065-73051FXSCPOE User`s Manual
Contents
1. Humidity RH Max 90 non condensing 7 09 x 4 53 x 1 38 in W x D x H 180 x 115 x 35 mm Weight 1 28 Ibs 0 58 kg Certifications CE FCC ROHS Power over Ethernet Up to 15 4 watts for PoE PoE output 48 Volts DC PoE supply pin 3 6 for power and pin 1 2 for power Contact Information SIGNAMAX INC an AESP Company 999 N W 159th Drive Miami Florida 33169 U S A Phone 305 944 7710 Fax 305 949 4483 Sales 800 446 2377 Tech Support 800 446 2377 ext 201 Http www signamax com E mail info signamax com2. SIGNAMAX 065 73051FXSCPOE 4 port 10 100BaseT TX PoE plus 1 port 100BaseFX Multimode SC PoE Switch User s Manual Overview The Signamax 065 73051FXSCPOE PoE Switch complies with the IEEE 802 3af standard with Power over Ethernet supplied over Category 5 or better cable at distances within 100 meters supporting IEEE 802 3af terminal devices as a PoE Power Source Equipment PSE In addition when a device other than a PoE Powered Device PD is connected to a PoE equipped port the switch will not supply PoE power to that port ensuring safety for data only connections This device provides 15 4 watt power to up to four PoE capable ports using its internal power supply and also has one 100BaseFX SC multimode fiber port for built in backhaul capability It has a sturdy metal case in a desktop form factor wall mounting hardware is also included PoE switches supply power and transfer data by using network cables network cables do not require a qualified electrician to install them and can be located anywhere reducing the time and expense of having electrical power cabling installed The Signamax 065 73051FXSCPOE is the ideal choice for those who desire to economically deploy wireless access points IP cameras access control devices and IP telephones with 15 4 watt IEEE 802 3af power requirements Key Features EEE 802 3af Power over Ethernet PoE compliant Supports 10 100Mbps Fast Ethernet 4x 10 100Base
3. T TX Auto MDIX PoE ports 1x Fiber uplink port with multimode SC connector Internal power supply Provides up to 15 4 watts for PoE Automatically detects the PoE Power Class level of a Powered Device 1 Gbps switch backplane bandwidth for full wire speed non blocking reception and transmission Forwarding rate 100 Mbps 148 800 pps 10 Mbps 14 880 pps Status LEDs System Power PoE 100 Mbps and Link Activity Store and forward switching method Back pressure Flow Control for Half Duplex mode IEEE 802 3x Flow Control for Full Duplex mode Power saving technology powers down both unused ports and when a connected device is in standby mode Plug and Play for easy installation and use 5 year limited warranty User Guide 1 Check the PoE switch 1 2 Please check the enclosure the RJ 45 ports and the LED indicators making sure they are ok Connect the PoE switch to AC power making sure the initialization of the PoE switch occurs as below e POE indicator is off when power is connected e POW indicator is on and remains on after connection to AC power e Other indicators will be on then off after one or two seconds 2 Cable connection 1 Connect the Switch to Computer or other PD such as an IP camera or wireless AP by Cat 5 or better cables 2 Connect the external power cord to the Switch and the power cord to AC plug 3 Turn on the switch Caution 1 Al
4. l operation should be provided only by a qualified service technician 2 Make sure the PDs you connected to the Switch are compliant with IEEE 802 3af or 802 3at 3 Make sure the power is off before unplugging the AC power 4 Makes sure all PoE PDs power consumption is less than total power 5 Please avoid any heavy thing placed on the Switch 6 Do not use this product near water for example in a wet basement or near a swimming pool 7 Avoid using this product during an electrical storm There may be a remote risk of electric shock from lightning 8 For outdoor use the Switch itself should be housed inside a protective enclosure 9 Cutting power during a firmware upgrade can damage your device 10 Only use attachments accessories specified by the manufacturer 11 Opening the switch or tampering with the warranty sticker can void your warranty Technical Specifications Hardware Applicable IEEE 802 3 10BaseT Standards IEEE 802 3u 100BaseTX IEEE 802 3af Power over Ethernet PoE IEEE 802 3x Flow Control Sd 1 x Uplink port with SC Module Data Transfer ate Ethernet 107100 Mbps Halt Full Dupien Forwarding Rate 100 Mbps 146800 pps 10 Mbps 14 660 pps Switchingcapaciy ros oOoOoO i O Power Jmu zevs m LED insister Power POE Link ae Power Consumption Min 8 Watts standby PoE Max 48 Watts Temperate Operating 32 113 F 0 45 C P Storage 4 194 F 20 90 C
Download Pdf Manuals
Related Search