configuration System configuration Serial port configuration Set serial port function baud rate date bit stop bit check Tour configuration Set tour mode and interval time Hard disk Set appointed hard disk as read write disc read only disc or redundant disc clear management data resume date and so on User Modify user group or password Add user or group Delete user or group management Break the connection with the already logged in user Lock the account after break Online user until booting up agai
26. machine and the hard disk are shared the same data lines e The data is too much Please stop recording and backup e The data exceeds the backup storage e The backup equipment is not compatible e The backup equipment is damaged 17 The keyboard cannot control the DVR Possible reasons are as followed e The serial port of the DVR is not set correctly e The address is not correct e When multiple transformers are connected the power supply is not large enough Please give each transformer individual power supply 45 18 19 20 21 22 Digital Video Recorder User manual e The distance is too far Alarm cannot be recessional Possible reasons are as followed e The setting of the alarm is not correct e The alarm output Is turned on manually e The input machine is damaged or the connections are not correct e There are some problems for specific program edition please update the program Alarm is not working Possible reasons are as followed e The setting of the alarm is not correct e The connection of the alarm is not correct e The alarm input signal is not correct e Analarm is connected with two loops synchronously The remote controller is not working Possible reasons are as followed e The remote control address is not correct e The remote control distance is too far or the angle is too large e The battery is used up e The remote controller or the front panel of the recording machine is damaged The st
27. n TV adjust Adjust TV upside downside nearside starboard distance 22 Digital Video Recorder User manual Automatic Set automatic reboot system and automatic deleting files Management tools maintenance Resume setup state common setup code setup recording setup alarm setup Restore network setup network service preview playback serial port setup user default management Hard disk Display hard disk capability and recording time information Code stream Display code stream information statistics System information Logs Clear all log information according to the log video and time Version Display edition information Shutdown Logout shut down or reboot 4 2 Recording function 4 2 1 Recording Configuration Set the recording parameters in the surveillance channel The system is set for 24 hours consecutive recording in the first startup You can enter Main menu gt Recording function gt Recording setup to set Note There is at least one read write hard disk refer to chapter 4 5 1 23 Digital Video Recorder User manual Main Menu gt Record gt Record Cont wem x Channel 1 p Redundancy SD Card Record Length 160 min PreRecord 5 Sec Mode Schedule Manual Stop Week p Regular Detect Alarm Period 1 00 00 24 00 Period 2 00 00 24 00 Period 3 00 00 24 00 Period 4 00 00 24 00 Picture 4 1 recording setup Channel Choose the
28. nel multiple options supportive Trigger the video signal when the alarm is turned on Note Set in the recording channel and perform the linkage recording Start detecting video files in the corresponding time section PTZ Activation Set the PTZ linkage when the alarm is turned on set x Thursday 7 00 00 24 00 PTZ Activation e 00 00 24 00 d 3 6 CAM 1 None CAM 2 None CAM 3 None CAM 5 None CAM 6 None CAM 7 None CAM 8 None Picture 4 6 set the time section Picture 4 7 PTZ Activation Note PTZ linkage is set in the shortcut menu gt PTZ control Set the tour between spots trail tour and so on Show message Pop the alarm information dialog box in the local host computer screen E Mail Means sending an E mail to user when the alarm is turned on Note Set in the network service and send an E Mail 27 Digital Video Recorder User manual 4 3 2 Video Blind When the video image is influenced by the environment such as bad brightness or reaching the set sensitivity parameter the camera mask function is turned on and the linkage is turned on Set method refer to chapter 4 3 1 OMaln Menu gt Alarm gt Video Blind Main Menu Alarm Video Loss Channel i sl Enable Channel i Enable Ke Cen elle et CC Picture 4 8 camera mask Picture 4 9 video loss OB Maln Menu gt Alern gt Alarm Input FT Malin Menu gt Alarm gt Abnormality Alarm In 1 Enable Event Type No Disk
29. nual e Alarm Trigger the external alarm signal in the set time section When above alarm is set as opening recording the detection recording state is on The video file type is A Note Refer to chapter 4 3 to set corresponding alarm function 4 2 2 Video playback Refer to chapter 3 5 2 4 2 3 Video backup You can back up the video files to external storage through setup Note The storage must be installed before the files backup If the backup is terminated the already existing backup can playback individually Main Menu gt Record gt Backup D Backup e x 2 0 Name Type Remain Tota De Detect Type 1 B sda USB DISK 1 96 GB 1 97 GB Channel I 2 B mmebik4 MMC DISK 1 82 GB 1 83 GB x Start Time l 12012 03 29 00 00 00 End Time 2012 03 29 14 05 52 O Channel File Name Required Remaining 0 00 KB 1 96 GB Backup format H264 Picture 4 2 detect the equipment Picture 4 3 file backup Detect Detect the storage connected with the DVR such as hard disk or universal disk Erase Choose the file to delete and click erasure to delete the file Stop Stop the backup 25 Digital Video Recorder User manual Backup Click backup button and the dialog box is popped up You can choose the backup file according to the type channel and time Remove Clear the file information Add Show the file information satisfying the set file attributes Start Pause Click the play button to start the backup and
30. o change or renewal without notice Unless allowed in the Copyright Lam it is prohibited to reprint adoptor translate the content hereof without prior witten pemisssion All functions of full edition model are described in this Manual Half edition model is only equipped with some of its functions 52
31. orage time is not enough Possible reasons are as followed e Front vidicon quality is bad The lens is too dirty The vidicon is in backlighting installation e The hard disk capability is not enough e The hard disk is damaged The downloading file cannot play 46 Digital Video Recorder User manual Possible reasons area as followed e There is no media player e There is no DX8 1 software or higher edition e There is no DivX 503 bundle exe file to play AVI video files e The DivX503bundle exe and ffdshow 20041012 exe files must be installed in the windows XP system 23 I cannot remember the advanced code or network in the local menu operation Please contact the local service or call the HQ service We will offer the service according the machine type and the program 47 Digital Video Recorder User manual 5 2 Maintenance Please brush printed circuit boards connectors fans machine box and so on regularly Please keep the grounding well done to prevent the video or audio signal interfered and the DVR from static or inductive electricity Do not pull out the video signal line or RS 232 port with the power on Do not use the TV in the local video output port VOUT of DVR It will damage the video output circuit easily SH JE NR Do not turn off the switch directly please use the turn off function in the menu or press the turn off button in the panel 3 seconds or longer to protect the hard disk Se Please keep the DVR awa
32. private companies that are registered under the Factories act 1948 and Companies act 1956 The bulk consumers have to ensure that the e waste generated by them is channelized to authorized collection centers or is taken back by the producers They shall maintain records of E waste generated by them in Form 2 and make such records available for scrutiny by the State pollution control or the Pollution control Committee concerned All consumers of electrical and electronic equipment irrespective of their status as bulk consumers or not shall ensure that E waste generated by them is channelized to authorized collection center s or registered dismantler s or recycler s or is returned to the pick up take back services provided by the producers Please refer to our website www godrej com in the Good amp Green section of CSR module for more details All our products intended to be recycled under the category of E waste as defined above carry a label or stamp of the WEEE symbol A wheelie bin with a cross which states that it falls under the hazardous waste category and is not to be disposed along with normal garbage We seek your support in ensuring environmentally sound management of E waste and aid us in sustaining our earth s natural resources and maintaining the earth s green cover intact for the benefit of our future generations 51 Digital Video Recorder User manual ADVICES Design and description of this product are subject t
33. ry Scan Setup Picture 3 15 Auxiliary Function 3 Pattern PTZ also can work on the preset scan line repeatedly 1 Pattern setup Step 1 In picture 3 10 click Set button enter picture 3 14 Step 2 Click Pattern button then enter proper values in the scan box Step 3 Click Begin button enter picture 3 10 here you can set the following terms Zoom Focus Iris Direction and soon click Set button to go back picture 3 14 Step 4 Click End button to complete setup Click right button of the mouse to exit 2 Pattern Calls In picture 3 10 click Page Switch button then enter PTZ control menu as shown in picture 3 12 Please enter the number of the scan in the value box then click AutoScan button PTZ begins to work on the scan line 4 Border Scan 1 Boundary Scan Setup Step 1 In picture 3 10 click Direction button to turn the PTZ to preset direction then click Set button to enter Picture 3 15 select Border button then left and return to picture 3 10 18 Digital Video Recorder User manual Step 2 Please click direction arrows to adjust PTZ direction click Set button to enter Picture 3 15 Select Border then right and return to picture 3 10 Step 3 You have thus completed the setup of position of left and right boundary 5 Horizontal Rotating Click Horizontally rotating button PTZ begins to rotate horizontally relative to original position of the camera Click Stop button to stop Outp
34. s Wes WW EE 39 EE EE 39 ee Re tee Ee EES 39 Digital Video Recorder User manual SEET 39 FN 39 4 6 4 Edition information siuccsceccesecceccesnceccessececcereescepeneieeeeneqccietntea data kda nid taaaiaiawniatd natant nett 40 TT 40 MEAN OAM ANN 41 VE OD 41 Mori 48 Appendix 1 Remote controller operation lt cccucsnscenicecasedticcesad ts rameanemmaneweenannenesmaneueenanuensmmaneneenenuenemmanenaanancunssaneneanencunenunueneenaneucenuouenemnaneuee 49 Appendix MN 50 Digital Video Recorder User manual 1 Product Introduction 1 1 Product overview The series DVR is designed especially for security and defense field which is outstanding Digital Surveillance product It introduces embedded LINUX operating system which is more stable It introduces standard H 264 video compression format and G 711A audio compressed format which ensures the high quality image low error coding ratio and single frame playing It introduces TCP IP network technology which achieves the strong network communication ability and telecommunication ability The series DVR can be used individually or online applied as a part of a safety surveillance network With the professional network video surveillance software it achieves the strong network communication ability and telecommunication ability The series DVR can be applied in the bank telecom electric power system judicial system factory storehouse water conservancy and so on 1 2 Main functions Real time sur
35. sign check blank check 4 4 8 Tour setup Set the tour display Means that the tour mode is turned on You can choose the single window four windows nine windows si xteen windows tour display or single display Interval Set the tour switch interval The set range is 5 120 seconds Note ol means turn off on the tour 4 5 Management tools 4 5 1 Hard disk management Configure and manage the hard disk The menu displays current hard disk information hard disk number input port type status and overall capability The operation include setup the write read disk read only disk redundant disk hard disk format resume default Choose the hard disk and click the right function button to execute Note write read disk The equipment can write or read data Read only disk The equipment can read data but cannot write data Redundant disk Double backup the video files in the write read disk Modify Pwd ype Status User Name admin KSE TENT A EE gei ae Read Write Norma Fetten ue een dh oadWrito Normal nab 2 O guest user Normal Old U GROUP admin New 3 37 10 Authority D Shutdown the device Confirm F Channel Title 3 B Schedule B Backup 5 HOD Management 6 IB PTZ Control Picture4 28 hard disk management Picture 4 29 user management Picture 4 30 modify password Picture 4 31 add user 36 Digital Video Recorder User manual 4 5 2 User management Manage the user purview Note 1 The char length is 8 byt
36. t Logi Log in User admin Logir Log in User admin Leo i ir Build Date 12 03 15 16 43 41 SerialNo 000043013992 Status D Time e Configuration Configuration Shut Down Picture 4 40 log information Picture 4 41 edition information 4 6 4 Edition information Display the basic information such as hardware information software edition issue data and so on 4 7 Shut down system Refer to chapter 3 5 8 40 Digital Video Recorder User manual 5 FAQs and Maintenance 5 1 FAQs If the problems are not listed please contact the local service or call the HQ service We are willing to offer the service 1 The DVR cannot boot up normally Possible reasons are as followed e The power supply is not correct e Switch power supply line is not in good connection e Switch power supply is damaged e The program uploading is wrong e The hard disk is damaged or the hard disk lines are broken e The front panel is damaged e The main board of the DVR is damaged 2 The DVR reboots automatically or stops working after boot up a few minutes Possible reasons are as followed e The input voltage is not stable or too low e The hard disk is damaged or the hard disk lines are broken e The power of the switch power supply is low e Frontal video signal is not stable e Bad heat radiator or too much dust or bad running circumstances for the DVR e The SATA port of main board is damaged 3 System cannot detect hard disk Possib
37. t working Possible reasons are as followed e The time range set is not correct e The motion detect area set is not correct e The sensitivity is too low e Limited by some hardware edition 13 I cannot login via web Possible reasons are as followed e The system is Windows 98 or windows me We recommend updating to Windows 2000sp4 or higher edition or installing the software for low edition e ActiveX is hold back e The edition is not exceeded dx8 1 Update the display card driver e Network connection failure e Network setting issues e Invalid password or user name e The user edition is not matched the DVR program edition 14 The image is not clear or there is no image in network preview state or video file playback state Possible reasons are as followed 44 Digital Video Recorder User manual e Network is not stable e The user machine is resource limited e The region shelter or channel protection is set e Choose the play in team mode in the network setup of DVR e The user has no surveillance purview e The real time image of the hard disk recording machine itself is not clear 15 Network connection is not stable Possible reasons are as followed e Network is not stable e IP address is conflicted e MAC address is conflicted e The network card of the computer or the hard disk recording machine is bad 16 There is something wrong with the USB backup or writing a CD Possible reasons are as followed e The rewritable
38. the data format Man Menu gt Systom gt General DST a e 1 LR System Time 201 3 29 14 11 12 YYYYMMC METER gt Enable Day of Week Date Start M2012 01 01 01 01 End 2012 01 01 01 01 24 4OUR Enable ENGUSH I7 Day of Week O Date Overwrite 5 Start Jan 7 st Mon 7 01 01 Vi Standard PA R olot o an End Jan T fst 17 Monl 01 01 0 OR Cane Picture 4 12 regular setup Picture 4 13 week setup Picture 4 14 date setup Time format Choose time format 24 hour or 12 hour Language English or Chinese Hard disk full e Choose stop Stop recording when the hard disk is full e Choose cover Cover the earliest recording files and continue recording when the hard disk is full DVR Number Only when the address button in the remote controller and the corresponding DVR number is matched the remote operation valid Video format PAL or NTSC 4 4 2 Encode setup Set the video audio code parameter video file remote monitoring and so on Set every independent channel s coding parameter in the left part and set the combination coding parameter in the right port Note Combination coding introduces video compression technique which combines and compresses multi channel s video to a special channel Its main using multi channel playback simultaneously DUN multi channel real time surveillance mobile surveillance and so on Channel Choose the channel number Code form
39. tput area parameters You can use the desktop shortcut menu or enter main menu management tools gt TV adjust 3 5 8 Logout Logout shut down the system or reboot up You can use the desktop shortcut menu or enter main menu logout Quit the menu Offer password next time you want to login shut down Quit the password Turn off the power supply When press the shutdown button there is schedule hint After three seconds the system is shut down Cancel midway is of no effect reboot Quit the system Reboot up the system 3 5 9 Window switch Preview in single window four windows eight windows nine windows according to the choice 20 4 Main Menu 4 1 Main menu navigation Digital Video Recorder User manual Main Menu Sub Menu Function Setup Set the recording configuration recording type recording time section Recording Playback Set recording look up recording play video file storage Backup Detect or format backup equipment back the selective files l l Set motion detect alarm channel sensitivity area linkage parameters defending Motion detection time section alarm output screen hint recording PTZ tour Set camera mask alarm channel sensitivity linkage parameters defending time Video Blind section alarm output screen hint recording PTZ tour Abnormality Set alarm message or buzzer for abnormal events such as IP address conflict or full HDD Alarm l Set video loss alar
40. ut Adjust Top Deflate Bottom Deflate Left Deflate PTZ Control 07 x S Right Deflate Black vertical Color Setting 05 Black horizonta 50 50 50 50 50 50 50 50 0 0 8 8 Reboot 8 8 Picture 3 16 PTZ menu settings Picture 3 17 Image colour Picture 3 18 TV adjust Picture 3 19 shut down the system 6 Rotate Click on the Horizontal rotating button PTZ turns around 7 Reset PTZ restart all the data clears to 0 8 Page Switch In picture 3 12 click Page Switch button to enter into picture 3 16 setting auxiliary function Enter Auxiliary number corresponding to auxiliary switch on the decoder 19 Digital Video Recorder User manual Auxiliary Number The operation of corresponding auxiliary switch according to PTZ agreement Page Switch In picture 3 16 click Page Switch button to enter the Picture 3 17 PTZ Main Menu the menu itself can be controlled by the Menu control buttons Enter Menu Enter PTZ menu Exit Menu Exit PTZ menu Direction Button The function buttons to choose PTZ menu Confirm Cancel To choose PTZ menu 3 5 6 Color Settings Set the selective image parameters current channel for single window display and cursor place for multi window display You can use the desktop shortcut menu and enter the interface The image parameters include tonality brightness contrast saturation You can set different parameters at different time sections 3 5 7 TV adjust Adjust TV ou
41. veillance e Analog interface and VGA interface VGA interface is equipped selectively e Surveillance function through monitor or display Storage e Special storage format which ensures the data safety Compression e Real time compression which ensures the audio and video signal stable synchronization Backup e Through SATA interface and USB interface such as USB equipment removable hard disk and so on e Through net download the files in the hard disk Playback e Individual real time video recording as well as searching playback network surveillance recording check downloading and so on e Multi Playback mode zooms at arbitrary region Net operating Digital Video Recorder User manual e Through net tele surveillance in the real time e Tele PTZ control e Tele recording and real time playback Alarm linkage e Multi route relay output which is convenient for the alarm linkage and light control and the sort e Protecting circuits at the alarm input and output interface which protects the main machine from damage Communication interface e RS485 interface which fulfills the PTZ control e Standard Ethernet network interface which fulfills the telecommunication function Intelligent operating e Mouse action function e Fast copy and paste operating for the same setting Digital Video Recorder User manual 2 Open package check and cable connections H 264 Digital Video Recorder 2 1 Description of front panel
42. y from heat resource 7 Please keep the DVR ventilated for better heat radiator Please check the system and maintain regularly 48 Digital Video Recorder User manual Appendix 1 Remote controller operation 2 Serial number Name Function 1 Multi window button Same function as Multi window button in the front panel 2 Numeric button Code input number input channel switch 3 Esc Same function as Esc button in the front panel 4 Direction button Same function as direction button in the front panel 5 Record control Control the record 6 Record mode Same function as Record mode 7 ADD Input the number of DVR to control it 8 FN Assistant function 49 Digital Video Recorder User manual Appendix 2 Mouse Operation Take right hand as an example The mouse in USB connection is supportive Operation Function Double click one item in the file list to pla Add or subtract number in the number settin video Press middle Double click the playback video to zoom 11 Switch the items in the combo box screen Double left click Double click the channel to make it full so Page up or down in the list Double click again to resume the multi wi love mouse Choose the widget or move the item display In the widget bh click Choose the eS function in the menu rag mouse Ee the motion detect area minn click Pop short cut menu in preview stat 50 Digital Video Recorder User manual INFORMATION O
43. y state Listed files Look up the listed files that accord with the searching criteria File information Look up the found file information File backup Backup the chosen file Click the button and operate as followed Note The storage must be installed before the file backup If the backup is terminated the already existing backup can playback individually Detect Detect the storage connected with the DVR such as hard disk or universal disk Erase Choose the file to delete and click Erase to delete the file Stop Stop the backup Backup Click Backup button and the dialog box is popped up You can choose the backup file according to type channel and time Remove Clear the file information Add Show the file information satisfying the set file attributes Start Pause Click the Play button to start the backup and click the Pause button to stop the backup 13 Digital Video Recorder User manual Cancel During backup you can exit the page layout to carry out their functions File searching Search the file according to the searching parameter File Type Channel Start Time uRecord Mode Mode All 1 3 789 101112131415161718192021 222324 2 456 Schedule 00000680 End Time Manual Stop Picture 3 6 File searching Picture 3 7 Recording Control Interface File type Set the searching file type Channel Set the searching channel Start Time Set the searching time scan Playback control Refer to the following
Download Pdf Manuals
Related Search