U s e r M a n u a l
Contents
1. Press the end of MicroSD card until it clicks out from the slot Pull out the MicroSD card MicroSD card Do not apply excessive force on the MicroSD card or attempt to insert it in the wrong direction as it may cause damage to the MicroSD card and the card slot Cautions OThe MicroSD card should be tested for errors on a regular basis and as the memory card is a consumable item it should be replaced periodically OTHINKWARE shall NOT be responsible for any problems and or damages that may occur from not using genuine or authorized parts and accessories It is strongly recommended that THINKWARE memory cards are used to minimize memory card error O Ensure that the device is completely off before removing the MicroSD card to avoid damages to the memory card OTo prevent loss of important data frequently copy recorded videos from MicroSD card to another storage device such as personal computer for back up 1 5 Vehicle Installation 1 5 1 Connecting the Device and the Mount 1 Align the mount with the connector A and slide it towards B until it clicks into place 2 Remove the protective film from the camera lens 1 5 2 Installing the Device 1 Remove the protective cover from adhesive mount and attach mount on the windshield where it has unobstructed view of the road but does not inter fere with the driver s view L Select the location on the windshield where buttons are accessible and clean the area2. 3 1 Using Live View GPS Connection Status S d d Backto m a main menu eae Rearview appears only when rear view camera is connected Rearview screen enlarges when the viewing Front View mas area is touched Current Speed Speed information is provided when the external GPS antenna is connected BU km h 2013 09 26 AM12 52Q luue Current Date Time Audio Settings File List 5 E G File List Audio Settings n 3 Device Settings ig S Device Settings System Settings System Settings 16 3 2 File List Recording will suspend when browsing through video list and settings menu Visual notification will ap pear on the screen to confirm the suspension of recording prior to entering the menu 3 2 1 File List lt D File List Continuous Recording Parking Recording Event Recording Manual Recording gt Continuous Recording Lists loop recording videos during continuous mode in 1 minute segments gt Parking Recording Lists motion detection recording videos during parking surveillance mode gt Incident Recording Lists incident recording videos during both continuous and parking surveillance mode gt Manual Recording Lists manual recording videos initiated by pressing REC button 17 3 2 2 Audio Settings D Audio Settings A 9 S Voice Recording Volume Control l X T sound setting Voice Guidance gt Voice Recording Sets voice recording on off
3. re m e K e e r n e e e r e e a e e n m K R R R R R R R n ee ee R R R een nee e e ETH oo a e e p e m 6 e e A e e e e m e ee Ree m e em n e m n w e en egn mmen a E DH e o e e e e o o e e e o e o e e r e e n r e r e e r e e e e r 0 e R a K n n n n n n n n n a n R n a n a K e R r K n n n s HIHIH e r e e ee e c c e e cer e eee e e e e e e e e e e e e e e e ae e n e n n n e e e e ose conse e n n n e n e Dieter tet i lt et te Oe ee ee ee ee a a ona p e m 6 e e e p e m 6 e e e e m 6 e n e 6 m 6 e e n n m e em e e mn m en Rm nme n pgn gwenn eee ee ee nnn Reen pengenn ennan enneg nnm enn nge nne nenen nenn enn ne onnenn ee ngee mnnm weenn nnn eenn nw ennenen enn pengenn pnns Volume Sets the volume of the playback 4 2 PC Viewer Configuration B X150_Setting ver 1 1 5 1 mE Memory partition Parking Mode oo SS Ane Aer Enabled pappen M e Switch to Parking Mode once the engine is turned off Continuous 60 M A Turn off the dash cam once the engine is turned off Event 2 Parking 4 e Battery voltage setting for stop recording C Disabled 11 8v 23 8v 12 0v 24 0v 12 2v 24 2v Manual 9 E Date Time Formatting memory card E 2015 f 23 fis 55 52 Formatting Get current time Voice recording Time zone Enabled C Disabled GMT 08 00 Pacific Time US and Canada Tijuana S Voice guidance Daylight Saving Time Enabled Disabled c o an Tf T 1 L 1 a 5
4. sensor may not be activated due to combination of user settings and the level of impact during the collision DTT FCC Statement This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause undesired operation This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful inter ference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures gt Reorient or relocate the receiving antenna gt Increase the separation between the equipment and receiver K Connect the equipment into an outlet on a circuit different from that to which the receiver is connected gt Consult the dealer or an experienced radio TV tec
5. 0 seconds after manual recording initiates total 1 minute sbeebs caGe resect tet ere eeecese bic sesueteeer eee eeeceiceee she ebeseee eee eet eee reeedeeecbecese eet esses eee rsscdenss eee leeeeese ste csee seer eee ee erte tees eb lsereehelsisdeeecee eee osecdee EEEE EEE EEEE _ Optional hardwiring cable and installa Parking Surveillance Mode tion are required for continuous supply of power when vehicle ignition is off TARRE ARP E ARARNAR eee eee hee eee en oe Setanta ne meetin niet hee eee AARAA AANRAAI ER NARRAR AREARE AE pe ae eb ERARA eee eee ee eee eee eee eee ees ieee hie ee eee beeen eee See eicee A ecewice REAR E A Recording mode Audio Recording Camera 5 0 Megapixel CMOS Sensor Viewing angle Approximately 120 diagonally Video Full HD 1920 x 1080 H 264 extension Av 1D 1280x 720 H 264 extension AVI tor rear view camera when connected Frame rate 1 channel Front view up to 24 fps 2 channel Rear view up to 15 fps Audio PCM Pulse code modulation Acceleration sensor 3 axis acceleration sensor 3D 3G Adjustable impact sensitivity 5levels Deemer Support V IN port Optional accessory that requires separate purchase GPS External GPS Receiver Optional accessory that requires separate purchase Input power source DC 12 24V Rear view camera 5V DC Current consumption 4 5W Max ae Front Security LED noicaon ED Rear Status LED 2ea GPS LED Warning sound Embedded speaker Voice buzzer sound guidance Oper
6. 7 Manual Recording In addition to recording accidents the dash cam allows the user to initiate manual recording mode to cap ture scenery and or places while driving This feature can also be used to save video as witness where the installed vehicle is not directly involved in an accident Video files saved during manual recording mode are stored in a separate location on the memory card and will be protected from video overwriting in continuous recording mode gt Briefly press the REC button to start recording The device will record video for 1 minute 10 seconds be fore and 50 seconds after as of the time when the button is pressed The recorded video will be saved under the manual rec folder wer Operation LED f Green Light ON y R d Li ht EELE E ls a ENE EE E E A A E O EE E AAA EE EAA EER E THINKWARE e ed Lig sad Blinking 7 Ji capture di cont rec jo dualsaye CE m m m E N i a ga 4 di manual eC ee di motion_rec S i ra plt pa pee 14 2 8 Upgrading Firmware gt The system will automatically be updated if the MicroSD card contains the firmware upgrade file L The device restarts automatically after the upgrade has been completed gt Make sure your device is always up to date with latest firm ware Please check back frequently at THINKWARE website www thinkware com for the latest firmware updates 15 3 Touch LCD
7. English 2 Impact Sensitivity T _ Speed unit i i Km h C MPH Low Mid High Security LED Motion Sensitivity Enabled Disabled s Version ae Mid High Model name X150 Firmware Ver 0 0 5 Initialize Save Cancel gt Memory Partition Sets how storage space on the memory card will be allotted for each recording mode gt Formatting memory card Initiates memory card format gt Voice recording Sets the voice recording on off during video recording gt Voice Guidance Sets the voice guidance on off and the voice guidance volume gt Impact Sensitivity Sets the impact sensitivity gt Motion Sensitivity Sets the sensitivity of the motion detection sensor gt Parking Mode Sets the use of parking surveillance mode when the dash cam is installed using hardwiring gt Battery voltage setting for stop recording Sets the voltage level for the dash cam to automatically power down in order to prevent the vehicle battery from draining gt Date Time Sets the date and time L Get current time Retrieves the current time from the PC gt Time zone Sets the time zone gt Daylight Saving Time DST Sets the daylight saving time gt Language Sets the system language for the dash cam PC Viewer Setting only supports English gt Speed unit Sets the unit for the vehicle speed gt Security LED Sets the security LED on off gt Version Version information for the dash cam and its firmware gt Save 1 Press Save button to sto
8. THINKWARE DASH CAM X150 LJser Manual C RoHS This Dashboard Camera dashcam is a specialized onboard device that continuously records video while the vehicle is in use Some features may not be available depending on installation driving conditions and vehicle type The video quality might vary for each device as a result of installed firmware The device DOES NOT guarantee video recording of all accidents as built in impact sensor may not be activated due to combina tion of user settings and the level of impact during the collision 01 02 03 04 05 Before Using THINKWARE DASH CAM X150 FCC Statement Caution Getting Started 1 1 In the Package 1 2 Optional Accessories 1 3 Product Overview 1 4 Inserting a Memory Card 1 5 Vehicle Installation Basic 2 1 Turning the Device Power On Off 2 2 Date Time Settings 2 3 Connecting External GPS Receiver Optional Accessory 2 4 Recorded Files 2 5 Recording Videos While Driving 2 6 Recording Videos While Parked Optional Accessory 2 7 Manual Recording 2 8 Upgrading Firmware Touch LCD 3 1 Using Live View 3 2 File List PC Viewer Software 4 1 Thinkware Dash Cam PC Viewer 4 2 PC Viewer Configuration Device Information 5 1 Specifications LM N NO WM E A 10 11 12 13 14 15 16 17 21 25 26 Before Using THINKWARE DASH CAM X150 gt Under the copyright laws this manual may not be copied in whole or in pa
9. ation 10 C to 60 C 20 C to 70 C Storage Temperature 14 F to 140 F 4 F to 158 F 26
10. before securing the mount with attached 3M tape To ensure that the mount is safely secured sepa rate the device from the mount after installation Press the mount towards the windshield to allow the adhesive on the mount to set before connect ing the dash cam L Attach the dash cam to the mount once the mount has been securely attached 1 5 3 Connecting to power ee ee ee ee eee ee ee ee eee ee ee ee ee eee ee eee ee eee ee eee eee ee eee eee eee eee eee 1 Connect the power cable to DC IN socket of the device 2 Plug the car charger adapter end of the power cable into a 12V DC vehicle power socket 3 Arrange the wire by using the adhesive cable hold ers as shown below 4 Adjust the camera so that the dash cam is facing forward and is level with the road After installation turn on the dash cam and use the live view on the LCD screen to adjust the camera angle Tightenr loosen the screw on the mount with a coin to re ad Just the vertical viewing angle of the dash cam Hide the power cable by placing tucking it in the space between the vehicle ceiling Recommended locations for and headliner at the top of the windshield attaching adhesive wire clips to arrange the power cable are illustrated in the diagram For more information on the power cable routing instruction please visit Thinkware
11. ce is positioned as instructed in this guide Do not operate or handle power cable with wet hands Do not use a damaged power cable Keep the power cable away from heaters or other hot objects Check that power cable with correct connector is used and the connections are secure and firmly in place Do not pull insert or bend the power cable using excessive force Do not place heavy objects on the device and the power cable Do not modify or cut the power cable THINKWARE does not guarantee that devices or peripherals not authorized by THINKWARE will be compatible with its Product Do not attempt to insert foreign objects into the device or power cable Do not spill or spray liquid into the device as it may cause malfunction fire or electric shock This device is intended to be used inside the ve hicle only 1 Getting Started This unit was tested with shielded cables on the peripheral devices Shielded cables must be used with the unit to ensure compliance 1 1 In the Package amp 2 Si Si tsp eh ine vit es eS es lf T aE R r Some lt i mis i i r Sigh Chm ie ie ie Ge hm iii et a sre ne si Se Gea Gig ee ee T arhan S e T eee S Se Sri ee iar eG in a a rite 3 Mount with 3M tape Adhesive Cable Holder Car Charger 3 1ea Sea Main Dash Cam Unit i i a i ye mm i on i Se ri ag inn mc i en aa nm tn gi eS i nl nme an ci ms ue Ss me en ire Sg MicroSD memory card with adapter USB Mi
12. croSD card Quick Start Guide Warranty consumable reader User Manual stored in the MicroSD card 1 2 Optional Accessories es e i a a T a a hi a Sse Fe Ct gee cnt O eS ce Ch a R er E hat ena Gti at sii A T E n T a i oe T i a Tr T r b Tet bar et r Rr et ie Ce aa th External GPS Receiver Rear View Camera Hardwiring Cable 1 3 Product Overview THINKWARE Camera Lens Description Front facing camera for video recording III nn K e e e e e nn nnn e e nn nnn e e e e e K e ee nnn en enn sn R en ee een ee enn ee een enn en ee ene R ee ee ee ee ee ee ee ee ee ee ee ee eee eee P aoaaa ACAI ACRC AERA AARAA AAA REAA AAA RASA SAAC MACARRON ACA ARRRACAH RAAT un AA A A e e e e e e r e e e e e e e e e e e e e e e e e e e e e o e e e e e e n n n a Operation indicator lights that are used to visually indicate that the vehicle is equipped with a dash cam BSBA RIS RIKI 9 CHR EKO OC O ETRE KK IERIE HIROKO IOI ICO ee ee een ee nie ee eee eee eet eee eee ee ee eee ee eee eee ee eee eee eee ee eee ee eee eee eee eee eee Se a en EE EEE nn nn e K e nen nn e K e een e e ne ee nee R en ee een nee een nen een eee sn ee een ee ee en ee eee ee R ee eee eee ene FI AA AAA ACR CAC MR ACACHCRCAC AACA SAC RRC SRCACH MACACA CREATAS RAHAT ATA HCHCSR CAA CATASICH RSAC AAnn AA Nn An Nn Ann Annn e e e e e e e e e e e e e e e K e e e e e e e e o e e e e e e n R
13. ewer application Dash Open With Viewer 1 Move to Trash l Get Info Burn Dashcam Viewer_140413 zip to Disc Duplicate Make Alias Quick Look Dashcam Viewer_140413 zip Share Copy Dashcam Viewer_140413 zip Clean Up Selection Show View Options Tags A LARA Cautions O System requirements MAC OS X 10 8 Mountain Lion or later OS X 10 9 Mavericks OS X 10 10 Yosemite 22 4 1 3 Select the Device Drive for X150 Click File W from menu and select the drive for the portable storage drive for the connected MicroSD card Select any file from the list to load entire video playlist in the memory card A 16 15 14 S a 1 2 smi Cautions OThe MicroSD card will not be recognized by the software until it has been initialized in the dash cam O It is recommended that the user record at least one video clip on the MicroSD card with the dash cam unit before accessing the Thinkware Dash Cam PC Viewer 23 4 1 4 Thinkware Dash Cam Viewer Overview File open s Viewing screen Playback Progress Current Playing Time Total Playing Time Driving speed pe 000 Full screen Dash cam setting Information Switch between front rear view Front km h PC Viewer g Rearview Enabled only if Mi veu Map Satelite croSD card contains video captured using rear view camera L aaa ergs GLS ueg sayy 00 0 R Z Map Play List Checks the location e
14. gt Volume Control Sets the volume level low mid high gt Sound Setting Sets the audible alerts on off gt Voice guidance Sets voice guidance on off 18 3 2 3 Device Settings D Device Settings fa LCD Auto Off Impact sensitivity Motion sensitivity rA Parking Mode Off Voltage gt LCD Auto Off Sets the time for LCD auto shut off gt Impact Sensitivity Sets the impact sensitivity level low mid high gt Motion Sensitivity Sets the sensitivity of the motion detection sensor gt Parking Mode Monitors vehicle ignition status to automatically convert to parking mode when the vehi cle engine is turned off gt Off Voltage Sets the voltage level for the dash cam to automatically shut down in order to prevent drain ing of the vehicle battery 19 3 2 4 System Settings _ System Settings ED L Language Unit set Time Memory Card Format Device Info gt Language Unit Sets the system language and speed unit gt Set Time Sets the time gt Calibrate Touch Screen Calibrate touch screen to ensure accurate touch response Touch center of the cross as instructed gt Format Memory Card Formats the MicroSD card gt Device Info Displays current firmware version gt Factory Reset Restores to factory setting 20 4 PC Viewer Software 4 1 Thinkware Dash Cam PC Viewer Thinkware Dash Cam Viewer for Windows MacOS is provided which can be used to watch videos recorded wi
15. hnician for help FCC CAUTION Any changes or modifications to the equipment not expressly approved by the party responsi ble for compliance could void your authority to operate the equipment This Class A digital apparatus complies with Canadian ICES 003 2 Caution Depending on the make and model of your car the power may be constantly supplied to the dash cam even with the ignition turned off This may result in vehicle battery discharge This device is designed to record video while the vehicle is in operation The quality of the video might be affected by weather conditions and the road environment such as day or night presence of street lighting entering exiting tunnels and the surrounding temperature amp THINKWARE is NOT responsible for the loss of any recorded video during operation Although designed to withstand high impact of car collision THINKWARE does NOT guarantee re cording of accidents where the impact may cause the device to be damaged Keep the windshield clean for optimal video qual ity If a foreign substance e g fingerprints is at tached to the lens it may reduce the quality of the recorded videos Keep the lens clean all the time The specified operating temperature of this prod uct is 10 C to 60 C 14 F to 140 F and storage temperature is 20 C to 70 C 4 F to 158 F En sure that the device is kept within these tempera ture ranges otherwise the device may not func ti
16. homepage www thinkware com Preventing Vehicle Battery Discharge E Depending on the make and model of your car the power may be supplied to the dash cam even with the ignition turned off This may result in vehicle battery discharge m Some vehicles with multiple power sockets might be equipped with at least 1 outlet that does not shut off the power with the ignition Test each power outlet to ensure you connect to an outlet that shuts off with vehicle ignition 2 Basic Operations 2 1 Turning the Device Power On Off gt Once connected to the vehicle the device will automatically turn on and off with vehicle ignition Power cable for vehicle WV C OFF Red Light ON gt To manually turn the device ON OFF use the power switch on the side L Push up the power switch to turn the device ON 2 2 Date Time Settings P It is strongly recommended to have the date time and time zone configured on the device gt Ifthe LCD is off touch the LCD screen to activate the display 4d TimeZone _ Date Time 1 Go to System Settings gt Go to System Settings gt Set time gt Date Time Set Set time gt Time Zone ting to set the local date and time Setting to set the local time zone 2 3 Connecting External GPS Receiver Optional Accessory gt External GPS Receiver is available as an optional accessory that can be purchased from Thinkware autho rized dealers gt External GPS Recei
17. n n n e n K n n e CETTE a e e e e m p e g 6 p m e e g e e m e e e e n e n m e e e n ne e R e enne n pnn nwn TEETE III MMMM e K m e e e K e m e e K e e m m K e e e m e K e em nn R R R R R R n R nee H ee CETTE nm e e m p e e g 6 p e R e e g e e m e e e n e n m e enne Rgn nn Rn OR nnn nene nwn Renne nnm Renne nn TEE Connects to rear view camera Optional rear view camera is not included and requires separate purchase FENN eee RN AER MMR AU OAL U ARMA ARN MMMM e r e e e e rr e e e e e a n a e n e e n e Connects to external GPS receiver optional accessory that requires separate purchase III nn nn e e e e nn nn nn e r nnn nnn e e en e nn en nn nnn nnn nn en enn nnn en en enn nee enn en enn nnn en een ee een ee ee ee ee ee ee eee ee ee ee ee eee eee ce te ee ee ee ee EE oa SO SO ee ee dee eee eee eee eee sees ee eee ee Rone ennenen nnn pnn ennenen pennn ees na OSU aE nn r e nn e nn nen eee ee eee se ee ese non ees e e Memory Card Slot Location for the memory card 1 4 Inserting a Memory Card 1 4 1 About Memory Cards gt The MicroSD card should be formatted every 2 weeks to maximize the lifetime of the memory card 1 4 2 Installing a MicroSD Card Insert the MicroSD card into the slot with the metal contacts facing up toward the mount connector and push until it locks into place q Inserting the memory card Amicro SD Removing the memory card
18. on as designed and at extreme temperatures permanent physical damage can result which is not covered by warranty Avoid placing the device under direct sunlight Avoid using the device in extreme conditions where the Product is exposed to high tempera ture and or humidity Only use genuine accessories and peripherals from THINKWARE or authorized THINKWARE deal er THINKWARE does not warrant the safety and compatibility from use of peripherals from other manufacturers Use genuine parts supplied by THINKWARE Do not apply excessive force when pushing the buttons on the device Do not clean the Product using chemical cleaner or solvents as it may damage plastic components Use soft clean dry fabric to gently wipe the Prod uct Do not place or store the device where it can be accessible by children and pets amp Do not disassemble the Product as it will void product warranty and may also damage the prod uct Handle with care Drop shock and mishandling the Product may result in malfunction and or damage to the device Do not operate this device while driving Install this device in a location where it has unob structed view of the road but does not interfere with the driver s view Check with your local and regional laws before mounting to windshield The device and or installation parts have moving parts and may shift in extreme road conditions such as unpaved road Check frequently to ensure the devi
19. re the new configuration on the MicroSDcard and apply the changed settings 2 Saved configuration is stored in blackbox cfg file located in MicroSD card under Settings folder 3 Insert the MicroSD card with changed settings to apply the changes to the device O Deleting Removing blackbox cfg file using PC file explorer will disable the use of PC Viewer In such case insert the MicroSD card and power on the device which automatically generates blackbox cfg file with default settings to enable use of PC Viewer 25 5 Specifications 5 1 Specifications The specifications of this product may change without prior notice for product improvements Standard 104 x 63 x 27 5mm 102g ze cial 4 1 x 2 48 x 1 08inches 0 225lbs Display Panel 3 5 TFT LCD 480x320 Capacity MicroSD card 8 16 32GB Class 10 Continuous Recording Mode Records in 1 minute segments iicbecotewaele veneer ere seecetdotecose scene ete Sec e terse ecee ester dtbeeee web EEEE EEE EEEE EE webu seecdseosscceteseccesesssicede eee eetie eet eee leeks dee eee eee resect tebcscwesee rece sees sede eeeseeebterseeeenitees 10 seconds before after incident total 20 seconds tess n RnB rE HHR Ka H H H aho R Rea Pri n Ee BrE H Raa rr eh HERE B H PRE n a H ab HR bese HN H Eai R H b R a HD Rahab Hra biai n Ha H EE H He e Cece H aR Ga rE H es see fees B haB H H see cece asec eee Seed cesar seeds Ese reessee cecesses H a aho R Ho H hab HRO B Prat ee ssesetan oes 10 seconds before and 5
20. rrors of the recorded video Enabled only if video is captured while connected using GPS antenna optional in some models and must also be connected to the Internet Ver 1 2 1 00 Playlist Impact sensor value X Note In the parking surveillance video playlist motion detection playlist is not used so incident and motion detection recordings during parking surveillance mode are displayed in the same playlist labeled Incident P Play Previous DTH ee Rewinds the current file being played by 10 seconds If selected it continues to rewind by 10 seconds eget E E E Oe ne EE e a EEEL EE ee a EES a M a nn nn en m e m e R ne ne ee enn ee en ee eee nen een en en a a a ene eee enn ne enn en ee aaa Stops the file being played The playback status resets to the starting point of the video ee ee ene a e e m m me e e e m m r e m r m r K e e e e e r e e m e e e ee r m K m e e e n e en E ee ese en ee en eee R ee eee ee ee ee ee ee ee eee eee ese eee ese eee eee nee eee en ee eee eee eee eee ees Fast forwards the current file being played by 10 seconds If selected it continues to fast forward by 10 seconds FRR PRR RI PH RRS AAA AA HRAA AAAS A AAAS R ARASH R SARA RCERR RMAC RRA RAR A A e a e e e e o o e e e o e e e e e n r e e e e r e e e e e r e a K n R e R n a n a n a n n a a R a R n R e R n n R K e r R n R a R R n n n na TEETH a m m r m m K K m e r m e e e
21. rt without the written consent of THINKWARE gt Every effort has been made to ensure this Guide s accuracy However we cannot guarantee the accuracy of the contents in this document as there may be technical errors omissions and or future changes gt THINKWARE reserves the right to change or modify the product and the content of this manual at any time without prior notice for product improvements gt Images contained in this user guide are illustrations for instructional purposes only and may differ from the actual product gt Users do not reserve the right to use the product for purposes other than as specified in this user guide According to the Personal Information Protection Act and other related regulations the user owner may be held liable if the video and or conversation recorded by the device are distributed without their consent Thus special attention should be paid in using this product The MicroSD memory card should be tested for errors on a regular basis and as the memory card is a consumable item it will need to be replaced periodically THINKWARE shall NOT be responsible for any problems and or damages that may occur from the use of disingenuous modified or unauthorized parts and accessories The device and the recorded videos are intended for personal use and the recorded videos should be used for reference only The device does NOT guarantee video recording of all accidents as built in impact
22. th the dash cam The video files recorded by the dash cam are in one minute segments and the PC viewer allows the user to watch these segments as a single continuous video The setup file for the Thinkware Dash Cam PC Viewer is included in the MicroSD card within the package Please check THINKWARE homepage www thinkware com for the latest Dash Cam PC Viewer application 4 1 1 Thinkware Dash Cam PC Viewer Software 1 Insert the MicroSD card into the USB MicroSD card reader included in the package with front side facing up as shown in the illustration 2 Connect the USB MicroSD card reader to the PC Ensure that the USB card reader is correctly oriented when inserting it into the USB drive 21 4 1 2 Installing Thinkware Dash Cam Viewer 1 Double click the Thinkware Dash Cam Viewer setup file saved in the MicroSD card to initiate program installation DASHCAM PC VIEWER is successfully i x x x installed 2 Double click the application icon once PC Viewer T nee installation completes and the application main screen will then appear Cautions O System requirements SS Windows XP 32 bit Windows 7 32 64 bit Windows 8 x 32 64 bit 1 Move the file named Dashcam Viewer zip stored in the MicroSD card to the desktop Right click on the mouse and select Open With gt Archive Utility to launch the Thinkware Dash Cam vi
23. torage device O Do not tamper with the system files within the in the MicroSD card This may result in unexpected behavior during operation 11 2 5 Recording Videos While Driving 2 5 1 Continuous Recording Mode gt Videos are recorded in 1 minute segments and saved as files in the MicroSD card under the folder named cont_ NW rec NI N i Operation LED Iles y Security LED E SZ Conan Green Light ON L White Light Blinking aa a ed ei i ie ca af ei hm i me ma a a i ime i a el R E e E N eae tt lne mydeco nf tt ey itp ein funn ust i hit bede a 2 5 2 Incident Recording During Continuous Recording Mode gt When the dash cam detects impact it will immediately store the 10 seconds prior and after the impact gt The 20 second impact recording is saved on the MicroSD card under the evt_rec folder Note that the dash cam will detect impact as incident only if the level of impact is greater than the sensitivity of the G sensor set in the user configuration NI N Ma a Operation LED E GD Green tight ONT K E Red Light e Ig il Blinking I an E ba ba eln d t B E E E E E EE T d Cautions O Driving over speed bumps manholes or uneven roads at high speeds can also be detected as an impact and may trigger incident recording O The device can record up to 1 minute of incident recordings in the case of contin
24. uous impacts or multiple accidents O The duration of incident footage recorded may vary according to the device settings 12 2 6 Recording Videos While Parked Optional Accessory This feature is available only when the dash cam has been hardwired directly to the vehicle battery Separate purchase for the hardwiring cable accessory and professional installation is required 2 6 1 Incident Recording gt When the dash cam detects impact while parked it will immediately store the 10 seconds prior and after the impact gt The 20 second impact recording is saved on the MicroSD card under the evt_rec folder sa e S m K SI 2 6 2 Motion Detection Recording The dash cam and the optional rear view camera are both equipped with motion detectors which are used to detect motion that initiates video recording while the vehicle is parked gt When the dash cam detects motion while parked it will immediately store the previous 10 seconds prior to the activation of motion detection start recording video for the next 10 seconds gt The 20 second motion detection recording is then saved on the MicroSD card under the folder named parking_rec NI Security LED wy CO oD L C C ms THINKWARE White Light Blinking N aa e pa Ia m i Se me i et i i mP Cautions O The device can record up to 1 minute for continuous impacts in the case of multiple collisions 13 2
25. ver enables recording of vehicle locations in the video file for driving route tracking L Connect external GPS Receiver to the GPS port of the dash cam ax Ge Blue Light on Cautions OTHINKWARE shall NOT be responsible for any problems and or damages that may occur from not using genuine or authorized parts and accessories It is strongly recommended that THINKWARE external GPS receiver is used OTurn the device off completely before connecting the GPS receiver to avoid damages 10 2 4 Recorded Files K Recorded video files are saved in the folder by date and hour in the MicroSD card L Files are created based on the time when the videos are recorded x mm e mm mm mm mm mm mm m mm Rec ZU 1 30627 R g gt Year Month Day T T Front view Minute recording di manual_rec di motion_rec Fs Rec 20130827 102245 Rec_20130827_102229 5 Rec_20130827_ 102248 D Rec_20130827_102348 D Rear view recording optional rear view cam Rec 20130827 102129_ 5 era must be installed B A H ie Rec_20130827 104 K py Rec_20130627_ 102746 D L As aloop recording surveillance product the dash cam will automatically overwrite oldest file in the memory card once the memory is full However event recording and manual recording videos are stored in separate locations and will be protected from file overwriting Cautions O Do not use the MicroSD card as an external s
Download Pdf Manuals
Related Search