Dynacoat Clear 1000
Contents
1. Description Mixing ratio Mixing stick Equipment Application Flash off Drying Protection 05 05 2014 Dynacoat Clear 1000 D1 05 11 Clear 1000 is a multi purpose 2K clearcoat system delivering good results at OEM finish quality suitable for all types of repairs and application conditions Different hardeners and thinners can be used to adjust the product to the respective refinishing jobs The Clear 1000 combines an excellent appearance with very fast drying times and good polishability 2 Dynacoat Clear 1000 1 Dynacoat Hardeners 10 Dynacoat Thinners Use Dynacoat measuring stick No 1 Spray gun set up Application pressure 1 2 1 4 mm 2 0 4 0 bar See user manual spraygun used 2X 1 coat First apply a flowing closed coat Followed by a full flowingcoat after indicated flash off time A ASS Between coats Before curing 5 10 minutes at 20 C 10 15 minutes at 20 C Dynacoat Hardener Fast 20 C 60 C 6 hours 20 minutes Use suitable respiratory protection AkzoNobel Car Refinishes recommends the use of a fresh air supply respirator Read complete technical data sheet for detailed product information se AkzoNobel 1 3 Description Product and additives Hardeners Thinners Suitable substrates Mixing Clear 1000 is a multi purpose 2K clearcoat system delivering good results at OEM finish quality suitable for all types of repairs and application conditions2. 2 coats 50 60 um Theoretical coverage Ready for use mixture at 1 micron layerthickness 321 m liter The practical coverage depends on many factors i e shape of the object roughness of the surface application method and application circumstances Cleaning of equipment Use Guncleaner or nitrocellulose thinner Product storage Product shelf life is determined when products are stored unopened at 20 C Avoid extreme temperature fluctuation Shelflife 4 years at 20 C VOC The VOC content of this product in ready to use form is 626 g liter RTS mixture AkzoNobel Car Refinish bv Address Rijksstraatweg 31 PO Box 3 2170 BA Sassenheim Tel 31 0 71308 6944 FOR PROFESSIONAL USE ONLY IMPORTANT NOTE The information in this data sheet is not intended to be exhaustive and is based on the present state of our knowledge and on current laws any person using the product for any purpose other than that specifically recommended in the technical data sheet without first obtaining written confirmation from us as to the suitability of the product for the intended purpose does so at his own risk It is always the responsibility of the user to take all necessary steps to fulfill the demands set out in the local rules and legislation Always read the Material Data Sheet and the Technical Data Sheet for this product if available All advice we give or any statement made about the product by us whether in this data sheet or otherwise is correct to th
3. Different hardeners and thinners can be used to adjust the product to the respective refinishing jobs The Clear 1000 combines an excellent appearance with very fast drying times and good polishability Dynacoat Clear 1000 Dynacoat Hardener Fast Dynacoat Hardener Medium Dynacoat Hardener Slow Dynacoat Thinner Fast Dynacoat Thinner Medium Dynacoat Thinner Slow Dynacoat Clear 8000 Thinner Slow Dynacoat Thinner Clear Slow Solvent borne Basecoat OEM Finishes and hard dry topcoats 2 Dynacoat Clear 1000 1 Dynacoat Hardeners 10 Dynacoat Thinners Use measuring stick No 1 Spray gun set up and application pressure Application Pot life 05 05 2014 Gravity feed 1 2 1 4 mm 2 4 bar See user manual spraygun used Apply a flowing closed coat allowing for a 5 10 minutes flash off time at 20 C depends on hardener thinner combination used Next apply a full flowing coat allowing for a 10 15 minutes flash off time at 20 C before bake This time can be greatly influenced by the conditions at the time of application All Dynacoat Hardeners 2 3 hours at 20 C se AkzoNobel 2 3 Drying times 20 C 60 C Dry to Handle 6 8hrs 20 30 min Drying times depends on Hardener used Infra Red Dry to handle after 4 minutes low power 6 minutes high power Polishability Ready to polish minimum 1 hour after cooling down to ambient temperature Film thickness Per coat 25 30 um Recommended application
4. e best of our knowledge but we have no control over the quality or the condition of the substrate or the many factors affecting the use and application of the product Therefore unless we specifically agree in writing otherwise we do not accept any liability whatsoever for the performance of the product or for any loss or damage arising out of the use of the product All products supplied and technical advices given are subject to our standard terms and conditions of sale You should request a copy of this document and review it carefully The information contained in this data sheet is subject to modification from time to time in the light of experience and our policy of continuous development It is the user s responsibility to verify that this data sheet is current prior to using the product Coatings brand names mentioned in this data sheet are trademarks of or are licensed to AkzoNobel Head Office AkzoNobel Car Refinishes B V PO Box 3 2170 BA Sassenheim The Netherlands www dynacoatcr com AkzoNobel 05 05 2014 3 3
Download Pdf Manuals
Related Search