RCR311W - Pdfstream.manualsonline.com
Contents
1. RCR311W Universal Remote Control Owner s Manual Manual del Propietario parte posterior Ze aw Illuminated ON OFF key 4 S Serves as an indicator fo ON OFF S light to provide a feedback LO 5S ee ae Component keys TV VCReDVD SATeCBL Backlight key Turns aa backlighting on off we GOBACK cpp INFO O j G INFO key Displays O a A information pertaining to the component you fo AON N are currently controlling v a x Xe MS CH and VOL keys have MENU dual functions They act as navigation keys up down right and left arrow keys in menu systems Dedicated MENU key for DVD disc menus satellite receivers and some TVs CN o SLEEP key Allows you NL 8 Z to set a time to turn off SLEEP NAUT your TV automatically z aAA A gt INPUT key On some La A y Co ae remotes this is called REVERSE PLAY FORWARD the TV VCR key It toggles through all the video sources connected to your TV RECORD STOP PAUSE Transport keys REVERSE PLAY RGA J FORWARD RECORD j STOP and PAUSE keys Actual model may vary from picture shown Three Component Universal Remote Congratulations on your purchase of this three component universal remote This universal remote controls up to three electronic components and makes juggling remote controls a thing of the past Your remote is guaranteed to work with all brands of2. Attempt to control a variety of the component s functions with the remote If some of the features of your component do not work try programming the remote using the direct code entry method Direct Code Entry To program your universal remote to control your components using the Direct Code Entry Method follow the steps below 1 Manually turn on the component you want the remote to control 2 Locate the enclosed Code Lists Find the list for the component you wish to program Find your component s brand You will see a listing of four digit codes for each brand If your brand isn t listed use one of the Code Search methods to program the remote control Refer to pages 3 and 4 for Manual and Auto Code Search methods Note You can also use the online code finder at www rca com codefinder to find the best code for your component ON OFF 3 Press and hold the component key TV oe VCR DVD SAT CBL you wish to COS program The illuminated ON OFF key turns on and remains on If you release the component key at any time during the Direct Code Entry procedure the illuminated ON OFF key blinks four times and the process is exited 4 While holding down the component key consult the Code Lists for the four digit code that corresponds to your component s brand and use the number keys 0 9 on the keypad to enter it While you are pressing the numbers the illuminated ON OFF key turns off 5 After the fourth number
3. To exit without saving at any point in the Auto Code Search press and release the GO BACK key 1 Manually turn on the component you want the remote to control TV VCR DVD satellite receiver or cable box Note If you press an invalid key during the Auto Code Search the remote does not respond If you do not press a valid Auto Code Search key TV VCR DVD SAT CBL ON OFF GO BACK PLAY REVERSE FORWARD STOP the search times out after two minutes When the search times out the illuminated ON OFF key blinks four times and turns off The last programmed code under that component key is retained 2 If you are programming the remote to control your TV satellite receiver or cable box go directly to step 4 3 To program the remote to control a VCR or DVD The VCR DVD key can control only one component either your VCR or your DVD To program your remote to control either your DVD or your VCR you must first put the remote in the proper programming mode Follow these directions before proceeding to step 4 a Press and hold the VCReDVD key The illuminated ON OFF key turns on b While holding down the VCR DVD key press and release the number 2 key on the keypad to control a VCR or the number 3 key to control a DVD The illuminated ON OFF key turns off cos 6 After holding down both keys for three seconds the FORWARD c Release the VCR DVD key The illuminated ON OFF key blinks four times and then turns
4. Handle the remote gently and carefully Don t drop it e Keep the remote away from dust and dirt e Wipe the remote with a damp cloth occasionally to keep it looking new e Modifying or tampering with the remote s internal components can cause malfunction and invalidate its warranty Programming Your Remote Your universal remote can operate a variety of brands of components In order for your universal remote to control your components you need to program the remote with the codes that match the components See Code Lists enclosed These codes enable the remote to communicate with your components Each brand and each component has its own language and by programming the correct codes into your remote you tell the remote to speak the same language as your components The RCA Easy Interactive Code Finder The online interactive code finder at www rca com codefinder makes it easier to find exactly the right codes for your components The code finder takes you right to the best code s for your component no need to go through long code lists There are four methods you can use to program your remote control to operate your components Brand Code Search and Entry e Direct Code Entry Manual Code Search and Entry Auto Code Search and Entry Most components can be programmed in one of these four ways Try them in the order listed In order to control combo units like TV VCRs or TV
5. off Your remote is now either in VCR or DVD Programming Mode depending on which you chose Proceed to step 4 4 Press and hold the component key TV VCR DVD SAT CBL you wish to program The illuminated ON OFF key turns on and remains on ON OFF 5 While holding the component key down press and hold the ON OFF key The illuminated ON OFF key turns off illuminated ON OFF key turns back on 7 Release both keys The illuminated ON OFF key remains on Tip Throughout the programming of each key be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control pray 8 Press and release the PLAY key p then wait five seconds to see if your component turns off If your component does not respond continue to press the PLAY key every five seconds until your component turns off Each time you press the PLAY key the illuminated ON OFF key blinks and a block of 10 codes are sent Ses a7 to your component This process SA continues until all of the codes A t in the Code Lists have been searched If your component has not turned off after all codes have been searched the illuminated ON OFF key blinks four times and turns off The Auto Code Search Entry method is exited reverse 9 When your component turns off you know the a correct code is in the last block of 10 codes sent GS Press and release the REVERSE key Wait two seconds to
6. the STOP key which would store the code Instead wait 4 seconds with the unit now off continue to press the ON OFF key repeatedly until the unit turns back on Once the unit tums back on you have found another code that operates the component Press the STOP key 3 Test the functionality again by attempting to control a variety of the component s functions If the code that has been stored controls the majority of the component s functions programming is complete If the code stored does not give maximum functionality you will want to try another code 4 Repeat the Manual Code Search and Entry Method from step 1 Each time a code turns the component on or off you have found a code that operates the remote and needs to be tested for maximum functionality Continue through the code lists cycling through the codes you have already tried until you find one that offers maximum functionality Auto Code Search and Entry The Auto Code Search and Entry Method enables the remote to automatically search through all the codes in the Code Lists for the one that operates your component Note The Manual and Auto Code Search methods may take a long time because the remote searches through all of the codes in its memory for the code that operates your component Therefore if your brand is listed in the Brand Codes or the Code Lists first try the Brand Code Search or the Direct Code Entry methods described on pages 2 and 3 GO BACK Tip
7. DVDs you must program the individual corresponding component keys to control each part of the combo unit Once programmed successfully the TV key controls the TV functions on your unit and the VCR DVD key controls the VCR or DVD functions respectively There is a specific section in the Code Lists for combo units The codes in this section should be tried first using Direct Code Entry on the TV and VCR DVD keys If this is unsuccessful follow the normal programming methods for both the TV and the VCR DVD keys Brand Code Search and Entry If your brand is listed in the Brand Code List See Code Lists enclosed you may be able to program your universal remote by searching through only the Code Lists for that specific manufacturer Brand Code Search and Entry can be the quickest method to program your remote if your component TV VCR and or DVD satellite receiver and or cable box is one of those brands listed If your brand is not listed in the Brand Code List use one of the other programming methods Direct Code Entry Manual Code Search and Entry or Auto Code Search and Entry Follow these instructions to program your remote using the Brand Code Search and Entry method GO BACK Tip To exit without saving at any point in the Brand Code Search press and release the GO BACK key 1 Manually turn on the component you want the remote to control TV VCR DVD satellite receiver or cable box 2 Locate the Brand Codes in th
8. VCR or DVD player when programming the VCR DVD key TV when programming the TV key cable box or satellite receiver when you re programming the SAT CBL key Ifyou ve used the Direct Entry programming methods to enter the codes for your brand and the unit is still not functioning properly try one of the Code Search methods See Code Search Methods on pages 2 3 and 4 To control combo TV VCR or TV DVD units you must program both the TV key and the VCR DVD key Once programmed successfully the TV key controls the TV functions on your unit and the VCR DVD key controls the VCR or DVD functions There is a specific section in the Code Lists for combo units The codes in this section should be tried first using Direct Code Entry on the TV and VCR DVD keys If this is unsuccessful follow the normal programming methods for both the TV and the VCR DVD keys Make sure the batteries are fresh and are properly installed Problem The remote doesn t perform commands properly You must put the remote in the correct mode by pressing the corresponding component key TV VCR DVD SAT CBL so the remote knows which component you want to operate Make sure component is ready e g DVD player has disc loaded VCR has tape loaded etc You may have pressed an invalid key for the mode the remote is in If you re trying to turn on an RCA GE or PROSCAN branded component press the component key TV VCR DVD SAT CBL
9. batteries promptly and recycle or dispose of them in accordance with Local and National Regulations Battery Saver Your universal remote control saves battery power by automatically turning off if any key is pressed for more than 60 seconds This saves your battery life should your remote get stuck in a place where the keys remain depressed such as between sofa cushions Backlighting Backlight illumination enables you to see the remote control keys better in the dark Backlight illumination is toggled on or off with successive keypresses of the ht key When toggled on the backlighting remains on as keys are being pressed The backlighting turns off six seconds after the last keypress Once the backlight time has expired any keypress will reactivate backlighting If the backlight illumination is on and the backlight key is pressed the backlight turns off backlig as long Illuminated ON OFF Key The ON OFF key powers components on and off It also lights up to serve as an indicator light providing feedback for various functions When a valid key is pressed the illuminated ON OFF key remains lit as long as the key is pressed and turns off when the key is released The ON OFF key also blinks in Programming Mode or in Menu Mode to provide feedback Care and Maintenance e Keep the remote dry If it gets wet wipe it dry immediately e Use and store the remote only in normal temperature environments e
10. components The three component universal remote is easy to use easy to program and gives you control at the touch of your fingertips SAVE THIS MANUAL AND THE CODE LISTS Remote controls can sometimes lose their programming when you change the batteries Make sure you keep the manual and code lists in a safe place so that you can reprogram the remote if you need to Tip The three component universal remote is already programmed to operate most RCA GE and PROSCAN branded TVs DVD players and satellite receivers Just press the corresponding key VCR DVD for a DVD player TV for a television SAT CBL for a satellite receiver Battery Installation and Information Your universal remote requires two AA Alkaline batteries batteries may or may not be included depending on model To install the batteries 1 Remove the battery compartment cover 2 Insert the batteries matching the batteries to the and marks inside the battery compartment 3 Press and push the battery cover back into place Note Ifyou are replacing batteries try not to press any keys after you ve taken the old batteries out Pressing keys while replacing batteries causes the remote to lose the components youve programmed You will need to program the remote again Battery Precautions Do not mix old and new batteries Do not mix alkaline standard carbon zinc or rechargeable nickel cadmium batteries Always remove old weak or worn out
11. e Code Lists and keep it handy Note Ifyou press an invalid key during the Brand Code Search the remote does not respond and the search times out after two minutes When the search times out the illuminated ON OFF key blinks four times and turns off The last programmed code under that component key is retained 3 If you are programming the remote to control your TV satellite receiver or cable box go directly to step 5 4 To program the remote to control a VCR or DVD The VCR DVD key can control only one component either your VCR or your DVD To program your remote to control either your DVD or your VCR you must first put the remote in the proper programming mode Follow these directions before proceeding to step 5 a Press and hold the VCR DVD key The illuminated ON OFF key turns on b While holding down the VCReDVD key press and release the number 2 key on the keypad to control a VCR or the number 3 key to control a DVD The illuminated ON OFF key turns off c Release the VCR DVD key The illuminated ON OFF key blinks four times and then turns off Your remote is now either in VCR or DVD Programming Mode depending on which you chose Proceed to step 5 5 Press and hold the component key TV VCR DVD SAT CBL you wish to program The illuminated ON OFF key turns on and remains on ON OFF 6 While holding the component key down press and hold the ON OFF key The es oO illuminated ON OFF key turns off 7 Aft
12. e found the correct code If it cycles through and the illuminated ON OFF key blinks four times and turns off all codes have been searched The Manual Code Search method is exited m 9 Once your component turns off you have found W ithe correct code You must save the new code STOR by pressing and releasing the STOP key The illuminated ON OFF key turns off You must press the STOP key to save the code or the correct code will not be stored Testing the Code for Maximum Functionality To confirm that the component key is programmed with the correct code for maximum functionality it is necessary to test the component If some of the features of your component do not work different codes in the list can be tried until you find the code that allows the remote to control the majority of your component s functions Different codes can provide different levels of functionality Follow these steps to test for maximum functionality 1 Once the code has been stored see Manual Code Search and Entry Method page 3 use the remote to attempt to control a variety of the component s functions If the code that has been stored controls the majority of the component s functions programming is complete If the code stored does not give maximum functionality you will want to try another code 2 In that case repeat the Manual Code Search and Entry Method from step 1 When the component turns off for the first time do not press
13. e through all their features and functions While this remote cannot access every menu system of every component model it does offer some menu functionality To use a component s on screen menu system you first have to put the remote in Menu Mode 1 Make sure your components are turned on and your TV is set to the component s input Use the INPUT key to toggle through video sources when in TV mode 2 Press the component key whose menu you want to access 3 Press the MENU key The illuminated ON OFF key blinks indicating you are in the Menu Mode Use the VOL and CH keys to navigate through the on screen menu system MENU 5 To make a selection from the on screen menu press m the MENU or OK key to select the highlighted item Tip If the remote doesn t respond check to see that the o illuminated ON OFF key is still blinking Note it times O out afier 20 seconds If this happens just press the MENU key again and then retry your selection Exiting Menu Mode The remote automatically times out of Menu Mode after 20 seconds of inactivity no keys being pressed At that time the remote clears the displayed menu from the TV If you want to exit the Menu Mode yourself press the corresponding component key on the remote TV VCR DVD SAT CBL The illuminated ON OFF key turns off Sleep Timer This feature automatically turns off your TV at a duration you choose from 1 to 99 minutes The Sleep Timer o
14. enter a channel number Remove any obstacles between the remote and the component Make sure to aim the remote at the IR sensor on the component Problem The component s menu does not appear on the TV screen Make sure you have connected your component to your TV properly and selected the correct Input See your components Owner s Manuals for proper connection procedures You must put the remote in the correct mode by pressing the corresponding component key TV VCR DVD SAT CBL so the remote knows which component you want to operate Menu access isn t supported for all brands If that s the case you ll need to use your original remote control to access menu functions for these components For more information please visit www rcaaccessories com Limited Lifetime Warranty Audiovox Electronics Corporation the Company warrants to you the original retail purchaser of this product that should it under normal use and conditions be proven defective in material or workmanship during its lifetime while you own it such defect s will be repaired or replaced at the Company s option without charge for parts and repair labor To obtain repair or replacement within the terms of this Warranty the product is to be delivered with proof of warranty coverage e g dated bill of sale specification of defect s transportation prepaid to the Company at the address shown below This Warranty does not cover produc
15. ep 5 until you have retrieved all four numbers in the code 7 After the fourth number is retrieved the illuminated ON OFF key blinks briefly then turns off 8 To exit the Code Retrieval Mode press and release the GO BACK key at any time 9 If you press an invalid key during the Code Retrieval process the remote will not respond If you do not press a valid Code Retrieval key TV VCR DVD SAT CBL INFO GO BACK Code Retrieval times out after 15 seconds The illuminated ON OFF key blinks four times and then turns off TV CODE SAT CBL CODE B sar L caste VCR DVD CODE Using the Remote to Control Your Components Because this remote controls more than one component you must first tell the remote which component you wish to operate That means if you wish to operate your TV you must first press the TV key to put the remote in the TV Mode The remote stays in the chosen component mode such as TV Mode until you change it If your remote is in TV Mode you must change the mode in order to operate your DVD or VCR satellite receiver or cable box For example if you are in VCR Mode and you wish to turn off your TV you must press the TV key first before pressing the ON OFF key Accessing and Selecting Menu Items Today s advanced components use on screen menus to help you navigat
16. er holding both keys down for three seconds the illuminated ON OFF key turns back on 8 Release both keys The illuminated ONeOFF key remains on 9 Refer to the Brand Codes in the enclosed Code Lists Press and release the appropriate brand code key using the number keys on the keypad The illuminated ON OFF key blinks once Tip Throughout the programming of each key be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control 10 Press and release the ON OFF key repeatedly until your component turns off Wait 4 seconds between each key press Each time you press the ON OFF key the illuminated ON OFF key blinks and the next code is sent The Brand Code Search begins with the first code in the chosen brand list for that component and cycles through all the codes for that brand If your component turns off you have found the correct code If it cycles through and the illuminated ON OFF key blinks four times and turns off all codes in the chosen brand lists have been searched The Brand Code Search mode is exited gt 11 Once you have found the correct code you must E save that code by pressing and releasing the STOP PIOR key The illuminated ON OFF key turns off You must press the STOP key to save the code or the correct code will not be stored 12 To confirm that the component key is programmed with the correct code for maximum functionality test the component
17. find the codes you programmed in and make a note of them in the boxes on this page If you used one of the Code Search methods to program your remote you will need to retrieve each component s four digit code Retrieving the actual code and writing it down will save you time if you ever need to program the remote again e g if programming is lost when you change the batteries If the codes are recorded you can use the Direct Entry method to reprogram your remote to control your components which is quick and easy 1 Press and hold the component key TV ON OFF ay N VCR DVD SAT CBL whose code you eo O D _ wish to retrieve The illuminated ON OFF o key turns on INFO 2 While holding the component key A down press and hold the INFO key The Ve illuminated ON OFF key turns off 3 After holding down both keys for three seconds the illuminated ON OFF key turns back on 4 Release both keys The illuminated ON OFF key remains on 5 Starting with the number 1 key press and release each number key on the keypad in the following order 1 9 then 0 The number that causes the illuminated ON OFF key to blink is the first number of the code As you find each number of the code refer to the code boxes below and write them down for future reference Note All TV codes begin with the number 1 all VCR codes begin with the number 2 all DVDs the number 3 and all satellite receivers and cable boxes the number 5 6 Repeat st
18. hich vary from state province to state province U S A Audiovox Electronics Corporation 150 Marcus Blvd Hauppauge New York 11788 CANADA Audiovox Return Center c o Genco 6685 Kennedy Road Unit 3 Door 16 Mississauga Ontario L5T 3A5 2007 Audiovox Accessories Corporation 111 Congressional Blvd Suite 350 Carmel IN 46032 Trademark s Registered RCR311W US 00
19. ing mode Follow these directions before proceeding to step 4 a Press and hold the VCR DVD key The illuminated ON OFF key turns on b While holding down the VCReDVD key press and release the number 2 key on the keypad to control a VCR or the number 3 key to control a DVD The illuminated ON OFF key turns off c Release the VCR DVD key The illuminated ON OFF key blinks four times and then turns off Your remote is now either in VCR or DVD Programming Mode depending on which you chose Proceed to step 4 Press and hold the component key TV VCR DVD SAT CBL you wish to program The illuminated ON OFF key turns on and remains on NeOFF 5 While holding the component key down 0 T press and hold the ON OFF key The a 0 gt illuminated ON OFF key turns off eats y 6 After holding down both keys for three seconds the illuminated ON OFF key turns back on 7 Release both keys The illuminated ONeOFF key remains on Tip Throughout the programming of each key be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control 8 Press and release the ON OFF key repeatedly waiting 4 seconds between each key press until your component turns off Each time you press the ON OFF key the illuminated ON OFF key blinks and the next code is sent This process continues until all of the codes in the Code Lists have been searched If your component turns off you hav
20. instead of the ON OFF key If you re trying to change channels try pressing the OK key after entering the channel number as this is a requirement of certain models and brands There is a possibility that a programmed code may only be able to control some of your component features e g only turns a component on and off See Testing the Code for Maximum Functionality page 4 for more information Problem The illuminated ON OFF key doesn t light when you press a key You must put the remote in the correct mode by pressing the corresponding component key TV VCR DVD SAT CBL so the remote knows which component you want to operate You may have pressed an invalid key for the mode the remote is in Make sure the batteries are fresh and are properly installed See Battery Installation on page 1 Replace the batteries with two new AA batteries if necessary Reprogramming may be required Problem The VCR won t record Make sure the remote is in VCR Mode Make sure the tape is properly loaded in the VCR Make sure the tape is not write protected If the safety tab is removed the tape is write protected and you cannot record onto that tape Problem The remote will not change channels on component You must put the remote in the correct mode by pressing the corresponding component key TV VCR DVD SAT CBL so the remote knows which component you want to operate Press the OK key after you
21. is entered the illuminated ONeOFF key turns on At this time release the component key If the illuminated ON OFF key turns off you have entered a valid code and have followed the correct procedure for Direct Code Entry If you enter a code number that is not in the Code Lists or you do not follow all of the steps for Direct Code Entry the illuminated ON OFF key blinks four times when the component key is released This is an indication that a programming error has occurred In that case repeat the Direct Code Entry process from step 3 Tip Throughout the programming of each key be sure to keep the remote pointed at the IR sensor of the component you are currently programming the remote to control 6 To confirm that the component key is programmed with the correct code for maximum functionality test the component Attempt to control a variety of the component s functions with the remote If some of the features of your components do not work try programming the remote with a different code in the list until you find the code that allows the remote to control the majority of your component s functions Different codes can provide different levels of functionality 7 Remember to enter the code for future reference in the box provided in the Code Retrieval section of this manual See page 5 Manual Code Search and Entry If your component s brand isn t listed in the Code Lists or if you have tried all of the codes for y
22. ng and releasing the ON OFF key Troubleshooting Problem The remote does not operate your component You must put the remote in the correct mode by pressing the corresponding component key TV VCR DVD SAT CBL so the remote knows which component you want to operate Remove any obstacles between the remote and the component Make sure to aim the remote at the IR sensor on the component Make sure the batteries are fresh and are properly installed See Battery Installation on page 1 Replace the batteries with two new AA batteries if necessary Reprogramming may be required Reset the remote Remove the batteries then press and hold the number 1 key on the remote for several seconds to reset the microprocessor inside the remote Release the number 1 key reinstall the batteries and press the ON OFF key If it lights up reprogram the remote and try again If it doesn t light up replace the batteries with new ones Problem The remote can t be programmed to operate your component Ifyou are testing the remote after you have entered the code you may be too far away from the component or at a wrong angle This remote uses IR infrared technology to communicate with components The remote sends the code and the component s IR sensor reads the code Therefore there must be an unobstructed path between the remote and the IR sensor on the component Move closer and make sure you point the remote at the component
23. nly works if you have found a code that controls your TV The timing mechanism for the Sleep Timer is built into your universal remote control To program the Sleep Timer follow these steps Programming the Sleep Timer 1 Press and release the TV key SLEEP 2 Press and hold the SLEEP key for three seconds Ge The illuminated ON OFF key turns on 3 Release the SLEEP key 4 Using the number keys enter the desired time in minutes from 1 99 minutes To set the timer to a number under 10 minutes first press 0 and then the desired number e g 05 for five minutes The illuminated ON OFF key blinks with each keypress 5 Once the second number is entered the illuminated ON OFF key turns off Tip Any keypress other than the number keys is ignored If you don t enter the sleep time within 10 seconds after pressing the SLEEP key you must start over at step 1 The illuminated ON OFF key blinks four times and then turns off indicating your attempt to program the Sleep Timer has been unsuccessful 6 The Sleep Timer is now set 7 Leave remote aimed at the TV Once the Sleep Timer is set you can continue to use the remote without affecting the Sleep Timer However because the timing mechanism for the Sleep Timer is built into the remote itself the remote must be in TV Mode and pointed at the TV to activate the Sleep Timer Canceling the Sleep Timer 1 The Sleep Timer program will be canceled and reset to zero by pressi
24. our brand and the remote does not operate your component try one of the Code Search methods below Manual Code Search or Auto Code Search Both Code Search methods cycle through all of the codes in the Code Lists in the event that your component s code is listed under another brand The Manual and Auto Code Search methods may take a long time because the remote searches through all of the codes in its memory for the code that operates your component Therefore if your brand is listed in the Brand Codes or the Code Lists first try the Brand Code Search or the Direct Code Entry methods described on pages 2 and 3 ha GoBACK ip To exit without saving at any point in the Manual Code Search press and release the GO BACK key 1 Manually turn on the component you want the remote to control Note If you press an invalid key during the Manual Code Search the remote does not respond and the search times out after two minutes When the search times out the illuminated ON OFF key blinks four times and turns off The last programmed code under that component key is retained 2 If you are programming the remote to control your TV satellite receiver or cable box go directly to step 4 3 To program the remote to control a VCR or DVD The VCR DVD key can control only one component either your VCR or your DVD To program your remote to control either your DVD or your VCR you must first put the remote in the proper programm
25. see if your component turns on again If your component does not respond continue to press the REVERSE key every two seconds until your component turns on again This will isolate the correct code in the last block of codes sent Each time the REVERSE key is pressed the illuminated ON OFF key blinks Note Ifyou accidentally press the REVERSE key after your component responds press and release the FORWARD key Then wait two seconds to see if your component turns off again T 10 Once your component turns off you have found STOP the correct code You must save the new code by pressing and releasing the STOP key The illuminated ON OFF key turns off You must press the STOP key to save the code or the correct code will not be stored 11 To confirm that the component key is programmed with the correct code for maximum functionality test the component Attempt to control a variety of the component s functions with the remote If some of the features of your components do not work different codes in the list can be tried until you find the code that allows the remote to control the majority of your component s functions See the section entitled Testing the Code for Maximum Functionality on page 4 for more information Code Retrieval Once you ve programmed the remote to control your components you may want to record the codes for future reference If you used the Direct Code Entry method this is easy Just
26. t purchased serviced or used outside the United States or Canada This Warranty is not transferable and does not extend to costs incurred for installation removal or reinstallation of the product This Warranty does not apply if in the Company s opinion the product has been damaged through alteration improper installation mishandling misuse neglect accident or the simultaneous use of different battery types e g alkaline standard or rechargeable THE EXTENT OF THE COMPANY S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL THE COMPANY S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT This Warranty is in lieu of all other express warranties or liabilities ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE SHALL BE LIMITED TO DURATION OF THIS WARRANTY IN NO CASE SHALL THE COMPANY BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES WHATSOEVER No person or representative is authorized to assume for the Company any liability other than expressed herein in connection with the sale of this product Some states provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitations or exclusions may not apply to you This Warranty gives you specific legal rights and you may also have other rights w
Download Pdf Manuals
Related Search